1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 2 2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 3 3. WDW Series Microcomputer Control Electronic Universal Testing Machine (floor type)... 4 4. WDW-S Series Liquid Crystal Electronic Universal (Tensile) Testing Machine(two-column structure double spaces)... 5 5. WDW-S Series Liquid Crystal Electronic Universal (Tensile) Testing Machine (single arm with standard configuration)... 6 6. WES Series Electro-hydraulic (digital display) universal testing machine... 7 7. WEW Series Electro-hydraulic (screen display) universal testing machine... 8 8. WAW Series Electro-hydraulic Servo Universal Testing Machine... 9 9. Geotextile (geogrid) Testing Machine... 10 10. Electronic Thermal Insulating Material Testing Machine... 11 11.WDW-Y Series Electronic Compression Testing Machine... 12 12.MWD Series Wood-based Panel Universal Testing Machine... 13
1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine Functions and features: The machine can accurately test mechanical property of various materials according to relative standard or user requirements, and manipulate with data statistic and judgment, and output test report and test curves. It can realize three closed-loop controls for constant speed displacement, constant speed load and constant speed stress, with good control performance, high precision, strong anti-interference capability, high reliability. Adopting imported load sensor, full digital AC servo motor, gapless precision ball screw, the precision machining components and portal structure with two test spaces to ensure the high rigidity and high axiality. Highly integrated control software, applicable to different customers requirements for various materials. Type and spec. WDW-1/2/5/10 WDW-20 WDW-30/50 WDW-100 WDW-200/300 Max load (KN) 1/2/5/10 20 30/50 100 200/300 Effective 1%-100%FS measuring range Load resolution 1/±300000 Precision of ±1% indicating value Max tensile 650mm or can be made as required distance Max. space 700 or can be made as required between upper and lower platens (mm) Adjusting range of 0.05~500mm/min displacement rate Control precision Within ±0.2% of the set value of displacement rate Accessory An option of standard accessories for tension, compression, bending, shearing, peeling, tearing or special grips Power supply 220V±10% 50Hz 380V±10% 50Hz Dimension of the 660X415X1500 740X450X1600 755X520X1780 850X555X1900 1050X750X2600 main machine (L*W*H)mm
2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine This series machine comply with standard GB/T16491-2008 and JJG139-1999; and also accord with standard GB, ISO, ASTM, JIS about material requirements. It can accurately test mechanical property of various materials according to relative standard or user requirements, and manipulate with data statistic and judgment, and output test report and test curves. Adopting advanced control technology in the world and can completely realize three closed-loop control for constant speed displacement, constant speed load and constant speed stress, with good control performance, high precision, strong anti-interference capability, high reliability. Adopting imported load sensor, full digital AC servo motor, gapless precision ball screw, the precision machining components and portal structure with two test spaces to ensure the high rigidity and high axiality. Highly integrated control software, applicable to different customers requirements for various materials. Model and spec. WDW-01/02/05 WDW-1 WDW-2 WDW-5 Max load (N) 100/200/500 1000 2000 5000 Effective measuring range 1%-100%FS Load resolution 1/±300000 Precision of indicating value ±1% Max tensile distance (mm) Max space between upper and lower platens 800mm or can be made as required 700mm or can be made as required
3. WDW Series Microcomputer Control Electronic Universal Testing Machine (floor type) This series machine comply with standard GB/T16491-2008 and JJG139-1999; also accord with standard GB, ISO, ASTM, JIS about material requirements. It can accurately test mechanical property of various materials according to relative standard or user requirements, and manipulate with data statistic and judgment, and output test report and test curves. Adopting advanced control technology in the world and can completely realize three closed-loop control for constant speed displacement, constant speed load and constant speed stress, with good control performance, high precision, strong anti-interference capability, high reliability. Adopting imported load sensor, full digital AC servo motor, gapless precision ball screw, the precision machining components and single arm structure with two test spaces to ensure the high rigidity and high axiality. Highly integrated control software, applicable to different customers requirements for various materials. Model and spec WDW-50 WDW-100 Max load 50KN 100KN Grade Grade 1 Measuring range Relative error of indicating value ±1% Resolution of testing value 1%-100%FS 1/±300000F.S Measuring range of deformation 0.2%-100% Adjusting range of load control Adjusting range of displacement rate Control precision of displacement rate 0.005%-5%FS/S 0.005~500mm/min Within ±0.2% of the set value Effective test span 610mm 550mm Effective tensile test space 0-600mm 600 Effective compression test space 0-1000mm 800 Load mode Voltage(should be connected to the ground) Power of the machine Dimension of main machine(l*w*h) Electrically 220V±10% 50Hz 1500w 1080mm*610mm*2320mm(including foundation)
4. WDW-S Series Liquid Crystal Electronic Universal (Tensile) Testing Machine(two-column structure double spaces) These series machines can accurately measure the tensile strength, elongation, compression strength of various kinds of materials. Adopting load sensor, full digital AC servo motor, gapless precision ball screw, the precision machining components and two-column structure with two test spaces to ensure the high rigidity and high axiality. Microcomputer control and data acquisition system realize full-digitalization adjustment to data acquisition and control process. It can display max. load, tensile strength, extension deformation, elongation etc and save the test data automatically. If equipped with printer, it can print test results. This series machine is applicable to metal, cementing compound, tubes and pipes, sectional bar, aviation, petrochemical industry, water-proof rolls, wire and cable, textile, fiber, rubber, ceramics, food, medical packaging, geotextile, film, wood, paper and other manufacturing industries and quality inspection departments, also applicable to colleges for demonstration. main specifications: Type and spec WDW-S1/2/5/10 WDW-S20 WDW-S30/50 WDW-S100 WDW-S200 Max load (KN) 1/2/5/10 20 30/50 100 200 Effective measuring 2%-100%FS range Resolution of test 1/±200000 force Precision of indicating ±1% value Max. tensile distance 800mm or can be made as required Max. space between 700 or can be made as required upper and lower platens (mm) Accessory An option of standard accessories for tension, compression, bending, shearing, peeling, tearing or special grips Power supply 220V±10% 50Hz 380V±10% 50Hz Dimension of main 660 415 1500 740 450 1600 755 520 1780 850 555 1900 1050 750 2600 machine(l*w*h)mm
5. WDW-S Series Liquid Crystal Electronic Universal (Tensile) Testing Machine (single arm with standard configuration) This series machine comply with standard GB/T16491-2009 and JJG139-1999, and also meets standard GB, ISO, ASTM, JIS about material requirements. And they can test mechanical properties such as strength, elongation, compression strength etc. Adopting load sensor, full digital AC servo motor, gapless precision ball screw, the precision machining components and single arm structure with two test spaces to ensure the high rigidity and high axiality. Microcomputer control and data acquisition system realize full-digitalization adjustment to data acquisition and control process. It can display max. load, tensile strength, extension deformation, elongation etc and save the test data automatically. If equipped with printer, it can print test results. This series machine is applicable to metal, cementing compound, tubes and pipes, sectional bar, aviation, petrochemical industry, water-proof rolls, wire and cable, textile, fiber, rubber, ceramics, food, medical packaging, geotextile, film, wood, paper and other manufacturing industries and quality inspection departments, also applicable to colleges for demonstration. main specifications: Type and spec WDW-S01/02/02 WDW-S1 WDW-S2 WDW-S5 Max load (KN) 100/200/500 1000 2000 5000 Effective measuring range 2%-100%FS Load resolution 1/±200000FS Precision of indicating value ±1% Max. tensile distance (mm) 800 or can be made as required Max. space between upper 700 or can be made as required and lower platens (mm) Accessory An option of standard accessories for tension, compression, bending, shearing, peeling, tearing or special grips Power supply 220V±10% 50Hz Dimension of the main 660 415 1500 machine(l*w*h)mm
6. WES Series Electro-hydraulic (digital display) universal testing machine Using underneath type oil cylinder, manual control by oil inlet and outlet valves, electronic measurement, LCD display load, test curves, tensile strength, yield points and other performance parameters; auto processing test data, test result print, mainly used to perform tension, compression, bending and other mechanical property tests for metallic and nonmetallic materials. Attached with accessories, it can perform tests for high strength bolt, chain, steel wire rope and other materials. It completely complies with national standard GB/T16826-2008, JJF1103-2008 and GB/T228-2008 and also accord with standards ISO, ASTM and JIS about material requirements. Model and spec WES-300B/D WES-600B/D WES-1000D Max load (KN) 300 600 1000 Effective measuring range 4%-100%FS Precision ±1% Data processing and Display and print test results through LCD controller display mode Max. distance between 550 550 600 tensile jaws (mm) Max. space between upper 450 450 450 and lower platens (mm) Size of upper and lower Ø160mm platens(mm) Clamping range of round Ø 6-13; Ø13~ 26 Ø 13-26: Ø 26~ 40 Ø 13-26: Ø 26~ 40 specimen (mm) Clamping range of flat 0 ~ 15 0-15;15-30 0-15;15-30 specimen (mm) Max. clamping width of flat 70 specimen (mm) Dimension of main 740 550 2100 740 580 2100 890 670 2250 machine (mm)(not including stroke of piston) Dimension of control cabinet(mm) 560 450 1200 560 450 1200 560 450 1200 Note: type B : level type manual clamping specimen mode; type D: hydraulic auto clamping specimen mode.
7. WEW Series Electro-hydraulic (screen display) universal testing machine Using manual control delivery and return oil valve, hydraulic loading, electronic measurement force, test data acquisition and processing by computer, mainly used to perform tension, compression and bending tests for metallic and nonmetallic materials. If equipped with accessories, it can perform mechanical property tests for high strength bolt, chain, steel wire rope and other materials. Equipped with Windows special software for hydraulic universal testing machine, can complete testing parameters setting, test data and curves acquisition, processing, analysis (test data including: elastic modulus E, tensile strength Rm, upper and lower yield points ReH, ReL etc.), and manipulate with data statistics and output. This series machine comply with standard GB/T16826-2008 GB/T228-2008 and JJG139-1999, and also satisfy with standard ISO, ASTM, JIS about materials requirements. Model and spec WEW-300B/D WEW-600B/D WEW-1000D Max load 300 600 1000 Effective measuring range 2%-100%FS Precision ±1% Data processing and display mode Computer processing the data, test results and the test results and test curves can be saved and printed Max. distance between tensile jaws 550mm 550mm 600mm Max. space between upper and lower 450mm 450mm 450mm platens Size of upper and lower platens Ø160mm Ø160mm Ø160mm Clamping range of round specimen φ 13-26;φ26~ 40 φ 13-26:φ26~ 40 φ 13-26:φ26~ 40 (mm) Clamping range of flat specimen(mm) 0-15 0-15;15-30 0-15;15-30 Clamping range of flat specimen (mm) 70 70 70 Dimension of main machine (mm) 740 550 2050 740 580 2100 890 670 2150 Dimension of control cabinet(mm) 1080 600 960 1080 600 960 1080 600 960 Note: type B : level type manual clamping specimen mode; type D: hydraulic auto clamping specimen mode.
8. WAW Series Electro-hydraulic Servo Universal Testing Machine Using full-digital broadband electro-hydraulic servo valve to drive precise hydraulic cylinder, and to complete three closed-loop control to load, displacement, deformation, mainly perform tension, compression, bending tests for metallic materials, complied with standard GB/T16828-2008, JJF1103-2003, GB/T228-2008 and JJG139-1999, also satisfied with standard ISO, ASTM, JIS about material requirements. Using transmission mechanism with double screws middle cross beam, underneath type oil cylinder, full-wide jaw base, good rigidity, easy to clamp specimen; loading part adopts microcomputer control high precision full-digital servo valve, high control precision, fast response. Test control mode: manual open-loop control and computer closed-loop control, can realize auto control test, data acquisition and judgment (test data include: elastic modulus E,tensile strength Rm, upper and lower yield points ReH,ReL etc.),which makes procedure control and data acquisition processing more accurate. Model and spec WAW-300D/B WAW-600D/B WAW-1000D max. load(kn) 300 600 1000 Effective measuring range(kn) 2%-100%FS precision of indicating value ±1% Control mode Computer and three closed loop control of displacement, stress and strain Max. distance between tensile jaws (mm) 550 550 650 Max. space between upper and lower 450 450 500 platens (mm) Size of upper and lower platens(mm) Ø160mm Ø160mm Ø160mm Clamping range of round specimen (mm) Ф6-13; Ф13-26 Ф13-26;Ф26~ 40 Ф13-26;Ф26~ 40 Clamping range of flat specimen (mm) 0-15 0-15;15-30 0-15;15-30 Max. clamping width of flat specimen 70 70 70 (mm) Dimension of main machine(mm) 740 550 2050 740 580 2100 890 670 2150 Dimension of control cabinet(mm) 1100 700 940 1100 700 940 1100 700 940 Note: type B : level type manual clamping specimen mode; type D: hydraulic auto clamping specimen mode.
9. Geotextile (geogrid) Testing Machine Applicable scope and features: This series machine comply with standard GB/T16491-2008 JJG139-1999, equipped with special grips for geotextile and special software. The machines can perform the tensile, pierced, bursting and tearing test to geotextile. Precise auto control and data acquisition system realize full-digitalization to data acquisition and control procedure. During compression test, it can test such technical indexes as bearing capacity, strength, elongation etc. All the tested parameters can be calculated automatically according to the conditions set before the test by the controller and in the meantime display the test results. The test parameters can be enquired and printed after the test. Technical parameters Max Load 5KN/10KN 20KN 30KN/50KN 100KN Precision grade Grade 1 Measuring range of test 1%-100%FS force Relative error of indicating ±1% value Resolution of test force 1/300000 Adjusting range of speed of 0.005-500mm/min displacement Effective test span 400mm 50mm Effective tensile space 800mm Effective compression 700mm space Loading mode Electrically loading Power supply( should 220V±10%,50Hz connect to the ground) Dimension(L*W*H)mm 660*415*1500 740*450*1600 755*520*1780 850*555*1900
10. Electronic Thermal Insulating Material Testing Machine These series machines adopt computer or large LCD auto control and data acquisition system and realize full-digitalization adjustment to data acquisition and control procedure. Use servo motor and precise ball screw without clearance to load, stably and reliably. It can display max. load,tensile strength,extension strain, elongation and other technical indexes. It is mainly used to perform compression, tension, bond strength, bending strength and other mechanical tests for thermal insulating mortar, fiberglass mesh, thermal insulating plates, etc. Model and spec. WDW-10 WDW-20 WDW-30 /50 Max. load(n) 10000 20000 30000 /50000 Displacement resolution 0.01mm Effective measuring range 1%-100%FS Precision of indicating value Better than indicating value ±1% Adjusting range of test speed 0.05-500mm/min accessory Complete set of accessories of tension, compression, shearing for thermal insulating plate, mortal, fiberglass mesh and other thermal insulating materials. control mode Microcomputer LCD control or computer control (optional)
11.WDW-Y Series Electronic Compression Testing Machine This series machine comply with standard GB/T16491-1996, JJG-1986,GB/T14201-93 Iron Ore Pellets-Determination of Crushing Strength, GB4857.3 Packaging Complete Filled Transport Packages Stacking Test Using Static Load, GB4857.4 packaging-transport packages-compression testing method, GB/T8168-2008 Testing Method of Static Compression for Package Cushioning Materials, and can make mechanical property test and analysis to metallurgical pellet, coking ore, paper tube, corrugated case, packing case. It is widely used in metallurgy, mine, packaging and other industries with features of auto control test procedure, data statistics, analysis, quick return after test etc. Model and spec WDW-Y10 WDW-Y15 Max. load (KN) 10 15 Effective measuring range 1%-100%FS Precision of ±1% indicating value (better than indicating value) Max. test space 300/ or can be made as required (mm) Size of upper and Can be made as required lower platens(mm) Displacement High precise photoelectric encoder; 0.01mm measuring mode and resolution Control mode LCD or microcomputer control special software Test speed set, peak hold and data statistics(can be made as required)
12.MWD Series Wood-based Panel Universal Testing Machine This series machine is widely used to test mechanical property for wood, container floor, wood-based panel and surface decorated panel, in line with standard GB/T16491-1999, JJG139-1999 and GB17657-1999 Test Method of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels and can perform tests of bonding strength, static strength, elastic modulus, screw holding capacity and bending index, and they are ideal testing equipments for quality inspection and plates industries. Model and spec MWD-10B MWD-10A/20A/50A/100A MWW-10/20/50/100 max. load (KN) 10 10/20/50/100 10/20/50/100 precision ±1% speed range 0.2-500mm/min 0.05-500mm/min control mode manual LCD control Computer control accessory Accessories for surface bonding strength, bending strength and elastic modulus measurement, screw holding, internal bonding strength, static strength loading mode manual Servo motor, ball screw power supply 220V±10% 50Hz 220V±10% 50Hz,0.5KW