Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission rate of flexible films, sheets, foils and packages. It can test 3 specimens in one operation with average results. ISO 15105-2, ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, JIS K7126-2 OX2/230 i-oxtra 7700 Oxygen Transmission Rate Test System This system is based on the coulometric sensor method and available for the OTR test of flexible films, sheets, foils and packages. It can test 3 specimens in one operation with independent results. ISO 15105-2, ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, JIS K7126-2 VAC-V1 VAC-V1 is based on the differential pressure method and can be used to measure gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of flexible films. It can test O2, N2 and CO2. ISO 15105-1, ISO 2556, ASTM D1434, JIS K7126-1 VAC-V2 i-gastra 7100 This equipment is based on differential pressure method and used to measure Gas (O2, N2 or CO2) transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of flexible materials. It is equipped with 3 test cells for different specimens with independent results. ISO15105-1, ISO 2556, ASTM D1434, JIS K7126-1 VAC-V3 This tester is used to measure gas (O2, N2 or CO2) transmission rate as well as solubility coefficient, diffusion coefficient, and permeability coefficient of flexible films. It is advaced with 6 test cells, which are in two groups with different accuracy. ISO15105-1, ISO 2556, ASTM D1434, JIS K7126-1 VAC-VBS This tester is based on differntial pressure method and used to measure gas permeability of plastic films, sheeting, paper, foils and etc. This equipment can test 3 specimens with average results in one operation. ISO 15105-1, ISO 2556, ASTM D1434, JIS K7126-1
DM2/330 This is an advanced gas permeability tester. The equipment is based differential and equal pressure method and conforms to various international standards. ISO 15105-1, ISO 15105-2, ISO 2556, ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ASTM D1434 BTY-B2P This is specially designed for battery separators. It can have 3 equivalent specimens tested simultaneously with average test results. ISO 5636, SJT 1071.9 G2/130 Container G2/130 is based on differential pressure method, and can be used to measure gas transmission rate of flexible containers, including various bottles of carbonated drinks, juice, tea and packages of edible oil, dairy products, washing supplies and metal containers. OR2/410 Organic Gas Transmission Rate Test System OR2/410 is professionally applicable to the quantitative determination of organic gas transmission rate of films, composite films, sheeting, and packages. G2/131 i-gastra 7210 G2/131 is based on differential pressure method to measure gas permeability of plastic films, sheeting, paper and etc. It is adopts Labthink patent design and can test 3 specimens with independent results. ISO 2556, ISO 15105-1, ASTM D1434, JIS K7126-1 G2/132 i-gastra 7200 G2/132 is designed to measure gas permeability as well as solubility coefficient, diffusion coefficient and permeability coefficient of flexible films. It is adopts Labthink patent design and can test 3 specimens with average results in one operation. ISO 2556, ISO 15105-1, ASTM D1434, JIS K7126-1 W3/330 i-hydro 7500 Water Vapor Transmission Rate Test System This test system is based on the electrolytic sensor method, which are available for the WVTR test of flexible films, sheets, foils and packages. This equipment adopts Labtink patent design and can test 3 specimens with independent results. ISO 15106-3, DIN 53122-2
W3/230 i-hydro 7900 Water Vapor Transmission Rate Test System This test system utilizes the infrared sensor method to test the WVTR of flexible films, sheets, foils and packages. It can test 3 specimens with independent results. ISO 15106-2, ASTM F1249, TAPPI T557, JIS K7129 W3/030 i-hydro 7300 Water Vapor Transmission Rate Tester This tester is based on gravimetric method (cup method) and can be used to determine WVTR of flexible films, sheets, foils and etc. It is equipped with 3 test cups for accurate test. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208 W3/031 i-hydro 7310 Water Vapor Transmission Rate Tester This tester is based on the gravimetric method and available for the WVTR test of flexible films, sheets and foils. It is equipped with 3 test cups and can test 3 specimens independently. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208 W3/130 i-hydro 7400 Water Vapor Transmission Rate Tester This Tester is based on the humidity sensor method, are designed to measure the WVTR of flexible films, sheets, foils and etc. It has 3 test cups, which can test independently. ISO 15106-1, ASTM E398, TAPPI T523, JIS K7129 W3/060 i-hydro 7320 Water Vapor Transmission Rate Test System This test system is based on the gravimetric method to determine the WVTR of flexible films, sheets and foils. It is advaced with 6 test cups for 6 different specimens. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208 W3/062 Water Vapor Transmission Rate Test System This test system is based on the gravimetric method to determine the WVTR of flexible films, sheets and foils. It is advaced with 6 test cups for 6 different specimens. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208 W3/0120 Water Vapor Transmission Rate Tester W3/0120 is based on the gravimetric method, which is available for water vapor transmission rate test of flexible films and sheets. It is advaced with 12 test cups for different specimens. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208
TSY-W3 Water Vapor Permeability Tester This equipment utilizes electrolytic detection method. It is a basic type and designed for WVTR test of flexible films, sheets and foils. ERT-01 i-resitest 8100 Evaporation Residue Constant Weight Tester This tester is professionally designed for the precise mass determination of dissolved substances of samples. ISO 15106-3, DIN 53122-2 GBT 5009.60-2003, GB/T 5009.64-2003, GB/T 5009.68-2003, GB/T 5009.69-2008, GB/T 5009.203-2003, GB/T 9740-2008 XLW(B) Auto Tensile Tester XLW(B) Tensile Tester is a basic type to measure physical force of plastic films, textiles, adhesive tapes and etc. It can be used for tensile strength and elongation, peeling force, seal strength test and so on. GB/T 4850-2002, GB8808, GB/T 1040.3-2006, GB/T17200, GB/T2790, GB/T2791, GB/T2792, QB/T2358 XLW Auto Tensile Tester XLW is professional designed for tensile strength, elongation test for plastic films, sheeting materials. This equipment can also be used for peeling, seal strength, tearing test for extention. XLW(M) i-strentek 1200 Auto Tensile Tester This tester is professionaly designed for flexible materials physical properties test. It is designed according to various international standards and can be used for tensile strength, elongation, peeling, seal strength test and etc. XLW(PC) Auto Tensile Tester XLW(PC) is professional designed for tensile strength, elongation test, peeling test and other physical properties test for flexible materials with high accuracy (0.5%) and extra-long stroke. ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 XLW(EC) i-strentek 1100 Auto Tensile Tester This tensile tester is newly designed with features of bidirectional movement for tensile and compression test. It is also be used for open force for bottle caps, puncture test, peeling test and etc with high accuracy (better than 0.5%) ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113
XLW(G6) Auto Tensile Tester XLW(G6) is used to measure tensile strength and elongation rate of flexible materials. This instrument is equipped with 6 test stations can measure 6 spciements in one time. MED-01 i-meditek 1300 Medical Packaging Tester This tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges. BLD-200N Auto Stripping Tester BLD-200N can be used for peeling and stripping tests of adhesives, protective films, release paper, laminated films, leatheroid, woven bags, films and paper. ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 GB/T4850-2002, GB8808, GB/T1040.3-2006, GB/T 17200, GB/T 2790, GB/T 2791, GB/T 2792, QB/T 2358 NLW-20 Adhesive Tensile & Shear Tester NLW-20 is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives. ISO 4587, ASTM D1002, ASTM D2095, ASTM D3165, ASTM D2339, JIS K6850, JIS K6849 XYD-15K Box Compression Tester XYD-15K is designed for measurement of compressing resistance, shape change and stacking capability of cartons, beehive crates, and other packages. ISO 12048, ASTM D642, ASTM D4169,TAPPI T804, JIS Z0212 i-boxtek 1700 Box Compression Tester i-boxtek 1700 is newly designed for the determination of compressive resistance, deformation and stacking capability of cartons and beehive crates. ASTM D4169, ASTM D642, TAPPI T804, ISO 12048, JIS Z0212 NJY-20 Digital Torque Tester NJY-20 is an manual torque tester to measure open force and closure force of the caps of bottles, suction and flexible tube packages. ASTM D2063, ASTM D3198, ASTM D3474
HST-H3 Heat Seal Tester HST-H3 is used to seal specimen for further determination of seal temperature, pressure and time of plastic films. It is equipped with up and low sealing draws. ASTM F2029 HST-H6 Heat Seal Tester HST-H6 is designed to measure seal temperature, seal pressure and seal time of flexible films. This is a basic type with one sealing jaw. ASTM F2029 GHS-03 Gradient Heat Seal Tester GHS-03 is designed for the determination of heatsealability of plastic films, composite films, coated paper, and other sealing films under certain sealing speed, pressure and 5 different temperatures. ASTM F2029 CLASSIC 513 Gradient Heat Seal Tester CLASSIC 513 is designed for the determination of heatsealability of plastic films, composite films, coated paper, and other sealing films under certain sealing speed, pressure and 5 different temperatures. ASTM F2029 HTT-L1 i-thermotek 2500 Hot Tack Tester This tester is used to determine hot tack property test for plastic films, laminated films and other packaging films. Meanwhile, it is also used for peel, shear, tension and other test items for adhesives and laminated films. ASTM F2029, ASTM F1291 PSST-100 Portable Heat Seal Strength Tester PSST-100 is a portable heat seal strength tester for plastic films, composite films and other materials. This instrument is suitable for on-site quantitative inspection. QB/T 2358 MXD-01 Coefficient of Friction Tester MXD-01 is designed to measure static and kinetic coefficients of friction of plastic films, sheeting, textiles and other materials, according to GB 10006. GB 10006
MXD-01A Coefficient of Friction Tester MXD-01A is used to measure static and kinetic coefficients of friction of plastic films, paper, rubber, textiles and non-wovens, according to ASTM D1894. ASTM D1894 MXD-02 i-coftek 3300 Coefficient of Friction Tester This is used to precisely determine static and kinetic coefficient of friction of plastic films, paper and paperboard, rubber, textiles with high accuracy (0.5 of FS). ISO 8295, ASTM D1894, TAPPI T816 COF-P01 Inclined Surface Coefficient of Friction Tester COF-P01 is used to measure the static coefficient of friction on a inclined surface of paper, cardboard, plastic films, sheets, and conveyor belt and etc. ASTM D202, ASTM D4918, TAPPI T815 FPT-F1 i-coftek 3500 Friction & Peel Tester This is designed for the friction coefficient test of films as well as peel strength test of adhesives. ISO 8295, ISO 8510-2, ASTM D1894, ASTM D4917, ASTM D3330, TAPPI T816, TAPPI T549 CHY-C2A Thickness Tester This thickness tester is based on the contacting method, is available for the thickness test of specimens with LCD display. CHY-CA i-thickness 4400 Thickness Tester This Thickness Tester is designed with automatic specimen feeding feature, which is used for thickness test of specimens within 12mm. CHY-CB i-thickness 4100 Thickness Tester This thickness tester is designed to precisely measure thickness of plastic films, sheeting, paper and other materials within 12mm. Test results include maximum, minimum and average value. ISO 4593, ISO 534, ISO 3034, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702 ISO 4593, ISO 534, ISO 3034, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702 ISO 4593, ISO 534, ISO 3034, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702
SLY-S1 i-lacera 5500 Tear Tester This is based on Elmendorf method to measure tearing strength of plastic films, foils, textiles and non-woven materials. ISO 6383-1-1983, ISO 6383-2-1983, ISO 1974, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414 BMC-B1 Falling Dart Impact Tester This is designed to measure impact resistance property of plastic films, paper and other packaging materials using free falling dart method. ISO 7765-1, ASTM D1709, JIS K7124-1 FDI-01 i-freefall 5100 Falling Dart Impact Tester This tester is designed to measure impact resistance property of plastic films, sheeting, paper and foils. It is based on free falling dart method and equipped wtih LCD display. ISO 7765-1, ASTM D1709, JIS K7124-1 FIT-01 i-pendum 5200 Pendulum Impact Tester This tester is professionally designed for plastic films to measure impact resistance property by pendulum method. ASTM D3420, NF T54-116 RSY-R2 Film Free Shrink Tester This tester is designed for the heat shrinkage test and size stability test of films in liquid medium at various temperatures. ASTM D2732 FST-02 i-thermotek 2710 Film Thermal Shrinkage Tester This tester is based on ISO 14616 and designed for determination of shrinking force, contracting force and shrinkage ratio of heatshrinkable films. ISO 14616, DIN 53369 MFY-01 Leak Tester MFY-01 is designed for gross leak test of packages for food, drugs, medical instruments, daily chemical products, cars, electronic components, stationeries and other industrial products. ASTM D3078
LSSD-01 i-leaktek 6600 Leak and Seal Strength Tester This tester is used to measure leak and seal strength of packages. It can be used to conduct burst, creep and creep to failure test. ISO 11607, ASTM F1140, ASTM F2054 HGA-02 Headspace Gas Analyzer HGA-02 can provide accurate and fast evaluation of the volumes and proportions of O2 and CO2 in sealed packages. HGA-03 i-gasatek 6900 Package Headspace Analyzer This analyzer provides accurate and fast evaluation of the volumes and proportions of O2 and CO2 in sealed packages on production lines, at warehouses or in laboratories. RGT-01 i-vacupack 6100 Vacuum Packaging Analyzer This analyzer provide the quantitative analysis of seal performance and residual oxygen for vacuum packages. FDT-02 i-flexdura 9100 Flex Durability Tester This tester can simulate the kneading and creasing behaviors of films happened during production, processing and transportation, by which the flex durability of samples can be determined. ASTM F392 CZY-G Primary Adhesive Tester CZY-G utilizes rolling ball method to measure the primary adhesive property of adhesives. JIS Z0237, GB/T 4852 CZY-6S Lasting Adhesive Tester CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesives. ASTM D3654, JIS Z0237
SBG-80 D65/A Standard Light Source SBG-80 D65/A is equipped with double light source and is available for the color evaluation and comparison. SPS-80T Double Light Source Viewer SPS-80T is designed for the all-day color evaluation and comparison. MCJ-01A Rub Tester MCJ-01A is used to measure abrasion resistance of surface layers of printed materials. GB/T 7706 RT-01 Ink Rub Tester RT-01 is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. ASTM D5264, TAPPI T830 YGJ-02 Adhesive Tape Roller YGJ-02 is kind of sample preparing device, working with BLJ-02 to test ink fastness. JIS C2107, JIS Z0237, GB/T 7707 BLJ-02 Disk Stripping Tester BLJ-02 is professionally used to test ink fastness of plastic films and printed materials. JIS C2107, JIS Z0237, GB/T 7707 GC-6890 Gas Chromatograph GC-6890 is used to measure residual solvent, smell analysis, and solvent purity for packaging industry or other related industries.
GC-7800 Gas Chromatograph GC-7800 is widely used to test the relative indexes of various materials, gases, smell, residue, and cigarette packages, because of its powerful functions and high sensitivity. GC-7800 Gas Chromatograph with Autosampler GC-7800 with autosampler is designed for gas chromatographic analysis and control of testing organizations, research institutions, packaging companies as well as food and pharmaceutical industries. FT-F1 Fogging Tester FT-F1 is professionally applicable to the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts at high temperature conditions. ISO 6452, DIN 75201, SAE J1756, QB/T 2728, BS EN 14288, PV 3920, PV 3015, ES-X83231, NES M0161, D45 1727, GM 9305P, TSM 0503G TQD-G1 Air Permeability Tester TQD-G1 is professionally applicable to the determination of air permeability of decorating materials used in cars, e.g. polyurethane, expanded plastics, PVC, leather, textiles, nonwoven and other materials. ISO 9237, ISO 4638, ISO 5636, ASTM D737, TAPPI T460, JIS P8117 i-process 6200 Leak Test and Data Processing System i-process 6200 is professionally designed for the on-site leakage test of packages used for food, pharmaceuticals and other industries. ASTM D3078 i-process 6610 Leak & Seal Test and Data Processing System i-process 6610 is professionally used for the on-site measurement of seal strength, seal quality, bursting pressure, compression resistance and leakage of flexible packages, aseptic packages and many others. ISO 11607, ASTM F1140, ASTM F2054 i-process 6910 Headspace Gas Test and Data Processing System i-process 6910 is professionally used to test the volume and proportion of O2 and CO2 left in sealed packages.
i-process 9200 Volume & Weight Analyzer Test and Data Processing System i-process 9200 is professionally used to test weight and volume of packaging bags and bottles. i-process 1600 Torque Test and Data Processing System i-process 1600 is professionally designed for the on-site torque value determination of caps used in bottles, spout pouches and flexible tube packages. ASTM D2063, ASTM D3198, ASTM D3474