Hydraulic bottle jacks

Vehicle jacks

Hydraulic bottle jacks HSWH Series Hydraulic bottle jacks with 3 t or 5 t load-bearing capacity XXJack with grooved lifting pad and screw extension XXExtremely durable cylinder XXVery low insertion height in lowest position XXExtremely stable and tilt-safe thanks to large special cast base plate for added stability XXEasy-action, two-part pump rocker arm with fit for valve control XXParticularly robust, stable and durable thanks to reinforced walls HSWH 3 HSWH 3 6201000 E B HSWH 5 6201001 C F Min. height (A) Adjustment height (B) Stroke (C) Lift height (D) Footprint (E x F) Dimensions (L x W x H) 3t 194 mm 60 mm 118 mm 372 mm 92 x 100 mm 92 x 100 x 194 mm 3.6 kg 5t 216 mm 70 mm 127 mm 413 mm 96 x 112 mm 96 x 112 x 216 mm 4.5 kg HSWH 5 D A HSWH-Pro series Hydraulic bottle jacks for professional deployment XXSafety valve protects the cylinder against overload XXInner safety valve prevents inadvertent adjustment XXHard chrome-plated piston and adjusting screw with smooth surface for long service life XXLong galvanized lever for easy pumping XXPremium welds and extremely durable threaded joint for maximum leak-tightness XXReinforced at points exposed to heavy loads XXStop protection prevents over-extension and blocking of the jack XXPump is doubly sealed to improve leak-tightness XXThe extremely robust welded chassis is suitable for toughest permanent operation XXRounded base ensures central load distribution E F HSWH-PRO 5 HSWH-PRO 5 6201015 HSWH-PRO 10 6201016 G HSWH-PRO 20 HSWH-PRO 20 6201017 HSWH-PRO 30 6201018 B C Min. height (A) Adjustment height (B) Stroke (C) Lift height (D) Footprint (E x F) Die Ø (G) Dimensions (L x W x H) 22 5t 212 mm 110 mm 146 mm 468 mm 110 mm x 112 mm 40 mm 110 x 112 x 212 mm 4.9 kg 10 t 220 mm 115 mm 148 mm 483 mm 124 mm x 127.5 mm 48 mm 124 x 127.5 x 220 mm 7.4 kg 20 t 241 mm 115 mm 165 mm 521 mm 165 mm x 161 mm 60 mm 165 x 161 x 241 mm 13.1 kg 30 t 244 mm 108 mm 140 mm 492 mm 186 mm x 174 mm 65 mm 186 x 174 x 244 mm 15.8 kg D A E

XXStop protection prevents blocking of the jack XXSafety valves prevent overload of the cylinder and accidental adjustment Vehicle jacks 2x extensible telescopic pump handle As of HSWH 20 TOP: Rotating carrying handle HSWH 10 TOP HSWH 15 TOP Assembly aid HSWH 5 TOP Lifting platforms & pallet trucks XXExtensible lifting column, tiltproof baseplate XXRotating pump toggle lever can be operated from any position XXParticularly durable thanks to reinforced walls XXPremium welds and threaded joint XXHard-chromated pistons and adjusting screws XXExtension screw provides extra height reach Transportation aids Quality Made in Europe HSWH TOP series Hydraulic bottle jack Rotating pump toggle lever can be operated from any position C B E Power generators Lifting gear/weighing device The lifts can also be used horizontally F A D Scope of supply: >> Pump lever >> Carrying handle (as of HSWH 20 TOP) HSWH 5 TOP 6211005 HSWH 10 TOP 6211010 HSWH 15 TOP 6211015 HSWH 20 TOP 6211020 HSWH 30 TOP 6211030 Min. height (A) Lift height (D) Stroke (B) Adjustment height (C) Footprint (E x F) 5t 212 mm 437 mm 125 x 4.5 kg 10 t 219 mm 444 mm 144 x 90 mm 6.4 kg 15 t 228 mm 453 mm 164 x 110 mm 8.8 kg 20 t 234 mm 459 mm 172 x 120 mm 10.6 kg 30 t 242 mm 467 mm 196 x 144 mm 15.5 kg 23 Battery chargers HSWH 30 TOP Workshop equipment HSWH 20 TOP

Car manoeuvring aids and drive-on ramps PRW 450 Car dollies XXMove vehicles with ease, including damaged, locked, or blocked vehicles XXFor sideways movement or rotating on the spot XXWith steeling rollers for optimum manoeuvring in cramped spaces, e.g., car dealerships or workshops PRW 450 6201599 900 kg/pair Individual dimensions (L x W x H) 602 x 385 x 140 mm 9 kg/pc. scope of delivery 2 roller dolleys PV 681 Hydraulic manoeuvring aid for cars XXFor manoeuvring cars in cramped conditions XXTwo manoeuvring aids for rotating a car about its own axis; for manoeuvring aids for full freedom of movement XXConvenient lifting of the vehicle using a foot pedal XXFor use on flat floors indoors XXWith steering rollers for best manoeuvring ability even in cramped rooms XXRugged steel design, wheel holders made of aluminium PV 681 6201602 Wheel holding rail (L x Ø) Distance to rail centre Distance to inside of rail Ground clearance Ground clearance rail top/bottom scope of delivery Application example 680 kg 270 x 70 mm 340-620 mm 270-550 mm 36 / 106 mm 18 kg 1 manoeuvring aid KR series Practical drive-on vehicle ramps for more safety when working and under the vehicle easy to operate KR 2000 XXStable design XXRobust welded steel design XXRamp width up to 185 mm KR 2001 XXStable design XXRobust welded steel design XXRamp width up to 225 mm KR 2000/ KR 2001 Max. tyre width Dimensions scope of delivery 24 KR 2500 XXSpace-saving, stackable XXPlastic vehicle ramp XXFeaturing extra-wide ramp width (240 mm) KR 2500 KR 2000 6202000 KR 2001 6202001 KR 2500 6202005 2 t/pair 185 mm 830 x 310 x 270 mm 5.2 kg/pc. 2 pcs. 2 t/pair 225 mm 910 x 360 x 270 mm 7.9 kg/pc. 2 pcs. 2.5 t/pair 240 mm 900 x 295 x 220 mm 4 kg/pc. 2 pcs.

Lifting platforms & pallet trucks Hydraulic trolley jack/support stands RWH Series Floor jacks RWH 2.5 RWH 2.5 XXWith cast iron load-bearing and steering rollers XXWith upper part for extending the pad XXWith second attachment point for lever: single stroke on the vehicle's jacking point thanks to QUICK LIFT function XXEasy lifting after moving the lever Transportation aids RWH 2 XXWith cast iron load-bearing and steering rollers XXShort type XXCompact and stable XXPractical carrying handle Vehicle jacks XXWith practical holder for upper part at side XXExtensible pad facilitates work on the vehicle 2.5 t 530 mm 680 mm 290 mm 185 mm 18 kg RWH 2.5 UB Series Trestles UBK Series - Folding trestles XXSafeguard for working under the raised vehicle XXRobust welded design with V piston XXWide feet: easy on the workshop floor, asphalt or other substrates XXUB 3000 adjustable in ten stages XXUB 6000 adjustable in 13 stages XXSafeguard for working under the raised vehicle XXWide feet: easy on the substrate Scope of supply: >> 2 support stands Min. height Max. height Latching stages Footprint Lifting gear/weighing device 130 mm 345 mm 480 mm 220 mm 9.6 kg Power generators RWH 2.5 6201101 Battery chargers Min. clearance Final height max. Length Width Height RWH 2 6201100 QUICK L IF Functio T n Scope of supply: >> 2 support stands UB 3000 6201300 UB 6000 6201301 3 t/trestle 288 mm 425 mm 10 225 x 205 mm 7 kg/pair 6 t/trestle 395 mm 605 mm 13 310 x 265 mm 13.2 kg/pair Min. height Max. height Latching stages Footprint UBK 3000 6201305 UBK 6000 6201306 3 t/trestle 285 mm 400 mm 4 240 x 240 mm 4 kg/pair 6 t/trestle 376 mm 576 mm 4 370 x 370 mm 4.3 kg/pair 25 Workshop equipment Assembly aid RWH 2

Special floor jacks SRWH 2500 EF SRWH Series Special floor jacks SRWH 2500 EF, SRWH 3001 EF, SRWH 3000 QL XXTwo-part pump lever with rubber handle for safe and easy lifting of loads XXValve control via rotating pump lever XXWith cast iron load-bearing and steering rollers XXExtra-wide support pad surface XXFlat design: Floor jack specially designed for suspension lowered and sports vehicles with a minimum ground clearance of just 85 mm SRWH 3000 QL SRWH 2500 EF QUICK LIFT function XXWith a single push of the pedal at the vehicle's jacking point With dual piston XXLess pumping actions needed to max. height SRWH 3001 EF Fast foot lift QUICK LIFT Functio n Turn to lo wer SRWH 3000 QL Max. lifting height (B) Min. clearance (A) Underside clearance max. (C) Final height max. (D) Dimensions (E x G x B) Inside width (H) Outside width (G) Max. length (F) 26 Extra flat! SRWH 2500 EF 6201102 Extra flat! SRWH 3001 EF 6201117 SRWH 3000 QL 6201103 2.5 t 370 mm 85 mm 174 mm 455 mm 640 x 342 x 174 mm 266 mm 342 mm 1,600 mm 34.8 kg 3.0 t 430 mm 90 mm 520 mm 720 x 380 x 290 mm 380 mm 1,955 mm 43 kg 3.0 t 355 mm 145 mm 180 mm 500 mm 685 x 346 x 180 mm 270 mm 346 mm 1,640 mm 38 kg

Lifting platforms & pallet trucks SRWH LF series Transportation aids XXSlow, safe lowering under load XXLarge support pad with rubber mat protects the jacking point and vehicle XXPractical integrated tool tray with rubber mat XXWith cast iron load-bearing and steering rollers Integrated helper: XXPractical tool tray SRWH LF series Long design XXVery useful with long frames Assembly aid Vehicle jacks SRWH 2001 F, SRWH 2000 LF, SRWH 3001 LF XXWith extra-low pad profile for suspensionlowered vehicles XXLF models particularly well-suited for long frame parts due to extra-long design XXEasy lifting up to jacking point via foot pedal or hand lever Lifting gear/weighing device SRWH 2001 F Power generators SRWH 2001 LF H G D B C A Max. lifting height (B) Min. clearance (A) Underside clearance max. (C) Final height max. (D) Dimensions (E x G x B) Inside width (H) Outside width (G) Max. length (F) F SRWH 2001 F 6201118 SRWH 2001 LF 6201119 SRWH 3001 LF 6201120 390 mm 133 mm 465 mm 910 x 370 x 390 mm 258 mm 370 mm 1,811 mm 34.5 kg 445 mm 133 mm 520 mm 950 x 375 x 445 mm 263 mm 3 1,852 mm 38,5 kg 3.0 t 470 mm 100 mm 185 mm 570 mm 1,070 x 375 x 470 mm 2 3 1,980 mm 50,3 kg Battery chargers E 27 Workshop equipment SRWH 3001 LF

Floor jacks RWHA Series Aluminium floor jacks Light models for flat, sports vehicles XXVery flat, designed specifically with vehicles with lowered suspension XXValve control via interior rods and rotary button on pump lever XXSlow, safe lowering under load XXConvenient and easy lifting thanks to hydraulics and long lever XXTwo practical aluminium handles at sides RWHA 1500 XXLightweight, robust aluminium design XXWith stable load roller XXRubber mat protects pad and vehicle RWHA 2500 XXRobust aluminium and steel construction XXQUICK LIFT function: reaches max. height with just 7 pump strokes RWHA 1500 With double-action pump XXFor lowered chassis RWHA 1500 XXRubber mat on pad and pump lever sleeve protect the vehicle chassis RWHA 1505 RWHA 2500 Min. clearance Final height max. Length Width height 28 RWHA 1500 6201106 RWHA 1505 6201110 RWHA 2500 6201109 1.5 t 85 mm 445 mm 660 mm 294 mm 170 mm 19.5 kg 1.5 t 85 mm 3 576 mm 250 mm 154 mm 18.5 kg 2.5 t 100 mm 465 mm 650 mm 292 mm 170 mm 26.4 kg Long lever with premium handle for lowering

SRWH 3001 SIL Special floor jacks Lifting platforms & pallet trucks New Transportation aids XXWith extra-low pad profile for suspension-lowered vehicles XXLF models particularly well-suited for long frame parts due to extra-long design XXEasy lifting up to jacking point via foot pedal or hand lever XXSlow, safe lowering under load XXLarge support pad with rubber mat protects the jacking point and vehicle XXParticularly quiet thanks to polyurethane rollers 3.0 t 340 mm 120 mm 158 mm 460 mm 628 x 343 x 158 mm 343 mm 1,756 mm 31.5 kg D B Assembly aid Max. lifting height (B) Min. clearance (A) Underside clearance max. (C) Final height max. (D) Dimensions (E x G x B) Outside width (G) Max. length (F) SRWH 3001 SIL 6201121 C A G E F Ground clearance Lift height Dimensions (L x W x H) Power generators Turn to lower Battery chargers XXRobust frame design XXCompact and space-saving XXLarge rubber support pad for best possible safety when lifting loads XXRapid centring of the load thanks to the lifting pad shape XXLoad-bearing and steering rollers made of plastic for low-noise positioning XXSafety valve triggers lifting bar idle position in case of overload - lifting height is kept XXTwo-part pump lever with rubber handle for safe and easy lifting of loads XXValve control via rotating pump lever Lifting gear/weighing device SRWH-PRO series Special floor jacks for professional deployment SRWH-PRO 2000 6201115 SRWH-PRO 2000 130 mm 405 mm 760 x 480 x 200 mm 33.5 kg SRWH-PRO 2000 29 Workshop equipment Vehicle jacks XXEquipped with low-noise polyurethane rollers

Special floor jacks New SRWH 22 TOP Portable hydraulic trolley jack for professional applications XXExtra-low pad profile for suspension-lowered and low-riding sports vehicles XXEasy lifting up to jacking point via foot pedal or hand lever XXSafety valve triggers shifts lifting bar to idle position in case of overload XXProtects the jacking point and vehicle thanks to large support plates with rubber mats XXMechanical protection system prevents accidental lowering XXSlow and safe lowering under load XXValve control via rotating pump lever Quality Made in Europe XXFast lifting with dual-action pump XXLoad-bearing and steering rollers made of plastic for low-noise positioning XXPractical integrated tool tray Can be transported upright. Patented! Height-adjustable telescopic handle includes all functions: lifting, lowering and transport. Patented! SRHW 22 TOP Min. clearance Final height max. Dimensions (L x W x H) 30 SRWH 22 TOP 6213022 92 mm 410 mm 616 x 200 x 136 mm 19 kg

XXEasy lifting up to jacking point via foot pedal or hand lever XXLoad-bearing and steering rollers made of plastic for low-noise positioning XXSafety valve triggers lifting bar idle position in case of overload - lifting height is kept XXSlow and safe lowering under load XXPractical integrated tool tray XXValve control via rotating pump lever Vehicle jacks Transportation aids XXRugged, compact and space-saving design XXWith low pad profile for suspension-lowered vehicles XXLarge support pad with rubber mat protects the jacking point and vehicle XXRapid centring of the load thanks to the lifting pad shape Quality Made in Europe Lifting platforms & pallet trucks SRWH TOP series Special floor jack for professional applications Mechanical protection system prevents accidental lowering 2 1 Patented foot pedal triggers the mechanical protection system meaning that the lifts do not need support stands (PATENTED!) 2 Easy lifting up to jacking point via foot pedal SRHW 20 TOP Min. clearance Final height max. Dimensions (L x W x H) SRHW 20 TOP 6213020 SRHW 21 TOP 6213021 SRHW 30 TOP 6213030 90 mm 470 mm 905 x 270 x 135 mm 32.5 kg 95 mm 470 mm 905 x 270 x 135 mm 32.5 kg 3t 90 mm 470 mm 905 x 270 x 135 mm 36 kg 31 Workshop equipment Battery chargers SRHW 21 TOP Power generators SRHW 30 TOP Lifting gear/weighing device Assembly aid 1

Special floor jacks Series WWH Special floor jacks Pneumatic-hydraulic workshop jacks XXControlled, safe lifting and lowering XXFor operation with compressed air from an external source XXHard chrome-plated piston with extra-smooth surface XXCompact design XXWith stable rollers made of PU coated cast iron XX T-handle for ease of manoeuvring XX With practical carrying handle on housing XX The two cast iron top sections can be used individually or connected one on top of the other to extend the lift reach. XXIntuitive safety rotary button control with compressor coupling For matching compressors see the main Aircraft catalogue, or visit www.aircraft-kompressoren.com! 3-stage design WWH 60000 PH Scope of supply: Cast iron top section 45 mm Cast iron top section WWH 60000 PH 6201112 +45 80 13 +75 Final height(s) Explanations of final height(s) Height of top section(s) Min. clearance Operating pressure Dimensions (L x W x H) 32 20 / 40 / 60 t 312 / 256 / 207 mm Without top sections 45 / 8-12 bar 875 x 295 x 1530 mm 64 kg 20 t 40 t 60 t 215 295 +56 +49 +57 150 0 875 WWH 60000 PH Dimensions and load-bearing capacity