Introduction Hyva tipping valves Hyva offers a complete range of tipping valves to be used for different cylinder volumes. The T 0 & 00 valve can be used for flows up to 0 litre per minute. The pressure settings are from 50 to 50 bar. The T-valve has fully interchangeable pressure cartridges, so you can adjust the pressure settings yourself. Dual pressure valves are available as well. For smaller flows you can use the T40 or the DHM range. The Hyva T 0 & 0 tipping valves are constructed with a pilot operated pressure relief valve with fixed pressure setting (by means of cartridges), which protects both the cylinder and the pump for overpressure. This tipping valve is also designed to allow proportional lowering, which is of main importance when lowering (half) loaded bodies. This tipping valve can be directly fitted to the Hyva oil tank, which reduces the number of hoses and fittings and consequently the possibility of leakages. The Hyva T-valves & DHM valves can be mounted in line or directly on the oil tank. The T-valve and the DHM-valve can be mounted on the same block. The T-valves are operated by Hyva air control. The DHMvalves are operated by cable control or by Hyva air control. Tipping valve kits To simplify the process of choosing the right adaptors and mounting equipment Hyva has prepared tipping valve kits for tank mounted and chassis mounted valves. We have options with straight or 90 connections for ¾ & high pressure hoses. Code system tipping valve kits E D 0 B C adapter kit mounting position working pressure valve types always E for valve kits C = adapter kit straight D = adapter kit 90 = tank block mounted B = chassis mounted C = T 0 valve kit for ¾ hoses D = T 0 valve kit for hoses H = T 0 valve kit for ¾ hoses L = T 0 valve kit for hoses V = DHM valve kit for ¾ hoses W = DHMC valve kit for ¾ hoses S = DME 6 V valve kit for ½ hoses T = DME 6 V valve kit for ½ hoses Other valves part from special tipping valves, Hyva also supplies a variety of flow-, pressure and motion control valves such as knock-off valves, sequence valves, series and parallel flow control valves, pressure relief valves, hose failure valves, non return valves, overcentre valves etc. Hyva also supplies a full range of monoblock and bankable spool valves up to sections with flows from 45 to 60 lm, various controls and options such as port relief valves and flow control sections.
6 Hyva Valves T 0 valve T 0 valve single pressure art no. Description Max. press. Kit no. Kit no. (bar) ¾ connect. connect. 4 6 5 Tipping valve - T0-50 50 EC50 ED50 4 6 Tipping valve - T0-0 0 EC0 ED0 4 6 9 Tipping valve - T0-90 90 EC90 ED90 4 6 Tipping valve - T0-0 0 EC0 ED0 4 6 5 Tipping valve - T0-50 50 EC50 ED50 4 6 8 Tipping valve - T0-80 80 EC80 ED80 4 6 5 Tipping valve - T0-50 50 EC50 ED50 Flow 0 Lmin. orts G Weight 6.4 kg 8 8 4 5 B 9 6 : pump connection ( ) : return tank connection (T) B : alternative return tank connection (T) : cylinder connection (C) 4 : pneumatic connection of air control - tip 5 : pneumatic connection of air control - lower 6 : regulator for adjustment of lowering speed : pressure gauge point 8 : cartridge ressure cartridge for T 00-valve art no. Description 4 5 ressure cartridge T 00-5 bar 4 50 ressure cartridge T 00-50 bar 4 0 ressure cartridge T 00-0 bar 4 90 ressure cartridge T 00-90 bar 4 0 ressure cartridge T 00-0 bar 4 50 ressure cartridge T 00-50 bar 4 80 ressure cartridge T 00-80 bar 4 00 ressure cartridge T 00-00 bar 4 0 ressure cartridge T 00-0 bar 4 50 ressure cartridge T 00-50 bar ll cartridges need a bonded seal art no. Description 48 4 09 Bonded seal TKL pressure cartridge
45 Hyva Valves T 0 & T 40 valve Tipping valve T 0 double pressure art no. Description Max. press. Kit no. Kit no. (bar) ¾ H hose H hose 4 6 5 Tipping valve - T0-50-0 50 EH0 EL0 4 6 55 Tipping valve - T0-50-50 0 EH50 EL50 4 6 58 Tipping valve - T0-50-80 90 EH80 EL80 4 6 65 Tipping valve - T0-50-50 0 EH50 EL50 4 6 Tipping valve - T0-0-0 50 EH EL 4 6 Tipping valve - T0-0-50 80 EH5 EL5 Flow 0 Lmin. orts G Weight 6.4 kg 8 8B 4 5 8 B 9 9 6 : pump connection ( ) : return tank connection (T) B : alternative return tank connection (T) : cylinder connection (C) 4 : pneumatic connection of air control - tip 5 : pneumatic connection of air control - lower 6 : regulator for adjustment of lowering speed : pressure gauge point 8 : cartridge 9 : handle Tipping valve T 40 art no. Description Max. press. Kit no. (bar) ¾ H hose 4 08 55 H Tipping valve - T40-0 0 E 0 4 08 56 H Tipping valve - T40-90 90 E 90 4 08 60 H Tipping valve - T40-50 50 E 50 Flow 40 Lmin. orts G¾ orts G 8 Weight 4.8 kg hydraulic pneum. 45 0 4 5 X Y 84 8 09 9 6 : pump connection () : return tank connection (T) : cylinder connection () 4 : pneumatic connection of air control-lower (X) 5 : pneumatic connection of air control-tipping (Y) 6 : pressure relief valve (C) : eye for cable knock-off 8 : non-return valve 9 : pressure relief valve ()
Mounting parts Chassis mounting kit T-valve os. art no. Description Qty. 4 5 08 chassis mounting kit T-valve consisting of: 4 5 0 mounting plate 0 06 8 bonded seal 4 99 5 allen plug ½ 0 Nm delivered with valve delivered with valve Tank mounting kit T-valve * os. art no. Description Qty. 4 5 68 Tank mounting kit T-valve consisting of: 50 645 Bolt 50 4 080 Locking ring 0 5 60 O-ring 4 VC plug * This mounting kit is standard in the supply of the Tvalve 4 0 Nm ressure test equipment art no. Description Qty. 4 45 008 ressure gauge complete consisting of: ressure gauge 400 bar dapter 8 BSOT - 8 BSOT dapter 8 BSOT - 4 BSOT Test equipment for pneumatic parts (48 80 90) can be found in the air control part of this catalogue.
DHM & DHMC valve Tipping valve DHM- pneumatic operated art no. Description Max. press. Kit no. (bar) ¾ H hose 4 08 H Tipping valve DHM 0-0 0 EV0 4 08 6 H Tipping valve DHM 0-60 60 EV60 4 08 H Tipping valve DHM 0-0 0 EV0 4 08 9 H Tipping valve DHM 0-90 90 EV90 4 08 H Tipping valve DHM 0-0 0 EV0 4 08 8 H Tipping valve DHM 0-80 80 EV80 Flow 0Lmin. orts G¾ orts G 8 Weight.5 kg hydraulic pneum. 46 8 5 4 5 6 : pump connection () : return tank connection (T) : cylinder connection () 4 : pneumatic connection of air control-lower (X) 5 : pneumatic connection of air control-tipping (Y) 6 : pressure relief valve cap : knock-off connection (cable) 8 : non-return valve 68 Tipping valve DHMC - cable operated art no. Description Max. press. Kit no. (bar) ¾ H hose 4 08 5 H Tipping valve DHMC 0-0 0 EW0 4 08 55 H Tipping valve DHMC 0-60 60 EW60 4 08 5 H Tipping valve DHMC 0-0 0 EW0 Flow 0Lmin. orts G¾ Weight.5 kg 6 5 4 46 68 : pump connection () : return tank connection (T) : cylinder connection () 4 : cable control connection 5: 6 : pressure relief valve cap knock-off connection (cable) : non-return valve
Mounting kit DHM valve Mounting kit DHMC0 - valve on tank os. art no. Description Qty. 4 5 95 Mounting kit DHMC - on tank consisting of: 50 650 Bolt 50 00 Washer 48 0 5 ir coupling 4 0 5 60 O-ring 5 Nm 4 Mounting kit DHMC0 - valve on chassis os. art no. Description Qty. 4 5 98 Mounting kit DHMC - on chassis consisting of: 50 650 Bolt 50 00 Washer 48 0 5 ir coupling 4 4 5 0 Chassis mounting plate 5 Nm 4
DME Valve + DMC valve Electrical tipping Valve DME 6 art no. Description Relief Volt Kit no. valve sett. (V) ¾ H hose 4 00 090 H Tipping valve DME 6 V-5 5 bar ES 5 4 00 09 H Tipping valve DME 6 V-80 80 bar ES 80 4 00 095 H Tipping valve DME 6 4V-5 5 bar 4 ET 5 4 00 05 H Tipping valve DME 6 4V-80 80 bar 4 ET 80 Flow 5 Lmin. orts G 8 Weight.4 kg The hole pattern of this valve is not suitable for the standard Hyva tank or chassis mounting plate. This valve can be mounted directly on oil tank SM-05L0L-M (art no.40 005) Use mounting kit 4 08 069H. 40 8 5 4 6 9 50 56 40 00 : pump connection ( ) : return tank connection (T) : cylinder connection () 4 : electric solenoid tip 5 : electric solenoid lower 6 : pressure relief valve cap : non-return valve 8 : emergency push button 9 : pressure test port 8"G Cable operated tipping Valve DMM art no. Description Relief valve sett. 4 08 0 H Tipping valve DMM 40 C - 0 0 bar 4 08 5 H Tipping valve DMM 40 C - 60 60 bar Flow 40 Lmin. orts G½ Weight.8 kg The hole pattern of this valve is not suitable for the standard Hyva tank or chassis mounting plate. This valve can be mounted directly on oil tank SM-05L0L-M (art no.40 005) Use mounting kit 09 5 0H. 4 6 5 8 56 50 65 95 : pump connection : return tank connection : cylinder connection 4: 5: knock-off connection (cable) cable connection 6 : pressure relief valve : non-return valve 8 : pressure test port 8"G 5
Cable and electric parts Cable Control for tipping valves art no. Description Weight (kg) 00 0 H Cable control tipping valve.5 m-positions. 00 0 48 H Cable control tipping valve.0 m-positions. 00 0 H Cable control tipping valve.5 m-positions. 00 0 4 H Cable control tipping valve.0 m-positions.4 00 0 5 H Cable control tipping valve.5 m-positions.5 00 06 H Cable control tipping valve 4.0 m-positions.6 00 0 H Cable control tipping valve 4.5 m-positions. 5 M M6 Switch panel electric TILOWER art no. Description 00 0 0 switch panel electric This panel can be used in combination with our electric tipping valves Hydraulic pressure indicator art no. Description 48 80 90 DS ressure switch for control light 00bar-¼ BSOT 48 80 9 rotective cap with dual cable entries To fit this pressure switch on the T-tipping valve use adapter 8 BSOT - ¼ BSIT (48 80 90 VL)
ressure relief valve ressure relief valve - adjustable art no. Description ress. orts Flow Weight B C D E F G H (Bar) T (Lmin) (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 0 9 85 Valve pres. relief 00L-0 bar KNOB (alu) 50-0 ¾ ¾ 00. 0 00 50 50 54 5 95 H F G B T D Ø8.5 E C ressure relief valve art no. Description ress. orts Flow Weight B C D E F G H (bar) T (Lmin) (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 0 9 880 Valve pres. relief 00L-0 bar BOLT (alu) 50-0 ¾ ¾ 00. 0 00 50 50 54 5 6.5 0 9 885 Valve pres. relief 00L-50 bar BOLT (steel) 80-50 ¾ ¾ 00.4 0 00 50 50 54 5 6.5 0 9 890 Valve pres. relief 00L-50 bar BOLT (steel) 80-50 00.4 85 0 60 6 0 65 65 6.5 H F G B T D Ø8.5 E C
Hydraulic knock-off s Knock-off hydraulic UCB 4565 cylinders art no. Description Max. orts Flow Weight press. (bar) (Lmin) (kg) 4 5 800 Hydraulic knockoff UCB 4565*) 00 bar ½ 60??? 4 5 805 Hydraulic knockoff UCB 6* 00 bar ½ 60??? *) This -line hydraulic knock-off can only be used in combination with UCB cylinders with cradle brackets (part no. 04 4 665 (4565) and 04 4 66 (6) neumatic knock-off s are listed in the air control section of the catalogue. 0 40 0 front of vehicle 0 C : C-port; connect to cylinder : -port; connect to hose 8.5 9.5 C 58 ½ BS Knock-off hydraulic art no. Description Type ress orts Flow Weight (bar) (Lmin) (kg) 4 0 0 Knock-off hydraulic 8 - way - line in-line 50 8 50.4 4 0 0 Knock-off hydraulic ¾ - way - line in-line 50 ¾ 00.4 4 0 80 Knock-off hydraulic - way - line in-line 50 00. 4 00 505 Knock-off hydraulic 8 - way - line by-pass 50 8 50.4 4 00 50 Knock-off hydraulic ¾ - way - line by-pass 50 ¾ 00.4 4 00 595 Knock-off hydraulic - way - line by-pass 50 00. The pneumatic knock-off s can be found in the air control part of the catalogue IN OUT OUT 0 50 IN OUT way - line way - line IN
Diverter valves Diverter valve pneumatic VDMR art no. Description Max. orts Flow Weight press B (Lmin) (kg) 4 08 60 H Diverter valve VDMR - 50 50 bar G G G 60.6 4 08 6 H Diverter valve VDMR - 50 50 bar G G¾ G¾ 00.6 4 08 60 H Diverter valve VDMR-D - 50 50 bar G G¾ G¾ 00.6 Use air connector Mx.5 with part no. 09 5 90H Note: 4 08 60 H has negative overlap B Mx.5 66 40 Y X 5 80 0 Ø Y B : inlet : tipper connection B : trailer connection X : air connection Mx.5 Y : air connection = 8 X diverter valves have an open middle position and therefore need to be connected by two air lines. Diverter valve pneumatic - art no. Description Max. orts Flow Weight Kit no. *) press. (bar) (Lmin) (kg) 4 000 Diverter valve - 50 bar 50 4.5 L00-4 00 50 Diverter valve - 50 bar 50 4.5 Use air connector 8 BS with part no. 48 0 5 B 49 X 55 50 : inlet = : tipper connection = B : trailer connection = X : air connection = 8 98 If this diverter valve is mounted directly on our T 0 or T 0 valve a special coupling with O-ring (part no. 4 00 5) can be provided. This adapter provides a leak free adjustable connection. Ø8.5 *) Kit L00- consisting of all adapters to connect the selector valve to ¾ hoses. Mounting bolts are also included. diverter valves have an open middle position and therefore need to be connected by two air lines.
6, Hyva Valves Diverter & hose burst valves Manual operated diverter valve art no. Description Max. orts Flow L L W H ØD press B (Lmin) (mm) (mm) (mm) (mm) (mm) 4 0 0 Valve diverter -50-05L- 8 50 bar G 8 G 8 G 8 5 0 5 64 8.5 4 0 40 Valve diverter -50-050L-½ 50 bar G½ G½ G½ 50 85 9 68 8.5 4 40 05 Valve diverter -50-085L-¾ 50 bar G¾ G¾ G¾ 85 9 0 80 0.5 4 0 50 Valve diverter -50-00L-¾ 50 bar G¾ G¾ G¾ 00 90 00 80 0.5 4 40 040 Valve diverter -50-40L-¾ 50 bar G¾ G¾ G¾ 40 50-86 5 0.5 4 40 0 Valve diverter -50-80L- 50 bar G G G 80 98 6 5 89 0.5 These diverter valves have an open middle position 4 40 040 is delivered without a lever. Order a separate lever M (40055) to complete this valve L H ØD L B W Bewerken : inlet : working port B : working port 440040 Hose burst valve with relief art no. Description Max. orts Flow Weight press. (bar) (Lmin) (kg) 4 4 0 Hose burst valve SE 90 bar 5 4.0 90 0 90 C 5,4 : valve housing : pressure cartridge (490) C : C-port; connect direct to cylinder : -port; connect to hose
Flow restrict. & Multi-section Flow restrictor valve art no. Description Max.press orts Dimensions Flow Weight (bar) L H KW(Lmin) (kg) 4 00 485 Flow restrictor valve 400 bar G8 4 4 40 0.6 4 00 484 Flow restrictor valve 00 bar G4 00 55 6 00 0.5 KW C C 5 5 9 (max.) H V L C : cylinder connection V : valve connection V 9 art no. Description Max. orts Flow Weight press. (bar) (Lmin) (kg) 09 5 65 Flow restrictor valve 400 bar 8 40 0.5 Multi-section valve art no. Description ress. orts Flow (bar) B T (Lmin) 4 0 60 Section valve-080--ds-80-n 80 ½ ½ ¾ 80 4 0 60 Section valve-080--sd-80-n 80 ½ ½ ¾ 80 4 0 0 Section valve-080--dss-80-n 80 ½ ½ ¾ 80 4 0 80 Section valve-080-4-ddss-80-n 80 ½ ½ ¾ 80 4 0 85 Section valve-080-4-ddss-80-n 80 ½ ½ ¾ 80 4 0 80 Section valve-080-4-ssdd-80-n 80 ½ ½ ¾ 80 4 0 0 Section valve-40--ds-80-n 80 ¾ ¾ 40 4 0 5 Section valve-40--ds-0-n 0 ¾ ¾ 40 4 0 0 Section valve-40--sdd-0-l 0 ¾ ¾ 40 4 0 0 Section valve-40--ssd-80-n 80 ¾ ¾ 40 4 0 0 Section valve-40-4-ddss-80-n 80 ¾ ¾ 40 4 05 500 Section valve-60--dds-0-n 0 60 4 05 550 Section valve-60--dsd-5-l 5 60 5 4 8 : pump connection : tank connection" : section connection 4 : section connection 5 : air actuator 6 : socket for handle : pressure relief valve 8 : port relief valve 6 D = double acting section S = single acting section N = pneumatic operated L = lever operated
ress. relief & non ret. valve ressure relief valve CM-SE art no. Description Max. ort Flow Weight press. (bar) Hydr. Cyl. (Lmin) (kg) 4 0 0 Valve pressure relief CM-SE-50 50 G SE 50.5 4 0 50 Valve pressure relief CM-SE-0 0 G SE 50.5 80 C Ø0,5(4x) 65 65 80 5,4 6, T Ø8,5(4x) : pump connection = C : cyl. SE connect. = T : tank connection = R : pressure relief cartridge 8 R Spare parts pos. part no. description 4 0 55 body 4 0 54 cartridge 50 4 0 56 cartridge 0 4 0 5 O-ring Non return valve art no. Description Max. Flow Weight L L L SW ØD ØD press (Lmin) (kg) (mm) (mm) (mm) (mm) ( ) ( ) 4 9 95 Non return valve BSOT 50 0 0. 48.5 8.5 5 4 This valve ensures that the oil flow can only travel through the hydraulic system in one direction (from to ). The 60 tapered -port can be connected to a swivel with internal 60 cone without a bonded seal. For all other types of connection a bonded seal (0 848) is needed to prevent leakage of oil. The -port of the valve must always have a bonded seal. Mounting torque of the valve is 00 Nm. L L SW L 60 D D