APEX CHAIN AND CABLE INC. PRODUCT LINE CARD ***PLEASE INQUIRE ABOUT OUR COMPLIMENTARY INSPECTIONS*** ACCO-ANVER ACTEK MFG. BUDGIT CAMPBELL CAN-AM CASTERS / COLSON CARR-LANE COLUMBUS McKINNON CROSBY GLEASON REEL APEX RIGGING APEX SYNTHETIC SLINGS INTER-PRODUCT / RENFROE / MERRILL IGUS SERVICES: CERTIFICATION / PROOFTESTING CERTIFIED CUSTOM DEVICES LIFT ALL McKISSICK TECNOMAGNETE TRACTEL STAINLESS STEEL YOKE THERN VACU-LIFTS, LOUDEN IMPERIAL & METRIC HOIST RINGS CHAIN & WIRE ROPE HOISTS CHAIN, SLINGS, COMPONENTS FULL LINE OF CUSTOM QUALITY CASTERS JIG & FIXTURE TOOLING COMPONENTS CHAIN PULLERS, HOISTS & ALLOY COMPONENTS SHACKLES, WIRE ROPE FITTINGS, HOIST RINGS, HOSE & CABLE REELS COMPONENT CHAIN SLINGS, CRANE CABLES, CUSTOM WIRE ROPE SLINGS, AND GENERAL PURPOSE WIRE ROPE NYLON, POLYESTER, BALLISTIC, AND ROUND SLINGS LIFTING CLAMPS POWER TRACK & IGLIDE CERTIFICATION AND PROOFTESTING OF DEVICES SPECIALIZED LIFTING COMPONENTS MESH SLINGS, LOAD HUGGERS SHEAVES & BLOCKS PERMANENT LIFTING MAGNETS AND WORK HOLDING FALL ARREST, LOAD MEASURE EQUIPMENT FITTINGS, WIRE ROPE, CUSTOM ASSEMBLIES & CUSTOM LIFTING DEVICES ALLOY CHAIN COMPONENTS WINCH SPECIALISTS ***DELIVERED TO YOU BY OUR TRAINED PROFESSIONALS*** ***COMPLETE CATALOGS AVAILABLE UPON REQUEST***
Date 6/3/2014 INSPECTED BY: CHAIN INSPECTION REPORT APEX CHAIN & CABLE Inc. The following items were inspected in accordance with the annual inspection requirement of Regulation 851 of the Ontario Occupational Health and Safety Act. (OHSA) The inspection was done in accordance with the recommendations of ASME Standards B30.20 Below-the-Hook Lifting Devices, B30.26 Rigging Hardware, B30.9 Slings, B30.10 Hooks and B30.16 Hoists. DAMAGE PHN: 519-751-8085 FAX: 519-751-8005 ACCEPT REPAIR SCRAP Mast Link Couplings Legs Hooks ID TAG Date Tag Other Location Serial Number W.L.L. Lbs. Type Size Reach RECOMMENDATIONS Date Returned Repair PO# REPAIR STATUS 17
Lifting Rings DNV Master Links Cer ed to DNV 2.7-1, type approval no. S-7732 For o shore container li ing and cold weather use with Charpy V-notch impact Value s of > 42 Joule At -20 C. All DNV links are specially heat treated a er proof tes ng to minimize the risk of hydrogen embri lement and stress corrosion cracking. Every link is batch coded for cer cate recogni on. Master Links Dimensions mm Type Old Part Number Being replaced Dia. Inside Length Inside Width WLL tonne 5:1 Mass kg/unit Part Number OML220DNV N/A 22 270 140 5.8 2.3 2-MA22ML OML255DNV N/A 25 270 140 8.83 3.3 2-MA25ML OML280DNV N/A 28 270 140 11.8 3.8 2-MA28ML OML320DNV N/A 32 270 140 17.1 5.1 2-MA32ML OML360DNV N/A 36 270 140 23.0 6.5 2-MA36ML OML400DNV N/A 40 280 155 28.1 8.5 2-MA40ML OML450DNV 28-1-3/4 ML 45 320 175 38.3 12.2 2-MA45ML OML500DNV 28-2 ML 50 350 195 45.0 16.6 2-MA50ML OML600DNV 28-2-1/4 ML 60 430 230 65.0 29.2 2-MA60ML OML700DNV 28-2-3/4 ML 70 480 260 85.0 44.3 2-MA70ML 25
Lifting Rings DNV Quad Assemblies Cer ed to DNV 2.7-1, type approval no. S-7732 For o shore container li ing and cold weather use with Charpy V-notch impact Value s of > 42 Joule At -20 C. All DNV links are specially heat treated a er proof tes ng to minimize the risk of hydrogen embri lement and stress corrosion cracking. Every link is batch coded for cer cate recogni on. Master Link - Quad Assemblies Type Old Part Number Being Replaced Dimensions mm D IL IW d il iw WLL tonne 5:1 Mass kg/unit Part Number OSA160DNV 28-7-8MLA 16 150 75 13 90 50 4.1 1.3 2-MA16QA OSA220DNV 28-5/16MLA 22 270 140 16 150 75 5.8 3.8 2-MA23QA OSA220SDNV 28-3/8MLA 22 162 90 20 140 70 8.83 3.6 2-MA22QAS OSA255DNV N/A 25 270 140 20 140 70 8.83 5.3 2-MA25QA OSA280DNV N/A 28 270 140 20 140 70 11.8 5.9 2-MA26QA OSA280SDNV 28-1/2MLA 28 200 110 22 140 70 14.5 5.5 2-MA28QAS OSA320DNV N/A 32 270 140 26 185 90 17.1 9.7 2-MA32QA OSA360DNV 28-5/8MLA 36 270 140 28 190 100 23.0 11.9 2-MA36QA OSA400DNV N/A 40 280 155 32 200 110 28.1 16.4 2-MA40QA OSA450DNV 28-3/4MLA 45 320 175 36 225 125 38.3 23.5 2-MA45QA OSA500DNV 28-7/8MLA 50 350 195 40 260 130 45.0 32.3 2-MA50QA OSA600DNV 28-1MLA 60 410 220 50 350 195 65.0 63.9 2-MA60QA OSA700DNV 28-1-1/4MLA 70 480 260 60 410 220 85 102.6 2-MA70QA Number Size mm ML/SL WLL 5:1 @ 45º in tonne WLL 5:1 lbs WLL 5:1 lbs WLL 5:1 lbs WLL 4:1 lbs WLL 4:1 lbs WLL 4:1 lbs @ 60 horiz. @ 45 horiz. @ 30 horiz. @ 60 horiz. @ 45 horiz. @ 30 horiz. 2-MA16QA 16/13 4.1 11,070 9,040 6,390 13,830 11,300 7,990 2-MA23QA 22/16 5.8 15,660 12,780 9,040 19,570 15,980 11,300 2-MA22QAS 22/20 8.83 23,840 19,460 13,760 29,800 24,330 17,200 2-MA25QA 25/20 8.83 23,840 19,460 13,760 29,800 24,330 17,200 2-MA26QA 28/20 11.8 31,860 26,000 18,390 39,820 32,510 22,990 2-MA28QAS 28/22 14.5 39,150 31,960 22,600 48,930 39,950 28,250 2-MA32QA 32/26 17.1 46,170 37,700 26,650 57,710 47,120 33,320 2-MA36QA 36/28 23 62,100 50,700 35,850 77,620 63,380 44,810 2-MA40QA 40/32 28.1 75,870 61,950 43,800 94,840 77,430 54,750 2-MA45QA 45/36 38.3 103,400 84,430 59,700 129,260 105,540 74,630 2-MA50QA 50/40 45 121,500 99,200 70,150 151,880 124,000 87,680 2-MA60QA 60/50 65 175,500 143,300 101,320 219,380 179,120 126,660 2-MA70QA 70/60 85 229,500 187,400 132,500 286,880 234,240 165,630 26
GALVANIZED WIRE ROPE SLINGS Galvanized Wire Rope Slings (5:1 by design API spec. 9a table 3.7) Diameter of Wire Rope vs. standard length for Pricing Length 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-1/2" 1-3/4 2 2-1/4 2-1/2 2 ft 9.78 12.56 - - - - - - - - - - - - 3 ft 10.51 13.96 21.81 29.19 - - - - - - - - - - 4 ft 11.24 15.37 24.44 32.56 56.53 80.83 - - - - - - - - 5 ft 12.00 16.78 27.07 35.94 62.01 87.68 125.59 195.83 - - - - - - 6 ft 12.72 18.19 29.71 39.30 67.50 94.55 134.24 207.18 279.41 444.05 - - - - 7 ft 13.46 19.60 32.36 42.63 72.98 101.40 142.90 218.51 296.13 467.14 P.O.R - - - 8 ft 14.19 21.01 35.00 46.05 78.48 108.27 151.52 229.86 312.86 490.25 P.O.R - - - 9 ft 14.93 22.41 37.63 49.43 83.96 115.14 160.13 241.21 329.58 513.35 P.O.R P.O.R - - 10 ft 15.68 23.82 40.26 52.81 89.43 121.99 168.71 252.56 345.67 536.46 P.O.R P.O.R P.O.R - 11 ft 16.41 25.23 42.91 56.17 94.93 128.86 177.31 263.91 363.04 559.56 P.O.R P.O.R P.O.R P.O.R 12 ft 17.15 26.64 45.55 59.54 100.41 135.71 185.89 275.25 379.76 582.65 P.O.R P.O.R P.O.R P.O.R 15 ft 19.35 30.88 53.46 69.68 116.86 156.30 211.66 309.30 429.93 651.96 P.O.R P.O.R P.O.R P.O.R 20 ft 23.04 37.92 66.65 86.54 144.28 190.59 254.61 366.04 513.54 767.47 P.O.R P.O.R P.O.R P.O.R Std. eye 2"x 4" 3"x 6" 4"x 8" 5"x10" 6"x12" 7"x14" 8"x16" 9"x18" 10"x20" 12"x24" 14 x28 16 x32 18 x36 20 x40 WLL (ton) 0.65 1.4 2.5 3.9 5.6 7.6 9.8 12 15 21 28 37 44 54 Weight / foot 0.116 0.26 0.46 0.72 1.04 1.42 1.85 2.34 2.89 4.16 5.67 7.39 9.36 11.6 ** All wire rope slings made with EIPS, IWRC Galvanized Wire rope with steel ferrule and Flemish roll splice complete with tag showing size, length, WLL and manufacture. 5 57
Synthetic Rope Oletec-12 meets or exceeds dielectric requirements per ASTM F1701-05 NovaBlue meets or exceeds (upon request) US MIL Spec # MIL-R-24677 Cdn MIL Spec # 40-GP-16M NovaBlue meets or exceeds (upon request) US MIL Spec # MIL-R-24050D Cdn MIL Spec # 40-GP-16M DYNEEMA 12 Dyneema-12 is a hollow braided 12-strand rope made from Dyneema ber. It has a high weight to strength ra o with very li le stretch. Custom slings are available ready made from manufacturer. 86