Cooper & Turner Ltd STRUCTURAL
|
|
- Kristin Andrews
- 6 years ago
- Views:
Transcription
1 Cooper & Turner Ltd STRUCTURAL
2 Page 1 of 8 Dimensions of Fully Threaded Bolts/Setscrews Thread d M16 M20 M24 M30 M36 p (pitch) a max c max min da max dw min e min k nom max min r min s max min Dimensions are in millimetres and apply prior to coating. The table shows the popular dimensions, other diameters can be supplied provided the quantity required is sufficient to warrant manufacture. In addition, standard thread bolts in accordance with BS EN ISO 4014 may be supplied (see pages 3 & 4). IMPORTANT NOTE It is a requirement of BS EN that The bolt, nut and washer assembly is supplied by one manufacturer who is responsible for the function of the assembly. All the components are identified with the manufacturer s mark. The coating of the assembly is under the control of the manufacturer. BS EN Bolting Assemblies are not stock items and, therefore, Setscrews or Standard Thread Bolts may be supplied depending on availability CHARACTERISTIC STANDARD Fully Threaded Bolts / Setscrews General Requirements BS EN & 2 Threads ISO 965 / BS3643 tolerance class 6g Materials & Manufacture BS EN ISO Property Class 10.9 Mechanical Properties - Setscrews BS EN ISO Property Class 10.9 Mechanical Properties - Assemblies BS EN Dimensions & Tolerances BS EN ISO 4017 Finish/C oatings Self Colour/Black BS EN ISO as processed Hot Dip Galvanized BS EN ISO Product Marking BS EN ISO & BS EN Tolerance on nominal length for Fully Threaded Over Nominal length Bolts/Setscrews (mm) Up to and including CERTIFICATION Property Class 10.9 Fully Threaded Bolts/Setscrews are supplied with a Test Certificate. Tolerance (mm) ± ± ± ± ±2.3
3 Page 2 of 8 HEAD MARKING Setscrews & Standard Thread Bolts The actual arrangement and sizes of the markings may vary from that shown
4 Approved: D.Briggs Page 3 of 8 Dimensions of Standard Thread Bolts CHARACTERISTIC STANDARD b c Thread d M16 M20 M24 M30 M36 p (pitch) Bolt Bolt > Bolt > max min da max ds max min dw min e min k nom max min r min s max min Dimensions are in millimetres and apply prior to coating. The table shows the popular dimensions, other diameters can be supplied provided the quantity required is sufficient to warrant manufacture. Fully Threaded Bolts / Setscrews in accordance with BS EN ISO 4017 may be supplied (see pages 1 & 2). Standard Thread Bolts General Requirements BS EN & 2 Threads ISO 965 / BS3643 tolerance class 6g Materials & Manufacture BS EN ISO Property Class 10.9 Mechanical Properties - Setscrews BS EN ISO Property Class 10.9 Mechanical Properties - Assemblies BS EN Dimensions & Tolerances BS EN ISO 4014 Self Colour/Black BS EN ISO as processed Finish/C oatings Hot Dip Galvanized BS EN ISO Product Marking BS EN ISO & BS EN
5 Page 4 of 8
6 Page 5 of 8 Nominal Diameter & Thread Pitch Proof Load, Ultimate Tensile Load & Hardness of Bolts Stress Area Proof Load min Property Class 10.9 Tensile Load min Hardness Rockwell HRC mm² kn kn min max Bolt and Nut combinations supplied Bolt Property Class & Finish supplied with Nut Property Class & Finish Self Colour BS EN ISO 4032 PC 10 Self Colour Hot Dip Galvanized BS EN ISO 4033 PC 12 Hot Dip Galvanized M16 x M20 x M24 x M30 x M36 x
7 Page 6 of 8 DIMENSIONS OF BS EN ISO 4032 PC 10 NUTS Thread d M16 M20 M24 M30 M36 CHARACTERISTIC STANDARD General Requirements BS EN ISO 4032 or 4033 s P (pitch) dw min e min m max min max.=nom min Dimensions are in millimetres and apply prior to coating s DIMENSIONS OF BS EN ISO 4033 PC 12 NUTS Thread d M16 M20 M24 M30 M36 P (pitch) dw min e min m max min max.=nom min Dimensions are in millimetres and apply prior to coating Threads Self Colour Hot Dip Galvanized ISO 965 / BS 3643 tolerance class 6H ISO tolerance class 6AZ Materials & Manufacture BS EN Property Classes 10 & 12 Mechanical Properties Self Colour BS EN Property Class 10 Hot Dip Galvanized BS EN Property Class 12 Dimensions & Tolerances BS EN ISO 4032 Self Colour BS EN ISO 4033 Hot Dip Galvanized Finish / Self Colour / Black BS EN ISO as processed Coating Hot Dip Galvanized BS EN ISO Product Marking BS EN & BS EN Nominal Diameter & Thread Pitch PROOF LOAD OF NUTS Stress Area BS EN ISO 4032 PC 10 Standard 6H fit¹ Proof Load min BS EN ISO 4033 PC 12 over tapped 6AZ fit² mm² kn kn M16 x M20 x M24 x M30 x M36 x ¹ Nut finish self colour ² Nut finish hot dip galvanized
8 Page 7 of 8 PROPERTY CLASS 10 PROPERTY CLASS 12
9 Page 8 of 8 DIMENSIONS OF BS EN 7091 WASHERS Nominal size of bolt or screw Inside diameter d1 Outside diameter d2 Thickness s max min max min max min M M CHARACTERISTIC STANDARD General Requirements BS EN ISO 7091 Materials & Manufacture BS EN ISO 7091 Dimensions & Tolerances BS EN ISO 7091 Self Colour / Black BS EN ISO 7091 as processed Finish / Coatings Hot Dip Galvanized BS EN ISO M M M Dimensions are in millimetres and apply prior to coating
Cooper & Turner Ltd STRUCTURAL
Cooper & Turner Ltd STRUCTURAL Page 1 of 6 Dimensions of Fully Threaded Bolts/Setscrews CHARACTERISTIC STANDARD Thread d M12 M16 M20 M24 M30 M36 p (pitch) 1.75 2 2.5 3 3.5 4 a max. 5.3 6 7.5 9 10.5 12
More informationBS EN High Strength Structural Bolting Assemblies for Preloading. BOLT - Property Class 8.8
BOLT - Property Class 8.8 Page: 1 of 6 BS EN 14399-3 Bolt Dimensions Charateristi Standard Thread size d M12 M16 M20 M22 M24 M27 M30 M36 P pith of thread 1.75 2 2.5 2.5 3 3 3.5 4 b Bolt 125 30 38 46 50
More informationHigh-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading
1. Scope and field of application Page 1 of 8 This Technical Data Sheet defines the requirements of high-strength bolt and nut assemblies with calibrated preload, HRC System, hexagon and cup head bolts,
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationPractice Note on the Sourcing of Threaded Rod Used for Foundation Bolts
MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:
More informationBolt resistances: Class 10.9 Csk TCB: Non-preloaded using S275
Non-preloaded using S275 Single shear Double shear d A s F t,rd F v,rd 2 x F v,rd mm mm 2 kn kn kn 12 84.3 42.5 28.7 57.3 16 157 79 62.8 125.6 20 245 123 98 196 22 303 153 121 242 24 353 178 141 282 27
More informationHIGH PERFORMANCE STEEL ANCHORS
Throughbolt zinc plated, -HD Throughbolt hot dip galvanized anchor name BASE MATERIALS: concrete, stone non-cracked concrete PRODUCT CODE -10080/20 -HD-06050/10 zinc coat type thread diameter length FEATURES:
More information2MHP 3MHP 5MHP 8MHP 14MHP D8MHP
Profiles: t h t h s 2MHP, 3MHP, 5MHP, 8MHP, 14MHP optibelt OMEGA HP W T Profile: D8MHP HIGH PERFORMANCE TIMING BELT MADE OF CHLOROPRENE maintenance-free, with glass-fibre tension cord 2MHP 3MHP 5MHP 8MHP
More informationMILD STEEL FLATS. Size (mm)
Page 6 MILD STEEL FLATS Product Shortname: FL W t Specifications: AS3679-300 AS3679-350 (on indent only) JIS G3101-SS400 Range Available: 13 x 3 0.31 16 x 3 0.38 16 x 6 0.75 20 x 3 0.47 20 x 5 0.79 20
More information026-2 : 1996 CEB STANDARD
026-2 : 1996 CEB STANDARD COMPRESSION CONNECTORS & TERMINATIONS FOR OVERHEAD LINE CONDUCTORS CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable
More informationDrop Forged Chain For Conveyors & Elevators
Drop Forged Chain For Conveyors & Elevators Quality Components for Chain Conveyors & Elevators Introduction Members of the Schenck Process Group, Stock Redler Ltd are leading providers of feeding, automation
More informationCHAINS.
CHAINS www.vanguardsteel.com CHAIN TABLE OF CONTENTS Page Chain Grade 30 Dimensions 1 Grade 30 Bright 2 Grade 30 Galvanized 3 Grade 30 Zinc Plated 4 Grade 70 5 Grade 80 6 Grade 100 7 Jack 8 Long Link 9
More informationHook & Eye Turnbuckles
Hook & Eye Turnbuckles HG-225 Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 1, a shackle one size
More informationOverhead transmission lines Spacers
= SVENSKA KRAFTNÄT SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AEL, Asset Management Lines OUR REFERENCE TR05-08E DATE 2016-06-09 CONSU12TATIONS TECHNICAL GUIDELINE REVISION 3 APPROVED Overhead transmission
More informationLouvre systems. Series WL Standard weather louvres. Incorporating. Standard range of single bank louvres as used in countless installations worldwide.
Louvre systems Incorporating Series WL Standard range of single bank louvres as used in countless installations worldwide. Good resistance to water ingress, with low resistance to airflow. Approximately
More informationEJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...
EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)
More informationSize and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationSTEEL WIRE & ROPE FITTINGS
6 Beaver maintains a wide range of wire rope and fittings that can be used for towing and lifting applications. Furthermore Beaver has the ability to offer manufactured slings made to order. With Beaver
More information...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
More informationCLAMPED PIPE SHOE EME-CS1 (1/2 8 )
CLAMPED PIPE SHOE EME-CS1 (1/2 8 ) Designed to eliminate field welding requirements for pipe supports. Ease of installation. Easy to install due to bolt system. Fields of application: Offshore and onshore
More informationINDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
More informationWGA Long throw nozzle grille
Technical documentation WGA Long throw nozzle grille Contents Function and use... 2 Models... 2 Processing... 3 Accessories... 3 Models and dimensions... 4 Quick selection... 12 Installation situation...
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
More informationTHOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
More informationHoist Chains. Hebezeugketten
Hoist Chains Hebezeugketten Hebezeugketten Fine Tolerance Hoist Chains acc. to EN 818-7 THIELE Hoist Chains according to EN818-7 (fulfil also DSKN 726300) are manufactured on modern digital controlled
More informationWire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
More informationBolt-on Swivel Load Rings with Link - RUD VLBG with optional bolt lengths.
1 of 5 11/03/2015 11:15 (/) RUD "VLBG" Bolt-on Swivel Hoisting Rings, Rotating Swivel Eye Bolts. Metric & Imperial Thread - Range from 300kg to 20,000kg Model: RUD VLBG / BSLR-56 Quick Ref: BSLR-56 Bolt-on
More informationCMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
More informationISO2858 END SUCTION PUMPS TECHNICAL DATA
CENTRIFUGAL PUMP PUMP X F Ø OUTLET A L Ø INLET H2 Standard Flange Drilling to AS2129-1982 Table E. Other drilling options available on request. D T2 T1 H1 Dimensions in millimetres. Pump Size Inlet Outlet
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationKM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, 5kN
KM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, Description The load cell KM26z is a membrane-type force sensor with small dimensions. It is suitable for measuring compressive and tensile forces. For force
More informationoptibelt ALPHA TORQUE
t Profiles: ß s ht h s T2.5, T5, T10, MXL, XL, L t Profiles: ß h t h s AT5, AT10 s optibelt ALPHA TORQUE POLYURETHANE TIMING BELTS ß s s ß t t h t h t h s1 Profiles: DT5, DT10 maintenance-free, with steel
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationbut this affects the load rating - please ask for more information. Please refer to our technical information pages when specifying and/or using.
Double Swivel Shackle Nuts female Lifting Bolts & Shackles 4010 Material High tensile steel, strength class >8. Supplied with CE certificate. Technical notes Designed to be used directly with the hook
More informationKING PIN KIT T KING PIN KIT. Contents
Contents Important Information 1 Contents 3 Installation Guide 4 Torque Table CPS 8 Torque Table CPS 807 11 Terex Warranty System 12 T118052 Issue 1 - FEB 2011 Important: Familiarise yourself with the
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationproduct catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
More informationHeavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
More informationThe obvious choice in piping cushion clamp assemblies since 1966
The obvious choice in piping clamp assemblies since 1966 TM INTRODUCTION ydra-zorb Co. has been the leader in the strut mounted clamp market for over 40 years, offering a wide variety of solutions when
More informationSafety Grating DIAMOND-GRIP PRODUCT DESCRIPTION FEATURES & BENEFITS MATERIAL SPECIFICATIONS. Note:
DIAMOND-GRIP PRODUCT DESCRIPTION Diamond-Grip is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has
More informationDEUTSCHE NORM June 2006 DIN EN { ICS ; Supersedes DIN EN : See start of validity
DEUTSCHE NORM June 2006 DIN EN 14399-4 { ICS 21.060.10; 21.060.20 Supersedes DIN EN 14399-4:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 4: System HV Hexagon
More informationPresby Steel, LLC. 143 East Milan Road Berlin, NH FAX:
143 East Milan Road 603-752-3022 FAX: 603-752-2821 1 S BEAMS (I Beams) Conforms to ASTM A36 Designation Web Depth/Inches Thickness Flange in Inches Area x Wt./Ft./Lbs. in Inches Width Thickness Sq. In.
More informationSY PVC / BS EN Control Flexible Cable
SY PVC / BS EN 50525-2-51 Control Flexible Cable Eland Product Group: A5J APPLICATION Used as interconnecting cable for measuring, controlling or regulation in control equipment for assembly and production
More informationAPPENDIX D. D.1 Macalloy Bars. Approximate safe working loads (kn) Appendix D - Proprietary Components (1/9) Stainless steel architectural ties
Appendix D - Proprietary Components (1/9) APPENDIX D D.1 Macalloy Bars Bar dia. mm Stressing ties Stainless steel stressing ties Stainless steel architectural ties High strength Tie rods grades precision
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationYOUR LOCAL DISTRIBUTOR:
TM The obvious choice in piping clamp assemblies since 1966 TM ydra-zorb Co., P.O. Box 214407, uburn ills, MI 48321-4407 (248) 373-5151 Fax (248) 373-0711 www.hydra-zorb.com YOUR LOCL DISTRIBUTOR: INTRODUCTION
More informationINSTRUCTIONS FOR USE CAUTIONS AND WARNINGS
SECTION 3 General INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS Commercial shackles are not to be used for lifting purposes. Should extreme circumstances or shock loadings be applicable, this must be taken
More informationHPC. Dual Displacement Staffa Radial Piston Motors HT 18 / C / 150 / 1007 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationproduct catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
More informationGrilles & Diffusers. Series NV Non-vision grilles. Incorporating. Sight blocking design ensures privacy is maintained
Grilles & Diffusers Incorporating Series NV Sight blocking design ensures privacy is maintained Perfect for areas like changing rooms Four models available including units to suit door mounting and dark
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationLouvre systems. Series WL Standard weather louvres. Incorporating. Standard range of single bank louvres as used in countless installations worldwide
Louvre systems Incorporating Series WL Standard range of single bank louvres as used in countless installations worldwide Good resistance to water ingress, with low resistance to airflow Approximately
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationSUREFLOW FLANGED FITTINGS DUCTILE IRON PIPELINE SYSTEMS
80-750. MANUFACTURED TO AS/NZS 2280. FLANGE DIMENSIONS TO AS 4087 Ductile Iron fittings provide high strength and impact resistance Suitale for in ground or aove ground applications All fittings are supplied
More informationov-lifting_bolts_divider - Updated Lifting Bolts
ov-lifting_bolts_divider - Updated - 09-01-2017 Lifting Bolts Technical Information roduct information Lifting Bolts roduct marking Compliant with 2006/42/EC, and with individual date of manufacture and
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationPre-Load Bolt Assemblies BS EN HRC Assemblies BAPP
Pr-Loa Bolt Assmblis Pr-Loa Bolt Assmblis k BS EN 14399-10 HRC Hxagon Bolt Dimnsions b(rf.) c a s w k kw r s pb c max. min. max. max. min. max. min. min. nom. max. min. min. min. max. min. M12 1.75 30
More information3.1 Available sections, terms of delivery
3.1 Interlocks LARSSEN section Interlock design conforming to DIN EN 10248-2 and E 67 of EAU 2004 LARSSEN 43, 430 HOESCH section (LARSSEN interlock) Interlock design conforming to DIN EN 10248-2 and E
More informationPolyester Lifting Slings
Est. 969 Polyester Lifting Slings FASTLIFT Endless Roundsling (ERS) Roundslings with seamless single cover and protected label WLL Colour Weight Rec. min Rec. min Standard size range available (tonnes)
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationNo clips required for this panel system
ROOFING S SERIES 1000, 1100 & 1101 ABOUT SPACING... This guide is intended to provide you with sufficient information so that you may choose the appropriate clip for our metal roof system. We have purposely
More informationSeries CAV-06. (ValveasperP17,Edition-4)
Key Operated Valves in Packed design for Chlorine and Liquefiable Corrosive Gases (ValveasperP17,Edition-4) (ValveasperENISO1097:006) (ValveasperIS34:00) Precision machining for high performance Metal
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
More informationACSR- ROPES Aluminium wire steel reinforced (ACSR conductor)
ACSR- ROPES Aluminium wire steel reinforced (ACSR conductor) The steel reinforced aluminium conductor consists of seven or more aluminium wires applied in concentric layers over a steel core made of one
More informationRenold Roller Chain products are available from
Renold Roller Chain products are available from MARYLAND METRICS RENOLD Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationTrelleborg en g INeereD SYSTeMS Marine Fenders
Marine Fenders Why Trelleborg Fenders? There is a simple reason to use our fenders: it is just too expensive not to do so. Every modern marina, port or harbour invests in the protection of their structures
More informationBall Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
More informationSTARLINE MOTORPUMPS TECHNICAL DATA
PUMP CENTRIFUGAL PUMP A F X* A H2 C L H1 Pump MODEL Shaft No. MOTOR HP Pumps with 3500 RPM (Nominal Speed ) TEFC Motors FRAME SIZE Inlet D R Outlet IMP Dia E ØK P G J B Pump Dimensions (INCHES) A B C D
More informationTorque Tension Control
Coating Lubricity or Torque Tension As efforts are made to use a fastener at its ultimate capacity, to economise on fastener size, strength and numbers used, the lubricity of the fastener assumes a great
More informationThe cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. Zinc-plated steel Stainless steel Hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS Zinc-plated steel Stainless steel Hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
More informationThread Forming Technology for Light Metals
Thread Forming Technology for Light Metals Cost & Design Savings Advantages High joint strength Safety against dynamic loads Consistently high clamp loads Self-locking vibration resistance Easy lead-in,
More informationROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS DESIGN GUIDE PURLINS AND GIRTS S&T029N
DESIGN GUIDE PURLINS AND GIRTS ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS S&T029N JUL 2015 CONTENTS INTRODUCTION 2 Acknowledgements 2 Disclaimer 2 Product Technical Statement 3 Producer Statement
More informationPORCELAIN INSULATORS
Solid Core Station Post Insulator PORCELAIN INSULATORS It is an insulator of generally columnar shape, and it consists of one post insulator unit or an assembly of such units and is intended to give rigid
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationSurge arrester POLIM-H..SD
Data sheet Surge arrester POLIM-H..SD Technical data Classification according to EN 50526-1 and IEC 62848-1 Nominal discharge current I n (8/20 µs) 10 ka peak Class DC-B High current impulse I hc (4/10
More informationMELUM weather louvres
MELUM weather louvres idealairgroup.com.au WL40 WL40B WL40F WL50SF WL100 WL100B WL100F WL40R WL40R6 WL40R8 WL40R10 WL40R12 WL40R14 WL50SF WL50SF88 WL50SF95 WL50SF97 WL50SF168 SB SB88 SB95 SB97 SB168 idealairgroup.com.au
More informationRapid Lifting Anchor System. Connector Ring Clutch (t)
Rapid Lifting Anchor System The Rapid Lifting System primary purpose is to lift precast concrete with the help of its Rapid anchoring system, comprises of required dynamic load bearing anchor and required
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD First edition 1996-04-15 Connections for general use and fluid power - Ports and stud ends with IS0 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with
More informationMarine Tie Rods Ground Anchoring Solutions
Marine Tie Rods Ground Anchoring Solutions www.dextragroup.com 2 Dextra Marin Tie Rods Marine Tie Rods Port Autonome de Pointe Noire, Republic of Congo Typical applications Harbours Wharves Jetties River
More informationIndustrial Horizontal Bearings IH and HD Series
Industrial Horizontal Bearings IH and HD Series 2 3 About Us As the inventor of the hydrodynamic bearing over 100 years ago, Michell Bearings has continued to develop its products to meet the changing
More informationTECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.
TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationSurge arrester POLIM-H.. ND
DATA SHEET Surge arrester POLIM-H.. ND Technical data Classification according to EN 50526-1 and IEC 62848-1 Nominal discharge current I n (8/20 µs) 10 ka peak Class DC-B High current impulse I hc (4/10
More informationFIREBIRD LIFEJACKET (SOLID TYPE) CHEST
INDUSTRIAL SUPPLIES 4 Minto Place, Altens Industrial Estate, Aberdeen, AB12 3SN www. tel: +44 (0) 1224 248821 fax: +44 (0) 1224 248831 FIREBIRD LIFEJACKET (SOLID TYPE) CHEST INDUSTRIAL BOXES & CASES 1
More informationS E L F - C L I N C H I N G S T U D S A N D P I N S
S E L F - L I N I N G S T U D S A N D P I N S SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard
More informationPre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001
Technical Guide WM5.1 Viking Johnson Couplers and Flange Adaptors Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology. Scan for more
More informationPEINER HV- Structural bolt sets
PEINER HV- Structural bolt sets Leading in steel construction PEINER HV-bolt-sets PEINER Umformtechnik is a company of Indian Sundram Fasteners Limited (SFL). Sundram is a member of the TVS Group, one
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 6 Cable Ladder Covers A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 6: Cable Ladder Covers Flat Cover
More informationSIT BANDED - Narrow (ISO) SPZ - SPA SPB - SPC XPZ - XPA XPB - XPC V-BELTS - BANDED ISO APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL
SIT BANDED - Narrow (ISO) E MC SPZ - SPA SPB - SPC XPZ - XPA XPB - XPC APPLICATIONS For shock loads applications, ideal for pulsating loads, high capacity drives and for short-center, heavy-duty drives.
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationAir Conditioners. Technical Data UATYQ-CY1
Air Conditioners Technical Data R o o f t o p s E E D E N 2-2 0 UATYQ-CY Air Conditioners Technical Data R o o f t o p s E E D E N 2-2 0 UATYQ-CY Single Unit Rooftop UATYQ-CY TABLE OF CONTENTS UATYQ-CY
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More informationStenhøj Major MOT / ATL
Major MOT / ATL Major MOT / ATL 4-post electro-hydraulic inspection lifts The program comprises 2 basic series an MOT series and an ATL series. The MOT series consists of Major 426B, Major 430B and Major
More informationAccessories for diaphragm seals Block flange and saddle flange Models , ,
Accessories Accessories for diaphragm seals Block flange and saddle flange Models 910.19, 910.20, 910.23 WIKA data sheet AC 91.01 Applications For welding into the product line or heating line for establishing
More informationTABLE OF CONTENTS FOREWORD... 2 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS... 3
TITLE SPECIFICATION FOR MEDIUM VOLTAGE DATE: FEBRUARY 2015 PAGE: 1 OF 25 TABLE OF CONTENTS Page FOREWORD... 2 INTRODUCTION... 3 1 SCOPE... 3 2 NORMATIVE S... 3 3 DEFINITIONS AND ABBIATIONS... 3 4 REQUIREMENTS...
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More information