ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2
SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type 5/112 (NEMA 16A) MEDIUM TO HEAVY DUTY (NEMA 2B) HEAVY DUTY (NEMA 2C) EXTRA HEAVY DUTY > 4:3 > 4:4 > 4:5 Type 4/7 Type 3/5 Type 5/112 (NEMA 12A) MEDIUM DUTY (NEMA 2A/16B) HEAVY DUTY (NEMA 2C) EXTRA HEAVY DUTY > 4:7 > 4:8 > 4:9 Ladder Splice Plates > 3:18 Page 4:1
Cable Ladder General Description The Kounis Metal Industries Cable Ladder Systems were developed for use in commercial, industrial & mining applications where the surrounding environment calls for a higher level of protection against corrosion. Its superior support strength and open ventilation allows for effortless installation of electrical cables and or pipe work. Cable Ladder General Description The finished product is constructed from 316 Grade side rail sections and rungs welded at mm continuous spacings. Surface treatment is post production pickling and passivation with the focus of ensuring all weld joints are clean to achieve a maximum life span from the installation. This product range comprises of three system types to cover a wide range of requirements; Type 3/5 Medium to Heavy Duty mm Side (NEMA 16A), Type 4/7L Heavy Duty 13 mm Side and Type 5/112 Extra Heavy Duty 146 mm Side (NEMA 2C). All of which offer the following standard features: 6 m lengths Self-splicing Bend, Riser, Tee & Cross Fittings. Rail in or rail out option ing holes at point of connection on straight lengths as well as fittings Channel type rung offering superior strength 25 mm rung tie off centres to allow maximum tie off options Hold Down Clamps assemblies with nylon isolation pads and bushes are available for dissimilar materials. A full range of flat and peak covers are available for straight lengths and fittings Engineer certification to withstand certain cyclonic conditions (only available for Type 4/7 & 5/112, minimum installation requirements apply). All fitting radius measurements are to the internal side rail, stock standard radius varies depending on cable ladder system type and branch standard. All other listed radius options are made to firm order. Load capacities and deflection graphs are published by type and can be found on the straight length page for the associated cable ladder system. Tested to NEMA VE1-22 Standards. Full engineering details are available on request. Page 4:2
Cable Ladder Medium To Heavy Duty Type 3/5 16A 1.6 mm 316 Grade Cable Ladder Type 3/5 2 24 76 mm Cable 6 2 x 8 Slots @ 25 Ctrs 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 78kg/m on 4.8m spans Class Designation: Cable ladder-medium to heavy duty type 3/5. Material: 316 stainless steel sheet. Natural. Spacing: mm spacings with slotted rung standard. Inside Depth: 76 mm cable laying depth. Stock Length: 6 mm standard, joining together by full strength splice plates Stock Widths: 15 mm, mm, 45 mm & 6 mm standard. Other widths available by request. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 25 2 2 15 (Tested by Curtin University to NEMA 113 standards) full engineering = 1.5 over details collapse available. 78 load for single span. 5 5 14 12 8 6 4 2 5 1 15 2 25 3 35 Medium to Heavy Duty Type 3/5 Cable Ladder 3C L 15 S K RI or RO 3C = 3/5 mm High Side 1.6 mm Gauge L = Straight 6 metre Length 15 = 15 mm 316 Grade RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm K = Includes all Standard Supply is Mill Finish ORDERING EXAMPLE SHOWN: 3/5 Cable Ladder 15 mm wide x 6 metre 316 c/w Splice Plates Bolts and Nuts Page 4:3
Cable Ladder Heavy Duty Type 4/7L 2B 1.6 mm 316 Grade Cable Ladder Type 4/7L 13 25 24 15mm Cable. 6 2 x 8 Slots @ 25 Ctrs 13. 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 95kg/m on 6m spans. Heavy Duty Type 4/7L Cable Ladder 13 Class Designation: Material: Spacing: Inside Depth: Stock Length: Stock Widths: Accessories: Cable ladder heavy duty type 4/7L. 316 stainless steel sheet. Natural. mm spacings with slotted rung standard. 15 mm cable laying depth. 6 mm standard, joining together by full strength splice plates. 15 mm, mm, 45 mm and 6 mm standard. Other widths available by request. A full range of fittings are available e.g bends, risers, tees, crosses & reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 5 4 378 213 = 1.5 over collapse 2 load for single span. 148 (Tested by Curtin University to NEMA standards) full engineering details available. 95 25 2 15 5 1 2 3 4 4CL L 15 S K RI or RO 4CL = 4/7L 13 mm High Side 1.6mm Gauge L = Straight 6 metre Length 15 = 15 mm 316 Grade RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm K = Includes all Standard Supply is Mill Finish ORDERING EXAMPLE SHOWN: 4/7L Cable Ladder 15 mm wide x 6 metre 316 c/w Splice Plates Bolts and Nuts Page 4:4
Cable Ladder Extra Heavy Duty Type 5/112 2C 2. mm 316 Grade Cable Ladder Type 5/112 146 32 24 12 mm Cable 6 2 x 8 Slots @ 25 Ctrs 146 146 Class Designation: Cable ladder extra heavy duty type 5/112. Material: 316 stainless steel sheet. Natural. Spacing: mm spacings with slotted rung standard. Inside Depth: 12 mm cable laying depth. Stock Length: 6 mm standard, joining together by full strength splice plates. Stock Widths: 15 mm, mm, 45 mm and 6 mm standard. Other widths available by request. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 6 7 6 561 5 4 315 219 2 14 4 35 25 2 15 5 5 1 15 2 25 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 14kg/m on 6m spans. = 1.5 over collapse load for single span. Extra Heavy Duty Type 5/112 Cable Ladder 5C L 15 S K RO 5C = 5/112 146 mm High Side 2. mm Gauge L = Straight 6 metre Length 15 = 15 mm 316 Grade RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm K = Includes all Standard Supply is Mill Finish ORDERING EXAMPLE SHOWN: 5/112 Cable Ladder 15 mm wide x 6 metre 316 c/w Splice Plates Bolts and Nuts. Page 4:5
Cable Ladder General Description The Kounis Group Cable Ladder Systems are developed for use in commercial, industrial & mining applications. Its superior support strength and open ventilation allows for effortless installation of electrical cables and or pipe work. The finished product is constructed from Grade 616 T6 Extruded Alloy side rail sections has rungs welded at mm continuous spacings. Ladders have a post production treatment with the focus on ensuring all weld joints are clean to achieve a maximum life span from the installation. This product range comprises three system types to cover a wide range of requirements; Type 3/5 Medium Duty 9 mm Side (NEMA 12A), Type 4/7 Heavy Duty 13 mm Side (NEMA 16B and NEMA 2A) and Type 5/112 Extra Heavy Duty 155 mm Side (NEMA 2C). All of which offer the following standard features: 6 m length Self-splicing Bend, Riser, Tee & Cross Fittings Cable Ladder General Description ing holes at point of connection on straight lengths as well as fittings Channel type rungs offering superior strength 25 mm rung tie off centres to allow maximum tie off options Use of stainless steel fixings required A full range of flat and peak covers are available for straight lengths and fittings All fitting radius measurements are to the internal side rail, stock standard radius varies depending on cable ladder system type and branch standard. All other listed radius options are made to firm order. Load capacities and deflection graphs are published by type and can be found on the straight length page for the associated cable ladder system. Tested to NEMA VE1-22 Standards, Full engineering details are available on request. Page 4:6
Cable Ladder Medium Duty Type 3/5 12A Grade 616 T6 Cable Ladder Type 3/5 2 24 63 mm Cable 9 6 2 x 8 Slots @ 25 Ctrs 9 9 s in Place Class designation: Cable ladder medium duty type 3/5. Material: 616-T6 Marine Grade Aluminum Alloy Grade 316 fastenings Standard Mill Finish spacing: mm spacings with slotted rungs standard. Inside depth: 63 mm cable laying depth. Stock length: 6 mm standard, joining together by full strength splice plates Stock widths: 15 mm, mm, 45 mm and 6 mm standard. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 74kg/m on 4m spans 2 15 5 132 74 52 33 8 7 6 5 4 3 2 1 1 2 3 4 5 6 = 1.5 over collapse load for single span. Medium Duty Type 3/5 Cable Ladder 3C L 15 A K RI or RO 3C = 3/5 9mm High Side Extrusion L = Straight 6 metre Length 15 = 15 mm A = 616-T6 K = includes all RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm Standard supply is Mill Finish ORDERING EXAMPLE SHOWN: 3/5 Cable Ladder 15 mm wide x 6 metre c/w Splice Plates Bolts and Nuts Page 4:7
Cable Ladder Heavy Duty Type 4/7 2A/16B Grade 616 T6 Cable Ladder Type 4/7 13 25 24 15 mm Cable 6 2 x 8 Slots @ 25 Ctrs Heavy Duty Type 4/7 616 T6 Cable Ladder 13 13 Class designation: Cable ladder heavy duty type 4/7. Material: 616-T6 Marine Grade Aluminum Alloy Grade 316 fastenings Standard Mill Finish spacing: mm spacings with slotted rungs standard. Inside depth: 15 mm cable laying depth. Stock length: 6 mm standard, joining together by full strength splice plates Stock widths: 15 mm, mm, 45 mm and 6 mm standard. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 79kg/m on 6m spans. 121kg/m on 4.8m spans. 4 35 324 25 2 182 = 1.5 over collapse 15 121 load for single span. (Tested by Curtin University to NEMA standards) full engineering details available. 79 5 2 15 5 1 2 3 4 5 4C L 15 A K RI or RO 4C = 4/7 13 mm High Side Extrusion L = Straight 6 metre Length 15 = 15 mm A = 616-T6 K = includes all RI = RO = rail Out NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm Standard supply is Mill Finish ORDERING EXAMPLE SHOWN: 3/5 Cable Ladder 15 mm wide x 6 metre c/w Splice Plates Bolts and Nuts Page 4:8
Cable Ladder Extra Heavy Duty Type 5/112 2C Grade 616 T6 Cable Ladder Type 5/112 37 134 mm Cable 156 2. NOM "W" 6 156 "W" Strap Hole 2 x 8 Slots @25 Ctrs 156. "W" NOM Strap Hole 6 Class designation: Cable ladder extra heavy duty type 5/112. Material: 616-T6 Marine Grade Aluminum Alloy Grade 316 fastenings Standard Mill Finish spacing: mm spacings with slotted rungs standard. Inside depth: 13 mm cable laying depth. Stock length: 6 mm standard, joining together by full strength splice plates Stock widths: 15 mm, mm, 45 mm and 6 mm standard. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 14kg/m on 6m spans 7 6 572 5 4 322 = 1.5 over collapse (Tested by Curtin University to NEMA standards) full engineering load for details single span. available. 224 2 143 35 25 2 15 5 1 2 3 4 Extra Heavy Duty Type 5/112 616 T6 Cable Ladder 5C L 15 A K RI or RO 5C = 5/112 156mm L = Straight 6 metre Length 15 = 15 mm A = 616-T6 K = includes all High Side Extrusion NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm RI = RO= Standard supply is Mill Finish Ordering example shown 5/112 Cable Ladder 15mm wide x 6 metre c/w Splice Plates Bolts & Nuts Page 4:9
Notes (Stainless & ) Page 4:1