PLED LED CONVERSION KITS
|
|
- Lizbeth Brooks
- 5 years ago
- Views:
Transcription
1 The King Luminaire LED Conversion Kits offer a simple way to convert to high efficiency LED. With tested optical control and dynamic thermal management, King Luminaire s P4 Flat Array LED Conversion kit is a complete tested system that requires little maintenance and provides high-performance light quality. Features - Complete system that includes a new shallow prismatic lens, LED light engine and driver assembly - P4 Flat Array (P4) optical system - CCT of 3000 & 4000K (+/- 300K), minimum 70 CRI - Type III and V IESNA distribution patterns - Certified to UL standards and UL wet listed - 7 year warranty Benefits - Easy installation of a complete, fully tested system - Absolute photometry and accurate lighting layouts - Long operational life with King Luminaire s Dynamic Thermal Management - Higher light quality and control than retrofits - High efficacy and cost effective - Energy savings with reduced maintenance Optical Systems PLED ENGINE The P4 optical system can cut energy consumption by more than 50% while still maintaining performance and an attractive nightscape appearance. LIGHTING THE WAY
2 CONVERSION KITS VS RETROFITS The number of market-ready LED products grows daily. Some perform very well and provide more than 50% energy savings, but the quality and energy efficiency vary widely. It is important to ensure you choose an LED system that meets industry standards. King Luminaire is committed to continue the tradition of producing high performance and quality light systems that was started over 60 years ago. KING LUMINAIRE S CONVERSION KITS Fully tested and certified as a whole system that includes globe, LED light engine and driver assembly. Certification for outdoor lighting through CSA (UL) and IES. LED RETROFITS Retrofit tested on its own as a component, not as a whole system. Not always tested with CSA (UL) and IES. WHY IT S IMPORTANT It is important to test a system as a whole in order to accurately report on photometrics, lumen output and thermals. Certification through CSA (UL) and IES is very important, since it means the system has all the above information available and it meets the industry standard. Absolute photometry and accurate lighting layouts provided. Fixture efficacy and delivered lumens reported as a whole system. Lumen depreciation data, such as L70 as per TM-21, is provided for our system as a whole. Cannot provide absolute photometry or accurate lighting layouts. Retrofits report the efficacy and delivered lumens as a component. Retrofits do not report thermal information as a whole system only as a component. Light levels required may not be met with retrofits which may cause safety issues and require additional lights to be installed. In order to accurately determine how an LED system will perform as a whole, the LED engine must be tested and installed in the intended fixture. In order to accurately calculate the lumen depreciation, and thereby the useful operating life of the fixture, it must be thermally tested as a whole system, not as a stand-alone component. Incorporates dynamic thermal management for venting and sinking all our LED products. Retrofits may have sinks, but typically fail to offer proper heat venting with airflow over heat sinks within the fixture. If LED systems do not have proper venting and sinking there is risk of premature failure. Think of proper heat management as an insurance policy to protect your investment. King conversion systems are easy to install with just 6 simple steps. IP66 certified as a whole system which means the optical chamber is sealed, so moisture, dirt, bugs or any other small objects will not be able to penetrate. Standard 7 year warranty on our LED systems with Gold Standard customer service to provide support on our products long into the future. Retrofits can be quite complicated to install which can result in increased labor costs. The retrofit as a component may be IP66 certified, but the system as a whole is not. This means dirt, bugs or other small objects may get into the optical chamber. Retrofit companies will warranty the component, but not the system as a whole. Due to the increased difficulty to install a retrofit, it can take much more time and may result in an installation error which could result in reduced system performance or premature failure. If foreign materials enter the optical chamber it can cause greatly reduced lumen output. Dirt build-up can cause an increase in heat which will reduce performance or create failure. Moisture can be very adverse and also cause failure. It is important to warranty the full system with a company who has been in the business of manufacturing outdoor lighting for over 20 years. LIGHTING THE WAY
3 PRODUCT SPECIFICATIONS LED ENGINE Light engine shall include an array of 30 solid state Cree X- Series high power LEDs (light emitting diodes). The emitters shall be mounted to a metal core circuit board using SMT technology. The LEDs and circuit boards shall then be mounted to a high performance heat sink. OPTICS External light control shall consist of high precision refractive lenses mounted above the LED emitter arrays in such a way to achieve optimum uplight control. The lenses shall also control horizontal light distribution so that Type III or V IESNA distribution patterns are achieved. LENS The conversion kit is available with or without a lens. Refractive lens options include shallow glass (borosilicate), acrylic or polycarbonate. Non-refractive lens options include sag or shallow glass (clear borosilicate). The lens is secured by means of a cast A319 aluminum globe ring that is sealed with a continuous circular gasket. PHOTOMETRICS Fixtures are tested to IESNA LM79 specifications. These reports are available upon request. CHROMATICITY High output LEDs come standard at 3000K & 4000K (+/- 300K) with a minimum nominal 70 CRI. Additional CCT emitters are available upon request. LUMEN MAINTENANCE Reported (TM21) and Calculated (L70) reports are available upon request with a minimum calculated value of 100,000 hrs. WIRING All internal wiring and connections shall be completed so that it will be necessary only to attach the incoming supply connectors to Mate-N-Lok connectors or to a terminal block. Mate-N-Lok shall be certified for 600V operation. Internal wire connectors shall be crimp connector only and rated at 1000V and 150 C. All wiring to be CSA certified and/or UL listed, type SFF-2, SEWF-2, or SEW-2 No. 14 gauge, 150 C, 600V, and color coded for the required voltage. MISCELLANEOUS All exterior hardware and fasteners, wholly or partly exposed, shall be stainless steel alloy. All internal fasteners are stainless steel or zinc coated steel. All remaining internal hardware is stainless steel, aluminum alloy, or zinc coated steel. WARRANTY The LED luminaire comes with a 7 year limited warranty. CERTIFICATION: CSA US Listed Suitable for wet locations ISO 9001 IP66 ARRA Compliant LM79 / LM80 Compliant DRIVER INFO: >0.9 Power Factor <20% Total Harmonic Distortion V & V -40 C Min. Case Temperature 70 C Max. Case Temperature Surge Protection: ANSI C136.2 extreme level 20kV/10kA DRIVER The LED universal dimmable driver will be class 2 and capable of V or V input voltage, greater than 0.9 power factor, less than 20% total harmonic distortion. The case temperature of the driver can range from -40 C to 70 C. Each LED system comes with a standard surge protection designed to withstand up to 20kV/10kA of transient line surge as per IEEE C C High. An in-line ferrite choke is utilized to provide protection against EFT s. The driver assembly will be mounted on a heavy duty fabricated aluminum bracket to allow complete toolless maintenance. THERMALS Fixtures tested to DOE sanctioned standards to determine the maximum in-situ solder-point or junction-point temperatures of the LED emitters. This report is available upon request. FINISH Housing is finished with a 13 step KingCoat SuperDurable polyester TGIC powder coat. Standard colors include strobe white, brown metal, marina blue, gate gray, Chicago bronze, standard gold, standard black, federal green and rain forest. Please see our website for a complete list of colors. RAL and custom color matches are available.
4 POWER & LUMENS LED CONVERSION KIT PLED ENGINE Test Voltage: 120V Nominal Color Temperature: 3000K & 4000K Engine Series: 30 Emitters (40-100W Max) LED Engine + Driver Rated Life = 100,000 hrs 2 To learn more about the P4 Optic, please see the P4 Pendant Optic Information Sheet Photometric Test Report Number Optical Option Color Temperature IES Distribution Nominal Watts Engine Series Delivered Lumens 3 Efficacy (LM/W) 3 emitter Driver Output Current BUG Rating HID Equivalent 4 In Testing P4GS 4000 Type III N/A N/A N/A In Testing P4GS 4000 Type V N/A N/A N/A Shallow Lens 0200SP4GS3X06040XXD P4GS 4000 Type III In Testing P4GS 4000 Type V N/A N/A N/A SP4GS3X07540XXD P4GS 4000 Type III In Testing P4GS 4000 Type V N/A N/A N/A SP4GS3X10040XXA P4GS 4000 Type III In Testing P4GS 4000 Type V N/A N/A N/A Lens: Glass Shallow Refractive 1 Color temperature is nominal, please see test report for specific chromaticity information 2 Contact factory for TM21 information 3 Due to the continuous advancements in LED technology, luminaire delivered lumen and efficacy is subject to change without notice at the discretion of King Luminaire 4 Equivalence should always be confirmed by performing a photometric layout, due to the variability of performance requirements and application criteria HOW TO ORDER SERIES LUMINAIRE STYLE KCK201, KCK202, KCK203, KCK204, KCK205, KCK206, KCK207, KCK208, KCK209, KCK210, KCK211, KCK212, KCK215, KCK282 IES LIGHTING CLASSIFICATION III - Type 3 V - Type (30 emitters) SOURCE SSL - Solid State CCT 3K K 4K K PAINT COLOR GN - Federal Green BE - Blue GY - Gray BN - Brown BK - Black BZ - Bronze *Additional options available on website (SSL) OPTICAL OPTIONS P4FL - P4 Flat (No Lens) P4GS - P4 Glass Shallow Refractive Lens P4AS - P4 Acrylic Shallow Refractive Lens P4PS - P4 Polycarbonate Shallow Refractive Lens P4SA - P4 Glass Sag Non-Refractive Lens P4SH - P4 Glass Shallow Non-Refractive Lens WATTAGE LINE VOLTAGE 40, 60, 75, V ( V) 480V ( V)* *Select wattages available within this range, contact King Luminaire KING LUMINAIRE 1153 State Route 46N Jefferson, OH Phone:
5 CONVERSION DIRECTIONS LED CONVERSION KIT STEP 1 STEP 2 STEP 3 STEP 4 Select HID fixture for conversion to LED Unlatch and remove lens and gasket from shroud Rotate ballast plate clockwise and remove Connect LED driver assembly STEP 5 STEP 6 STEP 7 STEP 8 Rotate driver assembly counter clockwise to lock in place Place lens on hinge and apply new gasket to shroud Connect driver to LED engine Latch lens into place A Member of The StressCrete Group of Companies KING LUMINAIRE 1153 State Route 46N Jefferson, OH Phone:
LED CONVERSION KITS. Optical Systems KCK124 PARAGON LIGHTING THE WAY
CONVERSION KITS KCK124 PARAGON The King Luminaire KCK124 Paragon Conversion Kit offers a simple way to convert to high efficiency. With tested optical control and dynamic thermal management, King Luminaire
More informationLED CONVERSION KITS. Optical Systems KCK118 WASHINGTON LIGHTING THE WAY
CONVERSION KITS KCK118 WASHINGTON The King Luminaire KCK118 Washington Conversion Kit offers a simple way to convert to high efficiency. With tested optical control and dynamic thermal management, King
More informationCONVECT RADIATE CONDUCT
The King Luminaire KCK445R Sol-Lux LED Conversion Kit offers a simple way to convert to high efficiency LED. Through Tri-Thermal Management, the KCK445R Sol-Lux reduces heat via convection, radiation and
More informationK601D COACH LANTERN - LED PRODUCT SPECIFICATIONS
The K601D is a cost effective coach lantern with a historical appearance that offers high performance Advanced LED Technology with our signature P4 optical system. It has excellent spacing and low glare
More informationK199 CALIFORNIA - LED ACORN PRODUCT SPECIFICATIONS 39 1/8"
The K99 California luminaire was one of the original acorn styles that graced the streets of North American towns and cities, particularly in Southern California. Teamed with King Luminaire s high performance
More informationAugusta POST-TOP. IP66 EPA: 2.2 FT 2 Weight: 48 lbs - 22 kg
Augusta Augusta POST-TOP The AUGUSTA Series, with its traditional styling, is the perfect companion for open areas such as park pathways or streets. Its elegant design provides all the charm needed to
More informationAugusta POST-TOP. IP66 EPA: 2.2 FT 2 Weight: 48 lbs - 22 kg
Augusta Augusta POST-TOP The AUGUSTA Series, with its traditional styling, is the perfect companion for open areas such as park pathways or streets. Its elegant design provides all the charm needed to
More informationMeridian DETAILS CA10T4A CA10T4D CA13T4A. IP66 EPA: 2.2 FT 2 Weight: 27 lbs - 12 kg
Meridian Meridian DETAILS The elegant modular design of the MERIDIAN series allows adaptability to all surroundings and perfect integration with many different environments. Composed of cast and extruded
More informationDriver Info. Construction Thermal Management: Superior thermal management with die-cast aluminum heatsink. Ambient Temperature:
WP3LED55 Project: Type: Prepared By: Date: 82W, 65W and 55W LED wallpacks. Available with up to 9,000 lumens and 121 LPW. Up to 100,000 hour L70 lifespan. 5-Year Warranty. Color: Bronze Weight: 16.8 lbs
More informationCN12P1A GCPO REV. 1: 12/16
Marina CN12P1A GCPO Marina PENDANT The MARINA pendant is a mid-century modern classic design that compliment many urban environments. The latest version offers a unique look by retaining the iconic cage
More informationHAZARDOUS LOCATION CLASSIFIED AREAS LW1 AND LW2 SERIES DOWN OR UP OPTICS
H6..H Project: Fixture Type: Location: Contact/Phone: FINIA LED WALL MOUNTED HAZARDOUS LOCATION CLASSIFIED AREAS LW AND LW SERIES DOWN OR UP OPTICS LED W, W, AND 8W PRODUCT DESCRIPTION The Finia LED LW
More informationARIETA 18 Architectural LED Area Luminaire AR18 M2 Series Specification Data Sheet
Project Type Catalog No. Luminaire Data Weight 24 lbs [10.9 kg] EPA 0.55 ft 2 Ordering Information Sample Catalog No. AR18 MV NW 3 DB 700 HSS Product LED Code Voltage Nominal Color Temperature Distribution
More informationLevanto DETAILS. IP67 EPA: 0.96 FT 2 Weight: 35 lbs - 16 kg
Levanto CLE17T4A Levanto DETAILS LEVANTO s sleek arms and slim heat sink highlights its contemporary style. The Utility Fitter and superior thermal management achieves remarkable efficacy. Its refined
More informationProject: Type: Qty: QH2L. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole. Options
Quadro H LED Project: Type: Qty: QHL _ Series Mounting Optics Light Engine CCT Finish Voltage Option _ Pole Series Height Finish Options Series Mounting Optics Light Engine CCT Finish Voltage QHL Quadro
More informationVisor Compact Architectural LED Wallpack. Technical Specifications VISOR TM. Visor Configuration Information. Project Catalog Number Type Date
VISOR TM led wallpack Visor compact architectural LED wallpacks replace up to 250W pulse start metal halide wall-mounted fixtures in perimeter, security, and entrance way applications while consuming up
More informationGreenCobra LED Street Light GCL G-Series Specification Data Sheet
GreenCobra Street Light Project Type Catalog No. Luminaire Data Weight 18 lbs [8.17 kg] EPA 0.8 ft. 2 5.7 in [145 mm] 5 in [127 mm] 5.7 in [145 mm] 15.2 in [386 mm] 15.2 in [386 mm] Ordering Information
More informationPaseo. Luminaire CE21T4UF Pole PA40 base cover BD11
Paseo Luminaire CE21T4UF Pole PA40 base cover BD11 CE21T4B Paseo DETAILS With a flat lens design, the PASEO is ideal for modern design applications with light control in mind. The optional Utility Fitter
More informationMajesta DETAILS CO12P1A CO12P1B IP66 COM12P1A
Majesta Majesta DETAILS Period style combined updated with an industrial look, the MAJESTA is available in two sizes and with various decorative shades and adapts exceptionally in both urban and suburban
More informationARIETA 13 Architectural LED Area Luminaire AR13 M2 Series Specification Data Sheet
Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 8.0 in [203 mm] 8.7 in [220 mm] 8.0 in [203 mm] 8.7 in [220 mm] Ordering Information Sample Catalog No. AR13 MV NW 5 BK 700
More informationPark Avenue DETAILS. IP67 EPA: 1.8 FT 2 Weight: 45 lbs - 20 kg
Park Avenue Park Avenue DETAILS The PARK AVENUE Series, with its mid-century modern styling, is designed to disperse a vast amount of light while maintaining a timless look. The PARK AVENUE is Intended
More informationCampana DETAILS CN55P1A. IP67 EPA: 1.8 FT 2 Weight: 52 lbs - 24 kg CN55P1B
Campana Campana DETAILS Luminaires in the CAMPANA series coexist perfectly with environments such as parks, pedestrian areas, waterfront projects, shopping centres, streets or avenues. This series of luminaires
More informationMorino DETAILS IP67. Contact factory for WIRELESS CONTROLS and further details REV. 5: 06/18. EPA: 1.8 FT 2 Weight: 35 lbs - 16 kg
Morino Morino DETAILS The updated Victorian style Morino, designed with decorative arms that lend itself perfectly to any post classic settings. Conceived with a high efficiency heat sink, integrated Utility
More informationDomia DETAILS CY55P1A CY55T4 IP67
Domia Domia DETAILS The Domia offers smooth curves and a timeless shape blends easily into any environment. With a flat lens design, the DOMIA family enhances any project while offering high performance
More informationGE Evolve LED Roadway Lighting ERL1-ERLH-ERL2
The Evolve LED Roadway Luminaire is optimized for customers requiring a LED solution for local, collector and major roadways. GE s unique reflective optics are designed to optimize application efficiency
More informationARIETA 13 Architectural LED Area Luminaire AR13 N-Series Specification Data Sheet
Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 25.6 in [650 mm] 8.0 in [203 mm] 13.5 in [343 mm] 3.78 in [96 mm] Ordering Information Sample Catalog No. AR13 48N MV NW 5 BK
More informationALG LED Area Light K lm 21000lm 33000lm 100W 150W 300W. Type III Type V
ALG LED Area Light Description Innovative universal mounting Slim design DLC Premium Type III and V standard 10KV surge protection standard Intended Applications Parking lots, walkways, auto dealerships,
More informationHistoria DETAILS CY25P1A CY25T4B (FGC/FGF) IP66 CY25P1A (M222/WPB)
Historia Historia DETAILS CY5PA CY5T4B (FGC/FGF) The HISTORIA series elegantly complements a variety of spaces and architectural projects, from parks, pathways, streets and avenues. Its antique design
More informationLevanto. details CLE17T4A
Augusta Levanto Levanto details 2 LEVANTO s sleek arm design and slim heat sink highlights its contemporary style. The Utility Fitter and superior thermal management achieves remarkable efficacy. Its refined
More informationARIETA 13 Architectural LED Area Luminaire AR13 N-Series Specification Data Sheet
Luminaire Data Weight 15.4 lbs [7 kg] EPA 0.47 ft 2 Project Type Catalog No. 25.6 in [650 mm] 8.0 in [203 mm] 13.5 in [343 mm] 3.78 in [96 mm] Ordering Information Sample Catalog No. AR13 48N MV NW 5 BK
More informationAutobahn Series ATB0 Roadway Lighting
Autobahn Series ATB0 Roadway Lighting PRODUCT OVERVIEW Features: OPTICAL Same Light: Performance is comparable to 70-250W HPS roadway luminaires. White Light: Correlated color temperature - 4000K, 70 CRI
More informationSymphony DETAILS. IP66 EPA: 1.8 FT 2 Weight: 52 lbs - 24 kg
DETAILS The SYMPHONY is a new take on the traditional acorn design and it performs with our Galaxy engine and offers higher wattages and optical performance for the utility market. Available with and without
More informationGE Evolve LED Roadway Lighting ERL1-ERLH-ERL2
GE Evolve ERL-ERLH-ERL GE Evolve ERL-ERLH-ERL The Evolve LED Roadway Luminaire is optimized for customers requiring a LED solution for local, collector and major roadways. GE s unique reflective optics
More informationwww.greenelectricalsupply.com Page 1 of 4 The HLR SERIES hazardous location family of fixtures is suitable for use in a wide range of indoor and outdoor Class I Division 2 applications. Available in eight
More informationAutobahn Series ATBO Roadway Lighting
Autobahn Series ATBO Roadway Lighting P R O D U C T O V E R V I E W Applications: Roadways Off ramps Residential streets Parking lots DIMENSIONS Effective Projected Area (EPA): The EPA for the ATB0 is
More informationMA20/MA21 SERIES MAYA - LED Post Top
TYPE: QUANTITY: PROJECT: / SERIES Post Top CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION 7 1 2 3 4 1- Cast aluminum LED heat sink. 2- Optical system assembly. 3- Set of two
More informationGE Evolve LED Post Top Contemporary Twin Support Post Top (EPTC)
GE Evolve LED Post Top Contemporary Twin Support Post Top (EPTC) GE Evolve LED Post Top Lighting Contemporary Twin Support Post Top (EPTC) The GE Evolve LED Contemporary Twin Support Post Top (EPTC) offers
More informationEverline LED Fixtures & Retrofit Kits
Everline LED Fixtures & Retrofit Kits Making It Easy to Upgrade to LED Technology Upgrading from a traditional lighting system to LED lighting just makes sense (e.g. more energy savings, less spent on
More informationcoop erat ive Flood Lights 50W Flood Light GLC-ASFL-50W-1 PERFORMANCE LED Chip Beam Angle 70 Lumen Maintenance Power Factor EMI ENVIRONMENTAL
GreenLight coop erat ive Product Specifications Flood Lights 0W Flood Light GLC-ASFL-0W-1 Flexible, modular design Multiple choice of optical lenses PERFORMANCE LED Chip CREE XT-E Lumen Output (IES),0
More informationPOP CORE ROUND 24 LED
PROJECT: TYPE: NOTES: Shown with 3. optics Shown with optics DESCRIPTION POP Core features a simple, uniformly luminous diffuser and delivers up to 110. The diffuser and light engine form a fully enclosed
More informationUnderstanding the Complexities of Specifying LED Luminaires. It s no longer a Bulb in a Box It s an LED TV on a Pole
Understanding the Complexities of Specifying LED Luminaires It s no longer a Bulb in a Box It s an LED TV on a Pole Legacy Technology Lamps and Ballasts All components are built and rated individually
More informationScottsdale Vertex - SCV Petroleum Canopy LED Luminaire
Catalog # : Project : Prepared By : Date : Scottsdale Vertex - SCV The Scottsdale Vertex is the most feature-rich canopy fixture in the marketplace. Innovations such as combined optical distributions,
More informationWPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product
More informationBavaria Downs. Chaska, MN. Lighting
Bavaria Downs Chaska, MN Lighting Jason Kinsella City View Electric, Inc. 14309 Lake Drive NE Columbus, MN 55025 Phone 651.659.9496 Fax 651.659.0905 cityviewelectric.com DESCRIPTION Lumark The Prevail
More informationE-Cobra LED Street and Area Light EC M2 Series Specification Data Sheet
Project Type Catalog No. Luminaire Data L Weight EPA EC1 16.1 in [409 mm] 10.8 lb [4.9 kg] 0.40 ft 2 EC3 20.8 in [528 mm] 12.7 lb [5.8 kg] 0.45 ft 2 EC4 23.5 in [597 mm] 14.0 lb [6.3kg] 0.48 ft 2 30.6
More informationMEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
More informationMN/DOT Specification Light Emitting Diode (LED) Luminaire 03/20/2012
1. LISTING REQUIREMENTS MN/DOT Specification Light Emitting Diode (LED) Luminaire 03/20/2012 1.1. The Luminaire shall be listed by a National Recognized Testing Laboratory (NRTL) as defined by the U.S.
More informationLUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT
EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,
More information6DS 6 Downlight Square
CATALOG #: L7 - L13: 5-7/8 L21: 7-3/8 6 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI Beam angles ranging from 25º narrow to 65º wide for tailored
More informationStreetworks CEM/MEM EPIC MEDIUM LED. 1-4 LightBARs
DESCRIPTION The Epic Collection delivers custom luminaire flexibility with high quality, yet availability expectations of standard specification grade product. The Epic Collection can be dressed to suit
More information304 Series TM. Parking Structure Luminaire Mounting 0. Product Description. Performance Summary. Ordering Information Example: 30XAC004E43WH
34 Series TM Parking Structure Luminaire Mounting Product Description Cree 34 Series is a highly versatile fixture which adapts to a wide range of applications: from gas station forecourt canopies, to
More information4DS 4.5 Downlight Square
CATALOG #: - : 5 : 6-1/2 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI 4 inch aperture is unobtrusive in small scale spaces Square
More informationScottsdale Vertex - SCV Petroleum Canopy LED Luminaire
Catalog # : Project : Prepared By : Date : Scottsdale Vertex - SCV The Scottsdale Vertex is the most feature-rich canopy fixture in the marketplace. Innovations such as combined optical distributions,
More informationSaturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
More informationWASHDOWN SERIES 2 LED MODULES v 1.0 FIXTURE SPECIFICATION SHEET TYPE
WASHDOWN SERIES 2 LED MODULES v 1.0 FIXTURE SPECIFICATION SHEET TYPE WASHDOWN 2M ABOUT THE LUSIO WASHDOWN SERIES The Lusio Commercial and Industrial Washdown Series features LED high bay fixtures for use
More information304 Series LED Recessed Canopy Luminaire
304 Series LED Recessed Canopy Luminaire Product Description Luminaire housing is constructed from rugged die cast aluminum components (RS Mount) or die cast and extruded aluminum components (RD Mount).
More informationLuminaire characteristics: Source: Lumen maintenance: Optics: Material: Mounting: Electrical: Dimming: Finish: Weight: Warranty: Ratings:
Page: 1 of 6 Collection of pendants luminaire for commercial and institutional applications. Canopy mounted, with complete range of optical accessories, Studio is a flexible solution for general lighting
More informationProject: Type: Qty: SA1L. Optics Mounting Light Engine CCT Finish Voltage Options. Series SA1L-XX-1-NH SA1L-XX /2" O.D.
Saturn LED Project: Type: Qty: SAL Series Optics Mounting Light Engine CCT Finish Voltage Pole Series Height Finish Pole Options Option Series SAL Saturn LED Optics Mounting Light Engine CCT Finish Voltage
More informationXSP Series - IP66. XSP2 TM LED Street /Area Light Double Module - Version B. Product Description. Performance Summary. Accessories
XSP Series - IP66 XSP2 TM LED Street /Area Light Double Module - Version B Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers
More informationLimited Warranty : 10 years on luminaire / 10 years on Colorfast DeltaGuard finish 6.1" (155mm) Color Options. Drive Current
CAN-304-PS-RD 304 Series Canopy Luminaire Petroleum Symmetric Recessed Mount for Double Skin Canopies Product Description Slim, low profile design. Luminaire is constructed from rugged die-cast and extruded
More informationDenali Fairbanks Yukon
Denali Fairbanks Yukon LED Multi-Purpose Surface Mount Pendant Luminaire ARRA Compliant We reserve the right to revise the design or components of any product without notice. CATALOG # PROJECT/LOCATION
More informationLuminaire PROFILE-SPOKE Ind. Up Dn Control (PS3-B) Type. Project. Notes. Performance Summary OPTIONS 4S D 76 W 3S D 57 W
T F W 604.549.9379 604.549.9555 fluxwerx.com PROFILE - SPOKE Specification Data Luminaire PROFILE-SPOKE Ind. Up Dn Control () Type Project Profile Spoke 3 (S3) Product Notes Profile Spoke 4 (S4) Performance
More informationXSP High Output Series XSP2 High Output LED Street/Area Luminaire Double Module
XSP High Output Series XSP High Output LED Street/Area Luminaire Double Module Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP High Output
More information4DS 4.5 Downlight Square
CATALOG #: 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Tunable white from 2700K to 5000K CCT, minimum 80 CRI 4 inch aperture is unobtrusive in small scale spaces Square shape accentuates
More informationTHE HIGH STRIP FIXTURE SERIES PERFORMANCE KEY FEATURES INCLUDE:
THE HIGH PERFORMANCE LED Fixture Series (surfacemount or hung) for Passageway, Stairwells, General, Direct and Indirect Illumination KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep
More informationLED DockLight. Sustainable lighting with powerful output. UL listed for wet locations. Standard 5 year warranty
Patent # USD0587833 Sustainable lighting with powerful output Industrial luminaire with 15 watt power consumption Rated life of 50,000 hrs to 70% lumen maintenance Highly impact resistant; LED technology
More informationKIT-XSP-AP60-34-G0 Fitter kit to mount to 34mm tenon 303mm XSP B 02 2LG A 30K + 24 SV DIM 01. Insulation Class CCT. Voltage
XSP Series - IP66 XSP1 TM LED Street /Area Light Single Module - Version B Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers
More information304 Series LED Parking Structure Luminaire
304 Series LED Parking Structure Luminaire Product Description Slim, low profile design. Luminaire is constructed from rugged die cast and extruded aluminum components. LED driver is mounted in a sealed
More informationVINCI-LED Wall/Area/Flood Lighting
Job Information Type: VINCI-LED Catalog #: Project: Comments: Prepared by: YEAR WARRANTY WARRANTY TEN INCLUDES LABOR ALLOWANCE Vinci Vinci Large 7⅞ ¼ ⅝ 9¾ ½ ⅛ Applications Wall/Surface Post/Bollard Low
More informationMnDOT Specification Light Emitting Diode (LED) Luminaire For Roadway Lighting Asymmetrical High Mast 04/19/18
1. LISTING REQUIREMENTS MnDOT Specification Light Emitting Diode (LED) Luminaire For Roadway Lighting Asymmetrical High Mast 04/19/18 1.1. The luminaire shall be listed by a National Recognized Testing
More informationEvolve LED Roadway Lighting
GE Lighting Evolve LED Roadway Lighting Scalable Specification Grade Cobrahead (ERS, ERS, ERS3 & ERS4) imagination at work Product Features From local to major roadways, the GE Evolve LED Roadway Scalable
More informationLEDway E-Tunnel. Cree Ledway LED Street Light. Product Description. Performance Summary. Accessories. Ordering Information Example: LXDACT02E43GSV
LEDway E-Tunnel Cree Ledway LED Street Light Product Description Luminaire housing is all aluminum construction. All components are mercury free and recyclable. Sharp profile for low wind exposure. Tooless
More informationHeavy industrial LED lighting Champ Pro PFM LED luminaires. Champ PFM. LED floodlights for heavy industrial areas. Authorized Distributor
Heavy industrial LED lighting Champ Pro PFM LED luminaires Champ PFM LED floodlights for heavy industrial areas Authorized Distributor Champ Pro PFM LED floodlights Safe. Reliable. Efficient. Featuring
More informationwww.greenelectricalsupply.com t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. UNIVERSAL LIGHT
More informationCFL-LED-KIT Compact FloodLight, LED 2.0 Upgrade Kit kl_cfl_ledkit_spec.pdf
JOB NOTES TYPE APPROVALS FEATURES Second generation LED 2.0 Three beam patterns, Wide Flood, Vertical Flood, and Narrow Flood distributions generate high efficiencies and outstanding uniformity of illumination
More informationDE Down Light. Quick Facts. LED Down Lights. Straight Shroud
LED Down Lights PROJECT CATALOG # TYPE NOTES Straight Shroud DE Down Light DESIGNER PLUS Practical directional down light in 1, 3, 6, or 9 LED. Aluminum construction. An RGBW version is also available
More informationSTUDIO. Luminaire characteristics: Power input: 12.5W to 49W Lumens: 1300 to 4600lm (for 3000K, 80CRI) Luminaire efficacy: Up to 107lm/W.
Page: 1 of 6 Collection of pendants luminaire for commercial and institutional applications. Canopy mounted, with complete range of optical accessories, Studio is a flexible solution for general lighting
More informationXSP C F 30K + 24 SV Q# 01. Insulation Class CCT 30K 3000K (80 CRI) 35K 3500K 40K 4000K 57K 5700K. + Class 1 ^ Class 2
XSP Series - IP66 XSP2 TM LED Street /Area Light Double Module - Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers
More informationLuminaire PROFILE-SPOKE 15 UP 85 DN LED (PS1-D) Type. Notes. Performance Summary D OPTIONS 3S A 28 W B 34 W C 44 W D 57 W
T F W 604.549.9379 604.549.9555 fluxwerx.com PROFILE - SPOKE Specification Data Luminaire PROFILE-SPOKE 15 UP 85 DN LED () Type Project Profile Spoke 3 (S3) Product Notes Profile Spoke 4 (S4) Performance
More informationOSQ Series OSQ LED Area/Flood Luminaire Large
OSQ Series OSQ LED Area/Flood Luminaire Large Product Description DA Mount The OSQ Area/Flood luminaire blends extreme optical control, advanced thermal management and modern, clean aesthetics. Built to
More informationTRUET5 EXT (DIMMABLE)
t all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TRUET5 EXT (DIMMABLE) www.trulygreensolutions.com
More information4DR 4.5 Downlight Round
CATALOG #: - : 5-3/4 : 6-1/2 ø4-1/2 ø5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm
More informationLumark PFPRV PREVAIL POLE AND FIXTURE COMBO
DESCRIPTION The Prevail TM LED pole and fixture combination makes selection and installation of poles and fixtures simple. Included is the die-cast Prevail area, site and roadway luminaire with standard
More information4DR 4.5 Downlight Round
CATALOG #: - : 5-3/4 : 6-1/2 ø4-1/2 ø5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Williams TrimLock reflector retention system eliminates trim sag Tunable white from 2700K to 5000K CCT, minimum
More informationQty: Pole Order Code: Series Height Finish Options. R4 Type IV. R5R Type V Round. Distribution. Distribution. 4C Quadruple Cluster.
Date: Customer: Project: Type: Qty: Beta Pendant LED Order Code: BPL BPL Series - - - - - - - - BPL Beta Pendant LED Pole Order Code: - - - Series Height Finish Options Optics R Type I Distribution R Type
More informationS43X. elliptipar high lumen. uplights S432 S431 S433 S434 PRODUCT
PRODUCT S43X elliptipar high lumen uplights S431 S432 S433 S434 PRODUCT»»» S43X elliptipar high lumen uplights your 4-digit Quickfinder code at www.thelightingquotient.com elliptipar... there is no equal
More information6DR 6 Downlight Round
- : 6-5/8 : 7-3/8 CATALOG #: ø6 ø7 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm from 1800K
More informationOkSolar LED Outdoor Luminaires
OkSolar 488500 LED Outdoor Luminaires 1.0 PURPOSE The purpose of this specification is to provide the minimum performance requirements for the LED Outdoor Luminaire Fixture. This specification refers to
More informationXSP Series XSP2 LED Street/Area Luminaire Double Module Version C
XSP Series XSP LED Street/Area Luminaire Double Module Version C Product Description Designed from the ground up as a totally optimized LED street and area lighting system, the XSP Series delivers incredible
More informationEvolve LED Roadway Lighting
GE Lighting Evolve LED Roadway Lighting LED Project Grade Streetlight () imagination at work Product Features The Evolve LED Streetlight is optimized for customers requiring a basic LED solution for local
More informationXSP Series XSPR LED Street/Area Luminaire Version A
XSP Series Product Description In addition to a low initial cost, the XSPR LED Street luminaire maintains the familiar look of the traditional cobrahead design and delivers substantial energy savings while
More informationBetaLED Recessed Canopy Luminaires
CAN-227-5M-RM "A" 8.8in [225mm] Driver Housing 350 ma HL option, 525mA, 700mA DIM A 12.8" [325mm] 23.8" [605mm] Fixture DIM B DIM C 90 LED 21.6" [549mm] 20.6" [523mm] 120 LED 26.2" [665mm] 25.125" [638mm]
More informationECO EXT (DIMMABLE)
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. ECO EXT (DIMMABLE) www.trulygreensolutions.com
More informationRitorno Square Asymmetrical LED
Date: Customer: Project: Type: Qty: Ritorno Square Asymmetrical LED Order Code: RSAL RSAL Series - - - - - - - Pole Order Code: - - - Series Height Finish Options RSAL Ritorno Square Asymmetrical LED Mounting
More informationLED lighting system. We Brighten Your Brands.
LED lighting system We Brighten Your Brands. Brilliance by design. PDL3 MODUS is a universal 1 for 1 upgrade of existing 400 W HID downlights, featuring application-based high (200 W), medium (150 W),
More informationRTR Gen 3/ LED Troffer Conversion Kit
The RTR Gen 3 troffer kit is designed by our expert in house lighting engineers and fabricated with custom made multi-stage roll forming machinery. This retrofit kit is an excellent alternative to tube
More informationLXSM Benefits & Features. Construction. Ordering Information SMALL 20W LED WALL PACK: FULL CUTOFF
LXSM301-20 SMALL 20W LED WALL PACK: FULL CUTOFF DLC Qualified Wall Pack meets full cut off criteria established by the IESNA. LED Module: An efficient, energy saving replacement for metal halide and high-pressure
More informationCree Edge Series LED Area Luminaire Round
Cree Edge Series LED Area Luminaire Round Product Description The Cree Edge Series has a slim, low profile design. Its rugged cast aluminum housing minimizes wind load requirements and features an integral,
More information. 100G. USSL series, MADE IN THE USA Solar street lights
USSL series, MADE IN THE USA Solar street lights. 100G General Specifications Light Fixture (Beta-LED CREE LED Fixture) Power consumption Lumen Color temperature IES lighting type Material 70 W 5180 lumens
More informationPhuzion LED High Bay Wet location listed
Catalog Number Notes Type Phuzion Wet location listed DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List
More informationDESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable
ORDER GUIDE Shown with ARO2 optics DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable TYPE: and efficient illumination of vertical NOTES: surfaces. Via 2 Asymmetric
More information