Peter Holzrichter GmbH Schönebecker Platz 11 42283 Wuppertal Tel + 49 202 562-0 Fax + 49 202 562-278 info@holzrichter-stahl.de www.holzrichter-stahl.de Supply and dispatch warehouse in the Loh industrial park Access via Schönebecker Straße Supply and dispatch warehouse in Herdecke Hauptstraße 130-132 58313 Herdecke Tel + 49 2330 9268-0 Fax + 49 2330 9268-114 Rainer Schmitt (Proxy Holder) Tel + 49 202 562-228 Fax + 49 202 562-444228 Sales, sheets Harald Bloemen Tel + 49 202 562-176 Fax + 49 202 562-444176 Katrin Böckmann Tel + 49 202 562-268 Fax + 49 202 562-444268 Marcel Dreisbach Tel + 49 202 562-227 Fax + 49 202 562-444227 Bernhard Kretschmann Tel + 49 202 562-281 Fax + 49 202 562-444281 Konrad Kusber Tel + 49 202 562-112 Fax + 49 202 562-444112 Heike Lademacher Tel + 49 202 562-208 Fax + 49 202 562-444208 Johanna Lasok Tel + 49 202 562-229 Fax + 49 202 562-444229 Melina Palumbo Tel + 49 202 562-172 Fax + 49 202 562-444172 Olga Timermane Tel + 49 202 562-102 Fax + 49 202 562-444102 Sales, bar steel Jochen Kaiser Tel + 49 202 562-175 Fax + 49 202 562-444175 Janine Köther Tel + 49 202 562173 Fax + 49 202 562444173 Miroslaw Michalski (Ass. Man.) Tel + 49 202 562-224 Fax + 49 202 562-444224 Tanja Mickels Tel + 49 202 562-170 Fax + 49 202 562-444170 Nadine Stark Tel + 49 202 562-135 Fax + 49 202 562-444135 Sales, rolled steel Stephan Doert (Assistant Manager) Tel + 49 202 562-230 Fax + 49 202 562-444230 Simone Emmel Tel + 49 202 562-225 Fax + 49 202 562-444225 E-Mail: 1.Letter Firstname. Surname@holzrichter-stahl.de e.g.: r.schmitt@holzrichter-stahl.de ä=ae, ü=ue, ö=oe, ß=ss DIN EN ISO 9001:2000 Cert. no. QS-106HH We are quality assured and have been certified in wholesaling, including storage and processing, since 1993. Bright Steel Stainless Steel - Bright Bars Stainless Steel Strips Coils Blancs Rolled Steel Tubes Perforated Plates Aluminium Piston Rods Cylinder Tubes
Bright Steel Stainless Steel - Bright Bars Stainless Steel Strips Coils Blancs Rolled Steel Tubes Perforated Plates Aluminium Piston Rods Cylinder Tubes Rolled Steel
YOUR BASE PRODUCT ROLLED STEEL IN MANY VARIETIES The range of uses for our rolled steel products, bar steel and heavy plates, is exceptionally broad. We stock a wide range of bar steel and hot rolled steel sheets as well as tear drop plates and hot rolled coils. Thus, the bar steel product line includes the qualities S235JR and S355J2 also grade S235JR galvanised. Whether it is strip-, flat-, universal-, angle, square- or round bar steel, T-sections or U-sections - we have it! In total we have more than 1,000 dimensions, which are stored in a modern bar storage system. Nevertheless, should you be in need of something, that we do not stock, we are in the position to supply you with this product, because we have been working together for many years with reputable manufacturers. In addition, we can offer you descaling, priming and bench sawing. Our hot rolled sheet range includes the grades S235JR and S355JR, as well as micro-alloyed fine-grained steel in grades S355MC to S700MC. We offer all grades also in pickled and oiled. In addition to the traditional warehouse formats, we can also cut the hot rolled coils to length, specified by you. Furthermore we provide hot rolled steel plates with a broad range of qualities and thicknesses as drop shipments with a very short delivery time. 2
BESTSELLER SHEETS FROM STOCK Our thin sheets are so even and have such a close tolerance that they are especially suitable for modern canting, blanking and laser technologies. They are used in mechanical engineering, air conditioning and systems technology, as well as filter and ventilation systems. We store EG material exclusively on nailed wooden pallets (with paper and/or film packaging). If you have a bar storage sytem, we can transfer the material to your steel pallets. Whether single sheets, complete batches, small, medium, large or special formats, we will be pleased to process your order. 3
Sheets Stock - Sheets Dimensions DC 01 greased DC 01 ungreased DX 51 galvanised DC 01 ZE elec. galv. DX 51 alu zinc 0.75 x 1,000 x 2,000 mm 0.75 x 1,250 x 2,000 mm 0.75 x 1,250 x 2,500 mm 0.75 x 1,500 x 3,000 mm 0.88 x 1,000 x 2,000 mm 0.88 x 1,250 x 2,000 mm 0.88 x 1,250 x 2,500 mm 0.88 x 1,500 x 2,000 mm 0.88 x 1,500 x 3,000 mm 1.00 x 1,000 x 2,000 mm 1.00 x 1,250 x 2,000 mm 1.00 x 1,250 x 2,500 mm 1.00 x 1,500 x 2,000 mm 1.00 x 1,500 x 3,000 mm 1.25 x 1,000 x 2,000 mm 1.25 x 1,250 x 2,500 mm 1.25 x 1,500 x 3,000 mm 1.50 x 1,000 x 2,000 mm 1.50 x 1,250 x 2,500 mm 1.50 x 1,500 x 3,000 mm 2.00 x 1,000 x 2,000 mm 2.00 x 1,250 x 2,500 mm 2.00 x 1,500 x 3,000 mm 2.50 x 1,000 x 2,000 mm 2.50 x 1,250 x 2,500 mm 2.50 x 1,500 x 3,000 mm 3.00 x 1,000 x 2,000 mm 3.00 x 1,250 x 2,500 mm 3.00 x 1,500 x 3,000 mm 4.00 x 1,000 x 2,000 mm 4.00 x 1,250 x 2,500 mm 4.00 x 1,500 x 3,000 mm 4
Material qualities Formats Material qualities Product group Thickness Steel standard Cold-rolled non-coated steels DC 01 Hot-dip galvanised steels DX 51 D + Z Electrolytically galvanised steels DC 01 ZE Aluzink steel DX 51 D + AZ 0.75-2.99 mm EN 10130 0.75-4.00 mm EN 10327 0.75-2.99 mm EN 10152 1.00-2.00 mm EN 10215 Formats 1,000 x 2,000 Small format 1,250 x 2,500 Medium format 1,500 x 3,000 Large format 5
Sheets Strips Sheets grade DD 11 EN 10111/10051 hot rolled, pickled and oiled, laser cut quality mm 1.50 2.00 2.50 2.99 1,000 x 2,000 1,250 x 2,500 1,500 x 3,000 1,000 1,500 mm width x desired length for all above-mentioned strengths from coil stock. Strips grade S235 JR / DD 11 EN10025/10111/10051 hot rolled, pickled and oiled, laser cut quality mm 4 5 6 8 10 12 1,000 x 2,000 1,250 x 2,500 1,500 x 3,000 1,000 1,500 mm width x desired length for all above-mentioned strengths from coil stock. Strips grade S235 JR / S355 JR EN10051/10025 hot rolled, laser cut quality mm 3 4 5 6 8 10 12 15 20 1,000 x 2,000 1,250 x 2,500 1,500 x 3,000 2,000 x 3,000 2,000 x 4,000 2,000 x 6,000 1,000 2,000 mm width x desired length for all above-mentioned strengths from coil stock. All dimensions can be offered in pickled and greased. As we are continuously expanding our range, you are welcome to enquire about non-listed dimensions. 6
Strips Sheets Strips grade S355 MC - S600 MC EN10149/10051 hot rolled, laser cut quality 1,000 2,000 mm width x desired length for all below-mentioned strengths from coil stock. mm 3 4 5 6 8 10 12 15 20 1,000 x 2,000 1,250 x 2,500 1,500 x 3,000 2,000 x 4,000 2,000 x 6,000 All dimensions can be offered in pickled and greased. Strips grade S700MC EN 10149/10051 hot rolled, laser cut quality mm 3 4 5 6 8 10 12 1,250 x 2,500 1,500 x 3,000 All dimensions can be offered in pickled and greased. Sheets grade S235 JR DIN 59220 / EN 10025 hot rolled, with teardrops 1,000 2,000 mm width x desired length for all below-mentioned strengths from coil stock. mm 3 4 5 6 8 10 12 15 1,000 x 2,000 1,250 x 2,500 1,500 x 3,000 2,000 x 6,000 Due to our good contacts, we can quickly deliver a wide range of grades and thicknesses of hot rolled plates. We can also offer you different formats between 15-100 mm from stock. 7
Steel bars Flat bars Steel bars Grades S235 JR black EN 10025 S235 JR galvanised EN 10025 S355J2 EN 10025 Product groups Flat bars EN 10058 Universal flats DIN 59200 Flat bars EN 10058 Round bars EN 10060 T-bars EN 10055 Square bars EN 10059 Angle bars EN 10056 Channels EN 10279 As we are continuously expanding our range, you are welcome to enquire about non-listed dimensions. Flat bars app. 6 m production length mm 5 6 8 10 12 15 20 25 30 40 50 15 16 20 25 30 35 40 45 50 60 70 75 80 90 100 110 120 130 140 150 8
Universal flats Flat bars Round bars Universal flats app. 6 m production length mm 5 6 8 10 12 15 20 25 30 160 170 180 190 200 220 240 250 260 280 300 350 400 Flat bars app. 6 m production length mm 3 4 5 6 15 16 20 25 30 35 40 50 60 70 80 110 120 130 140 150 Round bars 6-25 mm app. 6 m production length 6 8 10 12 14 15 16 18 19 20 22 24 25 = also 8 m production length Round bars 26-100 mm app. 6 m production length 26 27 28 30 35 36 40 42 50 60 70 80 90 100 = also 8 m production length 9
Channels T-Bars Angles Channels app. 6 m production length 30 40 40/20 50 50/25 60 65 80 100 120 140 T-Bars app. 6 m production length 20 25 30 35 40 45 50 60 70 80 90 100 120 140 = app. 6 m production length = also 12 m production length Angles (continued on following page) mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 24 20 x 20 25 x 25 30 x 20 30 x 30 35 x 35 40 x 20 40 x 40 45 x 30 45 x 45 50 x 30 50 x 40 50 x 50 60 x 30 60 x 40 60 x 60 65 x 50 65 x 65 70 x 70 75 x 50 75 x 55 75 x 75 80 x 40 80 x 65 80 x 80 90 x 60 90 x 90 100 x 50 100 x 65 100 x 75 100 x100 110 x110 120 x 80 120 x 120 130 x 65 130 x 130 = app. 6 m production length = also 12 m production length 10
Angles Square- Flat- Round- T-Bars Angles (continuation) mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 24 140 x 140 150 x 75 150 x 90 150 x100 150 x 150 160 x 80 160 x160 180 x 90 180 x180 200 x100 200 x 200 250 x 90 = app. 6 m production length = also 12 m production length Square bars app. 6 m production length 6 8 10 12 13 14 15 16 18 20 25 30 35 40 50 60 80 100 Flat bars app. 6 m production length grade S235JR galvanised mm 5 6 8 10 20 25 30 35 40 50 60 70 80 100 120 150 Round bars app. 6 m production length grade S235JR galvanised 8 10 12 14 16 18 20 T-Bars app. 6 m production length grade S235JR galvanised 25 30 35 40 45 50 60 11
Channels Angles Channels app. 6 m production length grade S235JR galvanised 40 40/20 50 50/25 60 65 Channels app. 12 m production length grade S235JR galvanised 80 100 120 140 160 Angles grade S235JR galvanised mm 3 4 5 6 7 8 9 10 11 20 x 20 25 x 25 30 x 30 35 x 35 40 x 20 40 x 40 45 x 30 45 x 45 50 x 30 50 x 50 60 x 30 60 x 40 60 x 60 70 x 70 75 x 50 80 x 40 80 x 65 80 x 80 90 x 60 90 x 90 100 x 50 100 x 65 100 x 75 100 x 100 120 x 80 120 x 120 130 x 65 150 x 100 160 x 80 180 x 90 200 x 100 = app. 6 m production length = also 12 m production length 12
Flat bars Universal flats Flat bars Universal flats grade S355J2 mm 5 6 8 10 12 15 20 25 30 35 40 50 60 20 25 30 40 50 60 70 75 80 90 100 110 120 130 140 150 160 180 200 220 240 250 300 350 400 500 = app. 6 m production length = also 12 m production length 13
Round bars Square bars T-Steel Angles Round bars app. 6 m production length grade S355J2 12 16 20 24 25 27 28 30 32 40 45 50 60 65 70 80 100 110 120 130 Square bars app. 6 m production length grade S355J2 30 40 50 60 70 80 100 120 150 = also 12 m production length T-Steel app. 12 m production length grade S355J2 100 120 140 Angles app. 12 m production length grade S355J2 mm 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 22 24 28 50 x 50 60 x 40 60 x 60 70 x 70 75 x 50 80 x 40 80 x 80 90 x 60 90 x 90 100 x 50 100 x 65 100 x 75 100 x 100 110 x 110 120 x 80 120 x 120 130 x 65 130 x 130 140 x 140 150 x 75 150 x 90 150 x 100 150 x 150 160 x 80 160 x 160 180 x 90 180 x 180 200 x 100 200 x 200 250 x 90 250 x 250 14
Notices 15