MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid

MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid Being first is good, being smart is better, being both is Simply the Best! 1

PRODUCT PORTFOLIO Oglaend System offer a broad range of cable support systems for all applications, e.g. cabie Iadders, cable trays, junction box racks, tubing clamps, cable cleats, heating cables, control systems etc. If you need further information, please do not hesitate to contact us! Company presentation Download our latest version of product catalogues from: www.oglaend-system.com 2

www.oglaend-system.com Discipline guide: MultiGrid Support System Electro / Instrument / Telecom HVAC Piping SYMBOLS FOR MATERIAL TYPES: PG = Pre galvanized steel 20 my zink HDG = Hot Dip Galvanized NS/ISO 1461* SS = Stainless Steel AISI 316L** AL = Aluminium 5052 H22/H32 *) Steel quality for HDG: Steel grade EN 10130 Grade DC01 **) Steel quality for SS: EN 1.4404 Other material qualities on request. SYMBOLS FOR SCREWS: 2(4) M10x25 2 M10x60 1 M10x20 2(4) M6x12 6 4x25 This symbol shows type of screw, the number needed and name. For order no. see page 81. SYMBOL EXAMPLES: Expansion bolts 2 pcs. needed. Type M10x60. Locking screws 1 pcs. needed. Type M10x20. Hexagonal screws Minimum 2 pcs. needed. (4) May be used*. Type M6x12. Self tapping screw 6 pcs. needed. Type 4x25. Standard: Screws are included! The number of screws and nuts before the brackets are included when ordering the part. (4) Screws in brackets are NOT included! The number in brackets represents the number of screws that can be fitted to fix the part. These must be ordered separately. Screws NOT Included! SNI: Screws not included. SNI Contents: Subject to minor changes without notice. Check our website for latest issues. Catalogue Portfolio 2 Explanation of symbols 3 MultiGrid MultiGrid : Multidiscipline support introduction 4 Starters Starting Brackets (Welded and bolted) 12 Channels Mekano Channels 14 Mekano Channels Data Sheets 18 E, I & T MultiGrid : Electro, Instrumentation & Telecom 56 Angle Brackets and Various Items Brackets for Cable Trays Accessories Earth Jumpers and Lug Splice Connectors for Channels 66 Beam Clamps 68 Instrument and other E, I & T products ETIN tubing clamps, SmartCleat, Lighting, Rack, Instrument stands and equipment plates Ask for our special catalogues: 69 HVAC MultiGrid : HVAC 70 Piping MultiGrid : Pipe Support Standard Details 72 for Ships MultiGrid : Ships 75 for Concrete Multidiscipline for Concrete Constructions Brackets and Channels solutions 76 in FRP Multidiscipline support system in FRP 78 Miscellaneous Products UNO, U-Bolts, Safety-Hooks, El-Insulation details 79 Self-Locking Bolt Sets Bolts & Fixing items 80 Other Perforated Channels 82 Sales Locations 83 Patents and design applications Many of Oglaend System s products are patented or protected by design applications. Mekano Channels Low weight, full system compatibility and considerable torsion strength. Material thickness from 1,5-5 mm. Surface treatment Standard: Pickled and passivated. Study the new patented 125 mm design on page 17. 3

MultiGrid Multidiscipline Support MultiGrid is an integrated support system for all main disciplines such as electrical, instrumentation, telecom, HVAC and piping. A key feature is the compatible components which gives you maximum support flexibility across the disciplines. This offers you the freedom to use the system for one or two disciplines, or three or four if you like. The system provides a bolted solution for supporting all disciplines. MultiGrid MultiGrid is the concept name of the entire multidiscipline support system. The MultiGrid concept covers all welded and bolted starter brackets, all channels and frames. Mekano Mekano is the concept name of all channels and fixing accessories for MultiGrid. The Mekano channels are multidiscipline and used for creating support and support frames. All Mekano parts are marked in red in the following system drawings. Discipline Parts Discipline guide MultiGrid Support System for: Electro / Instrument / Telecom HVAC Piping Discipline parts for Electro/Instrument/ Telecom are marked ingreen, HVAC are marked in blue and Piping parts are marked in yellow. 4

Our value proposition: Design & Engineering MultiGrid is available in Aveva s PDMS format along with our cable ladders, trays and Intergraph s Smart Plant 3D. See page 74. Modeling using MultiGrid in our PDMS or SP3D catalogues in the detailed design stage can generate Total System Cost savings of up to 35% in an EPC contract. Reduce Total System Cost MultiGrid is designed to optimize all factors contributing to the Total System Cost of a construction project. The Total System Cost can be reduced by up to 30 percent. Cross section data from: MultiGrid included: Material Qualities Supplied in both Stainless Steel AISI 316L and Hot Dip Galvanized Carbon Steel. Other material qualities can be made available on request. Quick Installation Our patented system and product solutions make the installation work very simple and quick. In co-operation with your engineering and installation team we can tailor an installation manual that will secure the quality and the time schedule of the installation. Installation time reduction up to 60 percent. Less Weight & Volume The combination of an integrated support system for all disciplines and patented component solutions generates approximately 30 percent weight savings and 15 percent volume savings. Improved Safety Performance Our system and product solutions reduces the installation time significantly through the constuction phase of an EPC contract. Fewer manhours on site minimize the safety risk. Long Life & Integrity A key feature of MultiGrid is the compatibility of the components across the disciplines. The compatibility and flexibility of this system has been the same for over 30 years. This makes your future investment secure and guarantees that modifications will be straight forward. MultiGrid is compatible with our FRP product line. 5

MultiGrid Support System The idea behind MultiGrid is that welding brackets are welded in a square pattern (e.g. 1200 x 600 cm). These are welded early in the construction phase, and later sandblasted and painted along with the steel structure. The broad range of starter brackets and channels provide excellent support for any discipline. TW! The utmost use of MultiGrid MultiGrid delivers modification flexiblity, and eliminates need for hot work. No shut down required. 1 2 Start by welding starter brackets in a grid pattern before painting the main structure. For increased flexibility a horizontal Mekano channel can be bolted to the starters. MultiGrid bolted support for the future No welding No sand blasting No painting 6

Provide lowest possible Total System Cost The broad range of brackets in the MultiGrid system enable support for different loads. The starters should always be selected based on the load capacity needed. The grid pattern is decided through a dialogue between the engineering experts. All grid starters and Mekano channels are fully compatible in order to provide flexibility and deliver lowest possible Total System Cost. Above: Grid system and starters welded & ready for area painting. 3 4 Vertical and horizontal Mekano channels can be bolted to the starters to support any discipline. MultiGrid : Your flexible low weight support system, safe and easy to install and flexible in terms of future modifications. Whatever support you decide, the solution may be preassembled before installation. 7

How to get started: Choose starters according to the required load capacity Increased load capacity HOT WORK FOR HOT WORK Welded Starters See full range page 10-11 Page 12 We offer welded starters for whatever support solution you need! 8 The Mekano Support Channels See the full range page 14-17 Increased load capacity Choose channels according to the required load capacity

Choose starters according to the required load capacity Increased load capacity FOR COLD WORK Bolted Starters See full range page 12-13 COLD WORK Page 14 We offer bolted starters for whatever support solution you need! The FRP Support Channels combined with FRP or Steel Starters give required load capacity. See page 78. Increased load capacity 9

FOR HOT WORK Welded Starters Typical support for Electrical, Instrumentation & HVAC Type states length and recommended channel 111 111 S-M WB-125-CH50-1* 125 40 Used with Mekano Channel Type S-M CH50-1 S-M WB-200-CH50-1 Type T Weight Art. no. Art. no. mm kg CS** SS S-M WB-125-CH50-1* 6 0,2 1302511 1371695 S-M WB-200-CH50-1 6 0.3 1302512 1371696 *) Welding Brackets L = 125 mm normally not in stock **) CS steel quality: S235JR 200 40 50-1 111 111 200 300 114 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 S-M WB-300-CH100-2T 4 2,5 Contact us 1301061 S-M WB-ST-220-CH100-2T 4 1,2 Contact us 1301073 S-M WB-300-CH100-2T3 4 2,3 Contact us 1302061 (only for 100-2T3 channel) S-M WB-IN-225-CH100-2T 5 1,4 Contact us 1301059 *) Check for online updates 99 220 111 111 300 90 90 225 Used with Mekano Channel Type S-M WB-200-CH100-1 100-2T2 100-2T3 90 90 90 125 200 300 S-M WB-125-CH100-1* S-M WB-200-CH100-1 S-M WB-300-CH100-1 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-125-CH100-1 6 0.5 1302507 1371691 S-M WB-200-CH100-1 6 0.8 1302508 1371692 S-M WB-300-CH100-1 6 1.2 1302509 1371693 S-M WB-200-CH50-2 Used with Mekano Channel Type S-M CH100-1 S-M CH100-2T *) CS steel quality: S355J2-Y05 100-1 100-2T S-M CH100-1 S-M CH50-2T S-M CH100-2T2 114 109 91 93 S-M WB-ST-200- CH50-2 120 175 150 S-M CH50-2T S-M WB-ST-220-CH100-2T S-M WB-ST- 175-CH100-3 S-M WB-ST-175-CH100-3 S-M WB-150-CH100-3 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-ST-175-CH100-3 4 1.3 1372516 1372517 S-M WB-150-CH100-3 4 1.2 1372514 1372515 S-M CH100-2T2 S-M CH100-3 Used with Mekano Channel Type S-M CH100-3 100-3 10 *) CS steel quality: S235JR

Welded Starters Typical for Piping & heavy loads Type states length and recommended channel FOR HOT WORK S-M WB-125-CH50-2 125 S-M WB-200-CH50-2 61 61 61 61 61 61 61 61 S-M WB-300-CH50-2 S-M WB-ST-200-CH50-2 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-125-CH50-2 6 0.6 82210 82211 S-M WB-200-CH50-2 6 1.0 1302514 1371698 S-M WB-300-CH50-2 6 1.5 1302599 1371699 S-M WB-ST-250-CH50-2 6 0.9 84287 84283 200 Used with Mekano Channel Type S-M CH50-2 S-M CH60-2 S-M CH50-2T 50-2 60-2 50-2T *) CS steel quality: S355J2-Y05 300 170 250 240 113 113 150 150 S-M WB-CH100-4 S-M WB-PL-CH100-4 S-M WB-FP-CH100-4 Type T Weight Art. no. Art. no. mm kg CS SS S-M WB-CH100-4 6 3 1372606 1372601 S-M WB-PL-CH100-4 6 5.5 N/A 1372552 S-M WB-FP-CH100-4 6 12 N/A 1372602 Used with Mekano Channel Type S-M CH100-4 8 200 240 100-4 200 6 250 240 200 200 *) CS steel quality: S355J2-Y05 CS brackets are uncoated and not available in HDG. S-M WB-200-CH100-2T S-M WB-300-CH100-2T3 S-M CH100-2T3 S-M WB-CH100-4 S-M WB-150-CH100-3 S-M CH100-3 S-M CH100-4 11

FOR COLD WORK Bolted Starters Typical support for Electrical, Instrument & HVAC Type states recommended channel Bolted solutions for concrete, see page 77. 160 Used with Mekano Channel Type S-M CH100-1 S-M BS-CH100-1 105 S-M CH100-2T 100-1 100-2T Type T Weight Art. # Art. no. mm HDG SS S-M BS-CH100-1 3 1.2 61092 1371707 S-M BC-ST-HD S-M CH100-3 76 110 M12 bolts S-M BS-CH100-1 S-M CH100-1 S-M BC-240 S-M CH50-2T S-M BS-CH100-4 S-M CH100-2T See page 68 for further details S-M BC-FC (x2) M12 bolts 200 120 200 150 200 200 8 8 8 240 240 240 172 150 S-M BC-ST-HD S-M BS-CH100-3 Type T Weight Art. # Art. no. mm kg HDG SS S-M BC-ST-HD 4 2,4 N/A 86887 S-M BS-CH100-3 4 3,6 1372493 1372492 90 Used with Mekano Channel Type S-M CH100-3 S-M CH100-4 100-3 100-4 S-M BC-160 S-M BC-300 Type T Weight Art. no. Art. no. mm kg HDG SS S-M BC-FC 4 0.37 85196 85197 S-M BC-160 3 1.16 85621 85622 S-M BC-300 3 1.7 85623 85624 Used with Mekano Channel Type S-M CH50-1 S-M CH50-2 S-M CH50-2T1,5 S-M CH50-2T2 12 50-1 50-2 50-2T 113 S-M BS-CH100-4-B S-M BS-CH100-4-C S-M BS-CH100-4 Type T Weight Art. # Art. no. mm kg HDG* SS S-M BS-CH100-4-C 6 4.5 1372522 1372523 S-M BS-CH100-4-B 6 4.9 1372554 1372555 S-M BS-CH100-4 6 5.5 1372603 1372550 Used with Mekano Channel Type S-M CH100-4 100-4 *) CS steel quality: S355J2-Y05

FOR COLD WORK Bolted Starters Typical for Piping & heavy loads Type states recommended channel S-M BC-CH100-3 S-M BS-CH60-2 96 Type T Weight Art. # Art. no. mm HDG SS S-M BS-CH60-2 4 2.5 1371424 1371423 103 Used with Mekano Channel Type S-M CH60-2 S-M CH50-2T1.5 S-M CH50-2T2 S-M CH100-2T2 S-M CH100-2T3 60-2 50-2T 100-2T 200 200 8 200 200 200 200 8 8 109.5 500 95 S-M BT-CH100-3 S-M MG-CA See page 68 for further details Type T Weight Art. no. Art. no. mm HDG SS S-M BC-CH100-3 4 3 1372490 1372491 S-M BT-CH100-3 4 3.5 1372494 1372495 S-M MG-CA 3 80926 1372497 Used with Mekano Channel Type S-M CH100-2T2 S-M CH100-2T3 S-M CH100-3 100-2T2 100-2T3 100-3 120 200 100 300 300 Type T Weight Art. no. Art. no. mm kg HDG* SS S-M BS-200-CH100-2T 4 4,2 1371426 1371425 S-M BS-300-CH100-2T 4 5,0 1371428 1371427 S-M BS-300-CH100-2T3 4 4,9 1303359 1303358 (For CH100-2T3 channel) 415 400 M16 bolts S-M BC-MS-CH100-4 (See Page 63 for details.) Fit-range HE240-1000A/B *) CS steel quality: S355J2-Y05 100-2T2 100-2T3 Type T Weight Art. # Art. no. mm kg HDG SS S-M BC-MS-CH100-4 5 16 1372519 1372520 Used with Mekano Channel Type S-M CH100-4 100-4 S-M BS-CH60-2 S-M CH60-2 S-M BC-CH100-3 S-M CH100-3 S-M BC-MS-CH100-4 S-M CH100-4 13

Support Channels for Electrical, Instrument & HVAC Electro / Instrument / Telecom HVAC Piping Increased load capacity Mekano 50-1 Mekano 50-2 Mekano 100-1 Single and Double Single and Double Mekano 50-2T Mekano 100-2T S-M CH50-1 S-M CH50-2 S-M CH100-1 S-M CH50-2T S-M CH100-2T Data: Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m S-M CH50-1-3 1.5 1.3 S-M CH50-2-3 1.5 1.7 S-M CH100-1-3 1.5 1.7 S-M CH50-2T1,5-3 1.5 1.4 S-M CH50-2T2-3 2.0 1.8 Ordering list: S-M CH100-2T2-3 2.0 3.8 Type states width, material Type states width and length Type states width and length Type states width and length thickness and length Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS Type HDG SS Type HDG SS S-M CH50-1-3 1371684 1371687 S-M CH50-2-3 1302506 1371689 S-M CH100-1-3 1371649 1371685 S-M CH50-2T1,5-3 1372186 1372181 S-M CH50-2T2-3 1372187 1372182 S-M CH100-2T2-3 1372189 1372184 Calculation basis Channel material thickness (mm) Channel Type: CH50-1 (1.5) CH50-2 CH100-1 (1.5) CH100-1 (1.5) CH50-2T CH50-2T CH100-2T Double (1.5mm) Single Double (1.5mm) (2mm) (2mm) A E 305 215 214 427 222 222 461 I TE 237 169 160 319 33 853 41 015 273 205 I XE 127 000 81 598 31 4961 629 922 35 062 71 015 521 996 I YE 44 790 81 598 11 960 40 000 55 062 71 015 521 996 W XP 5 082 2 663 6 299 12 599 1 682 2 168 7 844 W YP 1 991 2 663 762 1 850 1 682 2 168 7 844 C TP 158 113 106 213 2 492 3 101 12 217 DW = Dead Weight KN = Kilo Newton 14 A E - Effective cross-section area (mm 2 ) I TE - Effective moment of inertia, torsion (mm 4 ) I XE - Effective moment of inertia, bending about X-axis (mm 4 ) I YE - Effective moment of inertia, bending about Y-axis (mm 4 ) W XP - Moment of resistance, bending about X-axis, perforated (mm 3 ) W YP - Moment of resistance, bending about Y-axis, perforated (mm 3 ) C TP - Moment of resistance, torsion, perforated (mm 3 )

Support Channels for Piping & heavy loads Electro / Instrument / Telecom HVAC Piping Increased load capacity Mekano 50-2T Mekano 100-2T Mekano 60-2 Double and Single Perforated Mekano 100-3 Mekano 100-4 2,5mm 3mm S-M CH50-2T S-M CH100-2T S-M CH60-2* *) Made to order only S-M CH100-3* *) Made to order only S-M CH100-4-3 S-M CH100-4-5 Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m S-M CH50-2T2,5-3 2.5 2.4 S-M CH60-2-A-3 6 5.3 S-M CH100-3-2.5 2.5 5.3 S-M CH100-4-3-6 3 8.5 S-M CH100-2T3-3 3.0 6.0 S-M CH100-4-5-6 5 13.7 Type states width, material Type states width, material Type states width, material Type states width, material thickness and length thickness and length thickness and length thickness and length Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS Type HDG SS Type HDG SS S-M CH50-2T2,5-3 1372188 1372183 Double perforated S-M CH100-3-0.5 80912 80267 3mm thickness S-M CH100-2T3-3 1372190 1372185 S-M CH60-2-A-3 1371432 1371430 S-M CH100-3-1 80913 80268 S-M CH100-4-3-6 1372525 1372526 Single perforated S-M CH100-3-1.25 80914 80460 5mm thickness S-M CH60-2-B-3 1371431 1371429 S-M CH100-3-2.5 1372504 1372505 S-M CH100-4-5-6 1372530 1372531 CH50-2T CH100-2T CH60-2 CH100-3 CH100-4 CH100-4 (2.5mm) (3mm) (6mm) (2.5mm) (3mm) (5mm) 240 722 633 777 1023 1 642 54 474 449 902 7 524 1 619 2 516 957 3 972 831 88 245 789 750 220 797 1 073 537 1 596 639 2 428 086 88 245 789 750 220 797 1 347 007 1 596 639 2 428 086 26 278 11 792 4 902 17 267 28 016 42 284 26 278 11 792 4 902 23 961 28 016 42 284 4 171 19 343 1 121 578 44 467 70 680 Channels are included in Staad.Pro (contact us for library) by Bentley by EDR 15

Support Channels for Electrical, Instrument & HVAC Mekano 50-1 Standard length = 3 m. Mekano 100-1 Other lengths as per your specific material take off requirement (MTO) can be provided as specialty products. T: 1.5 mm T: 1.5 mm Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS S-M CH50-1-3 1371684 1371687 S-M CH100-1-3 1371649 1371685 Mekano 100-2T Mekano 50-2T Mekano 50-2 T: 2 mm Art. no. Art. no. Type HDG SS S-M CH100-2T2-3 1372189 1372184 T: 1.5 & 2 mm Art. no. Art. no. Type HDG SS S-M CH50-2T1,5-3 1372186 1372181 S-M CH50-2T2-3 1372187 1372182 T: 1.5 mm Art. no. Art. no. Type HDG SS S-M CH50-2-3 1302506 1371689 16

Support Channels for Piping & heavy loads Mekano 50-2T Mekano 60-2* *) Made to order only Mekano 100-2T Mekano 125-2T NEW! NEW! T: 2.5 mm Art. no. Art. no. Type HDG S S-M CH50-2T2,5-3 1372188 1372183 T: 6 mm A B Art. no. Art. no. Type HDG SS S-M CH60-2-A-3 1371432 1371430 S-M CH60-2-B-3 1371431 1371429 T: 3 mm Art. no. Art. no. Type HDG SS S-M CH100-2T3-3 1372190 1372185 T: 5 mm Art. no. Art. no. Type HDG SS S-M CH125-2T5-3 1303399 1303398 Mekano 100-3* *) Made to order only Mekano 100-4 T: 2.5 mm Art. no. Art. no. Type HDG SS S-M CH100-3-0.5 80912 80267 S-M CH100-3-1 80913 80268 S-M CH100-3-1.25 80914 80460 S-M CH100-3-2.5 1372504 1372505 T: 3 & 5 mm Art. no. Art. no. Type HDG SS S-M CH100-4-3-6 1372525 1372526 S-M CH100-4-5-6 1372530 1372531 17

A guide to standard U-, L-, T- and Cantilever support Choose starters and Channels according to the required load capacity Using Channels: Mekano 50-2 Vertical Mekano 50-2 Horizontal Mekano 100-1 Horizontal For complete spesifications and ordering list see data sheet page U: 01 U: 02 CH50-2-1,5 CH50-2T2 p 19 p 20 CH100-1 p 19 up to: p 55 Mekano 50-2T-1,5 Vertical Mekano 50-2T-1,5 Horizontal Mekano 100-1 Horizontal U: 03 CH50-2T1,5 U: 05 CH50-2T1,5 C: 01 CH50-2T1,5 p 21 p 23 CH100-1 p 41 Mekano 50-2T2 Vertical Mekano 50-2T2 Horizontal Mekano 100-1 Horizontal U: 04 CH50-2T2 p 22 U: 06 CH50-2T2 p 26 CH100-1 U: 07 CH50-2T1,5 p 24 CH100-1 U: 08 CH50-2T1,5 p 25 CH100-1 C: 02 CH50-2T2 p 42 Mekano 100-2T-2 Vertical Mekano 100-2T-2 Horizontal U: 09 CH100-2T2 U: 10 CH100-2T2 U: 11 CH100-2T2 L: 01 CH100-2T2 C: 03 CH100-2T2 T: 01 CH100-2T2 p 27 p 28 p 29 p 36 p 43 p 50 Mekano 50-2T2,5 Vertical Mekano 50-2T2,5 Horizontal U: 12 CH50-2T2,5 C: 04 CH50-2T2,5 p 30 p 44 Mekano 60-2 Vertical Mekano 60-2 Horizontal U: 13 CH60-2 C: 05 CH60-2 T: 02 CH60-2 p 31 p 45 p 51 Mekano 100-2T3 Vertical Mekano 100-2T3 Horizontal U: 15 CH100-2T3 L: 03 CH100-2T3 C: 07 CH100-2T3 T: 04 CH100-2T3 p 33 p 38 p 47 p 53 Mekano 100-3 Vertical Mekano 100-3 Horizontal U: 14 L: 02 CH100-3-2,5 CH100-3-2,5 C: 06 CH100-3-2,5 T: 03 CH100-3 p 32 p 37 p 46 p 52 Mekano 100-4 Vertical Mekano 100-4 Horizontal U: 16 CH100-4-3 U: 17 CH100-4-5 p 34 p 35 L: 04 CH100-4-3 C: 08 CH100-4-3 L: 05 CH100-4-5 C: 09 p 30 p 40 CH100-4-5 p 48 p 49 T: 05 CH100-4-3 p 54 p 55 T: 06 CH100-4-5 18

U-SUPPORT: CH 50-2 -1,5mm MG-U: 01 A) S-M WB-200-CH50-2 1.5 mm Height B) C) D) Width Items list: Function Type (mm) Weight (kg) Art # HDG Art # SS # of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2 (*kg/m) 1,5 1,7* 1302506 1371689 1 C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2 (vertical) & CH 50-2 (horizontal) Height(mm) Width(mm) Capacity Capacity 1000 250 5.5 1.8 1000 500 3.2 1.1 1000 750 2.3 0.8 1000 1000 1.8 0.6 1000 1250 1.5 0.5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH50-2-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 19

U-SUPPORT: CH 50-2-1,5mm & CH100-1-1,5mm MG-U: 02 A) S-M WB-200-CH50-2 1.5 mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2(*kg/m) 1,5 1,7* 1302506 1371689 1 C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 12 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2 (v) & CH 100-1 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 13.4 4.5 1000 500 8.8 2.9 1000 750 6.4 2.1 1000 1000 4.4 1.5 1000 1250 4.2 1.4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 20

U-SUPPORT: CH 50-2T-1,5mm MG-U: 03 A) S-M WB-200-CH50-2 1.5 mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* 1372186 1372181 1 C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 50-2T1,5 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 5.5 1.8 1000 500 3.2 1.1 1000 750 2.3 0.8 1000 1000 1.8 0.6 1000 1250 1.5 0.5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH50-2T-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 21

U-SUPPORT: CH 50-2T-2mm MG-U: 04 A) S-M WB-200-CH50-2 2 mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,8* 1372187 1372182 1 C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T2 (v) & CH 50-2T2 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 7.3 2.4 1000 500 4.7 1.6 1000 750 3.5 1.2 1000 1000 2.8 0.9 1000 1250 2 0.7 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH50-2T-2 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 22

U-SUPPORT: CH 50-2T-1,5mm & CH100-1-1,5mm MG-U: 05 A) S-M WB-200-CH50-2 1.5 mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* 1372186 1372181 1 C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 12 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 13.4 4.5 1000 500 8.8 2.9 1000 750 6.4 2.1 1000 1000 4.4 1.5 1000 1250 4.2 1.4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 23

U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 06 A) S-M WB-200-CH50-2 2 mm Height B) C) D) 1,5 mm Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1 C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 12 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 13,5 4,5 1000 500 9 3 1000 750 6,6 2,2 1000 1000 5,3 2,4 1000 1250 4,5 1,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 24

U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 07 A) H1 2 mm 1,5 mm S-M WB-200-CH50-2 Height B) C) H1 D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1 C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h) Height(mm) H1 Width(mm) Capacity Capacity 1000 250 13 4,3 1000 500 8,6 3,8 1000 750 6,2 2,0 1000 1000 4,2 1,4 1000 1250 4,0 1,3 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 25

U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 08 A) H1 2 mm 1,5 mm S-M WB-200-CH50-2 B) Height H1 C) H1 D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* 1372187 1372182 1 C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1(2) D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 20 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h) Height(mm) H1 Width(mm) Capacity Capacity 1000 250 12 4 1000 500 8 2,6 1000 750 6 2 1000 1000 4 1,3 1000 1250 3,5 1,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 26

U-SUPPORT: CH100-2T-2mm MG-U: 09 A) S-M WB-200-CH100-2T 2 mm Height B) C) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 2 B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* 1372189 1372184 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16 Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 22.5 7.5 1000 500 14.2 4.7 1000 750 10.5 3.5 1000 1000 8 2.7 1000 1250 7 2.3 1000 2000 4.7 1.5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 27

U-SUPPORT: CH100-2T-2mm MG-U: 10 A) H1 2 mm S-M WB-200-CH100-2T Height B) C) H1 Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 2 B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* 1372189 1372184 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 24 Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 21 7 1000 500 12,8 4,3 1000 750 9,4 3,4 1000 1000 7,4 2,4 1000 1250 6,2 2,1 1000 2000 4,0 1,3 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 28

U-SUPPORT: CH100-2T-2mm MG-U: 11 A) H1 2 mm S-M WB-200-CH100-2T Height H1 B) C) H1 Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 2 B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* 1372189 1372184 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 32 Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity Capacity 1000 250 19,6 6,5 1000 500 12,0 4,0 1000 750 8,8 2,9 1000 1000 7,0 2,3 1000 1250 5,8 1,9 1000 2000 3,1 1,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 29

U-SUPPORT: CH 50-2T-2,5mm MG-U: 12 A) S-M WB-200-CH50-2 2.5 mm Height B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH50-2T2,5 (*kg/m) 2,5 5,3* 1372188 1372183 1 C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T2,5 (v) & CH 50-2T2,5 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1000 250 8.5 3.8 1.1 10 3 1000 500 5 3.3 1 9 3 1000 750 3.6 2.5 0.8 8 3 1000 1000 2.8 2.2 0.66 5 3 1000 1250 2.4 1.8 0.54 4 2.5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation a P(y)=70% of capacity load is used to estimate max blast in x-direction. We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 30

U-SUPPORT: CH 60-2-6mm MG-U: 13 A) S-M WB-200-CH50-2 6 mm Height B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2 B) Mekano Channel S-M CH60-2 (*kg/m) 6 5,1* 1371432 1371430 1 C) Angle Bracket S-M AC CH60-2 4 1,7 1371436 1371435 4 D) Self Lock Boltset S-M LS-NU-M10x25 10 0,05 1371980 1371437 22 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 60-2(v) & CH 60-2(h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1000 250 15.5 4.6 1.38 8 7 1000 500 9 4.4 1.32 7 6 1000 750 6.5 3.8 1.14 7 6 1000 1000 5 3.3 0.99 5 6 1000 1250 4.2 2.8 0.69 3 6 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 31

U-SUPPORT: CH 100-3-2,5mm MG-U: 14 A) S-M WB-150-CH100-3 2,5 mm Height B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH100-3 4 1,2 1372514** 1372515 2 B) Mekano Channel S-M CH100-3 (*kg/m) 2,5 5,3* 1372504 1372505 1 C) Splice Connector L S-M SC-L-CH100-3 4 0,8 1372510 1372511 4 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 44 E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 2 **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel 100-3 & CH100-3 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1000 250 20.4 11 3.3 12 12 1000 500 18 11.4 3.5 11 12 1000 750 13.2 9.8 2.5 11 12 1000 1000 10.8 8.1 2.4 10 12 1000 1250 9 6.7 2.0 9 11 1000 2000 7 4.2 1.3 4 10 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 32

U-SUPPORT: CH 100-2T-3mm MG-U: 15 A) S-M WB-200-CH100-2T 3 mm Height B) C) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 2 B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* 1372190 1372185 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16 Load Capacity: Mekano Channel CH 100-2T3 & CH100-2T3 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1000 250 30 13.1 4.0 12 14 1000 500 20.3 12.5 3.8 14 15 1000 750 15.2 11.1 3.3 14 14 1000 1000 12.4 9 2.7 13 14 1000 1250 10.4 7.8 2.3 12 13 1000 2000 7.0 4.5 1.35 11 12 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 33

U-SUPPORT: CH 100-4-3mm MG-U: 18 A) Height 3 mm S-M WB-CH100-4 B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2 B) Mekano Channel S-M CH100-4-3 (*kg/m) 3 8,3* 1372525 1372526 1 C) Splice Connector L S-M SC-L-CH100-4 4 1,3 1372539 1372540 4 D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 32 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 100-4-3 & CH100-4-3 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1000 250 44 16 4.8 20 20 1000 500 36 20 6 25 25 1000 750 30 20 6 30 30 1000 1000 26 18 5.4 30 30 1000 1250 22 16 4.8 28 28 1000 2000 15 9 2.7 15 21 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 34

U-SUPPORT: CH 100-4-5mm MG-U: 19 A) Height 5 mm S-M WB-CH100-4 B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2 B) Mekano Channel S-M CH100-4-5 (*kg/m) 5 13,6* 1372530 1372531 1 C) Splice Connector L S-M SC-L-CH100-4 4 1,3 1372539 1372540 4 D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 32 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 100-4-5 & CH100-4-5 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1000 250 69 26 7.8 45 45 1000 500 57 32 9.6 50 45 1000 750 47 31 9.3 55 45 1000 1000 39 28 8.4 50 45 1000 1250 34 25 7.5 49 43 1000 2000 23 18 5.4 38 37 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 35

L-SUPPORT: CH100-2T-2mm MG-L: 01 A) S-M WS-300-CH100-2T 2 mm Height B) C) D) Items list: Width Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WS-300-CH100-2T 4 2,5 Contact us 1301061 1 B) Mekano Channel S-M CH1002T2 (*kg/m) 2 3,8* 1372189 1372184 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 10 D) Gusset Plate S-M GP-CH-100-2T 5 1,2 59507 59506 1 Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity DW Capacity 600 200 6,7 2,2 600 400 3,4 1,15 600 600 2,3 1,6 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 36

L-SUPPORT: CH 100-3-2,5mm MG-L: 02 A) S-M WB-150-CH100-3 2,5 mm Height B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH100-3 4 1,2 1372514** 1372515 1 B) Mekano Channel S-M CH100-3 (*kg/m) 2,5 5,7* 1372504 1372505 1 C) Splice Connector L S-M SC-L-CH100-3 4 0,8 1372510 1372511 2 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 44 E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 1 **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 600 200 10,8 4,0 1,6 12 6 600 400 6 2,7 0,9 8 5,4 600 600 3,3 1,7 0,6 5 5,4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 37

L-SUPPORT: CH100-2T-3mm MG-L: 03 A) S-M WB-300-CH100-2T 3 mm Height B) C) D) Items list: Width Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-300-CH100-2T 4 2,5 Contact us 1301061 1 B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* 1372190 1372185 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 10 D) Gusset Plate S-M GP-CH-100-2T 5 1,2 59507 59506 1 Mekano Channel CH100-2T3 (v) & CH100-2T3 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 600 200 10 4,1 1,3 6 7 600 400 5 2,6 0,85 4 6 600 600 3,5 1,7 0,55 3 6 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 38

L-SUPPORT: CH 100-4-3mm MG-L: 04 A) Height 3 mm S-M WB-CH100-4 B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 1 B) Mekano Channel S-M-CH100-4-3 (*kg/m) 3 8,5* 1372525 1372526 1 C) Splice Connector L S-M SC-L-CH100-4 4 1,3 1372539 1372540 2 D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 16 E) End Protection A-CH100-4 EP Plastic: PS60018 1 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 100-4-3 (v) & CH100-4-3 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 600 200 22 9 3 20 15 600 400 12 6 2 10 14 600 600 7 3,5 1,1 7 14 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 39

L-SUPPORT: CH 100-4-5mm MG-L: 05 A) Height 3 mm S-M WB-CH100-4 B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 1 B) Mekano Channel S-M CH100-4-5 (*kg/m) 3 13,7* 1372530 1372531 1 C) Splice Connector L S-M SC-L-CH100-4 4 1,3 1372539 1372540 2 D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 16 E) End Protection A-CH100-4 EP Plastic: PS60018 1 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 100-4-5 (v) & CH100-4-5 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 600 200 34 14 4,5 25 23 600 400 17 8 2,5 14 22 600 600 10,5 5,4 1,5 11 22 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 40

CANTILEVER SUPPORT: CH 50-2T-1,5mm MG-C: 01 A) S-M WB-200-CH50-2 B) C) Width 1.5 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1 B) Mekano Channel S-M CH50-2T (*kg/m) 1,5 1,4* 1372186 1372181 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 Lenght(mm) Capacity DW Piping 200 1,5 1 400 0,8 0,6 600 0,5 0,2 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 41

CANTILEVER SUPPORT: CH 50-2T-2mm MG-C: 02 A) B) S-M WB-200-CH50-2 C) Width 1.5 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1 B) Mekano Channel S-M CH50-2T2 (*kg/m) 2 1,7* 1372187 1372182 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T2 Lenght(mm) Capacity DW Piping 200 2,0 0,65 400 1,0 0,35 600 0,7 0,21 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 42

CANTILEVER SUPPORT: CH100-2T-2mm MG-C: 03 A) B) S-M WB-IN-225-CH100-2T C) Width 2 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-IN-225-CH100-2T 5 1,4 Contact us 1301059 1 B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* 1372189 1372184 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4 Load Capacity: Mekano Channel CH100-2T2 Lenght(mm) Capacity DW Piping 200 7,0 2,3 400 3,6 1,2 600 2,3 0,7 800 1,8 0,6 1000 1,4 0,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 43

CANTILEVER SUPPORT: CH50-2T-2,5mm MG-C: 04 S-M WB-200-CH50-2 A) B) C) Width 2.5 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1 B) Mekano Channel S-M CH50-2T2,5(*kg/m) 2,5 5,3* 1372188 1372183 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH50-2T2,5 Lenght(mm) Capacity DW Piping Piping Blast Blast 200 2,4 1,9 0,6 5,5 10,0 400 1,2 0,9 0,3 2,5 10,0 600 0,8 0,6 0,2 1,8 10,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 44

CANTILEVER SUPPORT: CH60-2-6mm MG-C: 05 S-M WB-200-CH50-2 A) B) C) Width 6 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1 B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH60-2 Width(mm) Capacity DW Piping Piping Blast Blast 200 4,4 3,4 1,1 10,5 10,0 400 2,2 1,7 0,6 5,5 10,0 600 1,5 1,1 0,4 3,5 10,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 45

CANTILEVER SUPPORT: CH100-3-2,5mm MG-C: 06 A) S-M WB-150-CH100-3 B) C) Width 2,5 mm D) Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH100-3 4 1,2 1372514** 1372515 1 B) Mekano Channel S-M CH100-3-2,5 (*kg/m) 2,5 5,7* 1372504 1372505 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 10 D) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 1 **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH100-3-2,5 Width(mm) Capacity DW Piping Piping Blast Blast 200 12,0 9,0 3,0 30 15 400 6,0 4,2 1,6 15 15 600 4,3 3,2 1,0 10 15 800 3,3 2,7 0,8 7,5 15 1000 2,2 2,0 0,7 6 15 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 46

CANTILEVER SUPPORT: CH100-2T-3mm MG-C: 07 S-M WB-IN-225-CH100-2T A) B) 3 mm C) Width 3 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-IN-225-CH100-2T 5 1,4 Contact us 1301059 1 B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 3,8* 1372190 1372185 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 4 Load Capacity: Mekano Channel CH100-2T3 Width(mm) Capacity DW Piping Piping Blast Blast 200 11,0 8,0 2,6 25,0 25,0 400 5,4 4,0 1,3 12,2 25,0 600 3,6 2,7 0,9 8,0 25,0 800 2,7 2,0 0,7 6,0 25,0 1000 2,1 1,6 0,6 5,0 25,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 47

CANTILEVER SUPPORT: CH100-4-3mm MG-C: 08 S-M WB-CH100-4 A) B) C) Width 3 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 6 3 1372606** 1372601 1 B) Mekano Channel S-M CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1 C) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 8 D) End Protection A-CH100-4 EP Plastic: PS60018 1 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH100-4-3 Width(mm) Capacity DW Piping Piping Blast Blast 200 11,0 8,0 2,6 25,0 25,0 400 5,4 4,0 1,3 12,2 25,0 600 3,6 2,7 0,9 8,0 25,0 800 2,7 2,0 0,7 6,0 25,0 1000 2,1 1,6 0,6 5,0 25,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 48

CANTILEVER SUPPORT: CH100-4-5mm MG-C: 09 S-M WB-CH100-4 A) B) C) Width 3 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 6 3 1372606** 1372601 1 B) Mekano Channel S-M CH100-4-5(*kg/m) 3 8,5* 1372530 1372531 1 C) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 8 D) End Protection A-CH100-4 EP Plastic: PS60018 1 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH100-4-5 Width(mm) Capacity DW Piping Piping Blast Blast 200 38,0 25,0 8,3 75,0 50,0 400 19,2 14,0 4,3 50,0 50,0 600 13,0 9,6 3,2 30,0 50,0 800 9,5 7,2 2,4 22,0 50,0 1000 7,6 5,8 1,8 18,0 50,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 49

T-SUPPORT: CH100-2T-2mm MG-T: 01 A) 2 mm S-M WB-200-CH100-2T B) Height C) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 1 B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* 1372189 1372184 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8 Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity DW Piping 600 200 3,10 1,0 600 400 2,30 0,7 600 600 1,60 0,5 600 800 1,20 0,4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Please note that the capacity calculation for T-support is for even loading on both sides. Max loads Y(KN) and X(KN) are non-concurrent loads. 50

T-SUPPORT: CH 60-2-6mm MG-T: 02 A) S-M WB-200-CH50-2 6 mm B) Height C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 1 B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1 C) Angle Bracket S-M AC CH60-2 4 1,7 1371436 1371435 2 D) Self Lock Boltset S-M LS-NU-M10x25 10 0,05 1371980 1371437 11 **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 60-2 & CH 60-2 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1500 300 3,00 2,10 0,70 6,00 2,20 1500 600 1,50 1,20 0,40 3,90 1,30 1500 900 1,00 0,75 0,25 2,40 0,90 1500 1200 0,75 0,50 0,13 1,80 0,60 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 51

T-SUPPORT: CH 100-3-2,5mm MG-T: 03 A) S-M WB-150-CH100-3 B) Height 2.5 mm C) D) E) Width Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH100-3 4 1,2 1372514** 1372515 1 B) Mekano Channel S-M CH100-3-2,5 (*kg/m) 2,5 5,7* 1372504 1372505 1 C) Splice Connector T S-M SC-T-CH100-3 4 1,1 80976 80470 2 D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 38 E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 2 **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1500 300 3,5 2,7 0,9 4,9 1,6 1500 600 3 2,5 0,8 4,9 1,6 1500 900 2,8 2,2 0,7 4,9 1,6 1500 1200 2,2 1,6 0,5 4,8 1,6 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 52

T-SUPPORT: CH100-2T-3mm MG-T: 04 A) B) 3 mm S-M WB-200-CH100-2T C) Height Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 1 B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* 1372190 1372185 1 C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 8 Mekano Channel CH100-2T3 (v) & CH100-2T3 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1500 300 4,9 4,7 1,4 7,5 2,5 1500 600 3,6 2,7 0,9 7,5 2,5 1500 900 2,4 1,8 0,6 6 2 1500 1200 1,8 1,3 0,43 4,5 1,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 53

T-SUPPORT: CH 100-4-3mm MG-T: 05 A) S-M WB-CH100-4 B) 3 mm C) D) Height E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 1 B) Mekano Channel S-M CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1 C) Splice Connector T S-M SC-T-CH100-4 6 1.2 1372542 1372543 2 D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 16 E) End Protection A-CH100-4 EP Plastic: PS60018 2 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 100-4-3 (v) & CH100-4-3 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1500 300 7,1 6 3 11 3,5 1500 600 6,9 6 3 11 3,5 1500 900 5,7 4,2 1,4 10,5 3,4 1500 1200 4,25 3,6 1,2 10,5 3,4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 54

T-SUPPORT: CH 100-4-5mm MG-T: 06 A) S-M WB-CH100-4 B) 3 mm C) D) Height E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 1 B) Mekano Channel S-M CH100-4-5(*kg/m) 3 13,7* 1372530 1372531 1 C) Splice Connector T S-M SC-T-CH100-4 6 1,2 1372542 1372543 2 D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 16 E) End Protection A-CH100-4 EP Plastic: PS60018 2 **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 100-4-5 (v) & CH100-4-5 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast 1500 300 11 9,9 3,3 17,5 6 1500 600 10,8 9,6 3,2 17,5 6 1500 900 8,6 6,6 2,3 17,5 6 1500 1200 6,5 4,9 1,6 16 5,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 55

Mekano 50-1 Mekano 50-2 Mekano 100-1 Order no. see also page 14 +15. HOT WORK Page 12 COLD WORK Page 14 Typical use for supporting E, I & T and HVAC 2 M10x20 40 Holes 11 x 35 55 55 Material thickness: 4 mm. Angle Bracket Fit all channels. See also page 64. HDG SS Weight Type Art. no. Art. no. SS (kg) S-M AB 55x55-10 1302494 1371712 0.1 4 M10x20 2(4) M10x20 200 40 Fits CH50-2 CH50-2T Fits CH50-1 Splice Connectors for channels For Mekano channel S-M CH50-2 and CH50-1 HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-CH50-2 84824 81992 0.4 S-M SC-CH50-1 1372763 1302595 0.3 Fits CH100-1 Splice Connectors for channels For Mekano channel S-M CH100-1 4(6-8) M10x20 Without notches. HDG SS Weight Type Art. no. Art. no. SS (kg) OE100 SC-NO 1371681 0,3 OE100 SC* 1371678 1371683 0.5 *) Without notches. 56

Mekano 50-2T Mekano 100-2T Mekano 125-2T NEW! New Channels triangle shaped channels in the marketplace. Mekano 50-2T and 100-2T are the first perforated Mekano 50-2T and 100-2T are lightweight channel system with improved load capacity and torsion strength. NEW: Mekano 125-2T is the newest addition to the patented family of triangular perforated channels. It is suitable for heavier loads and for piping. Please contact us for deals. Standard locking bolts M10x20 are to be used. The large holes on one side of the triangle make the channel easy to assemble, much like a regular angle channel. The Mekano 50-2T and 100-2T complete the MultiGrid system, offering even more opportunities in order to optimize our system to fit your requirements. Patented design Compare the load data for Mekano 50-2T and 100-2Twith other channels! Page 14-15. The large holes make it easy to bolt other parts to the channel. Two Mekano 100-2T: Because of the large holes the channels are easy to assemble. Nuts and bolts fit through slots for easy fastening 32 mm Ø 22 Mekano 50-2T bolted to Mekano 100-1. The bolts can be mounted from both sides. Mekano 100-2T bolted to Mekano 100-1. The bolts can be mounted from both sides. Use 1 part Splice Connectors for channel HDG SS Weight Type Art. no Art. no. SS (kg) S-M SC-100-5 1372535 1372534 1.2 57

Mekano 60-2 Order no. see page 15. Angle Connector HDG SS Weight Type Art. no. Art. no. SS (kg) S-M AC-CH60-2 1371436 1371435 0.33 Beam Clamp-set for Main & Secondary steel HDG SS Weight Type Art. no. Art. no. SS (kg) S-M BC-CH60-2 1371421 1371420 1.66 Slide-step 25mm to fit. Connection L60 to existing HE Main Steel (when drilling is prohibited) Preferred solution where the area directly underneath is occupied. Mekano 60-2 solutions on Ula (BP Norway) Mekano 60-2 solutions on Ula (BP Norway) 58

HOT WORK COLD WORK Mekano 60-2 & Details Page 12 Page 14 Connection L60 to Deck Stringers Connection L60 to RHS (when drilling is prohibited) Please ask for our MultiGrid Site Support Solution for Small Bore Pipes (Best Practice / Work Instruction) and our Pipe Support Standard Parts catalogue or download from www.oglaend-system.com 59

Mekano 100-3 Order no. see page 15. 8 M10x20 Supplied in pairs Splice Connectors for 100-3 HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-CH100-3 1372509 1372508 1.2 MultiGrid Bracing Equipment The unique flexibility in MultiGrid makes bracing a simple bolt job. Various standard brackets in combination with channels or threaded rods are tailored to fit the requirements. Ask for alternatives. Threaded Rod Type Art. no. SS S-M TR-06-1000 1900290 S-M TR-10-1000 1371416 HINGE OE100-HH Art. no. 1371680 SS Nyhamna Power Station Aukra, Norway In 2006 it was decided that Norwegian main grid owner Statnett was to build two gas turbine driven power plants on the north-west coast of Norway. The three production units were expected to produce 150 MW. Late 2007 Oglaend System was contacted by E&I Contractor Siemens Installation, and based on their sketch our R&D department developed a solution including MultiGrid support, cable ladders Type OE, trefoil cable cleats Type SmartCleat and earth links. The Mekano 100-3 channel along with accessories was the best choice for the 4.5 meter tall towers. The channels were easy to handle and assemble due to the light weight of the 2.5 mm thick non-magnetic AISI 316 L stainless steel. Even if none of the items exceeded the maximum man-handling weight of 25 kg the final construction was firm and strong. 60

HOT WORK COLD WORK Mekano 100-3 & Details Page 12 Page 14 200 Channel Bracket S-M CB-100-200 1372499 SS 1372498 HDG Max load 600 kg 350 Channel Bracket S-M CB-100-350 1372501 SS 1372500 HDG Max load 500 kg 500 Channel Bracket S-M CB-100-500 1372503 SS 1372502 HDG Max load 500 kg 215 90 Splice Connector L 4 mm S-M SC-L-CH100-3 1372511 SS 1372510 HDG Patented, study the Nonie principle below. 195 90 195 Splice Connector T 4mm S-M SC-T-CH100-3 80470 SS 80976 HDG 350 90 End Protection A-CH100-3 EP 1372507 SS 1372506 HDG Splice Connector U 4 mm S-M SC-U-CH100-3 1372513 SS 1372512 HDG 150 200 150 Goal post Bolted starter bracket S-M BS-CH100-3 1372492 SS 1372493 HDG The Nonie-principle = Enhanced Flexibility Oglaend System s patented Nonie-principle enables adjustments in step of 5 mm, utilizing the hole combinations between the Mekano Channel and the L-connector. The slots in combination with our self-lock bolt-sets ensure precise levels and eliminates risk of sliding. CH100-3 wth CC 25 mm against Splice L with CC 20mm bolt-holes = 5mm steps Square slots (10.3x10.3mm) for CH 100-3 CC 25 mm CC 100 CC 100 CC 20 CC 100 +10 mm +5 mm 0 mm 61

Mekano 100-4 Order no. see page 15. Splice Connector T Type: S-M SC-T-CH100-4 Art. No. 1372543 SS SNI 8 x M10x130mm Bracing Connector set for 15-60 Type: S-M SC-V-CH100-4-A Art.No. 1372546 SS SNI 4 x M10x130mm Plastic End Protection Type: A-CH100-4 EP Art. No. PS60018 How to cut Mekano CH 100-4 All cutting of profile Mekano 100-4 to be by 25mm steps. (L1 = Always ending with..00,-..25,-..50 or..75mm) Recommended exstra length for adjustments on site (dim. L): L = round up L1 ~ 25mm and add 25mm = L min. 25 to L max. 50mm. Mekano 100-4 Cut marking tool Measuring tool. Aid for cutting of Mekano 100-4. It is important that 90 cuts are done exactly between 2 holes. Cut tolerance: 25mm +0 / -1mm (both sides of cut) Type: S-M CD-CH100-4. 316L Art. No: 1372533 Example L1= 717mm = (717 + 25 ~ 25) = 750mm cut Length. - Result L = 33mm CC 25 mm Circle slots (Ø 10.3mm) for CH 100-4 Notches for positioning L L1 CC 20 NONIE = Simple flexibility. Study the Nonie principle on page 61. 62

HOT WORK COLD WORK Mekano 100-4 & Details Page 10 Page 12 Bracing Connector for 15-60 Type: S-M SC-V-CH100-4-B Art. No. 1372549 SS SNI 4 x M10x130mm Splice Connector Type: S-M SC-CH100-5 SS Art. No. SS 1372534 / HDG 1372535 Order two to splice one channel SNI 8 x M10x130mm Splice Connector L Type: S-M SC-L-CH100-4 316L Art.No. 1372540 HDG Art No. 1372539 (NA Stock) Patented, study the Nonie principle page 61. SNI 8 x M10x130mm Bolted Main Steel connection Range: HE240A/B HE1000A/B Fit all sizes from HE240A/B to HE1000A/B (& similar beam with 240-300mm flange-width) Splice Connectors for channel HDG SS Weight Type Art. no Art. no. SS (kg) S-M SC-CH100-5 1372535 1372534 1.2 To splice connect CH100-4 use 8 through bolts. Type: S-M HE-NU-M10x130. Art. no.: 1372950 as bolt set with nut. Bolted Starter Type: BC-MS-CH100-4 316L Art. No. 1372520 Shim plates setup: 20mm = mm shim-plates needed. (Shim Size: 2 a 3, 2 & 1mm) SNI 6 x M16x65 (HE240B) Bolts 6 x M16x65 Mekano CH 100-4 as alternative starter between stringers Step 1. Plates (110x110x6mm x 2 ) to be welded to stringer. Step 2. CH 100-4 to be placed and welded to plates. Step 3. Apply masking tape. (Not covering welds!) Minimum clearence 25mm Adjustable by 5mm step sideways 63

MultiGrid : Electro, Instrumentation & Telecom Various Angle Brackets fits all channels Also see page 66. Other Fixing Clamps for Ladders and Trays see our product catalogues. Traverse Support Fixed back to back with two bolts M10 giving shear strength pr. bolt: 2000kg 55 Holes 11 x 35 40 Fits all 11x35 40 11x35 6x35 Single Kg Safetyfactor = 2 Double 55 40 Material thickness: 4 mm. 33 23 Material thickness: 3 mm. Fixing Clamps For fastening ladders to brackets and supports. Gives a safe earth connection between ladder and bracket. Type HDG SS Weight Art. no. Art. no. SS (kg) S-M AB 55x55-10 1302494 1371712 0.11 OE-FC-A40x33-10/10 89908 89907 0.14 OE-FC-A40x23-10/6 89917 89916 0.05 Fits all Material thickness: 3 mm. Fixing Clamp for channel-traverse. Supplied in pairs. HDG SS Weight Type Art. no. Art. no. SS (kg) OE FC-CHM10 1302482 1371705 0.3 11x35 Fixing Clamp for traverse channels HDG SS Weight Type Art. no. Art. no. SS (kg) S-M FC-CH 1302483 1302598 0.07 How to use: Fits both Mekano and UNO L H 64 Channel Bracket for LOE, RZE ladders and SPB trays. Type no. indicates ladder width. Safety factor 2. HDG SS Maks last Weight Type H + L Art. no. Art. no. Max. load SS S-M CB-30-100 38 + 129 1302437 1371791 180 kg 0.36 kg S-M CB-30-150 38 + 179 1302438 1371792 180 kg 0.42 kg S-M CB-30-200 38 + 229 1302439 1371793 200 kg 0.48 kg S-M CB-30-300 50 + 329 1302440 1371794 200 kg 0.67 kg S-M CB-30-400 50 + 429 1302441 1371799 200 kg 0.81 kg

Choose channels according to the required load capacity. SC-TW 40/390 SC-TW 90/213 SC-TW 40/290 213 290 390 Directional adjustors 4 mm 5 mm HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-TW 90/213 1302515 1371700 0.5 S-M SC-TW 40/290 1302517 1371702 0.4 S-M SC-TW 40/390 84167 84168 0.6 Channel Bracket Twisted HDG SS Weight Type Art. no. Art. no. SS (kg) S-SPB CB-TW 1302172 1371818 0.27 Gives a clean and professional installation with no descenders. Fits all Mekano Channels. 11x11 7x7 97 177 Interface between tray and OE-ladder HDG SS Weight Type Art. no. Art. no. SS (kg) S-OE/SPB-RF-IF-97 85082 0.04 S-OE/SPB-RF-IF-177 60381 0.06 65

Angle Brackets Fit all channels HDG SS Weight Type Art. no. Art. no. SS (kg) 1 M6x12 Material thickness: 5 mm. 25 Holes 11 x 20 7 x 22 50 50 30 Holes 7 x 30 52 52 S-M AB 50x50-10/6 1372761 1371817 0.1 S-M AB 50x50-6 83410 84386 0.1 Material thickness: 4 mm. 1 M6x12 +1 M10x20 Material thickness: 4 mm. 40 Holes 11 x 35 7 x 20 55 55 S-M AB 55x55-10/6 1302170 1371816 0.2 2 M10x20 Material thickness: 4 mm. 40 Holes 11 x 35 55 55 S-M AB 55x55-10 1302494 1371712 0.2 Material thickness: 5 mm. 40 65 2 M10x20 Holes 11 x 35 13 x 25 80 S-M AB 65x80-10/12 1372759 1371713 0.2 60 65 Material thickness: 5 mm. 2 M10x20 Holes 11 x 35 13 x 24 80 S-M AB 65x80-10/12B 1372762 1371714 0.3 60 65 2 M10x20 Material thickness: 5 mm. Holes 13 x 25 11 x 35 65 60 S-M AB 65x60-Z 1302501 1371715 0.3 2 M6x12 2 M10x20 Material thickness: 5 mm. To combine 6 and 10mm bolts. 50 Holes 11 x 20 7 x 20 Ø 11 115 125 S-M AB 110x120-10/6 1302503 1371717 0.5 3 M10x20 Material thickness: 5 mm. 60 14 x 25 11 x 25 50 80 60 End piece for Channel S-M CH100-1-3000 HDG SS Weight Type Art. no. Art. no. SS (kg) S-M AB 60x60-10/12 1302502 1371716 0.3 66

Miscellaneous Items 2 M10x20 2 M6x12 5 mm material 11 x 20 11 x 35 7 x 20 40 A B 40 62 A: Cantilever Arm for 100 mm tray B: Channel Bracket for 100 mm tray HDG SS AL Weight Type Art. no. Art. no. Art. no. SS (kg) S-SPB CA-100 1302320 1302323 0.4 kg S-SPB CB-100 1302216 1302218 0.3 kg 2(4) M6x12 B B Tray Wall SHS SPB Wall Support Bracket Type states tray width B and type SHS it will fit using a square U-bolt. See page 79 ordering U-bolts. SHS: Square Hollow Section. Can also be mounted directly to a wall. HDG SS Weight Type Fits SHS Art. no. Art. no. SS (kg) S-SPB SB-85-SHS-50 1302150 1371795 0.12 S-SPB SB-111-SHS-80* 1302154 1371800 0.15 S-SPB SB-135-SHS-100 1302151 1371796 0.18 S-SPB SB-155-SHS-120 1302152 1371797 0.40 S-SPB SB-175-SHS-140 1302153 1371798 0.45 *) Fits tray width 100-150 2 M6x12 100 11 x 20 200 105 7 x 30 30 90 65 Tray Bracket for SPBE/SPB-RF-100 HDG SS AL Weight Type Art. no. Art. no. Art. no. SS S-SPB SB-STUD 1372902 1372903 L Ø Earth Link Jumpers Art. L Ø Type no. Length mm Screw mm 2 A-M EL-100/6-4 85813 100 6 4 A-M EL-100/6-6 85814 100 6 6 A-M EL-100/10-10 85815 100 10 10 A-M EL-300/10-10 85816 300 10 10 A-M EL-100/10-16 85817 100 10 16 A-M EL-300/10-16 85818 300 10 16 Other dimensions on request. Welding zone to be repainted Ø 13 T = 5mm 75 75 50 50 M12 Earthing Boss CS SS SS Type Art.no. Art.no. Weight A-M EB-EL-50x50x12 83427 83428 0.8 kg Earthing Lug SS SS Type Art.no. Weight A-M WB-EL 87640 0.2 kg Holes 11 x 35 50 90 225 119 119 109 109 119 mm 119 mm 35 15 35 35 15 50 77 67 50 90 50 90 30 45 Holes 11 x 35 Holes 11 x 35 50 90 50 90 Cross section 60 Holes 11 x 35 50 90 2(4-8) M10x20 Fits CH100-1 SPLICE ANGLE VERTICAL Holes 11 x 35 OE100 SA-VE 50 90 225 Splice Connectors for channels For Mekano channel S-M CH100-1 HDG SS Weight Type Art. no. Art. no. SS (kg) OE100 SA-VE 1302493 1371711 0.8 4(6-8) M10x20 Fits CH100-1 SPLICE ANGLE HORIZONTAL 11 x 35 35 50 77 Splice Connectors for channels For Mekano channel S-M CH100-1 HDG SS Weight Type Art. no. Art. no. SS (kg) OE100 SA-HO 1302534 1371682 0.7

FOR COLD WORK Y Load 350 kg M 10 25/35 For various tasks and for combination with channels 19 M6/M10 4 Beam Clamp Tapered M10 screw included SS Max Weigth Type Art. no. load (kg) SS (kg) S-M BC-U-25/6 1371801 350 S-M BC-U-25/10 1371802 350 S-M BC-U-35/10 1371803 350 Pressure Plate (sleeve) on request. Type: S-M BC-U-PP Art. no. 1371804 D min/max D max D min 48 Press Clamp for Beam Clamp Supplied in pairs. Materialtykkelse HDG SS Type Material thickness Art. no. Art. no. S-M BC-FC 4 mm 85196 85197 24 A Beam Clamp Maks. belastning / Max. load weight = 800 kg. A For D HDG SS Type mm min/max Art. no. Art. no. mm S-M BC-160 260 88-160 85621 85622 S-M BC-300 390 102-300 85623 85624 Y Load 600 kg Y Load 350 kg Beam Clamp for Stringer HDG SS Max Type Art. no. Art. no. Load (kg) S-M BC-ST-HD 86889 86877 350 Pressure Plate (sleeve) on request. Type: S-M BC-U-PP Art. no. 1371804 Y Load 1000 kg 68 D min/max Beam Clamp for Beam Traverse HDG SS Type Art. no. Art. no. S-M BC-CH100-3 1372490 1372491 Beam Traverse For D HDG SS Max Type min/max Art. no. Art. no. Load (kg) mm S-M BT-CH100-3 100-350 1372494 1372495 1000 Channel Angle For directional adjustment (t = 3mm) HDG SS Max Type Art. no. Art. no. Load (kg) S-M MG-CA 80926 1372497 1000

MultiGrid offers you the freedom in choice of discipline support Please study the catalogue range page 2. Contact us or simply download on: www.oglaend-system.com 69

MultiGrid : HVAC Prepared for circular channels. Prepared for square channels. Note the different use of the plastic pad. Universal Strap-Bracket A pair of brackets and levasint coated cable ties are all you need to fix both square and circular HVAC pipes of all sizes to the support system. Plastic pads insulate against both noise and corrosion. SS Weight Type Art. no. SS A-H HC-UN 1302393 0.5 kg Plastic pad: Art. no.: 1302394 Levasint coated cable ties: Use for example 19mm Band-it AE-416/ AE-436 and the lock AE 456 HVAC Clamps When ordering, add H = Outside duct diameter + insulation if relevant. HVAC clamp is supplied for duct dimensions from 160-850 mm / perforated 125-800mm. SS Weight Type (H) Art. no. SS (kg) A-H HC-LI-125 87613 0.2 A-H HC-LI-160 87614 0.3 A-H HC-LI-180 87615 0.3 A-H HC-LI-200 87616 0.3 A-H HC-LI-230 87617 0.4 A-H HC-LI-250 87618 0.4 A-H HC-LI-315 87619 0.5 A-H HC-LI-400 87620 0.6 A-H HC-LI-500 87621 1.0 A-H HC-LI-600 87622 1.2 A-H HC-LI-630 87877 1.2 A-H HC-LI-800 87623 1.5 HDG SS Weight Type (H) Art. no. Art. no. SS (kg) A-H HC-160 79167 79168 0.6 A-H HC-200 78684 78689 0.7 A-H HC-250 78685 78690 0.8 A-H HC-315 78686 78691 1.1 A-H HC-355 78703 78707 1.2 A-H HC-400 78687 78692 1.3 A-H HC-450 78704 78708 1.5 A-H HC-500 78688 78693 16 A-H HC-600 78705 78709 1.6 A-H HC-850 78706 78710 2.7 70

Based on our standard MultiGrid details we offer custom made HVAC solutions Choose channels according to the required load capacity. Optimised use of Mekano channels give minimum weight and cost. I.V.A.R. waste water plant in Mekjarvik, Randaberg 71

MultiGrid Pipe Support Standard Details Clamped Shoe (2) Adjustable Type: OPS-SD PS02 Range Pipe 2 8 HDG 355 & SS 316L Please ask for our MultiGrid Pipe Support Standard Parts Catalogue Bolted Line Guide/ Hold down (LG & HD) Type: OPS-SD LG05 Range: Pipe Shoes 2 8 HDG 355 & SS 316L Bolted Line Guide/ Hold down Type: OPS-SD PG01 Range: Pipe Shoes 2 8 HDG 355 & SS 316L Clamped Shoe (2) Type: OPS-SD PS05 Range Pipe 2 8 HDG 355 & SS 316L U-BOLTS ordering list: Type/ For Ø Art. no. dim: mm: HDG SS 1 /2 M6 23 1302347 1302403 1 /2 M8 23 1302348 1302404 3 /4 M8 28 1302349 1302405 3 /4 M10 28 1302350 1302396 1 M8 36 1302351 1302406 1 1 /4 M10 44 1302352 1302407 1 1 /2 M10 50 1302353 1302408 Type/ For Ø Art. no. dim: mm: HDG SS 2 M10 62 1302354 1302409 2 M12 62 1302355 1302410 2 1 /2 M10 78 1302356 1302411 2 1 /2 M12 78 1302357 1302412 3 M12 91 1302358 1302413 3 1 /2 M12 102 1302359 1302414 4 M12 117 1302360 1302415 OPS SD-PC13 Pipe Clamp With Adjustable Bolted Bracket Pipe Clamp Perforated and Adjustable Type: OPS-SD PC13 Range Pipe 1/2 2 HDG 355 & SS 316L 72 Slide or/and rotate 180 to fit 25mm perforated angle. Sleeves to be removed for Grip function (pre-set Non-Grip) Adjustable to fit 25mm vertical - Perforated angle. Pre-set hight = 100mm (range = +25/ -15mm) NOTE: Req. bolt torque for M10 Self-Lock nuts = 30Nm Pipe Clamps perforated and adjustable Dim. ID Clamps HDG SS Weight Type inch mm Art.no. Art.no. SS (kg) OPS SD-PC13-015 1/2 141 PS43755 PS43750 0.7 OPS SD-PC13-020 3/4 170 PS43756 PS43751 0.7 OPS SD-PC13-025 1 222 PS43757 PS43752 0.8 OPS SD-PC13-030 1 1 /4 222 PS43758 PS43753 0.8 OPS SD-PC13-040 1 1 /2 222 PS43759 PS43754 0.8 OPS SD-PC13-050 2 222 PS43761 PS43760 0.9

U-Strap Non-Grip Type: OPS-SD PC01 Range Pipe 2 8 HDG 355 & SS 316L U-Strap Grip Type: OPS-SD PC02 Range Pipe 2 8 HDG 355 & SS 316L U-Bolt Grip (Vibro-damping) Type: OPS-SD PC05 Range Pipe 1/2 8 HDG 355 & SS 316L U-Bolt Non-Grip (Vibro-damping) Type: OPS-SD PC06 Range Pipe 1/2 8 HDG 355 & SS 316L MultiGrid Adapter U-Bolt & U-Strap Type: OPS-SD AD01-A Range: U-Bolt 1/2 2 Range : U-Strap 6 & 8 HDG 355 & SS 316L MultiGrid U-Strap Adapter Type: OPS-SD AD01-B Range : U-Strap 2 & 5 HDG 355 & SS 316L U-Bolt Grip Type: OPS-SD PC04 Range Pipe 1/2 8 HDG 355 & SS 316L U-Bolt Non-Grip Type: OPS-SD PC03 Range Pipe 1/2 8 HDG 355 & SS 316L U-Bolt and U-Strap Adapters HDG SS Weight Type Art. no. Art. no. SS (kg) OPS SD-AD01-A PS60053 PS60051 0,3 OPS SD-AD01-B PS60052 PS60050 0,8 B Type: OPS-SD PC23 with 50mm longer base plate Type: OPS-SD PC21 with 50mm longer base plate Pipe Clamp With Perforatet Base Plate Type: OPS-SD PC23 Range Pipe 3 4 HDG 355 & SS 316L Pipe Clamp with Perforatet Base Plate Type: OPS SD-PC21 Range Pipe 1/2 2. HDG 355 & SS 316L Pipe Clamps for stdr. ST-pipes. For Cu/Ni on request. Dim. B HDG SS Weight Type inch mm Art. no. Art. no. SS (kg) OPS SD-PC21-015 1/2 30 PS44105 PS44100 0,5 OPS SD-PC21-020 3/4 30 PS44106 PS44101 0,5 OPS SD-PC21-025 1 30 PS44107 PS44102 0,6 OPS SD-PC21-030 1 1 /4 30 PS44108 PS44103 0,6 OPS SD-PC21-040 1 1 /2 30 PS44109 PS44104 0,7 OPS SD-PC21-50 2 30 PS44111 PS44110 0,8 OPS SD-PC23-050 2 30 PS43905 PS43900 OPS SD-PC23-065 2 1 /2 30 PS43906 PS43901 OPS SD-PC23-080 3 30 PS43907 PS43902 1,2 OPS SD-PC23-090 3 1 /2 30 PS43908 PS43903 1,5 OPS SD-PC23-100 4 30 PS43909 PS43904 1,8 73

Oglaend System have commissioned Aveva to produce our Cable Tray, Ladder and Supports catalogue within their PDMS format. This has been done to ensure that our equipment codes are produced in a way that is fully compatible with PDMS and that Aveva will fully support the software with their existing client base. Our Supports, Cable Trays and Ladders can be downloaded from our web page. SmartPlant 3D and PDS SmartPlant 3D is an advanced plant design software and Intergraph Process, Power & Marine s next-generation, datacentric, rule-driven solution for streamlining engineering design processes while preserving existing data and making it more usable/re-usable. A fundamental component of Intergraph s SmartPlant Enterprise, SmartPlant 3D is a complementary, full-suite solution that provides all the capabilities needed to design a plant, and then keep it as-built throughout its life cycle. Intergraph PDS is a comprehensive, intelligent computer-aided design/engineering (CAD/CAE) application. Production-driven, PDS delivers the best design possible - and does it more efficiently to reduce the total installed cost of the project. It enhances value and minimizes risk while preserving the value of data. Intergraph PDS provides seamless integration with the design tools and catalogues of Oglaend System. Contact us for SP3D and PDS catalogue. 74 www.oglaend-system.com

MultiGrid : Ships Flexible Support Plan and a Simplified support plan Use our low weight versatile Mekano Channels instead of the heavy welded traditional solutions. For full range Please ask for our catalogue; Cable Ladders and Accessories for Ships or download from www.oglaend-system.com Flexible support plan Only the welding channels are fixed in the construction yard by the fabricator. Then the installation contractor can fit the equipment without need of repainting. The channels provide multiple fixing points for cable ladders and small pipes, and also function as stiffeners for the stringers. The flexibility makes it easy to install and adjust E, I&T and piping, making this a very cost efficient solution. Simplified support plan Only the welding brackets are installed by the fabricator. Then the installation contractor can fit the equipment without need of repainting. The brackets combined with channels give fixing points for cable ladders and small pipes throughout the equipment route. 75

Multidiscipline support system for concrete constructions FOR COLD WORK Cast the Concrete Insert Rail into the concrete construction for full Multidiscipline Support. Additional concrete clamps for all our Mekano Channels and Support Equipment complete the MultiGrid system. Concrete Insert Rail as MultiGrid Ceiling on Ormen Lange. Please ask for our special folder describing the use of our Insert Rail Order Code for Concrete Insert Rail: Foam included. Type states length in mm HDG SS Type: Art. no. Art. no. S-M CIC-V-50-1-3000 1303393 1303390 S-M CIC-V-50-1-2500 1303394 1303391 S-M CIC-V-50-1-1250 1303395 1303392 Nail plate: S-M CIC-V-FC 79717C Nail box 500 pcs.:s-m CIC-V-NA 79717H T-bolt M10x30: S-M CIC-V-TS 80911 80910 76

Fixing brackets for concrete Choose starters according to the required load capacity. Ceiling Bracket for single or double CH100-1 For order details and load capacities see page 12-13. Also study Angle Brackets on page 68. Ceiling Bracket (B) for Concrete or steel. Ceiling Bracket for Concrete Insert Rail. HDG SS Max. Weight Type L Art. no. Art. no. load (kg) SS (kg) S-M BS-CH50-2 80134 80133 1000 0.5 S-M BS-125-CH50-2T (B) 1303397 1303396 1000 0,5 Safety factor 2. Page 81 Fix with: 1 bolt max Ø 12mm L = Type length + 40mm Cantilever Arm for LOE, RZE ladders and SPB trays. Type states width. Safety factor 2. HDG SS Maks last Weight Type L Art. no. Art. no. Max. load (kg) SS (kg) S-M CA-35-100 1372689 1302442 350 0,4 S-M CA-35-200 1372690 1302443 250 0,5 S-M CA-35-300 1372691 1302444 200 0,6 S-M CA-35-400 1372692 1302445 175 0,8 S-M CA-35-500 1372693 1302446 150 0,9 S-M CA-35-600 1372694 1302447 125 1,1 Fix with: 1 bolt max Ø 12mm 12.5 x 25 Page 81 Holes: 7 x 20 9 x 30 L L c/c 53 94 Cantilever Arm for LOE, RZE ladders and SPB trays. Type states ladder width. Safety factor 2. HDG SS Max. Weight Type L Art. no. Art. no. load (kg) SS (kg) S-M CA-30-100 86275 86270 150 0.35 S-M CA-30-150 86276 86271 100 0.42 S-M CA-30-200 86277 86272 80 0.48 S-M CA-30-300 86278 86273 60 0.67 S-M CA-30-400 86279 86274 50 0.81 L = Type length + 29mm For wider ladders and trays we recommend U-frames. Choose starters according to the required load capacity. 77

Multidiscipline support system in FRP Oglaend System s enhanced FRP system consists of a multidicipline heavy duty support system and a full range of cable trays and cable ladders. All made from Fiber Reinforced Plastic. FRP CABLE LADDERS, TRAYS AND SUPPORT SYSTEM Ask for our special catalogue! ISO 9001 2008 CERTIFIED Being first is good, being smart is better, being both is Simply the Best! The FRP Support System is simple, smart and fast, whatever solution you require A light-weight Multidiscipline support system Corrosion resistant Simple hand tools used for cutting and drilling Modifications are easily done on site Our FRP support system with ladders and trays installed in a highly corrosive environment at the Elkem Solar Silicium production facilities in Norway. 78

Miscellaneous products: Type UNO Ask for special catalogue A complete range of UNO support channels and accessories along with best practice examples. RHS U-bolts for UNO: Ordering list in the UNO catalogue UNO channel fixed to RHS 80 with Square U- bolt type M8-RHS-80. The UNO channels support equipment plate and cable tray. Cantilever console fixed to RHS with UNO 3-hole brackets and Square U- bolts. Square U- bolts used to fix weather house bracket. Square U-bolt for RHS beams ordering list: SS Type states dim. Bolt/RHS Art. no. S-M UB-SQ-M8-SHS-50 1372590 S-M UB-SQ-M8-SHS-80 1372591 S-M UB-SQ-M8-SHS-100 1372592 S-M UB-SQ-M10-SHS-120 1372593 S-M UB-SQ-M10-SHS-140 1372594 M10 supplies from stock. The white hook is approved by DNV Constructed to support loads from all kinds of cables. Made of synthetic, none conductive material. Available in three different sizes: Safety hook (Temporary solution) Type (white) Safe (kg) Approved by DNV Art. no. Length Working Load Weight A-M HT-6 1372893 160mm (6 ) 60 A-M HT-9 1372894 230mm (9 ) 55 A-M HT-12 1372895 310mm(12 ) 190 Type (LI=green) Light version is not approved by DNV. For some less load. A-M HT-LI-6 80902 160mm (6 ) A-M HT-LI-9 80903 230mm (9 ) A-M HT-LI-12 80904 310mm(12 ) 79

Self-Lock System includes Vibration-proof fasteners SELF-LOCKING BOLT SETS with pan head and flange nuts Self-Lock system is supplied in stainless steel. Other bolts & fixing items see below and next page. Old-fashioned: The nut is moveable during vibrations bacause of sidewards thread gap. Self-Lock Nut details (A4-80) Descrition Height Key size Torque STD SS Type (mm) (mm) (Nm) Packs Art. no. DIN 6923 S-M NU-FL-M6 5,8 10 8-10 200 1371971 DIN 6923 S-M NU-FL-M8 7,9 13 20-23 200 1371972 DIN 6923 S-M NU-FL-M10 9,6 15 40-45 200 1371973 DIN 6923 S-M NU-FL-M12 11,8 18 80-85 200 1371343 Standard Nut details (A4-80) Descrition Height Key size Torque STD SS Type (mm) (mm) (Nm) Packs Art. no. DIN 934 S-M NU-M6 4,8 10 6-7 200 1372781 DIN 934 S-M NU-M8 6,4 13 15-17 200 1371340 DIN 934 S-M NU-M10 7,9 17 30-33 200 1371341 DIN 934 S-M NU-M12 10 19 60-62 200 1371342 New standard: The nut is locked during vibrations because all thread contact stops sidewards movement. Self-Lock, a unique pretension thread locking system. Ask for separate brochure. Bolt details for Mekano 60-2 system (Channel S-M CH60-2) SS Description Type Art. no. M10x25mm locking bolts A4 DIN 603 S-M LS-M10x25 84352 M10x30mm locking bolts A4 DIN 603 S-M LS-M10x30 89821 M10x35mm locking bolts A4 DIN 603 S-M LS-M10x35 82709 M10x50mm locking bolts A4 DIN 603 S-M LS-M10x50 89822 M10x70mm locking bolts A4 DIN 603 S-M LS-M10x70 81396 M10x1000mm Threaded rod A4-80 DIN 975 S-M TR-M10x1000 87995 M10 Self-Lock Nuts A4-80 DIN 6923 S-M NU-FL-M10 1371973 Various use: Dimensions M10 is for splice connections e.g.: Type: S-M SC-L-CH100-4 Use: 8 x M10x130mm Other dimensions is for various items e.g.: Type: BC-MS-CH100-4 Use: 6 x M16x65mm For Bracing Connection Type: S-M SC-V-CH100-4-A and S-M SC-V-CH100-4-B Use: 4 x M10x130mm for splice and 1 x M20x130mm for hinge function Bolt details for Mekano 100-4 system (Channel S-M CH100-4) SS Description Type Art. no. M10x130 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X130 1372950 M10x130 HEX Bolt A4 80 DIN 931 S-M HE-M10X130 1372572 M10x140 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X140 1372951 M10x140 HEX Bolt A4 80 DIN 931 S-M HE-M10X140 1372573 M10x150 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X150 1372952 M10x150 HEX Bolt A4 80 DIN 931 S-M HE-M10X150 1372574 M10x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M10X1000 1372953 M10x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M10X1000 87995 M10 Self-Lock Nut A4-80 (L=10mm) DIN 6923 S-M NU-FL-M10 1371973 M12x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M12X1000 1372954 M12x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M12X1000 87996 M12 Self-Lock Nut A4-80 (L=12mm) DIN 6923 S-M NU-FL-M12 1371343 M16x50 HEX Bolt-Set A4-80 S-M HE-NU-M16X50 1372970 M16x50 HEX Bolt A4 80 DIN 933 S-M HE-M16X50 1372926 M16x65 HEX Bolt-Set A4-80 S-M HE-NU-M16X65 1372971 M16x65 HEX Bolt A4 80 DIN 933 S-M HE-M16X65 1372927 M16x70 HEX Bolt-Set A4-80 S-M HE-NU-M16X70 1372972 M16x70 HEX Bolt A4 80 DIN 933 S-M HE-M16X70 1372928 M16x80 HEX Bolt-Set A4-80 S-M HE-NU-M16X80 1372973 M16x80 HEX Bolt A4 80 DIN 933 S-M HE-M16X80 1372929 M16x90 HEX Bolt-Set A4-80 S-M HE-NU-M16X90 1372974 M16x90 HEX Bolt A4 80 DIN 933 S-M HE-M16X90 1372930 M16 Full Metal Lock Nut A4-80 (L=13mm) DIN 980 S-M NU-FL-M16 1372969 M20x130 HEX Bolt-Set A4-80 S-M HE-NU-M20X130 1372975 M20x130 HEX Bolt A4 80 DIN 931 S-M HE-M20X130 1372580 M20 Full Metal Lock Nut A4-80 (L=16mm) DIN 980 S-M NU-FL-M20 1372581 80

81

PR = Primed HDG = Hot Dip Galvan AISI 316 (L) ALU = Aluminium Perforated Channels For other support of trays, ladders and electrical installations. Available in 3m lengths. 7 10 7 20 mm 15 35 7 mm 15 35 11 mm 30 30 11 mm 11 mm 7 10 7 16 mm Flat Iron Crosswise perforated PR HDG SS ALU Weight Type Art. no. Art. no. Art. no. Art. no. HDG (kg) Fl-CW-7x20-30x5x3000 1372104 1372130 2,6 Fl-CW-7x20-40x5x3000 1372105 1372131 3,8 Fl-CW-7x20-50x4x3000 1372101 1372103 4,0 Lengthwise perforated SS (kg) Fl-LW-7x35-25x5x3000 1372107 1372111 1371930 2,4 Fl-LW-7x35-30x5x3000 1372108 1372112 1371931 78173 3,0 Fl-LW-7x35-40x5x3000 1372109 1372113 1371932 78229 4,2 Fl-LW-7x35-50x5x3000 1372110 1372114 1371933 5,5 Fl-LW-11x35-40x5x3000 81477 81484 86858 3,9 Fl-LW-11x30-50x5x3000 81485 1371935 5,4 Fl-LW-11x30-40x6x3000 1371984 5,0 Fl-LW-11x30-40x8x3000 1372100 1372102 6,6 7 mm 11 mm 7 mm 11 mm 15 30 30 30 15 30 30 30 15 35 Angle Iron Crosswise perforated PR HDG SS ALU Weight Type Art. no. Art. no. Art. no. Art. no. HDG (kg) AI-CW-7x16-30x30x3x3000 1372132 1372134 1371942 78228 3,9 AI-CW-7x16-40x40x4x3000 1372133 1372140 1371943 6,9 Lengthwise perforated AI-LW-7x30-30x30x3x3000 1372115 1372117 1371939 3,9 AI-LW-7x30-40x40x4x3000 1372116 1372118 1371940 6,9 AI-LW-7x30-50x50x3x2000 78045 1,5* AI-LW-11x30-50x50x5x3000 1372119 1372120 1371941 10,7 Double lengthwise perforated AI-LW-7x30-40x40x4x3000 1371945 6,6 AI-LW-11x30-50x50x5x3000 78662 1371946 10,1 AI-LW-11x35-49x49x4x3000 88349 88348 7,4 AI-LW-7x35-49x49x4x3000 88347 88342 7,9 AI-LW-7x35/11x35-49x49x4x3000** 88346 88344 7,7 AI-LW-13x40-54x54x4x3000 88351 7,8 Predefined lengths up to 1,5m are supplied on request. *) Weight in ALU 11 mm Welding Channel for tubing clamps For quick and easy tubing installation with ETIN tubing clamp. Available in 3m lengths. PG HDG SS ALU Weight Type Art. no. Art. no. Art. no. Art. no. SS (kg/m) RZ- WB 78463 78497 1 28,5 25 25 7 82 15 5 35 36,5 15 35 50 15 50

LOCATIONS HOLDING COMPANY Øglænd Industrier AS P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 www.oglaend-system.com SUBSIDIARY Norway Øglænd System AS P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 Fax sales office: + 47 51 78 81 61 Email: oglaend@oglsys.no www.oglaend-system.com Denmark Øglænd System AS Tel.: +45 86 88 66 66 Fax: +45 86 88 66 67 Email: oglaend-system@oglsys.dk Dubai (Middle East) Oglaend Industries Middle East Tel.: + 971 4 887 8134 Fax: + 971 4 887 8143 Mobile: + 971 50 55 86 183 Email: sales@oglaend.ae Malaysia Oglaend Industries SDN BHD Tel.: + 60 3 51 922 049 Fax: + 60 3 51 922 039 Mobile: + 60 1 26 85 57 65 Email: sales@oglaendind.com fraser@oglaendind.com The Netherlands Oglaend System BV Tel.: + 31 1804 14 204 Fax: + 31 1804 19 395 Email: rfq@oglaend-system.nl China Oglaend Industries (Suzhou) Co., Ltd Tel.: + 86 512 62625453 Fax.:+ 86 512 62805553 Russia (St. Petersburg) Oglaend System Russia Tel.: +7(812) 313 1580 Fax: +7(812) 313 1580 Email: info@oglsys.ru www.oglaend-system.ru Singapore (South East Asia) Oglaend System Singapore Pte. Ltd. Tel.: + 65 67 48 82 78 Fax: + 65 67 48 86 15 Email: oglaend@oglsys.com Sweden Ögländ System AB Tel.: + 46 40 45 74 60 Fax: + 46 40 45 67 25 Email: oglaend-system@oglsys.se UK Oglaend System UK Ltd. Tel.: + 44 121 552 9662 Fax: + 44 121 544 6627 Email: oglaend.system@oglsys.co.uk USA Oglaend System USA Tel.: +1 832 288 4452 Email: sales@oglsys-us.com Korea Oglaend System Korea Co Ltd Tel.: + 82 518 320 761 Fax: + 82 518 320 762 Email: oglaend@oglaend-system.co.kr SALES OFFICES Norway Øglænd System AS, Division Oslo: Tel.:+ 47 22 25 15 10 Fax: + 47 22 25 25 21 Øglænd System AS, Division Ålesund: Tel.: + 47 70 19 09 50 Fax: + 47 70 19 09 51 Øglænd System AS, Division Trondheim: Tel.: + 47 73 80 99 70 Fax: + 47 73 80 99 77 AGENTS - DlSTRlBUTORS Abu Dhabi Proserv Albadie LLC Tel.: + 971 26 27 73 70 Fax: + 971 29 27 79 72 Email: proserv@emirates.net.ae www.proserv.no Australia J. T. Day Pty. Ltd. Tel.: + 61 8 9303 2248 Fax: + 61 8 9303 2446 Email: enquiries@jtday.com.au www.jtday.com.au Brazil M.O.TECH do Brazil Tel.: + 55 21 2532 2101 Fax: + 55 21 2517 2437 Email: motech@motech.com.br www.motech.com.br Brunei Shinba Integrated Engineering Services Tel.: + 673 333-1489 Fax: + 675 333-6333 Email: info@shinbaies.com Canada Source Energy Atlantic Tel.: + 1 (709) 739-8003 Fax: + 1 (709) 739-5973 Email: sales@sourceenergyatlantic.com NOSO Ltd. Tel.: + 1 709 782 2645 Fax: + 1 709 782 0534 Email: mshinkle@coil.ca www.noso.ca Finland Elmarino - Shipping OY Tel.: +358 22 54 61 00 Fax: +358 22 54 62 76 Iceland Smith & Norland Tel.: + 354 52 03 000 Fax: + 354 52 03 011 Email: sminor@sminor.is www.sminor.is lndonesia PT. Multi Tarex MuIia Tel.: + 62 21 3983 5337 Fax: + 62 21 3983 5340 Email: agus@multitarex.co.id www.multitarex.com Italy Piemme Broker S.R.L. Tel.:+39 02 906 33621 Fax +39 02 906 32036 Email: m.maiandi@pmbroker.it www.pmbroker.it Malaysia Offshore Industries Sdn Bhd Tel.: + 60 3-9284 0613 Fax: + 60 3-9284 1051 Email: oisbkl@tm.net.my Mexico Esteban De Leon Albaitero Tel.: + 52 (55) 2690 5963 E-mail: esteban.deleon@oglsys.com.mx MBP International Trade Inc. Tel.: + 52 155 40169985 E-mail : abello@mbptrading.com Thailand Probity International Co Ltd. Tel.: + 66 2 710 6146 Ext. 107 Fax: + 66 2 710 6147 Email: ak@probity.co.th www.probity.co.th The Baltic States Bastini OÜ Tel.: + 372 660 5811 Fax: + 372 660 5812 Email: sales@bastini.ee USA Source IEC Tel.: + 1 281 88 28 300 Fax: + 1 281 88 28 305 E-mail: sales@sourceiec.com Vietnam MT Corp. Tel.: + 848 821 0373 Fax: + 848 821 0358 Email: mail@mt-co.com Afrika - Agent Nigeria ZYCUS West Africa Ltd. Engineering & Procurement Solutions Tel. + 234 803 704 6242 E-mail u.ozoude@zwal.com.ng www.zwal.com.ng * X X * X HEAD OFFICE AND FACTORY SUBSIDIARIES AGENTS DISTRIBUTORS SALES OFFICES FABRICATION FACILITIES

SIMPLY THE BEST! This has been our motto since the company was founded in 1977. By living up to the motto we have become the market leader in our field worldwide. Oglaend System s goal is to develop systems that are better, simpler and more economic overall. Details may be subject to change without prior notice. Konsern/Holding company: Øglænd Industrier AS Datterselskap/Subsidiary: Øglænd System AS Hovedkontor fabrikk/head Office factory: P.O. box 133, N-4358 Kleppe, Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60 Fax sales office: +47 51 78 81 61 84 www.oglaend-system.com Email: oglaend@oglsys.no 01.15