Carrying consols for asy an fficint i chang on th prss Konsol Typ 1835- Konsol Typ 1835- Colour: RAL 1004, goln yllow Carrying consol, hanging Th carrying consols ar hung in th hooks on th i changing si of th prss. Th hooks ar suppli with th consols. Th consols ar us as a pair only. Thir siz must slct to suit th highst i wight. Th i is loa onto th consols using a cran or a forklift truck. Th carrying rollrs consist of high-strngth harn nl arings. Th n stop can ypass in on irction only. Th surfac is provi with a shock-rsistant coating in RAL 1004, goln yllow. Hanging consols may us for svral prsss. In this cas, an aitional st of hooks is rquir. Konsol Typ 1835- Konsol Typ 1835- Carrying consol, support In orr to cop with havy an larg is, th hanging consol is provi with an aitional support. For compnsating for unvnnss on th floor, th supports ar sign as ajustal supports with a all-an-sockt joint. Th hight may chang susquntly y ±60 mm. Th n stop can ypass in on irction only. Konsol Typ 1835 Traglast/Paar k Konsol Typ 1835- Carrying consol, swivlling This consol is prmanntly fastn to th prss an can pivot into th i changing position. This typ is particularly rcommn whn th availal spac in front of th prss is limit, or if rmoval an intrmiat storag of th consol is not possil or rquir. For carrying rollrs, n stop an surfac coating, s aov. Spcial signs of carrying consols ar availal on rqust. Sujct to tchnical moification 1 Hilma-Römhl GmH Schütznstraß 74 D-57271 Hilchnach Phon +49 (0) 2733 / 281-0 Fax +49 (0) 2733 / 281-113 www.hilma. 8.1835
Carrying consol, hanging DIN 1481 - Ø 16 x 40 14,5 125 49 Chs ha scrw DIN 912-M 16 x 110-8,8 Ma = 1 Nm Hol pattrn h 1,5 Prss Konsol Typ 1835-3 Hook L +40 L Consol Scop of supply: 2 carrying consols (1 pair) 4 hooks Part no. Max. loa/pair Lngth of support Dimnsions (mm) Wight/ for 1 pair (kn) (L) (mm) a+1 c±0,1 h pair (kg) 8.1835.0001 5 500 86 60 M16 Ø16 1 15 8.1835.0002 10 500 86 60 M16 Ø16 150 18 8.1835.0003 10 0 86 60 M16 Ø16 1 8.1835.0104 10 1000 86 60 M16 Ø16 250 40 8.1835.0105 0 86 60 M16 Ø16 250 32 8.1835.0006 1000 86 60 M16 Ø16 0 48 8.1835.0107 1250 86 60 M16 Ø16 350 70 8.1835.0008 0 86 60 M16 Ø16 400 48 8.1835.0009 1000 86 60 M16 Ø16 450 66 8.1835.0010 1250 86 60 M16 Ø16 500 90 4 hooks ar suppli with th consols 1 aitional st of hooks (= 4 OFF) part no. 7.1835.0007 (40 kn) 8.1835 Hilma-Römhl GmH Schütznstraß 74 D-57271 Hilchnach Phon +49 (0) 2733 / 281-0 Fax +49 (0) 2733 / 281-113 www.hilma. Sujct to tchnical moification 2
f Chs ha scrws DIN 912 M16 x110, 8.8 Ma = 1 Nm DIN 1481 Ø16 x 40 14,5 B uppr g B uppr g f Carrying consol, support Consol - 40 kn B uppr g DIN 1481 Chs ha scrws DIN 912 Exampl for orring: 8.1835.01, SH 1000 consol 1000 mm long max. kn hight of support 1000 mm Consol 60-100 kn 1,5 Konsol Typ 1835-3 L +40 L Chs ha scrws DIN 912 M16 x 50 un M16 x 110 Ma = 1 Nm DIN 1481 Ø16 x 50 Consol 160-250 kn Prss Hook h Consol Whn orring, plas spcify th xact hight of support Scop of supply: 2 carrying consols (1 pair) 4 hooks 2 supporting ft Support Support with all-an-sockt joint (+/-60 mm) plas spcify support high Chs ha scrws DIN 912 M24 x un M24 x 160 Ma = 250 Nm DIN 1481 Ø x 100 x Thra hols M16 for y olts (transport y mans of fork stackr) Part no. Max. loa/pair Lngth of support Dimnsions (mm) Wight/ for 1 pair (kn) (L) (mm) a+1 c±0,1 f h x pair (kg) 8.1835.01 1000 86 60 M16 Ø16-150 125 60 8.1835.3102 1250 86 60 M16 Ø16-1 125 8.1835.03 1600 86 60 M16 Ø16-0 125 100 8.1835.34 40 1000 86 60 M16 Ø16-0 125 70 8.1835.35 40 1250 86 60 M16 Ø16-0 125 85 8.1835.36 40 1600 86 60 M16 Ø16-225 125 110 8.1835.39 60 1000 91 105 45 M16 Ø16 0 125 75 8.1835.3210 60 1250 91 105 45 M16 Ø16 2 125 90 8.1835.3211 60 1600 91 105 45 M16 Ø16 240 125 1 8.1835.3212 60 00 91 105 45 M16 Ø16 270 125 170 8.1835.3213 100 1250 91 105 45 M16 Ø16 250 125 100 8.1835.3214 100 1600 91 105 45 M16 Ø16 2 125 140 8.1835.3215 100 00 91 105 45 M16 Ø16 3 125 1 8.1835.3216 160 1600 160 145 75 M24 Ø 260 210 240 8.1835.3217 160 00 160 145 75 M24 Ø 260 210 3 8.1835.3218 160 2500 160 145 75 M24 Ø 2 210 4 8.1835.32 250 2500 160 145 75 M24 Ø 360 210 540 4 hooks an 2 supports ar suppli with th consols 1 aitional st of hooks (= 4 OFF) part no. 7.1835.0007 (40 kn), part no. 7.1835.0021 (100 kn), part no. 7.1835.0022 (250 kn) Sujct to tchnical moification Hilma-Römhl GmH Schütznstraß 74 D-57271 Hilchnach Phon +49 (0) 2733 / 281-0 Fax +49 (0) 2733 / 281-113 www.hilma. 8.18351
Carrying consol, swivlling Hol pattrn a Holr Consol 1,5 k Konsol Typ 1835- c g min. i 125 70 h Chs ha scrws DIN 912 M16 x 40, 8.8 Ma = 1 Nm DIN 1481 Ø10 x 50 Lock 90 DIN 1481 Prss Chs ha scrw DIN 912 60 Scop of supply: 2 carrying consols (lft an right si) 4 holrs (prmount) Th carrying consol is swivlling on th lft an right si Part no. Max. loa/pair Lngth of support Dimnsions (mm) for 1 pair (kn) (L) (mm) a±0,2 ±0,1 c±0,1 g h i k±0,1 8.1835.1001 10 500 90 M16 Ø10 550 0 1 91,5 8.1835.1002 10 1000 90 70 M16 Ø10 1050 250 1 91,5 8.1835.1003 1000 90 1 M16 Ø10 1050 0 1 91,5 8.1835.1004 1250 90 170 M16 Ø10 10 350 1 91,5 8.1835.1105 40 1000 90 210 M16 Ø10 1050 450 1 121,5 8.1835.1106 40 1250 90 260 M16 Ø10 10 500 1 121,5 8.1835.1107 60 1000 90 310 M16 Ø10 1050 550 1 121,5 8.1835.1108 60 1250 90 460 M16 Ø10 10 700 1 121,5 Carrying consols ar suppli in pairs with holrs fastn, ray for connction Spcial signs an oul-swivl consols ar availal on rqust. 8.18352 Hilma-Römhl GmH Schütznstraß 74 D-57271 Hilchnach Phon +49 (0) 2733 / 281-0 Fax +49 (0) 2733 / 281-113 www.hilma. Sujct to tchnical moification
Di changing station with riv Dscription: Th cost-ffctiv riv systm has n vlop on th asis of stanar i consols an can asily install as it rquirs only littl spac. Thus, it is vry suital for oth rtrofitting an nw constructions. Th riv unit an th carrying consol ar hung in hooks provi on th prss for this purpos an thn lock. Th i is posit on th consols using a cran or a forklift truck. Aftr th i has n posit, it can connct to th changing station y mans of a push-an-pull systm. Di changing systm irctly aapt to th prss This nw i changing systm with spcial pushpull riv maks hanling of is asir an nsurs tim-saving an accint-fr movmnt of is with a maximum wight of 10 tons in placs ifficult to accss. (Highr loa-aring capacitis on rqust) Th intgral chain riv systm allows th usr automatic i loaing an positioning, just y prssing a pushutton on a sparat rmot control pnant During a i chang, th prss is fr, i.. th push-an-pull lmnts o not projct ovr th prss. Furthrmor th rar si of th prss is compltly fr. This changing station is suital for almost any prss, can asily rmov an is asy to hanl. Spcial faturs: Bsis th ruction of non-prouctiv st-up tim, th i changing systm offrs furthr cisiv nfits to th usr: maximization of profits u to lss owntim smallr prouction atchs ar possil u to shortr st-up tims gratr safty for man an machin saf an accint-fr hanling of is with lss ffort, thus crating a mor humanis plac of work Rollr an all ars in th T-slots of th tal provi for asy insrtion of th i, ithr manually or automatically. Damag to th i causing prouction loss is avoi. Iniviual solutions incluing automatic i changing an intgration in th prss ar possil. Sujct to tchnical moification Hilma-Römhl GmH Schütznstraß 74 D-57271 Hilchnach Phon +49 (0) 2733 / 281-0 Fax +49 (0) 2733 / 281-113 www.hilma. 8.18353