Disc Valve Hydraulic Motors 2000 Series

Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english

Highlights Port A Features Three zone design for longer life and true bi-directionality. Geroler Star Bearings that meet the highest standards of the industry Options to optimize performance in every application Integrated cross-over relief valve option Benefits Disc Valve Easy to design in a system Motor Shaft and Bearings Motor Shaft Drive and Valve Drive Reliablity and performance in tough application Compact design of the integrated cross-over relief valve option Description The popular provides torque up to 7500 lb-in. This proven design is reliable and durable. Eaton has added options that make the motor more flexible to use in a wide variety of applications. The integral cross-over relief valve is the latest innovation in the 2000 series motors. Geroler Element Flow l/min [GPM] Speed RPM Pressure bar [PSI] Torque Nm [lb-in] 10 Displacements 75 [20] Continuous** 1 [] Intermittent* 908 Cont.** 1042 Inter.* 200 [00] Cont.** 0 [00] Inter.* 8 [74] Cont.** 9 [8225] Inter.* ** Continuous (Cont.) Continuous rating, motor may be run continuously at these ratings. * Intermittent (Inter.) Intermittent operation, 10% of every minute. Applications Skid Steer Attachments Swing Motor Brush Cutters & Mowers Harvesting Equipment Directional Boring any place pressure relief protection is optimal for system or motor performance and life Turf equipment 2

Specifications SPECIFICATION DATA 2000 SERIES MOTORS Displ. cm3/r [in3/r] 80 [4.9] 90 [5.5] 100 [6.2] 1 [8.0] 160 [9.6] 195 [11.9] 2 14.9] 5 [18.7] 395 [24.0] 490 [29.8] Max. Speed Continuous 908 836 742 576 477 385 8 246 191 3 (RPM) Intermittent 908 1042 924 720 713 577 462 365 287 2 @ Flow Flow Continuous 75 [20] 75 [20] 75 [20] 75 [20] 75 [20] 75 [20] 75 [20] 75 [20] 75 [20] 75 [20] l/min [GPM] Intermittent 75 [20] 95 [25] 95 [25] 95 [25] 1 [] 1 [] 1 [] 1 [] 1 [] 1 [] Torque* Continuous 2 [2065] 265 [2326] 295 [26] 385 [3420] 5 [4040] 540 [4780] 660 [5850] 765 [6750] 775 [6840] 8 [74] Nm [lb-in] Intermittent 3 [] 390 [38] 4 [3950] 560 [49] 5 [5040] 665 [5890] 820 [7250] 885 [7820] 925 [81] 9 [8225] Pressure Continuous 205 [00] 205 [00] 205 [00] 205 [00] 205 [00] 205 [00] 205 [00] 205 [00] 5 [2250] 120 [1750] bar Intermittent 310 [00] 310 [00] 310 [00] 310 [00] 260 [3750] 260 [3750] 260 [3750] 260 [30] 1 [2750] [2000] [ PSI] Peak 310 [00] 310 [00] 310 [00] 310 [00] 310 [00] 310 [00] 310 [00] 310 [00] 205 [3250] 1 [2500] Weight Standard or 9.3 [20.5] 9.3 [20.5] 9.5 [21.0] 9.8 [21.5] 10.0 [22.0] 10.4 [23.0] 10.9 [24.0] 11.3 [25.0] 11.8 [26.0] 12.2 [27.0] kg [lb] Wheel Mount Bearingless 7.3 [16.0] 7.3 [16.0] 7.5 [16.5] 7.7 [17.0] 7.9 [17.5] 8.4 [18.5] 8.8 [18.5] 9.3 [20.5] 9.8 [21.5] 10.2 [22.5] Maximum Case Pressure: See case pressure seal limitation graph. *See shaft torque ratings for limitations. Note: To assure best motor life, run motor for approximately one hour at % of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Maximum Inlet Pressure: 310 bar [00 PSI] Do not exceed pressure rating (see chart above). Maximum Return Pressure: 310 bar [00 PSI] with case drain line installed. Do not exceed pressure rating (see chart above). bar [ PSI] : The true pressure difference between inlet port and outlet port Continuous Rating: Motor may be run continuously at these ratings Intermittent Operation: 10% of every minute Peak Operation: 1% of every minute Recommended Fluids: Premium quality, anti-wear type hydraulic oil with a viscosity of not less than SUS at operating temperature. Recommended Maximum System Operating Temp.: 82 C [180 F] Recommended Filtration: per ISO Cleanliness Code, 4406: 20/18/13 3

Performance Data Motors run with high efficiency in all areas designated with a number for torque and speed. For best motor life select a motor to run with a torque and speed range shown in the light shaded area. Performance data is typical at 120 SUS. Actual data may vary slightly from unit to unit in production. Flow LPM [GPM] Continuous Intermittent [.25],95 [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [25] 95 [250] [124] 14 5 [133] [1] 17 39 [1] 17 82 [1] 17 167 [142] 16 250 [133] [124] 14 418 [106] 12 502 [98] 11 585 [80] 9 6 [62] 7 753 [53] 6 836 [] 4 920 [18] 2 1003 [500] [233] 26 2 [1000] [471] 53 1 90 cm 3 /r [5.5 in 3 /r] [00] 105 [2000] [2500] [00] [00] 1 205 240 [273] [555] [832] 31 63 94 13 6 2 [8] [744] [1091] [1424] [1697] [1952] [2189] [2368] 40 84 123 161 192 221 247 268 39 32 28 21 13 12 2 [8] [744] [1099] [1439] [1737] [20] [2293] [25] 40 80 84 76 124 72 163 68 196 61 228 50 259 38 290 29 [0] [899] [1113] [1473] [1800] [2132] [24] [2775] 40 102 126 166 203 241 277 314 163 8 2 148 139 126 1 102 [348] [736] [613] [1492] [1851] [2208] [2552] [2898] 39 83 69 169 209 249 288 327 2 240 233 227 218 203 191 176 [338] [729] [1128] [09] [1890] [2269] [26] [00] 38 82 127 1 214 256 298 339 328 329 314 6 295 281 266 249 [331] [724] [11] [21] [1912] [29] [26] [36] 37 82 128 172 216 261 2 343 410 404 395 385 373 361 342 322 [3] [714] [1127] [25] [1924] [2326] [24] [82] 36 81 127 172 217 263 6 348 493 485 477 464 1 441 417 394 [298] [6] [11] [25] [1924] [2326] [27] [80] 34 80 126 172 217 263 6 348 575 567 559 543 529 521 493 467 [285] [688] [1107] [10] [1907] [2311] [2697] [] 32 78 125 171 2 261 5 347 658 650 641 622 607 610 568 541 [262] [673] [1087] [1490] [1892] [2281] [2662] [] 76 123 168 214 258 1 342 740 732 719 1 685 680 643 613 [242] [644] [10] [1447] [1850] [2246] [2617] [2988] 27 73 118 163 209 254 296 338 822 814 796 780 765 748 719 686 [231] [639] [1047] [1437] [1836] [2218] [2599] [2981] 26 72 118 162 207 251 294 337 916 907 895 876 854 749 803 774 [204] [612] [1011] [1366] [1792] [2182] [2573] [2963] 23 69 114 4 202 247 291 3 1000 991 978 960 940 918 882 850 [1384] [1765] [2173] [195] 22 1042 [594] 67 1033 Peak No Operation [994] 112 1020 6 1003 199 984 246 954 [2564] 290 921 [4000] [00] 275 310 [2855] 323 20 [3100] 0 90 [3249] 367 161 [3367] 380 231 [3398] 384 2 [38] 391 372 [] 390 431 [3432] 388 513 [3381] 382 583 [31] 373 653 Flow LPM [GPM] [.25],95 [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [500] [210] 25 3 [250] 17 [3] 44 [3] 90 [325] 182 [320] 273 [310] 365 [0] 6 [285] 547 [2] 638 [255] 729 [2] 25 818 [210] 25 908 [1000] [420] 1 [500] 50 8 [6] 75 40 [6] 75 85 [6] 75 176 [665] 75 267 [660] 75 375 [650] 75 448 [640] 537 [625] 629 [610] 720 [590] 65 810 [5] 65 901 [00] 105 [740] 85 3 [990] 110 37 [995] 110 81 [1005] 1 1 [1010] 1 259 [10] 1 349 [5] Torque [lb-in] 65 } Nm 901 Speed RPM 80 cm 3 /r [4.9 in 3 /r] [2000] [2500] [00] [00] 1 205 240 [10] [50] [1800] [1950] 1 34 175 28 205 22 220 14 [1310] [80][[1840] [2100] [2365] 0 78 180 72 210 65 2 57 265 49 [13] [1620] [1920] [2200] [2480] 0 166 185 9 2 2 250 280 128 [1340] [1655] [1975] [22] [25] 0 254 185 246 225 238 255 223 290 207 [13] [1685] [2020] [23] [2640] 0 341 190 333 2 325 265 6 0 286 [1010] [10] [10] [2050] [23] [2690] 1 439 5 429 190 420 2 411 2 388 5 364 [1005] [10] [15] [2065] [2390] [27] 1 5 195 2 2 5 5 516 507 497 4 442 [990] [1340] [15] [2065] [2395] [2720] 110 0 195 2 2 5 622 603 593 584 553 521 [975] [13] [1690] [2055] [2385] [20] 110 0 190 2 2 5 714 689 679 6 6 599 [1310] [1680] [2025] [25] [2660] [955] 110 795 0 775 190 765 2 756 265 717 [4000] [00] 275 310 [2110] 240 2 0 677 [26] 295 42 [2765] 310 117 [2880] 325 192 [2960] 3 266 [10] 340 341 [] 3 4 [] 340 490 [2995] 340 564 [29] 3 638 [9] [1290] [16] [1985] [25] [2600] [28] 105 880 1 861 185 851 225 842 260 799 295 755 320 712 4

Performance Data Motors run with high efficiency in all areas designated with a number for torque and speed. For best motor life select a motor to run with a torque and speed range shown in the light shaded area. Performance data is typical at 120 SUS. Actual data may vary slightly from unit to unit in production. Flow LPM [GPM] Continuous Intermittent [.25],95 [.5] 1,9 [1] 3,8 [2] 7.5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [25] [250] [1] 20 3 [190] 20 12 [2] 25 28 [2] 25 56 [220] 25 114 [220] 25 172 [200] 25 2 [180] 20 287 [160] 20 3 [0] 403 [1] 461 [110] 10 518 [90] 10 576 [60] 5 634 [40] 5 692 [20] 1,0 [500] [410] 8 [1000] [8] 100 2 Peak No Operation 1 cm 3 /r [8.0 in 3 /r] Pressure Bar [PSI] [00] 105 [2000] [2500] [00] [00] [4000] 1 205 240 275 [510] [10] [80] [2050] [2520] [2920] 60 27 120 23 180 19 2 16 285 13 3 9 [510] [1080] [1600] [2090] [2580] [29] [3320] [3640] 60 56 120 53 180 47 2 42 290 39 3 36 375 28 410 21 [500] [1080] [1620] [20] [2660] [3100] [40] [3980] 55 113 120 111 185 104 2 97 0 95 0 92 400 85 0 77 [490] [1080] [1640] [2190] [2740] [3260] [37] [4280] 55 171 120 169 185 161 2 3 310 149 3 146 425 132 485 118 [480] [1080] [1650] [2220] [2780] [3310] [3840] [4360] 55 224 120 222 185 219 250 210 3 204 375 201 4 192 [4] [10] [1650] [22] [2800] [3420] [3940] [40] 55 286 120 282 185 276 250 269 3 261 385 255 4 243 505 231 [460] [1060] [1640] [22] [2800] [] [3910] [4440] 50 120 185 250 3 380 440 500 344 338 333 327 317 7 295 284 [440] [10] [1620] [2220] [00] [] [3910] [4440] 50 1 185 250 340 380 440 500 402 395 391 385 373 360 348 336 [420] [1010] [1600] [2200] [2780] [33] [3890] [4440] 1 180 250 3 375 440 500 460 2 447 443 4 411 397 384 [400] [990] [80] [2160] [2750] [30] [3860] [4410] 110 180 2 310 375 4 500 517 509 504 500 484 471 6 440 [380] [960] [50] [21] [2710] [3280] 575 110 568 175 560 240 551 5 539 3 524 [0] [940] [20] [2100] [2680] [3250] 40 105 1 2 5 365 633 624 619 604 597 579 [325] [920] [1490] [20] [2650] [3220] 105 1 2 0 365 691 682 676 665 651 633 [310] [900] 100 [1480] 165 [2050] [26] [3200] 2 295 360 [3310] 375 3 [3840] 4 508 [3820] 4 560 [3780] 425 616 [30] 420 495 184 [00] 310 [3990] 0 13 [4420] 500 [4800] 540 104 [4890] 550 175 [49] 560 219 [4960] 560 272 Flow LPM [GPM] [.25],95 [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [25] 95 [0] 13 [1] 20 [1] 20 73 [1] 20 148 [160] 20 222 [0] 297 [] 371 [120] 4 [110] 10 519 [90] 10 594 [] 10 668 [60] 5 742 [40] 5 816 [20] 1,0 890 [390] 71 [380] 1 [380] 219 [3] 40 294 100 cm 3 /r [6.2 in 3 /r] Pressure Bar [PSI] [250] [500] [1000] [00] 105 [2000] [2500] [00] [00] 1 205 240 [] 4 [260] 2 [0] [620] [940] 105 9 5 2 [8] [1210] [390] 34 [368] 40 367 [0] 40 442 [3] 516 [320] 591 [0] 665 [280] 739 [260] 813 [2] 2 887 [220] 25 924 95 31 1 28 [] 175 23 [18] 210 [21] 240 6 [4000] 275 [00] 310 [8] [1220] [90] [1920] [2220] [2520] [2810] 95 68 63 180 59 2 51 250 38 285 24 3 14 [820] [1240] [1640] [2010] [2380] [2750] [3120] 90 185 225 2 310 5 141 136 131 121 104 94 80 [820] [1260] [16] [2080] [2480] [2880] [3280] 90 2 209 190 202 2 192 280 172 325 163 3 149 [810] [1260] [10] [21] [2560] [2990] [3420] 90 190 240 290 340 385 288 281 273 261 243 231 216 [810] [12] [1720] [2160] [2610] [20] [3440] 90 362 1 4 195 344 2 3 295 316 340 0 390 283 [800] [12] [17] [2180] [26] [] [10] 90 1 195 2 295 3 395 436 427 4 399 389 369 0 [800] [1260] [1740] [2180] [26] [] [00] 90 195 2 295 3 395 509 500 486 469 463 437 417 [780] [1260] [1720] [2160] [2610] [60] [00] 90 195 2 295 3 395 583 573 558 540 537 506 485 [7] [1240] [10] [2] [2580] [20] [3460] 85 190 240 290 340 390 657 646 6 611 609 574 552 [7] [1180] [16] [2090] [2550] [2980] [3440] 80 731 1 7 185 3 2 684 290 662 3 643 390 619 [720] [1180] [1620] [20] [2500] [29] [3360] 80 1 185 2 280 3 380 805 794 777 758 749 712 687 [690] [1] [40] [2020] [2460] [2900] [3340] 80 1 175 2 280 3 375 879 868 852 834 814 782 754 [6] [1120] [60] [1990] [20] [2890] 75 125 175 225 275 325 916 905 890 873 846 817 [60] Torque [lb-in] 175 } Nm 890 Speed RPM [3120] 5 4 [3490] 395 69 [3680] 4 134 [3840] 4 200 [3850] 4 266 [3950] 4 332 [3940] 4 378 [3940] 4 463 [3900] 440 529 [38] 4 595 5

6 >> [0] 46 [610] [1210] 1 42 [1790] 200 39 [20] 265 [2920] 3 34 [320] 93 [6] 92 [1260] 89 [1890] 2 85 [25] 285 79 [31] 360 77 [320] 142 [650] 75 [10] 1 137 [1960] 220 131 [2620] 295 124 [3280] 3 118 [650] 75 187 [13] 0 184 [2010] 225 178 [26] 0 1 [33] 375 166 [250] [500] [1000] [00] 105 [2000] [2500] 1 [2] 7.5 [4] [6] 23 [8] Pressure Bar [PSI] 160 cm 3 /r [9.6 in 3 /r] [3480] 395 33 [3820] 4 75 [3940] 4 113 [4000] 0 164 [00] 205 [200] 25 3 [240] 25 9 [490] 55 7 [990] 110 5 [] 175 3 [2] 240 1 [280] 23 [590] 65 21 [11] 1 19 [17] 195 17 [2290] 260 13 [28] 320 8 [.25],95 [.5] 1,9 [1] 3,8 [4050] 460 28 [4460] 505 59 [00] 240 Flow LPM [GPM] Flow LPM [GPM] Torque [lb-in] Nm } Speed RPM [3] 713 [640] 2 [1340] 0 231 [20] 2 226 [2850] 320 217 [3410] 385 212 [10] 38 [40] 5 205 [620] 283 [1320] 0 279 [20] 2 274 [20] 5 265 [33] 380 254 [12] [590] 65 331 [10] 1 326 [2020] 2 322 [2690] 5 312 [3360] 380 5 [14] 53 [5] 65 378 [12] 1 374 [1980] 225 369 [2660] 0 360 [33] 375 349 [16] 61 [540] 60 426 [1240] 422 [1960] 220 416 [2640] 0 407 [3320] 375 394 [18] 68 [510] 60 474 [1210] 1 469 [1920] 2 462 [26] 0 1 [3310] 375 440 [20] 76 [480] 55 522 [11] 1 517 [1880] 210 510 [2600] 295 501 [3290] 3 484 [22] 83 [0] 50 569 [10] 1 564 [1860] 210 556 [25] 290 546 [24] 91 [440] 50 593 [1] 1 587 [1840] 210 580 [2560] 290 566 [25] 95 [310] 190 [290] 237 [2] 286 [240] 25 334 [220] 25 382 [190] 20 429 [1] 20 477 [0] 525 [120] 572 [3] 713 [1040] 120 6 [1750] 200 696 [24] 280 682 [] 114 [3750] 260 [33] 375 3 [3820] 4 2 [40] 460 1 [4040] 5 246 [4600] 520 104 [4660] 525 3 [40] 5 193 [4710] 5 2 [43] 490 22 [4780] 540 43 [49] 560 96 [4990] 565 142 [50] 5 187 [5040] 5 224 [3260] 3 531 [32] 365 553 [3] 5 672 [40] 5 297 [4010] 5 339 [3990] 0 387 [3940] 4 4 [3920] 4 473 [3900] 440 522 [3880] 440 544 [3800] 4 658 [40] 5 286 [4680] 5 326 [90] 10 596 [390] 37 [755] 85 [11] 1 34 [14] 165 33 [1860] 210 32 [2195] 250 31 [405] 76 [795] 90 74 [1185] 1 73 [40] 175 72 [19] 225 71 [2310] 260 [405] 1 [8] 90 113 [1220] 111 [90] 180 110 [20] 2 109 [2395] 2 108 [820] 90 1 [12] 149 [1625] 185 148 [2065] 2 147 [20] 275 146 [250] [500] [750] 50 [1000] [1250] 85 [00] 105 [4] [6] 23 [8] [10] 38 Pressure Bar [PSI] 195 cm 3 /r [11.9 in 3 /r] [25] 285 28 [2675] 0 66 [2780] 3 104 [2850] 320 143 [1750] 120 [240] 25 4 [590] 65 2 [290] 8 [640] 6 [990] 110 5 [1340] 0 2 [380] 17 [7] 80 16 [1100] 125 [14] 160 14 [1790] 200 13 [2120] 200 11 [.5] 1,9 [1] 3,8 [2] 7,5 [20] 275 9 [2880] 325 26 [40] 3 64 [31] 360 102 [3260] 3 [2000] [2720] 5 7 [3120] 5 24 [3420] 385 62 [2250] 5 [2990] 340 5 [3680] 4 21 [810] 95 190 [12] 188 [16] 185 187 [2095] 2 186 [2480] 280 184 [12] [2895] 325 181 [2500] 1 [790] 90 229 [12] 1 227 [1650] 185 226 [2100] 2 224 [2485] 280 221 [14] 53 [29] 3 219 [765] 85 267 [1190] 1 267 [16] 185 264 [2090] 2 261 [2475] 280 260 [16] 61 [690] 80 3 [1120] 125 3 [90] 180 342 [20] 2 337 [2420] 2 334 [18] 68 [650] 75 384 [1080] 120 383 [50] 175 380 [1995] 225 375 [2380] 2 372 [20] 76 [610] 423 [1040] 120 422 [00] 1 418 [1955] 220 414 [2340] 265 410 [24] 91 [25] 95 [1000] 1 460 [1440] 165 7 [] 114 [1410] 160 476 [400] 4 [380] 193 [5] 40 231 [320] 269 [290] 346 [210] 25 385 [1] 20 424 [3260] 3 4 [40] 400 3 [1890] 2 473 [1910] 2 3 [2280] 260 469 [20] 260 449 [29] 3 257 [28] 325 333 [3310] 375 177 [22] 83 [5] 65 461 [980] 110 479 [3790] 4 61 [2750] 190 [1] 462 [550] 60 482 [00] 510 19 [20] 510 57 [40] 5 94 [4780] 540 1 [00] 205 [3810] 4 2 [4800] 540 17 [4890] 550 55 [3250] 225 [4080] 460 2 [5100] 575 14 [00] 240 [40] 490 1 [4620] 520 1 [5260] 595 51 [3750] 260 [4090] 460 20 [4160] 4 59 [5400] 610 14 [50] 5 91 [60] 400 100 [36] 4 137 [3940] 4 99 [4040] 5 1 [4320] 490 96 [4410] 500 132 [37] 420 175 [4100] 465 173 [44] 505 1 [3340] 375 218 [3760] 425 2 [4120] 465 211 [] 380 254 [37] 425 250 [3310] 375 327 [37] 420 321 [41] 465 248 [4100] 465 3 [28] 320 371 [2785] 3 408 [2740] 310 446 [32] 3 367 [3220] 365 404 [31] 360 441 [3690] 4 363 [3640] 410 399 [90] 405 436 [2720] 5 464 [] 5 9 [.25],95 [1290] 1 571 [10] 190 567 [2120] 240 562 [860] 95 575 [420] 577 [25] 285 556 [2940] 3 550 [120] 484 [] 405 4 [3400] 385 542 [3980] 0 432 [3960] 4 449 [40] 460 9 [4050] 460 395 [40] 500 5 [4480] 505 208 [4480] 505 2 [4480] 505 8 [4850] 550 204 [4860] 550 241 [4860] 550 276 [5520] 625 123 [50] 580 127 [4840] 5 168 [5210] 590 164 [5890] 665 117 [5590] 6 160 [50] 6 87 [56] 6 [58] 660 81 [7] 80 6 [1160] 1 5 [1625] 185 3 [20] 2 299 [25] 275 296 [290] 8 [2900] 3 294 [3340] 375 290 [3760] 425 286 [41] 465 283 [4490] 505 279 Performance Data Motors run with high efficiency in all areas designated with a number for torque and speed. For best motor life select a motor to run with a torque and speed range shown in the light shaded area. Performance data is typical at 120 SUS. Actual data may vary slightly from unit to unit in production. Continuous Intermittent Peak No Operation

Performance Data Motors run with high efficiency in all areas designated with a number for torque and speed. For best motor life select a motor to run with a torque and speed range shown in the light shaded area. Performance data is typical at 120 SUS. Actual data may vary slightly from unit to unit in production. Flow LPM [GPM] [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [25] 95 [] 114 Continuous Intermittent [250] [500] [750] 50 5 cm 3 /r [18.7 in 3 /r] [1000] [1250] 85 Flow LPM [GPM] [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [25] 95 [] 114 [00] [1750] [2000] [2250] [2500] 105 120 5 1 [410] 4 [850] 95 2 [0] 50 14 [460] 50 29 [4] [1000] [40] [1980] 55 1 175 225 60 59 58 56 [460] [1020] [50] [2040] 50 1 175 2 91 90 89 87 [460] [1010] 50 1 122 121 [440] 50 3 [410] 184 [380] 40 2 [340] 40 246 [290] 277 [250] 8 [200] 25 339 [0] 3 [120] 385 [1000] 1 2 [500] [1050] 55 120 4 2 [610] [1180] [1750] [23] [28] [3440] [39] [4410] [4900] [5380] 1 200 260 325 390 4 500 555 610 12 11 11 10 10 9 8 6 3 1 [620] [1210] [1800] [2400] [29] [10] [4050] [4600] [5] [5680] [6220] [6750] [7290] [7820] 1 205 2 3 395 460 520 580 640 5 765 825 885 24 24 23 22 22 20 19 18 17 13 11 8 6 [680] [1250] [1880] [2500] [3120] [3690] [4260] [4840] [5410] [5980] [6550] [7120] [7690] 75 49 49 210 48 280 47 5 47 4 480 43 5 42 610 40 675 38 740 36 805 34 8 33 [620] [12] [1920] [2560] [32] [3810] [4390] [49] [5560] [61] [6710] [7290] 74 1 74 2 72 290 72 365 71 4 69 495 66 560 64 6 61 695 58 760 55 825 52 [600] [12] [1940] [2600] [3290] [3880] [44] [50] [5660] [6250] [6840] 98 1 98 220 97 295 96 3 95 440 93 505 90 575 86 640 83 5 80 775 77 [5] [1250] [1940] [2610] [3310] [3920] [] [50] [5760] [63] 65 123 122 220 121 295 120 375 119 440 117 510 113 580 110 650 106 720 102 [5] [1220] [1920] [2600] [30] [3920] [] [50] [5760] [63] 60 2 295 375 440 510 580 650 720 148 147 1 144 143 142 138 133 128 124 [480] [1180] [18] [2560] [3260] [3900] [10] [5120] 55 172 1 172 210 1 290 168 3 167 440 165 510 160 580 6 [4] [1120] [1820] [2500] [3210] [38] [4480] [5080] 50 125 205 280 365 440 505 575 196 196 194 192 191 188 183 178 [3] [1060] [1760] [2440] [3] [3800] [4420] [5050] 40 120 200 275 5 440 500 5 221 221 218 217 2 212 207 202 [320] [980] [1680] [2360] [50] [3710] [43] [5020] 110 190 265 3 420 495 565 246 2 243 241 239 236 231 226 [240] 25 271 [180] 20 296 [0] 8 Peak No Operation [920] [1620] [20] [2990] [60] [4190] 105 2 185 268 260 266 340 263 400 260 475 258 [8] [50] [2240] [2920] [3420] [4020] 100 175 255 3 385 5 294 293 290 288 285 283 [840] [20] [2200] [2890] [3340] [39] 95 1 250 325 375 4 7 5 3 0 298 295 [680] [1360] [2040] [2720] [3] [3810] 75 5 2 5 5 4 365 362 360 7 6 2 [4820] 5 255 [46] 525 280 [20] 510 293 [57] 6 2 [5690] 6 174 2 cm 3 /r [14.9 in 3 /r] [250] [500] [750] 50 [1000] [1250] 85 [00] [1750] [2000] [2250] [2500] [2750] [00] [3250] [00] [3750] 105 120 5 1 190 205 225 240 260 [9] [1420] [1850] [2320] [2780] [3250] [3650] [4100] [40] [4980] [54] [58] [6310] 105 160 210 260 3 365 410 465 5 560 6 665 7 13 12 11 10 9 8 6 5 4 4 3 2 1 [960] [1460] [1900] [2400] [2860] [3340] [3780] [4320] [47] [5210] [5660] [6110] [65] 110 165 2 2 325 375 425 490 540 590 640 690 740 28 27 26 25 23 22 20 19 18 17 14 12 [2510] [10] [3480] [3980] [40] [4910] [5380] [5850] [6320] [6780] 285 54 340 53 395 51 0 49 505 48 555 47 610 47 660 46 7 765 44 [2580] [3110] [90] [4120] [80] [5050] [5520] [5980] [6440] 290 84 0 83 405 81 465 78 5 76 5 73 625 71 675 69 7 67 [60] [2080] [26] [31] [36] [4210] [4680] [5160] [56] [6110] 175 120 2 118 295 1 360 113 4 111 475 108 5 106 585 104 6 102 690 101 [50] [2110] [2650] [3200] [37] [4250] [47] [5210] [5720] 175 0 240 148 0 146 360 144 420 142 480 139 5 137 560 1 6 133 [960] [] [2100] [2640] [3190] [3760] [4260] [4740] [5220] 110 183 175 182 2 180 0 177 360 175 425 173 480 1 5 168 600 165 [910] [00] [2080] [2600] [3160] [3760] [42] [4710] [5190] 105 1 2 295 5 425 480 5 585 214 213 211 209 207 204 201 198 195 [860] [1460] [2040] [25] [3120] [3740] [4180] [4660] [5] 95 165 2 290 5 425 4 525 580 2 244 242 240 238 2 232 227 223 [810] [1420] [2000] [2520] [60] [30] [41] [4610] [5090] 90 160 225 285 3 420 465 520 575 276 275 273 271 269 266 263 258 253 [800] [10] [1910] [2460] [10] [36] [4110] [4610] 90 5 2 280 340 410 465 520 6 4 2 0 298 295 291 288 [710] [10] [18] [2390] [2940] [60] [4010] 80 337 1 337 210 334 2 332 3 3 400 327 5 323 [6] [1240] [1790] [23] [2880] [3460] [3960] 75 200 265 325 390 4 369 367 364 362 360 7 3 [660] [1210] [1750] [20] [2860] [3410] [3950] 75 1 200 260 325 385 4 384 382 379 377 375 372 367 [520] [1080] [1620] [2180] [2720] [3260] [3790] 60 120 185 2 5 3 4 462 460 8 6 3 0 447 [2750] 190 [00] 205 [3250] 225 [00] 240 [10] 510 318 [4460] 505 344 [44] 505 363 [3260] Torque [lb-in] 3} Nm 0 Speed RPM [57] 6 162 [62] 5 103 [6590] 7 99 [6910] 780 65 [6950] 785 10 [7250] 820 42 7

Performance Data 395 cm 3 /r [24.0 in 3 /r] Motors run with high efficiency in all areas designated with a number for torque and speed. For best motor life select a motor to run with a torque and speed range shown in the light shaded area. Performance data is typical at 120 SUS. Actual data may vary slightly from unit to unit in production. Flow LPM [GPM] Continuous Intermittent [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [26] 98 [28] 106 [] 114 [250] [980] 110 [980] 110 [980] 110 61 490 cm 3 /r [29.8 in 3 /r] [500] [21] 240 29 [2120] 240 44 [2110] 240 60 [2050] 2 75 [750] [1000] [1250] [00] 50 85 105 [6] [1600] 75 180 2 1 [920] [2000] [2990] [3900] [4880] 105 225 340 440 550 7 6 5 4 2 [950] 105 14 [920] 105 76 [860] 95 91 [790] 90 106 [720] 80 122 [6] 137 [550] 60 3 [0] 50 168 [360] 40 184 [2] 199 [2060] 2 13 [1990] 225 90 [19] 220 105 [18] 210 121 [17] 200 136 [16] 190 2 [] 175 168 [1480] 165 184 [1390] 5 195 [1260] 212 [11] 125 2 [3110] 0 12 [32] 365 28 [32] 365 43 [3220] 365 59 [31] 360 74 [3120] 5 90 [55] 3 105 [2990] 340 120 [2890] 325 1 [2800] 3 1 [20] 5 167 [2600] 295 183 [2510] 285 194 [23] 2 211 [2240] 255 229 Peak No Operation [4080] [5110] [6320] 460 575 7 10 9 7 [42] 480 27 [40] 485 42 [43] 490 58 [40] 485 73 [4260] 480 89 [4185] 475 104 [4110] 465 119 [4020] 5 134 [3940] 4 0 [38] 4 165 [37] 420 181 [3640] 410 192 [20] 400 209 [3400] 385 277 [50] 605 26 [53] 605 41 [5400] 610 57 [5390] 610 72 [53] 605 87 [50] 600 102 [52] 590 118 [5] 580 133 [5060] 5 149 [4960] 560 164 [4860] 550 179 [47] 540 190 [46] 525 207 [00] 510 224 [63] 720 24 [6420] 725 39 [64] 7 55 [6460] 7 [6460] 7 85 [6400] 725 100 [6340] 7 116 [6260] 5 131 [6180] 0 146 [60] 685 161 [59] 675 177 [1750] 120 [7380] 8 22 [74] 8 37 [7550] 855 52 [7550] 855 68 [7560] 855 84 [2000] [7980] 900 20 [8225] 9 Flow LPM [GPM] [.5] 1,9 [1] 3,8 [2] 7,5 [4] [6] 23 [8] [10] 38 [12] [14] 53 [16] 61 [18] 68 [20] 76 [22] 83 [24] 91 [26] 98 [28] 106 [] 114 [] 132 [250] [500] [750] 50 [1000] [1250] 85 [00] [1750] [2000][2250] [2500] [2750] 105 120 5 1 190 [560] 65 4 [1310] 0 3 [7] [40] [2290] [80] [3780] [4480] [51] [5880] [6580] [72] 85 175 260 0 4 505 585 665 7 820 9 9 9 8 8 7 7 6 5 4 [790] [80] [2360] [3180] [39] [4680] [54] [6180] [6840] [7500] 90 180 265 360 4 5 6 0 775 8 18 18 18 17 17 16 14 13 11 [810] [1660] [2480] [3320] [41] [4940] [5740] [6550] [72] [7880] 90 37 190 37 280 37 375 36 465 36 560 650 34 740 33 8 31 890 28 [820] [10] [2550] [3420] [4250] [5080] [5920] [6750] [7420] [8000] 90 57 190 56 290 56 385 55 480 54 575 52 6 50 765 49 840 47 905 [820] [10] [2580] [3460] [40] [51] [5960] 90 76 190 75 290 75 390 74 485 73 580 71 675 69 [800] [10] [2590] [3480] [4320] [5160] [6000] 90 95 190 94 295 94 395 93 490 92 585 90 680 88 [7] [1680] [25] [34] [4310] [50] [5990] 85 114 190 113 290 113 390 112 485 111 580 109 675 106 [740] [1640] [25] [34] [4280] [5120] [5960] 85 133 185 132 285 132 390 131 485 129 580 127 675 124 [690] [90] [2480] [33] [4220] [5060] 80 3 180 2 280 2 380 0 475 149 5 146 [640] [] [2420] [3310] [4160] [5010] 1 171 275 171 375 1 4 169 565 167 172 [580] [14] [23] [3260] [4110] [4960] [5820] 65 191 165 190 2 190 3 189 465 188 560 186 660 184 [510] [1390] [2290] [31] [40] [4880] 60 5 260 360 5 550 210 209 209 208 207 206 [440] [13] [2220] [3100] [3950] [4800] 50 2 0 229 250 228 0 227 4 225 540 224 [0] [1240] [21] [20] [3880] 40 249 248 240 247 340 246 440 244 [2] [10] [2050] [29] [3790] 268 1 267 2 265 3 264 4 261 [47] 5 242 [4650] 525 259 [180] [1060] [1960] [2850] [3710] [] 20 287 120 286 220 284 320 283 420 281 5 277 [840] [1760] [2640] [3480] 95 200 0 395 3 334 333 332 [1760] Torque [lb-in] 200} Nm 334 Speed RPM [5910] 6 144 [58] 665 164 [6800] 7 68 [6840] 775 86 [68] 7 103 [7980] 900 3 [81] 925 10 8

Dimensions Standard Mount Ports 7/8-14 UNF-2B SAE O-ring Staggered Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or 1 1/16-12 UN-2B SAE O-ring Ports (Positioned 180 Apart) (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or 7/8-14 UNF-2B SAE O-ring End Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or G 1/2 (BSP) Staggered Ports (2) G 1/4 (BSP) Case Drain Port (1) or Manifold Mount 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) Standard Rotation Viewed from Shaft End Port A Pressurized CW Pressurized CCW Standard Mount YY Max. XX Y Max. X YY Max. 1-1/16-12 UN-2B SAE O-ring Ports (Positioned 180º Apart) 7/8-14 UNF-2B SAE O-ring End Ports STANDARD MOUNT MOTOR DIMENSIONS Displacement X Y XX YY cm 3 /r [in 3 /r] mm [inch] mm [inch] mm [inch] mm [inch] 80 [4.9] 136,9 [5.39] 184,2 [7.25] 139,2 [5.48] 185,4 [7.] 100 [6.2] 141,5 [5.57] 189,0 [7.44] 143,8 [5.66] 190,3 [7.49] 1 [8.0] 147,9 [5.83] 195,4 [7.69] 0,2 [5.92] 196,6 [7.74] 160 [9.6] 147,9 [5.83] 195,4 [7.69] 0,2 [5.92] 196,6 [7.74] 195 [11.9] 4,7 [6.09] 202,2 [7.96] 7,0 [6.18] 203,2 [8.00] 2 [14.9] 163,7 [6.] 211,1 [8.31] 166,0 [6.54] 212,4 [8.36] 5 [18.7] 175,1 [6.90] 222,3 [8.75] 177,4 [6.99] 223,5 [8.80] 395 [24.0] 191,0 [7.52] 238,6 [9.39] 193,3 [7.61] 239,8 [9.44] 490 [29.8] 208,4 [8.21] 255,8 [10.07] 210,7 [8.] 2,1 [10.12] 9

Dimensions Standard Mount with Integral Relief Valve Ports 7/8-14 UNF-2B SAE O-ring Staggered Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or G 1/2 (BSP) Staggered Ports (2) G 1/4 (BSP) Case Drain Port (1) Standard Rotation Viewed from Shaft End Port A Pressurized CW Pressurized CCW Standard Mount with Integral Relief Valve 2X 93.0/92.4 [3.66/3.64] Y Max. X 64.3/63.8 [2.53/2.51] Case Drain 7/16-20 UNF-2B SAE O-ring Port or G 1/4 (BSP) STANDARD MOUNT MOTOR DIMENSIONS Displacement X Y cm 3 /r [in 3 /r] mm [inch] mm [inch] 80 [4.9] 137,0 [5.40] 184,5 [7.26] 100 [6.2] 141,6 [5.58] 189,0 [7.44] 1 [8.0] 147,9 [5.83] 195,4 [7.69] 160 [9.6] 147,9 [5.83] 195,4 [7.69] 195 [11.9] 4,8 [6.10] 202,2 [7.96] 2 [14.9] 163,7 [6.] 211,1 [8.31] 5 [18.7] 175,1 [6.90] 222,6 [8.76] 395 [24.0] 191,1 [7.53] 238,6 [9.39] 490 [29.8] 208,4 [8.21] 255,8 [10.07] 10

Dimensions Wheel Mount Ports 7/8-14 UNF-2B SAE O-ring Staggered Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or 1 1/16-12 UN-2B SAE O-ring Ports (Positioned 180 Apart) (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or 7/8-14 UNF-2B SAE O-ring End Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or G 1/2 (BSP) Staggered Ports (2) G 1/4 (BSP) Case Drain Port (1) or Manifold Mount 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) Standard Rotation Viewed from Shaft End Port A Pressurized CW Pressurized CCW Wheel Mount YY Max. XX Y Max. X YY Max. 1 1/16-12 UN-2B SAE O-ring Ports (Positioned 180 Apart) 7/8-14 UNF-2B SAE O-ring End Ports WHEEL MOUNT MOTOR DIMENSIONS Displacement X Y XX YY cm 3 /r [in 3 /r] mm [inch] mm [inch] mm [inch] mm [inch] 80 [4.9] 96,8 [3.81] 144,0 [5.67] 99,1[3,90] 1,3 [5.72] 100 [6.2] 101,3 [3.99] 148,9 [5.86] 103,6 [4.08] 0,2 [5.91] 1 [8.0] 107,8 [4.25] 5,2 [6.11] 110,1 [4.34] 6,5 [6.16] 160 [9.6] 107,8 [4.25] 5,2 [6.11] 110,1 [4.34] 6,5 [6.16] 195 [11.9] 114.6 [4.51] 161,8 [6.37] 116,8 [4.60] 163,1 [6.42] 2 [14.9] 123,5 [4.87] 171,0 [6.73] 125,8 [4.96] 172,3 [6.78] 5 [18.7] 1,0 [5.32] 182,1 [7.17] 137,4 [5.41] 183,4 [7.22] 395 [24.0] 0,9 [5.94] 198,4 [7.81] 3,2 [6.03] 199,7 [7.86] 490 [29.8] 168,2 [6.63] 2,7 [8.49] 1,7 [6.72] 217,0 [8.54] 11

Dimensions Wheel Mount with Intergal Relief Valve Ports 7/8-14 UNF-2B SAE O-ring Staggered Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) G 1/2 (BSP) Staggered Ports (2) G 1/4 (BSP) Case Drain Port (1) Standard Rotation Viewed from Shaft End Port A Pressurized CW Pressurized CCW Wheel Mount with Integral Relief Valve Y Max. X 2X 93.0/92.4 [3.66/3.64] 64.3/63.8 [2.53/2.51] Case Drain 7/16-20 UNF-2B SAE O-ring Port or G 1/4 (BSP) WHEEL MOUNT MOTOR DIMENSIONS Displacement X Y cm 3 /r [in 3 /r] mm [inch] mm [inch] 80 [4.9] 96,9 [3.82] 144,3 [5.68] 100 [6.2] 101,4 [4.00] 148,9 [5.86] 1 [8.0] 107,8 [4.25] 5,2 [6.11] 160 [9.6] 107,8 [4.25] 5,2 [6.11] 195 [11.9] 114.6 [4.52] 162,1 [6.38] 2 [14.9] 123,5 [4.87] 171,0 [6.73] 5 [18.7] 1,0 [5.32] 182,4 [7.18] 395 [24.0] 1,0 [5.95] 198,4 [7.81] 490 [29.8] 168,2 [6.63] 2,7 [8.49] 12

Dimensions Bearingless Bearingless Ports 7/8-14 UNF-2B SAE O-ring Staggered Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or 1 1/16-12 UN-2B SAE O-ring Ports (Positioned 180 Apart) (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or 7/8-14 UNF-2B SAE O-ring End Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) or G 1/2 (BSP) Staggered Ports (2) G 1/4 (BSP) Case Drain Port (1) or Manifold Mount 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) YY Max. XX 1 1/16-12 UN-2B SAE O-ring Ports (Positioned 180º Apart) Y Max. X 101,60/101,47 [4.000/3.995] Pilot Dia. Standard Rotation Viewed from Shaft End Port A Pressurized CW Pressurized CCW MAT L C,86 [1.412] Dia. D 34,04 [1.340] Dia. E 81,0 [3.19 ] Min. Full Form Dia. F 86,1 [3.39 ] Max. G 62,10 [2.4] Full Form Dia. H 38,40 [1.512] Dia. J 43,7 [1.72 ] Dia. K K 25,91 [1.020] L 8,25 [.325] M 0,89 [.0] L N º M C D N E F G YY Max. 16,8/,2 [.66/.60] 7/8-14 UNF-2B SAE O-ring End Ports 6.7/6,0 [.26/.24] 127,0 [5.00] Dia. O-ring Seal Furnished with Motor 119,2 [4.69] Sq. Max. 24,06/23,54 [.947/.927] 7,5 [6.20] Max. (2) 13,85/13,33 [.5/.525] Dia. Thru (4) 14,22 [.560] Min. (4) Mating Coupling Blank Eaton Part No. 137-003 H J For Bearingless Motor application information contact your Eaton representative (mating coupling blanks available from Eaton Hydraulics). Note: After machining blank, part must be hardened per Eaton specification. BEARINGLESS MOTOR DIMENSIONS Displacement X Y XX YY cm 3 /r [in 3 /r] mm [inch] mm [inch] mm [inch] mm [inch] 80 [4.9] 79,0 [3.11] 126,5 [4.98] 81,3 [3.20] 127,8 [5.03] 100 [6.2] 83,5 [3.29] 131,4 [5.17] 85,8 [3.38] 132,6 [5.22] 1 [8.0] 89,9 [3.54] 137,7 [5.42] 92,2 [3.63] 139,0 [5.47] 160 [9.6] 89,9 [3.54] 137,7 [5.42] 92,2 [3.63] 139,0 [5.47] 195 [11.9] 96,8 [3.81] 144,3 [5.68] 99,0 [3.90] 1,5 [5.73] 2 [14.9] 105,6 [4.16] 3,5 [6.04] 107,9 [4.25] 4,7 [6.09] 5 [18.7] 117,1 [4.61] 164,6 [6.48] 119,4 [4.] 165,9 [6.53] 395 [24.0] 133,1 [5.24] 180,9 [7.12] 1,4 [5.33] 182,1 [7.17] 490 [29.8] 0,3 [5.92] 198,2 [7.80] 2,7 [6.01] 199,3 [7.85] 13

Dimensions Bearingless with Integral Relief Valve Ports 7/8-14 UNF-2B SAE O-ring Staggered Ports (2) 7/16-20 UNF-2B SAE O-ring Case Drain Port (1) G 1/2 (BSP) Staggered Ports (2) G 1/4 (BSP) Case Drain Port (1) Standard Rotation Viewed from Shaft End Port A Pressurized CW Pressurized CCW Bearingless with Integral Relief Valve Y Max. X 2X 93.0/92.4 [3.66/3.64] 64.3/63.8 [2.53/2.51] 101,60/101,47 [4.000/3.995] Pilot Dia. 16,8/,2 [.66/.60] BEARINGLESS MOTORS DIMENSIONS Displacement X Y cm 3 /r [in 3 /r] mm [inch] mm [inch] 80 [4.9] 79,0 [3.11] 126,8 [4.99] 100 [6.2] 83,5 [3.29] 131,4 [5.17] 1 [8.0] 89,9 [3.54] 137,7 [5.42] 160 [9.6] 89,9 [3.54] 137,7 [5.42] 195 [11.9] 96,8 [3.81] 144,6 [5.69] 2 [14.9] 105,6 [4.16] 3,5 [6.04] 5 [18.7] 117,1 [4.61] 164,9 [6.49] 395 [24.0] 133,1 [5.24] 180,9 [7.12] 490 [29.8] 0,3 [5.92] 198,2 [7.80] Case Drain 7/16-20 UNF-2B SAE O-ring Port or G 1/4 (BSP) 6.7/6,0 [.26/.24] 127,0 [5.00] Dia. O-ring Seal Furnished with Motor 119,2 [4.69] Sq. Max. 24,06/23,54 [.947/.927] 7,5 [6.20] Max. (2) 13,85/13,33 [.5/.525] Dia. Thru (4) 14,22 [.560] Min. (4) 14

Installation Information 1 Internal spline in mating part to be per spline data. Specification material to be ASTM A4, 8620H vacuum degassed alloy steel carbonize to a hardness of 59-62 HRc with case depth (to 50HRc) of 0,076-1,02 [.0 -.040]. Dimensions apply after heat treat. 2 Mating part to have critical dimensions as shown. Oil holes must be provided and open for proper oil circulation. 3 Seal to be furnished with motor for proper oil circulation thru splines. 4 Some means of maintaining clearance between shaft and mounting flange must be provided. 5 Counterbore designed to adapt a standard sleeve bearing,010 -,040 [1.3784-1.3795] I.D. by 44,040-44,0 [1.7339-1.] O.D. (Oilite Bronze Sleeve Bearing AAM44-22). Bearingless 34,85/34,82 [1.372/1.371] 0,08 [.003] C -D- Dia. 1,6/0,7 [.06/.03] 59,0/58,4 [2.32/2.] 2,54/2,03 [.100/.080] 4,1/3,5 [.16/.14] 4,9/4,3 [.19/.17] Dia. Thru Oil Hole (2 ) 2 18,6/17,5 [.73/.69] 13,0/11,9 [.51/.47] 43,4/42,4 [1.71/1.67] Coupling Dept h 1,6/0,7 [.06/.03],3/29,7 [1.19/1.17] 16,2 [.60] Min. Dia. Case Flow R 1,8/1,2 [.07/.05] 5 Ø 0,13 [.005] A -A- Major º - º 28,00/27,73 [1.102/1.092] Dia. Circular Tip R. Mino r Finish 34,41 [1.5] Min. Finish Fillet R. Pitch Form 41,1 [1.62] Min. Dia. 4 -B- Case Flow R 0,8 [.03] Max. 3 Spline Pitch... 12/24 Pressure Angle... Number of teeth...12 Class of Fit...Ref. 5 Type of Fit...Side Pitch Diameter...Ref. 25,400000 [1.0000000] Base Diameter...Ref. 21,99 [.8660254] 0,21 [.008] D Major Diameter...(27,74 [1.092] Max. 27,59 [1.086] Min.) Minor Diameter...23,097-23,224 [.9093 -.9143] Form Diameter, Min.... 29,93 [1.060] Fillet Radius...0,64-0,76 [.025 -.0] Tip Radius...0,25-0,38 [.010 -.0] Finish... 1,6 (63) Involute Profile Variation... +0,000-0,025 [+.0000 -.0010] Total Index Variation... 0,038 [.00] Lead Variation... 0,013 [.0005] Circular Space Width: Maximum Actual... 4,318 [.10] Minimum Effective... 4,216 [.1660] Maximum Effective...Ref. 4,2 [.1681] Minimum Actual...Ref. 4,247 [.1672] Dimension Between Two Pins... Ref. 19,020-19,190 [.7488 -.7555] Pin Diameter... 4,496 [.17] Pins to Have 3,38 [.133] Wide Flat for Root Clearance

Four Bolt Dimensions Mounting Options 13,72/13,46 [.540/.5] Dia. Thru (4) 82,55/82,42 [3.250/3.2] Pilot Dia. 18,6/17,0 [.73/.67] 6,4 [.25] SAE A Two Bolt (Standard Motor) 131,1 [5.16] Max. 106,38 [4.188] 18,6/17,0 [.73/.67] 106,38 [4.188] Dia. Bolt Circle 108,8 [4.28] Max. Sq. 20,1 [.79] Max. 22,7/21,8 [.89/.86] Dia. (4) 13,85/13,33 [.5/.525] Dia. Thru (2) 82,55/82,42 [3.250/3.2] Pilot Dia. 6,4 [.25] 22,1 [.87] Max. 22,7/21,8 [.89/.86] Dia. (2) Four Bolt Magneto 13,85/13,33 [.5/.525] Dia. Thru (4) 82,55/82,42 [3.250/3.2] Pilot Dia. 18,6/17,0 [.73/.67] 2,8/2,3 [.11/.09] SAE B Two Bolt 176,8 [6.96] Max. 146,05 [5.750] 101,60/101,47 [4.000/3.995] Pilot Dia. 22,1/17,0 [.87/.67] 9,7/9,1 [.38/.36] 14,53/14,14 [.572/.557] Dia. Thru (2) 57,2/50,8 [2.25/2.00] Dia. 6,7/6,0 [.27/.24] 134,2 [5.28] Max. Sq. 6,7/6,0 [.26/.24] 106,38 [4.188] Dia. 1,7 [5.34] Max. 22,1 [.87] Max. Four Bolt (Wheel Motor) 107,95/107,82 [4.250/4.2] Pilot Dia. 95,2 [3.75] Dia. 127,00/126,87 [5.000/4.995] Dia. 147,638 [5.8125] Dia. Bolt Circle 13,85/13,33 [.5/.525] Dia. Thru 47,3/,7 [1.86/1.80] 22,7/22,0 [.89/.87] 3,8/2,8 [./.11] 22,7/21,8 [.89/.86] Dia. (4) 16

Dimensions Shafts 1 Inch Straight 1 1/4 Inch Tapered 395 [00] Max. Torque Nm [lb-in] 1/4-20 UNC x,5 [.61] Deep 18,5 [.73] 25,40/25,34 [1.000/.998] Dia. 28,28/27,88 [1.113/1.098] 25,40 [1.000] Dia. x 6,38/6, [.251/.250] Woodruff Key 52,1/49,8 [2.05/1.96] End of Shaft to Mounting Surface (Std) 38,4 [1.51] Max. Coupling 768 [6800] Max. Torque Nm [lb-in] 1-20 UNEF 4,1 [.16] Dia. Thru 31,7 [1.250] Dia. 55,1 [2.17] SAE J501 Standard Tapered Shaft 125,00 0,17 Taper per Meter [1.500.002 Taper per Foot] 38,1 [1.50] Hub Recommended Torque: (373 Nm [275 lb-ft] Dry) (5 Nm [225 lb-ft] Lub) Plus Torque required to align the slotted nut with the Shaft Crosshole. 36,6 [1.44] Across Flats 1 1/4 Inch Straight 25 mm Straight 768 [6800] Max. Torque Nm [lb-in] 7,963/7,937 [.31/.3125],34/,05 [1.391/1.380] 3/8-16 UNC x 19,0 [.75] Deep 31,75/31,69 [1.250/1.248] Dia. 56,6/54,4 [2.23/2.14] End of Shaft to Mounting Surface (Std) 32,6/,9 [1.28/1.22] 47,3 [1.86] Max. Coupling 395 [00] Max. Torque Nm [lb-in] 28,00/27,66 [1.102/1.089] M8 x 1.25-6H 21,6 [.85] Min. Deep 105,2/102,9 [4.14/4.05] End of Shaft to Mounting Surface (Whl) 12,7 [.50] 25,9/24,9 [1.02/.98] 7,963/7,937 [.31/.3125] Square Key 3,97/3,63 [.6/.143] at Large End of Taper 52,4/49,7 [2.06/1.96] End of Shaft to Mounting Surface (Std) 8,7/4,5 [.34/18] 7,999/7,965 [.3149/.3136] 32,0/31,7 [1.26/1.24] 25,00/24,97 [.984/.983] Dia. 395 [00] Max. Torque Nm [lb-in] 38,1 [1.50] Max. Coupling 17

Dimensions Shafts 32 mm Straight SAE 6B Splined 768 [6800] Max. Torque Nm [lb-in] 65,8/63,5 [2.59/2.50] End of Shaft to Mounting Surface (Std) 395 [00] Max. Torque Nm [lb-in] 52,1/49,8 [2.05/1.96] End of Shaft to Mounting Surface (Std) 10,00/9,96 [.394/.392],0/34,7 [1.38/1.37] 9,2/4,5 [.36/.18],7/,3 [1.80/1.74] Spline Per SAE J499 25,/25,29 [.998/.996] Dia. 21,16/20,90 [.833/.823] M8 x 1.25-6H 21,6 [.85] Min Depth 32,017/31,991 [1.2605/1.2595] 56,4 [2.22] Max. Coupling 1/4-20 UNC x,2 [.60] Deep 1 1/4-14 Tooth Splined 13 Tooth Splined 768 [6800] Max. Torque Nm [lb-in] Flat Root Side Fit, 14 Tooth 12/24 Spline to Fit ANSI B92.1 1976 3/8-16 UNC 19,0 [.75] Min. Depth 31,75 [1.250] Dia. 56,4/54,4 [2.22/2.14] End of Shaft to Mounting Surface (Std) 26,36/26,11 [1.038/1.028],5 [1.79] Max. Coupling 33,0 [1.] Min. Full Spline Depth 141 [1250] Max. Torque Nm [lb-in] 22,75 [.896] Min. Full Depth Spline Spline to Fit SAE J498b Flat Root Side Fit 13 Tooth 16/32 Spline 21,806/21,678 [.8585/.85] Dia.,2 [.60] Min. Full Spline 28,8 [1.13] Max. Coupling Length 42,2/40,1 [1.66/1.58] End of Shaft to Mounting Surface (Std) 18,60/18,36 [.732/.723] Dia.,8 [1.21] Max. Coupling Length 18

Shaft Side Load Capacity These curves indicate the radial load capacity on the motor shaft at various locations with an allowable external thrust load of 4 kg [1000 lb]. Note: Case pressure will increase the allowable inward thrust load and decrease the allowable outward thrust load. Case pressure will push outward on the shaft at 61 kg/7 Bar [1 lb/100 PSI]. Each curve is based on Thrust Load Max. Axial Loads 4 kg [1000 lb] B 10 bearing life (2000 hours of 12,000,000 shaft revolutions at 100 RPM) at rated output torque. To determine radial load at speeds other than 100 RPM, multiply the load values given on the bearing curve by the factors in the chart below. RPM Multiplication Factor 50 1.23 100 1.00 200 0.81 0 0.72 400 0.66 500 0.62 600 0.58 0 0.56 800 0.54 For 3,000,000 shaft revolutions or 500 hours Increase these shaft loads 52%. Standard Motor Straight and Splined Shafts [lb] [9000] [8000] [00] [6000] [5000] [4000] [00] [2000] [1000] [lb] 0 [9000] [8000] [00] [6000] [5000] [4000] [00] [2000] [1000] 0 kg 4000 00 00 2500 2000 00 1000 500 Wheel Motor Tapered Shaft 0 mm -80-60 -40-20 0 20 40 60 80 100 120 [inch] [-3] [-2] [-1] 0 [1] [2] [3] [4] [5] kg 4000 00 00 2500 2000 00 1000 500 Mounting Surface 0 mm -80-60 -40-20 0 20 40 60 80 100 120 [inch] [-3] [-2] [-1] 0 [1] [2] [3] [4] [5] Mounting Surface 19

Case Pressure and Case Porting Char-Lynn motors are durable and have long life as long as the recommended case pressure is not exceeded. Allowable case pressure is highest at low shaft speeds. Consequently, motor life will be shortened if case pressure exceeds these ratings (acceptability may vary with application). Determine if an external case drain is required from the case pressure seal limitation chart. Case Porting Advantage Contamination Control flushing the motor case. Cooler Motor exiting oil draws motor heat away. Extend Motor Seal Life maintain low case pressure with a preset restriction in the case drain line. 0 100 Case Pressure Bar 50 [PSI] 0 [2000] [00] [1000] [ 500] 0 0 Case Pressure Seal Limitation Intermittent -- Case Drain Optional Continuous -- Case Drain Optional 0 100 200 0 400 500 600 0 800 900 Speed RPM Case Drain Required 20

Dimensions Ports 7/8-14 UNF-2B SAE O-ring Ports (2) or G 1/2 (BSP) Ports (2) 48,6 [1.91] Max. 17º 11,9 [.47] 27,2/25,9 [1.07/1.02] 6,9/3,8 [.27/.] 7/16-20 UNF-2B SAE O-ring or G 1/4 (BSP) Case Drain Port Manifold Mount 38,10 [1.500] Port A 13,3/12,1 [.52/.48] Dia. 25,4 [1.00] Port A 65,02 [2.560],56 [1.400] 16,3/,4 [.64/.61] Dia. 3/8-16 UNC,7 [.62] Deep (3) or M10 x 1.5-6H (3) 22,1 [.8] 47,50 [1.8] 11,58 [.6] 57,7 [2.27] Max. 56,9 [2.24] Max. 56,6 [2.23] Max. 18,1/16,5 [.71/.65] 56,9 [2.24] Max. 18,1/16,5 [.71/.65] 7/16-20 UNF-2B SAE O-ring or G 1/4 (BSP) Case Drain Port 21

Dimensions Ports 1-1/16-12 UN-2B SAE O-ring Ports (2) Positioned 180º Apart 7/8-14 UNF-2B SAE O-ring End Ports (2) 23,9 [.94] B Port A Port,8/14,2 [.62/.56] 47,8 [1.88] Max. 7/16-20 UNF-2B SAE O-ring Case Drain Port 56,9 [2.24] Max. 7/16-20 UNF-2B SAE O-ring Case Drain Port 47,8 [1.88] Max. 56,9 [2.24] Max. Port A 57,2 [2.25] Max. 6,9/3,8 [.27/.] 17º 60,0 [2.] Max. 21,59 [.850] Port A 57,2 [2.25] Max. 59,0 [2.32] Max. 22,05 [.868] 13,34 [.525] 50,80 [2.000] 22

Dimensions Ports with Shuttle 7/8-14 UNF-2B SAE O-ring Ports (2) or G 1/2 (BSP) Ports (2) 11,9 [.47] Back-Pressure Relief Valve This port option is available with shuttle and back pressure relief valve for closed loop applications. 25,4 [1.00] Port A 27,2/25,9 [1.07/1.02] 57,7 [2.27] Max. 62,5 [2.46] Max. 17,5 [.689] Shuttle Location Case Drain 7/16-20 UNF-2B SAE O-ring Port or G 1/4 (BSP) 7/8-14 UNF-2B SAE O-ring End Ports (2) This port option is available with shuttle and back pressure relief valve for closed loop applications. 7/16-20 UNF-2B SAE O-ring Case Drain Port 53,1/47,8 [2.09/1.88] 59,0 [2.32] Max. 22,05 [.868] 50,80 [2.000] Min. 47,8 [1.88] Max. 62,5 [2.46] Max. 48,6 [1.91] Max. 50º Back-Pressure Relief Valve,9 [.625] Port A Shuttle Location 21,59 [.850] 13,34 [.525] 50,80 [2.000] Case Drain 7/16-20 UNF-2B SAE O-ring Port or G 1/4 (BSP) 23

Product Numbers Note: For Motors with a configuration Not Shown in the charts below: Use model code number system on the next page to specify product in detail. Use digit prefix 104-, 105-, or 106- plus four digit number from charts for complete product number Example 106-1043. Orders will not be accepted without three digit prefix. MOUNTING SHAFT PORT SIZE DISPL. cm 3 / r [in 3 / r] / PRODUCT NUMBER 80 90* 100 1 160 195 2 5 395 490 [4.9] [5.5] [6.2] [8.0] [9.6] [11.9] [14.9] [18.7] [24.0] [29.8] 1 Inch Straight 7/8-14 O-ring Staggered 104-1001 -1002-1003 -1004-1005 -1006-1007 -1143 1 1/16-12 O-ring 180 Apart 104-1037 -1038-1039 -1040-1041 -1042-1043 -1044 7/8-14 O-ring 2 Bolt Staggered 104-1022 -1023-1024 -1025-1026 -1027-1028 -1228-1420 SAE A 1 1/4 Inch Straight Flange 1 1/16-12 O-ring 180 Apart 104-1061 -1062-1063 -1064-1065 -1066-1067 -1068-1421 1 1/4 Inch 7/8-14 O-ring Staggered 104-1029 -10-1031 -1032-1033 -1034-10 -1229-1422 14 T Splined 1 1/16-12 O-ring 180 Apart 104-1087 -1088-1089 -1090-1091 -1092-1093 -1094-1423 1 1/4 Inch Straight 7/8-14 O-ring Staggered 104-1200 -1201-1202 -1203-1204 -1205-1206 -1207 1 1/4 Inch Involute 7/8-14 O-ring 2 Bolt SAE C Splined Staggered 104-1208 -1209-1210 -1211-1212 -1213-1214 -12 SAE B Flange 1 Inch 7/8-14 O-ring SAE 6B Splined Staggered 104-1193 -1194-1195 -1196-1197 -1198-1199 7/8 Inch SAE B Splined 7/8-14 O-ring Staggered 104-1216 -1217-1218 -1219-1220 Standard with 32 mm Straight G 1/2 (BSP)) 104-1384 -1385-1386 -1387-1388 -1389-1390 -1391 4 Bolt 1 1/4 Inch Flange 14 T Splined G 1/2 (BSP) 104-1376 -1377-1378 -1379-1380 -1381-1382 -1383 1 1/4 Inch Straight 7/8-14 O-ring Staggered 105- -1148 1 1/16-12 O-ring 180 Apart 105- -1149 32 mm Straight G 1/2 (BSP) 105-1134 -11-1136 -1137-1138 -1139-1 -1141 Wheel 7/8-14 O-ring Motor 1 1/4 Inch Staggered 105-1001 -1002-1003 -1004-1005 -1006-1007 -1060-12 Tapered 1 1/16-12 O-ring 180 Apart 105-1071 -1072-1073 -1074-1075 -1076-1077 -1078 7/8-14 O-ring 1 1/4 Inch Staggered 105-1029 -10-1031 -1032-1033 -1034-10 -1096 14 T Splined 1 1/16-12 O-ring 180 Apart 105-1079 -1080-1081 -1082-1083 -1084-1085 -1086 7/8-14 O-ring Staggered Bearingless 106-1008 -1009-1010 -1011-1012 -1013-1014 -10-1047 G 1/2 (BSP) 106-1038 -1039-1040 -1041-1042 -1043-1044 -10 *New Release 106-1044 Motors with Corrosion Protection MOUNTING SHAFT PORT SIZE DISPL. cm 3 / r [in 3 / r] / PRODUCT NUMBER 80 90* 100 1 160 195 2 5 395 490 [4.9] [5.5] [6.2] [8.0] [9.6] [11.9] [14.9] [18.7] [24.0] [29.8] 2 Bolt 1 inch Straight 7/8-14 O-ring Staggered 104-28 -29 - -31-32 -33-34 -19 - Staggered Flange *New Release SAE A 1 1/4 Inch Straight 7/8-14 O-ring 104-16 -36-37 -38-39 -12-1479 -09-1489 24

The following -digit coding system has been developed to identify all of the configuration options for the motor. Use this model code to specify a motor with the desired features. All digits of the code must be present when ordering. You may want to Model Code photocopy the matrix below to ensure that each number is entered in the correct box. M 0 2 * * * * * * * * * * * * * 1 * * * 0 0 * * * * A A F 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1 Product M Motor 2, 3 Product Series 02 Motor 4, 5, 6 Displacement cm 3 /r [in 3 /r] 049 80.6 cm 3 /r [4.92] 055 90.6 cm 3 /r [5.53 in 3 /r] 062 101.6 cm 3 /r [6.20 in 3 /r] 080 1.6 cm 3 /r [7.97 in 3 /r] 096 8.1 cm 3 /r [9.65 in 3 /r] 119 194.8 cm 3 /r [11.89 in 3 /r] 149 244.3 cm 3 /r [14.91 in 3 /r] 187 6.6 cm 3 /r [18.71 in 3 /r] 240 393.8 cm 3 /r [24.03 in 3 /r 298 489.0 cm 3 /r [29.84 in 3 /r] 7, 8 Mounting Type AB Wheel, 4 Bolt: 108.0 [4.25] Pilot Dia. 13.59 [.5] Dia. Holes on 147.6 [5.81] Dia. Bolt Circle. 127.0 [5.00] Dia. Rear Mount Pilot AC Standard, 2 Bolt: 82.6 [3.25] Pilot Dia. 13.59 [.5] Dia. Holes on 106.4 [4.19] Dia. Bolt Circle. SAE A AD Bearingless (w/ Leakage Slots), 4 Bolt: 101.6 [4.00] Pilot Dia. 13.59 [.5] Dia. Holes on 127.0 [5.00] Dia. Bolt Circle AF Standard, 2 Bolt: 101.6 [4.00] Pilot Dia. 14. [.565] Dia. Holes on 146.0 [5.75] Dia. Bolt Circle. SAE B AH Standard, 4 Bolt: 82.6 [3.25] Pilot Dia. 13.59 [.5] Dia. Holes on 106.4 [4.19] Dia. Bolt Circle AJ Standard (Magneto), 4 Bolt: 82.6 [3.25] Pilot Dia. 13.59 [.5] Dia. Holes on 106.4 [4.19] Dia. Bolt Circle. 2.79 [.110] Pilot Length AP Wheel, 4 Bolt: 108.0 [4.25] Pilot Dia. 13.59 [.5] Dia. Holes on 147.6 [5.81] Dia. Bolt Circle. 127.0 [5.00] Dia. Rear Mount Pilot. Spigot Reduced to 88.9 [3.50] Dia. by 25.4 [1.00] Depth. AZ Bearingless (w/ Leakage Slots), 4 Bolt: 100.0 [3.94] Pilot Dia. 11.0 [.43] Dia. Holes on 125.0 [4.92] Dia Bolt Circle (European) 9, 10 Output Shaft 00 None (Bearingless) 01 25.40 [1.000] Dia. Straight Shaft with 1/4-20UNC-2B Thread in End, 6. [.250] Wide x 25.40 [1.000] Dia. Woodruff Key 02 31.75 [1.250] Dia. Straight Shaft with.375-16unc-2b Thread in End, 7.938 [.3125] Sq x 31.75 [1.250] Straight Key 03 31.75 [1.250] Dia..125:1 Tapered Shaft per SAE J501 with/1.000-20 UNEF-2A Threaded Shaft End and Slotted Hex Nut, 7.938 [.3125] Sq x 25.40 [1.0] Straight Key 04 31.75 [1.250] Dia. Flat Root Side Fit, 14 Tooth, 12/24 DP Involute Spline w/.375-16unc-2b Thread in End, 33.0 [1.] Min. Full Spline Length 05 25.40 [1.000] Dia. 6B Spline per SAE J499 with.250-20unc-2b Thread in End, 22.76 [.896] Min. Full Spline Length 07 22.22 [.875] Dia. Flat Root Side Fit, 13 Tooth, 16/32 DP SAE B Involute Spline,.2 [.60] Min. Full Spline Length 16 32.00 [1.260] Dia. Straight Shaft with M8 x 1.25-6H Thread in End, 9.982 [.39] W x 7.995 [.3132] H x.00 [1.772] L Key 17 31.75 [1.250] Dia. Straight Shaft With 3/8-16 UNC-2B Thread in End, 7.938 [.3125] Sq x 31.75 [1.250] Straight Key, Corrosion Resistant (Seal area to shaft end) 18 31.75 [1.250] Dia..125:1 Tapered Shaft per SAE J501 with 1.000-20UNEF- 2A Threaded Shaft End and Slotted Hex Nut, 7.938 [.3125] Sq x 25.40 [1.000] Straight Key, Corrosion Resistant (Under seal area only) 19 25.00 [.984] Dia. Straight Shaft with M8 x 1.25-6h Thread in End, 7.982 [.3142]W x 6.954 [.2738]H x 31.82 [1.254]L Key 28 32.00 [1.260] Dia. 10:1 Tapered Shaft Per ISO R775 with M10 X 1.50-6H Thread in End, 6.00 [.236] Sq. x 50.00 [1.968] Key 39 None (Bearingless) European Spline 41.00 [1.378] Dia. 10:1 Tapered Shaft Per ISO R775 with M20 x 1.5-6g Threaded Shaft End and Slotted Hex Nut, 6.00 [.236] Sq. X 20.00 [.787] Key 42.00 [1.378] Dia. Straight Shaft with M8 x 1.25-6h Thread in End, 9.982 [.39]W x 7.995 [.3132]H x.00 [1.772]L Key 11, 12 Ports AA.875-14 UNF-2B SAE O-ring Ports - Staggered Ports AB 12. [.500] and.88 [.625] Dia. Manifold Ports with 3 x.375-16 UNC-2B Port Block Mounting Holes AC.875-14 UNF-2B SAE O-ring Ports - Ports Oriented 180 to each other AE 12. [.500] And.88 [.625] Dia. Manifold Ports with 3 x M10 x 1.5-6H Port Block Mounting Holes AF 1.0625-12 UN-2B SAE O-ring Ports - Ports Oriented 180 to each other AG G-1/2 BSP Straight THD Ports - Staggered Ports AN G-1/2 BSP Straight THD Ports - End Ported AR.875-14 UNF-2B SAE O- ring Ports - End Ported, Cast Boss Removed AS G-1/2 Bsp Straight THD Ports - Staggered Port with 2 x M10 x 1.5-6H lock Mounting Holes - European 13, 14 Case Flow Options Shuttles available with port code AA only) 00 None 01.4375-20 UNF-2B SAE O-Ring Port 02 G 1/4 BSP Straight THD Port 09 Reverse Flow Shuttle Valve w/ G-1/4 BSP Straight THD Port,.062 Dia. Shuttle Flow Orifice 13 Reverse Flow Shuttle Valve w/.4375-20 UNF-2B SAE O-Ring Port,.062 Dia. Shuttle Flow Orifice Low Pressure Relief 0 None A Set at 4.5 bar [65 lbf/in 2 ] B Set at.2 bar [220 lbf/in 2 ] C Set at 20.7 bar [0 lbf/in 2 ] E Set at 11.03 bar [160 lbf/in 2 ] 16, 17 Pressure/Flow Option Integral Cross-Over Relief Valve: 00 None Set at 103.4 bar [00 lbf/in 2 ] 31 Set at 120.6 bar [1750 lbf/in 2 ] 32 Set at 137.9 bar [2000 lbf/in 2 ] 33 Set at 5.1 bar [2250 lbf/in 2 ] 34 Set at 172.4 bar [2500 lbf/in 2 ] Set at 189.6 bar [2750 lbf/in 2 ] 36 Set at 206.8 bar [00 lbf/in 2 ] 18 Geroler Option 1 Standard 19 Seal Options 0 Standard 1 Viton 2 Viton Shaft Seal 4 Seal Guard 20, 21 Accessories 00 None AD M 12 Threaded Connector, Digital Speed Pickup ( Pulse) AE M 12 Threaded Connector, Long Body Digital Speed and Direction Pickup (1 = Power Supply, Pin 2 = Output Signal 1, Pin 3 = Common, Pin 4 = Output Signal 2) 22, 23 Special Features (Hardware) 00 None 24, 25 Special Features (Assembly) 00 None AB Reverse Rotation 26, 27 Paint/Packaging AA No Paint, Indiv. Box AB Painted, Low Gloss Black, Indiv. Box AC Epoxy Coated (Frost Gray) Indiv. Box 28, 29 Customer ID AA None Design Code F Sixth 25