Date: Customer: Project: Type: Qty: Saturn Cutoff LED Order Code: SACL Series - - - - - - - - SACL Saturn Cutoff LED Pole Order Code: - - - Series Height Finish Options Optics R Type I Distribution R Type II Distribution R Type III Distribution R5 Type V Distribution Mounting Single A Single Arm Mount Double W Wall Mount Light Engine LG4500 500 ma/5w LG4700 700 ma/65w LG405 050 ma/0w CCT 0 000K 5 500K 40 4000K 50 5000K For other CCT please consult factory IDA Approved Power Cord Length 8, 0,, 4, 6, 8, XX, 8 0 4 6 8 XX For mounting use the pole height For A or mounting use the pole height + Finish WH White BK Black BZ Bronze SV Silver SP Specify Premium Color Voltage 0 08 40 77 47 * 480 * * Equipped with step-down transformer Options DS 9 No Uplight Finish HS House Shield (80 ) Motion Sensor w/ Optional Photocell (Meets Title 4 Requirements) See Pole Spec Sheet for Order Code FS 4 Single Fusing PCT Photocell Tenon See p. 7 for details DM 7,8 Dimming (0-0V) DMY 5 Dimming (Dynadim) See p. 7 for details HLxx 6,7,8 Hi-Lo Switching See p. 6 for details 4 Not available with 47 or 480 5 LG4700 only 6 0, 40, 77 only 7 LG4700, LG405 only 8 HL or DM 9 IDA Approved with 000K CCT Product Modifications Please list modification requirements for review by factory: Approvals 5YEAR LED WARRANTY IP65 Date: Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page of (Rev. /07)
SACL--XX-DS 8 /8 (70mm) 5 (66mm) 6 8 7 5 7 (79mm) (78mm) For further details, please see installation instructions. Specifications. Luminaire Cover - Die cast aluminum cover made from low copper alloy, designed to ensure optimal thermal management for extra long life time of LED light engine.. Gasketing - (not shown) Continuous gasket provides weatherproofing, dust and insect control at all fixture connections.. Luminaire Hood - Aluminum shade with white painted interior. 4. LED Array - (not shown) High flux LEDs mounted to PC boards and attached to aluminum heat sink for maximum LED performance and life. CCT tolerance /4 step binning for 000K, 500K and 4000K and ANSI standard for 5000K. CRI minimum 80 for 000K, 500K and 4000K and typical 80 for 5000K. Complete light engine can be removed easily for future upgrade. LED light engine provides a reported lumen maintenance of 9% at 60,000 hours. L70 calculated greater than 7,000 hours. 5. LED Driver - LEDs are driven by RoHS compliant high-efficiency driver. Excellent for cold temperature starting and instant on. Standard driver for DMY option is Philips Xitanium Driver. 6. Hood Supports - Two aluminum arms support shade and optic assembly and attach to the die cast aluminum pole fitter (shown painted matte black for DS option). 7. Pole Fitter - Self-leveling, die-cast low-copper aluminum alloy, fitter base secured to pole with three, stainless steel, Allen head set screws. Fitter for / (90mm) O.D. poles. 8. Driver cover - Die cast aluminum cover made from low copper alloy, removes for tool-less access to driver. Driver secured to removable tray for ease of maintenance (shown painted matte black for DS option). 9. Surge Protector - (not shown) Designed to protect luminaire from electrical surge (0kA). 0. Hi-Lo Switching Option - (not shown) Please see p. 5 for details.. Power Cord - (not shown) Pre-installed at factory. Please specify power cord length in accordance to height of the pole. Add feet to power cord length if double mounting () is specified. Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultraviolet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI. Standard exterior colors are White (WH), Black (BK), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the Saturn Cutoff LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED array when installed and operated according to Selux instructions. For details, see Selux Terms and Condition of Sale. Listings and Ratings: Luminaire and LED tested to IP65 and IESNA LM-79-08 standards. LED tested to LM-80 standards. Luminaire and LED tested at 5 C ambient temperature. For LG4500 and LG4700, luminaire suitable for ambient temperatures of 55 C (0 F). For LG405, luminaire suitable for ambient temperature of 45 C ( F). Minimum operating temperature of luminaire at -5 C (- F). NRTL Listed (i.e. UL, CSA) Visit selux.us for our LED End of Life recycling policy. Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page of (Rev. /07)
Motion Sensor Features The Selux outdoor rated sensor incorporates Passive Infrared (PIR) technology for motion sensing and also includes a built in photocell. Designed to mount directly through a / KO in a single gang faceplate on pole/column, the SBO utilizes 00% Digital Passive Infrared (PIR) technology that is tuned for walking size while preventing false tripping from the environment. Series MS Motion Sensor Optics 70 coverage - Single Sensor Hand Hole Orientation 00 Program D0 (0V=0%) Color WH White Photocell Feature Y Yes Voltage UNV 09 D (V=0%) BK Black N No REVISIONS 47 REV. ECN DESCRIPTION DATE BY APPR BY 8 D (V=0%) 480 0 XXXX BZ Bronze CREATED FOR MARKETING 09//06 FAH DRW 7 D5 (5V=50%) TO DETAIL MODIFICATION TO A 007.7 POLES AND COLUMNS FOR SENSOR MOUNTING ORIENTATION 07//07 FAH DRW LOGIC.000 5.40.500.70 " 05.00 (05mm) 4 X Ă.6.45 THRU 8- UNC THRU General Pole Drawing For Example Only.000 76.0.65 4.8.750 44.45 Nominal NOMINAL Pole POLE HEIGHT Height MINUS.50 " 8.55.500 88.90 X Ă.88 4.76 THRU.000 5.40.000 50.80 DETAIL A SCALE : Sensor Angular SENSOR Orientation ANGULAR ORIENTATION from hand FROM hole HAND 0 HOLE in 90 0Ø increments clockwise IN 90Ø around INCREMENTS pole CLOCKWISE (Type 00, AROUND 09, 8, POLE 7) (TYPE 00, 09,8, 7) 90 Ø (09) ANGULAR ORIENTATION FROM HAND HOLE 0Ā NTS CLOCKWISE AROUND POLE (TYPE 00,09,8,7) TYPE 09 (90Ā) Hand Hole Location HAND HOLD 0 (00) LOCATION 0 Ø (00) 80 Ø (8) TYPE 8 (80Ā) 70 Ø (7) Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us alter the function TYPE 7 of (70Ā) the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions. TOP VIEW Page of (Rev. /07)
Motion Sensor Features 00% Digital PIR Detection, excellent RF Immunity 70 coverage pattern Up to 0ft mounting IP66 Rated for outdoor applications Built-in kv surge protection No minimum load requirements Made for LED light source Interchangeable hot and load wires - impossible to wire backwards Adjustable time delays, max/min dim levels and ramp rates Programming button accessible without opening sensor or removing gaskets No field calibration or sensitivity adjustments required Non-volatile setting memory Convenient test mode Suitable for Title 4 applications General Pole Drawing For Example Only Motion Sensor Wiring BLK WHT BLK VIO GRY SBO SENSOR BLK WHT GRN BLK WHT GRN RED ORG FIXTURE FEED CORD BLK WHT GRN RED ORG WEATHERPROOF WIRE CONNECTOR, 600V 8-8GA (SUPPLIED) LINE CORD ATTACH CORD TO BACK OF SENSOR MOUNTING PLATE WITH ZIP TIES (NOT SUPPLIED) Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 4 of (Rev. /07)
Mounting Single () Die-cast aluminum fitter base secured to pole with three stainless steel, Allen head set screws. Single Arm Mount (A) Die-cast aluminum single luminaire mounting arm secured to pole with four stainless steel, Allen head set screws. Outer slip fitter for / O.D. tenon. Double () Die-cast aluminum double luminaire mounting arm secured to pole with four stainless steel, Allen head set screws. Outer slip fitter for / O.D. tenon. Wall (W) Die-cast aluminum double round wall mount arm. Secured to wall with /4 diameter threaded fasteners (by others). EPA =.ft (0.m ) Weight = 9lbs. (7.7kg) EPA =.ft (0.m ) Weight = 5lbs. (4.0kg) EPA = 4.ft (0.9m ) Weight = 76lbs. (79.8kg) EPA =.ft (0.0m ) Weight = 50lbs. (.7kg) 8 /8 (70mm) 6 (95mm) 7 (80mm) 6 (95mm) 5 (65mm) (8mm) 7/8 (555mm) 4 /4 (0mm) 7/8 (555mm) Pole Height ( shown) Wall Arm Mounting Detail (Conduit and mounting hardware by others). / (90mm) 4 5/6 (mm) 5 5/6 (5mm) 9 /4 (5mm) 9/6 (65mm) Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 5 of (Rev. /07)
Pole Information Refer to pole specification sheets for construction details, anchorage information and additional options. A5 & S5 Round Straight Aluminum & Round Straight Steel Poles S65 Round Stepped Steel Poles Base Cover Information Refer to pole specification sheets for construction details, anchorage information and additional options. Standard Base Cover (BC5) Supplied with A5 and S5 Two-piece cast aluminum Standard Base Cover (BC6) Supplied with S65 One-piece cast aluminum / (89mm) 65/8 (68mm) Pole Height (8 shown) Ø 7/6 (6mm) 5 /4 (4mm) Ø5/4 (400mm) 45/8 (8mm) Optional Base Cover (BC) For A5 and S5 only One-piece cast aluminum / (89mm) 4 (60mm) 4 (60mm) 44 (8mm) 5/8 (550mm) Shown with standard base covers. Ø 5/8 (0mm) Pole Data Chart Pole Series Bolt Circle EPA Information 70mph 80mph 90mph 00mph 0mph S65 / Diameter Stepped Steel Pole Ø9 57.6 44. 4.6 7.5.8 A5 / Diameter Straight Aluminum Pole Ø7 /4 6.. 9.4 7. 5.9 S5 / Diameter Straight Steel Pole Ø7 /4 4.8. 8.6 6.7 5.4 S65 / Diameter Stepped Steel Pole Ø9 45.6 5.0 7..6 7.8 A5 / Diameter Straight Aluminum Pole Ø7 /4.4 9. 7. 5.4 4. S5 / Diameter Straight Steel Pole Ø7 /4.4 8.6 6.5 4.9.9 S65 / Diameter Stepped Steel Pole Ø9 7.6 8.7. 7.5 4.4 A5 / Diameter Straight Aluminum Pole Ø7 /4 9.9 7. 5.4 4.0. S5 / Diameter Straight Steel Pole Ø7 /4 9. 6.7 4.9.6.8 S65 / Diameter Stepped Steel Pole Ø9.7 4. 8.6 4.6.9 A5 / Diameter Straight Aluminum Pole Ø7 /4 8.0 5.8 4..0. S5 / Diameter Straight Steel Pole Ø7 /4 7. 5..8.7.9 S65 / Diameter Stepped Steel Pole Ø9.7 5.8. 9.6 7.6 A5 / Diameter Straight Aluminum Pole Ø7 /4 4.9...4 N/A S5 / Diameter Straight Steel Pole Ø7 /4 4.4.8.9 N/A N/A Height Finish Options 8 8ft. 0 0 ft. ft. 4 4 ft. 6 6 ft. WH White BK Black BZ SV SP Bronze Silver Specify Premium Color BC REC Decorative Cast Aluminum Base Cover (for A5 & S5 poles only) GFCI Receptacle with weatherproof cover (0V only) REC GFCI Receptacle with weatherproof lockable cover (0V only) MS Motion Sensor w/ Optional Photocell (Meets Title 4 Requirements) Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 6 of (Rev. /07)
Bolt Circle for A5 & S5 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown Anchor Bolt Detail for A5 & S5 A5/S5 POLE ONLY 07 /4 (97mm) Bolt Circle /4 x 7 Galvanized Anchor Bolts /4-0 Galvanized Heavy Hex Nut 7 /4 (97mm) 0 (76mm) Conduit Opening /4 (8mm) /4 (9mm) ID Galvanized Flat Washers Hand Hold Location Note: Adequate drainage must be provided in concrete foundation. / (mm) for leveling /4-0 Galvanized Heavy Hex Leveling Nut Concrete footing designed and supplied by others Bolt Circle for S65 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown. Anchor Bolt Detail for S65 Base Cover /4 x 7 Galvanized Anchor Bolts /4-0 Galvanized Heavy Hex Nut 8 / (6mm) S65 POLE ONLY 09 (9mm) Bolt Circle /4 (70mm) /4 (9mm) ID Galvanized Flat Washers 06 /8 (6mm) Conduit Opening Hand Hold Location Note: Adequate drainage must be provided in concrete foundation. /4 (6mm) for leveling /4-0 Galvanized Heavy Hex Leveling Nut Concrete footing designed and supplied by others Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 7 of (Rev. /07)
Wiring Standard Single Wiring & Dynadim (DMY) Hi-Lo Switching Option (HL) Wiring LG4700 and LG405, 0V, 40V, 77V. When red is energized, light output will be at Lo level. Specify low level by using one of the levels listed below (i.e. HL70, HL50 and HL). For other combinations, consult factory. Standard HL levels LG405 LG4700 HL70 = low output 70% X X HL50 = low output 50% X X HL = low output % X X SURGE PROTECTOR L BLACK SURGE PROTECTOR FROM LINE CORD N WHITE GREEN LIGHT ENGINE FROM LINE CORD L N BLACK WHITE GREEN LIGHT ENGINE L RED RELAY 0-0V Dimming Option (DM) Wiring LG4700 and LG405, 0-77V. (47V and 480V available with step-down transformer.) 47/480 V SURGE PROTECTOR SURGE PROTECTOR AUTO TRANSFORMER L BLACK L BLACK FROM LINE CORD N WHITE GREEN LIGHT ENGINE FROM LINE CORD N WHITE GREEN LIGHT ENGINE Dim (+) RED Dim (-) ORANGE Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 8 of (Rev. /07)
Optional Accessories Photo Cell Tenon (PCT) - Button type photocell mounted in cast aluminum pole top tenon. Tenon has integral cast visor to prevent false start/stop cycle and can be oriented for optimum performance. Refer to luminaire spec sheet to determine if this option is applicable. GFCI Receptacle (REC) - 0V 5A GFCI duplex receptacle with cast base bolted to pole and gasketed, provided with weather-proof, self-closing cover; located 6 (95mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (0V only). /4 ¾ [70mm] (70mm) 5/8 5/8" (5mm) 8 5/8 (9mm) 4 / 4 ½" [4mm] (4mm) 5 5/8 (97mm) 9/6 (4mm) Cover shown in the closed position Pole (Generic POLE (G View) Single Fusing (FS) - Single inline fuse holder, shipped separately for infield installation behind hand hole (by others). Available up to 77V. No Uplight Finish (DS) - In order to achieve BUG U0 rating, the hood support and the driver cover are painted matte black to avoid uplight. Dynadim (DMY) - Please refer to the Dynadim Option Form (includes a link to the Philips Design-In Guide) on the Selux Saturn Cutoff LED webpage under Additional Downloads. GFCI Receptacle (REC) - 0V 5A GFCI duplex receptacle with cast base bolted to pole and gasketed, provided with weather-proof, self-closing, lockable cover; located 6 (95mm) from base of pole, inline with handhole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (0V only). 9/6 9/6" (9mm) 6 /6 6 /6" (70mm) /4 (58mm) Cover shown in the closed position Pole POL (Generic View) Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 9 of (Rev. /07)
Optional Accessories House Shield Front View View 6 (5mm) 6 (5mm) Street House Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page 0 of (Rev. /07)
Photometry Conversion Chart Values based on 6 (4.9 m) mounting height Mounting Height 0 (.0 m) (.7 m) 4 (4. m) 6 (4.9 m) 8 (5.5 m) Multiply.7.6.07.00 0.84 LED CCT Prorate Table Values based on Flux Binning CCT 000K 500K 4000K 5000K Theoretical Multiplier.00 0.96.07.5 LED Information Standard Power Electrical Specification (Type V Shown) Color Temerature 5000K 4000K 500K 000K Drive Current 050 700 500 050 700 500 050 700 500 050 700 500 Performance Delivered Lumens (lm) 805 5805 48 775 5589 45 6946 5007 74 7 507 87 Wattage (W) 0 68 50 0 68 50 0 68 50 0 68 50 Efficacy (lm/w) 79 85 86 76 8 84 68 7 74 7 76 78 R Optics / 0W LED / 5000K CCT 5587 Catalog #: SACL-R-X-LG405-50-0 Delivered Lumens: 76 Input Watts: 0.5W Efficacy: 69 lm/w CRI: >8 Maximum candela of 5587 at 6.5 from vertical. IES classification - Type I Full-Cutoff Mounting Height = 6 (4.9 m) B-U0-G Power Factor: 0.998 Total Harmonic Distortion:.84% 490 794 97 0.75.75..5. House Street Link to photometry (PDF) Link to photometry (IES) 4 5 0.5.75 45 67 Maximum Candela = 5587.6 Located At Horizontal Angle = 6.5, Vertical Angle = 5 # - Vertical Plane Through Horizontal Angles (6.5-4.5) (Through Max. Cd.) Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Heigh t R Optics / 0W LED / 5000K CCT 4799 Catalog #: SACL-R-X-LG405-50-0 Delivered Lumens: 74 Input Watts: 0W Efficacy: 7 lm/w CRI: >8 Maximum candela of 4799 at 47.5 from vertical. IES classification - Type II Full-Cutoff. Mounting Height = 6 (4.9 m) B-U0-G Power Factor: 0.998 Total Harmonic Distortion:.84% 600 400 00 0.75.75..5. House Street Link to photometry (PDF) Link to photometry (IES) 4 Maximum Candela = 4799.47 Located At Horizontal Angle = 45, Vertical Angle = 47.5 # - Vertical Plane Through Horizontal Angles (45-5) (Through Max. Cd.) 5 0.5.75 45 67 Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Heigh t Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page of (Rev. /07)
Photometry R Optics / 65W LED / 5000K CCT Catalog #:SACL-R-X-LG405-50-0 Delivered Lumens: 7599 Input Watts: 0W Efficacy: 74 lm/w CRI: >8 Maximum candela of 709 at 60 from vertical. IES classification - Type III Full-Cutoff. Mounting Height = 6 (4.9 m) B-U0-G Power Factor: 0.998 Total Harmonic Distortion:.84% 70 78 855 97 0.75.75...5 House Street Link to photometry (PDF) Link to photometry (IES) 4 Maximum Candela = 709.50 Located At Horizontal Angle = 60, Vertical Angle = 60 # - Vertical Plane Through Horizontal Angles (60-40) (Through Max. Cd.) 5 0.5.75 45 67 Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Heigh t R5 Optics / 65W LED / 5000K CCT Catalog #: SACL-R5-X-LG405-50-0 Delivered Lumens: 0 Input Watts: 67W Efficacy: 79 lm/w CRI: >8 Maximum candela of 004 at 60 from vertical. IES classification - Type V Mounting Height = 6 (4.9 m) B-U0-G Power Factor: 0.998 Total Harmonic Distortion:.84% 004 5 50 75 ISOFOOTCANDLE LINES OF HORIZONTAL ILLUMINANCE..5 0..75.75 House Street Link to photometry (PDF) Link to photometry (IES) 4 Maximum Candela = 004.444 Located At Horizontal Angle = 5, Vertical Angle = 60 # - Vertical Plane Through Horizontal Angles (5-5) (Through Max. Cd.) 5 0.5.75 45 67 Distance In Units Of Mounting Height Values Based On 6 Foot Mounting Heigh t Selux Corporation 07, T 845-84-400, 800-75-897, F 845-84-40, www.selux.us Page of (Rev. /07)