Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version Features... 156 Ordering Information... 157 Specifications... 158-159 Technical Data... -1 Dimensions... 2 Options... 3-4 Sensors... 5 Spare Parts... 6 DL RC P1Z P1X OSP-P 149 lendale Heights, Illinois
Basic Version / Features Basic Version Hard anodized aluminum carriage Endplate Air supply ports Non magnetic stainless steel tube (cylinder body) Mounting holes to attach the load onto the carriage Mobile piston 36 External magnets (built into the carriage) 36 Internal magnets (on the piston) Description The magnetic rodless cylinder is a pneumatic cylinder featuring a mobile piston fitted with annular magnets. The mobile carriage is also equipped with magnets to provide magnetic coupling between the piston and carriage. It incorporates the following features: - end of stroke cushioning/bumpers - mounting: threaded endcaps optional foot mount optional flange mount Cushioning Ø mm: non-adjustable bumper or adjustable pneumatic cushioning Ø and mm: adjustable pneumatic cushioning Mounting The mobile carriage is free to rotate 36 around the cylinder axis. This feature facilitates the adaptation of the cylinder to various mounting arrangements. The load must be guided by an external device. 15 lendale Heights, Illinois
Basic Version / Ordering Information Standard cylinder (15 positions) Options ( positions) P 1 Z M 1 6 S N N 5 B F M N Bore Cushioning Strokes Mounting Kit* Ø mm N None (Ø only) mm F Footmount Ø mm A Adjustable Cushions 1 1 mm L Flanges Ø mm N None (std.) Options * Ports B None M Metric (Ø only) W With options B BSPP (Ø & ) Standard when B option is used. R BSPT (Ø & ) N NPTF (Ø & ) * Cylinders are supplied with mounting nuts fitted on each endplate. Ø Stroke (mm) (in) to 1 to 39.4 to 15 to 59.1 to to 78.7 Order code examples: - P1ZMSNN1B Ø mm bore 1 mm stroke cylinder supplied with mounting nut on each endplate - P1ZMSAN1WFBN Ø mm bore 1 m stroke cylinder with foot mount on each endplate DL RC P1Z P1X OSP-P 151 lendale Heights, Illinois
Basic Version Specifications eneral Features Magnetic Rodless cylinder, basic version Available in 3 bores with stroke lengths up to mm. Adjustable air cushioning is available on all cylinders. The load is fixed onto the mobile carriage by 4 tapped holes. The cylinder is attached by the ends with jam nuts, flanges or foot mounts. Specifications for Magnetically Coupled Rodless Operating Medium Compressed Air Maximum Pressure - Bar (PSI) 7 (1) Minimum Pressure - Bar (PSI) 2 (29) Bore Size mm (inch nominal) (5/8) (3/4) (1 1/4) Port Size M5 BSPP, 1- NPT 1/8 BSPP, 1/8 NPT 1/8 BSPP, 1/8 NPT Ambient Temperature F ( C) 15 to 14 F (-1 to C) Maximum Stroke mm (inch) 1 (39.4) 15 (59.1) (78.7) Stroke Tolerance mm +1.5/- <=1 +1.5/-; >1 +2/- Piston Speed m/s (inch/sec).1 to.4 (4 to 15.75) Max. Coupling Force N (Lbs) 157 (35) 236 (53) 73 (158) Cushion Air Cushion Standard Lubrication Not Required (If you choose to lubricate your system, continuing lubrication will be required.) Technical Data Bore Size Weights Weight at Zero Stroke Weight per 25mm of Stroke mm inch kg lbs kg lbs 5/8.28.62.1.2 3/4.46 1.1.2.5 1-1/4 1.35 2.98.4.8 Conditions of Use If external lubrication is added, this must always be continued. Working medium, air quality Working medium Dry, filtered compressed air to ISO 8573-1 class 3. 4. 3. or better Recommended air quality for cylinders For best possible service life and trouble-free operation, ISO 8573-1. quality class 3.4.3 should be used. This means 5 µm filter (standard filter), dew point +3 C for indoor operation (a lower dew point should be selected for outdoor operation) and oil concentration 1. mg oil/m³, which is what a standard compressor with a standard filter gives. ISO 8573-1 Quality Classes Quality Class Max. Pollution Water Oil particules size (µm) max. concentration (mg/m³) max. pressure dew point ( C) max. concentration (mg/m³) 1.1.1-7.1 2 1 1-4.1 3 5 5-1. 4 15 8 +3 5. 5 4 1 +7 25 6 +1 152 lendale Heights, Illinois
Basic Version Technical Data Pressure in the Cylinder / Pneumatic Holding Force Holding Force (N) Pressure (PSI) 29 44 58 73 87 12 5 112 45 4 35 3 25 15 1 5 2 3 4 5 6 7 Pressure (Bar) 9 67 44 22 Holding Force (lbs) Example: Pressure: 5 bar Fmax = 2 N for Ø mm cylinder! Calculate the kinetic energy due to the load moved Acceleration or deceleration should not exceed the magnetic coupling force of cylinder Load Diagrams Permissible radial loads, horizontal mounting! L L The load must be guided by a device from outside the cylinder Load "L" (kg) 12 1 8 6 4 2 5 1 15 Stroke (mm) Ø L Max. (kg) (lbs.) 3 6.6 5 11. 1 22. Permissible axial loads, horizontal mounting Zf! M = Fx * Zf Fx The load must be guided by a device from outside the cylinder Permissible axial loads, vertical mounting Xa L Load La * If force due friction is unknown, use.1 (L + La). Force "Fx" (N) Load "LT" (kg) 5 4 3 1 3 25 15 1 5 5 15 25 35 5 Zf (mm) 2 3 4 5 6 7 Pressure (Bar) Ø Max. Max. Moment M Fx* (Nm) (in-lbs.) (N) (lbs.) 1.2 11 112 25 2.5 22 175 39 8.5 75 45 11 * at 7 bar Ø Max. load Max. T XA (kg) (lbs.) (mm) (in.) 5 11 122 4.8 1 22 142 5.6 24 53 174 6.8 * at 6.5 bar DL RC P1Z P1X OSP-P L = Load guided by external device La = Direct mounting onto the cylinder Ff = Force due to friction* LT = Load weight + guiding device weight + force due to friction 153 lendale Heights, Illinois
Basic Version Dimensions Dimensions ** = Air supply Ports F **P 4xMN **P F EV N O M ØD 2xNN H L LJ AA EH FV E E A B S + STROKE B TL + STROKE Ø A AA B ØD E Ø EH Ø EV F FV H L LJ M N O (1.26) 38 (1.5) 6 (2.36) 34 (1.34) 4 (1.57) 6 (2.36) 1 (.39) 14 (.55) (.63) 18 (.71) 22.8 (.9) 35 (1.38) 11 (.43) 17 (.67) 17 (.67) 18 (.71) 28 (1.1) 4 (1.57) 18 (.71) 24 (.94) 36 (1.42) 4 (.) 8 (.31) 8 (.31) 14 (.55) 26 (1.2) (1.26) 5.5 (.22) 9.5 (.37) 9.5 (.37) 15.5 (.61) 22 (.87) 23 (.91) 61 (2.4) 71 (2.8) 87 (3.43) (.63) 19 (.75) 3 (1.18) 34 (1.34) 4 (1.57) 5 (1.97) 25 (.98) 3 (1.18) 4 (1.57) 13.5 (.53) 15.5 (.61) 18.5 (.73) Ø P MN NN S TL M5 x.8 (1-) 1/8 (1/8) 1/8 (1/8) M4 x.7 x 6 M1 x 1 x 6 M5 x.8 x 8 M x 1.5 x 7 M6 x 1 x 1 M26 x 1.5 x 7 92 (3.62) 115 (4.53) 133 (5.24) 112 (4.41) 143 (5.63) 5 (6.5) 154 lendale Heights, Illinois
t Catalog 9P-E Basic Version / Mountings Mountings Flanges Only on Ø mm 4xØFD FZ 2xF FY FZ FX FW FX FW T LS + STROKE T Ø F ØFD FW FX FY FZ T LS Order Code 5.2 (.) 6 (.24) 7 (.28) 42 (1.65) 52 (2.5) 8 (3.15) 33 (1.3) 4 (1.57) 64 (2.52) (.78) 28 (1.1) (.79) (1.26) 44 (1.73) 2.3 (.9) 3 (.12) 5 (.) 92 (3.62) 115 (4.53) 133 (5.24) PDC15-FH PK1A-FH PK1A25-FH Brackets Only on Ø mm LH LH LK LJ LY LX LF L 2xLE LY LX LF L 2xØLD LS + STROKE XL + STROKE LC DL RC P1Z P1X OSP-P * Set of 2 pcs ** Impossible mounting LT + STROKE XM + STROKE Ø t L LC ØLD LE LF LH LJ LK LX LY LS LT XL XM Order Code 2.3 (.9) 3 (.12) 3 (.12) 14.8 (.58) 28 (1.1) 35 (1.38) 8.8 (.35) 18 (.71) 23 (.91) 6.2 (.24) 7 (.28) 5.2 (.) 6 (.24) 1 (.39) 12 (.47) 14 (.55) 23 (.91) 3 (1.18) (.63) 19 (.75) 3 (1.18) -2 (-.8) 4 (.) () 33 (1.3) 3 (1.18) 46 (1.81) 42 (1.65) 43 (1.69) 62 (2.44) 19.6 (4.) 151 (5.94) 179 (7.5) 79 (3.11) 85 (3.35) ** 121.6 (4.79) 171 (6.73) 3 (7.99) 96.6 (3.8) 121 (4.76) PDC15-LB* PK1A-LB* ** PK1A25-LB* 155 lendale Heights, Illinois
uided Version / Features uided Version Rail for mounting sensors laterally (on one side only shown on rear side) Endplate Mounting holes Chrome plated steel guide rods Adjustable Bumpers (Optional: hydraulic shock absorbers) Non magnetic stainless steel (cylinder body) Hard anodized aluminum carriage Ports on one side only on one of the endplate (transfer porting option) uide bushings Holes to mount the load onto the carriage Internal magnets (on the piston) Mobile piston External magnets (built into the carriage) Description The magnetic rodless cylinder is a pneumatic cylinder featuring a mobile piston with annular magnets. The mobile carriage is also equipped with magnets to give magnetic coupling between the piston and carriage. The carriage slides along the main tube and is guided by two guide rods. It incorporates the following features: - Built-in guide rods - Adjustable end-of-stroke bumpers - Optional magnetic piston sensing - Optional transfer porting uidance The guided version consists of a carriage fitted with 4 plain bearings, guided on 2 rods. This design provides high rigidity, accurate guidance and smooth movement of the carriage. End of Stroke Each endplate can be fitted with an adjustable bumper or self-compensating shock absorbers. Optional transfer porting Cylinder air supply is located on one end only to facilitate cylinder installation and avoid long tube lengths for longer strokes. Options The following options are available to enhance the Magnetic Rodless cylinder functions: External bumpers: when low operating pressure, light loads and short strokes. External hydraulic shock absorbers: recommended for arduous applications. Reed and solid state sensors: provide sensing at an adjustable position along the entire stroke of the cylinder. 156 lendale Heights, Illinois
uided Version / Ordering Information Standard version (15 positions) Options (18 positions) P 1 Z M 1 6 T N N 5 B N M L Bore Cushioning Strokes Cyl. Port type Ø mm N No stops** mm M Metric (Ø only) Ø mm C Adjustable stop 1 1 mm B BSP (Ø and ) Ø mm H Hydraul. shock absorber R BSPT (Ø and ) N NPTF (Ø and ) Function uided T uided with transfer porting Options B None W With options End of stroke sensing NPN PNP Reed Sensors type (Qty: 2) L With rail, no sensor D K S.3 m with 8mm connector ** Do not exceed coupling force on deceleration. Ø Maximum Strokes (mm) (in.) to 75 to 29.5 to 1 to 39.4 to 15 to 59.1 A H C 3 m flying leads F U B 1 m flying leads W E.3 m with M12 connector N (std.) No sensor rail P Proximity sensor in end caps Standard when B option is used. DL RC P1Z P1X OSP-P Order code examples: - P1ZMCN1B mm bore, 1 mm stroke cylinder supplied with adjustable stop - P1ZMHN1WNBL mm bore, 1 m stroke cylinder supplied with hydraulic shock absorbers and rail for sensors 157 lendale Heights, Illinois
uided Version / Range & Options Range Magnetic Rodless Cylinder, guided version Available in 3 diameters with possible strokes up to 15 mm (59 in). 4 tapped mounting holes on the carriage. Endcap mounting provided by 4 tapped and counterbored holes. Options External adjustable bumpers Can be fitted on cylinder endcaps and provide noise reduction and adjustment at the end of stroke. Used when light loads and short strokes. Pneumatic air supply on one side only (transfer porting option). External hydraulic shock absorbers Self-compensating hydraulic shock absorbers can be used instead of bumpers for a greater cushioning effect at the end of stroke. They are recommended for arduous applications. Reed or Solid State Sensors: A rail fitted on one side only of the cylinder provides mounting and position adjustment of sensors. The rail is located on same side as the end of stroke stops. 158 lendale Heights, Illinois
uided Version / eneral Features eneral Features Specifications for Magnetically Coupled Rodless Operating Medium Compressed Air Maximum Pressure Bar (PSI) 7 (1) Minimum Pressure Bar (IPS) 2 (29) Bore Size mm (inch nominal) (5/8) (3/4) (1 1/4) Port Size M5 BSPP, 1- NPT 1/8 BSPP, 1/8 NPT 1/8 BSPP, 1/8 NPT Ambient Temperature F ( C) 15 to 14 F (-1 to C) Maximum Stroke mm (inch) 75 (29.5) 1 (39.4) 15 (59.1) Stroke Tolerance mm +1.5/- <=1 +1.5/-; >1 +2/- Piston Speed m/s (inch/sec).1 to.4 (4 to 15.75) Max. Coupling Force N (Lbs) 157 (35) 236 (53) 73 (158) Cushion Air Cushion Standard Lubrication Not Required (If you choose to lubricate your system, continuing lubrication will be required.) Bore Size Weights Weight at Zero Stroke Weight per 25mm of Stroke mm inch kg lbs kg lbs 5/8.9 1.98.5.11 3/4 1.52 3.35.8.17 1-1/4 3.63 8..13.29 Options Function Description Detection Sensors mounting in T-slot Reed or solid state sensors (PNP or NPN) External rubber bumpers Supplied pre-fitted in endplates if chosen Hydraulic shock absorbers Self-compensating shock absorbers supplied pre-fitted in endplates if chosen DL RC P1Z P1X OSP-P 159 lendale Heights, Illinois
uided Version / Technical Data Pressure in the Cylinder / Pneumatic Holding Force Holding Force (N) Pressure (PSI) 29 44 58 73 87 12 5 112 45 4 35 3 25 15 1 5 2 3 4 5 6 7 Pressure (Bar) 9 67 44 22 Example: Pressure: 5 bar (73 PSI) Fmax = 2 N (72 lbs.) for Ø mm cylinder! Calculate the kinetic energy due to the load moved. Acceleration or deceleration should not exceed the magnetic coupling force of cylinder. Load Diagrams Permissible radial loads, horizontal mounting L 35 3 25 15 1 5 5 75 1 125 15 Stroke (mm) Ø Max. L (kg) (lbs.) 7 15 12 26 3 66 Permissible axial loads, horizontal mounting M = Fx * Zf Ms = Fy * Zf Mv = Fx * Yf Fx Fy Fx Zf Zf Yf Holding Force (lbs) Load "L" (kg) Ø Max. Max. Max. moment M moment Ms moment Mv (Nm) (in-lbs.) (Nm) (in-lbs.) (Nm) (in-lbs.) 2.4 21.5 4.4 2.4 21 5 44 1 8.9 5 44 15 133 3 26.6 15 133 lendale Heights, Illinois
uided Version / Technical Data Loads Diagram Permissible axial loads, vertical mounting Ø Max. Max. Load LT* XA (kg) (mm) 5 122 1 142 24 174 * at 6.5 bar Load "LT" (kg) 3 25 15 1 5 XA 2 3 4 5 6 7 Pressure (Bar) L = Load guided by external device LA = Mounting direct onto cylinder Charge LA M = LA * XA LT = Load weight + guiding device weight + force due to friction Ff* = Force due to friction *If force due to friction is unknown, use.1 * (L + LA) Mv = Fy * Yf Yf Fy L DL RC P1Z P1X OSP-P 1 lendale Heights, Illinois
uided Version / Dimensions Dimensions TL + STROKE TT S + STROKE T 4xMN A 2xPP N Ø D B O M W Ød A L TA + STROKE A C 12 According to C view 4xM3x.5 5 3 XA XB 3 12 PW P According to B view HT **P **P HS 2xNN 4xF A-A 4xØC 4xØB H CC HP ** = Air supply ports H Ø A ØB ØC CC ØD Ød F H HP H HS HT L M N MN 8 4.3 8 4.5 17.4 12 6 34 33.5 25 12 21.5 65 34 3 M5x.8 x 1 M5 x.8 x 8 (.31) (.17) (.31) (.18) (.69) (.47) (.24) (1.34) (1.) (.98) (.47) (.85) (2.56) (1.34) (1.18) 8 (.31) 13.5 (.53) 5.5 (.22) 8.7 (.34) 9.5 (.37) 14 (.55) 6.5 (.26) 8 (.31) 21.4 (.84) 33.6 (1.) (.63) (.79) M6x1 x 1 M1x1.5 x 15 6 (.24) 1 (.39) 42 (1.65) 66 (2.6) 4 (1.57) 64 (2.52) 28 (1.1) 46 (1.81) 12 (.47) (.79) 23.5 (.93) 41 (1.61) 75 (2.95) 91 (3.58) 4 (1.57) 6 (2.36) 36 (1.42) 5 (1.97) M6 x 1 x 1 M8 x 1.25 x 12 Ø NN O P P PW PP T TT S TA TL W XA XB M1 x 1 x 6 M14 x1.5 x 7 M x 1.5 x 7 15.5 (.61) 17.5 (.69) 15.5 (.61) M5 x.8 1/8 1/8 5 (1.97) 61 (2.4) 86 (3.39) 7 (2.76) 9 (3.54) 122 (4.8) 27 (1.6) (1.26) 5 (1.97) 14 (.55) 17 (.67) (.79) 23 (.91) 26 (1.2) 28 (1.1) 69 (2.76) 79 (3.11) 97 (3.82) 81 (3.19) 91 (3.58) 117 (4.61) (4.17) 122 (4.8) 145 (5.71) 68 (2.68) 88 (3.46) 118 (4.65) 17 (.67) (.79) 22 (.87) 8 (.31) 11 (.43 14 (.55) 2 lendale Heights, Illinois
uided Version / Options Courbes Optional External Adjustable Bumpers Dimensions B NN E E NN C AA AB D Ø AA AB B C D E NN 7.5 (.3) 6.5 (.26) 12 (.47) 1 (.39) 14 (.55) 4 (.) M1 x 1 1 (.39) 1 (.39) 11 (.43) 14.5 (.57) 18 (.71) 4 (.) M14 x 1.5 11 (.43) 12 (.47) (.79) 18 (.71) 26 (1.2) 8 (.31) M x 1.5 External Hydraulic Shock Absorbers Loads / Speeds diagram The diagram to the right exhibits the P1Z cylinders maximum capacities with an adjustable bumper. If the intersection exhibits between speed and load is above the curves, it is imperative to use hydraulic shock absorbers to prevent cylinder damage. Load (kg) Speed (in/s) 35 4 8 12 3 Ø 66 25 15 1 5 Ø Ø.1.2.3.4 Speed (m/s) 44 22 Load (lbs.) DL RC P1Z P1X OSP-P Example: Ø mm cylinder with a.3 m/s speed and 25 kg load Choose the hydraulic shock absorber option Ø mm cylinder with.2 m/s speed and 1 kg load Choose the adjustable bumpers option 3 lendale Heights, Illinois
uided Version / Options Optional External Hydraulic Shock Absorbers Dimensions NN E E NN D C AA AB B Ø AA AB B C D E NN 18 (.71) 27 (1.6) 12 (.47) 1 (.39) 13 (.51) 3 (.12) M1 x 1 5 (1.97) 59 (2.) 11 (.43) 14.5 (.57) 17 (.67) 5 (.) M14 x 1.5 56 (2.) 66 (2.6) (.79) 18 (.71) 24 (.94) 6 (.24) M x 1.5 Optional Sensor Rail Dimensions 2 1 (.47) 6. 8 (.27) 2 (.8) (.79) 3.5 (.14) 1 2 (.47) 3.4 (.13) 5.55 (.22) 4 lendale Heights, Illinois
uided Version / Technical Data Detection Reed or Solid State Sensor mounting is possible on one cylinder side only. External aluminum profile integrates 1 T-slot for sensor mounting. Dimensions (mm) Drop-in lobal Sensor Sensors with connection at 9 4.5 31.5 5.3 Technical Data (see Electronic Sensors Section) DL RC P1Z P1X OSP-P 1.3 6.7 5 lendale Heights, Illinois
Spare Parts Spare Parts End of stroke rubber bumpers (2 pieces) Ø Order Code 912969AS 912961AS 9129611AS End of Stroke Hydraulic Shock Absorber (1 piece) Ø Order Code MC25MH-NB MC15MH SC3M-3 NB Flow Controls (1 piece) Ø Order Code BSP Ports NPT Ports Metric Ports 87633 PTFL4PB6-1/8 87634 PTFL4PB6-1/8 87634 Repair Kits Ø Basic Version uided Version (Cushioned) P1ZMSAN-R (Non-cushioned) P1ZMSNN-R P1ZMNN-R P1ZMSAN-R P1ZMNN-R P1ZMSAN-R P1ZMNN-R 6 lendale Heights, Illinois