VERTICL LINDS ND CONSERVTORY WNINGS safe timeless beautiful markilux 869 / 869 Elegant and delicately contoured the vertical, tensioned blind for large areas optionally with tracfix system to close the cover gap and provide extra stability in windy conditions The markilux 869 without tracfix is rated to wind resistance class 2 or 3 (depends on the blind size) (corresponds to eaufort 5 or 6). Units with tracfix are rated to wind resistance class 3 (corresponds to eaufort 6) www.markilux.com markilux
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS side view markilux 869 units with the optional tracfix system have no annoying gap between the cover and the guide track. When completely extended the front profile finishes flush with the end of the guide tracks reveal fixture markilux 869 Design features Technical Specification Optional ccessories beautifully crafted, teardrop-shaped aluminium cassette only 141 mm in height the compact, rounded profiles make it discreet and unobtrusive when retracted the cover is protected from the weather by the cassette, which encloses it completely stand-off fixture from the façade. This embellishes the building still further special vario-belts ensure optimum cover tension when the blind is completely extended the blind cover is guided along sturdy, aluminium guide tracks the 85 mm roller tube ensures the highest rigidity and the best possible cover winding characteristics even at the largest sizes width or drop up to 6 metres the blind is completely pre-assemb led and tested in the factory brackets with clip-on mechanism for easy, problem-free installation individual, made-to-measure manufacture, so that the shading system fits your house perfectly hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation an easily installed, radio control light and wind sensor guarantees comfort and a degree of safety even in your absence radio-controlled motor with radio remote control for ease of use tracfix system attractive completely closed appearance with no annoying gap between the blind cover and guide tracks. When completely extended the front profile finishes flush with the end of the guide tracks markilux PVC window for blinds with covers in sunvas or sunsilk fabric 78 Special features www.markilux.com
markilux 869 / 869 tracfix VERTIC L LINDS ND CONSERVTORY WNINGS Dimensions and configuration options 01 M 0 151 0 250 1 250 300 251 300 350 301 350 overall width 02 400 351 400 450 401 450 500 451 500 550 501 550 600 551 600 03 M min. 433 + 4.8 150 1) 0 1) 250 1) 300 1) H 400 1) 450 63 500 550 600 76 2 3 3 07 08 09 dimensions in cm 05 06 350 1) 04 11 4 12 1) tracfix (optional) these sizes meet wind resistance class 2; all the sizes that have not been so marked meet wind resistance class 3 13 tracfix blinds are only available with motor (surcharge) 14 Operation / Drive unit 15 Frame colours standard 3) winding handle operation 4) hard-wired motor standard optional 5) optional 16 traffic white RL 9016 17 metallic aluminium RL 9006 18 io radio controls grey brown, similar to RL 8019 19 radio-controlled motor (433 MHz) non-standard powder-coated finish 3) not available in tracfix units Colours similar to those in the RL chart. Colours may differ 4) in tracfix units slightly from those depicted in both hue and finish. 5) optional without tracfix motor 2 no. brackets per track www.markilux.com 433 radio-controlled motor (433 MHz) M available in tracfix units H fixture width / order width min. M minimum fixture width unit height Dimensions and configuration options 79 21
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS Covers fabric range no. 1) up to a unit height of 450 cm (in tracfix units: 400 cm), with vertical bonded seams up to a unit height of 450 cm (in tracfix units: 400 cm) vertical bonded seams; seamless oversized sunvas fabric only available up to a max. fixture width of 400 cm 3) up to a fixture width of 400 cm (in tracfix units: fixture width 400 cm and unit height of 400 cm), depending on the width and unit height with horizontal bonded seam 4) up to a unit height of 400 cm, vertical stitched seams, not available in tracfix units 5) up to a fixture width and unit height of 400 cm, depending on the width and unit height with horizontal bonded seam (in tracfix units: seamless, from a unit height of approx. 2 cm with horizontal seam) standard optional sunsilk snc 3 xx / 328 xx / 369 xx 1) sunvas snc 3 xx / 311 xx 313 xx 315 xx sunsilk perla FR 374 xx 1) transolair 338 xx 3) perfotex 332 xx 4) vuscreen LU 317 xx 5) vuscreen FR 318 xx 5) sunvas perla 370 xx 1) dditional information The width of the blind cover is always less than that of the blind. The tolerance in unit height is + 40 / 40 mm. standard gearbox is operated from outside the building using a stainless steel winding handle (handle lengths 1, 140, 160, 180 or 2 cm). In the case of manual operation it takes approximately 18 turns per metre of overall unit height to extend the system. In the case of motor operation the blind will take approx. 14 seconds per metre to extend. N.! If the motor is used continuously it will stop automatically after 3 to 4 minutes to prevent overheating. In the case of a bank of blinds operating simultaneously, the same speed of rotation of the motors cannot be guaranteed because of the internal tolerances of the motors. This model is only available as a single unit. Depending on the size of the blind, deflection may be in evidence in individual profiles and sections of profile which is completely unavoidable. This affects neither the functionality nor the durability of the awning. Miscellaneous Dimensions and tolerances standard optional width tracfix light sensor and wind sensor markilux PVC windows 6) 6) only available with sunsilk and sunvas; see Optional ccessories ; not available in tracfix units housing tolerance + 5 / blind cover width on request blind cover length on request 80 Covers / Miscellaneous / Dimensions and tolerances / dditional information www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 869 / 869 tracfix Fixtures, fittings and accessories Flat track bracket 80 6,50 fixture type, 15 flat track bracket assembly double flat track bracket assembly 2 single units 01 02 03 33 04 731. 05 Track bracket, stand-off fixture footprint dimensions of adjustable track bracket 06 07 08 09 1 85 8,5 40 double track bracket assembly with adjustable head height 80 mm 2 single units 1 85 8,5 40 double track bracket with adjustable head height 0 mm 2 single units 1 85 8,5 40 double track bracket with adjustable head height 140 mm 2 single units 11 12 732. universal track bracket height 80 mm 733. universal track bracket height 0 mm 734. universal track bracket height 140500 mm 13 14 15 78542. 78543. 78545. 16 fixture type fixture type 21 fixture type 22 17 track bracket with adjustable head track bracket with adjustable head track bracket with adjustable head 18 height 80 mm height 0 mm height 140 mm 19 78451. 78538. 78539. 21. insert RL colour code no www.markilux.com Fixtures, fittings and accessories 81
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS Fixtures, fittings and accessories ccessories fixture type 15 additional angled bracket bearing/gearbox/motor side, 50 50 80 mm (fixture between beams, walls etc.) please order additional accessories 787211! 787211 fixture type 15 accessories two angled brackets 76603. decorative cap assembly for track bracket to be used with: 78081., 78086., 78094., 787., 78451., 78538., 78543., 78454., 78663. 76604. decorative cap assembly for track bracket to be used with: 78082., 78087., 78095., 785., 787., 788., 78251., 78539., 78540., 78545., 78665., 78664., 78685. 726. bracket assembly for fixture of flat track bracket, to the markilux syncra 2 for fixture types and 15 bracket assembly for fixture of flat track bracket, to the markilux pergola for fixture types and 15 reducing bolt assembly M M 6 / SW 13 30 mm length refer to the section Technical Information 753211. insert RL colour code no 82 Fixtures, fittings and accessories www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 869 / 869 tracfix Fixture combinations / Fixture types ll brackets incur a surcharge Fixture type * 01 02 03 04 05 06 Fixture type 15* 07 08 09 Fixture type * 11 12 78451. 13 14 Fixture type 21* 85 15 16 17 78538. 18 19 5 Fixture type 22* 21 78539. 145 *From a unit height of 30 mm, 3 brackets per track; from an extension of 50 mm, 4 brackets per track Individual bracket combinations see Fixtures, fittings and accessories. Please note the minimum quantity required for the width and unit height you intend to order! www.markilux.com Fixture combinations / Fixture types 83
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS Dimension overview markilux 869 / 869 tracfix Schematic diagram of the dimensions when using fixture combination 146 M 126 M M 48 S H H H H min. 0 max. 300 130,5 min. 0 max. 800 186 (25) T (25) [35] 48 48 Schematic diagram of the dimensions when using fixture combination 15 IW M IW - 30 M M - 48 S H H H H min. 0 max. 300 min. 0 max. 800 130,5 186 48 48 (25) T (25) [35] S H H M M T ( ) [ ] drive side unit height nominal height mounting axis drop overall blind width blind fixture width fixture width order width cover width gap between cover and guide track (non-tracfix units) gap between cover and guide track (non-tracfix units) in gearbox-operated units 84 Dimension overviews www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 869 / 869 tracfix Dimension overview markilux 869 / 869 tracfix Schematic diagram of dimensions when using fixture combination H H 211 126 M M 48 130,5 min. 0 max. 300 min. 0 max. 800 Schematic diagram of dimensions when using fixture types,, 21, 22 186 (25) T min. M1 max. 300 S drive side M overall blind width 48 HH mounting axis H unit height order height H drop T cover width P fixture type HT bracket type HH fixture bracket height T depth M blind fixture width fixture width order width M 1 installation dimensions at the top ( ) gap between cover and guide track (non-tracfix units) [ ] gap between cover and guide track (non-tracfix units) in gearbox-operated units HT M T (25) [35] 48 48 1 12,5 12,5 85 P:, 21, 22 M 40 40 80 15 15 50 S 8 6 M 186 H H P 21 22 HT 78451. 78538. 78539. HH mm 85 mm 5 mm 145 mm T 146 mm 211 mm 231 mm 271 mm M 1 6 186 186 186 01 02 03 04 05 06 07 08 09 11 12 13 14 15 16 17 18 19 21 www.markilux.com Dimension overview / Installation 85
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS Installation of the markilux 869 / 869 tracfix to the markilux pergola 1 / 2 Dimension overview M M + 48 min. 2 max. 300 M M + 48 SM M S SM M 70 46 66 min. 0 max.800 SM M S 70 SM M SM P: 15 SM M 46 66 SM 86 46 70 M SM - 172 M M + 48 dimensions M in mm 40 4 SM M SM P: 15 70 46 66 SM 86 46 70 M SM - 172 M M M + 48 M 40 P M fixture type detailed view, fixture type detailed view, fixture type 15 blind fixture width fixture width order width SM fixture width, SM support post markilux syncra 2 M overall blind width M + 48 mm bracket assembly for fixture of flat track bracket, to the markilux pergola 1 / 2 flat track bracket (fixture type and 15) 86 additional angle bracket, bearing / gearbox / motor side (fixture type 15) 70 86 Installation of the markilux 869 / 869 tracfix to the markilux pergola www.markilux.com 46
VERTICL LINDS ND CONSERVTORY WNINGS markilux 869 / 869 tracfix Installation of the markilux 869 / 869 tracfix to the markilux syncra 2 Dimension overview 726. 726. min. 0 min. 0 max. 800 max. 300 SM M M SM M P: 15 726. M SM-4 M SM M SM M SM M P: 15 M SM-4 M SM P fixture type detailed view, fixture 122 type detailed view, fixture type 15 40 M blind fixture width fixture width order width SM fixture width, support post markilux syncra 2 M overall blind width M + 48 mm 152 726. bracket assembly for fixture of flat track bracket, to the markilux syncra 2 726. flat track bracket (fixture type and 15) additional angle bracket, bearing / gearbox / motor side (fixture type 15) M www.markilux.com Installation of the markilux 869 / 869 tracfix to the markilux syncra 2 87 M 140 152 140 726. 40 726. M 140 M 122 726. 152 40 726. 140 M 122 152 M 152 140 152 01 02 03 04 05 06 07 08 09 11 12 13 140 14 15 16 17 18 19 21
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS Reveal fixture markilux 869 / 869 tracfix Reveal fixture, motor operation min. 150 146 max. 170 186 130,5 Reveal fixture, manual operation min. 2 146 max. 170 125 184 88 Reveal fixture www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 869 / 869 tracfix Overview of cable exit point dimensions markilux 869 / 869 tracfix 9 13,5 29 01 02 03 04 05 06 07 08 09 11 12 13 14 15 16 17 18 19 21 www.markilux.com Overview of cable exit point dimensions markilux 869 / 869 tracfix 89
markilux 869 / 869 tracfix VERTICL LINDS ND CONSERVTORY WNINGS 90 www.markilux.com