AVENTOS AVENTOS lift system AVENTOS HF bi-fold lift system A bi-fold lift system has never been so smooth The AVENTOS HF has a two-part front that folds together in the centre when opening. The bi-fold lift system is ideal for higher wall cabinets with large fronts because the handle remains easy to reach in any position. AVENTOS HF can also be used with fronts of different heights. Silent and effortless closing, thanks to BLUMOTION Easy to open Stops in any required open position Provides good access to cabinet interior Small programme, huge application variety Easy assembly and adjustment Stability, even with wide fronts Excellent durability Free positioning of handles No protruding parts Opening and closing easy and comfortable Lift systems open effortlessly with AVENTOS HF. Even heavy fronts only require light operating forces. The variable stop ensures that fronts always remain in the desired position Thanks to the integrated BLUMOTION, both heavy and light fronts close silently and effortlessly Other advantages that will inspire both you and your customers Excellent durability The core element of the lift mechanism is a robust spring package. The result: excellent durability No protruding parts Removable telescopic arm an advantage for furniture manufacturing and kitchen installation Includes a finger safety feature The CLIP top centre hinge with innovative technology ensures finger safety Similar shelves possible Depending on the height of the cabinet, 2 identical shelves can be used Catalogue 2009 36
AVENTOS lift system AVENTOS HF bi-fold lift system Overview AVENTOS AVENTOS HF bi-fold lift system Symmetric Fronts Wooden fronts and wide alu frames Narrow alu frames 38 40 Asymmetric fronts Wooden fronts and wide alu frames Narrow alu frames 42 44 Symbol photo Accessories Screw-on Centre bit Door buffer Screwdriver Cross slot bit 74 74 74 75 75 Opening angle stop Mounting plates Cover caps 75 154 161 Symbol photo Accessories hinge-set Wooden fronts Wooden fronts and wide alu frames Narrow alu frames 46 46 46 Symbol photo Assembly, removal and adjustment Warning and safety information Assembly Removal Adjustment Opening angle stop 48 48 51 49 51 Symbol photo Pictograph Item Available Upon Request Assembly, removal and adjustment General Information Accessories AVENTOS HF bi-fold lift system Wooden front Wide alu front Narrow alu front INSERTA-boss EXPANDO-boss Screw-on boss Planning Catalogue 2009 37
AVENTOS AVENTOS lift system AVENTOS HF bi-fold lift system Wooden fronts and wide alu frames symmetrical Product Description Power factor range - Ideal for wall cabinets with divided fronts - Cabinet heights 480-1040 mm - Cabinet widths up to 1800 mm - Silent and effortless closing, thanks to BLUMOTION - Light operating forces - Variable stop - Simple, tool-free assembly - 3-dimensional adjustment of both fronts - Simple, infinitely variable lift mechanism - Centre hinge with finger safety feature Power factor LF = Cabinet height KH (mm) x combined weight of both fronts & handle (kg) Power factor LF Lift mechanism 960-2650 2600-17250 13500-25900 1 pcs. 1 x set 3 pcs. We recommend the more powerful lift mechanism for overlapping areas. Ordering information 1 Lift mechanism set Power factor LF 2600-5500 (1 pc 960-2650) 5350-10150 9000-17250 (3 pc 13500-25900) Composed of: 1a Lift mechanism (symmetrical) 1c Cover cap large left/right 1d Cover cap round Chipboard screws Ø 4 x 35 mm 2 Telescopic arm set Cabinet height KH 480-570 mm 560-710 mm 700-900 mm 760-1040 mm Part no. 20F2200 20F2500 20F2800 10 x 20F3200 20F3500 20F3800 20F3900 Composed of: 2 Telescopic arm (symmetrical) 3 Mounting plate for telescopic arm All horizontal mounting plates with 0 mm distance Recommendation Screw-on* Knock-in * Use self tapping screws for wide alu frames Distance 0 mm Distance 0 mm 175H5400 177H5100 4 CLIP top 120 -hinge Boss Steel INSERTA unsprung 70T5590BTL Boss Screw-on* Steel unsprung 70T5550.TL Number of hinges, see front assembly * Use self tapping screws for wide alu frames 5 Mounting plate for CLIP top 120 -hinge Standard mounting plates, distance depends on the gap top Recommendation Screw-on Distance 0 mm 175H5400 6 CLIP top-centre hinge Boss Zinc EXPANDO unsprung 78Z553ET Boss Screw-on* Zinc unsprung 78Z5500T Number of hinges, see front assembly * Use self tapping screws for wide alu frames 7 Mounting plate for CLIP top-centre hinge Standard mounting plates with 0 mm distance Recommendation Screw-on* Distance 0 mm 175H5400 Note regarding wide alu frames below 55 mm frame width Only use cruciform mounting plates * Use self tapping screws for wide alu frames Accessories 10 Opening angle stop Nylon deep grey Part no. 104 83 20F7051 20F7011 Page instructions Overview AVENTOS 35 Hinge-set 46 Mounting plates 154 Accessories 74 Warning and safety information 48 Assembly and adjustment 48 Assembly devices 556 Reference values for door weights 664 Catalogue 2009 38
AVENTOS lift system AVENTOS HF bi-fold lift system Wooden fronts and wide alu frames symmetrical AVENTOS Planning Peg positions * Drilling depth 5 mm Fixing screw positions Space requirement 37 192 min 278 21 5 13.5 16 min 22 min 72.5 H X 1/2 1/2 TB 3-6 KH KH Cabinet height KH 480-549 mm H KH x 0.3-28 mm 550-1040 mm KH x 0.3-57 mm 4 x chipboard screws Ø 4 x 35 mm KH Cabinet height Front assembly CLIP top 120 -hinge CLIP top-centre hinge 21 37* F 66 12.5 SFA SFA Front overlay of the side panel Cabinet height KH 480-549 mm 550-1040 mm X Screws/EX- PANDO 68 mm 45 mm X Knock-in 70 mm 47 mm Number of hinges 3 hinges starting at cabinet width 1200 mm and/or 12 kg front weight 4 hinges starting at cabinet width 1800 mm and/or 20 kg front weight Drilling distance TB Front overlay FA 5 6 7 8 9 10 11 12 13 14 15 16 17 0 3 4 5 6 3 3 4 5 6 6 3 4 5 6 9 3 4 5 6 Mounting plate Min. gap F = 1.5 mm * 37 mm for cruciform mounting plates (37/32) Drilling distance TB Centre gap F 3 4 5 6 0 6 5 4 3 3 6 9 Mounting plate Screw-on INSERTA-/EXPANDO-assembly Space requirement 3-6 min 12.6 min 12.6 (12.8) 35 9.5 3-6 35 + 0.2 0 8 45 () INSERTA Opening angle stop without FH x 0.44 + 38 mm 104 FH x 0.24 + 34 mm 83 0 mm Y Catalogue 2009 39
AVENTOS AVENTOS lift system AVENTOS HF bi-fold lift system Narrow alu frames symmetrical Product Description Power factor range - Ideal for wall cabinets with divided fronts - Cabinet height 480-1040 mm - Cabinet width up to 1800 mm - Silent and effortless closing, thanks to BLUMOTION - Light operating forces - Variable stop - Simple, tool-free assembly - 3-dimensional adjustment of both fronts - Simple, infinitely variable lift mechanism - Centre hinge with finger safety feature Power factor LF = Cabinet height KH (mm) x combined weight of both fronts & handle (kg) Power factor LF 960-2650 2600-17250 Lift mechanism 1 pcs. 1 x set We recommend the more powerful lift mechanism for overlapping areas. Ordering information 1 Lift mechanism set Power factor LF 2600-5500 (1 pc 960-2650) 5350-10150 9000-17250 Composed of: 1a Lift mechanism (symmetrical) 1c Cover cap large left/right 1d Cover cap round Chipboard screws Ø 4 x 35 mm Part no. 20F2200 20F2500 20F2800 10 x 4 CLIP top 120 -aluminium frame door hinge Boss Screw-on Zinc unsprung 72T550A.TL Number of hinges, see front assembly 5 Mounting plate for CLIP top 120 -hinge Standard mounting plates, distance depends on the gap top Recommendation Screw-on Distance 0 mm 175H5400 2 Telescopic arm set Cabinet height KH 480-570 mm 560-710 mm 700-900 mm 760-1040 mm 20F3200 20F3500 20F3800 20F3900 Composed of: 2 Telescopic arm (symmetrical) 3 CLIP adapter plate for telescopic arms Distance 0 mm Left and right 175H5B00 6 CLIP top-aluminium centre hinge Boss Screw-on Zinc unsprung 78Z550AT Number of hinges, see front assembly 7 CLIP adapter plate for centre hinges Distance 0 mm Symmetrical 175H5A00 Accessories 10 Opening angle stop Nylon deep grey Part no. 104 83 20F7051 20F7011 Page instructions Overview AVENTOS 35 Hinge-set 46 Mounting plates 154 Accessories 74 Warning and safety information 48 Assembly and adjustment 48 Assembly devices 556 Reference values for door weights 664 Catalogue 2009 40
AVENTOS lift system AVENTOS HF bi-fold lift system Narrow alu frames symmetrical AVENTOS Planning Peg positions * Drilling depth 5 mm Fixing screw positions 37 192 Space requirement 21 13.5 5 16 Cabinet height KH 480-549 mm H KH x 0.3-28 mm 4 x chipboard screws Ø 4 x 35 mm KH Cabinet height 550-1040 mm KH x 0.3-57 mm Front assembly CLIP top 120 -aluminium frame hinge CLIP top-aluminium centre hinge 1/2 X 1/2 KH Cabinet height KH 480-549 mm X 54 mm 550-1040 mm 31 mm Number of hinges 3 hinges starting at cabinet width 1200 mm and/or 12 kg front weight 4 hinges starting at cabinet width 1800 mm and/or 20 kg front weight Screw-on (hinge/adapter plate) F = min. 1.5 mm An adjustment has to be made for frame thicknesses over 20.5 mm Space requirement R4 38 6 1.4 Opening angle stop Y * When changing material thickness, adjust the assembly dimensions accordingly without FH x 0.44 + 38 mm 104 FH x 0.24 + 34 mm 83 0 mm Catalogue 2009 41
AVENTOS AVENTOS lift system AVENTOS HF bi-fold lift system Wooden fronts and wide alu frames asymmetrical Product Description Power factor range - Ideal for wall cabinets with divided fronts - Cabinet height depends on the front height - Cabinet width up to 1800 mm - Silent and effortless closing, thanks to BLUMOTION - Light operating forces - Variable stop - Simple, tool-free assembly - 3-dimensional adjustment of both fronts - Infinitely variable setting for the lift mechanism - Centre hinge with finger safety feature - The larger front must be at the top! Power factor LF = Cabinet height KH (mm) x combined weight of both fronts & handle (kg) Power factor LF Lift mechanism 960-2650 2600-17250 13500-25900 1 pcs. 1 x set 3 pcs. Theoret. cabinet height TKH = Front height top FHo (mm) x 2 (incl. gaps) We recommend the more powerful lift mechanism for overlapping areas. Ordering information 1 Lift mechanism set Power factor LF 2600-5500 (1 pc 960-2650) 5350-10150 9000-17250 (3 pc 13500-25900) Composed of: 1a Lift mechanism (symmetrical) 1c Cover cap large left/right 1d Cover cap round Chipboard screws Ø 4 x 35 mm 2 Telescopic arm set Theoret. cabinet height TKH 480-570 mm 560-710 mm 700-900 mm 760-1040 mm Part no. 20F2200 20F2500 20F2800 10 x 20F3200 20F3500 20F3800 20F3900 Composed of: 2 Telescopic arm (symmetrical) 3 Mounting plate for telescopic arm All horizontal mounting plates with 0 mm distance Recommendation Screw-on* Knock-in * Use self tapping screws for wide alu frames Distance 0 mm Distance 0 mm 175H5400 177H5100 4 CLIP top 120 -hinge Boss Steel INSERTA unsprung 70T5590BTL Boss Screw-on* Steel unsprung 70T5550.TL Number of hinges, see front assembly * Use self tapping screws for wide alu frames 5 Mounting plate for CLIP top 120 -hinge Standard mounting plates, distance depends on the gap top Recommendation Screw-on Distance 0 mm 175H5400 6 CLIP top-centre hinge Boss Zinc EXPANDO unsprung 78Z553ET Boss Screw-on* Zinc unsprung 78Z5500T Number of hinges, see front assembly * Use self tapping screws for wide alu frames 7 Mounting plate for CLIP top-centre hinge Standard mounting plates with 0 mm distance Recommendation Screw-on* Distance 0 mm 175H5400 Note regarding wide alu frames below 55 mm frame width Only use cruciform mounting plates * Use self tapping screws for wide alu frames Accessories 10 Opening angle stop Nylon deep grey Part no. 104 83 20F7051 20F7011 Page instructions Overview AVENTOS 35 Hinge-set 46 Mounting plates 154 Accessories 74 Warning and safety information 48 Assembly and adjustment 48 Assembly devices 556 Reference values for door weights 664 Catalogue 2009 42
AVENTOS lift system AVENTOS HF bi-fold lift system Wooden fronts and wide alu frames asymmetrical AVENTOS Planning Peg positions * Drilling depth 5 mm Fixing screw positions Space requirement Theoret. cabinet height TKH H 480-549 mm TKH x 0.3-28 mm 550-1040 mm TKH x 0.3-57 mm 4 x chipboard screws Ø 4 x 35 mm TKH Theoretical cabinet height KH Cabinet height FHo Upper front height FHu Lower front height Front assembly CLIP top 120 -hinge CLIP top-centre hinge 21 TB 3-6 F 37* 66 FAu Lower front overlay SFA Front overlay of the side panel Theoret. cabinet height TKH 480-549 mm 550-1040 mm X Screws/EX- PANDO FHo / 2 + 68 mm FHo / 2 + 45 mm X Knock-in FHo / 2 + 70 mm FHo / 2 + 47 mm Number of hinges 3 hinges starting at cabinet width 1200 mm and/or 12 kg front weight 4 hinges starting at cabinet width 1800 mm and/or 20 kg front weight Drilling distance TB Front overlay FA 5 6 7 8 9 10 11 12 13 14 15 16 17 0 3 4 5 6 3 3 4 5 6 6 3 4 5 6 9 3 4 5 6 Mounting plate Min. gap F = 1.5 mm * 37 mm for cruciform mounting plates (37/32) Drilling distance TB Centre gap F 3 4 5 6 0 6 5 4 3 3 6 9 Mounting plate Screw-on INSERTA-/EXPANDO-assembly Space requirement 3-6 min 12.6 min 12.6 (12.8) 35 9.5 3-6 35 + 0.2 0 8 45 () INSERTA Opening angle stop without FH x 0.44 + 38 mm 104 FH x 0.24 + 34 mm 83 0 mm Y Catalogue 2009 43
AVENTOS AVENTOS lift system AVENTOS HF bi-fold lift system Narrow alu frames asymmetrical Product Description Power factor range - Ideal for wall cabinets with divided fronts - Cabinet height depends on the front height - Cabinet width up to 1800 mm - Silent and effortless closing, thanks to BLUMOTION - Light operating forces - Variable stop - Simple, tool-free assembly - 3-dimensional adjustment of both fronts - Infinitely variable setting for the lift mechanism - Centre hinge with finger safety feature - The larger front must be at the top! Power factor LF = Cabinet height KH (mm) x combined weight of both fronts & handle (kg) Power factor LF 960-2650 2600-17250 Lift mechanism 1 pcs. 1 x set Theoret. cabinet height TKH = Front height top FHo (mm) x 2 (incl. gaps) We recommend the more powerful lift mechanism for overlapping areas. Ordering information 1 Lift mechanism set Power factor LF 2600-5500 (1 pc 960-2650) 5350-10150 9000-17250 Composed of: 1a Lift mechanism (symmetrical) 1c Cover cap large left/right 1d Cover cap round Chipboard screws Ø 4 x 35 mm Part no. 20F2200 20F2500 20F2800 10 x 4 CLIP top 120 -aluminium frame door hinge Boss Screw-on Zinc unsprung 72T550A.TL Number of hinges, see front assembly 5 Mounting plate for CLIP top 120 -hinge Standard mounting plates, distance depends on the gap top Recommendation Screw-on Distance 0 mm 175H5400 2 Telescopic arm set Theoret. cabinet height TKH 480-570 mm 560-710 mm 700-900 mm 760-1040 mm 20F3200 20F3500 20F3800 20F3900 Composed of: 2 Telescopic arm (symmetrical) 3 CLIP adapter plate for telescopic arms Distance 0 mm Left and right 175H5B00 6 CLIP top-aluminium centre hinge Boss Screw-on Zinc unsprung 78Z550AT Number of hinges, see front assembly 7 CLIP adapter plate for centre hinges Distance 0 mm Symmetrical 175H5A00 Accessories 10 Opening angle stop Nylon deep grey Part no. 104 83 20F7051 20F7011 Page instructions Overview AVENTOS 35 Hinge-set 46 Mounting plates 154 Accessories 74 Warning and safety information 48 Assembly and adjustment 48 Assembly devices 556 Reference values for door weights 664 Catalogue 2009 44
AVENTOS lift system AVENTOS HF bi-fold lift system Narrow alu frames asymmetrical AVENTOS Planning Peg positions * Drilling depth 5 mm Fixing screw positions Space requirement Theoret. cabinet height TKH H 480-549 mm TKH x 0.3-28 mm 550-1040 mm TKH x 0.3-57 mm 4 x chipboard screws Ø 4 x 35 mm TKH Theoretical cabinet height KH Cabinet height FHo Upper front height FHu Lower front height Front assembly CLIP top 120 -aluminium frame hinge CLIP top-aluminium centre hinge FAu Lower front overlay Theoret. cabinet height TKH X 480-549 mm FHo / 2 + 54 mm 550-1040 mm FHo / 2 + 31 mm Number of hinges 3 hinges starting at cabinet width 1200 mm and/or 12 kg front weight 4 hinges starting at cabinet width 1800 mm and/or 20 kg front weight Screw-on (hinge/adapter plate) F = min. 1.5 mm An adjustment has to be made for frame thicknesses over 20.5 mm Space requirement R4 38 6 1.4 Opening angle stop Y * When changing material thickness, adjust the assembly dimensions accordingly without FH x 0.44 + 38 mm 104 FH x 0.24 + 34 mm 83 0 mm Catalogue 2009 45
AVENTOS AVENTOS lift system AVENTOS HF bi-fold lift system Accessories hinge-set Wooden fronts Hinge-set Fixing INSERTA/knock-in/EXPANDO Composed of: a b c d CLIP top 120 hinge unsprung CLIP top centre hinge without spring Horizontal cam mounting plate EXPANDO-cruciform mounting plate 6 x Part no. 78Z5530T10 70T5590BTL 78Z5530T 177H5100 174E6100.01 Wooden fronts and wide alu frames Hinge-set Fixing Screw-on* Composed of: a b c d CLIP top 120 hinge unsprung CLIP top centre hinge without spring Horizontal cam mounting plate Cruciform cam mounting plate 6 x Part no. 78Z5500T10 70T5550.TL 78Z5500T 175H5400 173H7100 * Use self tapping screws for wide alu frames Narrow alu frames Hinge-set Fixing Screw-on Composed of: a b c e f CLIP top 120 aluminium frame hinge without spring CLIP top alu centre hinge without spring Horizontal cam mounting plate CLIP adapter plate symmetric CLIP-adapter plate left/right Part no. 78Z550AT10 72T550A.TL 78Z550AT 175H5400 175H5A00 175H5B00 Catalogue 2009 46
AVENTOS lift system AVENTOS HF bi-fold lift system AVENTOS Catalogue 2009 47
AVENTOS HF (with or with-out SERVO-DRIVE) Blum UK Technical guide Assembly in just a few steps 1. The telescopic arms are attached to the lift mechanism using CLIP technology. Warning There is a danger of injury if the telescopic arm springs upward. Remove the telescopic arm rather than pushing it down. 2. The upper front is placed on the telescopic arm and CLIP top hinges are attached 3. CLIP top centre hinges are used to connect both fronts 4. The telescopic arm and lower front are connected to each other via the CLIP mechanism. Quick adjustment, precise adjustment, for balancing of doors 1. Simple and infintly variable: A power screwdriver is used to properly set the lift mechanism (Pozidriv, size 2). If the front falls when let go, it must be turned clockwise. If the front rises when let go, it must be turned anti-clockwise. 2. The telescopic arms adjust themselves by closing the front. They are fastened using the centre lever. This process also adjusts the tension in the front. 3. You can set the desired gap between the fronts using the CLIP top centre hinge. Blum U.K., Mandeville Drive, Kingston, Milton Keynes, GB-Buckinghamshire MK10 0AW, Tel.: 01908 285700 Fax: 01908 285701 Homepage: www.blum.com E-mail: info.uk@blum.com
Activating the Blum switch Set up the wireless connection between the SERVO-DRIVE switch and drive unit. Only two SERVO-DRIVE switches can be activated for any drive unit. Each switch can only be allocated to one SERVO-DRIVE unit. Press the <SWITCH> button until the LED flashes green. Within 30 seconds press the SERVO-DRIVE switch until LED lights up green constant, than goes off Repeat the process for additional SERVO-DRIVE switches in the cabinet. Additional features must be activated before the reference run. Activating synchronisation (If applicable) Activating collision avoidance (If applicable) For details please see http://servodrive.blum.com/aventos/en/ for futher details. Reference run The drive unit recognises the required parameteres using the reference run. Reference run is required: LED flashes orange - changes to constant once reference run is completed. Close the front manually Press on front Reference run starts automatically Front opens and closes 2x automatically Under no circumstances should you try to manually interrupt or stop the process If the reference run is interrupted, it should be reset (Reset Motion) and the reference run should be repeated. 2 Blum
AVENTOS fine adjustment The important steps at a glance
It's all about the proper settings
The AVENTOS lift systems open easily and close with perfect motion - at every stage the assembly is held in precise balance. However the following settings must be right: Adjustment of the lift mechanism to achieve the variable stop feature Simple spiral screw adjustment for perfect gap alignment AVENTOS HF for bi-fold lift systems 4 7 AVENTOS HS for up & over lift systems 8 9 AVENTOS HL for parallel lift systems 10 11 AVENTOS HK for stay lifts 12 13
AVENTOS HF 1. Variable stop Adjust the lift mechanism using a cordless drill so that the lift system remains in any desired position when opening. If... Then...... the lift system rises when you let go:... the lift system falls when you let go: + To adjust the lift mechanism to the respective door weight, always use a cordless drill (bit Pozidriv cross slot size 2, 39 mm). WARNING Please note the safety instructions on AVENTOS fittings. 4
2. Top gap design Gap alignment can be adjusted in all 3 dimensions with the CLIP top hinge, using a phillips screwdriver. (height, side, tilt of both fronts). If... Then... To adjust, open bracket on the telescopic arm (see page 7)
AVENTOS HF 3. Bottom gap alignment On the CLIP top centre hinge, the gap design is adjusted in 3 dimensions using a Phillips screwdriver If... Then... To adjust, open bracket on the telescopic arm (see page 7)
4. Front image Finally, optimise the vertical position of the lift system. To test, use the palm of your hand to lightly press on the fronts. If... Then... Note Open the locking lever on the telescopic arm when adjusting and then re-close when finished. 7
AVENTOS HS 1. Variable stop Adjust the lift mechanism using a cordless drill so that the lift system remains in any desired position when opening. If... Then...... the lift system rises when you let go:... the lift system falls when you let go: + To adjust the lift mechanism to the respective door weight, always use a cordless drill (bit Pozidriv cross slot size 2, 39 mm). WARNING Please note the safety instructions on AVENTOS fittings. 8
2. Gap alignment The lever arm allows all 3 dimensions to be adjusted using a Phillips screwdriver. If... Then... 9
AVENTOS HL 1. Variable stop Adjust the lift mechanism using a cordless drill so that the lift system remains in any desired position when opening. If... Then...... the lift system rises when you let go:... the lift system falls when you let go: + To adjust the lift mechanism to the respective door weight, always use a cordless drill (bit Pozidriv cross slot size 2, 39 mm). WARNING Please note the safety instructions on AVENTOS fittings. 10
2. Gap alignment The lever arm allows all 3 dimensions to be adjusted using a Phillips screwdriver. If... Then... 11
AVENTOS HK 1. Variable stop Set the lift mechanism using a cordless drill so that the lift system remains in any desired position when opening. If... Then...... the lift system rises when you let go:... the lift system falls when you let go: + To adjust the lift mechanism to the respective door weight, always use a cordless drill (bit Pozidriv cross slot size 2, 39 mm). WARNING Please note the safety instructions on AVENTOS fittings. 12
2. Gap alignment The lever arm allows all 3 dimensions to be adjusted using a Phillips screwdriver. If... Then... 13
Perfecting motion 14
Blum innovations have become milestones in furniture hardware manufacturing. Customer-oriented, reliable, competent Kitchen buyers are the centre of our business. In order to meet all of their needs, we continue to develop the right products and services for our customers and in the process prove ourselves to be a reliable and secure partner. By engaging in dialogue together we discover new opportunities to perfect motion. In this way, we can optimise and upgrade our products and services for our customers around the globe thus benefiting everyone: Furniture manufacturers, furniture salespersons, furniture installers and furniture buyers. Our decades-old philosophy is to provide real advantages to each of our customers (throughout the supply chain). Blum innovations have become milestones in furniture hardware manufacturing. Helping you to provide high quality furniture and inspiration for your customers, through a partnership of design and function. Our goal is to make opening and closing furniture an emotional experience. "Perfecting motion" is our motto. It incorporates everything that is the best about the Blum brand. 15
IDNR: 469.472.4 EP-111/1EN-AL/02.08-1 Blum Julius Blum GmbH Furniture Fittings Mfg. 6973 Höchst, Austria Tel.: +43 5578 705-0 Fax: +43 5578 705-44 E-mail: info@blum.com www.blum.com