ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
|
|
- Leo Bradley
- 6 years ago
- Views:
Transcription
1 With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure max. 6 bar Stem protection by bellow Maintenance-free O-ring sealing Assembly of additional devices acc. to DIN IEC Page 4 Fig. 450 ARI-STEVI 450 / 451 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2,2-15 kn Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g. potentiometer Page ARI-STEVI 450 / 451 Electric actuator AUMA SAR Enclosure IP 67 2 torque switches 2 travel switches Handwheel Overheating protection for motor as standard Additional devices available, e.g. potentiometer Explosion proof version available Fig. 451 Page 12 Edition 08/13 - Data subject to alteration - Regularly updated data on Data sheet englisch (english)
2 ARI-STEVI 450 / 451 (DN15-150) Valve: Technical data Figure Nominal pressure Material Nominal diameter Information / restriction of technical rules need to be observed! ARI-Valves of EN-JL40 are not allowed to be operated in systems acc. to TRD / PN16 EN-JL40 DN / PN16 EN-JS49 DN / PN25 EN-JS49 DN / PN N DN / PN N DN / PN DN Other materials and versions on request. A production permission acc. to TRB 801 No. 45 is available. (EN-JL40 acc. to TRB 801 No. 45 is not allowed.) The engineer, designing a system or a plant, is responsible for the selection of the correct valve. Resistance and fitness must be verified, contact manufacturer for information (refer to Product overview and Resistance list). Stem sealing Fig. 450 standard optional DN DN DN I. PTFE-V-ring unit - C to 220 C I. EPDM-sealing - C to 150 C (allowed for water and steam up to 180 C) II. PTFE-packing - C to C II. Pure graphite-packing - C to 450 C Fig. 451 standard optional DN DN15-0 DN III. Stainless steel-bellow with pure graphite-packing -60 C to 450 C III. Stainless steel-bellow with V-ring unit -60 C to 220 C III. Stainless steel bellows seal with EPDM-sealing -60 C to 150 C (allowed for water and steam up to 180 C) Pressure-temperature-ratings Intermediate values for max. permissible operational pressures can be determined by linear interpolation of the given temperature / pressure chart. acc. to DIN EN C to <- C 1) - C to 120 C 150 C 200 C C 300 C 350 C 400 C 450 C EN-JL40 PN16 (bar) ,4 12,8 11,2 9, EN-JS49 PN16 (bar) on request 16 15,5 14,7 13,9 12,8 11, EN-JS49 PN25 (bar) on request 25 24, , , acc. to manufacturers standard -60 C to <- C 1) - C to 120 C 150 C 200 C C 300 C 350 C 400 C 450 C N PN25 (bar) 18, , , ,8 8, N PN40 (bar) , ,7 23,8 13,1 acc. to DIN EN C to <- C 1) - C to 0 C 150 C 200 C C 300 C 350 C 400 C 450 C PN40 (bar) ,3 33,7 31,8 29,7 28,5 27,4 -- 1) Valve with extended bonnet, studs and nuts made of A4-70 (at temperatures below - C) 2 Edition 08/13 - Data subject to alteration - Regularly updated data on
3 ARI-STEVI 450 / 451 (DN15-150) Plug design / Operation Plug design standard Guiding Rangeability A DN15-0: Mixing plug with one rolled seat ring and one screwed seat ring - Leakage class IV acc. to DIN EN Flow characteristic: linear (lin) / linear (lin) AB Spindle / Seat ring 30 : 1 Parabolic plug, metal seat; V-port plug, metal seat B A DN and stainless steel: Mixing plug with two screwed seat rings - Leakage class IV acc. to DIN EN Flow characteristic: linear (lin) / linear (lin) AB Spindle / Seat ring 30 : 1 Parabolic plug, metal seat; V-port plug, metal seat B A DN40-150: Diverting plug with two screwed seat rings - Leakage class IV acc. to DIN EN Flow characteristic: linear (lin) / linear (lin) AB Spindle / Seat ring 30 : 1 Parabolic plug, metal seat; V-port plug, metal seat Plug design optional Guiding Rangeability B A DN15-0: Mixing plug with two screwed seat rings - Leakage class IV acc. to DIN EN Flow characteristic: linear (lin) / linear (lin) - further reductions possible AB Spindle / Seat ring 30 : 1 Parabolic plug, metal seat; V-port plug, metal seat B Operation Design with mixing plug DN Design with diverting plug DN (Attention: reduced s) ARI-Control valves are suitable for use with pneumatic or electric actuators. According to the application two different variations are possible (see drawings on the left) Design with mixing plug as standard. Select when the valve is used for mixing service (2 inlets, 1 outlet). DN with mixing plug can also be used for diverting service (1 inlet, 2 outlets). In exceptions the design with mixing plug can also be used in diverting service for DN 40. Only small closing pressures are possible. Design with diverting plug will be used exclusively for diverting service. Edition 08/13 - Data subject to alteration - Regularly updated data on 3
4 Control valve in 3-way-form with pneumatic actuator DP (3-way mixing valve / 3-way diverting valve) ARI-STEVI 450 / 451 (DN15-150) Pneumatic actuator ARI-DP Fig. 450 Fig. 451 Heights and weights DN Fig. 450 DP32 H (mm) PN16 (kg) PN40 (kg) DP33 H (mm) PN16 (kg) PN40 (kg) DP34 H (mm) PN16 (kg) PN40 (kg) DP34T H (mm) PN16 (kg) PN40 (kg) Fig. 451 DP32 H (mm) PN16 (kg) PN40 (kg) DP33 H (mm) PN16 (kg) PN40 (kg) DP34 H (mm) PN16 (kg) PN40 (kg) DP34T H (mm) PN16 (kg) PN40 (kg) Further dimensions refer to pages Edition 08/13 - Data subject to alteration - Regularly updated data on
5 ARI-STEVI 450 / 451 (DN15-150) Pneumatic actuator ARI-DP DP32 / DP33 / DP34 DP34T Actuator data DP32 DP33 DP34 DP34T Ø A (mm) Effective diaphragm area (cm 2 ) Top mounted handwheel Air supply pressure max. to actuator: Ø D1 (mm) H1 (mm) Weight (kg) bar Further technical data of the actuator: refer to data sheet ARI-DP. Edition 08/13 - Data subject to alteration - Regularly updated data on 5
6 ARI-STEVI 450 / 451 (DN15-150) s: Pneumatic actuator ARI-DP32 max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page 2. DN Mixing function 4 2,5 6,3 4 6,3 max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 21/20 21/25 27/27 31/32 41/40 51/50 66/60 81/75 1/95 120/ /140 Travel (mm) DP32 I. (bar) 5,5 3,3 2,6 1,4 cm 2 A -> AB 0,2-1,0 1,2 II. (bar) 2,3 1 III. (bar) I. (bar) 18,6 12,6,7 7,2 3,9 2,2 (stem retracting or B -> AB Spring range (bar) 0,4-1,2 1,6 Air supply pressure min. (bar) 2) 0,8-2,4 3,2 1,5-2,9 4,4 II. (bar) 15,4,3 8,7 5,8 3 1,6 III. (bar) 8,6 8 7,1 4,6 1,7 I. (bar) 40 31,4 26,8 18,8 11 6,8 3,7 2,2 1,2 II. (bar) 40 29,1 24,8 17,4,2 6,3 3,2 1,9 1 III. (bar) 26,4 25,7 23,2 16,2 8,9 5,4 2,9 1,7 I. (bar) ,1 23,5 15 II. (bar) ,7 22,7 14,4 III. (bar) ,5 21,4 13,6 I. (bar) 40 32,5 20,8 (stem extending 2,0-3,8 5,8 II. (bar) 40 31,6 20,2 III. (bar) 40 30,3 19,4 DN Diverting function ,5 mixing plug for diverting 6,3 4 6, max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 21/20 21/25 27/27 31/32 40/40 50/50 60/60 75/75 90/90 5/5 125/125 Travel (mm) DP32 I. (bar) 2,7 1,6 1,3 cm 2 AB -> A 0,2-1,0 1,2 II. (bar) 1,1 III. (bar) I. (bar) 9,3 6,3 5,3 3,6 4,1 2,3 1,2 (stem extending or AB -> B Spring range (bar) 0,4-1,2 1,6 Air supply pressure min. (bar) 2) 0,8-2,4 3,2 1,5-2,9 4,4 II. (bar) 7,7 5,2 4,3 2,9 3,2 1,7 III. (bar) 4,3 4 3,5 2,3 1,9 I. (bar) 22,5 15,7 13,4 9,4 11,6 7,1 4,5 2,7 1,7 1,1 II. (bar) 20,8 14,5 12,4 8,7,6 6,5 4 2,3 1,4 III. (bar) 13,2 12,9 11,6 8,1 9,3 5,6 3,7 2,1 1,3 I. (bar) 40 32,1 27,5 19,6 24,5 15,4 II. (bar) 40 30,9 26,5 18,8 23,6 14,8 III. (bar) 28,7 28,4 25,7 18,3 22,3 14 I. (bar) 40 37,6 26,8 33,8 21,4 (stem retracting 2,0-3,8 5,8 II. (bar) 40 36,6 26,1 32,9 20,8 III. (bar) 39,8 39,5 35,8 25,5 31,6 19,9 I. Fig. 450: PTFE-V-ring unit / EPDM-sealing II. Fig. 450: PTFE- / pure graphite-packing III. Fig. 451: Bellows seal 1) max. differential pressure drop 2) Air supply pressure max. to actuator: 6 bar Restriction: a) 5 bar b) 4,5 bar c) 4 bar d) 3,5 bar e) 3 bar 6 Edition 08/13 - Data subject to alteration - Regularly updated data on
7 ARI-STEVI 450 / 451 (DN15-150) s: Pneumatic actuator ARI-DP33 max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page 2. DN Mixing function DP cm 2 A -> AB (stem retracting or B -> AB (stem extending 4 2,5 6,3 4 6,3 max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 21/20 21/25 27/27 31/32 41/40 51/50 66/60 81/75 1/95 120/ /140 Travel (mm) Spring range (bar) 0,2-1,0 Air supply pressure min. (bar) 2) 1,2 0,4-1,2 1,6 0,8-2,4 3,2 1,5-3,0 4,5 1,7-2,7 4,4 2,0-4,0 (2,3-3,7) 6,0 (6,0) I. (bar) 13,3 c) 3) 8,8 c) 3) 7,4 c) 3) 4,9 c) 3) 2,4 c) 3) 1,2 c) 3) II. (bar),1 c) 3) 6,5 c) 3) 5,4 c) 3) 3,4 c) 3) 1,6 c) 3) III. (bar) 5 a) 3) 4,3 a) 3) 3,8 a) 3) 2,2 a) 3) I. (bar) 34,2 c) 3) 23,7 c) 3) 20,2 c) 3) 14,1 c) 3) 8,1 c) 3) 4,9 c) 3) 2,5 3) 1,4 3) II. (bar) 31 c) 3) 21,4 c) 3) 18,3 c) 3) 12,7 c) 3) 7,3 c) 3) 4,4 c) 3) 2,1 3) 1,1 3) III. (bar) 19,1 a) 3) 18,5 a) 3) 16,6 a) 3) 11,5 a) 3) 5,9 a) 3) 3,5 a) 3) 1,8 a) 3) I. (bar) 40 a) 3) 40 a) 3) 40 a) 3) 32,5 a) 3) 19,5 a) 3) 12,3 a) 3) 7 3) 4,4 3) 2,6 3) II. (bar) 40 a) 3) 40 a) 3) 40 a) 3) 31,1 a) 3) 18,6 a) 3) 11,8 a) 3) 6,5 3) 4,1 3) 2,4 3) III. (bar) 40 3) 40 3) 40 3) 29,9 3) 17,3 3),9 3) 6,2 3) 3,9 3) 2,3 3) I. (bar) 14,8 9,6 6 II. (bar) 14,3 9,3 5,8 III. (bar) 14 9,1 5,7 I. (bar) 40 a) 40 a) 29 a) II. (bar) 40 a) 40 a) 28,4 a) III. (bar) ,6 I. (bar) (40) 20,3 13,3 8,4 II. (bar) (39,5) 19,9 12,9 8,2 III. (bar) (38,7) 19,6 12,8 8,1 320 DN ,5 mixing plug for diverting 6,3 4 6, max. diff. pressure 1) (bar) Diverting function DP cm 2 AB -> A (stem extending or AB -> B (stem retracting Seat-Ø A/B (mm) 21/20 21/25 27/27 31/32 40/40 50/50 60/60 75/75 90/90 5/5 125/125 Travel (mm) Spring range (bar) 0,2-1,0 Air supply pressure min. (bar) 2) 1,2 0,4-1,2 1,6 0,8-2,4 3,2 1,5-3,0 4,5 1,7-2,7 4,4 2,0-4,0 (2,3-3,7) 6,0 (6,0) I. (bar) 6,6 c) 4) 4,4 c) 4) 3,7 c) 4) 2,4 c) 4) 2,6 c) 4) 1,3 c) 4) II. (bar) 5 c) 4) 3,3 c) 4) 2,7 c) 4) 1,7 c) 4) 1,7 c) 4) III. (bar) 2,5 a) 4) 2,2 a)4) 1,9 a)4) 1,1 a)4) I. (bar) 17,1 c) 4) 11,9 c)4),1 c)4) 7 c)4) 8,5 c)4) 5,1 c)4) 3,2 4) 1,8 4) 1,1 4) II. (bar) 15,5 c) 4),7 c)4) 9,1 c)4) 6,3 c)4) 7,6 c)4) 4,5 c)4) 2,6 4) 1,4 4) III. (bar) 9,6 a) 4) 9,2 a)4) 8,3 a)4) 5,7 a)4) 6,3 a)4) 3,6 a)4) 2,3 a)4) 1,2 a)4) I. (bar) 38 a) 4) 26,8 a)4) 23 a)4) 16,3 a)4) 20,3 a)4) 12,7 a)4) 8,5 4) 5,2 4) 3,5 4) 2,4 4) 1,6 4) II. (bar) 36,4 a) 4) 25,6 a)4) 22 a)4) 15,6 a)4) 19,4 a)4) 12,1 a)4) 8 4) 4,9 4) 3,2 4) 2,2 4) 1,4 4) III. (bar) 23,7 4) 23,4 4) 21,2 4) 15 4) 18,1 4) 11,3 4) 7,6 4) 4,7 4) 3,1 4) 1,9 4) 1,2 4) I. (bar) 17,9 11,2 7,7 5,4 3,7 II. (bar) 17,3,9 7,4 5,2 3,6 III. (bar) 17,7 7,3 5 3,4 I. (bar) 40 a) 40 a) 40 a) 37 a) 40 a) 29,8 a) II. (bar) 40 a) 40 a) 40 a) 36,3 a) 40 a) 29,3 a) III. (bar) , ,4 I. (bar) (40) (40) (40) 24,5 15,5,7 7,6 5,3 II. (bar) (40) (40) (40) 24 15,2,4 7,4 5,1 III. (bar) (40) (40) (39,8) 23,6 15,3 7,2 5 I. Fig. 450: PTFE-V-ring unit / EPDM-sealing II. Fig. 450: PTFE- / pure graphite-packing III. Fig. 451: Bellows seal 1) max. differential pressure drop 2) Air supply pressure max. to actuator: 6 bar Restriction: a) 5 bar b) 4,5 bar c) 4 bar d) 3,5 bar e) 3 bar 3) At mixing function an spring closes direction A->AB, the max. permissible air supply pressure is 3,5 bar. 4) At diverting function an spring closes direction B->AB, the max. permissible air supply pressure is 3,5 bar. Edition 08/13 - Data subject to alteration - Regularly updated data on 7
8 ARI-STEVI 450 / 451 (DN15-150) s: Pneumatic actuator ARI-DP34 max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page 2. DN max. diff. pressure 1) (bar) Mixing function DP cm 2 A -> AB (stem retracting or B -> AB Seat-Ø A/B (mm) 66/60 81/75 1/95 120/ /140 Travel (mm) I. (bar) 2,5 b) 1,5 b) 0,2-1,0 1,2 II. (bar) 2,1 b) 1,2 b) III. (bar) 1,8 e) 1 e) I. (bar) 7 b) 4,4 b) 2,7 b) 1,8 1,2 0,4-1,2 1,6 II. (bar) 6,6 b) 4,1 b) 2,5 b) 1,6 1,1 III. (bar) 6,3 d) 3,9 d) 2,3 d) 1,4 a) I. (bar) 16,4 6,5 4,5 3,2 Spring range (bar) 0,8-2,4 3,2 Air supply pressure min. (bar) 2) 1,5-3,0 4,5 II. (bar) 15,5,1 6,3 4,3 3,1 III. (bar) 15,2 b) 9,9 b) 6,2 b) 4,1 3 I. (bar) 9,3 6,7 II. (bar) 9,1 6,6 III. (bar) 8,9 6,5 2,0-2,9 4,9 III. (bar) 40 27,7 a) 17,7 a) 2,1-3,0 5,1 I. (bar) 40 29,7 19 II. (bar) 40 29,4 18,8 (stem extending 2,0-4,0 6,0 2,4-3,6 6,0 I. (bar) 12,7 9,2 II. (bar) 12,5 9,1 III. (bar) 12,3 9 I. (bar) 34,2 21,9 II. (bar) 33,9 21,7 III. (bar) DN max. diff. pressure 1) (bar) Diverting function DP cm 2 AB -> A (stem extending or AB -> B (stem retracting Seat-Ø A/B (mm) 60/60 75/75 90/90 5/5 125/125 Travel (mm) 30 I. (bar) 3,2 b) 1,8 b) 1,1 b) 0,2-1,0 1,2 II. (bar) 2,7 b) 1,5 b) III. (bar) 2,3 e) 1,2 e) I. (bar) 8,6 b) 5,3 b) 3,5 b) 2,4 1,6 Spring range (bar) 0,4-1,2 1,6 Air supply pressure min. (bar) 2) 0,8-2,4 3,2 2,1-3,0 2,0-2,9* 5,1 4,9* 2,4-3,6 6,0 II. (bar) 8 b) 4,9 b) 3,2 b) 2,2 1,4 III. (bar) 7,7 d) 4,7 d) 3,1 d) 2 a) 1,3 a) I. (bar) 19,3 12,2 8,3 5,9 4,1 II. (bar) 18,8 11,8 8,1 5,7 3,9 III. (bar) 18,4 b) 11,6 b) 7,9 b) 5,5 3,8 I. (bar) 40 34, ,4 12,2 II. (bar) 40 34,3 23,8 17,2 12 III. (bar) 40 a)* 32,4 a)* 22,4 a)* 16,9 11,9 I. (bar) 39,9 27, ,1 II. (bar) 39,5 27,4 19,8 13,9 III. (bar) 19,6 13,8 I. Fig. 450: PTFE-V-ring unit / EPDM-sealing II. Fig. 450: PTFE- / pure graphite-packing III. Fig. 451: Bellows seal 1) max. differential pressure drop 2) Air supply pressure max. to actuator: 6 bar Restriction: a) 5 bar b) 4,5 bar c) 4 bar d) 3,5 bar e) 3 bar 8 Edition 08/13 - Data subject to alteration - Regularly updated data on
9 ARI-STEVI 450 / 451 (DN ) s: Pneumatic actuator ARI-DP34T max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page 2. DN Mixing function DP34T 0 cm 2 A -> AB max. diff. pressure 1) (bar) 15 Seat-Ø A/B (mm) 120/ /140 Travel (mm) 50 0,2-1,0 1,2 I. (bar) 1,7 1,2 II. (bar) 1,4 -- III. (bar) 1,3 a) -- I. (bar) 4,5 3, ,4-1,2 1,6 II. (bar) 4,1 2,9 (stem retracting or B -> AB Spring range (bar) Air supply pressure min. (bar) 2) 0,8-2,4 3,2 1,5-3,0 4,5 III. (bar) 4 a) 2,9 a) I. (bar) 9,9 7,2 II. (bar) 9,6 7 III. (bar) 9,5 6,9 I. (bar) 19,5 14,3 II. (bar) 19,1 14 III. (bar) 19 13,9 I. (bar) 26,3 19,3 (stem extending 2,0-4,0 6,0 II. (bar) III. (bar) 25,9 18,9 DN max. diff. pressure 1) (bar) 15 Diverting function DP34T 0 cm 2 AB -> A Seat-Ø A/B (mm) 5/5 125/125 Travel (mm) 30 I. (bar) 2,4 1,6 0,2-1,0 1,2 II. (bar) 1,9 1,2 III. (bar) 1,8 a) 1,1 a) I. (bar) 5,9 4,1 0,4-1,2 1,6 II. (bar) 5,5 3,7 (stem extending or AB -> B Spring range (bar) Air supply pressure min. (bar) 2) 0,8-2,4 3,2 2,1-3,0 5,1 III. (bar) 5,3 a) 3,6 a) I. (bar) 12,9 9,1 II. (bar) 12,5 8,7 III. (bar) 12,4 8,6 I. (bar) 35,9 25,3 II. (bar) 35,4 25 III. (bar) 35,3 24,9 I. (bar) (stem retracting 2,4-3,6 6,0 II. (bar) 40 28,7 III. (bar) 40 28,6 I. Fig. 450: EPDM-sealing II. Fig. 450: PTFE- / pure graphite-packing III. Fig. 451: Bellows seal 1) max. differential pressure drop 2) Air supply pressure max. to actuator: 6 bar Restriction: a) 5 bar b) 4,5 bar c) 4 bar d) 3,5 bar e) 3 bar Edition 08/13 - Data subject to alteration - Regularly updated data on 9
10 Control valve in 3-way-form with electric actuator ARI-PREMIO (3-way mixing valve / 3-way diverting valve) ARI-STEVI 450 / 451 (DN15-150) Electric actuator ARI-PREMIO / PREMIO-Plus Fig. 450 Fig. 451 Actuator data 2,2-5 kn kn A (mm) B (mm) C (mm) Ø D1 (mm) X (mm) Motor voltage: 230V 50Hz Other voltages: 24V 50/60Hz; 115V 50/60Hz; 230V 60Hz Further technical data of the actuator: refer to data sheet ARI-PREMIO/PREMIO-Plus Heights and weights DN Fig ,2 kn H (mm) PN16 (kg) PN40 (kg) kn H (mm) PN16 (kg) PN40 (kg) kn 15 kn H (mm) PN16 (kg) PN40 (kg) Fig ,2 kn H (mm) PN16 (kg) PN40 (kg) 14 15,3 16,6 19,2 24, ,9 48, kn H (mm) PN16 (kg) PN40 (kg) , kn 15 kn Further dimensions refer to pages H (mm) PN16 (kg) PN40 (kg) Edition 08/13 - Data subject to alteration - Regularly updated data on
11 ARI-STEVI 450 / 451 (DN15-150) s: Electric actuator ARI-PREMIO / PREMIO-Plus max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page 2. DN Mixing function 2,2 kn 5 kn 12 kn 15 kn DN Diverting function 2,2 kn 5 kn 12 kn 15 kn (m 3 4 6, /h) 2,5 4 6, max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 21/20 21/25 27/27 31/32 41/40 51/50 66/60 81/75 1/95 120/ /140 Travel (mm) I. (bar) 40 35,9 30,8 21,7 12,8 8 4,3 2,7 1,5 II. (bar) 40 33,7 28,8 20,2 11,9 7,4 3,9 2,3 1,3 III. (bar) 30,7 30,1 27,1 19,1,6 6,5 3,6 2,2 1,2 Operating time (50 Hz) (s) Operating speed (mm/s) 0,38 I. (bar) ,2 21,3 12,3 8 4,9 3,4 2,4 II. (bar) ,3 20,7 11,9 7,6 4,7 3,2 2,3 III. (bar) ,8 11,6 7,5 4,6 3 2,1 Operating time (50 Hz) (s) Operating speed (mm/s) 0,38 I. (bar) ,3 21,2 13,5 9,5 6,9 II. (bar) ,8 20,9 13,3 9,3 6,8 III. (bar) ,6 20,7 13,2 9,1 6,6 Operating time (50 Hz) (s) Operating speed (mm/s) 0,38 I. (bar) 40 26,9 17,2 12,1 8,8 II. (bar) 40 26, ,9 8,7 III. (bar) 40 26,4 16,9 11,7 8,5 Operating time (50 Hz) (s) Operating speed (mm/s) 0, mixing plug for diverting ,3 16 2,5 4 6, max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 21/20 21/25 27/27 31/32 40/40 50/50 60/60 75/75 90/90 5/5 125/125 Travel (mm) I. (bar) 25, ,4,8 13,4 8,2 5,4 3,2 2 1,3 II. (bar) 24,1 16,8 14,4,1 12,5 7,6 4,8 2,8 1,8 1,1 III. (bar) 15, ,6 9,5 11,1 6,8 4,5 2,6 1,6 Operating time (50 Hz) (s) Operating speed (mm/s) 0,38 I. (bar) ,5 27,4 34,6 21,9 15 9,4 6,4 4,5 3,1 II. (bar) ,5 26,7 33,7 21,3 14,4 9 6,1 4,3 2,9 III. (bar) ,6 26,1 32,3 20,4 14,1 8, ,7 Operating time (50 Hz) (s) Operating speed (mm/s) 0,38 I. (bar) ,9 24,8 17,1 12,3 8,6 II. (bar) ,4 24,4 16,9 12,1 8,5 III. (bar) ,2 16,7 11,9 8,3 Operating time (50 Hz) (s) Operating speed (mm/s) 0,38 I. (bar) 40 31,4 21,7 15,7 11 II. (bar) 40 31,1 21,5 15,5,9 III. (bar) 40 30,8 21,3 15,3,7 Operating time (50 Hz) (s) 79 Operating speed (mm/s) 0, I. Fig. 450: PTFE-V-ring unit / EPDM-sealing II. Fig. 450: PTFE- / pure graphite-packing III. Fig. 451: Bellows seal 1) max. differential pressure drop Edition 08/13 - Data subject to alteration - Regularly updated data on 11
12 Control valve in straightway form with electric actuator AUMA (3-way mixing valve / 3-way diverting valve) ARI-STEVI 450 / 451 (DN25-150) Electric actuator Auma SAR (MATIC) Fig. 450 Fig. 451 Heights and weights DN Fig. 450 SAR 07.2 SAR 07.6 Fig. 451 SAR 07.2 SAR 07.6 H (mm) PN16 (kg) PN40 (kg) SAR.2 H (mm) PN16 (kg) PN40 (kg) SAR 14.2 H (mm) PN16 (kg) PN40 (kg) H (mm) PN16 (kg) PN40 (kg) SAR.2 H (mm) PN16 (kg) PN40 (kg) SAR 14.2 H (mm) PN16 (kg) PN40 (kg) For version with AUMA SAR Ex other heights. Further dimensions refer to pages Actuator data SAR 07.2 SAR 07.6 SAR.2 SAR 14.2 A (mm) B (mm) H1 (AUMA MATIC) (mm) Motor voltage: 400V 50Hz 3~ (Other voltages on request) Technical data for actuator refer to price list. 12 Edition 08/13 - Data subject to alteration - Regularly updated data on
13 ARI-STEVI 450 / 451 (DN25-150) s: Electric actuator Auma SAR (MATIC) max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page 2. Fig. 450 DN Mixing function SAR 07.2 TR 20 x 4 - LH SAR 07.6 TR 26 x 5 - LH SAR.2 TR 26 x 5 - LH 6,3 16 max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 27/27 31/32 41/40 51/50 66/60 81/75 1/95 120/ /140 Travel (mm) I./II shut off (bar) , ,4 9,7 controlling 2) (bar) ,5 21,4 14 8,8 6,1 4,4 Torque (Nm) Operating time (50 Hz) (s) (rpm) 5,6 8 8 I./II. shut off (bar) ,9 18,9 13,8 controlling 2) (bar) 40 30, ,8 8,9 6,5 Torque (Nm) Operating time (50 Hz) (s) (rpm) 5,6 5,6 11 I./II. shut off (bar) ,6 32,3 23,7 controlling 2) (bar) ,9 18,9 13,8 Torque (Nm) Operating time (50 Hz) (s) (rpm) 5, SAR 14.2 TR 30 x 6 - LH II. shut off (bar) controlling 2) (bar) 31,3 22,9 Torque (Nm) Operating time (50 Hz) (s) 63 (rpm) 8 Fig. 451 DN Mixing function SAR 07.2 TR 20 x 4 - LH SAR 07.6 TR 26 x 5 - LH SAR.2 TR 26 x 5 - LH SAR 14.2 TR 30 x 6 - LH 6,3 16 max. diff. pressure 1) (bar) Seat-Ø A/B (mm) 27/27 31/32 41/40 51/50 66/60 81/75 1/95 120/ /140 Travel (mm) III shut off (bar) ,5 18,9 13,2 9,6 controlling 2) (bar) ,7 21,1 13,8 8,7 5,9 4,3 Torque (Nm) Operating time (50 Hz) (s) (rpm) 5,6 8 8 III. shut off (bar) ,8 19,7 18,8 13,7 controlling 2) (bar) 40 30,2 19,8 12,6 8,7 6,3 Torque (Nm) Operating time (50 Hz) (s) (rpm) 5,6 5,6 11 III. shut off (bar) 28,8 21,1 controlling 2) (bar) 18,8 13,7 Torque (Nm) Operating time (50 Hz) (s) 55 (rpm) 11 III. shut off (bar) 40 38,9 controlling 2) (bar) 31,2 22,9 Torque (Nm) Operating time (50 Hz) (s) 63 (rpm) I. Fig. 450: PTFE-V-ring unit / EPDM-sealing; II. Fig. 450: PTFE- / pure graphite-packing; III. Fig. 451: Bellows seal 1) max. differential pressure drop 2) Restrictions through max. permissible torque of the actuator at controlling operation. Edition 08/13 - Data subject to alteration - Regularly updated data on 13
14 ARI-STEVI 450 / 451 (DN25-150) s: Electric actuator AUMA SAR max. permissible closing pressures on flow-to-open P2 = 0. Observe pressure-temperature-limits, refer to page Fig. 450 DN mixing plug for diverting , max. diff. pressure 1) (bar) Diverting function Seat-Ø A/B (mm) 27/27 31/32 40/40 50/50 60/60 75/75 90/90 5/5 125/125 Travel (mm) I./II. shut off (bar) , ,4 12,2 controlling 2) (bar) ,6 25,8 16,4 11,2 8 5,6 SAR 07.2 TR 20 x 4 - LH SAR 07.6 TR 26 x 5 - LH SAR.2 TR 26 x 5 - LH SAR 14.2 TR 30 x 6 - LH Torque (Nm) Operating time (s) (rpm) 5,6 8 I./II. shut off (bar) ,9 24,6 17,3 controlling 2) (bar) 40 36,8 23,4 16,2 11,6 8,1 Torque (Nm) Operating time (s) (rpm) 5,6 5,6 I./II. shut off (bar) , ,5 controlling 2) (bar) ,9 24,6 17,3 Torque (Nm) Operating time (s) 64 (min -2 ) 5,6 II. shut off (bar) controlling 2) (bar) 40 28,6 Torque (Nm) Operating time (s) 38 (rpm) Fig. 451 DN mixing plug for diverting , max. diff. pressure 1) (bar) Diverting function Seat-Ø A/B (mm) 27/27 31/32 40/40 50/50 60/60 75/75 90/90 5/5 125/125 Travel (mm) III. shut off (bar) ,5 23,9 17,1 12 controlling 2) (bar) ,7 25,5 16,1 11,1 7,8 5,4 SAR 07.2 TR 20 x 4 - LH SAR 07.6 TR 26 x 5 - LH SAR.2 TR 26 x 5 - LH SAR 14.2 TR 30 x 6 - LH Torque (Nm) Operating time (s) (min -2 ) 5,6 8 III. shut off (bar) ,9 24,9 24,3 17,1 controlling 2) (bar) 40 36,4 23, ,4 7,9 Torque (Nm) Operating time (s) (min -2 ) 5,6 5,6 III. shut off (bar) 37,3 26,3 controlling 2) (bar) 24,3 17,1 Torque (Nm) Operating time (s) 64 (min -2 ) 5,6 III. shut off (bar) 40 35,9 controlling 2) (bar) 40 28,5 Torque (Nm) Operating time (s) 38 (min -2 ) 8 I. Fig. 450: PTFE-V-ring unit / EPDM-sealing; II. Fig. 450: PTFE- / pure graphite-packing; III. Fig. 451: Bellows seal 1) max. differential pressure drop 2) Restrictions through max. permissible torque of the actuator at controlling operation. 14 Edition 08/13 - Data subject to alteration - Regularly updated data on
15 ARI-STEVI 450 / 451 (DN25-150) s: Electric actuator AUMA SAR Edition 08/13 - Data subject to alteration - Regularly updated data on 15
16 Control valve in 3-way-form ARI-STEVI 450 / 451 (DN15-150) Dimensions: Standard design Fig. 450 DN (e.g.: DP32-34; PREMIO 2,2-15kN; AUMA ) Fig. 451 DN (e.g.: DP32-34; PREMIO 2,2-15kN; AUMA ) DN Dimensions M Fig. 450 (mm) M M14x1,5 M16x1,5 Fig. 451 (mm) M12 M16 H1 Fig. 450 (mm) Fig. 451 (mm) H2 Fig. 450 / Fig. 451 (mm) 83 H3 Fig. 450 / Fig. 451 (mm) A Fig. 450 / Fig. 451 (mm) 0 n x ØB Fig. 450 / Fig. 451 (mm) 2 x 16 Face-to-face dimension FTF series 1 according to DIN EN 558 L (mm) Flanges acc. to DIN EN 92-1/-2 Flange holes / -thickness tolerances acc. to DIN 2533/2544/2545 ØD PN16 (mm) PN25 / 40 (mm) ØK PN16 (mm) PN25 / 40 (mm) n x Ød PN16 (mm) 4 x 14 4 x 18 8 x 18 8 x 22 PN25 / 40 (mm) 4 x 14 4 x 18 8 x 18 8 x 22 8 x 26 Weights Fig. 450 Fig. 451 PN16 (JL 40) (kg) 5,1 6,1 7,1 9, ,8 23, ,5 67,4 94,8 PN40 ( N) (kg) 5,6 6,7 7,7,6 14,2 18,3 25,6 32,6 50,6 94,9 137,6 PN16 (JL 40) (kg) 8,1 9,1,3 12,7 17,5 20,7 29,8 39,7 57,4 77,4 4,8 PN40 ( N) (kg) 8,8 9,9 11,2 13,8 19,1 22,6 32,5 43,3 62,6 5,4 148,1 max. permissible thrust Fig. 450 (kn) 12,7 29,5 40,6 Fig. 451 (kn) 18, Edition 08/13 - Data subject to alteration - Regularly updated data on
17 ARI-STEVI 450 / 451 (DN ) Dimensions: Stem connection M27 Control valve in 3-way-form Fig. 450 DN (e.g.: DP34T-34Tri) Fig. 450 DN (e.g.: DP35; AUMA ) DN Dimensions M Fig. 450 / 451 (mm) M27 H1 Fig. 450 (mm) Fig. 451 (mm) H2 Fig. 450 (mm) 98 Fig. 451 (mm) 185 H3 Fig. 450/451 (mm) H4 Fig. 450 (mm) H5 Fig. 450 (mm) 130 A Fig. 450 (mm) 0 n x ØB Fig. 450 (mm) 2 x 16 A1 Fig. 450 / 451 (mm) 150 n x ØB1 Fig. 450 / 451 (mm) 4 x 16 A2 Fig. 450 (mm) 170 M1 Fig. 450 (mm) M20 T Fig. 450 (mm) 32 Face-to-face dimension FTF series 1 according to DIN EN 558 L (mm) Flanges acc. to DIN EN 92-1/-2 ØD PN16 (mm) 285 PN25 / 40 (mm) ØK PN16 (mm) PN25 / 40 (mm) 220 n x Ød PN16 (mm) 8 x 18 8 x 22 PN25 / 40 (mm) 8 x 26 8 x 26 Weights Fig. 450 Fig. 451 PN16 (JL 40) (kg) 82 6 PN40 ( N) (kg) PN16 (JL 40) (kg) PN40 ( N) (kg) max. permissible thrust Fig. 450 (kn) 112 Fig. 451 (kn) 70 Fig. 451 DN (e.g.: DP34T-35; AUMA 14.2) Edition 08/13 - Data subject to alteration - Regularly updated data on 17
18 ARI-STEVI 450 (DN15-150) Parts: Standard design I. EPDM-sealing I. PTFE-V-ring unit Diverting plug DN40 upwards II. PTFE- / pure graphite-packing Pos. Sp.p. Description Fig Fig / Fig Fig / Fig Fig Body EN-GJL-, EN-JL40 EN-GJS U-LT, EN-JS49 GP240GH+N, N GX5CrNiMo , Seat ring X20Cr13+QT, QT -- 2 x Seat ring X20Cr13+QT, QT X6CrNiMoTi , x Plug X20Cr13+QT, QT X6CrNiMoTi , x Hexagon nut 8-A2B -- 5 x Spindle X20Cr13+QT, QT X6CrNiMoTi , Mounting bonnet EN-GJS U-LT, EN-JS49 GP240GH+N, N GX5CrNiMo , Giude bushing X20Cr13+QT, QT (hardened) X6CrNiMoTi , x Gasket Pure graphite (CrNi laminated with graphite) Stud 25CrMo4, A Hexagon nuts C35E, A4 12 V-ring unit PTFE 14 Washer X5CrNi18-, Compression spring XCrNi18-8, Bush PTFE (strengthened) 17 Gasket Cu / Soft iron X6CrNiMoTi , Set: refer to Pos Scraper PTFE (strengthened) 13/49 x Packing ring PTFE or Pure graphite 19 x Coupling X8CrNiS18-9, x Plug X20Cr13+QT, QT X6CrNiMoTi , x Distance bush X5CrNi18-, x Stem adapter X20Cr13+QT, QT X6CrNiMoTi , x Plug X20Cr13+QT, QT X6CrNiMoTi , x Spindle X20Cr13+QT, QT X6CrNiMoTi , x Coupling X8CrNiS18-9, x Hexagon nut -- A4 61 Lock washer pair -- A4 Stem sealings Fig x V-ring unit (set) Set of: Pos. 12, 14, 15, 16, 17, x EPDM-sealing, cpl. EPDM / X20Cr13+QT, QT / X8CrNiS18-9, /49 x Packing ring PTFE 13/49 x Packing ring Pure graphite Spare parts 18 Edition 08/13 - Data subject to alteration - Regularly updated data on
19 ARI-STEVI 451 (DN15-150) Parts: Standard design III. Stainless steel-bellow with V-ring unit III. PTFE-packing / Pure graphite-packing Diverting plug DN40 upwards III. Stainless steel bellows seal with EPDM-sealing Pos. Sp.p. Description Fig Fig / Fig Fig / Fig Fig Body EN-GJL-, EN-JL40 EN-GJS U-LT, EN-JS49 GP240GH+N, N GX5CrNiMo , Seat ring X20Cr13+QT, QT -- 2 x Seat ring X20Cr13+QT, QT X6CrNiMoTi , x Plug X20Cr13+QT, QT X6CrNiMoTi , x Hexagon nut 8-A2B -- 6 x Clamping sleeve XCrNi18-8, 1.43 A2 9 x Gasket Pure graphite (CrNi laminated with graphite) Stud 25CrMo4, A Hexagon nuts C35E, A Bellows housing EN-GJS U-LT, EN-JS49 GP240GH+N, N GX5CrNiMo , Mounting bonnet EN-GJS U-LT, EN-JS49 GP240GH+N, N GX5CrNiMo , x Stem- / Bellows unit X20Cr13+QT, QT / X6CrNiTi18-, X6CrNiMoTi , Giude bushing X20Cr13+QT, QT (hardened) X6CrNiMoTi , Giude bushing X20Cr13+QT, QT (hardened) X6CrNiMoTi , x Gasket Pure graphite (CrNi laminated with graphite) 2007 Stud 25CrMo4, A Hexagon nuts C35E, A4 20 x Packing ring Pure graphite 2012 x Washer X5CrNi18-, x Coupling X8CrNiS18-9, Washer X5CrNi18-, Compression spring XCrNi18-8, V-ring unit PTFE 2024 Coupling X8CrNiS18-9, Scraper PTFE 2026 Gasket X6CrNiMoTi , x Plug X20Cr13+QT, QT X6CrNiMoTi , x Distance bush X5CrNi18-, x Stem adapter X20Cr13+QT, QT X6CrNiMoTi , x Stem adapter X20Cr13+QT, QT X6CrNiMoTi , x Plug X20Cr13+QT, QT X6CrNiMoTi , x Spindle X20Cr13+QT, QT X6CrNiMoTi , x Hexagon nut -- A4 61 Lock washer pair -- A4 Set: refer to Pos. 0 Stem sealings Fig x Packing ring Pure graphite 0 x V-ring unit (set) Set of: Pos x EPDM-sealing, cpl. EPDM / X20Cr13+QT, QT / X8CrNiS18-9, Spare parts Edition 08/13 - Data subject to alteration - Regularly updated data on 19
20 ARI-STEVI 450 / 451 (DN15-150) Sizing myvalve - Your Valve Sizing-Program. myvalve is a powerful software tool that not only helps you size your system components; it also gives you instant access to all other data about the selected product, such as order information, spare parts drawings, operating instructions, data sheets, etc., whenever you need it. Contents: Media: Module ARI-control valves STEVI-calculation - Sizing (calculation of flow quantity Kv, volume flow Q, pressure drop Δp, sound level and selecting the valve.) Integrated media-databank (more than media) with conditions: - Vapours / gases - Steam (saturated and superheated) - Liquids Special features: System Requirements: - Project administration of the calculation and product data incl. spare part drawings concerning to project and tag number. - Direct output or calculation and product data in PDF format. - Product data could be taken for a direct order. - SI- and ANSI-units with direct conversion to another databank. - Settings with over pressure or absolute pressure. - All ARI valves are integrated in a databank. - Direct access concerning to the product on data sheets, operating instructions, pressure-temperature-diagram and spare part drawings - Operation in company networks possible (no complex installations on individually PC s necessary). - Extensive catalogue extending over several product groups. Windows operating systems, Linux, etc. Technology for the Future. G E R M A N Q U A L I T Y V A L V E S ARI-Armaturen Albert Richter GmbH & Co. KG, D Schloß Holte-Stukenbrock, Tel / 994-0, Telefax / or 159 Internet: info.vertrieb@ari-armaturen.com 20 Edition 08/13 - Data subject to alteration - Regularly updated data on
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator
More informationARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 47 (DN5-50) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 47 Pneumatic actuator
More informationARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators
ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator
More informationARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationControl valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
More informationARI-STEVI 470 / ANSI (DN25-200)
ARI-STEVI 470 / 471 - ANSI (DN25-200) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem With pneumatic and electric actuators ARI-STEVI 470 / 471 - ANSI
More informationARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form
with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure
More informationwith electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationSTEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
More informationwith electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
More informationwith electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
More informationwith electric actuators Feedwater control valve with pump spill back DN
ARI-STEVI 453 with electric actuators Feedwater control valve with pump spill back DN 25-100 ARI-STEVI 453 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2G 2,2-15 kn Enclosure IP 65 2 torque switches
More informationSTEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
More informationARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
More informationARI-STEVI H / with electric actuators
Control valve in 3-way-/straightway form in compact-design for HVAC Applications - Fig. 491 / Fig. 492 Control valve in 3-way-/straightway form for HVAC Applications - Fig. 485/487 / Fig. 486/488 ARI-STEVI
More informationPN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN
with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2
More informationPressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
More informationARI-STEVI BBD 415 (DN25-50) Straight through blow down valve
With pneumatic actuator ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve ARI-STEVI BBD 415 Pneumatic actuator Required air supply pressure max. 6 bar Options: - Assembly of additional devices
More informationExcess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
More informationTemperature regulator Temperature regulator DN
Temperature regulator Temperature regulator DN 15-100 Fig. 771 ARI-TEMPTROL Thermal closing valve straight through with flanges Fig. 771 Fig. 772 Page 2 Fig. 773 ARI-TEMPTROL LCG Thermal closing valve
More informationARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.
More informationwith pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
More informationARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction
ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction ARI-FABA LA - Straight through with flanges EN ISO 15848-1 / TA - Luft TÜV-Test-No.
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationARI-Strainer PN63-160
ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +
More informationARI-ZETRIX ANSI. with worm gear. with electric rotary actuator Auma or Schiebel. with pneumatic actuator. with hydraulic actuator
Process valve - Fig. 016 - Double flanged process valve with metallic sealing - Triple offset - Fig. 018 - Fully lugged process valve with metallic sealing - Triple offset - Fig. 019 - Butt weld ended
More informationARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA - Luft TÜV-Test-No. 922-9204866 Grey cast iron
More informationARI-ZETRIX Process valve (gear-operated / actuated)
- Fig. 016 - Double flanged process valve with metallic sealing - Triple offset Process valve (gear-operated / actuated) with worm gear Self-locking With variable adjustment Page 4 Fig. 016 - gear with
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat
ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) (optional) Straight through with flanges TRB 801 Annex
More informationGrey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6
Bimetallic steam trap CONA B Bimetallic steam trap Bimetallic steam trap PN16 - with flanges (Fig. 600...1) - union with butt weld ends (Fig. 600...5) Grey cast iron Fig. 600 Page 2 Bimetallic steam trap
More informationGrey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4
Thermostatic steam trap CONA M Thermostatic steam trap Thermostatic steam trap PN16 - with flanges (Fig. 610...1) - union with butt weld ends (Fig. 610...5) Grey cast iron Fig. 610 Page 2 Thermostatic
More informationPN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges
Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through
More informationARI-FABA -Plus Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus - Straight through with flanges DIN DVGW-Type approval TA - Luft TÜV-Test-No. 973-10183778
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
More informationPage 6. Page 6. Page 6. Page 7. Page 8. Page 9. Page 10 / 11
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
More informationStrainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends
Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges German "TA-Luft" TÜV-Test-No. 922-9204866 TRB 801 No. 45 (except cast iron) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern
More informationARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges
ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Grey cast iron SG iron Cast steel Fig. 003/303 Page 2 Straight through with flanges Straight through with flanges Angle
More informationARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP32 ARI-DP33 Pneumatic actuator Page 2 DP-Actuator Extended stem on air failure ARI-DP34 Pneumatic
More informationARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
More informationCast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (except cast iron) ARI-STOBU Globe valve with flanges TRB 801 No.45 Test approvals
More informationCast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4
Check valve Straight through with flanges (except GG-25) Cast iron Nodular iron Cast steel BR 003/303 Page 2 Straight through with flanges Forged steel BR 003 Page 2 BR 003 Straight through with flanges
More informationARI-ZESA / ARI-GESA / THEA Butterfly valves
ARI-ZESA - Fig. 012 - Free of maintenance butterfly valve with elongated eyelets - soft sealed ARI-GESA - Fig. 013 - Free of maintenance butterfly valve with threaded eyelets - soft sealed / THEA Butterfly
More informationARI-STOBU PN16-40 Stuffing box valve
Stuffing box valve Stop valve with gland seal - metallic sealing Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA-Luft TÜV-Test-No. 922-9204866 Grey cast iron SG iron
More informationStop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C)
ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 Fig. 070 ARI-EURO-WEDI - Hood valve Fig.
More informationButterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
More informationCast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3
Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges TRB 801 No. 45 (except GG-25) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern with flanges TRB 801 No. 45 Stainless steel
More informationForged steel Stainless steel Fig. 610/612 (Y) Page 2. Forged steel Fig. 616 Page 6
Thermostatic steam trap CONA M ANSI Thermostatic steam trap Thermostatic steam trap ANSI150 / - with flanges (Fig. 610/612...1) - with screwed sockets (Fig. 610/612...2) - with socket weld ends (Fig. 610/612...3)
More informationForged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD Thermodynamic steam trap Thermodynamic steam trap PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3)
More informationHigh temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12
Bimetallic steam trap CONA B ANSI Bimetallic steam trap Bimetallic steam trap ANSI150 / - with flanges (Fig. 600/601...1) - with screwed sockets (Fig. 600/601...2) - with socket weld ends (Fig. 600/601...3)
More informationARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
More informationButterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
More informationForged steel Stainless steel Fig. 60A Page 2. Forged steel Stainless steel Fig. 61A Page 4. Forged steel Stainless steel Fig.
CONA All-in-one - Steam trap station with integrated inlet and outlet valves CONA All-in-one Steam trap station with integrated inlet and outlet valves CONA B All-in-one Bimetallic steam trap PN40 - with
More informationPneumatic process valve, Y-pattern with pneumatic actuator of stainless steel DN 15-50
with pneumatic actuator of staless steel Pneumatic process valve, Y-pattern with pneumatic actuator of staless steel DN 15-50 ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets Piston actuator
More informationGrey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8
Ball float steam trap CONA S Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationGrey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8
Ball float steam trap CONA S Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationCONA Further components / Accessories
CONA Further components / Accessories Liquid drainer PN16 / PN40 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends (Fig. 665...4)
More informationHigh temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12
Bimetallic steam trap CONA B ANSI Bimetallic steam trap Bimetallic steam trap ANSI150 / - with flanges (Fig. 600/601...1) - with screwed sockets (Fig. 600/601...2) - with socket weld ends (Fig. 600/601...3)
More informationForged steel Fig. 640/641 (Y) Page 6
Thermodynamic steam trap CONA TD ANSI Thermodynamic steam trap Thermodynamic steam trap ANSI150 / - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig.
More informationFloat-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel.
Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres Condensate pump No electricity required / float-operated PN 16 (82.691) Body: Jacket P235GH-TC, Bottom flanges
More informationARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing
ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges
More informationARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA
More informationGrey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2
CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationCONA -control Monitoring system for steam traps
CONA -control - Monitoring system for steam traps CONA -control Monitoring system for steam traps Central status indication External test chamber Bolt-on test chamber Inclusive: - AS-i-Master - Power supply
More information723 2-WAY CONTROL VALVES
Technical Manual Instructions for installation, operation and maintenance 723 2-WAY CONTROL VALVES Fig. 440-446, with electric actuator Ari-Premio Publication nr Supersedes TIB-723-GB-0613 TIB-723-GB-0711
More informationCast iron Nodular iron BR 006/306 Page 2. Cast steel BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (without GG-25) Cast iron Nodular iron BR 006/306 Page 2 ARI-STOBU Globe valve with
More informationCONA ANSI Further components / Accessories
CONA ANSI Further components / Accessories Liquid drainer ANSI150 / 300 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends
More informationSAFE - ANSI. Angle pattern safety valve 1 to 6 (DN 25 to 150) Safety valves ARI-SAFE-ANSI
SAFE - ANSI Safety valves Angle pattern safety valve 1 to 6 (DN 25 to 150) ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
More informationGrey cast iron SG iron Cast steel Forged steel High temperature steel Stainless steel Fig. 631 Page 2
Ball float steam trap CONA S ANSI Ball float steam trap Ball float steam trap ANSI125 / 150 / 300 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3)
More informationFig Page 2. Fig Page 10. Fig Page 14. Fig Page 16. Fig Page 20
SAFE Safety valves ARI-SAFE - Full lift- / Standard - safety valve ARI-SAFE Full lift safety valve D/G Standard safety valve F Type-test approved acc. to TRD and AD2000-A2 Direct loaded with spring: TÜV
More informationARI-PACO 2G 1,6 D/Y. Electric thrust actuator. Electric thrust actuator ARI-PACO 2G 1,6 D/Y. Electric thrust actuator. ARI-PACO 2G 1,6 D 1,6 kn
ARI-PACO 2G 1,6 D/Y Electric thrust actuator Electric thrust actuator ARI-PACO 2G 1,6 D/Y Electric thrust actuator ARI-PACO 2G 1,6 D 1,6 kn Input signal: 3-point Optional: Potentiometer Additional limit
More informationSAFE - ANSI / -TC / -TCP / -TCS
SAFE - ANSI / -TC / -TCP / -TCS Safety valves Angle pattern safety valve 1 to 6 ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
More informationSeries 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
More informationForged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4
Thermodynamic steam traps TRACO CONA TD Thermodynamic steam trap PN40 - with flanges (BR 640/641...1) - with screwed sockets (BR 640/641...2) - with socket weld ends (BR 640/641...3) - with butt weld ends
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationSeries 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator DIN version Application Mixing or diverting valves for heat transfer applications using organic media
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More information-ANSI. maintenance-free. Stop valve with bellows seal,
Stop valve with bellow seal -ANSI ARI-FABA Long Life - Stop valve with bellows seal, maintenance-free ARI-FABA -ANSI Long Life Class 150 with flanges TA-Air (zero emission) TÜV-Test-No. 088-945053 Cast
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN
More informationControl valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationType 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel
Type 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel Application Hand-operated actuator or side-mounted handwheel for mounting on control valves, especially Series 240, 250, 260 ), 280 and
More informationAWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63
TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel
More informationSeries V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
More informationBOA-CVP H. Type Series Booklet
Control Valve BOA-CVP H PN 16/25 DN 20-150 Type Series Booklet Legal information/copyright Type Series Booklet BOA-CVP H KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must
More information