PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS TRANSFER ARM HEADS EJECT CYLINDERS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P We understand your unique requirements Focused on the specific needs of the plastic packaging industry, PHD offers many direct replacements for Sidel and Krones machines such as stretching cylinders, nozzle and needle cylinders, and transfer arms. PHD also provides the added benefit of unique designs. Our built-to-need designs address your specific application issues. Our components are the actuators of choice. Designed for long life, PHD products keep your blow molding lines running while increasing productivity and reducing downtime and scrap. We also offer the added benefit of our rebuild program which refurbishes your existing PHD components, enabling even longer service life and savings. See page 12 for more information. Krones Replacement Reference Chart & Contents Stretching Cylinders with Valve PHD MODEL WITH VALVE PAGE 0-900-99-743-0 BCK1-5-50 x 390-DR-U23 or BCK1-5-50 x 390-DR-U19 0-902-52-569-9 BCK1-5-50 x 390-DR-U23 or BCK1-5-50 x 390-DR-U19 0-902-52-268-9 BCK2-5-50 x 390-DR-U23 or BCK2-5-50 x 390-DR-U19 0-901-85-956-4 BCK2-5-50 x 390-DR-U23 or BCK2-5-50 x 390-DR-U19 0-902-18-438-0 BCK2-5-50 x 390-DR-U23 or BCK2-5-50 x 390-DR-U19 3 Nozzle Cylinders PHD Model High-Pressure Nozzle Bell Seal ML310864 10 Transfer Arms PHD Model Transfer Arm Head ML311628 10 Eject CylinderS PHD Model 25 mm Bore x 25 mm Stroke ML310656 11 25 mm Bore x 8.5 mm Stroke ML309880 11 Any marks or names referenced herein are either registered trademarks or trademarks of their respective owners. No association with or endorsement of any company, organization, or product is intended or should be inferred. Copyright 2016, by PHD, Inc. All Rights Reserved. Printed in the U.S.A. PHD also offers replacement components for SIDEL machines To request a free brochure, visit www.phdinc.com/resources/inforequest/ 2 www.phdinc.com (800) 624-8511
BCK Stretching Cylinder Krones Direct Replacement MAJOR BENEFITS Direct OEM replacement Single pressure operation ISO 2 valve compatible Retract cushion control factory set for retract end of stroke deceleration Cylinders easily field repairable to maximize investment Internal shock pads standard on extend and retract Food grade lubrication throughout Shown with optional MAC valve -U19 installed MAC valve for faster valve response rugged and lightweight aluminum alloy head, cap and tube increased capacity cushion controls are preset at factory to reduce field adjustment errors and increase life of cylinder built-in shock pads are standard and absorb impact energy, eliminate metal to metal contact, reduce end of stroke shock and increase unit life PTFE wear ring provides piston support and enhances durability and performance urethane piston and rod seals for long life chrome-plated alloy steel piston rod for maximum life flanged bearing is retained for extreme applications flange is a direct interface for OEM equipment rod seal retention ring for extreme applications retract locking cylinder provides retention of rod in retracted position on E-stop (Only available on BCK2) retract cylinder speed set at factory with fixed port orifice, no adjustment required mufflers with woven wire baffles stay cleaner longer than sintered baffles Shown with optional MAC valve -U23 installed www.phdinc.com (800) 624-8511 3
ORDERING DATA: SERIES BCK STRETCHING CYLINDERS TO ORDER SPECIFY: Product Line, Series, Type, OEM Cylinder No., Design No., Bore Size, Metric Stroke, Mandatory Option, and Cylinder Options if required. OEM CYLINDER NO. 1 - Without retract lock 0-900-99-743-0 / 0-902-52-569-9 2 - With retract lock 0-902-52-268-9 / 0-901-85-956-4 / 0-902-18-438-0 PRODUCT LINE B - Blow Mold TYPE K - Krones Stretch Rod DESIGN NO. 5 - Metric MANDATORY OPTION DR - Cushion Control Retract Only (Must be specified) B C K 1-5 - 50 x 390 - DR - U23 SERIES C - Cylinder 150 psi [10 bar] Air BORE SIZE BORE AREA (mm) (in) (sq mm) (sq in) 50 1.969 1963 3.05 Contact PHD for smaller or larger bores. NOTE: Standard stretching cylinder ordering number is as follows: BCK1-5-50 x 390 - DR (-U19) -U23 or -U19. Options need to be specified for valve to be attached to unit. METRIC STROKE STANDARD STROKE LENGTHS BORE (mm) MAXIMUM STROKE (mm) 50 390 (164 mm = Minimum Stroke in 1 mm Increments) Contact PHD for longer strokes. CYLINDER OPTIONS K_ - Extra Rod Extension in 1 mm increments Length Code (BCKxxx) is -K5 = 5 mm, -K17 = 17 mm, etc. U19 - MAC ISO 2 Series Valve with DIN Connector on Top* U23 - MAC ISO 2 Series Valve with DIN Connector Rotated 90 R13 - Rod Eye Attached to Rod End of Cylinder L2116-16 mm incoming air line (12 mm standard) F66-6 wrench flats (2 wrench flats standard)* *Recommended Option POSITION 2 FULL EXTEND CYLINDER (TOTAL STROKE) POSITION 1 FULL RETRACT RETRACT END RETRACT END EXTEND END EXTEND END ROD EXTENSION BCK1 BCK2 4 www.phdinc.com/bck (800) 624-8511
ENGINEERING DATA: SERIES BCK STRETCHING CYLINDERS Specifications Imperial Metric TYPE Pneumatic Cylinder SERIES BCK Stretch Rod Actuator BORE SIZE 1.969 in 50 mm BORE AREA EXTEND 3.04 in 2 1963 mm 2 BORE AREA RETRACT 2.56 in 2 1649 mm 2 THEORETICAL OUTPUT @ 87 PSI [6 BAR] 264.5 lb 1176.6 N FLUID Air OPERATION Double Acting OPERATING PRESSURE RANGE 7.5-150 psi 0.5-10 bar AMBIENT AND FLUID TEMPERATURE -20 to 180 F -29 to 82 C OPERATING PISTON SPEED (TYPICAL) CUSHION, RETRACT Factory Set on Retract Cam Controlled on Machine Standard (Factory Set) LUBRICATION FDA Regulation 21 CFR 1789.3570 PORT SIZE G 1/4 STROKE 15.354 in 390 mm STROKE TOLERANCE +.079/-.000 in +2.0/-0.0 mm BUMPER Thermoplastic Polyester Elastomer HEADS & CAPS Anodized Aluminum CYLINDER TUBE Anodized Aluminum PISTON ROD Hard Chrome Plated Steel ROD BEARING Engineered Polymer PISTON & ROD SEAL MATERIAL Urethane ACTUATOR SPEEDS Factory set on retract. Cam controlled velocity on extend by machine. MAXIMUM ALLOWABLE KINETIC ENERGY Series BCK Cylinder is provided with a cushion retract. Its maximum kinetic energy rating is 60.5 in-lb [6.84 Nm]. LIFE EXPECTANCY Series BCK Cylinders have been designed for over 20 million trouble-free cycles. Valve Specifications Imperial Metric SERIES ISO 2 (ISO 5599/1) FUNCTION 5 / 2 FLUID Air OPERATOR Single PILOT Internal SPOOL RETURN Air Only SOLENOID 24 Vdc (5.4 W) VOLTAGE RANGE -15% to +10% from Nominal ELECTRICAL CONNECTOR DIN 43650, Form A MANUAL OPERATOR Non-locking Recessed PILOT EXHAUST Muffled FLOW 3.0 Cv LUBRICATION FDA Regulation 21 CFR 1789.3570 FILTRATION 40 Micron OPERATING PRESSURE RANGE 20 to 150 psi 1.37 to 10 bar AMBIENT AND FLUID TEMPERATURE 0 to 120 F -18 to +50 C LUBRICATION Series BCK Cylinders are lubricated internally at the factory for the life of the cylinder. PHD uses FDA food grade lubrication per regulation 21 CFR 1789.3570. Any other lubrication applied to the cylinder may decrease the life expectancy. MAINTENANCE As with most PHD products, these cylinders are field repairable. Repair kits, piston and rod assemblies, and main structural components are available as needed for extended service. Schematic DiagramS BCK1 BCK2 P1 7 BAR (SHOWN NOT ENERGIZED) UP VALVE HOME = UP SHIFT = DOWN UP VALVE HOME = UP SHIFT = DOWN 4 2 4 2 LOCKING CYLINDER ORIFICE 5 1 3 5 1 3 ORIFICE MANIFOLD MANIFOLD CYLINDER 2X MUFFLER P1 7 BAR DOWN 2X MUFFLER P1 7 BAR DOWN www.phdinc.com/bck (800) 624-8511 5
DIMENSIONS: SERIES BCK STRETCHING CYLINDERS BCK1 2.157 [54.8].500 [12.7] Ø.472 TUBING FITTING [12.0].916 [23.3] 1.500 [38.1] 1.500 [38.1] 2X 3.226 [82] M16 X 1.5 ROD THREAD 1.349 [34.3] 1.349 [34.3] 2.661 [67.6] 3.071 [78] 1.575 [40] 1.574 [40] 6X Ø.346 [8.8] THRU R 1.575 [40].787 [20] 8.059 [204.7] SEE NOTE 5 4.409 [112].142 [3.6] 3.675 [93.3] 5.000 [127] 4.134 [105] 1.349 [34.3] 2.687 [68.2] 1.250 [31.8] NOTES: 1) UNIT SHOWN AT 390 mm TRAVEL 2) DIMENSIONS IN [ ] INDICATE VALUES IN mm 3) MAXIMUM STROKE IS 15.354 [390] 4) MINIMUM STROKE IS 6.457 [164] 5) FOR STROKES SHORTER THAN 390 SUBTRACT.019 [.5 mm] FOR EACH 1 mm OF STROKE REDUCTION. M16 ISO 4035 (DIN 4398) NUT! TAMPER PROOF TAG WARRANTY VOID IF REMOVED 20.169 [512.3] CUSHION NEEDLE LOCATION* CAUTION: *A tamper evident tag is placed over the cushion control needle cavity. Removal of the tag and/or adjustment of the cushion needle will void the warranty of the Series BCK Cylinder. BCK2 Refer to BCK1 Cylinder above for all other dimensions not shown 19.600 [497.8] 1.746 [44.3] 1.576 [40] 2.761 [70.1] 1.677 [42.6] EXHAUST FILTER 1/8-27 NPT TAMPER PROOF TAG WARRANTY VOID IF REMOVED 21.812 [554] CUSHION NEEDLE LOCATION*.138 [3.5] NOTES: 1) UNIT SHOWN AT 390 mm TRAVEL 2) DIMENSIONS IN [ ] INDICATE VALUES IN mm 3) MAXIMUM STROKE IS 15.354 [390] 4) MINIMUM STROKE IS 6.457 [164]! CAUTION: *A tamper evident tag is placed over the cushion control needle cavity. Removal of the tag and/or adjustment of the cushion needle will void the warranty of the Series BCK Cylinder. 6 All dimensions are reference only unless specifically toleranced. www.phdinc.com/bck (800) 624-8511
OPTIONS: SERIES BCK STRETCHING CYLINDERS U19 MAC ISO 2 SERIES VALVE TOP ORIENTED DIN CONNECTION Recommended Option A MAC ISO 2 Series valve is optionally provided and assembled to the unit by specifying the -U19 option. The valve is equipped with a top oriented DIN 43650, shape A connector, and is lubricated with FDA Regulation 21 CFR 1789.3570 food grade lubrication. Refer to valve specification chart on page 5. NOTES: 1) UNIT SHOWN AT 390 mm TRAVEL 2) DIMENSIONS IN [ ] INDICATE VALUES IN mm 3) MAXIMUM STROKE IS 15.354 [390] 4) MINIMUM STROKE IS 6.457 [164] 5) FOR STROKES SHORTER THAN 390 SUBTRACT.019 [.5 mm] FOR EACH 1 mm OF STROKE REDUCTION..984 [25].984 [25] 8.248 [209.5] SEE NOTE 5 4.409 [112] DIN 43650 SHAPE A CONNECTOR 7.755 [196.97] U23 MAC ISO 2 SERIES VALVE SIDE ORIENTED DIN CONNECTION (OEM ORIENTATION) A MAC ISO 2 Series valve with side oriented DIN connection is an option and assembled to the unit by specifying the -U23 option. The valve is equipped with a DIN 43650, shape A connector, and is lubricated with FDA Regulation 21 CFR 1789.3570 food grade lubrication. Refer to valve specification chart on page 5. NOTES: 1) UNIT SHOWN AT 390 mm TRAVEL 2) DIMENSIONS IN [ ] INDICATE VALUES IN mm 3) MAXIMUM STROKE IS 15.354 [390] 4) MINIMUM STROKE IS 6.457 [164] 5) FOR STROKES SHORTER THAN 390 SUBTRACT.019 [.5 mm] FOR EACH 1 mm OF STROKE REDUCTION.! CAUTION: When attaching the -U23 Option to the cylinder manifold, the two M3 SHCS holding the pilot block to the valve body must be removed in order to properly attach the valve to the manifold. If the M6 SHCS are not properly torqued, the valve may leak and the SHCS will damage both the pilot block and the valve body. 2.949 [74.9] 4.409 [112].984 [25].984 [25] 8.248 [209.5] SEE NOTE 5 DIN 43650 SHAPE A CONNECTOR 6.513 [165.44] K_ EXTRA ROD EXTENSION Extra rod extension can be achieved by specifying the option -K followed by the length code. Rod extension is available in 1 mm increments. Contact PHD for other combinations. K_ NOTES: 1) -K_ = Extra rod extension in 1 mm increment lengths Code examples: -K5 = 5 mm extension -K15 = 15 mm extension 2) Rod extension shown at -K15 (15mm) 2.157 + K_ [54.8 + K_] 4.351 [110.5] MIN 4.607 [117.0] MAX All dimensions are reference only unless specifically toleranced. www.phdinc.com/bck (800) 624-8511 7
OPTIONS: SERIES BCK STRETCHING CYLINDERS R13 ROD EYE MOUNTING WITH SPHERICAL BEARING (DIN 8139) This option includes a rod eye attached to the rod end of the cylinder. 3.761 [95.5] MIN 4.016 [102.0] MAX 2.520 [64.01].906 [23.01] MIN 2.157 [54.8] 1.023 [25.99] MIN THREAD DP 4 JAM NUT SUPPLIED WITH CYLINDER M16 x 1.5 ROD THREAD MAX R.827 [21.0] Ø.631 [16.02] (H9) 4 L2116 16 mm INCOMING AIR FITTING This option provides connection for 16 mm incoming air lines. 3.911 [99.3].628 [16] F66 6 WRENCH FLATS Recommended Option Extra wrench flats can be achieved by specifying this option. Contact PHD for other possible rod end configurations. T 3X.625 [15.9] T SECTION T-T 8 All dimensions are reference only unless specifically toleranced. www.phdinc.com/bck (800) 624-8511
PARTS LIST & REPAIR KITS: SERIES BCK STRETCHING CYLINDERS KEY PART DESCRIPTION BCK1 & BCK2 Finished Tube Head Assembly Head Rod Bushing Rod Seal Retaining Ring Cap Assembly Cap Bushing Rod Seal O-Ring Seal Piston & Rod Assembly Piston Seal Wear Ring Multi-function Impact Seal Custom Shoulder Bolt Cushion O-Ring Seal Cap Shock Pad Jam Nut Socket Head Cap Screw Flange 1/4 BSPP Elbow Fitting Finished Urethane Tubing 3/8 NPT Elbow Fitting Metric Washer Serrated Safety Washer Socket Head Cap Screw Mounting Plate 3/8 NPT ISO 2 Manifold 3/8 NPT Muffler 3/8 NPT Straight Fitting Port Orifice Metric Washer Serrated Safety Washer Socket Head Cap Screw Fitting Adaptor 16 mm Tube Fitting Full unit description followed by -H1300 Full unit description required followed by -H1100 Sold as part of Head Assembly Sold as part of Head Assembly, Sold as part of Repair Kit (-H9010*) Sold as part of Head Assembly, Sold as part of Seal Kit (-H9000*) and Repair Kit (-H9010*) 15484-119 Full unit description required followed by -H1200 Sold as part of Cap Assembly Sold as part of Cap Assembly, Seal kit (-H9004*) & Repair Kit (H9014*) Sold as part of Cap Assembly & Seal kit (-H9004*) Sold as part of Cap Assembly & Seal kit (-H9004*) Full unit description required followed by -H1000 Sold as part of Seal Kit (-H9000*) Sold as part of Repair Kit (-H9010*) Sold as part of Seal Kit (-H9000*) and Repair Kit (-H9010*) 61933-1-01 Sold as part of Seal Kit (-H9000*) and Repair Kit (-H9010*) 84507 Full unit description required followed by -H2001 61054-141 Full unit description required followed by -H2005 74345-071 Full unit description required followed by -H4210 74345-183 59022-005-1 84141-007-02 61054-102 Full unit description required followed by -H4810 83421 83424 74345-135 85268 59022-006-1 84141-008-02 61054-124 86873 61734-138 MULTI-FUNCTION SEAL ORIFICE -L2116 OPTION 51 50 SEE NOTE 2 28 M3 SHCS CUSHION ORIFICE DETAIL K (10 ) (10 ) ALIGN CUSHION ORIFICE IN CAP WITH CUSHION ORIFICE HOLE IN MULTI-FUNCTION SEAL TO ALLOW FREE AIR FLOW 23 22 THREAD TO BOTTOM OF MANIFOLD 21 20 24 M6 SHCS 27 26 25 19 18 17 SMALL MANIFOLD BLOCK -U23 OPTION 16 7 9 10 3 3A NOTE SEAL ORIENTATION AND LOCATION RETAINING RING LOCATION 16 SEE DETAIL K SEE NOTE 1 TUBE BORE DETAIL R SEE DETAIL R 2B 2D 7 1 2 4 15 2A 14 2C 12 33 3F 8 3 13 3A 11 15 28 -U19 OPTION 8 14 5 6 5 = THREAD LOCKER = FOOD GRADE GREASE *SEE PHD FOR SPECIFIC LUBRICATION 2A 2B 2C 2D 3 3A 3D 3E 3F 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 50 51 1 2 4 5 6 7 8 9 KEY PART DESCRIPTION BCK2 Locking Cylinder Assembly Piston & Rod Assembly Piston Rod Flat Head Cap Scre Body Assembly Body Exhaust Filter Bushing Plug Shock Pad Piston Seal Stop Tube Compression Spring O-Ring Seal Rod Seal Retaining Ring Socket Head Cap Screw 85073 86849 Sold as part of Piston & Rod Assembly Sold as part of Piston & Rod Assembly Sold as part of Piston & Rod Assembly 85075 Sold as part of Body Assembly Sold as part of Body Assembly Sold as part of Seal kit (-H9004*) & Repair Kit (H9014*) 73878 53803 Sold as part of Seal kit (-H9004*) & Repair Kit (H9014*) 86846 5168-002 Sold as part of Seal kit (-H9004*) & Repair Kit (H9014*) Sold as part of Seal kit (-H9004*) & Repair Kit (H9014*) Sold as part of Repair Kit (H9014*) 61054-106 BCK1 3E 3D BCK1 & BCK2 KIT DESCRIPTION KIT NUMBER COLOR CODE 10 Seal Kit* (Main Cylinder Only) -H9000* Repair Kit* (Main Cylinder Only) -H9010* Rod Eye Mounting Kit 52493-03-1 BCK2 KIT DESCRIPTION KIT NUMBER COLOR CODE Seal Kit* (Retract Lock Cylinder Only) -H9004* Repair Kit* (Retract Lock Cylinder Only) -H9014* 4 NOTE: *Full unit description required (followed by -Hxxxx) NOTES: 1) A tamper evident tag is placed over the cushion control needle cavity. Removal of the tag and/or adjustment of the cushion needle will void the warranty of the cylinder.! 2) CAUTION: When attaching the -U23 option to the cylinder manifold (21), the two M6 SHCS that hold the pilot block to the valve body must be removed in order to properly attach the valve to the manifold. If the M6 SHCS are not properly torqued, the valve may leak and the SHCS will damage both the pilot block and the valve body. 6 5 BCK2 41 40 8 40L 40D 40J 40H 40G 40B 40BA 40B 40F 40AC 40AA 40A 40AB 40E 5 40J 40K 40C 40L 40 40A 40AA 40AB 40AC 40B 40BA 40BB 40C 40D 40E 40F 40G 40H 40J 40K 40L 41 KEY OPTION PART NUMBER 28 -U19 (ISO 2 Valve, Connector out Top) 78212 28 -U23 (ISO 2 Valve, Connector out Side) 83392 33 -R13 (See Rodeye Kit Number) 50 Fitting Adaptor 86873 51 16 mm Tube Fitting 61734-138 www.phdinc.com/bck (800) 624-8511 9
High Pressure Nozzle Bell Seal ML310864 Krones Direct Replacement MAJOR BENEFITS FDA material Longer life than OEM solution.262 [6.7].130 [3.3] Ø 1.690 [42.9].303 [7.7] T.161 [4.1] Ø 1.439 [36.6] Ø 1.267 [32.2] Ø 1.221 [31].081 [2.1].155 [3.9].032 [0.8] Ø 1.063 [27] Transfer Arm Head ML311628 Krones Direct Replacement MAJOR BENEFITS Hardened tool steel body Lubrication ports provided Longer life than OEM solution.276 [7] 2.164 [55] 1.772 [45] 2X Ø.252 [6.4] C BORE Ø.427 [10.8] DP.261 [6.6] 2X Ø.118 [3] DP.087 [2.2].904 [23] 2X R.630 [16] LUBE FITTING - BOTH SIDES REQUIRES ALEMITE TIP # Z 737 2X Ø.030 [0.8] LUBE VENT.315 [8].904 [23] 1.555 [39.5].432 [11].864 [22].142 [3.6] BODY 2X SHAFT.432 [11].394 [10].370 [9.4].393 [10] 8X R.313 [7.9] Ø.177 [4.5] THRU C BORE Ø.237 [6] H7 DP.756 [19.2].354 [9].472 [12] 2X Ø.550 [14] Ø.197 [4.99] THRU 10 All dimensions are reference only unless specifically toleranced. www.phdinc.com (800) 624-8511
Eject Cylinder ML309880 (25x8.5) ML310656 (25x25) MAJOR BENEFITS Krones Direct Replacement Provides rapid repeatable ejection function due to MAC valve design and PHD cylinder. High kinetic energy capacity Provides faster delivery times than OEM product In many cases lower cost solution than OEM product Intended for high speed part rejection VALVE INTERFACE AREA DETAIL CYL B PORT (RETRACT).543 [13.8] EXHAUST B PORT INLET PORT 1.250 [31.8].315 [8].455 [11.6] 2X M2.5 x 0.45 x.200 CYL A PORT (EXTEND) 1.013 [25.7].228 [5.8].158 [4] 2.000 [50.8] EXHAUST A PORT (ST M10 x 1.25 1.179 [29.9] 1.564 [39.7].825 [21].272 [6.9].394 [10] PISTON ROD.827 [21] 1.065 [27.1] 2.102 [53.4] 5.197 [132] RETRACTED 5.532 [140.5] EXTENDED (309880) 6.182 [157] EXTENDED (310656).135 [3.4] MAC VALVE PER 46A-N00-JXX0-1KJ (VALVE SHOWN FOR REFERENCE ONLY -TO BE SUPPLIED AND INSTALLED BY DISTRIBUTOR) VALVE INTERFACE AREA 1.000 [25.4].847 [21.5] BUSHING CARTRIDGE (STAINLESS STEEL).700 [17.8] 1/8-28 BSPP SUPPLY PORT.925 [23.5] 1.017 [25.8] 2X.4736.0005 [12.029.013] BRONZE BUSHING (1X THIS SIDE AND 1X OPPOSITE SIDE) BODY (ALUMINUM) 1/8-28 BSPP EXHAUST PORT NOTE: UNIT TO ACCEPT SERIES 46 BASE MOUNT MAC VALVE PER MAC PART# 46A-N00-JXX0-1KJ. All dimensions are reference only unless specifically toleranced. www.phdinc.com (800) 624-8511 11
Rebuild Program Return your old units for rebuilding Before: After: This stretching cylinder was rebuilt and returned to service. Get a 12 Month Like New Warranty Plastic Packaging Components such as Stretching Cylinders, Transfer Arms, Blow Nozzles, Filler Cylinders, Slip Sheet Grippers, and Eject Slides are rebuildable. PHD s Rebuild Program refurbishes your existing PHD products with all new wear items. Rebuilt units offer the same PHD quality that you re used to, but for a fraction of the cost of a new unit, reducing your total cost of ownership. Rebuilt units are placed back into service, thus reducing your total cost and saving valuable components from scrap. All PHD factory rebuilt units receive a 12 month like new warranty. UNIQUE SOLUTIONS SPECIAL REQUIREMENTS PHD Unlimited Unique Solutions designs and manufactures units to meet the special requirements of our customers. We welcome and encourage requests for specialized products, regardless of quantity or frequency of order. Our solutions range from one-time-only units to high quantity requirements. With over 30,000 designs and over 100,000 quotes already in our database, we can provide most quotes within eight working hours. When it comes to delivery, PHD is the best. Give us a call or go online and see how we can become your engineering partner. www.phdinc.com/unlimited/quote To request a free brochure, visit www.phdinc.com/resources/inforequest/ Capabilities Most quotes delivered within eight working hours Dedicated application assistance 24 hours a day, 7 days a week service Fast delivery and competitive pricing Separate unique solutions engineering and manufacturing areas dedicated to our customers, ensuring prompt quotes and dependable delivery Over 30,000 unique solutions provided and over 100,000 quotes in our database 12 www.phdinc.com (800) 624-8511 2.5M 4/16 10054