NP352 Series (Open Top)

Similar documents
NP276 Series (Open Top)

engineered to connect Full Product Line

680 Series QFP Socket

3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array

ENGINEERED TO CONNECT FULL PRODUCT LINE TEST SOLUTIONS

HyperGrip - Push/Pull Plastic Circular Connectors

MicroMate (MMCX) Amphenol Specifications

P Straight PCB Panel Mount Receptacle

Single 2 Piece Contacts: BTB

MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22

Adam Technologies, Inc.

Spring Pin Socket User Manual

TNC Series Series C TN 114

CYLER. Catalogue. Cyler Technology Limited cylerconnectors. Push-Pull connectors

Interface Mating Dimensions

Interface Mating Dimensions

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

SERIES MHV (H4) HIGH VOLTAGE CONNECTORS

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold

PRODUCT SPECIFICATION

97 series crimp type plugs with solid shells

MIL-DTL QPL'D 2 and 3 Row Printed Circuit Board Connectors

Series Overview *SOP (Small Outline Packages, Gullwing Leads) SMT Devices. Series IC51 (Clamshell) SOP, TSOP Type I & II

0.3 mm Pitch, 1.0 mm Height FPC Connector

1.27mm DUAL ROW STRAIGHT HEADER

SPRING - LOADED CONNECTORS


SMA Male Connector Solder Attachment for RG188-DS, RG316-DS

MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21

MDual Power Connector

MICRO SWITCH ESS SERIES

smpm connectors DIVIDER PAGE

High Performance, Microminiature Circular Connectors

341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing

S Straight PCB Panel Mount Plugs

Multi-Pole Rectangular Connectors Specifications Table

SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66

P Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION

High Performance, Microminiature Circular Connectors

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708

Features. * 2 Form C contact. * High switching capacity 60W, 125VA. * Fit standard 16 pin IC socket. * Epoxy sealed for automaitc-wave COIL

Amphenol-Tuchel Electronics 44 Series

Amphenol SCE2/Terrapin Series

ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001

PROTECTRON MONITORING CONNECTOR SYSTEM

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.

Mini USB and USB 2.0-IP67 Connector System

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

C&K E Series Sealed Miniature Toggle Switches

M8 Series. Key features: BUCCANEER

1000 Series Miniature Slide Switches

GHz BGA Socket User Manual

General Note #1 :Different kinds of IC Packages

E Series Sealed Miniature Toggle Switches

Coaxial SMA MaleTerminations

HBE 24 SCREW & CRIMP TERMINATED INSERTS

PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC

C&K 1000 Series Miniature Slide Switches

Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines.

Industrial Relay KML(1C, 2C)

Features/Benefits. Typical Applications

SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM

MCX SERIES. Description. Applications. Microminiature Coaxial Connectors

HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION

15100 VALVES. E. Section Building Automation and Control System Guidelines

C&K ET Series Sealed Subminiature Rocker Switches

CMC Hybrid Connectors Standard and Power Versions

38999 Series III Composite Connectors

DSUBMINIATURE CONNECTOR J SERIES

MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards

REP Series. Environmentally-Sealed Rectangular Plastic Connectors

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

APPLICATION INFORMATION APPLICATION INFORMATION

FRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron

CMC Hybrid Connectors Standard and Power Versions

nterconnect compatibility new SEALED CONNECTORS harsh environment dual seals for harsh environments ergonomic locking tab for easier mating

ET Series Sealed Subminiature Toggle Switches

SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43

Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton

Series 308 Electrical Specifications

C003-MA-XXX-Y. Technical Data Sheet Draft CABLE ASSEMBLY ROPD FEMALE CONNECTOR. General Information

0.5mm and 1mm Pitch FPC/FFC Connectors

A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.

BENEFITS 782 STANDARD PART NUMBERS FEATURES 782 XDX M4L- 120A ORDERING CODE DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FLAG INDICATOR:

ET Series Sealed Subminiature Rocker Switches

3M CP2 Press-Fit Headers and Sockets, 2 mm

General_technical_data Series

C&K E Series Sealed Miniature Toggle Switches

0.3 or 0.4 mm pitch, 3 mm above the board, Flip-Lock actuator, Flexible Printed Circuit ZIF connectors

ET Series Sealed Subminiature Rocker Switches

Amphenol RF Interconnects

2.92mm connectors DIVIDER PAGE

SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)

ET Series Sealed Subminiature Rocker Switches

0.5 mm and 1 mm Pitch FPC/FFC Connectors

Rack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS

Transcription:

Specifications Insulation Resistance: 1,000M min. at 100V DC Dielectric Withstanding Voltage: 100V AC for 1 minute Contact Resistance: 100m max. at 10mA/20mV max. Operating Temperature Range: 40 C to +150 C / -55 C to +150 C Contact Force: Mating Cycles: 15g per pin approx. 10,000 insertions minimun Part Number (Details) NP352-560 09 - * - * Series No. No. of Contact Pins Design Number Mark for Positioning Pins Materials and Finish Housing: Contacts: Plating: Polyetherimide (PEI), glass-filled Polyethersulphone (PES), glass-filled Beryllium Copper (BeCu) Gold over Nickel Features Contact Terminal Lengths and Form Open top type sockets with "Tweezer Style Contacts" For FBGA packages Secure package alignment due to self contacting structure without upper pressing force (ZIF) Contacting structure to nip the sides of solder balls to lower damages of coplanarity of solder balls Outline Base Socket Dimensions A±0.4 B±0.4 Yamaichi's 2-point Tweezer Contact IC Ball Socket Base A Contacts Socket Base B Since the solder balls are touched by two contacts on each side, the solder ball damage can be minimized; additional features are low actuation force and compact socket size D-36

Applicable Dimensions Part Number Pin Count Grid Size IC Dimensions Body Size(mm) Base Socket Dimensions A x B BGA Layouts see page NP352-04808 48 6 x 8 10 x 11 24.4 x 28.0 NP352-04811 48 6 x 8 10 x 14 24.4 x 28.0 NP352-04813 48 6 x 8 11 x 14 24.4 x 28.0 NP352-256-81-* 256 16 x 16 17 x 17 39.0 x 39.0 NP352-34534 345 21 x 21 23 x 23 62.0 x 62.0 NP352-103 AC-29401 352 26 x 26 27 x 27 47.0 x 47.0 NP352-56009 AC-19416 360 33 x 33 35 x 35 62.0 x 62.0 NP352-66 AC-29556 388 26 x 26 27 x 27 62.0 x 62.0 NP352-40025 400 29 x 29 31 x 31 62.0 x 62.0 NP352-400-40 400 25 x 25 27 x 27 62.0 x 62.0 NP352-432-44 432 25 x 25 27 x 27 62.0 x 62.0 NP352-436-68 436 33 x 33 35 x 35 62.0 x 62.0 NP352-48031 AC-21938 468 29 x 29 31 x 31 62.0 x 62.0 NP352-456-66 456 26 x 26 27 x 27 62.0 x 62.0 NP352-48031 480 29 x 29 31 x 31 62.0 x 62.0 NP352-484-87-*-* 484 26 x 26 31 x 31 47.0 x 47.0 NP352-484-98 484 22 x 22 23 x 23 62.0 x 62.0 NP352-152124 AC-21918 513 39 x 39 40 x 40 62.0 x 62.0 NP352-55212 552 29 x 29 31 x 31 62.0 x 62.0 NP352-56009 560 33 x 33 35 x 35 62.0 x 62.0 NP352-56009 AC-24855 560 33 x 33 35 x 35 62.0 x 62.0 NP352-64819 648 33 x 33 35 x 35 62.0 x 62.0 NP352-78832 AC-19367 660 38 x 38 40 x 40 62.0 x 62.0 NP352-676-103 676 26 x 26 27 x 27 47.0 x 47.0 NP352-1206-38AC-28934 677 36 x 36 37.5 x 37.5 55.8 x 55.8 NP352-115523.AC-22615 680 34 x 34 35 x 35 62.0 x 62.0 NP352-87-*-* AC-27191 696 30 x 30 31 x 31 47.0 x 47.0 NP352-724-95 724 34 x 34 35 x 35 62.0 x 62.0 NP352-87-1-1 AC-28845 764 30 x 30 31 x 31 47.0 x 47.0 NP352-76814 768 38 x 38 40 x 40 62.0 x 62.0 NP352-78832 788 38 x 38 40 x 40 62.0 x 62.0 NP352-152124 AC-25245 792 39 x 39 40 x 40 62.0 x 62.0 NP352-829-50 829 39 x 39 40 x 40 62.0 x 62.0 NP352-83615 836 31 x 31 33 x 33 62.0 x 62.0 NP352-1008-39 1008 43 x 43 45 x 45 74.0 x 74.0 NP352-106426-* 1064 43 x 43 45 x 45 74.0 x 74.0 NP352-115523 1155 34 x 34 35 x 35 62.0 x 62.0 NP352-1206-38 1206 36 x 36 37.5 x 37.5 55.8 x 55.8 NP352-129636 1296 36 x 36 37.5 x 37.5 62.0 x 62.0 NP352-1296-52 1296 36 x 36 37.5 x 37.5 74.0 x 74.0 NP352-152124 1521 39 x 39 40 x 40 62.0 x 62.0 NP352-1521-53 1521 39 x 39 40 x 40 74.0 x 74.0 NP352-160018 1600 41 x 41 42.5 x 42.5 74.0 x 74.0 NP352-1600-54-* 1600 40 x 40 45 x 45 74.0 x 74.0 NP352-1849-35 1849 43 x 43 45 x 45 74.0 x 74.0 NP352-2116-71 2116 46 x 46 47.5 x 47.5 74.0 x 74.0 D-37

Grid Size 6 x 8 NP352-04808 Pin Count: 48 Body Size: 10x11 Base Socket Size: 24.4x28.0 NP352-04811 Pin Count: 48 Body Size: 10x14 Base Socket Size: 24.4x28.0 NP352-04813 Pin Count: 48 Body Size: 11x14 Base Socket Size: 24.4x28.0 Grid Size 16 x 16 Grid Size 21 x 21 Grid Size 22 x 22 NP352-256-81 Pin Count: 256 Body Size: 17x17 Base Socket Size: 39.0 x 39.0 Grid Size 25 x 25 NP352-34534 Pin Count: 345 Body Size: 23x23 NP352-484-98 Pin Count: 484 Body Size: 23x23 NP352-400-40 Pin Count: 400 Body Size: 27x27 Base Socket Size: 62.0 x 62.0 NP352-432-44 Pin Count: 432 Body Size: 27x27 Base Socket Size: 62.0 x 62.0 Grid Size 26 x 26 Continued NP352-103 AC-29401 Pin Count: 352 Body Size: 27x27 NP352-66 AC-29556 Pin Count: 388 Body Size: 27x27 NP352-456-66 Pin Count: 456 Body Size: 27x27

Grid Size 26 x 26 NP352-484-87 Pin Count: 484 Body Size: 31x31 NP352-676-103 Pin Count: 676 Body Size: 27x27 Grid Size 29 x 29 NP352-40025 Pin Count: 400 Body Size 31x31 NP352-48031 AC-21938 Pin Count: 468 Body Size: 31x31 NP352-48031 Pin Count: 480 Body Size: 31x31 NP352-55212 Pin Count: 552 Body Size 31x31

Grid Size 30 x 30 Grid Size 31 x 31 NP352-87 AC-27191 Pin Count: 696 Body Size 31x31 NP352-87-1-1 AC-28845 Pin Count: 764 Body Size: 31x31 NP352-83615 Pin Count: 836 Body Size 33x33 Grid Size 33 x 33 NP352-56009 AC-19416 Pin Count: 360 Body Size 35x35 NP352-436-68 Pin Count: 436 Body Size 35x35 NP352-56009 Pin Count: 560 Body Size 35x35 NP352-56009 AC-24855 Pin Count: 560 Body Size 35x35 NP352-64819 Pin Count: 648 Body Size 35x35

Grid Size 34 x 34 NP352-115523 AC-22615 Pin Count: 680 Body Size 35x35 NP352-724-95 Pin Count: 724 Body Size 35x35 NP352-115523 Pin Count:1155 Body Size 35x35 Grid Size 36 x 36 NP352-1206-38 AC-28934 Pin Count: 677 Body Size 37.5x37.5 NP352-1206-38 Pin Count:1206 Body Size:37.5x37.5 NP352-129636 Pin Count:1296 Body Size 37.5x37.5 NP352-129652 Pin Count:1296 Body Size 37.5x37.5

Grid Size 38 x 38 NP352-78832 AC-19367 Pin Count: 660 Body Size 40x40 NP352-76814 Pin Count: 768 Body Size: 40x40 NP352-78832 Pin Count: 788 Body Size: 40x40 Grid Size 39 x 39 NP352-152124 AC-21918 Pin Count: 513 Body Size: 40x40 NP352-152124 AC-25245 Pin Count: 792 Body Size: 40x40 NP352-829-50 Pin Count: 829 Body Size: 40x40 NP352-152124 Pin Count: 1521 Body Size: 40x40 NP352-1521-53 Pin Count: 1521 Body Size:40x40 D-42

Grid Size 40 x 40 Grid Size 41 x 41 NP352-1600-54-* Pin Count: 1600 Body Size 45x45 NP352-160018 Pin Count:1600 Body Size:42.5x42.5 Grid Size 43 x 43 NP352-1008-39 Pin Count:1008 Body Size 45x45 NP352-106426 Pin Count:1064 Body Size: 45x45 NP352-1849-35 Pin Count:1849 Body Size:45x45 Grid Size 46 x 46 NP352-2116-71 Pin Count:2116 Body Size 47.5x47.5 D-43