Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick. 2 eight Matl. (lbs./ft.) (+) G Y D US-2 2.000 A.8.44.72.2 0.72 A. A 0..88 A 8. US-64S 2.00.72.69 2.00.0 0.88 A. A.6 A 0.8 2. A. US-64S 2.00 4..9 2.22.0 0.88 A. A.6 A.44x.0 2.7 A 4. Indicates this chain is normally stocked. All others are made-to-order. Material: A = Alloy heat-treated; A = Alloy case-hardened. 2 US-64S sidebar thickness on roller links is.0" and pin link.44". US-2 is a bushing type chain and does not have rollers. of U.S. subaki to M (800)7-640
Standard Shuttle ar hain Standard Shuttle ar hain R D G S Standard Shuttle ar hain Specifications hain Width Pins Rollers Sidebars Attachments hain Dwg. ead nd Inside Weight No. No. Space Overall to L to L Width Dia. Matl. 2 Dia. Matl. 2 hick. eight Matl. 2 (lbs./ft.) (+) G D R S 2600 708 2.609 v. 6th 2.9.6...6 A. A..6 A.28.66 6. 2600 2204 2.609 v. 8th 2.9.6...6 A. A..6 A.28.66 6. 070 2276.07 v. 6th.6.89.67.0.6 A.2 A.8.7.28.66 8.8 Indicates this chain is normally stocked. All others are made-to-order. hain number 2600 has the slotted attachment hole on the cottered side only and hain number 070 has slotted attachment holes on both sides. 2 Material: A = Alloy case-hardened; A = Alloy heat-treated; = arbon heat-treated. of U.S. subaki to M 2 (800)7-640
Super Shuttle 4 Super Shuttle 4 Shuttle ar hain Super Shuttle 4 Shuttle ar hain Specifications hain Dimensions hain Width Pins ast lock Sidebars Attachments hain Dwg. Sidebar Overall Wgt. No. No. Style Overall hick. Inside Dia. Matl. Width Inside Matl. eight Matl. Space (lbs./ft.) A D G F I J K L 400 2806 4.00 S 2.88.0 2.44.94 A 2.8.8 ADI.7 v.6th.9 2.00.69 2.6.9 Indicates this chain is normally stocked. Material: A = Alloy heat-treated; ADI = Alloy ductile iron; = arbon heat-treated. 2 Indicates straight sidebar style. of U.S. subaki to M (800)7-640
Feeder reaker hain Drawing Number 707 Drawing Number 2288 and 2402 Feeder reaker hain Specifications hain Dimensions hain Width Pins ushings Sidebars xtended Pins Dwg. Over- ead nd Inside ole Weight No. Style all to L to L Width Dia. Matl. Dia. Matl. hick. eight Matl. Space Dia. Length Dia. Style (lbs./ft.) (+) G D F I J K 2288.000 S 2.00 2.28 2.72.88.99 AI.0 A.6 2.0 A v. 6th.9.8.6 -ead 9. 4.000 2402.000 S 2.00 2.28 2.72.88.99 AI.0 A.6 2.0 A v. 6th.9.8.6 Driv-Lok 9. 4.000 Pin 707.067 S 2 4.44 2.0 2.4.0.87 AI.0 A.0 2.2 A v. 6th.00 6.. -ead 6. Indicates this chain is normally stocked. Material: AI = Alloy heat-treated induction hardened; A = Alloy case-hardened; A = Alloy heat-treated. 2 Indicates straight sidebar style. of U.S. subaki to M 4 (800)7-640
Wash ox hain Wash ox hain Wash ox hain Specifications hain Dimensions hain Width Pins ushings Sidebars xtended Pins Dwg. With Inside Weight No. Style Overall xt.pin Width Dia. Matl. Dia. Matl. hick. eight Matl. Space Dia. (lbs./ft.) A G D F I J K L 44.07 S 2.44 4.69..7 A.2.8.7 v. 6th.7.2..88 9.8 Indicates this chain is normally stocked. All others are made-to-order. Material: A = Alloy case-hardened; = arbon heat-treated. 2 Indicates straight sidebar style. of U.S. subaki to M (800)7-640
Jig Washer hain Jig Washer hain K D G L L A M F J 6826 Jig Washer hain Specifications hain Width Pins ushings Sidebars Attachments hain Dwg. Over- ead nd Inside Weight Number No. all to L to L Width Dia. Matl. Dia. Matl. hick. eight Matl. (lbs./ft.) (+) G D A F J M L K 6826 K/K2 98 6.000 4.7 2.22 2. 2.8.88 AI.0 A.8 2.0x.00 2.6.7.69.00. v. 2nd 6826 K/K2 9442 6.000 4.7 2.22 2. 2.8.88 AI.0 A.8 2.0x.00 2.6.7.69.00. v. rd 6826 K/K2 9448 6.000 4.7 2.22 2. 2.8.88 AI.0 A.8 2.0x.00 2.6.7.69.00. v. 4th. 4.0.0 Material: AI = Alloy heat-treated induction hardened; A = Alloy case hardened; = arbon heat-treated. of U.S. subaki to M 6 (800)7-640
Drop Forged Rivetless hain X-Style Drop Forged Rivetless hain with xtended Pins A W F Standard Drop Forged Rivetless hain A W F Drop Forged Rivetless hain Specifications Attachments Average hain Drawing ensile Weight Number Number Strength Space (lbs./ft.) A W F X-678 87 6.0 8,000.8..88 2.00.69.09 2 xt..0.7 6.9 Pins v. 4th 698 262 6.0 0,000.00.6. 2.2.6.88 2 xt..0.7 2. Pins v. 4th Indicates this chain is normally stocked. of U.S. subaki to M 7 (800)7-640
Standard Model Mining Large Model ON-OU INSPION DOOR SANDARD ON-OU INSPION DOOR SPIFIAIONS Dimensions are in inches unless otherwise indicated. Style/Model No. Door Frame over Lever L Weight (lbs.) igh igh igh igh Regular igh Neck A Reg. Neck A A2 Reg. Neck Reg. Neck Qty. Reg. Neck Mild Steel ody, hrome-plated andle P P 8 2 4 6 /4 8 /2 9 2 /2 4 /2 4 /2 6 /2 4. 6 P2 P2 8 2 2 4 9 /4 2 /2 4 /2 4 /2 6 /2 6.6 9.2 P P /4 9 /4 2 4 7 /4 20 /4 2 /2 4 /2 4 /2 6 /2 2.2 7.6 P4 9 /4 2 /2 N/A 20 /4 2 /4 24 /4 /2 N/A 4 /2 N/A 2 24.2 N/A 04 Stainless Steel ody, hrome-plated andle Q Q 8 2 4 6 /4 8 /2 9 2 /2 4 /2 4 /2 6 /2 4. 6 Q2 Q2 8 2 2 4 9 /4 2 /2 4 /2 4 /2 6 /2 6.6 9.2 Q Q /4 9 /4 2 4 7 /4 20 /4 2 /2 4 /2 4 /2 6 /2 2.2 7.6 Q4 9 /4 2 /2 N/A 20 /4 2 /4 24 /4 /2 N/A 4 /2 N/A 2 24.2 N/A 04 Stainless Steel ody, 04 Stainless Steel andle R R 8 2 4 6 /4 8 /2 9 2 /2 4 /2 4 /2 6 /2 4. 6 R2 R2 8 2 2 4 9 /4 2 /2 4 /2 4 /2 6 /2 6.6 9.2 R R /4 9 /4 2 4 7 /4 20 /4 2 /2 4 /2 4 /2 6 /2 2.2 7.6 R4 9 /4 2 /2 N/A 20 /4 2 /4 24 /4 /2 N/A 4 /2 N/A 2 24.2 N/A 6L Stainless Steel ody, hrome-plated andle QS QS 8 2 4 6 /4 8 /2 9 2 /2 4 /2 4 /2 6 /2 4. 6 QS2 QS2 8 2 2 4 9 /4 2 /2 4 /2 4 /2 6 /2 6.6 9.2 QS QS /4 9 /4 2 4 7 /4 20 /4 2 /2 4 /2 4 /2 6 /2 2.2 7.6 6L Stainless Steel ody, 04 Stainless Steel andle RS RS 8 2 4 6 /4 8 /2 9 2 /2 4 /2 4 /2 6 /2 4. 6 RS2 RS2 8 2 2 4 9 /4 2 /2 4 /2 4 /2 6 /2 6.6 9.2 RS RS /4 9 /4 2 4 7 /4 20 /4 2 /2 4 /2 4 /2 6 /2 2.2 7.6 Note: Inches are rounded to the nearest /4. ON-OU INSPION DOOR is a registered trademark of subaki onveyor of America, Inc. LARG ON-OU INSPION DOOR SPIFIAIONS Dimensions are in inches unless otherwise indicated. Door Opening over Lever Model No. A A L Qty. Weight (lbs.) L 29 /2 9 /4 4 /4 24 /2 /4 /4 80 L2 9 /4 2 /2 44 0 /4 /4 /4 6 L 47 /4 /2 2 6 /4 /4 /4 8 4 Note: Dimensions are rounded to the nearest /4. of U.S. subaki to M 8 (800)7-640
ngineering hain Sprocket Selection Guidelines U.S. subaki manufactures a complete line of ngineering hain Sprockets for your mining operation. o make ordering as easy as possible, able shows the general information you need to provide. On your order form, indicate the Sprocket Order No. his number is composed of the chain number, the hub type, the number of teeth, the locking device (if any is required), and the bore size. able Information Necessary to Order Sprockets. hain Size Number, type, or drawing number of the chain to be used on the sprocket. (he suitability of a sprocket depends on specific chain dimensions: chain pitch, rollers, bushing diameter, inside width of chain or roller face.) 2. eeth he number of actual teeth on the sprocket. If applicable, the number of working teeth, mid-pitch relief, or gap-toothed construction should be specified. his is necessary when driving conveyors with special through-rods or attachments which will interfere with the engagement. Special outer diameters are sometimes required to clear attachments.. Material a. Steel Plate welded hub, plain or with flame hardened teeth b. ast Iron, plain, or hard rim c. ast Steel, plain or with flame hardened teeth d. Special materials such as stainless steel, bronze, etc. State preference and alternate if acceptable 4. ub ype ub ub Offset ubs Plate Only One Side oth Sides on oth Sides ype A ype ype ype Offset Shear Pin ubs: ype A is entirely self-contained with sprocket bored for running fit over flanged hub. ype has sprocket bored for running fit over shaft. Material: Steel plate welded hub.. xact Diameter Show special tolerances; keyway size; keyway location when of Shaft ore required. If not a standard keyway specify: straight, tapered, square or flat and dimensions. (See able 2.) 6. Set Screws If not a standard, specify type. If more than one or special position is required, indicate the number and location. (See able.) able 2 olerances for oring Sprockets Diameter of Shaft olerances and under Nominal plus.00 Over to 2 Nominal plus.002 Over 2 to Nominal plus.00 Over to 4 Nominal plus.004 4 and over Nominal plus.00 able Standard Keyways and Set Screws Keyseat Diameter Diameter of of Shaft Width Depth Set Screw 2 9 6 7 6 6 6 2 6 6 2 7 6 6 6 2 2 2 6 2 6 2 6 6 7 7 6 6 4 2 2 4 9 6 2 All dimensions are in inches unless otherwise specified. Note: If not a standard keyway or set screw, call the U.S. subaki ngineering hain Division for assistance. 0 6 2 7 7. ub hese measurements are usually manufacturers standard. Dimensions owever, for special orders, outside diameter and through length should be specified. For ype Offset Sprockets, specify the length from the centerline of the chain to each side and the total through length. M 9 (800)7-640