Electric Pontoon Legs This innovative lifting system enables pontoon boats to literally stand on their own four feet using nothing more than the power from a 12 volt battery. Whenever you pull into shore, on any type of bottom, you can raise your boat clear of the water in seconds with the touch of a button. Like conventional Hewitt Lifts, this made-to-go system helps protect your pontoon from the damaging effects of waves and water for longer service life and higher resale value. Hewitt Electric Pontoon Legs are constructed from high-grade structural aluminum and solidly bolted to the frame members of your pontoon boat. The complete system adds only 385 lbs and has a load capacity of 6000 lbs. Maximum lift height is typically 5-1/2 from the bottom of the legs to top of the boat deck or 3-1/2 to the bottom of the pontoons. Standard Features All-electronic lifting mechanism. A powerful 12 volt DC motor coupled to an acme screw and nut is used to drive each heavy-duty frame leg module. This design provides a positive self-locking lift at any height. 4-way and independent position control. Allows quick extension and retraction of all four legs plus individual adjustment of any leg to easily level your boat. Low profile design. Legs extend less than 6-1/2 below deck in their stowed position. Will not interfere with trailering or normal operation. Large 11-1/2 x 22-1/2 tubular feet evenly distribute weight over a large area for solid footing on hard or soft bottoms. Feet pivot independently for added stability on rocky or uneven terrain. Electronic Control Module The command center is fully sealed for protection against water and vibration. It s designed to mount directly above the transom to simplify installation and conserve valuable storage space. Compatible with any style of pontoon trailer Independent leg height adjustment and pivoting feet
Onboard Pendant Control The four leg modules can be operated in unison with the push of a single button or independently controlled with separate buttons for leveling your boat on uneven bottoms. Works with most makes and models Hewitt Electric Pontoon Legs can be installed on virtually any twin tube pontoon boat and most tri-toon models with at least 12 of space between the pontoons. Wireless Remote Control A waterproof, key fob style control is included with every system. Raise and lower your boat from the convenience of your dock or shore. Quietly raise and lower pontoon legs with a touch of a button
Hydraulic Pontoon Legs Hewitt Hydraulic Pontoon Legs are available in three models to best match the size, style and operating conditions of your pontoon boat. Like the Hewitt electric system, these models help preserve the appearance and value of your pontoon, eliminate the need to tie off your boat and free up space at your dock. Enjoy the convenience of push-button operation and the flexibility of a built-in lift that travels with your pontoon. Built to last longer and stand taller Hydraulic cylinders are the muscles of any fluid power system. Hewitt Hydraulic Pontoon Legs use 2 cylinders which are 20% stronger than those of competitors. The rest of the supporting structure, including mounting brackets, legs and feet, are made from structural aluminum which offers a high strength-to-weight ratio and natural corrosion resistance. Hewitt Hydraulic Legs are also well suited to deeper water applications. At maximum leg extension, the top of the boat s deck is approximately 6 above the bottom of the supporting feet. Designed to work with your boat There is a Hewitt Hydraulic model for virtually every pontoon boat. Leg assemblies are solidly bolted to the existing frame members of your pontoon boat and will not interfere with trailering or normal operation. In the retracted position, legs extend less than 6-1/2 below the deck. Boats can be transported with scissor or bunk style trailers. The Standard model only adds 375 lbs to your boat and has a load capacity of 4000 lbs. Straight Leg and Wide-Base models have a 6000 lb capacity and weigh 425 lbs. Wireless Remote Control Pendant Hewitt Hydraulic Legs are operated with a user-friendly four switch control. Front and rear legs can be raised or lowered independently. LifTrack, a unique LED arc-of-travel indicator, shows the exact position of the legs during extension and retraction. The pendant is compact and durable. A waterproof, key fob style control is included with every system. Raise and lower your boat from the convenience of your dock or shore. Standard Features Wireless remote control and hard-wired onboard control with LifTrack. 32 long self-adjusting feet. Feet pivot independently of the legs to compensate for uneven terrain. The large tubular design evenly distributes the pontoon s weight for excellent stability, even on soft bottoms. 12 volt DC powered hydraulic pumps. Environmentally friendly, biodegradeable hydraulic fluid. Will not harm lakes or wildlife if spilled. Leg assemblies in stowed position 2 Cylinders are 20% stronger than competitors Single hydraulic pumps for Standard Hydraulic Legs Dual synchronized hydraulic pumps for Straight Leg and Wide-Base Legs
Standard Hydraulic Legs The standard model is an economical choice for smaller boats with twin pontoons. The front and rear sets of legs are tied together and operate in tandem. Each set of legs is powered by a separate hydraulic pump and can be raised or lowered independently to level your boat. Leg assemblies are constructed from rugged 4 square tubing. Hydraulic Straight Legs This model can be used with either twin or triple pontoon boats and uses heavy-duty 6 diameter aluminum tubing for superior strength and greater load carrying capacity. This model features dual synchronized hydraulic pumps front and rear. Each leg is connected to its own pump, providing faster extension and retraction. Front and rear legs can be operated separately to level your boat. Hydraulic Wide-Base Legs Wide-Base and Straight Leg models are identical with one exception. Specially designed angled mounting brackets give these legs the widest base of any onboard lift available today 72! That s 24 wider than the nearest competition. This extra width and stability is ideal for twin or triple pontoon boat owners who live or travel in areas of strong winds and rough water. An onboard lift for virtually any pontoon boat twin-toon, tri-toon, 18 to 28 ft.
Canopies Functionality and great appearance. Hewitt Pontoon Legs protect your boat from the bottom up. Our free-standing canopies protect it from the top down. All-aluminum frames and a great choice of colors. A free-standing canopy system to protect your Pontoon Legs equipped pontoon Exposure to sun, wind and driving rain can ruin your pontoon from the inside out. Cracking, fading and peeling not only takes away from the look, comfort and function of your pontoon, it reduces the value. Hewitt custom-designed canopies provide years of beautiful, maintenance-free protection. Canopies are available in 120 or 138 widths and a wide variety of lengths. Choose from three styles: standard, tower or peak roof frame with vinyl or SeaMark fabric covering. Features Free-standing frame made from large, 3 square aluminum tubing. Cross braced design allows the entire canopy and frame to be moved in one piece if needed. Screw-in anchoring posts included. Canopy frame top with cross bows positioned every two feet. Quick-release center support straps keep cover from billowing in the wind. Have a special Tension cords keep covering taut and simplify installation and removal. canopy need? Just Heat-welded seams prevent thread rot and water infiltration. contact your dealer. Canopy length can be extended at any time for little additional cost. Four canopy extensions allow easy adjustment for different boat heights. Screw-in Anchor Tension Cords Standard Vinyl Canopy Colors Our 16 oz nylon reinforced vinyl canopies are UV resistant to prevent premature fading. Choose from 7 popular colors. SeaMark Standard Colors This 16 oz marine fabric is made from combining Sunbrella fabric with a textured marine grade vinyl. SeaMark fabric has a fluorocarbon finish which makes it UV, water, mildew and fade resistant. Choose from 7 popular colors. Grey Beige Blue White Black Burgundy Cadet Pacific Green Yellow Teal Navy Forest LinenTweed
Accessories Hewitt offers an extensive line of accessories designed to aid installation, simplify use and provide additional protection for your boat. Accessories are also available to satisfy the specific needs of certain types of craft and varying lake or river conditions. Standard Canopy This economical design offers rounded sides and end caps for a smooth wrap appearance with no hard edges. Canopy Bracing Recommended on 29 ft canopies and longer. Peak Roof Canopy The steep pitch of a Peak Roof Canopy rapidly sheds water. Its higher profile and clean lines accentuate the color of your canopy. Catwalk Brackets All aluminum brackets with mounting hardware to make side mounted catwalk for your free standing canopy. (Planks not included) Wheel Kit Mounts on center of free standing canopy. Works great for maneuvering around objects or over sea walls. Under-Canopy Storage Net Make the most of available space. This convenient storage net easily attaches to the canopy frame, providing quick access to supplies and recreational gear. Weight capacity approximately 75 lbs. Tower Canopy The arched canopy provides greater vertical clearance, allowing boat towers and bimini tops to remain in the upright position for storage. Post Ratchet Provides leverage to easily install and remove screw-in anchors. 36 Plastic Bumper Durable plastic bumper with recessed holes, mounts to uprights. Lift Jack Use to raise one end of the canopy to install or remove wheels.
Specifications Height With Recommended Min. Width Between Pontoons Min. Width Between Total Lift Height From Max. Transom Length From First Full Model Legs Retracted Capacity Boat Lengths Weight For Triple Toon Installation Pontoons For Twin Tubes Bottom To Deck Top Cross Member On Rear Of Boat Electric 6-1/2 6000 lbs 19 to 26 385 12-66 - Standard 5-1/2 4000 lbs 18 to 22 375 N/A 48-1/2 72 61 Straight 6-1/2 6000 lbs 18 to 28 425 8-1/2-72 - Wide Base 6-1/2 6000 lbs 18 to 28 425 10-1/2-72 - We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry s finest. For over 35 years, boat and watercraft owners have trusted the safety and longevity of their investments to Hewitt Lifts, docks, and canopies. LIMITED WARRANTY New HEWITT-built pontoon legs carry a 2 year conditional warranty on all aluminum and aluminum welds. New Hewitt built free-standing canopies and accessories carry a 15 year conditional warranty on all aluminum and aluminum welds. A 5 year conditional warranty on vinyl and SeaMark canvases, excluding fading. HEWITT Machine and Manufacturing, Inc. further warrants all other parts used on HEWITT-built lifts and accessories, purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer s warranty, wherein that warranty will apply.) Warranty is void when misuse or neglect is the cause. Specifications are subject to change without notice. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER. No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED. In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty. The customer s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law. Unless otherwise noted this warranty agreement is the only warranty agreement between the parties. This agreement states the limits and association of risk between the two parties. Customer acknowledges understanding of this warranty and agreement and binding to the terms contained within. OTHER MANUFACTURER S WARRANTIES Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold as is, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc. s knowledge the following warranties are provided by other manufacturers: Hydraulic pumps and hoses carry a manufacturer s 2 year warranty. Hydraulic cylinders carry a manufacturer s 1 year warranty. Electrical parts carry a manufacturer s 1 year warranty. Specifications are subject to change without notice. Installation of pontoon legs may require minor modifications to your boat. Protected by one or more of the following U.S. Patents: 6,907,835; 6,983,707; 7,051,665; 12,407,096; 61,037,711; 61,037,712. Other patents pending. Pontoon Legs is a registered trademark and LifTrack is a trademark of Hewitt Machine and Manufacturing, Inc. HEWITT MACHINE AND MANUFACTURING INC. 709 Hwy 14 West, Nicollet, MN 56074 Weekdays, 8:00 am to 4:30 pm CST Ph: 507.225.3421 or 800.544.2067 Fax: 507.225.3053 www.hewitt-roll-a-dock.com Email: info@hewitt-roll-a-dock.com www.pontoonlegs.com PRINTED IN THE USA