BeMACROn Disperse dyes with the latest technology for high-performance polyester dyeing. UniqUe ideas. UniqUe solutions.
BeMaCRon -ltd New generation of BEMACRON dyes under slightly conditions due to BEMACRON dyes, the dyes of the BEMACRON -LTD (low temperature BeMaCRon saponified under the slightly for the specifications of EN 1 for the specified shades of EN 110 for fibre blends such as /elastane which are sensitive to All BEMACRON -LTD dyes have Washing fastness 0 C 2) 2 2 Yellow -LTD 01 0.1 % 0. % - Orange -LTD 01 0.2 % 1.3 % Red -LTD 01 0.2 % 1.2 % - - - Rubine -LTD 01 0.2 % 1.0 % - Blue -LTD 0.2 % 1.3 % - - - - - - - - - - - - - Dark Blue -LTD 01 1.1 % 2.2 % - - - - - - - - - / /WO free free free free 0, 0, free free free free free free
BeMaCRon -ltd New generation of BEMACRON dyes under slightly conditions due to BEMACRON dyes, the dyes of the BEMACRON -LTD (low temperature BeMaCRon saponified under the slightly fibre blends such as /elastane which are sensitive to All BEMACRON -LTD dyes have 2 2 Black -LTD 1. %. % for the specifications of EN 1 for the specified shades of EN 110 for Washing fastness 0 C 2) / /WO - - - - - 0.3 free BEMACRON -LTD
BeMaCRon -ltd New generation of BEMACRON dyes under slightly conditions due to BEMACRON dyes, the dyes of the BEMACRON -LTD (low temperature BeMaCRon saponified under the slightly for the specifications of EN 1 for the specified shades of EN 110 for fibre blends such as /elastane which are sensitive to All BEMACRON -LTD dyes have Washing fastness 0 C 2) 2 2 Citron -2G 0.1 % 0.9 % Yellow -G 0.1 % 0. % - - - - - Yellow -2R 0.1 % 0. % - - - - Orange -3B 0.3 % 1. % - Carmine -2G 3) 0. % 2.2 % - Red -B 0.2 % 1. % - - - - - - - - - - 3- - 3 3 3- - - - - / /WO ) free free free,9 free free free free free free free free
BeMaCRon -ltd New generation of BEMACRON dyes under slightly conditions due to BEMACRON dyes, the dyes of the BEMACRON -LTD (low temperature BeMaCRon saponified under the slightly fibre blends such as /elastane which are sensitive to All BEMACRON -LTD dyes have 2 2 Red -2BL 0. % 2. % - Red -BS 0.1 % 0.8 % - - Rubine -3B 0.3 % 1. % - - Cyan -G 0. %. % - for the specifications of EN 1 for the specified shades of EN 110 for Washing fastness 0 C 2) / /WO - - - - - - - - - - - 3- - - free free free free free free free free BEMACRON
BeMaCRon -ltd New generation of BEMACRON dyes under slightly conditions due to BEMACRON dyes, the dyes of the BEMACRON -LTD (low temperature BeMaCRon saponified under the slightly for the specifications of EN 1 for the specified shades of EN 110 for fibre blends such as /elastane which are sensitive to All BEMACRON -LTD dyes have Washing fastness 0 C 2) 2 2 Blue -3R 0.3 % 1. % - Navy -RT 1.2 % 2. % - - Black -RT 1. %. % - - - - - - - - - - - 3 / /WO free 1,2 2, free free free
BeMaCRon -ltd New generation of BEMACRON dyes under slightly conditions due to BEMACRON dyes, the dyes of the BEMACRON -LTD (low temperature BeMaCRon saponified under the slightly for the specifications of EN 1 for the specified shades of EN 110 for fibre blends such as /elastane which are sensitive to All BEMACRON -LTD dyes have Washing fastness 0 C 2) 2 2 Luminous Yellow SEL-EN 0.1 % 0. % Luminous Yellow SEL-8G 0. % 2.8 % 3-3- 2-3 Luminous Orange SEL-EN 0. % 3.1 % Luminous Red SEL-G 0. %.0 % 3 - - - 3 - - - - - - - - 2-3 2 3- - Luminous Red SEL-B 0. %.0 % / /WO 3, free free free free free free free free free
1) Method of determination: DIn en 18. 2) Post-heat setting 30 s at 180 C 3) Dye recommended for an application concentration of 1.0 % and higher. The use of BeMACROn Rot Se-G is advantageous for application concentrations below 1.0 %. ) not recommended for cross-wound packages and warping beam dyeing The BeMACROn range does not contain any dyes which can be split into amines of the MAC classes III A1 und A2, no dispersing agents containing phenol and no fungicides.
Fastness information: The fastness properties stated on the shade card were determined with SD dyeing on polyester. exceptions are the navy dyes (2/1 SD) and black dyes ( SD). All stated fastness values are based on dyeings of the individual dyes. DIn en ISO 10-B02 DIn en ISO 10-B0 Washing fastness 0 C DIn en ISO 10-C0/C2S Perspiration fastness DIn en ISO 10-e0 Chlorine bath water fastness DIn en ISO 10-e03 fixation DIn en ISO 10-P01 : These dyes cover fabric-related stripes very effectively. Depending on the shade and colour intensity, these dyes cannot cover texture differences and other fabric-related variations completely. These dyes cannot compensate for differences in the fabric. suitability for blends: Suitable Suitable with restrictions not suitable dyeing process: High-temperature process (130 C) at 98 110 C with the addition of carriers Continuous process Recommended Recommended in some cases not recommended The fastness properties of the dyed shades shown on the shade card on polyester correspond to and 1/ SD. exceptions are the navy dyes ( und 2/1 SD) and black dyes ( and SD). The appearance of dyes can vary due to different manufacturing methods. However, this does not affect the colour on the textile or the dye properties and fastnesses. The colour intensity is normally set to 100 %. Deviations are listed in the current commercial forms leaflet. The data contained in this shade card is given to the best of our knowledge and belief. It does not guarantee specific product properties. All information is subject to change without notice.
09/1_en BeZeMa ag Kriessernstrasse 20 CH-92 Montlingen Tel +1 1 3 88 11 Fax +1 1 3 88 88 www.bezema.com bezema@bezema.com CHt R. BeitliCH GMBH Bismarckstraße 102 D-202 Tübingen Tel +9 01 1-0 Fax +9 01 1-290 www.cht.com info@cht.com