Pipe Fittings. HP Series

Similar documents
Pipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads

Pipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.

Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11

Gaugeable Tube Fittings and Adapter Fittings

Product warranty. Quality Policy. The Goal

Gaugeable Tube Fittings and Adapter Fittings

Gaugeable Tube Fittings and Adapter Fittings

INSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,

Instrument Thread Fittings High Technology Valve & Fitting Series

Instrumentation Pipe & Weld Fittings. No.03-9 August 2017

VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels

Instrument Thread Fittings. High Technology Valve & Fitting Series

Gaugeable Tube Fittings and Adapter Fittings

Gaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings

An Installer s Pocket Guide for Swagelok Tube Fittings

Metal Gasket Face Seal Fittings

THE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.

THE PREMIUM QUALITY. Catalog Number 01-5 November,

Pipe Fittings. We deliver confidence through quality products

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.

Forged High Pressure Pipe Fittings

INSTRUMENTATION METERING VALVES. VMT Series.

TUBE FITTINGS INSTRUMENTATION.

Instrumentation Thread Fittings

TUBE FITTINGS INSTRUMENTATION.

Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options

FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, Offenbach am Main, Germany Tel.: Fax:

Check valve series. SHCV, SOCV, SOACV, SACV Series. Phone: Fax: Wimbledon Rd.

Hi-Duty Flareless Tube Fittings

SUPPLY JOINTS CONTENTS

SCREWED BONNET NEEDLE VALVES

Rapid push-in fittings for plastic tubes Series 1000

DK-LOK Hydraulic Pipe Fittings

BRASS PIPE FITTINGS 100A-BA. CONSTRUCTION CA360, CA345, CA3604, CA377 Brass. Use with brass, copper or iron pipe. Temperature Range: 65 to +250 F.

Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC

120 SERIES ONE PIECE TYPE

HIGH PRESSURE BAR STOCK BALL VALVES. VB6B Series.

A Complete Range of Adaptors

Inverted Dual High-Pressure Fluid Filter Assemblies

Integral-Bonnet Needle Valves

Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.

82 Series Fittings Table of Contents

Bronze Fittings 125# and Flanges 150#

ISO 9001 Certified Fitting and Valve Manufacturer

OUR COMPLETE ACCESSORIES LINE INCLUDES:

Series 10-M. Miniature fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap nut. Gasket. Body. Gasket Low tightening torque Tight seal

Piping Material Specification - Piping class : CS101

Steel Conduits Conduit Fittings Flexible Conduits

Pneumatic Fittings & Tubing

Fittings, Materials and Tubing Guide. Instrumentation Products

Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL

Replacement Parts List FI 1509 & FI 1509C. SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017

INSTRUMENTATION UNION BONNET VALVES. VU6 Series.

Quick-connects. QC, QF, QV and QM Series.

Flare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves

VCR Metal Gasket Face Seal Fittings

:,Rhino SD/XD G/D 24 Vdc ISO

Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division

Rhino VE Follower Modules

Gauge valves Type SNV-ST and SNV-SS

VCR Metal Gasket Face Seal Fittings

Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Tube Fitting Valves Clean Fitting Pipe Fitting

Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L

Parts List Safety Stations

Replacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016

Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101

Description. Rhino SD2/XD2 Follower Modules

BALL VALVES - VB3 Series

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)

LF 3600 Push-In Fittings Range

Male - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint

Super-rapid fittings Series X6000 in Stainless Steel 316L

Series 10-M. RoHS. Miniature Fittings. Construction. Tubing. Tubing. Barb. Barb. Body. Cap Nut. Gasket. Body. Gasket.

Lincoln installation components, accessories and lubrication fittings

O-Rings. Back pressure may be required to reseal the valves with nominal cracking pressure of 5psi or lower.

S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

PRESSURE REGULATORS PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure

Type 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.

Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL

Standard screw fittings Brass Art. No to

in stainless steel 316L

Instrument Pipe & ISO Conversion Fittings. Catalog 4260 Revised, February 1999

Manifold & Gauge Valves I [

TUBE & PIPE SECTION D

BRASS FITTINGS (R410a) BRASS FITTINGS

FIT-2. Inch. Ø Â" to Ë" O/D tube

Odor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange

CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles

ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES

Instrument Pipe Fittings Instrument Pipe Fittings Introduction Parker Instrumentation Pipe Fittings are designed as leakfree connections for process,

Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units

Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters

Instrumentation Manifold Valves

PART # DESCRIPTION OIL HOUSINGS PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO

Lubrication Installation Components, Accessories & Fittings Table of Contents

Stop Needle Valves SNV-ST and SNV-SS

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE

Transcription:

Pipe Fittings HP Series

Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow Female lbow Male Tee Male Street Tee Male ranch Tee Female Tee Female Cross 03 04 05 05 06 09 0 2 3 4 6 6 7 8 8 8 9 9

Features very fitting is marked with type and size, as well as the manufacturer All fittings are cleaned to remove oil, grease, and loose particles Straight fittings are manufactured from quality bar stock for strength, shaped fittings are manufactured from forgings Technical Data Material Standards Material 36SS rass Carbon steel Designator SS CS ar Stock ASM SA479, ASTM A276 ASM 6, ASTM 453 ASTM A08 Forgings ASM SA82, ASTM A82 ASTM 283 ASTM A576 To resist corrosion, all carbon steel fittings are treated with an electrodeposited zinc plating Thread Specifications Thread Type Specification NPT ASM.20., SA AS705 SP(Tapered) IS0 7/, S 2, JIS 0203 SP(Parallel) IS0 228, JIS 0202 Unified(SA) ASM. Metric(M) ISO 26, G/ T96 Pressure Ratings asis Ratings are based on ASM/ANSI 3.3. Material 36SS rass Carbon steel Allowable Stress Value 20000psig(378bar) 0000psig(689bar) 20000psig(378bar) Thread Pressure Ratings Pipe nd(npt and ISO 7) Pressure Ratings NPT/ISO Pipe /6 2 36SS and Carbon Steel Male Female psig bar psig bar 000 759 6700 462 0000 690 6500 448 8000 552 6600 455 7800 538 5300 366 7700 53 4900 338 7300 503 4600 37 5300 366 4400 303 6000 44 5000 345 5000 345 4600 37 3900 269 3900 269 rass Male Female psig bar psig bar 5500 379 3300 228 5000 345 3200 22 4000 276 3300 228 3900 269 2600 79 3800 262 2400 66 3600 248 2300 59 2800 93 2200 52 3000 207 2500 72 2500 72 2300 59 900 3 900 3 Note: Calculations based on ASM 3.3 for process piping www.fitok.net

SA/MS Pressure Ratings SA/MS Thread 5/6-24 7/6-20 -20 9/6-8 -6 7/8-4 /6-2 3/6-2 5/6-2 5/8-2 7/8-2 2-2 36SS and Carbon Steel Nonpositionable Positionable psig bar psig bar 4568 3626 2900 2320 83 35 250 200 60 25 4568 3626 2900 2320 83 450 35 250 200 60 25 00 Note: Pressure ratings are from SA J926/3 Temperature Ratings System temperatures may be limited by the thread sealant,gasket or O-ring material Fitting Materials Material 36SS rass Carbon steel Temperature -325 o F(-200 o C) Temperature 200 o F(649 o C) 400 o F(204 o C) 375 o F(90 o C) Remark: (For stainless steel) Prolonged exposure to temperature over 800 o F(426 o C) is not recommended Gasket, O-ring Materials Component Material Temperature Temperature RS gasket una-n Fluorocabon FKM -3 o F(-25 o C) 5 o F(-5 o C) 230 o F(0 o C) 400 o F(204 o C) RG, RP gasket Copper -325 o F(-98 o C) 800 o F(426 o C) O-rings Viton una-n - 40 o F(-40 o C) -3 o F(-25 o C) 450 o F(232 o C) 230 o F(0 o C) Information Add a material designator to the basic ordering number, to get the complete ordering number xample: Reducing bushing with " male NPT thread, " female NPT thread and 36 stainless steel the complete ordering number is SS-PR-NS8-NS4 Note: Dimensions in mm unless otherwise specified. Dimensions for reference only, subject to change 2 www.fitok.net

www.fitok.net 3 Pipe Plug /6 -PP-NS -PP-NS2 -PP-NS4 -PP-NS6 -PP-NS8 -PP-NS2 -PP-NS6 3.7 9.8 24.6 26.9 3.8 7.9. 4.3 7.5 /6 -P -P2 -P4 -P6 -P8 -P2 -P6 3.7 9.8 24.6 26.9 3.8 7.9. 4.3 7.5 -PP-RS2 -PP-RS4 -PP-RS6 -PP-RS8 -PP-RS2 -PP-RS6 4.0 9.8 9.8 25. 28.7 30.7 4.3 4.3 7..2.2 5.7 8.3 P-RS 3.7 8.0 2.6 25.9 32.0 38.9 D 7/6-20 9/6-8 -6 /6-2 5/6-2 -PP-ST7 -PP-ST9 -PP-ST2 -PP-ST7 -PP-ST2 9.3 20.8 22.6 28.4 30.0 4.3 7.5 3.8 38. 9..2 P-SA/MS

Hollow Hex Plug D /6 -PI-NS -PI-NS2 -PI-NS4 -PI-NS6 -PI-NS8 -PI-NS2 0.4 0.4 5.5 5.5 9.3 9.8 4.0 6.4 7.9 9.5 4.3 7.4 7.4 2.4 2.4 6.2 6.7 7.4 9.4 2. 5.7 9.3 D /6 -PI-RT -PI-RT2 -PI-RT4 -PI-RT6 -PI-RT8 -PI-RT2 0.4 0.4 5.5 5.5 9.3 9.8 4.0 6.4 7.9 9.5 4.3 7.4 7.4 2.4 2.4 6.2 6.7 7.4 9.4 2. 5.7 9.3 4 www.fitok.net

Close Nipple www.fitok.net 5 /6 -PCN-NS -PCN-NS2 -PCN-NS4 -PCN-NS6 -PCN-NS8 -PCN-NS2 -PCN-NS6 28.4 28.4 38. 38. 47.8 7..9 5.7 Number L D /6 -PCN-RT -PCN-RT2 -PCN-RT4 -PCN-RT6 -PCN-RT8 -PCN-RT2 -PCN-RT6 28.4 28.4 38. 38. 47.8 7..9 5.7 Number L D 7.9 0.3 3.7 7. 2.3 26.7 33.4 7.9 0.3 3.7 7. 2.3 26.7 33.4 -PSN-NS2-38. -PSN-NS2- -PSN-NS2-63.5 -PSN-NS2- -PSN-NS4-38. -PSN-NS4- -PSN-NS4-63.5 -PSN-NS4- -PSN-NS4-0.6 -PSN-NS6-38. -PSN-NS6- -PSN-NS6-63.5 -PSN-NS6- -PSN-NS6-0.6 -PSN-NS8- -PSN-NS8- -PSN-NS8-0.6 -PSN-NS8-52.4 -PSN-NS2- -PSN-NS2- -PSN-NS2-0.6 -PSN-NS6- -PSN-NS6-0.6 38. 63.5 38. 63.5 0.6 38. 63.5 0.6 0.6 52.4 0.6 0.6 7. 7. 7. 7. 7..9.9.9.9 5.7 5.7 5.7 Number L D 0.3 0.3 0.3 0.3 3.7 3.7 3.7 3.7 3.7 7. 7. 7. 7. 7. 2.3 2.3 2.3 2.3 26.7 26.7 26.7 33.4 33.4 Special Pipe Nipple

Hex Nipple /6 -PHN-NS -PHN-NS2-NS -PHN-NS2 -PHN-NS4-NS -PHN-NS4-NS2 -PHN-NS4 -PHN-NS6-NS -PHN-NS6-NS2 -PHN-NS6-NS4 -PHN-NS6 -PHN-NS8-NS2 -PHN-NS8-NS4 -PHN-NS8-NS6 -PHN-NS8 -PHN-NS2-NS2 -PHN-NS2-NS4 -PHN-NS2-NS6 -PHN-NS2-NS8 -PHN-NS2 -PHN-NS6-NS2 -PHN-NS6-NS4 -PHN-NS6-NS6 -PHN-NS6-NS8 -PHN-NS6-NS2 -PHN-NS6 -PHN-NS20-NS6 -PHN-NS20 -PHN-NS24 35.6 3.8 3.8 36.3 36.3 37.3 4.9 4.9 46.7 40.3 4.9 4.9 46.7 46.7 44.5 49.3 9.3 54. 54. 58.9 62.2 62.9 66.3 7.9.. 4.3 4.3 4.3 7.5 7.5 7.5 7.5 44.5 44.5 26.2 /6 /6 /6 /6 26.2 7. 7. 7..9 7..9 5.7 7..9 5.7 3.8 38. -PHN-RT2 -PHN-RT4 -PHN-RT6 -PHN-RT8 -PHN-RT2 -PHN-RT6 35.6 36.3 46.7 46.7 58.9. 4.3 7.5 7..9 5.7 -PHN-NS2-RT2 -PHN-NS4-RT4 -PHN-NS6-RT6 -PHN-NS8-RT8 -PHN-NS2-RT2 -PHN-NS6-RT6 35.6 36.3 46.7 46.7 58.9. 4.3 7.5 7..9 5.7 Px-RT 6 www.fitok.net Px-NPT Px-RT

www.fitok.net 7 Hex Nipple -PHN-NS2-RS2 -PHN-NS4-RS4 -PHN-NS6-RS6 -PHN-NS8-RS8 -PHN-NS2-RS2 -PHN-NS6-RS6 36.8 37.6 44.4 49.0 56.6 4.3 4.3 7..9 5.7 Px-RS 7..2.2 5.7 8.3 3.7 8.0 2.6 25.9 32.0 38.9 D -PHN-NS4-ST7 -PHN-NS6-ST9 -PHN-NS8-ST2 -PHN-NS2-ST7 -PHN-NS6-ST2 30.5 32.0 38.9 44.4 4.3 7.5 3.8 38. 5. 7. 0.7 6.7 7/6-20 9/6-8 -6 /6-2 5/6-2 Px-SA/MS.2.2 5.7 8.3 -PHN-NS4-MS8 -PHN-NS4-MS4 -PHN-NS6-MS4 -PHN-NS8-MS4 -PHN-NS4-MS4 -PHN-NS2-MS20 -PHN-NS4-MS20 -PHN-NS6-MS20 -PHN-NS8-MS20 -PHN-NS2-MS20 -PHN-NS6-MS24 -PHN-NS8-MS24 35. 34.2 34.2 39. 35.2 32.7 37.2 37.2 42.0 42. 38.2 43.5 9.0 9.0 9.0 3.2 7.0 7.0 7.0 7. 5.0 7.0 9.5 0.0 0.0 9.5.9 M8X M4X.5 M4X.5 M4X.5 M6X.5 M20X.5 M20X.5 M20X.5 M20X.5 M20X.5 M24X.5 M24X.5 Px-Metric 9.0 4.0 6.0 6.0 6.0 6.0 6.0 7.0 7.0 -PHN-RT4-MS2 -PHN-RT2-MS20 -PHN-RT4-MS20 -PHN-RT6-MS20 -PHN-RT8-MS20 36.2 32.7 37.2 37.2 42.0 9.0 5.0 5.0 7.0 9.5 0.0 M2X.5 M20X.5 M20X.5 M20X.5 M20X.5 Px-Metric 6.0 6.0 6.0 6.0

Hex Nipple 8 www.fitok.net -PHN-RS4-MS8 -PHN-RS2-MS20 -PHN-RS4-MS20 -PHN-RS6-MS20 -PHN-RS8-MS20 34.2 30. 36.2 36.2 40.2 5.9 4.0 5.9 7.9.9 P-RS M8X.5 M20X.5 M20X.5 M20X.5 M20X.5 Px-Metric.2 7..2.2 6.0 6.0 6.0 6.0 8.0 3.7 8.0 2.6 25.9 D M20X.5 M20X.5 M20X.5 M20X.5 M20X.5 M27X2 -PHN-MS20-MS0 -PHN-MS20-MS2 -PHN-MS20-MS4 -PHN-MS20-MS6 -PHN-MS20 -PHN-MS27 34.0 35.0 36.0 37.0 39.0 44.5 3.8 6.0 6.0 6.0 6.0 6.0 8.0 M0X M2X.5 M4X.5 M6X.5 M20X.5 M27X2.0 2.0 4.0 6.0 8.0 4.0 6.0 8.0 9.0 0.0 4.0 Px-Metric P-Metric

www.fitok.net 9 Hex Long Nipple -PLN-NS2-38. -PLN-NS2- -PLN-NS2-63.5 -PLN-NS2- -PLN-NS4-38. -PLN-NS4- -PLN-NS4-63.5 -PLN-NS4- -PLN-NS4-0.6 -PLN-NS6-38. -PLN-NS6- -PLN-NS6-63.5 -PLN-NS6- -PLN-NS6-0.6 -PLN-NS8- -PLN-NS8- -PLN-NS8-0.6 -PLN-NS8-52.4 -PLN-NS2- -PLN-NS2- -PLN-NS2-0.6 -PLN-NS6- -PLN-NS6-0.6 38. 63.5 38. 63.5 0.6 38. 63.5 0.6 0.6 52.4 0.6 0.6.... 4.3 4.3 4.3 4.3 4.3 7.5 7.5 7.5 7.5 7.5 7. 7. 7. 7. 7..9.9.9.9 5.7 5.7 5.7

Reducing ushing 0 www.fitok.net -PR-NS2-NS -PR-NS4-NS -PR-NS4-NS2 -PR-NS6-NS -PR-NS6-NS2 -PR-NS6-NS4 -PR-NS8-NS2 -PR-NS8-NS4 -PR-NS8-NS6 -PR-NS2-NS2 -PR-NS2-NS4 -PR-NS2-NS6 -PR-NS2-NS8 -PR-NS6-NS2 -PR-NS6-NS4 -PR-NS6-NS6 -PR-NS6-NS8 -PR-NS6-NS2 -PR-NS20-NS2 -PR-NS20-NS6 -PR-NS24-NS6 -PR-NS24-NS20 26.2 2.8 26.9 2.8 2.8 30.2 27.4 27.4 35.8 27.4 27.4 27.4 4.4 3 3 3 3 47.0 37.3 56.9 40.4 59.2. 4.3 4.3 7.5 7.5 44.5 44.5 7.7.4.9.4 5.7.4 8.5 28. 28. 36.3 /6 /6 /6 Px-NPT 26.2 26.2 0.4 0.4 0.4 0.4 9.8 0.4 9.8 -PR-RT4-RT2 -PR-RT6-RT4 -PR-RT8-RT4 -PR-RT8-RT6 26.9 30.2 27.4 35.8 4.3 7.7.4.9 Px-RT 0.4

Pipe Cap /6 -PC-NS -PC-NS2 -PC-NS4 -PC-NS6 -PC-NS8 -PC-NS2 -PC-NS6 2.7 23. 26.2 34.0 36.6 4.. 4.3 4.3 0.4 9.8 /6 -PC-RT -PC-RT2 -PC-RT4 -PC-RT6 -PC-RT8 -PC-RT2 -PC-RT6 2.7 23. 26.2 34.0 36.6 4.. 4.3 4.3 0.4 9.8 www.fitok.net

Hex Coupling 2 www.fitok.net /6 -PCG-NS -PCG-NS2 -PCG-NS4-NS2 -PCG-NS4 -PCG-NS6-NS4 -PCG-NS6 -PCG-NS8-NS2 -PCG-NS8-NS4 -PCG-NS8-NS6 -PCG-NS8 -PCG-NS2-NS4 -PCG-NS2-NS8 -PCG-NS2 -PCG-NS6-NS8 -PCG-NS6-NS2 -PCG-NS6 30.2 35. 39.6 44.4 45.2 39.6 46.0 52.3 4. 55.6 57.2 4.3 4.3 4.3 4.3 4.3 /6.4.4.4 8.5.4 8.5 8.5 2 -PCG-RT2 -PCG-RT4 -PCG-RT6-RT4 -PCG-RT6 -PCG-RT8-RT4 -PCG-RT8-RT6 -PCG-RT8 30.2 35. 44.4 45.2 39.6 4.3.4.4.4 8.5 Px-NPT Px-RT

Union all Joints Fx -UJ-NS2 -UJ-NS4 -UJ-NS6 -UJ-NS8 -UJ-NS2 -UJ-NS6 46.0 59.4 63.5 68.3 79.2 90.4 23.8 30.2 4.3 47.6 60.3 2 38. 44.5 54.0 63.5 0.4 9.8 6.8 9. 3.2 5.7 26.2 www.fitok.net 3

Adaper 4 www.fitok.net -PA-NS2-NS -PA-NS2 -PA-NS4-NS -PA-NS4-NS2 -PA-NS4 -PA-NS6-NS -PA-NS6-NS2 -PA-NS6-NS4 -PA-NS6 -PA-NS8-NS2 -PA-NS8-NS4 -PA-NS8-NS6 -PA-NS8 -PA-NS2-NS2 -PA-NS2-NS4 -PA-NS2-NS6 -PA-NS2-NS8 -PA-NS2 -PA-NS6-NS2 -PA-NS6-NS4 -PA-NS6-NS6 -PA-NS6-NS8 -PA-NS6-NS2 -PA-NS6 -PA-NS20-NS6 27.9 32.0 32.0 35.6 3.8 33.8 38. 38.4 40. 44.4 44.7 49.3 39.6 46.2 46.2 5.3 5.3 46.0 49.8 50.9 54.9 55. 57.9 62.7 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 54.0 0.4 0.4 9.8 9.8 9.8 9.8 7. 7. 7..9 7..9 5.7 7..9 5.7 /6 /6 /6 Px-NPT -PA-NS2-RT2 -PA-NS4-RT4 -PA-NS6-RT6 -PA-NS8-RT8 -PA-NS2-RT2 -PA-NS6-RT6 27.9 35.6 38.4 49.3 5.3 57.9 4.3 4.3 0.4 9.8 7..9 5.7 Px-RT -PA-NS2-RS2 -PA-NS4-RS4 -PA-NS6-RS6 -PA-NS8-RS8 -PA-NS2-RS2 -PA-NS6-RS6 25. 33.5 35.8 44.2 48.0 53.3 4.3 4.3 0.4 7..2.2 5.7 8.3 4. 5.8 7.9.9 5.7 9.8 Px-RS 3.7 8.0 2.6 25.9 32.0 38.9 D

www.fitok.net 5 Adaper -PA-RT2 -PA-RT4-RT2 -PA-RT4 -PA-RT6-RT4 -PA-RT6 -PA-RT8-RT4 -PA-RT8-RT6 -PA-RT8 -PA-RT2 -PA-RT6 27.9 32.0 35.6 38. 38.4 44.7 44.4 49.3 5.3 57.9 4.3 4.3 0.4 9.8 9.8 9.8 7. 7. 7..9 5.7 Px-RT -PA-RT2-NS2 -PA-RT4-NS4 -PA-RT6-NS6 -PA-RT8-NS8 -PA-RT2-NS2 -PA-RT6-NS6 27.9 35.6 38.4 49.3 5.3 57.9 4.3 4.3 0.4 9.8 7..9 5.7 Px-NPT -PA-NS4-ST7 -PA-NS6-ST9 -PA-NS8-ST2 -PA-NS2-ST7 -PA-NS6-ST2 33.5 35.3 44.7 50.5 53.8 23.8 4.3 9.8 9..2 5. 7. 0.7 6.7 7/6-20 9/6-8 -6 /6-2 5/6-2 Px-SA/MS -PA-RG4-NS4 -PA-RG6-NS6 -PA-RG8-NS8 30.2 32.2 42.7 23.8.2.2 P-RG 5.6 6.6 7. Px-NPT

Male lbow 6 www.fitok.net /6 -PM-NS -PM-NS2 -PM-NS4 -PM-NS6 -PM-NS8 -PM-NS2 -PM-NS6 8.3 9.3 37.3 40.4 50.0 9.5. 4.3 7..9 5.7 Street lbow /6 /6 /6 /6 -PS-NS -PS-NS-NS2 -PS-NS-NS4 -PS-NS-NS6 -PS-NS2-NS -PS-NS2 -PS-NS2-NS4 -PS-NS2-NS6 -PS-NS2-NS8 -PS-NS2-NS2 -PS-NS2-NS6 -PS-NS4-NS2 -PS-NS4 -PS-NS4-NS6 -PS-NS4-NS8 -PS-NS4-NS2 -PS-NS4-NS6 -PS-NS6-NS4 -PS-NS6 -PS-NS6-NS8 -PS-NS6-NS2 -PS-NS6-NS6 -PS-NS8-NS4 -PS-NS8-NS6 -PS-NS8 -PS-NS8-NS2 -PS-NS8-NS6 -PS-NS2 -PS-NS2-NS6 -PS-NS6 -PS-NS20 6.8 6.8 6.8 6.8 6.8 6.8 24. 4.4 24. 4.4 3.2 38. 3.2 3.2 3.2 3.2 4.4 34.5 34.5 4.4 43.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3 47.6 0.4 0.4 0.4 0.4 0.4 0.4 0.4 9.8 9.8 9.8 9.8 9.8 8.3 9.8 22. 22. 37.3 40.4 50.0 2 37.3 40.4 50.0 32.0 37.3 40.4 50.0 35. 35. 37.3 40.4 50.0 40.4 50.0 50.0 60.5 Lx 7. 7..9 7.4.9 7.4.9 5.7 8.5 5.7 3.8 /6 /6 Px-NPT

Female lbow www.fitok.net 7 /6 -P-NS -P-NS2-NS -P-NS2 -P-NS4-NS2 -P-NS4 -P-NS6 -P-NS8 -P-NS2 -P-NS6 -P-NS20 -P-NS24 2.7 6.8 6.8 3.2 34.5 4.4 43.2 52.8. 4.3 4.3 33.5 4.3 47.6 63.5 /6 /6 0.4 0.4 9.8.4 8.5 2 37.2 43.3 2.7 6.8 6.8 3.2 34.5 4.4 43.2 52.8 Lx 0.4 0.4 9.8-4 -6-8 3.2 9.8.4 8.5 3.2 Lx 9.8 Px-NPT Px-RT

8 www.fitok.net /6 -PMT-NS -PMT-NS2 -PMT-NS4 -PMT-NS6 -PMT-NS8 -PMT-NS2 -PMT-NS6 -PMT-NS20 -PMT-NS24 8.3 9.3 37.3 40.4 50.0 56.3 67. 9.5. 4.3 4.3 47.6 7..9 5.7 3.8 38. 26.2 Male Tee Male Street Tee /6 -PST-NS -PST-NS2 -PST-NS4 -PST-NS6 -PST-NS8 -PST-NS2 -PST-NS6 2.7 6.8 3.2 34.5 4.4. 4.3 33.5 4.3 7..9 5.7 0.4 9.8 8.3 9.8 37.3 40.4 50.0 Lx /6 -PT-NS -PT-NS2 -PT-NS4 -PT-NS6 -PT-NS8 -PT-NS2 -PT-NS6 2.7 6.8 3.2 34.5 4.4. 4.3 33.5 4.3 7..9 5.7 0.4 9.8 8.3 9.8 37.3 40.4 50.0 Lx Male ranch Tee

www.fitok.net 9 Female Tee /6 -PT-NS -PT-NS2 -PT-NS4 -PT-NS6 -PT-NS8 -PT-NS2 -PT-NS6 -PT-NS20 -PT-NS24 2.7 6.8 3.2 34.5 4.4 43.2 52.8. 4.3 33.5 4.3 47.6 63.5.4 8.5 2 37.2 43.3 0.4 9.8 -PT-T4 -PT-T6 -PT-T8 3.2.4 8.5 9.8 Female Cross /6 -PCR-NS -PCR-NS2 -PCR-NS4 -PCR-NS6 -PCR-NS8 -PCR-NS2 -PCR-NS6 2.7 6.8 3.2 34.5 4.4. 4.3 33.5 4.3.4 8.5 2 0.4 9.8