TPCA Power Clamps Catalog

TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK mechanism TPCA82 TPCA62... and more. TPCA52 TPCA42 Contains information on TPCA-82, 62, 52, and 42 s! http://www.btmcomp.com/tpca-power-clamps.html www.btmcomp.com 81-364-4567

SAFETY NOTE It is the customer and/or user s responsibility to provide proper safety controls and/or guarding when a pinch point is present. ONE CLAMP DOES IT ALL! BTM s TPCA series of adjustable clamps are NAAMS compliant pneumatically operated sealed precision power clamps available in four standard sizes: 42, 52, 62, 82mm. Each clamp is constructed using a one-piece body, and each has been designed to be rugged, yet economical, making them ideal for a range of industrial applications. These clamps utilize patented TRILOK technology- a three point locking mechanism designed to keep a locked clamp locked, even if air pressure is lost. This allows the TPCA to have the flexibility to be used as a toggle clamp, a precision back up, or as a part trap. SAVE MONEY! BUY LESS CLAMPS! One TPCA clamp can have single or dual arms! With BTM s TPCA Clamps, you can reduce your spare inventory by keeping less clamps on the shelf. ADDITIONAL TPCA CLAMP FEATURES One clamp model for single and dual arm clamps - No need to change internal parts. Pin Arm Drive for versatile arm positioning & simplified arm change. - 12 degree of arm opening adjustability. Integrated proximity switch. No need to be adjusted for opening change. Top and Bottom porting. TPCA52, 62, and 82 complies to Global Standard Components NAAMS Spec. One Piece Body with Integrated Cylinder. Body is constructed of Aircraft Aluminum, Hard coated to a Rockwell C-7 for Excellent Wear Characteristics. Sealed Mechanism - Lubricated for Life of Clamp. Self Pumping Slide Rod Lubrication. Cushions Standard on Both Advance and Retract Motions. Access to manually unlock clamp linkage. Patented Precision TriLok Mechanism. CHANGING THE DEGREE OF ARM OPENING IS EASY! A TPCA Clamp is Adjustable using a Hex Wrench!! BTM reserves the right to make changes to its literature without any prior notice. Go to www.btmcomp.com for latest version. 2 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA CLAMPS UTILIZE PATENTED TECHNOLOGY BTM s patented TRILOK mechanism can be used as a clamp or as a precision back up and eliminates over center clamps. Slide A three point lock. The Mechanism does not unlock if air pressure is lost. Hub Link When used as a toggle clamp, the arm is shimmed so that the TRILOK mechanism is not engaged. The locking takes place within the linkage. This surface repeats its position with a high degree of accuracy throughout the life of the clamp. Standard Clamp Arms Toggle Clamp Part Trap Precision Backup Toggle Clamp BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 3

NEED A SMALLER CLAMP? CHECK OUT BTM S TPC-32! BTM s TPC-32 is weld-contamination sealed, light weight, features a 32mm bore, and a three point locking mechanism. Bore Size 31.8 [1.25] DIA. = 791.7mm 2 [1.23in 2 ] Arm Rotation (Deg.) 35 5 65 8 95 11 12 Cylinder Stroke (mm) 11.5 14.1 16.6 19.2 21.8 24.4 24.6 Maximum Full Cycle Cylinder Volume Recommended Operating Pressure 38.5 cm 3 [2.35in 3 ] 2.75 to 7 BAR [4 to 1 PSI] (Lubricated or Non-Lubricated Compressed Air) LEARN MORE ONLINE! Weight Holding Torque 1. kg [2.21 lbs] Without Arm 3 Nm [22 lbf] Clamping Torque 12.4 Nm @ 5.5 BAR [9.16 lbf-ft @ 8 PSI] www.btmcorp.com/tpc-32-clamp.html Cycle Time (based on a 12 opening at 5.5 BAR [8PSI]) 1. second closing cycle 1.25 second opening cycle BTM ALSO OFFERS OTHER CLAMP SOLUTIONS INCLUDING: GENERAL CLAMPING PC SERIES POWER CLAMPS Rugged & Reliable, BTM s PC series of clamps are designed to provide high clamping forces and long work life within a compact, lightweight unit. The one-piece body eliminates premature wear due to misalignment; and binding. LIGHT DUTY CLAMPING 1 SERIES CLAMPS These cost-effective 25mm bore clamps are designed for high production. Most models feature a manually positionable rotating head which locks into place when mounting screws are tightened, eliminating the need for angled mounting surfaces. SPECIALTY CLAMPING ASK ABOUT OUR ROTARY-LINEAR CLAMPS! www.btmcorp.com/clamp-solutions.html 4 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TABLE OF CONTENTS Catalog ID # 734229JA TPCA42... 6-9 TPCA42 CLAMP... 6-7 TPCA42 ARMS... 8-9 Holding Torque Clamping Torque 165 Nm [122 lbf] 43.4 Nm @ 5.5 BAR [32 lbf @ 8 PSI] TPCA52... 1-13 TPCA52 CLAMP... 1-11 TPCA52 ARMS... 12-13 Holding Torque Clamping Torque 29 Nm [214 lbf] 89.5 Nm @ 5.5 BAR (66 lbf @ 8 PSI) TPCA62... 14-17 TPCA62 CLAMP... 14-15 TPCA62 ARMS... 16-17 Holding Torque Clamping Torque 45 Nm [33 lbf] 257.6 Nm @ 5.5 BAR (19 lbf @ 8 PSI) TPCA82... 18-21 TPCA82 CLAMP... 18-19 TPCA82 ARMS... 2-21 Holding Torque Clamping Torque 745 Nm [55 lbf] 496.2 Nm @ 5.5 BAR (366 lbf @ 8 PSI) SWITCH INFORMATION... 22 WARRANTY INFORMATION... 23 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 5

TPCA42 CLAMPING FORCE PIVOT POINT A 791 x Line Pressure (BAR) BARS Length (mm) from POINT A to the center line of clamping contact area on clamp arm Length 4.8 x Line Pressure (PSI) PSI Length (in) from POINT A to the center line of clamping contact area on clamp arm For TPCA42 Arm Information See Pages 8-9. HOW TO ORDER clamp left arm right arm switch preset TPCA 42 G P - PD25334H 18 A L - PD25334H 18 A R - BDC - 9 clamp series -- clamp size -- port option -- hub connection type -- BTM arm number -- arm position -- arm orientation -- arm side -- BTM arm number -- arm position -- arm orientation -- arm side -- switch style -- See p. 9 See p. 9 See p. 22 preset arm opening -- (DEFAULT IS 9 ) PORT OPTION BTM No. N = 1/8 NPT PD2533A G = G1/8 PD2535A HUB CONNECTION TYPE P = PIN HUB 27 STANDARD ARM POSITION (WHEN CLOSED) - CONTACT BTM FOR SPECIALS 225 45 9 135 18 STANDARD ARM ORIENTATION (A) Arm Mounting Position Code Offset Arm Straight 15 45 N/A 12 12 45 12 12 12 INVERTED ARM ORIENTATION (B) Arm Mounting Position Code Offset Arm Straight 15 45 N/A N/A N/A 45 12 N/A N/A SWITCH NS (No Switch) PRESET 3 45 6 75 9 15 12 Clamp is shown in the closed position. The maximum counterclockwise arm opening value is noted in degrees for the specified arm positions to the right. 9 12 12 12 135 12 12 9 18 15 9 45 225 6 45 N/A 27 N/A N/A N/A 9 12 12 12 135 12 12 12 18 12 12 12 225 75 9 12 27 3 45 75 BDC (Turck DC) ARM ORIENTATION A = Standard B = Inverted A B ARM SIDE Left Arm Right Arm Dual Arm 6 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA42 Equivalent Bore Size 42. [1.65 ] DIA. = 1395mm 2 [2.16in 2 ] Arm Rotation (Deg.) 3 45 6 75 9 15 12 Cylinder Stroke (mm) 19.7 25.1 3.4 35.9 41.8 47.6 52.9 Recommended Operating Pressure Weight Holding Torque 2.75 to 7 BAR [4 to 1 PSI] (Lubricated or Non-Lubricated Compressed Air) 2. kg [4.5 lbs] Without Arm 165 Nm [122 lbf-ft] (No Air & Maintaining Rated Repeatability) Clamping Torque Arm to Mount Accuracy Repeatability ± º 3 Cycle Time Permissible Clamp Off-Set Distance 43.4 Nm @ 5.5 BAR [32 lbf-ft @ 8 PSI] ± º 15 (Clamp to Clamp) 1. second Clamp Closing Cycle 1. second Clamp Opening Cycle 3.mm [1.18 ] (See p. 8) ------------------ USE FLOW CONTROLS TO REDUCE IMPACT ------------------ 6. TYP. 4.±.2 R54.5 MIN. CLEARANCE RADIUS 81. 53.5 48.8 35.±.3 9.±.5 21. DIRECTION OF CLAMPING 41.8 2X 6 H7 1. 2X M6X1. 12. 12.5 1. 4. 5.±.5 3.±.5 PIVOT POINT A 9. 2. 25.±.3 7. 6.5 4.±.1 25. 4X M6X1. 12. 283.8 G1/8 OR 1/8 NPT CLAMP OPEN 87.2 MAX. 11.6 135.5 SWITCH PACKAGE G1/8 OR 1/8 NPT CLAMP CLOSE ARM OPENING ADJUSTMENT ACCESS 71.6 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 7

PD25335H 12. PD25338H 12. PD25335H Catalog PD25336H ID # 734229JA 12. 15. PD25336H 15. PD25338H PD25339H PD25339H 12. 15. 15. TPCA42 CLAMP ARM INFORMATION 41. 3. 4. 36. 41. 3. 4. 36. 25.4 LEFT ARM RIGHT ARM LEFT ARM RIGHT SIDE ARM ARM ARM SIDE CLAMP ARM DEFLECTION UNDER LOAD 25.4 SINGLE ARM DUAL ARMS ARM MOUNTING WITH HARDWARE SINGLE ARM DUAL ARMS PERMISSIBLE CLAMP OFFSET DISTANCE ARM MOUNTING WITH HARDWARE 3.mm [1.18 ] "X".13mm MAXIMUM ALLOWABLE WEIGHT ON CLAMP ARM ASSEMBLY ARM DEFLECTION UNDER LOAD Force on arm at X distance from pivot resulting in.13mm Maximum deflection. X (mm) Force (N) 125 88 1 144 75 2 Refer to the charts below for model specific information regarding the recommended allowable weight on the arm at given distances from the pivot. The distance from Pivot Point is the straight line distance from the centerline of the clamp at the pivot point to the center of gravity of the clamp arm assembly. The center of gravity is figured using the weight of the arm plus the total weight mounted on the arm. When using dual arms, add the weight of the second arm to the total weight. CENTER OF GRAVITY OF CLAMP ARM ASSEMBLY CLAMP ARM MAXIMUM WEIGHT 4.1 3.6 Straight Line Distance Dist 1 Straight Line Distance Center of Gravity of Clamp Arm Assembly WEIGHT AT CENTER OF GRAVITY = kg 3.2 2.7 2.3 1.8 1.4.9.5 CONSULT BTM CORPORATION FOR ANY APPLICATIONS ABOVE THE CURVE.. Dist 2 Dist 3 Mass @ Center of Gravity = 25. 5. 75. 1. 127. DISTANCE FROM PIVOT POINT "A" = mm 15. 8 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA42 CLAMP ARMS STRAIGHT ARM 22. 16.±.3 R17.5 34. 5. 65. PD25331H PD25332H PD25333H 9. 12. 15. 8. 95. 11. 125. 14. 6. F7 THRU TYP. 9. THRU TYP. 8. 15 OFFSET 45 OFFSET 15. 37. 45. 67. R17.5 R17.5 68 34. 68 34. PD25334H 9. PD25337H 9. PD25335H 12. PD25338H 12. PD25336H 15. PD25339H 15. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 9

TPCA52 CLAMPING FORCE PIVOT POINT A 165 x Line Pressure (BAR) BARS Length (mm) from POINT A to the center line of clamping contact area on clamp arm Length 1 x Line Pressure (PSI) PSI Length (in) from POINT A to the center line of clamping contact area on clamp arm For TPCA52 Arm Information See Pages 12-13. HOW TO ORDER clamp left arm right arm switch preset TPCA 52 G P - 733216H 18 A L - 733216H 18 A R - TDC - 9 clamp series -- clamp size -- port option -- hub connection type -- BTM arm number -- arm position -- arm orientation -- arm side -- BTM arm number -- arm position -- arm orientation -- arm side -- switch style -- See p. 13 See p. 13 See p. 13 preset arm opening -- (DEFAULT IS 9 ) PORT OPTION BTM No. N = 1/4 NPT PD255A G = G1/4 PD2513A HUB CONNECTION TYPE P = PIN HUB STANDARD ARM POSITION (WHEN CLOSED) - CONTACT BTM FOR SPECIALS 27 225 STANDARD ARM ORIENTATION (A) 45 9 135 18 Arm Mounting Position Code Offset Arm Straight 25 5 N/A 12 12 45 N/A 12 12 INVERTED ARM ORIENTATION (B) Arm Mounting Position Code Offset Arm Straight 25 5 N/A N/A N/A 45 N/A N/A N/A SWITCH NS (No Switch) PRESET 3 45 6 75 9 15 12 Clamp is shown in the closed position. The maximum counterclockwise arm opening value is noted in degrees for the specified arm positions to the right. 9 12 12 12 135 12 9 75 18 9 45 3 225 45 N/A N/A 27 N/A N/A N/A 9 12 N/A N/A 135 12 12 12 18 9 12 12 225 45 9 15 27 N/A 45 6 TDC (Turck DC) [Standard] A = Standard B = Inverted ARM ORIENTATION A B See p.22 for additional switch options. ARM SIDE Left Arm Right Arm Dual Arm 1 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA52 Equivalent Bore Size 52. [2.] DIA. = 226mm 2 [3.14in 2 ] Arm Rotation (Deg.) 3 45 6 75 9 15 12 Cylinder Stroke (mm) 25.99 33.17 4.24 47.63 55.4 63.2 7.28 Recommended Operating Pressure Weight Holding Torque 2.75 to 7 BAR [4 to 1 PSI] (Lubricated or Non-Lubricated Compressed Air) 3.8 kg [8.4 lbs] Without Arm 29 Nm [214 lbf-ft] (No Air & Maintaining Rated Repeatability) Clamping Torque Arm to Mount Accuracy Repeatability ± º 3 Cycle Time Permissible Clamp Off-Set Distance 89.5 Nm @ 5.5 BAR [66 lbf-ft @ 8 PSI] ± º 15 (Clamp to Clamp) 1. second Clamp Closing Cycle 1. second Clamp Opening Cycle 37.5mm [1.48 ] (See p. 12) ------------------ USE FLOW CONTROLS TO REDUCE IMPACT ------------------ 7.5 TYP. 48.±.2 R7. MIN CLEARANCE RADIUS 2X 8 H7 12. 113. 8. 65. 29. 45.±.3 5.±.5 DIRECTION OF CLAMPING 5.8 2X M8X1.25 16. 15.±.1 63.5±.1 11.±.1 4.±.5 9. 36.5±.5 PIVOT POINT A 111.5 32.±.1 45.±.3 55.±.1 2X 8 H7 12. 338.8 3.±.2 4X M8X1.25 16. G1/4 OR 1/4 NPT CLAMP CLOSE 72.8 13.±.1 19.5 99.4 MAX. 16. SWITCH PACKAGE G1/4 OR 1/4 NPT CLAMP OPEN ARM OPENING ADJUSTMENT ACCESS 87.9 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 11

733217H [ACA217M] 12. 733227H [ACA227M] 12. Catalog ID # 734229JA 733218H [ACA218M] 15. 733228H [ACA228M] 15. TPCA52 CLAMP ARM INFORMATION 46.2 36.8 52.4 45.7 31.8 LEFT RIGHT ARM ARM ARM SIDE LEFT RIGHT ARM ARM ARM SIDE CLAMP ARM DEFLECTION UNDER LOAD SINGLE ARM DUAL ARMS ARM MOUNTING WITH HARDWARE PERMISSIBLE CLAMP OFFSET DISTANCE 37.5mm [1.48 ] "X".13mm MAXIMUM ALLOWABLE WEIGHT ON CLAMP ARM ASSEMBLY ARM DEFLECTION UNDER LOAD Force on arm at X distance from pivot resulting in.13mm Maximum deflection. X (mm) Force (N) 125 113 1 165 75 29 Refer to the charts below for model specific information regarding the recommended allowable weight on the arm at given distances from the pivot. The distance from Pivot Point is the straight line distance from the centerline of the clamp at the pivot point to the center of gravity of the clamp arm assembly. The center of gravity is figured using the weight of the arm plus the total weight mounted on the arm. When using dual arms, add the weight of the second arm to the total weight. CENTER OF GRAVITY OF CLAMP ARM ASSEMBLY CLAMP ARM MAXIMUM WEIGHT 4.1 Straight Line Distance Dist 1 Straight Line Distance Center of Gravity of Clamp Arm Assembly WEIGHT AT CENTER OF GRAVITY = kg 3.6 3.2 2.7 2.3 1.8 1.4.9.5 CONSULT BTM CORPORATION FOR ANY APPLICATIONS ABOVE THE CURVE.. Dist 2 Dist 3 Mass @ Center of Gravity = 25. 5. 75. 1. 127. DISTANCE FROM PIVOT POINT "A" = mm 15. 12 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA52 CLAMP ARMS STRAIGHT ARM 15. 15. 2.±.3 R21.5 18. 34. 5. 65. 73326H [ACA26M] 73327H [ACA27M] 73328H [ACA28M] 9. 12. 15. 8. 95. 11. 125. 14. 1. 8. F7 THRU TYP. 11. THRU TYP. 25 OFFSET 5 OFFSET 2. 25. 5. 41.2 5. 75. R21.5 R45. R21.5 16. R2. R6. 34. 68 32. 34. 733216H [ACA216M] 9. 733226H [ACA226M] 9. 733217H [ACA217M] 12. 733227H [ACA227M] 12. 733218H [ACA218M] 15. 733228H [ACA228M] 15. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 13

TPCA62 CLAMPING FORCE PIVOT POINT A 465 x Line Pressure (BAR) BARS Length (mm) from POINT A to the center line of clamping contact area on clamp arm Length 28.5 x Line Pressure (PSI) PSI Length (in) from POINT A to the center line of clamping contact area on clamp arm For TPCA62 Arm Information See Pages 16-17. HOW TO ORDER clamp left arm right arm switch preset TPCA 62 G P - 723119H 18 A L - 723119H 18 A R - TDC - 9 clamp series -- clamp size -- port option -- hub connection type -- BTM arm number -- arm position -- arm orientation -- arm side -- BTM arm number -- arm position -- arm orientation -- arm side -- switch style -- See p. 17 See p. 17 See p. 22 preset arm opening -- (DEFAULT IS 9 ) PORT OPTION BTM No. N = 1/4 NPT PD2344A G = G1/4 PD2349A HUB CONNECTION TYPE P = PIN HUB 45 9 STANDARD ARM POSITION (WHEN CLOSED) - CONTACT BTM FOR SPECIALS 27 225 STANDARD ARM ORIENTATION (A) 135 18 Arm Mounting Position Code Offset Arm Straight 25 7 12 N/A 12 12 12 45 12 12 12 12 Arm Mounting Position Code INVERTED ARM ORIENTATION (B) Offset Arm Straight 25 7 12 N/A N/A N/A N/A 45 12 N/A N/A N/A SWITCH NS (No Switch) PRESET 3 45 6 75 9 15 12 Clamp is shown in the closed position. The maximum counterclockwise arm opening value is noted in degrees for the specified arm positions to the right. 9 12 12 12 15 135 12 9 75 6 18 15 45 3 N/A 225 6 N/A N/A N/A 27 N/A N/A N/A N/A 9 12 N/A N/A N/A 135 12 12 12 12 18 15 12 12 12 225 6 75 15 12 27 N/A 3 6 9 TDC (Turck DC) [Standard] A = Standard B = Inverted ARM ORIENTATION A B See p.22 for additional switch options. ARM SIDE Left Arm Right Arm Dual Arm 14 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA62 Equivalent Bore Size 62. [2.5 ] DIA. = 3161mm 2 [4.91in 2 ] Arm Rotation (Deg.) 3 45 6 75 9 15 12 Cylinder Stroke (mm) 34.6 43.67 53.7 62.87 73.18 8.14 93.5 Recommended Operating Pressure Weight Holding Torque 2.75 to 7 BAR [4 to 1 PSI] (Lubricated or Non-Lubricated Compressed Air) 5.8 kg [12.6 lbs] Without Arm 45 Nm [33 lbf-ft] (No Air & Maintaining Rated Repeatability) Clamping Torque Arm to Mount Accuracy Repeatability ± º 3 Cycle Time Permissible Clamp Off-Set Distance 257.6 Nm @ 5.5 BAR [19 lbf-ft @ 8 PSI] ± º 15 (Clamp to Clamp) 1. second Clamp Closing Cycle 1. second Clamp Opening Cycle 75mm [2.95 ] (see p.16) ------------------ USE FLOW CONTROLS TO REDUCE IMPACT ------------------ 125. 8. 9.5 TYP. 54.±.2 R88.5 MIN. CLEARANCE RADIUS 77. 55.±.3 1.±.5 36.9 DIRECTION OF CLAMPING 64.4 2X 1 H7 15. 2X M1X1.5 2. 46.9 141. 15.±.1 32.±.1 3.±.2 63.5±.1 11.±.1 2X 8 H7 12. 4X M8X1.25 16. 55.±.5 45.±.3 9.5 PIVOT 36.5±.5 POINT A 55.±.1 13.±.1 G1/4 OR 1/4 NPT CLAMP CLOSE 114.8 MAX. 2.5 185. SWITCH PACKAGE G1/4 OR 1/4 NPT CLAMP OPEN ARM OPENING ADJUSTMENT ACCESS 1. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 15

723121H [ACA21M] 723123H [ACA23M] 723122H [ACA22M] 723124H [ACA24M] 723123H [ACA23M] 723124H [ACA24M] 225. 723133H [ACA33M] 195. 723135H [ACA35M] 255. 723134H [ACA34M] Catalog 225. ID # 734229JA 723136H [ACA36M] 285. 723135H [ACA35M] TPCA 255.POWER CLAMPS 723136H [ACA36M] 285. 225. 195. 255. 225. 285. 255. 285. 723145H [ACA45M] 723147H [ACA47M] 723146H [ACA46M] 723148H [ACA48M] 723147H [ACA47M] 723148H [ACA48M] 225. 195. 255. 225. 285. 255. 285. TPCA62 CLAMP ARM INFORMATION 56.7 57.4 43.4 52.6 LEFT ARM ARM SIDE LEFT ARM RIGHT ARM ARM SIDE RIGHT ARM CLAMP ARM DEFLECTION UNDER LOAD 56.7 57.4 43.4 52.6 41.3 41.3 SINGLE ARM DUAL ARMS ARM MOUNTING WITH HARDWARE SINGLE ARM DUAL ARMS PERMISSIBLE CLAMP OFFSET DISTANCE ARM MOUNTING WITH HARDWARE 75mm [2.95 ] "X".13mm Arm Deflection Under Load Force on arm at X distance from pivot resulting in.13mm Maximum deflection. X (mm) Force (N) 25 156 225 2 2 245 175 289 15 378 125 489 1 734 MAXIMUM ALLOWABLE WEIGHT ON CLAMP ARM ASSEMBLY Refer to the charts below for model specific information regarding the recommended allowable weight on the arm at given distances from the pivot. The distance from Pivot Point is the straight line distance from the centerline of the clamp at the pivot point to the center of gravity of the clamp arm assembly. The center of gravity is figured using the weight of the arm plus the total weight mounted on the arm. When using dual arms, add the weight of the second arm to the total weight. CENTER OF GRAVITY OF CLAMP ARM ASSEMBLY CLAMP ARM MAXIMUM WEIGHT 5.5 Straight Line Distance Dist 1 Straight Line Distance Center of Gravity of Clamp Arm Assembly WEIGHT AT CENTER OF GRAVITY = kg 5. 4.5 4. 3.5 3. 2.5. CONSULT BTM CORPORATION FOR ANY APPLICATIONS ABOVE THE CURVE. Dist 2 Dist 3 25. 5. 75. 1. 127. 15. 175. 2. 225. 25. 275. Mass @ Center of Gravity = DISTANCE FROM PIVOT POINT "A" = mm 16 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA62 CLAMP ARMS STRAIGHT ARM 23. 245. 2. 25. 55. 15. 18. 65. 7. 1. 115. 12. 15. 25.±.3 R27. 25. 72317H [ACA7M] 72318H [ACA8M] 72319H [ACA9M] 72311H [ACA1M] 723111H [ACA11M] 723112H [ACA12M] 5. 135. 165. 195. 225. 255. 285. 65. 8. 95. 11. 125. 14. 155. 17. 185. 2. 215. 26. 275. 12.5 8. F7 THRU TYP 11. THRU TYP 25 OFFSET 7 OFFSET 12 OFFSET R27. R13. R38. 21.7 5. R27. 22. 44. 75 R38. 33.7 5. R27. 22. 44. 79 R38. 39.1 5. R15. R15. 723119H [ACA19M] 135. 723131H [ACA31M] 135. 723143H [ACA43M] 135. 72312H [ACA2M] 165. 723132H [ACA32M] 165. 723144H [ACA44M] 165. 723121H [ACA21M] 195. 723133H [ACA33M] 195. 723145H [ACA45M] 195. 723122H [ACA22M] 225. 723134H [ACA34M] 225. 723146H [ACA46M] 225. 723123H [ACA23M] 255. 723135H [ACA35M] 255. 723147H [ACA47M] 255. 723124H [ACA24M] 285. 723136H [ACA36M] 285. 723148H [ACA48M] 285. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 17

TPCA82 CLAMPING FORCE PIVOT POINT A 92 x Line Pressure (BAR) BARS Length (mm) from POINT A to the center line of clamping contact area on clamp arm Length 55 x Line Pressure (PSI) PSI Length (in) from POINT A to the center line of clamping contact area on clamp arm For TPCA82 Arm Information See Pages 2-21. HOW TO ORDER clamp left arm right arm switch preset TPCA 82 G P - 723213H 18 A L - 723213H 18 A R - TDC - 9 clamp series -- clamp size -- port option -- hub connection type -- BTM arm number -- See p. 21 arm position -- arm orientation -- arm side -- BTM arm number -- See p. 21 arm position -- arm orientation -- arm side -- switch style -- See p. 22 preset arm opening -- (DEFAULT IS 9 ) PORT OPTION BTM No. N = 1/4 NPT PD2541A G = G1/4 PD2543A HUB CONNECTION TYPE P = PIN HUB 45 9 STANDARD ARM POSITION (WHEN CLOSED) - CONTACT BTM FOR SPECIALS 27 225 STANDARD ARM ORIENTATION (A) 135 18 Arm Mounting Position Code Offset Arm Straight 25 7 12 N/A N/A 12 12 45 12 12 12 12 Arm Mounting Position Code INVERTED ARM ORIENTATION (B) Offset Arm Straight 25 7 12 N/A N/A N/A N/A 45 12 N/A N/A N/A SWITCH NS (No Switch) PRESET 3 45 6 75 9 15 12 Clamp is shown in the closed position. The maximum counterclockwise arm opening value is noted in degrees for the specified arm positions to the right. 9 12 12 12 12 135 12 15 75 75 18 9 6 3 3 225 6 N/A N/A N/A 27 N/A N/A N/A N/A 9 12 N/A N/A N/A 135 12 12 12 12 18 9 12 12 12 225 6 75 15 12 27 N/A 3 6 75 TDC (Turck DC) [Standard] A = Standard B = Inverted ARM ORIENTATION A B See p.22 for additional switch options. ARM SIDE Left Arm Right Arm Dual Arm 18 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA82 Equivalent Bore Size 82. [3.25 ] DIA. = 5352mm 2 [8.29in 2 ] Arm Rotation (Deg.) 3 45 6 75 9 15 12 Cylinder Stroke (mm) 44.29 56.7 68.79 81.27 94.24 17.15 118.79 Recommended Operating Pressure Weight Holding Torque 2.75 to 7 BAR [4 to 1 PSI] (Lubricated or Non-Lubricated Compressed Air) 14.3 kg [31.5 lbs] Without Arm 745 Nm [55 lbf-ft] (No Air & Maintaining Rated Repeatability) Clamping Torque Arm to Mount Accuracy Repeatability ± º 3 Cycle Time Permissible Clamp Off-Set Distance 496.2 Nm @ 5.5 BAR [366 lbf-ft @ 8 PSI] ± º 15 (Clamp to Clamp) 1. second Clamp Closing Cycle 1. second Clamp Opening Cycle 15mm [5.91 ] (see p.2) ------------------ USE FLOW CONTROLS TO REDUCE IMPACT ------------------ 164.5 113. 95. 47.5 12.5 TYP. 76.±.2 R19. MIN. CLEARANCE RADIUS 7.±.3 15.±.5 DIRECTION OF CLAMPING 2X 12 H7 18 92.1 2X M12X1.75 24. 25.±.1 15.±.1 9.±.1 65.±.5 11.5 5.±.5 PIVOT POINT A 19. 5.±.1 75.±.3 8.±.1 514.4 5.±.2 2X 8 H7 12. 4X M1X1.5 2. 21.±.1 G1/4 OR 1/4 NPT CLAMP OPEN 143.7 MAX. 29. 226.5 SWITCH PACKAGE G1/4 OR 1/4 NPT CLAMP CLOSE ARM OPENING ADJUSTMENT ACCESS 134. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 19

7232134H 7232135H [ACA134M] [ACA135M] 7232155H [ACA155M] 7232154H [ACA154M] 275. 7232135H 7232136H [ACA135M] [ACA136M] 7232155H 7232156H [ACA155M] [ACA156M] 35. 7232136H 7232137H [ACA136M] [ACA137M] Catalog ID # 734229JA7232156H 7232157H [ACA156M] [ACA157M] 335. 7232138H [ACA138M] 7232158H [ACA158M] 7232137H [ACA137M] TPCA 7232157H [ACA157M] 365. POWER CLAMPS 7232138H [ACA138M] 7232158H [ACA158M] 395. 275. 35. 335. 365. 395. 7232174H 7232175H [ACA174M] [ACA175M] 7232176H [ACA176M] 7232175H [ACA175M] 7232176H 7232177H [ACA176M] [ACA177M] 7232177H 7232178H [ACA177M] [ACA178M] 7232178H [ACA178M] 275. 35. 335. 365. 395. 35. 335. 365. 395. TPCA82 CLAMP ARM INFORMATION 74. 58. 74. 58. 71. 71. 71. 71. 57.2 LEFT RIGHT ARM ARM LEFT RIGHT ARM SIDE ARM ARM ARM SIDE CLAMP ARM DEFLECTION UNDER LOAD 57.2 SINGLE ARM DUAL ARMS SINGLE ARM ARM MOUNTING DUAL WITH ARMS HARDWARE PERMISSIBLE ARM MOUNTING CLAMP OFFSET WITH HARDWARE DISTANCE "X".13mm 15mm [5.91 ] Arm Deflection Under Load Force on arm at X distance from pivot resulting in.13mm Maximum deflection. X (mm) Force (N) 37 165 34 25 31 267 28 365 25 449 22 623 19 15 16 1397 13 273 1 365 MAXIMUM ALLOWABLE WEIGHT ON CLAMP ARM ASSEMBLY Refer to the charts below for model specific information regarding the recommended allowable weight on the arm at given distances from the pivot. The distance from Pivot Point is the straight line distance from the centerline of the clamp at the pivot point to the center of gravity of the clamp arm assembly. The center of gravity is figured using the weight of the arm plus the total weight mounted on the arm. When using dual arms, add the weight of the second arm to the total weight. CENTER OF GRAVITY OF CLAMP ARM ASSEMBLY CLAMP ARM MAXIMUM WEIGHT 13.6 Straight Line Distance Dist 1 Straight Line Distance Center of Gravity of Clamp Arm Assembly WEIGHT AT CENTER OF GRAVITY = kg 12.2 1.9 9.5 8.1 6.8 5.4 4.1 2.7 1.4 CONSULT BTM CORPORATION FOR ANY APPLICATIONS ABOVE THE CURVE. Dist 2 Dist 3 15. 175. 2. 225. 25. 28. 3. 33. 35. 38. 4. 43. Mass @ Center of Gravity = DISTANCE FROM PIVOT POINT "A" = mm 2 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

TPCA82 CLAMP ARMS STRAIGHT ARM 85. 1. 115. 13. 145. 16. 175. 19. 25. 22. 235. 25. 265. 28. 295. 31. 325. 34. 355. 37. 385. R37. 2. 24. 34. 32.±.3 723211H [ACA11M] 7232111H [ACA111M] 7232112H [ACA112M] 7232113H [ACA113M] 7232114H [ACA114M] 7232115H [ACA115M] 7232116H [ACA116M] 7232117H [ACA117M] 7232118H [ACA118M] 7. 155. 185. 215. 245. 275. 35. 335. 365. 395. 16. 8. F7 THRU TYP 11. THRU TYP 25 OFFSET 7 OFFSET 12 OFFSET R37. R15. 2. 25. 6. R4. 29.9 7. R37. R15. 75 65. 7. 15. R4. 2. 4. 7. R37. 75 R15. 2. 4. 115. 12. 155. R4. 7. 723213H [ACA13M] 7232131H [ACA131M] 7232132H [ACA132M] 7232133H [ACA133M] 7232134H [ACA134M] 7232135H [ACA135M] 7232136H [ACA136M] 7232137H [ACA137M] 7232138H [ACA138M] 155. 185. 215. 245. 275. 35. 335. 365. 395. 723215H [ACA15M] 7232151H [ACA151M] 7232152H [ACA152M] 7232153H [ACA153M] 7232154H [ACA154M] 7232155H [ACA155M] 7232156H [ACA156M] 7232157H [ACA157M] 7232158H [ACA158M] 155. 185. 215. 245. 275. 35. 335. 365. 395. 723217H [ACA17M] 7232171H [ACA171M] 7232172H [ACA172M] 7232173H [ACA173M] 7232174H [ACA174M] 7232175H [ACA175M] 7232176H [ACA176M] 7232177H [ACA177M] 7232178H [ACA178M] 155. 185. 215. 245. 275. 35. 335. 365. 395. 74. 71. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 58. www.btmcomp.com 71. 21

STANDARD SWITCH - TPCA52, 62, & 82 Turck DC [TDC] Ni2Q6.5AP6-.16-FS4.4X3/S34 SO.2 reads the closed position of the clamp. If SO. 2 is required for the open position (transposed), order: TTDC 1 2 A1 A2 LED INDICATORS YELLOW - SO1 OUTPUT ENERGIZED GREEN - POWER ON RED - SO2 OUTPUT ENERGIZED STANDARD SWITCH - TPCA42 Turck DC [BDC] Ni2-BTM-,16-BDS-2AP6X3-H1141/S34 SO.2 reads the closed position of the clamp. If SO. 2 is required for the open position (transposed), order: TBDC LED INDICATORS YELLOW - SO1 OUTPUT ENERGIZED GREEN - POWER ON RED - SO2 OUTPUT ENERGIZED Optional switches may be available upon request (including Turck AC [TAC for TPCA52, 62, & 82] or [BAC for TPCA42]) Contact BTM for price and delivery information. 22 BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com

WARRANTY INFORMATION BTM Company, LLC. warranties its TPCA Clamps against defects in material and workmanship for the life of the tool/program which the clamp was originally sold or 3 million cycles, whichever comes first. This warranty is limited to replacing or repairing at BTM s option, F.O.B. BTM s factory, any part found by BTM to be defective in materials and/or workmanship. Any application of a BTM product outside the intended use of the product shall not be warranted by BTM Company, LLC.. Furthermore, BTM will not be liable for any expenses incurred for repairs or replacement made outside BTM s facilities without written consent (or damages arising out of such replacements or repairs). Under no circumstances will BTM be held responsible for any consequential damages. The warranty is limited to the repair or replacement of the defective part(s) and does not include installation. This warranty is the only warranty extended by the seller in connection with any sale made hereunder and is in lieu of all other warranties, express, implied or statutory including warranties of merchantability and fitness for purpose. BTM COMPANY, LLC. 3 DAVIS ROAD MARYSVILLE, MI 484 Tel: 81-364-4567 Fax: 81-364-6178 www.btmcomp.com 23

OTHER PRODUCTS FOR AUTOMATION Clamps Grippers From heavy duty precision sealed locking power clamps to simple light duty OMNI models, BTM manufactures clamps in a range of styles and sizes for a wide variety of applications. BTM manufactures a high quality line of grippers ranging from heavy duty models to light duty models in a variety of styles and sizes. Pin Locator Clamps OTHER QUALITY BTM PRODUCTS TO CONSIDER BTM s Locator Clamps are ideal for locating & holding production material and are used in a variety of manufacturing areas including automotive & refrigeration. Pin Sizes range from as small as 6mm (PLC-25 Light Duty Clamp) to as large as 4mm (PLC-63 & LPLC-38 locking clamp). Single Finger Hook Models (without the locating pin) are also available in both locking and non-locking configurations. Rod-Locking Pin Locator Clamps These clamps employ a rod locking feature which allows the clamp to retain the part when air pressure is removed/lost. Precision Shot Pin Cylinders BTM s Precision Shot Pin Cylinders are ideal for locating production material through precisely pierced holes - including clamping and fixturing. For more information, or to view our other products, please visit: www.btmcomp.com