COMET Flashback Arrestors
|
|
|
- Barbara Sutton
- 6 years ago
- Views:
Transcription
1 Model F1 (regulator mounted) F1 Super Oxygen 5/8"-18 UNF RH Regulator outlet 1000 kpa F1 Super Fuel 5/8"-18 UNF LH Regulator outlet 500 kpa 557 (150 kpa Acetylene) 170 Flashback Arrestor Model F1 Super (Regulator Mounted) Part No Flashback Arrestor Model F1 Super (Regulator Mounted) Part No Designed for connection to the outlet of regulators, with the following features: Pressure actuated cut-off valve to prevent further gas flow after a flashback occurs. Operation is indicated by a signal level. After resetting the lever it is ready for immediate re-use. Large surface stainless steel conical flame arrestor. Pressure relief valve to vent excessive pressure. Temperature activated shut-off valve. Model F2R (regulator mounted) F2R Oxygen 5/8"-18 UNF RH Regulator outlet 1000 kpa F2R Fuel 5/8"-18 UNF LH Regulator outlet 500 kpa 533 (150 kpa Acetylene) 187 Flashback Arrestor Model F2R (Regulator Mounted) Part No Flashback Arrestor Model F2R (Regulator Mounted) Part No x F2R Oxygen; 1 x F2R Fuel Part No x F2R Oxygen Part No IND 25 x F2R Fuel Part No IND Designed for connection to the outlet of regulators and pipelines, with the following features: Medium-flow capacity. Temperature activated cut-off valve. NB: the thermal cut-off sealing element is not in the gas stream and is shrouded from flashbacks. The cut-off valve closes in the direction of flow assisted by a strong spring at an internal termperature of approximately 90 C. Operation is not indicated and the cut-off valve is not resettable by the user. 7
2 COMET Model F2B (blowpipe mounted) F2B Oxygen 5/8"-18 UNF RH Blowpipe inlet 1000 kpa F2B Fuel 5/8"-18 UNF LH Blowpipe inlet 500 kpa 693 Flashback Arrestor Model F2B (Blowpipe Mounted) Part No Flashback Arrestor Model F2B (Blowpipe Mounted) Part No x F2B Oxygen; 1 x F2B Fuel Part No x F2B Oxygen Part No IND 26 x F2B Fuel Part No IND Model F6 (blowpipe mounted) (150 kpa Acetylene) 220 Designed for connection to the inlet of blowpipes where medium flow is required (handheld and machine), incorporating the following features: Medium flow capacity F6 Oxygen 5/8"-18 UNF RH Blowpipe inlet 2000 kpa F6 Fuel 5/8"-18 UNF LH Blowpipe inlet 500 kpa 463 (150 kpa Acetylene) 148 Flashback Arrestor Model F6 (Regulator Mounted) Part No Flashback Arrestor Model F6 (Regulator Mounted) Part No x F6 Oxygen; 1 x F6 Fuel Part No x F6 Oxygen Part No IND 25 x F6 Fuel Part No IND Designed for connection to the inlet of blowpipes (handheld and machine), incorporating the following features: Cylindrical stainless steel flame arrestor. 8
3 QuickConnect Part No. Model Gas type Connections Connection to Pressure rating F6Q Fuel 5/8-18 UNF LH Blowpipe inlet Acet 150 kpa; LP/Nat Gas 500 kpa F6Q Oxygen 5/8-18 UNF RH Blowpipe inlet 2000 kpa F2RQ Fuel 5/8-18 UNF LH Regulator outlet Acet 150 kpa; LP/Nat Gas 500 kpa F2RQ Oxygen 5/8-18 UNF RH Regulator outlet 2000 kpa F2BQ Fuel 5/8-18 UNF LH Blowpipe inlet Acet 150 kpa; LP/Nat Gas 500 kpa F2BQ Oxygen 5/8-18 UNF RH Blowpipe inlet 2000 kpa Designed for connection to the inlet of blowpipes OR the outlets of regulators, with the following features: Quick disconnect for equipment storage Allows for quick connection and safe interchange of equipment Integral shutoff valve ensures gas tight seal when disconnected Unique barb design prevents improper gas connection Spare barbs available. Flashback Arrestor Model F6Q (Blowpipe Mounted) Part No Flashback Arrestor Model F6Q (Blowpipe Mounted) Part No Flashback Arrestor Model F2RQ (Regulator Mounted) Part No Flashback Arrestor Model F2RQ (Regulator Mounted) Part No Flashback Arrestor Model F2BQ (Blowpipe Mounted) Part No Flashback Arrestor Model F2BQ (Blowpipe Mounted) Part No Spare Parts F6Q, F2BQ (fuel) Part No F6Q, F2BQ (oxy) Part No F2RQ (fuel) Part No F2RQ (oxy) Part No
4 COMET Model /308859/308861/ Oxygen Various see ordering details 1000 kpa /308860/308862/ Fuel Various see ordering details 500 kpa 1040 (150 kpa Acetylene) P 85-10B Designed for high-flow applications: Blowpipe mounting (85-10B), Regulator mounting (85-10R) and Pipeline installations (85-10P). They incorporate the following features: High-flow capacity. Temperature activated cut-off valve R and 85-10P supplied with inlet filter B has offset connections to accommodate their size onto the blowpipe R takes full advantage of the CIGWELD high-flow regulators (TR92 Oxygen, TR93 Acetylene) with their 5/8 BSP high flow outlet connection R is suitable for use with COMET regulators fitted with the standard welding hose connection 5/8 -UNF. Conforms to EN730, ISO 5175 class I R 85-10R-LP Flashback Arrestor Model 85-10P (5/8 BSP) Part No Flashback Arrestor Model 85-10R (5/8 BSP - 5/8-18UNF) Part No Flashback Arrestor Model 85-10B (5/8-18UNF) Part No Flashback Arrestor Model 85-10R-LP (5/8-18UNF) Part No Flashback Arrestor Model 85-10P (5/8 BSP) Part No Flashback Arrestor Model 85-10R (5/8 BSP - 5/8-18UNF) Part No Flashback Arrestor Model 85-10B (5/8-18UNF) Part No Flashback Arrestor Model 85-10R-LP (5/8-18UNF) Part No NB: the thermal cut-off sealing element is not in the gas stream and is shrouded from flashbacks. The cut-off valve closes in the direction of flow assisted by a strong spring at an internal termperature of approximately 90 C. Operation is not indicated and the cut-off valve is not resettable by the user. P= Pipeline (High-flow) R= Regulator Mounted (High-flow) 5/8 BSP - 5/8-18UNF B= Blowpipe Mounted (High-flow) LP= Regulator Mounted (High-flow) 5/8-18UNF - 5/8-18UNF 10
5 Selection Chart Process Part Nozzle/Tip Size Regulator Regulator Mounted HOSE Blowpipe Mounted Number (Outlet pressure kpa) Flashback Arrestor Min ID Max Flashback Arrestor (mm) Length(m) WELDING , to 26 COMET 700 Oxy (4-15:50, 20-26:100) F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B COMET 700 Acet (4-15:50, 20-26:100) COMET 700 Oxy (150) 5 5 F2B, 85-10B COMET 700 Acet (100) F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B HEATING x 12 HT COMET 700 Oxy (350) F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B NOZZLES COMET 700 Acet (100) x 9 HT COMET 700 Oxy (500) F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B COMET 500 LPG (100) HEATING x12 HT COMET 700 Oxy (150) 5 5 F2B, 85-10B TIPS COMET 700 Acet (100) F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B X 12 (SHA1) COMET 700 Oxy (150) 5 5 F2B, 85-10B COMET 700 Acet (100) F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B x 12 (SHA2) COMET 700 Oxy (200) F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B COMET 700 Acet (100) x 12 (SHP1) COMET 700 Oxy (500) 5 10 F6, F/Buster F6, F2B, 85-10B COMET 500 LPG (100) F2R, F1 SUPER, 85-10R(-LP) 5 10 F2B, 85-10B F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B x 12 (SHP2) COMET 700 Oxy (600) F6, F/Buster F6, F2B, 85-10B COMET 500 LPG (100) F2R, F1 SUPER, 85-10R(-LP) F2B, 85-10B 85-10R(-LP) F/Buster F6, F2B, 85-10B x 12 (SHP3) COMET 700 Oxy (800) F2R, F1 SUPER, 85-10R(-LP) F2B, 85-10B COMET 500 LPG (150) x 15 (SHP4) TR92 Oxy (1000) F2R, F1 SUPER, 85-10R(-LP) F/Buster F6, F2B, 85-10B CUTTING Type 41 & 44 Oxy: COMET 700 Oxy 5 10 F6, F/Buster F6, F2B, 85-10B , , - 6, 8, 12, 15, 20 (up to 220l/min@450) F2R, F1 SUPER, 85-10R(-LP) 5 10 F2B, 85-10B , (up to 150mm Fuel: 41 - COMET 700 Acet (100), F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B plate thickness) 44 - COMET 500 LPG (150) F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B , TYPE 41 & 44 Oxy: COMET 700 Oxy F2R, F1 SUPER, 85-10R(-LP) F2B, 85-10B , , 32 (up to 450l/min@800) (greater than 150mm Fuel: 41 - COMET 700 Acet (150), plate thickness) 44 - COMET 500 LPG (150) Oxy: Fuel: 41 - COMET 700 Acet (150), F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B 44 - RIVET CUTTING RC Oxy: COMET 700 Oxy (500) 5 10 F6, F/Buster F6, F2B, 85-10B GOUGING , GB, 48GB, 64GB Fuel: 41 - COMET 700 Acet (100), F2R, F1 SUPER, 85-10R(-LP) 5 10 F2B, 85-10B , GS 44 - COMET 500 LPG (150) F2R, F1 SUPER, 85-10R(-LP) F6, F/Buster F6, F2B, 85-10B DG F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B FLAME WASHING x 51 FW Oxy: FLAME CLEANING mm Fuel: 41 - COMET 700 Acet (100), F2R, F1 SUPER, 85-10R(-LP) 5 20 F6, F/Buster F6, F2B, 85-10B mm 44 - Key to the chart Flashback arrestor model, placement, hose length, hose diameter, regulator outlet pressure and application inlet pressure are interrelated. For full protection it is essential all components have adequate flow capacity when used as an inter-connected system. Operation outside the recommendations eg. smaller hose diameter, longer length of hose, no flashback arrestor or smaller than indicated flashback arrestor could lead to flame instability and tip starvation. This increases the likelihood of a flashback. Combinations in the table above fall under two different categories: White Box Full protection is provided with both regulator mounted and blowpipe mounted flashback arrestors providing sufficient inlet pressure for the application to have optimum flow and flame stability. This should be selected wherever possible. Blue Box Only blowpipe mounted flashback arrestors can be fitted to allow sufficient inlet pressure for the application. These combinations should be used only when those highlighted white are not practical or possible. Note the level of protection will not be optimal. The maximum recommended safe length of hose is 30M. Greater lengths than this are not recommended due to pressure drop and the operator being too far from the cylinders. This table is for hand held blowpipe applications only, not for machine cutting applications. For more detailed information consult the flow charts of the relevant flashback arrestors. 11
COMET GAS CONSUMABLES
Insta COMET GAS CONSUMABLES CIGWELD.COM.AU CIGWELD introduces the next generation of Comet gas consumables, featuring a gas equipment world first in black nickel plating. This patented innovation from
CutSkill GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES
GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES CIGWELD.COM.AU GAS CUTTING & WELDING KITS TRADESMAN CUTTING & WELDING
DIE-FORGED BRASS HEAD for maximum durability. UNIVERSAL GAS MIXER Gives top performance with any fuel gas. RIBBED BRASS HANDLE For sure grip &
Victor Universal They combine the spiral and injector mixer principles. The result is a high performance torch that operates on any fuel gas. Universal torch cutting capacity from 1/8" (3.2 mm) to 8" (203.2
BUTBRO WELDING PRODUCTS
1190 ORBIT Lightweight Welding and Cutting Blowpipe A new superbly constructed welding & cutting blowpipe designed with safety in mind and engineered from highest quality materials to complement the operator
Maximise Your Product Sales!
Merchandising Catalogue Maximise Your Product Sales! Updated 09.02.2018 Helping our Distributors be more successful Take a stand with Weldclass... and watch your sales grow! Page 2 of 13 Helping our Distributors
Alternate Fuel solutions
Alternate Fuel solutions ONE TORCH, ALL FUELS Complete Lineup Torches, Handles and Attachments LPG Regulators Heating Nozzles Cutting Tips Outfits Alternative Fuel Solutions What you need to know about
OXY-FUEL EQUIPMENT. STARCUT Hand Cutting and Gouging Torches
STARCUT Hand Cutting and Gouging Torches 1 STARCUT 1615 and 3615 Hand Cutting and Gouging Torches According EN-ISO, BSP, CGA, NFE and AS standard. Fuel Gas Type A : Acetylene Hydrogen Fuel Gas Type PMYF:
MUST BE UL LISTED or EQUIVALENT
1 01 2 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: 50-700 IPM Package includes: #MMM252 (#907321) Welder
1500 Group Tips One-Piece Acetylene
One-Piece Acetylene 502 Series Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes Preheat in. m /4 6 /4 6 08Z67 6 69 68.7 /2 3 /2 24 5Z7 6 66 60.5 -/2 38 -/2 38 5Z8 6 65 53.3 2-4 50-00 4 02 5Z9
Gas Apparatus & Pressure Controls
Vanguard Hand Cutting Torches Specifications and Ordering Information ST2600 Vanguard Series - For use with any fuel gas. Uses Series 1 cutting tips Cuts 1/8"/3.25mm to 16"/400mm Includes Built-in patented
STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS
STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS SMB 600 / 663 HEAVY-DUTY HAND CUTTING TORCHES SMB 600 with angled torch head SMB 600 with straight torch head HEAVY-DUTY HAND CUTTING TORCH SMB 600 With spring
Gas Apparatus & Pressure Controls
Welding Torch Handles 315FC 315C HD 310C 100FC 100C Victor Torch Handles cover the full range of welding, cutting and heating needs. Choose from patented VanGuard or standard models. Performance matched
STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS
STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS SMB 600 / 663 HEAVY-DUTY HAND CUTTING TORCHES SMB 600 with angled torch head SMB 600 with straight torch HEAVY-DUTY HAND CUTTING TORCH SMB 600 With spring lever
LIST OF PUBLISHED STANDARDS
Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 08:0.0 The design and installation of compressed natural gas (CG) vehicle filling stations 0-0-0 0-0-0
SIRIOCOPT. A new handle that changes everything.
SIRIOCOPT A new handle that changes everything www.saf-fro.com SIRIOCOPT SIRIOCOPT is the new ergonomic and innovative cutting blowpipe designed and produced by our Verona Plant. This patented design makes
Machine Cutting Equipment. Torches and Nozzles for High Performance
Machine Cutting Equipment Torches and Nozzles for High Performance Edition 1/2010 GCE Group - the European market leader in gas control equipment GCE world-wide: http://www.gcegroup.com GCE is an experienced
AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps
Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable
XIII. Repair Parts 106
XIII. Repair Parts All Alpine Repair Parts may be obtained through your local authorized U.S. Boiler Company representatives or outlets. Should you require assistance in locating a U.S. Boiler Company
GOSS replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively
replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other
Sewer cleaning & sewer cleaning nozzles 08
Sewer cleaning & sewer cleaning nozzles 08 Coupling-system ST-245 175 Drain jet extension 178 Driver for rotating nozzles 179 High pressure hoses with smooth cover - 500 bar 170 Jetter Valves 178 Mini-nozzles
DOMESTIC LPG REGULATORS & ACCESSORIES MOVABLE TANKS TANK INSTALLATION CONNECTED WITH MANIFOLDS
MOVABLE TANKS Room volume < 10 m 3 Forbidden Room volume from 10 up to 20 m 3 Max 1 tank up to 15 Kg Room volume from 20 up to m 3 Max 2 tanks up to 20 Kg total Room volume from > 50 m 3 Max 2 tanks up
Flow rate l/min Burst pressure bar. ± 200 ± 200 ± 200 Accuracy ± 0,3 % ± 0,5 % ± 0,5 % Net weight kg
DIGITAL Meter Flow rate 35 l/min Flow rate 70 l/min Flow rate 40 l/min RAASM s digital meters, besides gauging the liquid delivered, can show instant flow rates, provide a reset total and allow the setting
KEYSTONE SERIES 320 BUTTERFLY VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood HAZARD POTENTIALS disregarding of instructions improper use of product insufficiently qualified personnel Valve application to be
" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3
"AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.
TRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
Automated Oxy-Fuel Cutting Systems
It s time to innovate Oxy-Fuel cutting. The next step in Oxy-Fuel Cutting from the market leaders! Automated Oxy-Fuel Cutting Systems FIT+ with tool free nozzle exchange FIT+ two with integrated ignition
INDUSTRIAL SPECIALTY GAS/LASER MEDICAL. Industrial Manifolds. Two Gas Blender Systems. Specialty Gas and Laser Manifolds
INDUSTRIAL 8-19 Industrial Manifolds 20-22 Two Gas Blender Systems Manifold Selection Guide...8 Series 200 Single Regulator Manifold...10 Series 210 Pressure Differential Switchover...12 Series 220 Pressure
OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL 301A Diesel Polypropylene Fuel Storage Rotary & Dispensing Drum Pump Kits 60040PA 301A 60045P Description The 600 litre series diesel fuel storage & dispensing
Data sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation
SECTION FACILITY FUEL - NATURAL GAS PIPING AND SYSTEMS
SECTION 23 11 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Fuel Pipe and Pipe Fittings - General 2. Steel Pipe and Fittings, Above Grade 3. Steel Pipe and Fittings, Below Grade 4. Polyethylene
Equipment Specification MK66E-M-PC Flamespray System
Equipment Specification MK66E-M-PC Flamespray System CONTROLLER / OPERATOR INTERFACE PISTOL GAS BOX MK66E-M-PC Sales Spec Page 1 Issue 2, 22/08/07 1 GENERAL The following specification covers the standard
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
ORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
Automated Oxy-Fuel Cutting Systems
It s time to innovate Oxy-Fuel cutting. The next step in Oxy-Fuel Cutting from the market leaders! Automated Oxy-Fuel Cutting Systems FIT+ with Tool-Free nozzle exchange FIT+ two with integrated ignition
PREMIUM PRODUCT DISPLAY STAND
339900 PREMIUM DISPLAY STAND 670AN4 20V Lithium-Ion Cordless 1 $1,190.00 $833.00 $833.00 5060AN Hi-Flo Refuelling Drum Pump 1 $421.00 $294.70 $294.70 8828N2 20L Gear Oil Drum Pump 1 $60.90 $42.63 $42.63
GENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691
Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................
Mueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
MF6. Drum Brake Linkage and Related Components TRACTOR MODEL OUR #
Drum Brake Linkage and Related 0 R Brake Pedal - RH M MF, (0 >SN ), Ind. Turf & Utility M R Brake Pedal - LH M MF, (0 >SN ), Ind. Turf & Utility R Bushing - Brake Pedal 0M MF, UK, 0,, UK, 0, 0,, 0, ( /"
COMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS The Caleffi Solar product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
INSTALLATION & MAINTENANCE MODEL mm
MODEL 65-25mm INSTALLATION INSTRUCTIONS CAUTION: Installation of Backflow Preventers must be performed by qualified, licensed personnel. The installer should be sure the proper device has been selected
"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01
"AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw
Air-Cooled Liquid Chiller with integrated hydraulic module
Air-Cooled Liquid Chiller with integrated hydraulic module Cooling only: CGAN 200-250 - 300-400 - 450-490 - 500-600 - 700-800 - 900-925 Reversible: CXAN 200-250 - 300-400 - 450-490 - 500-600 - 700-800
Spare parts list GREENSTAR CAMRAY. Burner 24/04/
Spare parts list 620620260 GREENSTAR CAMRAY 3 1 8 6 2 9 Burner 24/04/2009 620620260 1 24/04/2009 620620260 2 24/04/2009 620620260 3 Spare parts list 1 Cabinet Assembly rawing Heatslave 12/14 24/04/2009
MOONEY FLOWGRID SLAM SHUT REGULATORS
MOONEY FLOWGRID SLAM SHUT REGULATORS The Flowgrid Slam Shut Valve is an easy to maintain automatic shutoff device. 2 Dresser Mooney Flowgrid Slam Shut The Slam Shut is designed for use with a pressure
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Biogas safety control equipment
Biogas safety control equipment As environmental concerns and energy efficiency are increasing, efficient economical and safe gas control systems become an increasingly important part of operating the
Gas cylinder regulators
single-stage (1 BG 7) 20 bar (1 BG 7) 40 bar 251 1010-001 251 1020-001 251 100-001 (01 D-DE 56 172) 251 1120-001 hydrogen 251 140-001 compressed air 20 bar 251 1250-001 251 1260-001 251 1120-001 connection
HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
SV SERIES THE ORIGINATOR OF PISTON-TYPE SAMPLING VALVES
SV SERIES THE ORIGINATOR OF PISTON-TYPE SAMPLING VALVES STRAHMAN VALVES, INC. TABLE OF CONTENTS PAGE Quik Sampling Valve 2-3 The Original Piston-Type Sampling Valve 4 Sampling Valve Indicator 5 Hand Operated
Page ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
Tightness control TC. Product brochure GB Edition 12.10
Tightness control TC Product brochure GB 3.1.5. Edition 1.10 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted
INTERVALVE (ENGINEERING DATA SHEET)
GENERAL FEATURES PRODUCT SPECIFICATION MATL. OF CONSTRUCTION OPERATION Title VALVE TYPE VALVE MODEL DESCRIPTION DESIGN, MFG. STD. INTERVALVE (ENGINEERING DATA SHEET) Product Specification for IVEX - F
Transmig. Digital voltage and amperage meters Enclosure rated to IP23S 3 Year Limited Warranty* IDEAL FOR
WELDING EQUIPMENT GAS EQUIPMENT SAFETY EQUIPMENT PROMOTION 299. 00 WELDSKILL 130 Inverter W1002801 240V, single phase, 10A Current: 5-130A Duty Cycle: 130A@20% Electrode Size: 2-3.2mm Weight: 5.5kg Portable
Equipment Specification MK74 Powder Flame Spray System
Equipment Specification MK74 Powder Flame Spray System INTRODUCTION The following specification covers the entire standard range of MK74 flamespray system. For the specific offer, please refer to the attached
Data sheet. D-2011/05/ Date: 07/2013. Type TK1 CNG. CNG Fuelling Nozzle. for time filling of cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK1 CNG CNG Fuelling Nozzle for time filling of cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with
HC 350. Spare parts list. Hydraulic compactor. HC 350 s/n DEQ Construction Tools GmbH No
HC 350 Spare parts list Hydraulic compactor HC 350 s/n DEQ176000-2018 Construction Tools GmbH No. 3390801501 2018-01-01 General information This spare parts list applies to the following: Part number Description
BERMAD Irrigation. High Performance Plastic Valves. 100 Series - Water Control Solutions
High Performance Plastic Valves ater Control Solutions 100 Series hyflow High Performance Plastic Hydraulic Control Valves Features and Benefits Durable industrial grade valve design and construction uses
Data sheet. D-2011/05/ Date: 07/2013. Type TK4 CNG. CNG Fuelling Nozzle. for cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK4 CNG CNG Fuelling Nozzle for cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with receptacles acc.
1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
ID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
KEYSTONE. Butterfly valves Figure 9 Installation & Maintenance Instructions. Please read these instructions carefully
KEYSTONE Please read these instructions carefully This symbol indicates important messages and safety instructions. Hazard potentials: disregarding of instructions improper use of product insufficiently
PRESSURE CONTROL VALVES SABS 198
PRESSURE CONTROL VALVES SABS 198 1 CALVALVE DOUBLE BLOCK Pressure control combined pressure reducing valve and expansion relief valve, copper by copper compression ends. DZR alloy body. Replaceable cartridge
What's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
FRM. Medium Pressure Regulator. Medium pressure regulator Type FRM
FRM Medium Pressure Regulator Medium pressure regulator Type FRM Direct acting pressure regulator with adjustable setpoint springs and modular mounted safety shutoff valve (SAV) In compliance with EN 334
25198:- 1/31/12 11:24 AM Page 2 Filtration Systems
Filtration Systems Indufil Filtration Systems Global Leadership in Design Expertise and Technical Support From its origins more than 95 years ago, John Crane has become a world leader in the design, development
TBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
Accumulator Safety Blocks
Fluid Power Accumulator Safety Blocks All blocks have been designed and manufactured in the UK and are available from stock. WIND TIDAL HYDRO RENEWABLE DEFENCE SUBSEA PETROCHEMICAL AUTOMOTIVE HEAVY PLANT
INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143
8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial
SERIES 2000 GAS SAFETY SHUT OFF VALVE
APPLICATION 2 Series 00 Solenoid Valves are Safety Shut-off or Control Valves for use on gases in gas families 1, 2 and and are also suitable for use with air within the valves pressure range - see specification.
Butterfly Valve K 220 for application in the harsh environment of the chemical industry
Butterfly Valve K 220 for application in the harsh environment of the chemical industry Advantage DN 20 to DN 400 liner as a element liner makes additional flange seals superfluous cost efficient and direct
TURBO NOZZLE TD 3000 Z EN. WOMA Apparatebau GmbH. Technical Data: Description: Operating pressure: max bar
TURBO NOZZLE TD 3000 204 mm φ78 mm High pressure connection 9/16 18UNF LH or Protective disc Nozzle carrier head Rotary joint Protective tube Description: Technical Data: The TD 3000 is a highly efficient
BULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
Industry Standouts for Over 50 Years
» Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle
TURBO NOZZLE TD Description: Technical Data: Operating pressure: max bar
TURBO NOZZLE TD 1000 204 mm φ78 mm High pressure connection 9/16 18UNF LH or Protective disc Nozzle carrier head Rotary joint Protective tube Description: Technical Data: The TD 1000 is a highly efficient
CMTE. Tangential Fan Coil Series with Electronic Controlled Motor
Tangential Fan Coil Series with Electronic Controlled Motor Designed by Very Low Electric Energy Consumption High Efficiency Extremely Low Noise Level Infra Red Remote Control Step-less Fan Speed Control
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time MM1 Programmable Pipe Cutter The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on
M10Si ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12 Metso's Neles Neldisc series L12 a wafe type, metal seated high performance triple eccentric disc valve. With close to
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time.
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time. MM1 Programmable Pipe Cutter The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on
Pneumatic Products st»
» Pneumatic Products » Industry Standouts for Over 50 Years The benefits of an innovative, pneumatic coupling design were solid enough to single-handedly launch CEJN in 1955. This reliable, easy-to-handle
R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition
with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,
40041 Heavy Duty ADA System with Booster Bracket for JK Heavy Duty ADA System with Booster Bracket for 2012 to Current JK
40041 Heavy Duty ADA System with Booster Bracket for 2007-2011 JK 40044 Heavy Duty ADA System with Booster Bracket for 2012 to Current JK 40049 Heavy Duty ADA System Universal for all vehicles (booster
Model Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
ARGONITE Fire Protection Systems
GENERAL INFORMATION The Chemetron ARGONITE Fire Protection Systems are clean agent, automatic extinguishing systems using Argonite (IG55) and consisting of four basic components and their associated accessories.
IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Tr unnion Ball Valve s
www.swagelok.com Tr unnion Ball Valve s 83 Series and H83 Series Working pressures up to 10 000 psig (689 bar) 1/8 to 1/2 in. and 6 to 12 mm Swagelok tube fitting or NPT end connections 316 stainless steel
Nex Flow Offers Pneumatic Accessories to help reduce noise levels and improve the environment as well for better operation of product.
AESSORIES ex Flow Offers Pneumatic Accessories to help reduce noise levels and improve the environment as well for better operation of product. ex Flow and their master distributors and agents worldwide
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
Instruction Sheet. 1/2 HP Portable Electric Pumps SAFETY FIRST. L2062 Rev. F 02/ IMPORTANT RECEIVING INSTRUCTIONS 2.
Instruction Sheet 1/2 HP Portable Electric Pumps L2062 Rev. F 02/12 Index: English:...................................... 1-7 Français:.................................... 8-14 Deutsch:...................................
Recoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION
Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function
SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function Document No. 155-752 SKP25 U.. Description Only when assembled to Series VG Gas valves SKP25 pressure regulating
Installation, Operation & Maintenance Manual
IH106 Installation, Operation & Maintenance Manual ZV200 Bypass Valve Model ZV200 Bypass Valve Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection, maintenance
Yarway Hy-Drop Throttling valve
YARWAY Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation Features Dual range throttling - primary range plus a super capacity blast range. Rapid energy
HIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by