Standard Hydraulic Cylinder range

18 e-mail: sales@interfluid.co.uk Standard Hydraulic Cylinder range

WELCOME / CONTENTS Welcome to the standard range of hydraulic cylinders. CATALOGUE / CONTENTS Welcome and catalogue contents page 1-2 This catalogue is designed to give a snapshot of the hydraulic cylinder range available from. It s purpose is to give an idea of standard cylinder dimensions & mounting options for the information of Original Equipment Manufacturers, machinery designers & hydraulic equipment users in general. Interfluid hydraulics Ltd are bespoke hydraulic cylinder manufacturers specialising in fast delivery, cost-effective hydraulic cylinder solutions in quantities from one-off to batch work. We produce cylinders from mm to 2mm bore, with a huge range of mounting options as standard, and the engineering capability to produce any cylinder configuration to suit the needs of the client. We can design for you, or work to your drawings and specifications. Welded Spherical Bearing Mounted Cylinders page 2-3 Threaded Spherical Bearing Mounted Cylinders page 3-4 Front Flange mounted Cylinders page 4-5 Rear Clevis Mounted cylinders page 5-6 Rear Pin Mounted cylinders page 6-7 Forked Clevis mounted Cylinders page 7-8 Alternative Mountings & hydraulic cylinder forces table page 8-9 Our standard range of cylinders has a working pressure of 210 bar. Also available is our Heavy Duty range, rated to work at 3 bar, designed to operate in the most arduous of conditions. Cylinders can be fitted with a range of electronic position sensing devices, from simple proximity sensors signalling extremities of stroke, to internally fitted infinite resolution linear transducers with a variety of output options. Please feel free to download this catalogue and incorporate our cylinder designs into your machinery. If you do not see exactly what you are looking for please do not hesitate to contact us, our design team are always on hand to assist you in any way possible.

WELDED SPHERICAL BEARING MOUNTED CYLINDERS A range of cylinders mounted on self-aligning spherical bearings, welded to the rear of the cylinder body and rod-end. Suitable for cylinders with Carbon Steel rod material. These cylinders are made to order on short lead times and can be manufactured up to 5m stroke (customer to specify stroke length). Bore DIA Rod DIA A B C D E F G H I K 6 22 38 16 38 1/4 BSP 28 19 Closed centres = Dimension A + Stroke 2 22 45 45 3/8 BSP 28 23 43 E H Ref K B C 261 22 51 22 51 3/8 BSP 32 28 261 22 51 22 51 73 3/8 BSP 32 28 ØF 9 51 22 51 3/8 BSP 32 28 D 2 61 61 95 1/2 BSP 1 28 69 28 69 115 1/2 BSP 82 Test pressure 0 bar unless otherwise stated. Rod material: Standard Grade EN8 DIN UNI CK45, Hard Chrome Plated, minimum microns Alternative rod materials available: Chrome plated Stainless Steel grades 431S29T / 316 / 4; NIKROM 3. Headbush material: Cast Iron - UNI07 G unless otherwise stated. Bore diameters available from mm to 2mm. 3 bar Heavy Duty range of cylinders and alternative rod and bore combinations available..

THREADED SPHERICAL BEARING MOUNTED CYLINDERS A range of cylinders mounted on self-aligning spherical bearings, welded to the rear of the cylinder body, threaded at the rod-end. Suitable for cylinders with Carbon Steel and Stainless Steel rod material. These cylinders are made to order on short lead times and can be manufactured up to 5m stroke, (customer to specify stroke length). Closed centres = Dimension A + Stroke Bore DIA Rod DIA A B C D E F G H I K 216 19 38 1/4 BSP 28 19 2 22 23 45 3/8 BSP 28 23 43 E H Ref K B C 273 28 51 3/8 BSP 32 28 273 28 51 73 3/8 BSP 32 28 ØF 273 28 51 3/8 BSP 32 28 D 321 61 95 1/2 BSP 379 85 69 115 1/2 BSP 82 Pop out feature box, key info point could go here? Test pressure 0 bar unless otherwise stated. Rod material: Standard Grade EN8 DIN UNI CK45, Hard Chrome Plated, minimum microns Alternative rod materials available: Chrome plated Stainless Steel grades 431S29T / 316 / 4; NIKROM 3. Headbush material: Cast Iron - UNI07 G unless otherwise stated. Bore diameters available from mm to 2mm. 3 bar Heavy Duty range of cylinders and alternative rod and bore combinations available.

FRONT FLANGE MOUNTED CYLINDERS A range of cylinders mounted on a circular front ange, with a male threaded rod-end. These cylinders are made to order on short lead times and can be manufactured up to 5m stroke (customer to specify stroke length). Bespoke flanges can be manufactured and mounted to custom specifications. Bore DIA Rod DIA A B C D E F G H I K 108 M16X1.5 109 1/4 BSP 11 87 12.5 Body length = Dimension A + Stroke K B C PCD I 118 M16X1.5 MX1.5 MX1.5 137 M24X2.0 M27X2.0 128 3/8 BSP 13 105 14.5 43 142 3/8 BSP 13 117 16.5 ØF Thread D ØE MX1.5 137 M24X2.0 M27X2.0 142 73 3/8 BSP 13 117 16.5 ØH 143 M24X2.0 M27X2.0 162 3/8 BSP 15 127 16.5 Front Flange - bore 4 holes ØH on PCD I Front Flange - bore 6 holes ØH on PCD I 1 45 M33X2.0 M27X2.0 187 45 M33X2.0 192 M39X3.0 M27X2.0 181 95 1/2 BSP 17 149 18.5 194 115 1/2 BSP 17 162 24.5 82 Test pressure 0 bar unless otherwise stated. Rod material: Standard Grade EN8 DIN UNI CK45, Hard Chrome Plated, minimum microns. Alternative rod materials available: Chrome plated Stainless Steel grades 431S29T / 316 / 4; NIKROM 3. Headbush material: Cast Iron - UNI07 G unless otherwise stated. Bore diameters available from mm to 2mm. 3 bar Heavy Duty range of cylinders and alternative rod and bore combinations available. Bespoke manufacturing options are always available, call or email for further details..

REAR CLEVIS MOUNTED CYLINDERS A range of cylinders mounted on a welded rear male clevis (sometimes called a Pad-eye), with a male threaded rod-end. These cylinders are made to order on short lead times and can be manufactured up to 5m stroke (customer to specify stroke length). Bore DIA Rod DIA A B C D E F G H I K 158 M16X1.5 1/4 BSP 28 16. Closed length = Dimension A + Stroke 178 M16X1.5 MX1.5 3/8 BSP. 43 E H ref K B C MX1.5 2 M24X2.0 M27X2.0 3/8 BSP 32. MX1.5 2 M24X2.0 M27X2.0 73 3/8 BSP 32. Thread D 7 M24X2.0 M27X2.0 3/8 BSP. ØF 2 M27X2.0 45 M33X2.0 267 M27X2.0 2 45 M33X2.0 M39X2.0 45 95 1/2 BSP 38. 55 115 1/2 BSP 38. 82 Test pressure 0 bar unless otherwise stated. Rod material: Standard Grade EN8 DIN UNI CK45, Hard Chrome Plated, minimum microns. Alternative rod materials available: Chrome plated Stainless Steel grades 431S29T / 316 / 4; NIKROM 3 Headbush material: Cast Iron - UNI07 G unless otherwise stated. Bore diameters available from mm to 2mm. 3 bar Heavy Duty range of cylinders and alternative rod and bore combinations available.

REAR PIN MOUNTED CYLINDERS A range of cylinders mounted on a simple pin hole to the rear, with a male threaded rod-end. These cylinders are made to order on short lead times and can be manufactured up to 5m stroke (customer to specify stroke length). Bore DIA Rod DIA A B C D E F G H I K 143 M16X1.5 15 1/4 BSP 16. Closed length = Dimension A + Stroke 1 M16X1.5 MX1.5 3/8 BSP 45. 43 K E H ref B C MX1.5 182.5 M24X2.0 M27X2.0 22.5 3/8 BSP 48. MX1.5 182.5 M24X2.0 M27X2.0 22.5 3/8 BSP 48. Thread D 187.5 M24X2.0 M27X2.0 22.5 3/8 BSP 48. 213 M27X2.0 45 M33X2.0 M27X2.0 245 45 M33X2.0 2 M39X2.0 95 1/2 BSP 55. 115 1/2 BSP 65. 82 Test pressure 0 bar unless otherwise stated. Rod material: Standard Grade EN8 DIN UNI CK45, Hard Chrome Plated, minimum microns. Alternative rod materials available: Chrome plated Stainless Steel grades 431S29T / 316 / 4; NIKROM 3. Headbush material: Cast Iron - UNI07 G unless otherwise stated. Bore diameters available from mm to 2mm. 3 bar Heavy Duty range of cylinders and alternative rod and bore combinations available.

FORKED CLEVIS MOUNTED CYLINDERS A range of cylinders mounted on forked clevises, welded to the rear, threaded at the rod-end. These cylinders are made to order on short lead times and can be manufactured up to 5m stroke (customer to specify stroke length). Bore DIA R o d DIA A B C D E F G H I K L M 1 39 16 34 1/4 BSP 28 16.2 24 16 Closed centres = Dimension A + Stroke 2 22 45 3/8 BSP 28. 43 M E H ref K B C L L M 7 45 3/8 BSP 32. 7 45 73 3/8 BSP 32. 282 65 3/8 BSP 32. D 3 75 55 95 1/2 BSP. 5 75 55 115 1/2 BSP. 82 Test pressure 0 bar unless otherwise stated. Rod material: Standard Grade EN8 DIN UNI CK45, Hard Chrome Plated, minimum microns. Alternative rod materials available: Chrome plated Stainless Steel grades 431S29T / 316 / 4; NIKROM 3. Headbush material: Cast Iron - UNI07 G unless otherwise stated. Bore diameters available from mm to 2mm. 3 bar Heavy Duty range of cylinders and alternative rod and bore combinations available.

BESPOKE CYLINDER MANUFACTURING HYDRAULIC CYLINDER FORCES TABLE With our many years of experience in cylinder design and manufacture, and extensive engineering facilities, we can produce cylinders to individual designs, from one-offs to large batches. Bore DIA Rod DIA Extension Force kg @1 Bar @1 Bar @210 Bar Retraction Force kg @1 Bar @1 Bar @210 Bar We specialise in fast turn-around, cost effective cylinder solutions to O.E.M. Manufacturing, Offshore, Marine & Agricultural industries, amongst many others. Our design work is done in Solidworks & AutoCAD, and we have the ability to send and accept drawings in most electronic formats. 1761 2138 2641 13 13 1981 1761 2138 2641 1073 13 19 2751 3341 4127 95 2751 3341 4127 1761 2138 2641 2751 3341 4127 13 14 2105 3961 4810 5942 2971 38 4457 3961 4810 5942 2613 3173 39 3961 4810 5942 21 2672 31 4367 53 6551 19 3667 4529 4367 53 6551 27 3165 3910 4367 53 6551 1616 19 24 5392 6547 88 44 4911 66 5392 6547 88 31 49 5447 5392 6547 88 2641 37 3961 43 8552 10564 5282 6414 7923 TO EST, SITATUR AUT ET AS ETUR SIT ACIPSA PERUM ENIM QUIS PLIT, SI REHENIS ET, UT EUM ALIQUO ET LAB ID UN- TOTA NE 43 8552 10564 4292 5211 6437 43 8552 10564 81 3741 4622 14 13362 166 9243 11224 13865 14 13362 166 83 22 123 14 13362 166 43 8552 10564 14 13362 166 5612 6815 8418