Power supplies and transformers

Transcription

1 pges 14054/2 to 14054/5 pges 14058/2 nd 14058/3 Presenttion ABL-iR power supplies The ABL-iR rnge of power supplies is designed to provide the d.. voltge neessry for the ontrol iruits of most ontrol system equipment. Split into five fmilies, this rnge meets ll the needs enountered in industril, ommeril nd residentil pplitions. Whether they re single-phse or 3-phse, eletroni swith mode or onventionl type with retifier, they provide qulity of output urrent whih is suitble for the lods supplied nd omptible with the mins supply vilble in the equipment. Cler guidelines re given on seleting protetion devies whih re often used with them, nd thus omprehensive solution is provided whih n be used in totl sfety. Phseo swith mode supplies Swith mode power supplies re totlly eletroni nd regulted. The use of eletronis mkes it possible to signifintly improve the performne of these power supplies, whih offer: - ompt size, - integrted overlod, short-iruit, overvoltge nd undervoltge protetion, - very wide rnge of permitted input voltges, without ny djustment, - high degree of output voltge stbility, - good performne, - onsiderbly redued weight. Phseo power supplies re vilble in single-phse nd 3-phse versions. They supply voltge whih is preise to 3%, whtever the lod nd whtever the type of mins supply, within rnge of 85 to 364 V for single-phse, or 360 to 55 for 3-phse. Conforming to IEC stndrds nd UL nd CSA pproved, they re suitble for universl use. The inlusion of overlod nd short-iruit protetion mkes downstrem protetion unneessry if disrimintion is not required. The produts re lso equipped with n output undervoltge ontrol whih uses the produt to trip if the output voltge drops below 19 V, in order ensure tht the voltge supplied is lwys usble by the tutors being supplied. All the produts re fitted with n output voltge djustment potentiometer (in the rnge 24 to 28.8 V) in order to be ble to ompenste for ny line voltge drops in instlltions with long ble runs. These power supplies re designed for diret mounting on 35 mm nd 75 mm " rils. These power supplies re vilble in single-phse nd 3-phse versions nd re split into three fmilies: i The ABL-7RE fmily inludes produts tht re exellent for typilly industril pplitions. They re extremely ompt nd very esy to instll, s well s being ttrtively pried. i The ABL-7RP fmily of produts is more generl-purpose. These supplies re fitted with n input filter (PFC) whih enbles them to be used in ommeril nd residentil environments (onforming to stndrd IEC ). In ddition, they offer two operting modes for deling with overlods nd short-iruits: - AUTO mode whih ensures utomti restrting of the supply s soon s the fult is lered; - MANU mode whih requires the supply to be reset before restrting is possible. Resetting is hieved by swithing off the mins supply (on the produt). i The ABL-7RU fmily, for use on 3-phse mins supplies, is designed for pplitions tht inlude high onsumption lods. They n supply up to 960 W, in both industril nd ommeril environments. Filtered retified power supplies Filtered retified power supplies re built using sfety trnsformer fitted with bridge retifier nd filter pitors. With no regultion system, of simple nd rugged onstrution, their output voltge will withstnd mins voltge vritions nd lod vritions while remining within the rnge defined in stndrds IEC They re prtiulrly suitble for pplitions with high urrent inrush. These supplies re split into two fmilies: i The single-phse filtered retified ABL-6RF fmily is suitble for onnetion to Europen 230/40 nd Amerin 120/ 24 single-phse supplies. An optionl mounting plte for mounting on " ril, simplifies their instlltion. i The 3-phse filtered retified ABL-6RT fmily is prtiulrly suitble where high power level is required for tutors nd pretutors. In prtiulr, for All 24 V equipment, or for ontrolling d.. vlves nd solenoid vlves /2 Te

2 pges 14054/2 to 14054/5 pges 14058/2 nd 14058/3 Presenttion Using 24 V i Using 24 V enbles so-lled protetion instlltions (PELV) to be built. Using PELV is mesure designed to protet people from diret nd indiret ontt. Mesures relting to these instlltions re defined in publition NFC nd in stndrd IEC i The pplition of these mesures to the eletril equipment in mhines is defined in stndrd NF EN nd requires : - tht the voltge used is below 6 d.. in dry environments nd below 3 in dmp environments. - the onnetion of one side of the PELV iruit, or one point of the soure, to the equipotentil protetion iruit ssoited with higher voltges. - the usge of swithger nd ontrol ger on whih mesures hve been tken to ensure "sfety seprtion" between power iruits nd ontrol iruits. i A sfety seprtion is neessry between power iruits nd ontrol iruits in PELV iruits. Its im is to wrn of the pperne of dngerous voltges in 24 V sfety iruits. i The referene stndrds involved re : - IEC 742, EN 60742, DIN/VDE 0551 T1 (sfety trnsformers). - IEC 664 (oordintion of isoltion). Telemenique power supplies meet these requirements. i Moreover, to ensure tht these produts will operte orretly in reltion to the demnds of the reinfored isoltion, it is reommended tht the produts be mounted nd wired s indited below : - they should be pled on n erthed mounting plte or ril, - they should be onneted using flexible bles, with mximum of two wires per onnetion, nd tightening to nominl torque, - ondutors of the orret insultion lss must be used. i If the d.. iruit is not onneted to n equipotentil protetion ondutor, n erth lekge detetor will indite ny identl insultion fults (see tlogue Mesurement nd ontrol relys" n 29709). Operting voltge i The eptble tolernes for the operting voltge re listed in publitions IEC nd DIN i For nominl voltge Un = 24 V, the extreme operting vlues re from - 15 % to 20 % of Un, whtever the supply vritions my be in the rnge - 10 % to 6 % (defined by stndrd IEC 38) nd lod vritions in the rnge In 0-100%. Consequently the vlues re s follows : - mximum voltge (pek) : 3 - nominl voltge : 24 V - minimum voltge (pek) : 19.2 V All Telemenique 24 V supplies hve been designed to provide voltge within this rnge. i It my be neessry to use voltge mesurement rely to detet when the norml voltge limits re being surpssed nd to del with the onsequenes of this (see tlogue n 29709). Te14053/3

3 pges 14054/2 to 14054/5 pges 14058/2 nd 14058/3 Seletion Seletion of power supplies The hrteristis to be tken into ount when seleting power supply re : - the required output voltge nd urrent, - the mins voltge vilble in the instlltion. An initil seletion n be mde using the tble below. This my however result in severl produts being seleted s suitble. Other seletion riteri must therefore be tken into ount. i The qulity of the mins power supply Filtered retified power supplies provide non-regulted voltge, sensitive to lod nd mins power supply flututions. They n only be used where good qulity mins supply is vilble, with flututions limited to -10%...10% of the nominl vlue. Grphs showing the output voltge s funtion of the rted urrent of the lod nd the input voltge for ABL-6RF nd ABL-6RT supplies re given on pge 14054/5. If the qulity of the mins supply is not suitble for retified power supply, regulted supply must be used. The Phseo rnge is the solution beuse it gurntees preision to 3% on the output voltge, whtever the lod urrent nd the input voltge. In ddition, the wide input voltge rnge of Phseo power supplies llows them to be onneted to ll mins supplies within the nominl rnge, without ny djustment. The Phseo RP fmily n lso be onneted to 110 nd 22 emergeny supplies. i Hrmoni pollution (power ftor) The urrent drwn by power supply is not sinusoidl. This leds to the existene of hrmoni urrents whih pollute the mins supply. Europen stndrd EN limits the hrmoni urrents produed by power supplies. This stndrd overs ll devies of more thn 75 W, drwing up to 16 A per phse, nd onneted diretly to the publi mins power supply. Devies onneted downstrem of privte, low voltge, generl trnsformer re therefore exluded. By design, retified power supplies produe very little hrmoni urrent nd n therefore be used on the publi mins supply. However, swith mode supplies produe muh more hrmoni urrent nd filter iruit (Power Ftor Corretion or PFC) must therefore be dded to omply with stndrd EN Power supplies ABL-6RF, ABL-6RT nd Phseo ABL-7RP nd ABL-7RU onform to stndrd EN nd n therefore be onneted diretly to publi mins power supplies. i Behviour in the event of short-iruits In the event of n overlod or short-iruit, retified power supplies must be proteted by n upstrem fuse or iruit breker to prevent their destrution. Models ABL-6RF2401, ABL-6RF2402 nd ABL-6RF2405 re fitted, s stndrd, with 5 mm x 20 mm glss fuse. Phseo power supplies, on the other hnd, re fitted with eletroni protetion. This protetion utomtilly resets s soon s the fult is lered, so voiding the need to tke tion or reple fuse. In ddition, with the Phseo RP rnge, the user n selet the reset method in the event of fult: - in the "AUTO" position, resetting is utomti, - in the "MANU" position, resetting will tke ple fter the fult hs been lered nd fter the mins power hs been swithed off nd bk on (on the power supply). This feture mens tht Phseo RP n be used in instlltions where the risks ssoited with sudden restrting re high /4 Te

4 pges 14054/2 to 14054/5 pges 14058/2 nd 14057/3 Seletion Seletion tble ording to pplition hrteristis Tehnology Regulted swith mode Filtered retified Rted mins supply voltge /60 Hz x x40 ± ± ± /60Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Wide rnge Wide rnge Wide rnge Permissible vrition V, Hz V /-10 % V Hz Hz Hz Output voltge 12 V 48 V 24 V 24 V Output urrent 1 A ABL- ABL- 6RF2401G2 6RF A ABL- 7RE A ABL- ABL- 6RF2402G2 RF A ABL- ABL- ABL- 7RP4803 7RP2403 7RE A ABL- ABL- ABL- ABL- ABL- 7RP1205 7RP2405 7RE2405 6RF2405G2 6RF A ABL- ABL- ABL- ABL- ABL- 7RP2410 7RE2410 7RU2410 6RF2410 6RT A ABL- 6RF A ABL- ABL- ABL- 7RU2420 6RF2420 6RT A ABL- ABL- 7RU2430 6RT A ABL- ABL- 7RU2440 6RT2440 EN Yes No Yes Yes Yes Integrted protetion Yes Yes Yes from 1 to 5 A by fuse No Automti or mnul restrt Automti restrt No bove 5 A Fult memory Yes No No Not pplible Not pplible Referene ABL-7RP ABL-7RE ABL-7RU ABL-6RF ABL-6RT Te14053/5

5 pges 14058/2 nd 14058/3 Phseo regulted swith mode power supplies Chrteristis Tehnil hrteristis Type of power supply ABL-7RE ABL-7RP ABL-7RU Approvls UL508, CSA 22.2 n 950, TÜV UL508, CSA 22.2 n 950 Conforming to stndrds Sfety IEC 950 EMC EN , IEC (EN ) Low frequeny hrmoni urrents EN Input iruit Input voltges Rted vlues V , x Permissible vlues V single-phse single-phse phse Permissible frequenies Hz Effiieny t nominl lod > 85 % > 90 % Current t swith-on A < 30 < 10 Power ftor Output iruit Preision Output voltge Adjustble, from 100 to 120 % Line nd lod regultion ± 3 % ± 1 % Residul ripple - interferene mv < 200 Miro-breks Holding time t I mx nd Ve min ms > 10 > 20 > 3.3 Overlods Permissible pek urrent Unlimited for 100 ms Protetion Permnent/utomti Permnent/utomti restrt or Permnent/utomti Short-iruit restrt mnul restrt on produt restrt Overlod 1.1 In 1.1 In Overvoltge Tripping if U > 1.5 Un Undervoltge Tripping if U < 0.8 Un Opertionl nd environmentl hrteristis Connetions input mm 2 2 x 2.5 erth 3 x 2.5 erth output mm 2 2 x 2.5 erth, multiple output, depending on model 4 x 10 erth Ambient onditions Storge temperture C Operting temperture C C (derting s from 55 C) Mximum reltive humidity 95 % without ondenstion or dripping wter Degree of protetion IP 20 onforming to IEC529 Vibrtions Conforming to EN Operting position Vertil MTBF > h (Conforming to Bell Core, t 40 C) Connetions Series Possible Prllel Possible (mximum temperture 50 C) Dieletri strength Input/output 300/50 Hz 1 min 375/50 Hz 1 min Input/erth 300/50 Hz 1 min 350/50 Hz 1 min Output/erth (nd output/output) 50/50 Hz 1 min 50/50 Hz 1 min Input fuse inorported Yes, not interhngeble No Emissions EN (Generi) Conduted/rdited EN55011/EN55022 l.b Immunity IEC (Generi) Eletrostti dishrge EN (4 kv ontt/8 kv ir) Eletromgneti EN level 3 (1/m) Conduted interferene EN level 3 (2 kv), EN , EN level 3, EN level 4. Mins interferene EN (Voltge drops nd uts) 14054/2 Te

6 pges 14058/2 nd 14058/3 Retified power supplies Chrteristis Type of power supplies ABL-6RT ABL-6RF i 2402i 2405i Tehnil hrteristis Input All produts: Input voltges Permissible vlues V phse ( %) 230 or 400 single-phse ( %) with 5 % nd - 5 % with - nd onnetors onnetors exept ABL-6RF24iiG2 : 120 or 240 single-phse ( %) with - nd onnetors Permissible frequenies Hz Effiieny (1) % Output Preision Output voltge V 24 nominl 24 nominl Min : 20.4; Mx : 28.8 Min : 20.4; Mx : 28.8 Output urrent A Residul ripple (1) 2 % 5 % Protetion Overlod nd short-iruit Externl, depending on Externl, depending on output urrent, output urrent exept ABL-6RF2401i, ABL-6RF2402i, ABL-6RF2405i : 5 x 20 internl fuse Environment Trnsient output overvoltge Pek limiter 2 J Pek limiter 2 J Connetions Input mm 2 1 x 4 erth 1 x 4 erth Output mm 2 2 x 4 erth 2 x 4 2 x 16 erth Ambient ir temperture Storge C round the devie Opertion C Mximum reltive humidity 90 % without ondenstion or dripping wter Degree of protetion IP 20 Protetive tretment TC Operting position All positions Vertil Dieletri strength Input/output V 4000 Input/erth V 2000 Output/erth V 2000 Connetions Series Possible Prllel Possible, with 20 % derting Conforming to stndrds EN 60742; UL 1950; IEC ; CSA-C22.2 N 234 or 950 DIN Approvls, (1) At nominl input voltge nd lod Te14054/3

7 pges 14054/2 to 14054/5 pges 14058/2 nd 14057/3 Phseo regulted swith mode power supplies Output hrteristis Derting The mbient temperture is determining ftor whih limits the power tht n eletroni power supply n deliver ontinuously. A temperture whih is too high round the eletroni omponents signifintly redues their life. However, if the mbient temperture remins lrgely below the rted operting temperture, then power supply n deliver more thn its nominl power. The rted mbient temperture for Phseo power supplies is 50 C. Below this, n inrese in rting is possible up to 120% of the nominl power. Above 50 C, derting is neessry up to mximum temperture of 60 C. The grph below shows the power (in reltion to the nominl power) whih the power supply unit n deliver ontinuously, ording to the mbient temperture. P/Pn (%) Mximum opertionl temperture ( C) Derting should be onsidered in the following extreme operting onditions: - intensive opertion (output urrent permnently lose to the nominl urrent, ombined with high mbient temperture), - output voltge set bove 24V (to ompenste for line voltge drops, for exmple), - prllel onnetion to inrese the totl power. Phseo RE Phseo RP Phseo RU Intensive opertion Without derting, from 0 C to 50 C Without derting, from 0 C Derting of nominl urrent by 1% per dditionl C to 60 C up to 60 C Rise in output voltge The nominl power is fixed. Inresing the output voltge mens tht the urrent delivered must be redued. Prllel onnetion to inrese the power The totl power is equl to the sum of the powers of the power supplies used, but the mximum mbient temperture for opertion is 50 C. To improve het dissiption, the power supplies must not be in ontt with eh other. In ll ses, there must be dequte onvetion round the produts to ensure esier ooling; There must be ler spe of 50 mm bove nd below Phseo power supplies nd of 15 mm t the sides /4 Te

8 pges 14054/2 to 14054/5 Retified power supplies Output hrteristis Exmple using the grph 3 21 V 0 A 1 A A 3 A 4 A 5 A 6 A For n ABL-6RF2405 power supply used with vrible lod of 1 to 5 A on mins supply with Un ±10%, the grph shows the limits t the lod terminls : 21 nd 3. Note : permitted lods re represented vertilly s imges of the rted lod urrent t rted voltge. 1 Rted supply 10% 2 Rted supply 3 Rted supply -10% Rted lod urrent (t 24 V) ABL-6RF2401/G2 ABL-6RF2405/G A 0,2 A 0,4 A 0,6 A 0,8 A 1 A 1,2 A A 1 A 2 A 3 A 4 A 5 A 6 A ABL-6RF2410 ABL-6RF A 8 A 16 A 24 A 32 A 40 A 48 A A 3 A 6 A 9 A 12 A 15 A 18 A ABL-6RF A 4 A 8 A 12 A 16 A 20 A 24 A ABL-6RT2410 ABL-6RT A 2 A 4 A 6 A 8 A 10 A 12 A A 4 A 8 A 12 A 16 A 20 A 24 A ABL-6RT2430 ABL-6RT A 5 A 10 A 15 A 20 A 25 A 30 A 35 A A 8 A 16 A 24 A 32 A 40 A 48 A Te 14054/5

9 pges 14058/2 nd 14058/3 Upstrem protetion for Phseo regulted swith mode power supplies Seletion ABL-7RU, ABL-7RE nd ABL-7RP power supplies: protetion of the power supply line Type de supply 40 3-phse 48 3-phse Type of protetion Therml-mgneti Fuse Therml-mgneti Fuse iruit-breker iruit-breker 3-pole GV2-RT C60N GV2-RT C60N ABL-7RU2410 GV2-RT05 MG A M GV2-RT04 MG A M djustment 0.63 djustment 0.5 A ABL-7RU2420 GV2-RT06 MG A gg GV2-RT05 MG A gg djustment 1A djustment 0.8 A ABL-7RU2430 GV2-RT06 MG A gg GV2-RT06 MG A gg djustment 1.2 djustment 1 A ABL-7RU2440 GV2-RT07 MG A gg GV2-RT06 MG A gg djustment 2 A djustment 1.5 A Type of supply 1 single-phse 23 single-phse Type of protetion Therml-mgneti gg fuse Therml-mgneti gg fuse iruit-breker iruit-breker Single-pole GB2-CBii 2-pole GB2-DBii C60N GB2-DBii C60N ABL-7RE2402 GB2-iB07 MG A GB2-DB06 MG A ABL-7RE2403 GB2-iB07 MG A GB2-DB06 MG A ABL-7RE2405 GB2-iB08 MG A GB2-DB07 MG A ABL-7RE2410 GB2-iB12 MG A GB2-DB08 MG A ABL-7RP2403 GB2-iB07 MG A GB2-DB07 MG A ABL-7RP2405 GB2-iB07 MG A GB2-DB07 MG A ABL-7RP2410 GB2-iB09 MG A GB2-DB07 MG A ABL-7RP4803 GB2-iB07 MG A GB2-DB07 MG A 14055/2 Te

10 pges 14058/2 nd 14058/3 Power supplies for.. ontrol iruits Upstrem protetion for retified power supplies Seletion ABL-6RT power supplies: protetion of the power supply line Type of supply 40 3-phse Type of protetion Therml-mgneti Therml C60N FNQ fuse M fuse 3-pole regultion UL listed (1) iruit-breker ABL-6RT2410 GV2-RT A MG A T 2 A ABL-6RT2420 GV2-RT A MG A T 4 A ABL-6RT2430 GV2-RT07 2 A MG A T 4 A ABL-6RT2440 GV2-RT A MG A T 4 A ABL-6RF power supplies: protetion of the power supply line Type of supply 23 single-phse 40 single-phse Type of protetion Therml-mgneti MDL fuse M fuse Therml-mgneti FNQ fuse M fuse iruit-breker UL listed (1) iruit-breker UL listed (1) Single-pole GB2-CBii 2-pole GB2-DBii C60N GB2-DBii C60N ABL-6RF2401 GB2-iB05 MG A T 0.5 A MG 0.15 A T 0.5 A ABL-6RF2402 GB2-iB06 MG 0.63 A T 0.5 A GB2-DB05 MG 0.3 A T 0.5 A ABL-6RF2405 GB2-iB07 MG 1.4 A T 2 A GB2-DB06 MG 0.6 A T 1 A ABL-6RF2410 GB2-iB09 MG 3.15 A T 4 A GB2-DB07 MG 1.25 A T 2 A ABL-6RF2415 GB2-iB10 MG 5 A T 6 A GB2-DB08 MG 2 A T 4 A ABL-6RF2420 GB2-iB14 MG 6 A T 6 A GB2-DB14 MG 2.5 A T 6 A (1) For opertion onforming to UL Te14055/3

11 pges 14054/2 to 14054/4 pges 14058/2 nd 14058/3 Phseo regulted swith mode power supplies Referenes 3-phse regulted swith mode power supplies ABL-7RU Mins Output Nominl Nominl Automti Complies with Referene Weight input voltge voltge power urrent protetion stndrd Hz reset EN V V W A kg uto yes ABL-7RU phse wide rnge uto yes ABL-7RU uto yes ABL-7RU2430 (1) ABL-7RU uto yes ABL-7RU2440 (1) Single phse regulted swith mode power supplies ABL-7RE Mins Output Nominl Nominl Automti Complies with Referene Weight input voltge voltge power urrent protetion stndrd Hz reset EN V V W A kg uto no ABL-7RE single phse wide rnge 72 3 uto no ABL-7RE ABL-7RE2405 ABL-7RP2405 ABL-7RP uto no ABL-7RE uto no ABL-7RE Single phse regulted swith mode power supplies ABL-7RP Mins Output Nominl Nominl Automti Complies with Referene Weight input voltge voltge power urrent protetion stndrd Hz reset EN V V W A kg uto/mn yes ABL-7RP single phse wide rnge uto/mn yes ABL-7RP uto/mn yes ABL-7RP uto/mn yes ABL-7RP uto/mn yes ABL-7RP (1) Avilble : 3rd qurter /2 Te

12 pges 14054/2 to 14054/5 pges 14058/2 nd 14058/3 Filtered retified power supplies Referenes Three phse filtered retified power supplies (1) Mins Nominl Nominl Mximum Referene Weight input voltge output power output 50/60 Hz voltge urrent V V W A kg ABL-6RT (±10%) three phse ABL-6RT ABL-6RT ABL-6RT Single phse filtered retified power supplies (1) Mins Nominl Nominl Mximum Protetion Referene Weight input voltge output power output per rtridge 50/60 Hz voltge urrent fuse 5 x 20 V V W A kg ABL-6RTiiii With ABL-6RF2401 (2) (±10%) With ABL-6RF2402 (2) (±10%) single phse With ABL-6RF2405 (2) Without ABL-6RF Without ABL-6RF Without ABL-6RF ABL-6RFiiii With ABL-6RF2401G2 (2) (±10%) With ABL-6RF2402G2 (2) (±10%) single phse With ABL-6RF2405G2 (2) Mounting essories Desription For Sold in Referene Weight power supplies lots of kg Plte for mounting (2) ABL-6RF2401i 5 ABL-6AM on 35 mm Omeg or ombintion ril ABL-6RF2402i 5 ABL-6AM ABL-6RF2405i 5 ABL-6AM Mrking essories Desription Size Sold in Referene Weight mm lots of kg AR1-SB3 Self-dhesive 20 x AR1-SB mrker tg holder (1) Seprte protetion nd sfety devie : see reommended produt referenes pge 14055/2. (2) It is possible to order power supply with its orresponding mounting plte. To do this, dd the letter P to the referene of the seleted power supply (exmple : ABL-6RF2401P). Te14056/3

13 pges 14054/2 to 14054/5 pges 14058/2 nd 14058/3 Dimensions ABL-7RU24i0 L1 L2 L3 b ON ,8VDC ABL-7RU b ABL-7RE24ii/ABL-7RPiiii 7RE2402/2403 7RE2405 7RE2410 Common side view 7RP2403 7RP1205/2405/4803 7RP2410 Clip-on mounting on 35 nd 75 mm rils /2 Te

14 pges 14054/2 to 14054/5 pges 14058/2 nd 14058/3 Dimensions ABL-6RT24i0 Mounting pltes ABL-6AM0i Ø b 4 x Ø J G ABL- b G J Ø ABL- b Ø 6RT AM RT AM RT AM RT ABL-6RF24ii ABL-6RF2420 b 162 b 4 x Ø 4 x Ø 7 J G 122,8 8,7 18,5 148, ABL- b G J Ø 6RF2401i RF2402i RF2405i RF RF Te 14057/3

15 pges 14054/2 to 14054/5 Shemes ABL-7RU24i0 N L L1 L2 L3 Filter ABL-7RE2402/2403 ABL-7RE2405 ABL-7RE2410 N L N L N L ABL-7RP2403 ABL-7RP1205/2405/4803 ABL-7RP2410 N L Filter Filter Filter N L 14058/2 Te

16 pges 14054/2 to 14054/4 Shemes ABL-6RT24i0 5 % L1 5 % 5 % L2 5 % 5 % L3 5 % 24 V 24 V ABL-6RF2401, ABL-6RF2402, ABL-6RF2405 ABL-6RF2410, ABL-6RF2415, ABL-6RF V 24 V 40 F1 24 V V ABL-6RF2401G2, ABL-6RF2402G2, ABL-6RF2405G F1 24 V 24 V Te14058/3