STRAINER VALVES VARIMEX VALVES CO.LTD

Similar documents
02. ANGLE PATTERN STOP-CHECK VALVES PN 6, 16, 25 DN , SCREW DOWN, TYPE 31, 32, 33, 41, 42, 43, 53, 63

ITEM DESCRIPTION FIGURE STOP VALVES

High pressure strainer D71.2

ARI-STEVI 440 / 441 DVGW type approval

ARI-Strainer PN63-160

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN

Forged steel Stainless steel Fig. 60A Page 2. Forged steel Stainless steel Fig. 61A Page 4. Forged steel Stainless steel Fig.

STEVI 450 / way control valve in mixing and diverting design DN

High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C

Grey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4

RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.

CONA -control Monitoring system for steam traps

Gate valve S38 PN , DN , T max : 540 C

CONA Further components / Accessories

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends

SEMPELL. All applications of stop valves up to a Nominal Diameter of 50 mm. VA 500 Serie high-pressure Stop Valves DIN

Cast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5

ARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges

RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets

ARI-FABA -Plus Stop valve with bellows seal

Excess pressure regulator Excess pressure regulator, straight through DN

ARI-STOBU PN16-40 Stuffing box valve

Sempell High Pressure Stop Valves Model VA510 (DIN)

Cast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction

Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel.

Cast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3

ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat

Grey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6

CONTROL VALVE TYPE BR33

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN

ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing

ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing

TRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8

Forged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4

Pneumatic process valve, Y-pattern with pneumatic actuator of stainless steel DN 15-50

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE

ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators

Sempell High Pressure Stop Valves Model VA500 (ASME)

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges

Pressure reducing valve Pressure reducing valve in straightway form DN

SEMPELL HIGH PRESSURE CHECK VALVE MODEL VR500 (ASME)

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426

SAFETY QUICK SHUT-OFF VALVES FOR OIL. Safety devices with automatic shut-off function ASV DN 15, 20, 25 KVAZ DN 32, 40, 50

Gate valve S38 PN , DN , T max : 540 C

BALL VALVE of carbon steel with welded ends / threaded ends / flanges series

BALL VALVE of carbon steel with welded ends / threaded ends / flanges series

STAAL 40 AKK/AKKS. Type Series Booklet

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn

Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries:

Fig. VC900PS Design: ASME B16.34

FULL BORE BALL VALVE of carbon steel with welded ends / flanges and series

Forged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6

Cast iron Nodular iron BR 006/306 Page 2. Cast steel BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3

SERIES VARISTEP CONTROL VALVES

Temperature regulator Temperature regulator DN

Fire Safe Design. Anti-static Device. Anti-Blowout Design. Our firm reserves the right to make any technical changes without any notice to the client.

EXTRACTION CHECK VALVES

Weld-Ring Gaskets. Weld-Ring Gaskets. Absolutely leak proof gasketing. Characteristics and Advantages Page 1. Hollow Lip Weld-Ring Gaskets Page 2

arflu globe valves The quality you can trust Globe valves Because of their configuration,

Instrumentation Products F Series Manifolds and Multi-Way Cocks

SELF-ACTUATING DIFFERENTIAL PRESSURE AND FLOW REGULATORS TYPE ZSN91; 92

GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE

EXTRACTION CHECK VALVES TYPE C09.6

Casing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS

STAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data

VALVES 5

Materials : Carbon steel or stainless steel

AWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63

Bolted bonnet configuration

Data Sheet T EN

ARI-STEVI 470 / ANSI (DN25-200)

Si 2323 / Si 2324 / Si 2325

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Remarks. Materials

Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250

Grey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2

PRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index

UREA SERVICE FORGED VALVES

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7

ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal

ARI-STEVI 470 / 471 (DN15-150)

Valves. Ordering Information. Valves. Connection Size (Continued) Materials

Series 2000 Top Guided Control Valve

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50

GATE VALVES S 38 APPLICATION

ECOLINE GTC Type Series Booklet

w w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:

Si Engineering GREAT Solutions. Steam Safety Valves to PED and DIN/EN standards

VALVES FOR NUCLEAR POWER

Grey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8

Strainer PN 25/40 DN

Transcription:

STRAINER VALVES Features: Aplications VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl

STRAINER VALVES Features: Aplications VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl

STRAINER WITH FLANGES IN STRAIGHT FORM "T" TYPE Cat. no. 831 ND 15 300 / NP 4,0 MPA / TMAX= 450ºC* Materials Description Material standard stainless steel Body GP240GH GX5CrNiMo19-11-2 Bonnet - ND 32-50 - ND 65-300 P250GH GP240GH X6CrNiTi18-10 GX5CrNiMo19-11-2 Screen 18-8 Cr-Ni 18-8 Cr-Ni Packing Graphite Graphite Dimensions and weights ND DZ D p D 0 d O x n L f g H H 1 Weight mm kg 15 20 Interchangeably the valves according to leaflet nr 053 (strainer T type Cat. no 822) 25 32 140 78 100 18 x 4 180 2 18 105 195 8,3 40 150 88 110 18 x 4 200 2 18 112 215 9,9 50 165 102 125 18 x 4 230 2 20 122 220 11,7 65 185 122 145 18 x 8 290 2 22 150 265 22,5 80 200 138 160 18 x 8 310 2 24 170 280 27,5 100 235 162 190 22 x 8 350 2 24 195 325 39,0 125 270 188 220 26 x 8 400 2 26 198 360 49,0 150 300 218 250 26 x 8 480 2 28 220 390 70,5 200 375 280 320 30 x 12 600 2 34 268 490 140,0 250 450 345 385 33 x 12 730 2 38 360 620 265,0 300 515 410 450 33 x 16 850 2 42 420 700 350,0 VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl

STRAINER WITH BUTT-WELDING ENDS IN STRAIGHT FORM T TYPE Cat. no. 822S ND 15 25 / NP 4,0 MPA / TMAX= 450ºC* * for stainless steel performance (A) Tmax for material; 1.4571 from -196ºC up to +300º C Materials Description standard Material stainless steell Body P250GH X6CrNiMoTi17-12-2 Bonnet P250GH X6CrNiTi18-10 Screen Packing 18-8 Cr-Ni Graphite 18-8 Cr-Ni Graphite Dimensions and weights ND D1 D2 L H H 1 Weight mm kg 15 17 24 130 56 145 1,2 20 22 31 130 56 150 2,0 25 28 37 130 80 155 2,7 VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl

Strainer with flanges in straight form T type Cat. no. 922 ND 32-150 / NP 10,0 MPA / TMAX=450ºC Materials Description Material Body Bonnet Screen Packing GP240GH GP240GH 18-8 Cr-Ni Graphite Dimensions and weights ND Dz Do Dp d O x n L f g H H1 Weight mm kg 32 155 110 78 22x4 260 2 24 100 180 12 40 170 125 88 22x4 260 2 28 120 210 16 50 195 142 102 26x4 300 2 30 125 215 20 65 220 170 122 26x8 340 2 34 160 240 35 80 230 180 138 26x8 380 2 36 175 330 41 100 265 210 162 30x8 430 2 36 200 370 52 150 355 290 218 33x8 550 2 44 300 680 140 VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl

STRAINER IN OBLIQUE FORM Y TYPE WITH WELDING ENDS Cat. no. 841S ND 6-25 / NP 32,0 MPA / TMAX=450ºC Materials Description Material Body Bonnet Screen Packing 1.7335-15HM 1.7335-15HM 18-8 Cr-Ni Copper Dimensions and weights VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl