LIST OF PUBLISHED STANDARDS

Similar documents
LIST OF PUBLISHED STANDARDS

LIST OF PUBLISHED STANDARDS

LIST OF PUBLISHED STANDARDS

LIST OF PUBLISHED STANDARDS

LIST OF PUBLISHED STANDARDS

LIST OF PUBLISHED STANDARDS

SOUTH AFRICAN NATIONAL STANDARD

Hydro Business Partner Production Partner

LPG & CNG Codes & Standards in India

BSS Examination Record Form for Privately Owned and Managed Vessels

Data sheet - Selected technical standards

Joint Meeting Standards Working Group Report of the second meeting, Bern, March 2003

Fuels, Combustion and Environmental Considerations in Industrial Gas Turbines - Introduction and Overview

TRIX Oxygen hose - blue For the safe transport of oxygen - DIN EN ISO 3821

THE NETHERLANDS (N E D E R L A N D) COMMUNICATION

Alternate Fuel solutions

At Amico Labs we are dedicated to continued growth while producing products of outstanding quality, and providing excellent service.

AFV/EV Safety Training: Automotive Recycling. Instructor s Manual. National Alternative Fuels Training Consortium

E/ECE/324/Rev.2/Add.114/Rev.1 E/ECE/TRANS/505/Rev.2/Add.114/Rev.1

Annex of the Certificate (Page 1/4) Scope of Accreditation

BERMUDA LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988 BR 54 / 1988

Code of Practice 1 Part 2 : 2000 Amendment 1

THE NETHERLANDS (N E D E R L A N D) COMMUNICATION

British Standard institute-bs Valve Standards

Gas Apparatus & Pressure Controls

COMET Flashback Arrestors

Schedule A to the Memorandum of Understanding. Between the Oil and Gas Commission and British Columbia Safety Authority

822 NOVAMIX GAS FLOW RATE ADJUSTMENT AS A FUNCTION OF THE AIR FLOW GAS/AIR RATIO 1:1 DOUBLE AUTOMATIC SOLENOID SHUT-OFF VALVE

DUAL FUEL (DIESEL/LPG) SYSTEM OVERVIEW

Liquefied Petroleum Gases Bulk Storage: Guidelines for British Columbia s Provincial Industrial Railways

EVERY ALTERNATIVE ISLG Combustion Air and Emission Devices. Why Cooled EGR? 4/23/2013. Why Exhaust Gas Recirculation.

BERMUDA STATUTORY INSTRUMENT BR 54/1988 LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988

(2) An engine subject to this rule or specifically exempt by Subsection (b)(1) of this rule shall not be subject to Rule 68.

CutSkill GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES

as a fuel for mobility introduction of Regulations and homologation aspects linked to the

Requirements for Dispensing of Compressed Natural Gas. Yvonne Espinoza, PE Austin Fire Department Engineering Services

THE NETHERLANDS (N E D E R L A N D) COMMUNICATION

Petroleum industries are dealing with different hazardous materials starting from storing, processing and distributing the petroleum products These he

THE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-110R Extension number: 00

Technical Information

LIQUEFIED PETROLEUM GASES

Ignition Reliability in SGT-750 for Gas Blends at Arctic Conditions. Magnus Persson Combustion Expert / Distributed Generation / Sweden

Flame-transmission-proof KITO devices for storing and transporting combustible fluids, vapours and gases

SOUTH AFRICAN NATIONAL STANDARD

SPARE PARTS CATALOGUE SAFETY WELDING & CUTTING

REPORT OF THE MARINE ENVIRONMENT PROTECTION COMMITTEE ON ITS SEVENTIETH SESSION. Corrigendum

This document is a preview generated by EVS

INF.19 Economic Commission for Europe Inland Transport Committee. References to standards in RID/ADR/ADN and UN Model Regulations

Fuels Safety Program Compressed Gas Code Adoption Document - Amendment

Combination controls CG 10

Thai Lion Air Provision for Dangerous Goods Carried by Passengers or Crew. [ A Part of Table 2.3.A in IATA Dangerous Goods Regulation 60 th Edition ]

Thai Lion Air Provision for Dangerous Goods Carried by Passengers or Crew. (Table A of paragraph 9.2.5)

SOUTH AFRICAN NATIONAL STANDARD

Unit 7 Part 2 Introduction to Organic Chemistry Crude Oil: Sources and Uses of Alkanes UNIT 7 INTRODUCTION TO ORGANIC CHEMISTRY

HIGH QUALITY GAS PRODUCTS SINCE 1957

1070 SERIES ULTRA LOW NO X

Methods of combustion in combustion chambers that are specially adapted for generation of combustion products of high pressure or high velocity.

Table Fire Prevention Code Permit Requirements

PRESSURE EQUIPMENT EXEMPTION ORDER

Small craft Electric propulsion system

Flame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 320. Product Description. (Vertical, in-line, detonation )

E/ECE/324/Rev.2/Add.109/Rev.3/Amend.4 E/ECE/TRANS/505/Rev.2/Add.109/Rev.3/Amend.4

This document is a preview generated by EVS

Proposal for amendments to UN Regulation No. 110 CNG/LNG vehicles

Liquefied Petroleum Gas. Liquefied. Petroleum Gas. Product Reference Manual - Section 5 - Liquefied Petroleum Gas

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

LITEX MOTORS. Liquid Propane Injection Fuel System

Control pressure switch series FF 4

Australian/New Zealand Standard

3) Storage at construction sites for refueling construction equipment; or. 4) Storage at airports as addressed in Section of this Part.

Products: Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose. Metall Hose, Bellows and Compensators

Economic and Social Council

DIE-FORGED BRASS HEAD for maximum durability. UNIVERSAL GAS MIXER Gives top performance with any fuel gas. RIBBED BRASS HANDLE For sure grip &

Type 4 Cylinder Owner s Manual

This document is a preview generated by EVS

Transport conditions for the acceptance of Dangerous Goods

COMBUSTION EFFICIENCY THE EFFECT OF COMBUSTION ON THE EFFICIENCY OF THE HEATING APPLIANCE

Hydrocarbons 1 of 29 Boardworks Ltd 2016

COMET GAS CONSUMABLES

JOHNSON CONTROLS PARTS CENTRE. Sabroe S68 refrigeration oil

GV30 / GV30A SERIES GAS COMBINATION CONTROL SYSTEMS FOR COMMERCIAL COOKING APPLIANCES.

Noble Group of Institutions, Junagadh. Faculty of Engineering Department of Mechanical Engineering

pressure Body and Setting wrenching Orifice Pipe-Away Pipe-Away Style Size Inlet Valve Range Height Hex Size Adapter Outlet

Old documentation - Only for your information! Product is not available any more!

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Dangerous Goods. Transport Tanks

PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry)

Backup Power. Renewable Resources. Fleet Fueling. Industrial Applications Community Fueling. Personal Energy Station

Economic and Social Council

Flowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve

RULES OF SAFETY FIRE COMMISSIONER CHAPTER RULES AND REGULATIONS FOR LIQUEFIED PETROLEUM GASES TABLE OF CONTENTS

B. Uniform Regulation for the Method of Sale of Commodities as adopted by The National Conference on Weights and Measures*

Main changes in BV Rules for Steel Ships

Annex no. 1 of Accreditation Certificate no. LI 333 from

EZ-View. Flow Meters ISO CERTIFIED 9001

DATA SHEET. Model: TG3 Revision Date: September DUNPHY COMBUSTION LTD. Queensway Rochdale England OL11 2SL

Specifications of OPTIMA SLS Burners

รายการมาตรฐาน British Standard (BS) ส าหร บผล ตยางรายการส าค ญ

EXPLANATORY NOTE LIQUIFIED PETROLEUM GASES TRANSPORTED IN STATIONARY TANKS PERMANENTLY MOUNTED ON TRAILERS

An operational permit is required to conduct cutting or

Transcription:

Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 08:0.0 The design and installation of compressed natural gas (CG) vehicle filling stations 0-0-0 0-0-0 07-0-0 SS 5:00/BS 4089:999 Metallic hose assemblies for liquid petroleum gases and liquefied natural gases 00--4 00-05-08 SS 9:04 SS 87:0 Industrial thermoprocessing equipment - Safety requirements for combustion and fuelhandling systems The installation of pipes and appliances for use with natural gas 04-0-7 0--04 09-0-7 06--04 04-0-0 0-08- SS 09-:005/ISO 7-:994 SS 09-:005/ISO 7-:000 SS 56-:0 SS 7:0.0 made on the threads Part : Dimensions, tolerances and designation made on the threads Part : Verification by means of limit gauges Hose for natural gas and liquefied petroleum gas (LPG) Part : Hose and tubing for use in natural gas and liquefied petroleum gas vapour phase Single-stage regulators for liquefied petroleum gas (LPG) 005-0-5 005-04-0 0--4 0-0-0 I C 0-07-5 0-0-0 0-0-4 08-0-5 07--4 07-0-0 06-0- SS 06-:006/ISO 8-:000 SS 06-:990/ISO 8-:987 SS 59:07 SS 0006:006 4 5.0.0 not made on the threads Part : Dimensions, tolerances and designation not made on the threads Part : Verification by means of limit gauges ppliances operating on liquefied petroleum gas (LPG) or natural gas (G) - Safety aspects Colour marking and identification of medical gas cylinders and anaesthetic apparatus 006-08- 990-08- 07--5 006-06-5 006-08- 07--5 006-06-5 07-0-6 07-0-6 0--5 08-0-5 SS 0087-:0 6 installations Part : Liquefied petroleum gas installations involving gas storage containers of individual water capacity not exceeding 500 L and a combined water capacity not exceeding 000 L per installation 0-08-0 08-08-0 mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen

Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 0087-:0 SS 0087-:05 SS 0087-4:0 SS 0087-6:006 SS 0087-7:04 SS 0087-8:00 SS 0087-0:0 5 4.0 4.0 installations Part : Installation of LPG systems in mobile units, including but not limited to caravans, motor homes, park homes and mobile kitchens installations Part : Liquefied petroleum gas installations involving storage vessels of individual water capacity exceeding 500 L installations Part 4: The transportation of LP gas including the design, construction, inspection, fittings, filling, maintenance and repair of LP gas bulk vehicles and rail tank cars installations Part 6: The application of liquefied petroleum and compressed natural gases as engine fuels for internal combustion engines installations Part 7: Storage and filling premises for refillable liquefied petroleum gas (LPG) containers of gas capacity not exceeding 9 kg and the storage of individual gas containers not exceeding 48 kg installations Part 8: Filling containers for LP gas operated fork lift vehicles in-situ installations Part 0: Mobile filling stations for refillable liquefied petroleum gas (LPG) containers of capacity not exceeding 9 kg 0-07- 05-0-7 0-0- 006--0 04-0-7 00-08-0 0-0-0 006--0 0-0-0 06-07- 00-0-7 06-0- 0--0 09-0-7 0-05-6 07-0-0 mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen

Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 060-:004.0 Industrial gas pipelines Part : Distribution of oxygen, nitrogen and argon at consumer sites 004--0 004--0 05-0-6 SS 060-:004.0 Industrial gas pipelines Part : Distribution of hydrogen at consumer sites 004--0 004--0 05-0-6 SS 060-:004.0 Industrial gas pipelines Part : Distribution of acetylene at consumer sites 004--5 004--5 05-0-6 SS 060-4:004.0 Industrial gas pipelines Part 4: Distribution of carbon dioxide at consumer sites 004--0 004--0 05-0-6 SS 6:00/ISO 6:00 Petroleum and natural gas industries - Packaged reciprocating gas compressors 00-0-0 00-05-08 SS 4469-:00/ISO 4469:004 SS 4469-:00/ISO 4469-:007 SS 4469-:00/ISO 4469-:006 SS 5:00/ISO 5:007 (CG) refuelling connector Part : 0 MPa (00 bar) connector (CG) refuelling connector Part : 0 MPa (00 bar) connector, size (CG) refuelling connector Part : 5 MPa (50 bar) connector atural gas - Energy determination 00-06-5 00-06-5 00-06-5 00-06-7 00-08-8 00-08-8 00-08-8 05-06-7 SS 540-:00/ISO 540-:006 SS 540-:0/ISO/TR 540-:006 SS 5500-:00/ISO 5500-:000 SS 5500-:00/ISO 5500-:00 SS 5500-:00/ISO 5500-:00 SS 5500-4:00/ISO 5500-4:00 atural gas - atural gas for use as a compressed fuel for vehicles Part : Designation of the quality atural gas - atural gas for use as a compressed fuel for vehicles Part : Specification of the quality (CG) fuel system components Part : General requirements and definitions (CG) fuel system components Part : Performance and general test methods (CG) fuel system components Part : Check valve (CG) fuel system components Part 4: Manual valve 00--09 0-07-08 00-09- 00-06-5 00-06-5 00-06-5 I 00-09- 05--09 0-06- 0-0-7 0-0-7 0-0-7 0-0-7 mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen

Report : 08-05-0 Page o : 4 Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 5500-5:00/ISO 5500-5:00 SS 5500-6:00/ISO 5500-6:00 SS 5500-7:00/ISO 5500-7:00 SS 5500-8:00/ISO 5500-8:00 SS 5500-9:00/ISO 5500-9:00 SS 5500-0:00/ISO 5500-0:00 SS 5500-:00/ISO 5500-:00 SS 5500-:00/ISO 5500-:00 SS 5500-:00/ISO 5500-:00 SS 5500-4:00/ISO 5500-4:00 SS 5500-5:00/ISO 5500-5:00 SS 5500-7:00/ISO 5500-7:00 SS 5500-8:00/ISO 5500-8:00 (CG) fuel system components Part 5: Manual cylinder valve (CG) fuel system components Part 6: utomatic valve (CG) fuel system components Part 7: Gas injector (CG) fuel system components Part 8: Pressure indicator (CG) fuel system components Part 9: Pressure regulator (CG) fuel system components Part 0: Gasflow adjuster (CG) fuel system components Part : Gas/air mixer (CG) fuel system components Part : Pressure relief valve (PRV) (CG) fuel system components Part : Pressure relief device (PRD) (CG) fuel system components Part 4: Excess flow valve (CG) fuel system components Part 5: Gastight housing and ventilation hose (CG) fuel system components Part 7: Flexible fuel line (CG) fuel system components Part 8: Filter 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 00-06-5 0--08 0--0 0--0 0-0- 0-0- 0-0-7 0--0 0--0 0-0-7 0-0-7 0--0 0--0 0-0-7 SS 5500-9:00/ISO 5500-9:00 SS 5500-0:00/ISO 5500-0:007 (CG) fuel system components Part 9: Fittings (CG) fuel system components Part 0: Rigid fuel line in material other than stainless steel 00-06-5 00-06-5 0-0-7 0-0-7 mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen

Report : 08-05-0 Page o : 5 Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 5970:00/ISO 5970:008 SS 505:0/E 5:00 SS 50:00/E :998 SS 50676:00/E 676:00 atural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings utomatic forced draught burners for gaseous fuels 00-06-7 0-0- 00-- 00-- I 00-- 0-05-0 06-0- 00-09-04 05-- SS 5070-:004/E 70-:00 Gas welding equipment - Safety devices Part : Incorporating a flame (flashback) arrestor 004-04- 0-05-6 SS 5854:00/E 854:006 Pressure sensing devices for gas burners and gas burning appliances 00-07-0 0-05-0 CKS 605:987 Pressure regulators for medical gases 987-04-0 99-04-0 mendment otes: - ational or I - International - mendment, C - Corrigendum on mendment, C - Corrigendum, D - ddendum, E - Erratum, I - Information Sheet, K - Collective mendment, S - Supplemen