PRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
|
|
- Mervyn Fox
- 5 years ago
- Views:
Transcription
1
2 General Index Range and Index...1 Figure Numbering...2 Materials Pressure Testing...5 Installation, Marking and Identification Desgin Features Stress Analysis to the body...10 Components Parts Data Sheet For Mounted Flanges & Stem Turque...23 Gear Box Information Pressure-Temperature Rate Steel Pipe Flanges Butt Welding Ends...33 Contact us...34
3 Range and Index Regular Pattern Short Pattern Venturi Pattern Full Port pattern as per API 6D is available. Valves not shown in the table will be considered against specific requirements Class NPS 3000 Inch mm S R S R V R V R R V R V V 1/2 15 3/ / VETZ Lubricated Type Plug Valves are available in Regular, Short, Venturi Pattern or Full port. These terms are defined in BS 5353, API 6D and APl 599. The different patterns vary as regards end to end dimension and port area for a given size of valve. Regular Pattern valves have the largest port area. Short Pattern valves have a reduced port area as a consequence of their compact face to face dimensions which are identical to those for wedge gate valves. Venturi Pattern valves have a reduced port area and a flow path approximating a venturi shape to aid pressure recovery face to face and end to end dimensions conform to ANSI B16.10 and BS WENZHOU VETZ VALVE CO., LTD 1
4 Figure Numbering A familiarity with our figure number system is not necessary when specifying or ordering our valves. Providing a full description of the valve is given. Our sales office will translate this into a figure number. A full description of the valve would begin with VETZ Lubricated Type Plug Valve Pressure Balanced Valve and would then go on to give size, pressure rating, flanging details etc. We give an example below in order to illustrate a typical figure number. but if a fuller explanation is required please feel free to contact us by qa-dept@ways-valves.com. WENZHOU VETZ VALVE CO., LTD 2
5 Materials Body / Cover / Plug Materials ASTM Code Material Service Conditions A216 WCB Carbon Steel For service up to 538 where corrosion and oxidation are not a factor. (1) (4) (5) A217 WC6 1 1/4 CR, 1/2 Mo For service up to 538. (3) (4) (5) A217 WC9 A217 C5 A217 C12 A352 LCC A351 CF8(3) A351 CF8M A351 CF3M A351 CA15 2 1/4 CR, 1 Mo 5% CR, 1/2 Mo 9% CR, 1 Mo Low Carbon Steel 18Cr-8Ni 18Cr-10Ni-2Mo 18Cr-10Ni-2Mo 13Cr For service up to 1100 F where good creep strength is required. (3) (4) (5) For service up to 592. Best corrosion and oxidation resistance plus high creep strength are required. For service up to 592. Best corrosion and oxidation resistance than other grades. For service from 46 to 340. This material must be quenched and tempered to obtain tensile and impact properties needed at subzero temperatures. Good creep strength, corrosion and oxidation resistance when exposed to temperatures above 427. Good creep strength, corrosion and oxidation resistance when exposed to temperatures above 427 and it is resistant to formulation of sigma phase Good creep strength, corrosion and oxidation resistance when exposed to temperatures above 427 and it is resistant to formulation of sigma phase A487 Gr. 4 For service requiring good corrosion resistance and high tensile and 0.5Cr-0.5Ni-0.25 impact properties as well as good pitting resistance. Excellent Mo weldability and castability. Good for sour gas service 1) Upon prolonged exposure to temperatures above 427, the carbide phase of carbon steel may be converted to graphite. Permissible, not recommended for prolonged usage above ) Valve regularly rated to 538 3) Considerations should be given to the possibility of excessive oxidation (scaling) when used above ) Product used within the jurisdiction of Section 1 Power Boilers of the ASME Boiler and Pressure Vessel code is subject to the same temperature limitations as specified in that document. 5) Product used within the jurisdiction of Power Piping, ASME Code for Pressure Piping B31.1, is subject to the same maximum temperature limitations placed upon the material 6) Other materials on your request. Bolting Materials Normal NACE requirements low temperature Corrosion-resistance Others Stud Al93 Gr. B7 Al 93 Gr. B7M A320 Gr.L7 A193 Gr.B8(M) Monel Nut Al94 G r. 2 H Al94 G r. 2 H M A1 94 Gr.L4 Al94 G r. 8 (M Monel Other materials on your request. WENZHOU VETZ VALVE CO., LTD 3
6 Stem Materials ASTM Code Material Service Conditions A / 410 A105 ENP 13Cr For service up to 425 where corrosion and oxidation are not a factor. Very high tensile material. Very good when differential hardness is A PH required due to its resistance to galling. Higher corrosion resistance than high straight chrome alloy steels Other materials on your request. Lubricant Type Ingredient service Conditions Equal Specification 7903 oil-proof sealing grease 7602 high temp. grease stick 7603 stem grease stick Inorganic chemical stiffened oil with anti-oxygenizing and corrosion proof agents, light yellow gluey material Inorganic chemical stiffened oil with solid reinforcements, white or light yellow stick Poly chemical stiffened oil with solid reinforcements, black elastic stick Fuel, lubricant, water and ~150 Vapor, Acid, NH4 etc. Used at 10.29MPa or 530 Oil, Water and or above Aviation S7108T; NOSOL UTA G22/G42; CROSBY C6; Climax750; Masonlilan5 WENZHOU VETZ VALVE CO., LTD 4
7 Pressures Testing Test Pressures VALVE RATING Maximum C.W.P. BODY TEST(minimum) SEAT TEST(minimum) bar bar bar CLASS 150 PN CLASS 300 PN CLASS 600 PN CLASS CLASS 900 PN CLASS 1500 PN CLASS 2500 PN API API API pressures are taken from API 6A, all other pressures are taken from ANSI B16.34.The test pressures from ANSI B16.34 are those relevant to Carbon Steel ASTM A216 Gr. WCB. There may not be exact equivalence between pressure in bar and in PSIG due to rounding(1 bar=105 Pa) Each relevant standard defines the minimum length of time for which each test pressure is to be maintained and also the testing operations sequence. Duration of hydrostatic tests in minutes (minimum) 1 NPS DN (IN) (mm) Shell Test Backseat Test High Closure Test API 4 API ISO 2 API 4 API ISO 23 API 4 API ISO /2~4 15~ /2~6 65~ /2~8 65~ ~10 150~ ~12 200~ ~18 250~ ~18 300~ Remark: 1 The test duration is calculated after the testing pressure in the valve has been increased to the value stipulated on the standard. These durations will be adhered to unless a different specification is required against a particular order. Hydrostatic tests of long duration require that the valve be given special attention to facilitate pipeline testing.the same duration for BS6755, GB/T13927 & ISO ISO5208 has no this requirement which is cited from BS The same duration for JB/T9092, API600 & API API 6D also requires a 5.5 bar(80 PSIG)air test on the seat for the same duration. WENZHOU VETZ VALVE CO., LTD 5
8 Installation, Marking, and Identification Marking and identification of VETZ steel valves conforms to ASME B16.34 and MSS-SP-25. It is important to properly identify valves in service to allow for the ordering of replacement parts or address questions or concerns relating to our products. Body markings and information shown on the identification plate helps to properly identify valves, allowing timely and accurate responses to such inquiries. Integrally cast body marking data includes the following information and helps to provide traceability: WAYS logo Pressure class Valve size The grade of material (i.e. WCB for carbon steel) Heat number on body and bonnet (cast or stamped) Series Number (Stamped on the edge of end flange) The body markings are supplemented by a nameplate which, depending on valve type and size, is mounted in the most practicable position. Nameplates bear the following information: Fig Number Valve size Body material Disc material Stem material Seat and trim material Pressure and temperature rating WENZHOU VETZ VALVE CO., LTD SIZE STEM SEAT DESIGN SER. NO. TYPE CLASS PLUG DATE BODY RATING -29 WENZHOU VETZ VALVE CO., LTD 6
9 Features PRESSURE BALANCED TYPE LUBRICATED PLUG VALVES 3 life circles for one time grease adding; Advanced body design & emergency sealing system; Excellent casting finish & quality, no welding repair to the body; Special treatment to the plug in order to harden and lubricate the plug surface. Multi-process lapping to carry out the zero leakage without any lubricant for test. Standards VETZ Lubricated Type Plug Valves meet the requirements of BS5353. API 599 API 6D and ANSI B Valves made in materials to meet API 6A are also available. BS 2080 BS EN BS 6755 Pt 2 BS 5353 ANS B ANSI B API 6A API 6D API 599 API 6FA NACE MR0175 1SO 9001 Face to face, centre to face, end to end, and centre to end dimensions of flanged and butt welding end steel valves for the petroleum, petrochemical and allied industries. Testing of valves. Part 1 Specification for production pressure testing requirements Testing of valves. Part 2 Specification for fire type testing requirements. Specification for steel plug valves Face to face and end to end dimensions of ferrous valves. Valves flanged and butt welding end Specification for wellhead equipment. Specification for pipeline valves. Steel plug valves flanged or butt welding ends Fire test for valves. Sulphide stress cracking resistant metallic material for oilfield equipment. Quality Assurance approval standard. Inspection Policy for VETZ valves Every VETZ valve is subjected to a 100% pressure test according to API 598 requirements. Manufacturer s material test reports and Inspection and Test Certifications are available upon request. Some of the additional inspections and tests performed are: Random Radiograph Inspection of Body and Bonnet Castings to ASME B16.34 Appendix B Random Chemical Composition and Mechanical Properties Verification of Fasteners to ASTM A-193/A-194 Liquid Penetrate Inspection of Seat Rings Visual Inspection of Casting to MSS-SP-55 Receiving, In-Process, and Final Dimensional Inspections to Relevant Valve Standards Other inspections or tests can be performed or evaluation criteria applied when specified by the customer. WENZHOU VETZ VALVE CO., LTD 7
10 Design Features Plain Stem Design Are Used For All Specifications. WENZHOU VETZ VALVE CO., LTD 8
11 Design Features Threaded Stem Design (Optional) WENZHOU VETZ VALVE CO., LTD 9
12 Stress analysis to the body To prevent the body from being deformed at high pressure is a hard task for the designer when he/she designs a heavy duty plug valves. VETZ company is using a kind of advanced soft program to analyze the body s stress at high pressure to make out the deformation value. See below pictures, so as to seek a valid body-reinforced way. WENZHOU VETZ VALVE CO., LTD 10
13 Class 150 Short Pattern, NPS 1/2"~2", Fig No. BSL12CY WENZHOU VETZ VALVE CO., LTD 11
14 Class 150 Short Pattern, NPS 1"~6", Fig No. BSL42CY WENZHOU VETZ VALVE CO., LTD 12
15 Class 150 Short Pattern, NPS 6"~12", Fig No. BSG42CY n-f WENZHOU VETZ VALVE CO., LTD 13
16 Class 150 Venturi Pattern, NPS 14"~40", Fig No. BVG42CY WENZHOU VETZ VALVE CO., LTD 14
17 Class 300 Short Pattern, NPS 1/2"~2", Fig No. BSL13CY WENZHOU VETZ VALVE CO., LTD 15
18 Class 300 Short Pattern, NPS 1"~6", Fig No. BSL43CY WENZHOU VETZ VALVE CO., LTD 16
19 Class 300 Regular Pattern, NPS 4"~12", Fig No. BRG43CY WENZHOU VETZ VALVE CO., LTD 17
20 Class 300 Venturi Pattern, NPS 14"~40", Fig No. BVG43CY WENZHOU VETZ VALVE CO., LTD 18
21 Class 600 Regular Pattern, NPS 1/2"~2", Fig No. BRL16CY WENZHOU VETZ VALVE CO., LTD 19
22 Class 600 Regular Pattern, NPS 1"~4", Fig No. BRL46CY WENZHOU VETZ VALVE CO., LTD 20
23 Class 600 Regular Pattern, NPS 4"~10", Fig No. BRG46CY WENZHOU VETZ VALVE CO., LTD 21
24 Class 600 Venturi Pattern, NPS 6"~24", Fig No. BVG46CY WENZHOU VETZ VALVE CO., LTD 22
25 DATA SHEET FOR MOUNTED FLANGES & STEM TURQUE NPS CL ISO 5211 Code A B C D E F G H Stud Size I Hole Dia. L No. of Holes W Max. Stem Shear Torque N.M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M F M Remark: Nominal Torque of the actuator = the break torque * 1.5 (safety coefficient) Break Torque N.M WENZHOU VETZ VALVE CO., LTD 23
26 Gear Boxes Information Provided by VETZ company The gear boxes for plug valves provided by VETZ have five types, which respectively is 008W, 108W, 208W, 308W and 408W. They have high performances including water proof, locking device, macroadjustable on-off positions and impact design. WCB housing for heavy duty is available on your request. A type-chosen table is shown below. Consult us for sizes not shown. NPS Type PN 2" 3" 4" 6" 8" 10" 12" 16" class W 208W 208W 208W 308W class W 108W 208W 208W 308W 308W class W 208W 208W 308W 308W 308W Schematic Illustration for 008W, 108W and 208W types. WENZHOU VETZ VALVE CO., LTD 24
27 Data Sheet for type 308W. WENZHOU VETZ VALVE CO., LTD 25
28 Maximum Allowable Non-Shock Pressure, Bar. ASME B Serve Temp. Class 150 Class 300 Class 600 WCB (1) WC6 (2) (3) C5 (4) C12 (5) LCC (6) WCB (1) WC6 (2) (3) C5 (4) C12 (5) LCC (6) WCB (1) WC6 (2) (3) C5 (4) C12 (5) LCC (6) 29to (a) (c) (a) (c) (a) (c) (a) (c) (a) (c) WENZHOU VETZ VALVE CO., LTD 26
29 Serve Temp. Class 900 Class 1500 Class 2500 WCB (1) WC6 (2) (3) C5 (4) C12 (5) LCC (6) WCB (1) WC6 (2) (3) C5 (4) C12 (5) LCC (6) WCB (1) WC6 (2) (3) C5 (4) C12 (5) LCC (6) 29 to (1) Upon prolonged exposure to temperatures above 425C, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 425 C. (2) Use normalized and tempered material only. (3) Not to be used over 595 C. (4) Use normalized and tempered material only. (5) Use normalized and tempered material only. (6) Not to be used over 345 C. (a) Flanged end valve ratings terminate at 538 C. (b) Flanged end valve ratings terminate at 538 C (c) Use normalized and tempered material only. WENZHOU VETZ VALVE CO., LTD 27
30 Steel Pipe Flanges ASME B Class 150 RF to 2500 RF Class 150 Steel Pipe Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam 1/ /8 4 1/2 3/ /8 4 1/ /8 4 1/2 11/ /8 4 1/2 11/ /8 4 1/ /4 4 5/8 21/ /4 4 5/ /4 4 5/ /4 8 5/ /8 8 3/ /8 8 3/ /8 8 3/ / / / / / / / / / /4 Height of raised face is 0.06 (1.6mm) each. Dimensions in ( ) are for valve flanges. Class 300 Steel Pipe Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam 1/ /8 4 1/2 3/ /4 4 5/ /4 4 5/8 11/ /4 4 5/8 11/ /8 4 3/ /4 8 5/8 21/ /8 8 3/ /8 8 3/ /8 8 3/ /8 8 3/ /8 12 3/ /8 WENZHOU VETZ VALVE CO., LTD 28
31 Class 300 Steel Pipe Flange Dimensions (Continuous) Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam / / / / / / / / / / / / /2 Height of raised face is 0.06 (1.6mm) each. Class 600 Steel Pipe Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam 1/ /8 4 1/2 3/ /4 4 5/ /4 4 5/8 11/ /4 4 5/8 11/ /8 4 3/ /4 8 5/8 21/ /8 8 3/ /8 8 3/ / / / / / / / / / / / / / / / / / /8 Height of raised face is 0.25 (6.4mm) each WENZHOU VETZ VALVE CO., LTD 29
32 Class 900 Steel Pipe Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam 1/2-21/ Use Class 1500 dimensions in these sizes / /4 8 11/ /8 8 11/ / / / / / / / / / / / / / / , / /2 Height of raised face is 0.25 (6.4mm) each Class 1500 Steel Pipe Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam 1/ /8 4 3/4 3/ /8 4 3/ /8 11/ /8 11/ / /8 21/ / /4 8 11/ /8 8 11/ /8 8 11/ / / / / / / / / / / / / / / /2 Height of raised face is 0.25 (6.4mm) each. WENZHOU VETZ VALVE CO., LTD 30
33 Class 2500 Steel Pipe Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam 1/ /8 4 3/4 3/ /8 4 3/ /8 11/ / / /4 4 11/ / / /4 8 11/ /8 8 11/ /8 8 11/ /8 8 13/ / / / / / /4 C Height of raised face is 0.25 (6.4mm) each ASME B Class 150 RF, Class 300 RF The API-605 fianges are designated as Series B flanges in this standard. Class 150 Series B Integral Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam / / / / / / / / / / / / / /4 WENZHOU VETZ VALVE CO., LTD 31 Height of raised face is 0.06 (1.6mm) each
34 Class 300 Series B Integral Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam / / / / / / / / / / / /8 Height of raised face is 0.06 (1.6mm) each MSS SP Class 150 RF, Class 300 RF & Class 600 RF Class 150 Steel Pipe Line Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm m Number Diam /4 Height of raised face is 0.06 (1.6mm) each Class 300 Steel Pipe Line Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam /2 Height of raised face is 0.06 (1.6mm) each Class 600 Steel Pipe Line Flange Dimensions Nominal Size A B C D E Bolt in mm mm mm mm mm mm Number Diam /4 Height of raised face is 0.25 (6.4mm) each WENZHOU VETZ VALVE CO., LTD 32
35 Buttwelding End Details ASME B NOTES: (1) Internal surface may be as-formed or machined for dimension B at root face. Contour within the envelope shall be in accordance with section Dim. Pipe Nominal Pipe Size mm Sch. No. 21/ A B STD XS XXS Dim. Pipe Nominal Pipe Size mm Sch. No A ALL STD XS B WENZHOU VETZ VALVE CO., LTD 33
36 WENZHOU VETZ VALVE CO.,LTD. Head Office:1306Rm, A Building Huada Mansion, Oubei Town, Wenzhou, Zhejiang P.R. Of China Post Code: Tel: ; Fax: Factory Address:Quantai Industrial Development Zone, Zhangtai Town, Wencheng County, Zhejiang P.R. Of China, Post Code: Tel: ; Fax: Website: Contactors: Mr. Davis Zheng General Manager Daviszheng@ways-valves.com Cell Phone: Marketing Manager Mr. Charles Li Charles@ways-valves.com Cell Phone: QA Manager Mr. Yingfeng Liu qa-dept@ways-valves.com Cell Phone: WENZHOU VETZ VALVE CO., LTD 34
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More informationTECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationWENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
More informationtechnical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
More informationMSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationGWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
More informationtechnical description:
The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum
More informationCast Steel Valves. General Index. Figure Number Index -1-
Cast Valves General Index Cast Valves Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11 Globe Valve Features...12
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationThe globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
More informationECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationDistributed by: M&M Control Service, Inc brands you trust.
Distributed by: M&M Control Service, Inc. /stockham.php 800-876-0036 847-356-0566 brands you trust. STOCKHAM - Cast Valves Contents Performance in Any Application...4 How to Specify and Order Valves...4
More informationPETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK
PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class
More informationFig. VC900PS Design: ASME B16.34
Gate Valves Class 900 DN 50-500 (2 20 ) Carbon, Alloy and Stainless Steel PDS JC-900PS Rev.3 Fig. 900PS Design: ASME B16.34 JC Fábrica de válvulas, s.a. E-Mail: jc@jc-valves.com Internet: www.jc-valves.com
More informationCast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves
Cast Steel Carbon and Stainless Steel Gate, Globe and Check Valves Contents Cast Steel Standard Features 3 Testing, Modifications and Accessories Standard Product Range With DSI Zy-Gear Bevel Gear Chart
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationGALLI&CASSINA. Plug Valves. Conical
Conical Plug Pressure Balanced Type UPPER HOLE LOWER HOLE The Pressure Balanced Plug Contains 2 Holes: The Upper Holes Connects the Plug Port with the Area Above Plug. The Lower hole Maintains Pressure
More informationRAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
More informationCast Steel Valves. General Index. Figure Number Index JENKINS -1-
Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
More informationCast Steel Valves. Contents Contents. Figure Number Index. Figure Number Cross Reference. Valve Type Class Stockham Jenkins
Stockham Cast Valves Cast Valves Contents Contents Performance in Any Application...4 How to Specify and Order Valves...4 Installation, Marking and Identification...5 Gate Valves...6 Globe Valves...11
More informationThe excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More information*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationBUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
More informationHANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationRAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
More informationAIL METSEAL Butterfly Valves
AIL METSEAL Butterfly s The AIL METSEAL Butterfly is a high performance valve which is used for positive isolation in Power Generation, Petroleum Refining, Oil and Gas Production, Chemical, Petrochemical
More informationPRIMARY VALVE STANDARDS
ADELAIDE BRISBANE PERTH PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves - Flanged & Buttwelding Ends API 600 is the main steel gate valve specification.
More informationCast Steel Valves. General Index. Figure Number Index
Cast Valves General Index Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves... 11 Globe Valve Features... 12
More informationTECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
More informationButterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)
Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com
More informationKF Series T Ball Valves
K Series T Ball Valves Superior luid Control Products for the Petrochemical and Industrial Markets Series T Ball Valves This top entry valve with a one-piece trunnion supported ball conforms to API specifications
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationw w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.
A trusted name in industrial valve company FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.34 CATALOG NUMBER FFI -1004 TABLE OF CONTENTS
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationSOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
More informationGL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
More informationCarbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Carbon Steel Valves...1 Standard Product Range...2 Standard
More informationGA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationBall Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
More informationSUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC
SUFA WEDGE GATE VALVES CLASS 150/300/600/900/1500/2500 SUFA TECHNOLOGY INDUSTRY CO. LTD., CNNC INTRODUCTION Gate valves as shut off valves are used in the industrial area most commonly today. They are
More informationMaterials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve Bolted bonnet Vertical
More informationHIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
More informationGWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
More informationFIGURE NO. VALVE TYPE PRESSURE CLASS CONNECTIONS SIZE RANGE PAGE NO. 28 Stop Check Valve 300 Flanged 3" 10" 30
Cast Valves General Index Cast Valves Figure Number Index Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11
More informationarflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationProduct Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size Gate Valve Globe Valve Check Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 300 API 600 & B16.34
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationKOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
More information10.1 Introduction Connections Overview
Content 10.1 Introduction...10.1-1 10.2 Connections Overview...10.2-1 10.2.1 Pressure/Temperature Rating of Connection versus Safety Valve...10.2-1 10.2.2 Flanged Connections...10.2-1 10.2.3 Threaded Connections...10.2-2
More informationECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
More informationProven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
More informationVMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
More informationIntroduction Certifications References Standards Ball Valves Trunnion Mounted Ball Vaves Product Range...
CATALOGUE CONTENTS Introduction... 3 Certifications...4-5 References Standards... 6 Ball Valves... 7 Trunnion Mounted Ball Vaves... 8 Product Range... 9 Available Design Options... 10 Quality & Testing...
More informationDIPV Double Isolation Plug Valve. Double Block & Bleed Plug Valve
DIPV Double Isolation Plug Valve Double Block & Bleed Plug Valve Double Isolation Plug Valve Contents Introduction pages 3 & 4 Typical Installations pages 5 & 6 Range page 6 Main Features page 7 Figure
More informationAPI CATALOG. Flanged Safety Relief Valves Series 526. The-Safety-Valve.com
API Flanged Safety Relief Valves Series 526 CATALOG The-Safety-Valve.com NH 3 HCL Product Range LESER Safety Valves for every industrial application API High Performance Series 526 Type 526 Compact Performance
More informationS6/S5-SERIES METAL-SEATED FULL- AND STANDARD-BORE MBV BALL VALVES, 1/2" 12"
S6/S5-SERIES METAL-SEATED FULL- AND STANDARD-BORE MBV BALL VALVES, 1/2" 12" Series MBV S6/S5 metal-seated ball valves meet a wide range of severe-service requirements. These valves are your best choice
More informationTriple Offset Valves
Triple Offset Valves FLOWSEAL MS Value Statement For the harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, the Flowseal MS triple-offset
More informationVALVES AIL CAST STEEL GATE, GLOBE & CHECK AUDCO INDIA LIMITED. ASME Class mm mm (2-60 ) API 600 BS 1873 BS 1868 API 603
AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1500mm (2-60 ) API 600 BS 1873 BS 1868 API 603 ASME B16.34 API 6D AUDCO INDIA LIMITED Introduction AIL Cast Steel Gate, Globe and Check
More informationSales Agent: est William E. Williams Valve Corporation Warranty SEPT 2015
est. 1918 F ounded in 1918, William E. Williams Valve Corporation has continuously produced high quality valves for industrial and commercial applications including: oil refining, chemical processing,
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationFLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
More informationCLASS 150 & 300 REDUCED BORE BALL VALVES
CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:
More informationSeries A angle pattern control valves
Series A angle pattern control valves AU: Angle pattern-unbalanced top guided AB: Angle pattern-balanced cage guided AM: Angle pattern-omega multi-path & multi-stage Metso's Neles A series angle pattern
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2 to 16 ) Flanges R.F. Class 300 (PN50) - 29 C + 425 C Max Pressure : 50 Bars Specifications : Swing check valve
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationANSI Valve Standards. API Valve Standards
ANSI Valve s ANSI - the American National s Institute standardization and conformity assessment system. Code Name ANSI A126 ANSI A181 ANSI 816.10 ANSI 816.34 ANSI 8127.1 Grey iron castings for valves flanges
More informationbrands you trust. Noz-Chek - High Performance Nozzle-Type Non-Slam Check Valve Crane ChemPharma & Energy
brands you trust. Noz-Chek - High Performance Nozzle-Type Non-Slam Check Valve Crane ChemPharma & Energy Non-Slam Check Valves Scope of Line Sizes 2" 84" ASME B16.34 & API 6D, pressure classes 150 4500
More informationNELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
More informationHinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn
Hinge Pin Bearing Spring Plate Spring Disc Body Gasket Stop PIn TYPICAL MATERIAL OF MAIN PARTS No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Stop Pin 2 Gasket 3 Body 4 Disc 5 Spring 6 Spring
More informationHSV SERIES 2-PIECE BALL VALVES
HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve
More information394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
More informationH i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
More information