MANN+HUMMEL In-line oil filters

Similar documents
MANN+HUMMEL Filters for Liquids

Features. Power supply. Control signal. Run-time. (min./90 )

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

LifeTec PP N PROCESS FILTRATION FROM PURE TO STERILE MAIN FEATURES & BENEFITS PRODUCT DESCRIPTION INDUSTRIES

Accessories. Guard grilles, streamers 362. Wall rings 372. Connection lines 374. Accessories for Q-motors and energy-saving motors (ESM) 374

GUARDIAN MEDIUM PRESSURE

CS 7700 FULL FUNCTION LOBBY TERMINAL REAR LOAD - 15" OR 19" DISPLAY

Model 3500 Transmitter (9-wire) or Model 3300 Peripheral

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

ARGUS DIFFERENTAL PRESSURE FEATURES. D560 ARGUS ATEX Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH DIFFERENTIAL PRESSURE

HFKN. The SMW-AUTOBLOK. Technology at the highest level:

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts

MANN+HUMMEL Fuel filters

5000 series strike. Installation Instructions. ASSA ABLOY, the global leader in door opening solutions HES 2005

Connectors according to DIN /IEC

Linear measuring technology

CS 5700 LOBBY CASH DISPENSER REAR LOAD - 15" DISPLAY OR 19" DISPLAY TYPICAL ACCESS TO LEVELING LEGS - RANGE (2) EACH SIDE OF SAFE CEN I SAFE ONLY * *

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

POWER TRIM. Table of Contents. Section 5B - Trim Cylinders

HF Bloc-...-VPS HF Bloc-...-DSLC-SG HF Bloc-...-DSLC-HP

PERSEUS DIFFERENTIAL PRESSURE DF61 & DF62 ATEX & IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE SWITCH

Basic module type PVBZ. PVP with integrated HPCO. Tech Note

stops vibrations SWISS TECHNOLOGY

LifeTec PT N PROCESS FILTRATION FROM PURE TO STERILE MAIN FEATURES & BENEFITS PRODUCT DESCRIPTION INDUSTRIES

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187

Assembly Instructions

POWER STEERING 7 A PUMP

Basic Module Type PVBZ. PVP with Integrated HPCO. Tech Note

Snap & Grow 8 x8 254 L x 249 W x 260 H cm 100 L x 98 W x /2 H

Snap & Grow 8 x8 + 4 Extension

Snap & Grow 6 x8 254 L x 190 W x 209 H cm 100 L x 74 3 /4 W x 82 1 /4 H

drylin stainless steel Lubrication free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery

Assembly Instructions

ARGUS MEDIUM / HIGH PRESSURE

Assembly Instructions

Roller and ball bars for easy and safe die change

3/8" Square Multi-Turn Cermet Trimmer

SureForce Bar Clamps. More powerful clamping force with less effort

HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version

4/2- and 4/3-way shut-off valve

F200 SERIES COMPRESSED AIR FILTERS

Accessories. Guard grille, streamers 238. Wall rings 248. Connection leads 250. Accessories for ESM and Q-motor 250

Power supplies and transformers

Go to the page for your application: face frame page 9, panel page 11, or narrow frame aluminum door page 13.

ALPHA STERN DRIVE 2 E TRANSOM ASSEMBLY

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

NV/NH horizontal fuse-switch disconnectors KVL for busbar mounting

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

ELECTRICAL SYSTEM 4 D INSTRUMENTATION

The quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

JUMO MIDAS S05 OEM pressure transmitter - universal

Operation Manual. Meter Relay Model NRE-65A

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94

MICROMASTER 440 Inverter

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

POWER STEERING PUMP 10 A

MODEL RD5000 MONO-BLOCK. Model RD5100. Model RD5200. Model RD5300. Directional Control Valves 1, 2, 3 Spool VALVES CATV

CRUISE CONTROL (VACUUM TYPE)

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve

AIR CONDITIONERS FOR TELECOMMUNICATION FROM 1,5 TO 20 kw

Cooling System. Table of Contents. Section 6A - All Models. All Models

11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:

drylin Stainless Steel Lubricant free Temperature resistant up to +250 C Corrosion resistant Chemical resistant Standard parts with quick delivery

Plastic enclosure with Silicone protector

The original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

9400/F9400 SERIES SURFACE VERTICAL ROD EXIT DEVICE

JS Series Sub-Miniature Slide Switches

CALL HEIGHT CARD READER TOP OF MONITOR FRONT SIDE CONCRETE SURFACE TO BE FLAT AND LEVEL IN AREA OF UNIT

Electrical measurement and control. Measurement Transformers and Shunts

SYSTEM FITTINGS FOR OUTWARD OPENING WINDOWS AND DOORS

Distribution & Power Transformers

COMMANDER 3000 CLASSIC PANEL MOUNT REMOTE CONTROL

Electrical System. Table of Contents. Section 4A - Starting System. Starting System

Changeover Switches Bypass Switches

9300/F9300 SERIES RIM EXIT DEVICE

200 DPG MAGNETIC PRINCIPLE SALIENT FEATURES !!! !!!

Engine. Table of Contents. Section 3A - Engine

JET PUMP R1 JUNE 1996 JET PUMP

Kolibri Energy chains

Timing/Synchronizing/ Adjusting (3 Cylinder Models)

Press control block PSB Type approved according to DIN EN 693

ACCESSORIES. Table of Contents. Section 8A - All Models

HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version

PRODUCT INFORMATION. English MCF - MBF - MBL HIGH PRESSURE. Series

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

TITGEMEYER Gruppe10GB(0517)1. Axles

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Name Model Description/Function. Directional Control Valve Station 5914 Used to activate the Pneumatic Box Feeder B

Proportional directional valves

PREFILL AND EXHAUST VALVE PV 100 TO PV 200

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

PERSEUS ULTRA LOW PRESSURE

3/8" Square Multi-Turn Cermet Trimmer

Transcription:

MANN+HUMMEL In-line oil filters 5

MANN+HUMMEL In-line oil filters MANN+HUMMEL in-line filters re used minly in ydruli systems, for te filtrtion of engine nd gerbox oil, nd in lube-oil iruits in generl menil engineering pplitions. Te rnge of filters inludes filters wit single eds, duplex filters witout ngeover, duplex filters wit ngeover, nd lrge triplex oil filters. Te filtrtion rteristis depend on te respetive spin-on filter nd used filter medium. Te dvntges t glne: Esy to fit to existing lines Solid nd stble st luminium onstrution Inresed flexibility vilble for stndrd version wit option of or servie swit (see pges 06 07) Duplex types wit ngeover vilble Miniml pressure drop Proven qulity of MANN+HUMMEL spin-on filters Design Te filters onsist of te filter ed wit onnetion treds, mounting oles nd te MANN+HUMMEL spin-on filter. MANN+HUMMEL servie inditors, servie swites nd bypss vlves ve to be seleted su tt wen servie is neessry signl is given before te bypss vlve opens. Sould you ve ny questions plese get in tou wit your MANN+HUMMEL ontt prtner. Avilble versions: wit bypss vlve witout servie inditor wit bypss vlve nd servie inditor wit bypss vlve nd servie swit (mke/brek ontt onvertible) 6

Instlltion nd mintenne Te filter is fitted in te pipeline, wereby te flow diretion s to be observed. Tis is indited by rrows on te onnetion treds. Te time for mintenne is usully defined by te engine or equipment mnufturer. Mintenne simply requires replement of te omplete spin-on filter. Te respetive spin-on filter n esily be removed using MANN+HUMMEL filter wren (see pge 05). Te in-line filter llows vrious ombintions of te spin-on filter nd filter ed. Tis tlogue only lists te bsi types. If you do not find n in-line filter suitble for your pplition, plese get in tou wit your MANN+HUMMEL ontt prtners. Tey will be ppy to dvise you on te pproprite in-line filter onsisting of filter ed, spin-on filter nd essories. Digrm of filter rrngement round te engine Injetion pump Engine Oil full flow Min fuel filter Oil prtil flow Preliminry fuel filter Oil Fuel 7

Overview of oil filter eds Single ed wit flnge onnetion Pge 0 Compt filter ed wit low spe requirement nd te onnetions mde from bove. In spite of its ompt form te ed s dvned flow rteristis witout defletion of te flow. Single in-line ed Tis universl filter ed is designed for instlltion in pipelines. Te eds lredy ve mounting oles suitble for instlltion of MANN+HUMMEL servie swit nd servie inditor (see pges 06-07) vilble s n optionl extr. Pge + Pge 4+ Pge + 8

Overview of oil filter eds In-line duplex witout ngeover Pge +6 Tis ed llows te fitting of two filters in prllel to enble iger volume flow or longer filter servie life. In-line duplex wit ngeover Pge 8+9 Tis robust filter ed suitble for evy duty pplitions enbles filter nge to be rried out during ontinuous opertion. In-line triplex Pge 7 Tis filter ed s tree filters fitted in prllel to enble iger volume flow or longer filter servie life. 9

In-line oil filters wit single ed Operting pressure 4 br, up to l/min Flnge onnetion Tis ligt nd robust filter ed is mounted wit two srews to flt surfe. Te filter inlet nd outlet re from bove. Crteristis Flow resistne. to ISO 968 wit 6 mm /s. Differentil pressure p [br].0 0.5 0. 0.05 67 50 6... 67 50 6... / 67 504 6... 5 0 50 00 0 Volume flow V [l/min] 55 (.7) 7 (0.67) (.74) Removl lerne 0 (0.79) (0.47) R ø (0.4) (.6) 58 (.8) Prt no. Nominl flow rte [l/min] [gpm] (see pge 0) Dimensions in mm (Dimensions in ines) Weigt pprox. [kg] 67 50 6 06 67 50 6 06 67 50 6 06 67 504 6 6 (6.6) (0.6) (6.6) (0.6) W W 9 W W 9 M 0x.5 M 0x.5 G / G / 45 (5.7) 9 (7.56) 45 (5.7) 9 (7.56) 0.7 0.8 0.7 0.8 0

In-line oil filters wit single ed Operting pressure: 4 br, up to l/min (in-line) Tis design s te inlet nd te outlet on te side (in-line). Crteristis Flow resistne. to ISO 968 wit 6 mm /s..0 Servie inditor Differentil pressure p [br] 0.5 0. 0.05 67 50 6... 67 50 6... 67 506 6... 5 0 50 00 0 Volume flow V [l/min] e e Servie swit swivels by 60 e 7 (0.8) Removl lerne (.8) Fig. b b 5 (.09) 8 (.50) Fig. Fig. b Prt no. Fig. (see pges 0+) Dimensions in mm (Dimensions in ines) b ) e Servie indition Weigt pprox. [kg] Nominl flow rte up to l/min (6.6 gpm) 67 50 6 6 W 67 50 6 6 67 50 6 6 67 50 6 6 67 50 6 76 67 50 6 66 67 506 6 666 67 506 6 676 W W Nominl flow rte up to l/min (. gpm) W 9 W 9 W 9 Nominl flow rte up to l/min (8.5 gpm) 67 506 6 6 W 96/ W 96/ W 96/ (.74) (.74) (.74) (.57) (.57) (.57) (.57) (.57) (.57) (.87) (.87) (.87).5 (0.8).5 (0.8).5 (0.8).5 (0.8) 8.5 (.) 8.5 (.) 4 (0.94) 4 (0.94) 4 (0.94) 4 (0.94) 6 (.0) 6 (.0) G / G / G / G / G / G / G G G M 8 M 8 M 8 M 8 M 8 M 8 M 0 M 0 M 0 47 (5.79) 47 (5.79) 47 (5.79) 94 (7.64) 94 (7.64) 94 (7.64) 69 (0.59) 69 (0.59) 69 (0.59) (.8) 6 (.44) (.8) 6 (.44) (.8) 6 (.44).......6.6.7 ) Furter treds vilble on request.

In-line oil filters wit single ed Operting pressure: 4 br, up to 00 l/min (in-line) Crteristis Flow resistne. to ISO 968 wit 6 mm /s..0 Differentil pressure p [br] 0.5 0. 67 6 6... 0.05 5 0 50 00 0 Volume flow V [l/min] 50 (.97) Servie inditor G /4 G /4 56 (4.0) 08 (4.) Removl lerne (.8) (5.) (5.) (5.) (.87) 4 (.69) (.87) 4 (.69) (.87) M 0 M 0 8 8 (.0) Servie swit swivels by 60 8 8 (.0) M 0 Fig. Fig. Fig. Prt no. Fig. Nominl flow rte [l/min] [gpm] (see pge ) Dimensions in mm (Dimensions in ines) Servie indition Weigt pprox. [kg] 67 6 6 67 6 6 76 67 6 6 66 00 (6.4) 00 (6.4) 00 (6.4) W 0 W 0 W 0 (.8) 6 (.44).4.5.5

In-line duplex oil filters witout ngeover Operting pressure: 4 br, up to 80 l/min (in-line) Crteristis Flow resistne. to ISO 968 wit 6 mm /s..0 Differentil pressure p [br] 0.5 0. 67 5 6... 67 6 6... 0.05 5 0 50 00 0 Volume flow V [l/min] Servie swit swivels by 60 M 0 Fig. 7 (0.8) Removl lerne (.8) d M 0 b b Fig. M 0 b b Fig. Servie swit swivels by 60 Prt no. Fig. (see pge ) b Dimensions in mm (Dimensions in ines) ) d Servie indition Weigt pprox. [kg] Nominl flow rte up to 0 l/min (.7 gpm) 67 5 6 06 67 5 6 6 67 5 6 6 x W 96/ x W 96/ x W 96/ 00 (7.87) 00 (7.87) 00 (7.87) Nominl flow rte up to 80 l/min (47.6 gpm) 67 6 6 06 ) x W 0 67 6 6 6 ) 67 6 6 6 ) x W 0 x W 0 (0.6) (0.6) (0.6) (.57) (.57) 45 (.77) 45 (.77) (.87) 4 (.69) 4 (.69) (.76) 65 (.56) 65 (.56) (.87) (.87) (.76) (.76) G G G G / G / G / 08 (4.) 08 (4.) 08 (4.) 75 (0.8) 75 (0.8) 75 (0.8) 7 (.7) 7 (.7) 7 (.7) (.8) (.8) (.8) 5 (.8) 5 (.8) 5 (.8) (.8) 6 (.44) (.8) 6 (.44).5.6.6 4.6 4.7 4.7 ) Te filters re supplied witout speil wren profile. ) Furter treds re vilble on request.

In-line oil filters wit single ed Operting pressure: 0//5 br, up to 80 l/min (in-line) Servie inditor e e Servie swit swivels by 60 e b b 5 (.09) b d Removl lerne (.8) Fig. (.50) Fig. Fig. 8 Crteristis Flow resistne. to ISO 968 wit 6 mm /s..0 0.5 Differentil pressure p [br] 0. 67 50 6... 67 6... / 67 504 6... (WD 9) 67 504 6... (WD 9/) 67 506 6... 67 5 6... 67 8 6... 67 76 6... 67 7 6... / 67 7 6... 67 750 6... 0. 0.05 5 0 0 50 00 00 500 Volume flow V [l/min] 4

In-line oil filters wit single ed Operting pressure: 0//5 br, up to 80 l/min (in-line) Prt no. Fig. Nominl flow rte [l/min] ) [gpm] (see pge ) b Dimensions in mm (Dimensions in ines) ) d e Servie indition Weigt pprox. [kg] Operting pressure 5 br (.5 MP) 67 6 0 (5.8) WD 74/6 Operting pressure br (.5 MP) 67 50 6 67 50 6 6 67 50 6 06 67 504 6 46 67 504 6 456 67 504 6 4 67 504 6 67 504 6 67 504 6 6 67 506 6 756 67 506 6 696 67 506 6 656 67 506 6 6 (6.60) (6.60) (6.60) (0.57) (0.57) (0.57) (0.57) (0.57) (0.57) (8.49) (8.49) (8.49) (8.49) WD WD WD WD 9 WD 9 WD 9 WD 9/ WD 9/ WD 9/ WD 96 WD 96 WD 96 WD 96 Operting pressure 0 br (.0 MP) 67 8 6 ) 67 8 6 56 ) 67 8 6 66 ) 67 76 6 6 67 76 6 6 67 76 6 6 (.09) (.09) (.09) 80 (5) 80 (5) 80 (5) WD 74 WD 74 WD 74 WD 45 WD 45 WD 45 (.74) (.74) (.74) (.74) (.74) (.74) (.74) 5 (5.) 5 (5.) 5 (5.) 5 (5.) 5 (5.) 5 (5.) (.57) (.57) (.57) (.57) (.57) (.57) (.57) (.87) (.87) (.87) (.87) (.87) (.87) (.87) 56 (.0) 56 (.0) 56 (.0) 56 (.0) 56 (.0) 56 (.0).5 (0.85).5 (0.85).5 (0.85).5 (0.85) 8.5 (.) 8.5 (.) 8.5 (.) 8.5 (.) (.8) (.8) (.8) (.8) 4 (0.94) 4 (0.94) 4 (0.94) 4 (0.94) 6 (.0) 6 (.0) 6 (.0) 6 (.0) 6 (.0) 6 (.0) 6 (.0) 6 (.0) G / G / G / G / G / G / G / G G G G /4 G G G G /4 G /4 G /4 G /4 G /4 G /4 76 (.99) 6 6 6 6 6 6 M 8 M 0 9 (7.56) 49 (5.87) 49 (5.87) 49 (5.87) 96 (7.7) 96 (7.7) 96 (7.7) 0 (7.99) 0 (7.99) 0 (7.99) 7 (0.67) 7 (0.67) 7 (0.67) 7 (0.67) (9.69) (9.69) (9.69) 7 (4.6) 7 (4.6) 7 (4.6) 8 (.0) 8 (.0) 8 (.0) 8 (.0) 8 (.0) 8 (.0) (.8) 6 (.44) (.8) 6 (.44) (.8) 6 (.44) (.8) 6 (.44) (.8) 6 (.44) (.8) 6 (.44) 0.9 0.8 0.8 0.8..4.4 0.9.0.0.7.7.8.8.0...4.5.5 ) Furter treds vilble on request. ) Witout bypss vlve. ) Flow rtes re vlid for liquids wit 6 mm /s nd flow resistne ording to te digrm on pge 4.

In-line duplex oil filters witout ngeover Operting pressure: 0/ br, up to 60 l/min (in-line) 6 (.44) 5 (.09) Servie swit swivels by 60 X 0 (4.0) 0 (4.0) Fig. d Removl lerne pprox. (.8) Removl lerne (.8) d Fig. Fig.. (.87) 5 (.09) 60 (.6) 6 (.44) Servie swit swivels by 60 5 (.8) M 0 M 60 (6.) View X 80 (.5) Fig.. 4 (.69) M 0 (.87) (.57) Servie swit swivels by 60 4.9 (.69) M 50.8 (.00) 77.75 (.06) 0 (4.0) Prt no. Fig. (see pge ) Dimensions in mm (Dimensions in ines) ) d Permissible operting pressure [br] [MP] Servie indition Weigt pprox. [kg] Nominl flow rte up to 0 l/min (.7 gpm) ) 67 5 6 56 67 5 6 66 67 5 6 76... x WD 96 x WD 96 x WD 96 00 (7.87) 00 (7.87) 00 (7.87) G G G 77 (0.9) 77 (0.9) 77 (0.9) (.8) (.8) (.8).5.5.5.0.. Nominl flow rte up to 60 l/min (. gpm) ) 67 7 6 96 67 7 6 66 67 7 6 6 x WD 45 x WD 45 x WD 45 (.60) (.60) (.60) G G G 6 6 6 (5.8) (5.8) (5.8) 4 (.65) 4 (.65) 4 (.65) 0 0 0 6.8 6.9 6.9 ) Furter treds vilble on request. ) Flow rtes re vlid for liquids wit 6 mm /s nd flow resistne ording to te digrm on pge 4. 6

In-line triplex oil filters Operting pressure: 0 br, up to 5 l/min (in-line) 80 (.5) 60 (6.) X 55.5 (.9) 5 (.09) Servie swit swivels by 60 (.57) Connetion for servie inditor nd servie swit (.74) (.87) M 60 (6.) 60 (6.) View X 0 (4.) 50.8 (.00) Removl lerne (.8) d 6.5 (.50) 88.9 (.50) 6 (4.57) Fig. M Prt no. Fig. (see pge ) Dimensions in mm (Dimensions in ines) d Permissible operting pressure [br] [MP] Servie indition Weigt pprox. [kg] Nominl flow rte up to 5 l/min (4.7 gpm) ) 67 750 6 06 67 750 6 6 67 750 6 6 x WD 45 x WD 45 x WD 45 480 (8.) 480 (8.) 480 (8.) SAE SAE SAE 6 6 6 44.5 (6.7) 44.5 (6.7) 44.5 (6.7) 5.5 (.) 5.5 (.) 5.5 (.) 0 0 0 0. 0. 0. ) Flow rtes re vlid for liquids wit 6 mm /s nd flow resistne ording to te digrm on pge 4. 7

In-line duplex oil filters wit ngeover Operting pressure: 0/ br, up to 00 l/min Te ngeover funtion enbles filter mintenne witout brek in opertion. Crteristis Flow resistne. to ISO 968 wit 6 mm /s..0 7 d 8 (.50) 60 (6.) Differentil pressure p [br] 0.5 0. 0. 67 506 8... 67 6 8... Removl lerne (.8) 0.05 0 0 50 00 00 Volume flow V [l/min] (0.4) ø (0.4) 00 (.94) 00 (7.87) 5 (6.0) Fig. (.) 54 (.) 6.5 (.04) G (.6) 7 5 (.76) 8 (.9) 6 (.44) (.09) 94 (7.64) Fig. 80 (.5) 44 (.7) 7 (.06) G / 00 (7.87) M 6 (.44) 5 (.09) 5 (.8) Servie swit swivels by 60 Prt no. Fig. (see pges +) Dimensions in mm (Dimensions in ines) d Permissible operting pressure [br] [MP] Servie indition Weigt pprox. [kg] Nominl flow rte up to 80 l/min (.4 gpm) ) 67 506 8 76 ) 67 506 8 66 67 506 8 6 x WD 96 x WD 96 x WD 96 0 (4.0) 0 (4.0) 0 (4.0) 94 (.57) 94 (.57) 94 (.57) 50 (.97) 50 (.97) 50 (.97).5.5.5 4. 4. 4. Nominl flow rte up to 00 l/min (.7 gpm) ) 67 6 8 6 x W 0 ) 67 6 8 x W 0 ) 08 (4.) 08 (4.) (5.) (5.) 7 (4.69) 7 (4.69) 5 (.09) 5 (.09) 7 (.80) 7 (.80) 0 0 7. 7. ) Wit non-return vlve. ) Flow rtes re vlid for liquids wit 6 mm /s (St) nd flow resistne of 0.4 up to 0.6 br ( up to 60 kp). Te nominl flow rte per filter lf is indited. ) Cngeover lever spnner size 4, order no. 0 086 0 04. 8

ZUR REINIGUNG DREHEN In-line duplex oil filters wit ngeover Operting pressure: 0 br, up to 80 l/min Crteristis Flow resistne. to ISO 968 wit 6 mm /s..0 Differentil pressure p [br] 0.5 0. 0. 67 7 8... d 8 (.50) 5 (.09) 00 (7.87) 0.05 0 0 50 00 00 Volume flow V [l/min] Removl lerne (.8) 60 (6.) 60 (6.) 9 (.6) 9 (6.) 4.9 (.69) 77.8 (.06) 77.8 (.06) ø 50.5 (.99) ø 8 (0.7) ø 50.5 (.99) 5 (.8) 0 (4.06) 9 (6.) 9 (.6) 4.9 (.69) ø 8 (0.7) 5 (.8) 0 (4.06) M M Servie swit swivels by 60 9 Fig. (.58) Fig. 07 (4.) Prt no. Fig. (see pge ) Dimensions in mm (Dimensions in ines) d Permissible operting pressure [br] [MP] Servie indition Weigt pprox. [kg] Nominl flow rte bis 80 l/min (47.6 gpm) ) 67 7 8 06 ) 67 7 8 6 ) 67 7 8 6 ) x WD 45 x WD 45 x WD 45 6 6 6 60 (6.) 60 (6.) 60 (6.) 44 (6.69) 44 (6.69) 44 (6.69) 5 (.05) 5 (.05) 5 (.05) (.76) (.76) (.76) 0 0 0 9.7 9.8 9.8 ) On request vilble wit ounter flnge (wit srews nd spring wser), order no. 078 0. ) Flow rtes re vlid for liquids wit 6 mm /s (St) wit flow resistne of 0.4 up to 0.6 br ( up to 60 kp). Te nominl flow rte per filter lf is indited. 9

In-line oil filters wit single ed (sution rnge) Operting pressure: 0.8 br, up to 85 l/min (in-line) Sution filters re primrily used in ydruli systems on te sution side of te feed pump. Typil pplition res inlude griulturl mines wit teir ompreensive mobile ydrulis. Sution filters re designed to ieve low pressure drop. Filter monitoring is mde vi te optionlly vilble MANN+HUMMEL low pressure swit or troug differentil pressure monitoring. Notes for instlltion: No ross-setion onstrition of te sution line to te onnetion on te filter ed No dditionl pressure drop su s wit fittings nd redireted lines Hig pressure pump In-line filter oil pressure rnge Feed pump In-line filter oil sution rnge Tnk

In-line oil filters wit single ed (sution rnge) Operting pressure: 0.8 br, up to 85 l/min (in-line) Crteristis Flow resistne. to ISO 968 wit 6 mm /s. Differentil pressure p [br] 0. 0. 0.05 0.04 0.0 0.0 67 8 6... 0.0 0 50 60 00 00 Volume flow V [l/min] X 8 (.0) G /4 View X M 0 77 (6.97) 5 (5.) 56 (.0) Removl lerne 0 (0.79) 5 (5.) Prt no. (see pge ) Dimensions in mm (Dimensions in ines) Servie indition Nominl flow rte up to 85 l/min (. gpm) 67 8 6 76 W 74/4 ) 67 8 6 86 W 74/4 ) 67 8 6 56 W 74/4 ) 67 8 6 00 W 74/6 ) 67 8 6 0 W 74/6 ) 67 8 6 0 W 74/6 ) (.8) (.8) (.8) (.8) 6 (.0) 6 (.0) 6 (.0) 6 (.0) (9.69) 6 (.) (.99) (9.69) 6 (.) (.99) ) Spin-on filter wit bypss vlve, opening pressure 0. + 0.5 br (0 + 5 kp). Furter treds vilble on request.