Decor Radiators Baseboard

Similar documents
Radiator Range Technical Specifications

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

Electrically controlled directional control poppet valve type UREZ6

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

Product range MEGAlife

Kit Description. to 3 / 4. VG7xxxxT Two- and Three-Way Globe Valves. VG7xxxxS, VG7xxxxT, and VTM Twoand Three-way Globe Valves / 4

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

All the work described in sections A, B, C, D, and E must be carried out in full before the wheel/tyre combination may be used.

Kit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves

FRONT SIDE FIX WINDOW

Two-Position Electric Duplex Room Thermostats

SHEET 1 OF 6

UNIVERSAL ALUMINIUM CASE

1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Brazed heat exchanger XB

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL

ELECTRICAL SYSTEM 4 D INSTRUMENTATION

Designed for. Irismo & Glydea SOLUTIONS FOR MOTORIZED DRAPERIES Irismo 45 WireFree RTS Irismo 35 Mini DC Glydea 35e Glydea 60e.

BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve

REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration.

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES

PREFILL AND EXHAUST VALVE PV 100 TO PV 200

INSTALLATION INSTRUCTIONS READ "SAFETY MANUAL" AND "USER MANUAL" BEFORE STARTING THE UPS INSTALLATION LAYOUT INFORMATION FANS FANS REMOVIBILE COVER

Directional Valve Size 06 WL 4.06

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

Cast stone collection 2014 bathtubs, washbasins, shower trays

6/2 way directional valve type 6/2UREM6 and 6/2URMM6

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

Commercial Condensing Units

HYDROLUME LED STRIP LIGHT

PERSEUS ULTRA LOW PRESSURE

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

SSAB Water mains PIPES AND FITTINGS


WINDSHIELD / WINDOWGLASS

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

Boiler room components 0861EN April 2017 Distribution and regulation units

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")

Lincoln Under-cabinet Light Installation Instructions

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

CS 7780 FULL FUNCTION DRIVE-UP TERMINAL

2/2 Solenoid Operated Seat Valve, ISO Size 03

Directional Valve Size 04 WL 4.04

Murtfeldt Internet Chain Tensioners for Roller Chains to DIN8187

Cable Trolleys for C-Rails Program

HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

4/2- and 4/3-way shut-off valve

FINGER STRIPS. and other EMI shielding products. Characteristics

152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:

Conversion to 235/45 R 17 tyres and 8 J x 17 H 2 ET 28 disk wheel 40.01

Directional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.

BASIC SPECIFICATIONS AND DIMENSIONS - DESIGNER MODELS

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

COLLECTION OF CAST STONE PRODUCTS

@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10

631 ALLOWANES AND TOLERANCES

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

TECHNICAL INSIGHT INTERNAL CLEARANCE - TYPES AND NORMS

Spring Return DuraDrive Two-Position Actuator

AWWA Grooved Fittings

HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version

CREEK Technical Services, LLC

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits

TS1.5 Flat Base Pole Spacing 8mm (.315) Mounting Hole Diameter 2.8mm (.110) Stripping Length 5mm (.197)

Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4

Control stations and enclosures

Aluminium Floor Outlets - Trapped Outlets

ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800

GUARDIAN VERTICAL MOUNTING

K*ES120 DESCRIPTION TECHNICAL GUIDE SPLIT-SYSTEM EVAPORATOR BLOWERS 10 NOMINAL TONS EER 8.5 ACCESSORIES FIELD INSTALLED TABLE 1: ARI RATINGS*

Radiant Process Heaters. Gemini. Medium Wave Heaters Twin Bore Quartz Tube Technology

Section 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class

CEW SERIES CEILING EXPOSED HORIZONTAL FAN COIL UNITS

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

Metering pumps LK series

Data Sheet T /4/5/6 EN

MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.

Molded Interior Door Cambridge. Product Detail Sheets Table of Contents

JET PUMP. Table of Contents. Section 5 - Jet Pump

OPTIVENT ULTRA VAV damper TECHNICAL DATA

Glydea TM Range. Motorization for draperies

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids

DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor

Transcription:

Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high. Rditor 11 (with fins) Avilble in outputs from,565 to 16,156 Btu/hr; 6, 8 nd 10 tubes high. 22 (with fins) Avilble in outputs from 6,25 to 28,91 Btu/hr; 6, 8 nd 10 tubes high. Verticl Decor Column Decor Verticl V10 Avilble in outputs from 6,648 to 11,079 Btu/hr; 6, 8 nd 10 tubes. Column TS4 Avilble in outputs from 7,110 to 18,66 Btu/hr; 8, 11, 1, 16, 18 nd 21 tubes with 1 5 /8" between tubes. With five distinctive Decor styles to choose from Bsebord, Pedestl, Rditor, Verticl Decor nd Column Decor there is model to enhnce the look of ny interior. Myson Decor Rditors hve the style, qulity of construction nd finish to be used with confidence in the most prestigious settings. 18 Myson, Inc. 800-698-9690 www.mysoninc.com

Generl Specifictions DECOR APPROVA AND CERTIFICATION All Myson Decor Rditors re mnufctured nd tested to EN 442. PAINT FINIS Every rditor undergoes multi stge pre-tretment process followed by n epoxy polyester primer coting. A bked epoxy polyester powder cot in white (RA 9010) is pplied to ll front nd rer surfces llowing the Myson Decor Rditor to be fitted without further pinting. APPICATION Myson Decor Rditors re for use with hot wter pplictions only. Their pplictions re for use with two pipe pumped indirect domestic nd centrl heting instlltions. The system should be designed with prticulr cre tken to void ir entry or wter dischrge. We do not recommend the use of single feed indirect cylinders, s the possibility of ertion due to wter interchnge my led to corrosion. The instlltion work must be crried out in ccordnce with recognized good prctice, nd precutions tken to void contmintion which could led to corrosion. If corrosion inhibitor or other wter tretment is to be used, the mnufcturer s instructions must be strictly followed. TUBE DIMENSIONS eders: Tringulr 2" x 1 5 /8" x 1 5 /8" eder thickness: 1. eting tubes: 2 /4" x 7 eting tube thickness: 1 /8". WATER CONNECTIONS Stock Rnge: Type Connections V T PRESSURE 4 x 1 /2 inch including plug nd vent. 2 x 1 /2 inch BOE including plug nd vent. 2 x 1 /2 inch BOE including plug nd vent. All Decor Rditors re pressure tested to 87 psi during mnufcture. Mximum working pressure: 66 psi. Dimensions The chosen rditor must lwys hve one of its two dimensions less thn or equl to 47 1 /4". EAT OUTPUTS The tbulted figures re quoted t n verge wter temperture (AWT) of 215 F, nd n entering ir temperture (EAT) of 65 F. Correction fctors for other temperture differences re on pge 26. MOUNTING BRACKETS All Decor Rditors re supplied with the pproprite stndrd brckets. Mounting feet for floor mounting nd support for ceiling mounting re supplied seprtely to order. Myson, Inc. 800-698-9690 www.mysoninc.com 19

11 Bsebord (with fins) 2 /4" 2 Tube 6 Inch ength Output Product Weight Wter (in) (Btu/hr) Code (lbs) Content (gls) 5 24 1561 211060 7.0 0.24 6 241 211090 10.5 0.6 48 121 211120 14.0 0.48 60 902 211150 17.5 0.60 72 468 211180 21.0 0.72 84 546 211210 24.5 0.84 96 624 211240 28.0 0.96 Tube 9 Inch 1 5 2 1 21 /2" 24 1919 11060 10.6 0.6 6 2878 11090 15.9 0.54 48 88 11120 21.2 0.72 60 4797 11150 26.5 0.90 72 5756 11180 1.8 1.08 84 6716 11210 7.1 1.26 96 7675 11240 42.4 1.44 4 Tube 12 Inch 24 2570 411060 14.2 0.48 6 855 411090 21. 0.72 48 5141 411120 28.4 0.96 60 6426 411150 5.5 1.20 72 7711 411180 42.6 1.44 84 8996 411210 49.7 1.68 96 10282 411240 56.8 1.92 Mounting brckets Bottom Connections = 2 1 /8" Side Connections = 1 15 Connections =(Number of tubes x 2 15 )+ Minimum *For informtion on other sizes, contct Myson, Inc. For conversion from 215ºF Averge Wter Temperture (AWT) nd 65ºF Entering Air Temperture (EAT) to other AWTs, the following fctors pply: Averge wter Temperture temperture (ºF) Difference (ºF) Fctor INET OUTET 190 125 0.80 180 115 0.72 170 105 0.64 160 95 0.56 150 85 0.49 140 75 0.42 Pressure Drops Number of Tubes 2 4 Ft d (W.G.) @ 1 GPM 0.16 0.11 1.2 Note: et outputs for vrious AWTs include 15% et Effect for plcement long outside wlls. Use the 215ºF Output Rting with the Correction Fctor for more specific design considertions. For other EATs, see pge 26. 20 Myson, Inc. 800-698-9690 www.mysoninc.com

5 Center distnce between wter connections = 1 /8" 28 Pedestl (with fins) 2 Tube 6 Inch ength Output Product Weight Wter (in) (Btu/hr) Code (lbs) Content (gls) 2 /4" 9 505 228100 2.1 0.78 55 7050 228140 2.6 1.10 71 9064 228180 42.0 1.42 87 11079 228220 51.5 1.74 1 7 /2" 1 7 /2" 4 Tube 12 Inch 9 8887 428100 45.8 1.56 55 12442 428140 64.6 2.20 71 15998 428180 8.4 2.84 87 19552 428220 102.2.50 *For informtion on other sizes, contct Myson, Inc. Verticl openings = 2 11 1 5 Min. 4 11 =(Number of tubes x 2 15 )+ terl sleeves = 2 1 /2" 4" Minimum For conversion from 215ºF Averge Wter Temperture (AWT) nd 65ºF Entering Air Temperture (EAT) to other AWTs, the following fctors pply: Averge wter Temperture temperture (ºF) Difference (ºF) Fctor Connections 190 125 0.80 180 115 0.72 170 105 0.64 160 95 0.56 150 85 0.49 140 75 0.42 INET Pressure Drops OUTET Number of Tubes 2 4 Ft d (W.G.) @ 1 GPM 0.24 0.11 Note: et outputs for vrious AWT s include 15% et Effect for plcement long outside wlls. Use the 215ºF Output Rting with the Correction Fctor for more specific design considertions. Myson, Inc. 800-698-9690 www.mysoninc.com 21

5 11 Rditor (with fins) 6 Tube 18 Inch ength Output Product Weight Wter (in) (Btu/hr) Code (lbs) Content (gls) 2 /4" Center distnce between lterl sleeves = - 1 /8" 24 565 611060 21.2 0.72 2 4754 611080 28.2 0.96 9 5942 611100 4.4 1.17 55 819 611140 48.5 1.65 72 10696 611180 62.6 2.1 8 Tube 24 Inch 1 5 2 1 21 /2" 24 4490 811060 28.2 0.96 2 5986 811080 7.6 1.0 9 748 811100 45.8 1.60 55 10475 811140 64.6 2.20 72 1469 811180 8.4 2.84 10 Tube 0 Inch 24 585 1011060 5.4 1.20 2 7181 1011080 47.2 1.60 9 8976 1011100 57.5 1.95 55 12566 1011140 81.1 2.75 72 16156 1011180 104.7.55 Mounting brckets Side Connections = 1 15 =(Number of tubes x 2 15 )+ Minimum *For informtion on other sizes, contct Myson, Inc. For conversion from 215ºF Averge Wter Temperture (AWT) nd 65ºF Entering Air Temperture (EAT) to other AWTs, the following fctors pply: Connections Averge wter Temperture temperture (ºF) Difference (ºF) Fctor INET 190 125 0.80 180 115 0.72 170 105 0.64 160 95 0.56 150 85 0.49 140 75 0.42 OUTET Pressure Drops Number of Tubes 6 8 10 Ft d (W.G.) @ 1 GPM 0.45 0.0 0.21 22 Myson, Inc. 800-698-9690 www.mysoninc.com

5 22 Rditor (with fins) 6 Tube 18 Inch ength Output Product Weight Wter (in) (Btu/hr) Code (lbs) Content (gls) 2 /4" Center distnce between lterl sleeves = - 1 /8" 24 625 622060 40.6 1.0 2 88 622080 54.1 1.7 9 10422 622100 66.0 2.10 55 14591 622140 9.1 2.97 72 18760 622180 120.1.8 " 8 Tube 24 Inch 24 7707 822060 54.2 1.70 2 10276 822080 72. 2.24 9 12844 822100 88.1 2.7 55 1798 822140 124.2.90 72 2121 822180 160.4 5.00 10 Tube 0 Inch 24 946 1022060 67.6 2.10 2 12618 1022080 90.1 2.82 9 15772 1022100 110.0.4 55 22081 1022140 155.0 4.84 72 2891 1022180 200.0 6.0 *For informtion on other sizes, contct Myson, Inc. Mounting brcket 1 5 Side Connections = 1 15 2 1 = (Number of tubes x 2 15 )+ Minimum For conversion from 215ºF Averge Wter Temperture (AWT) nd 65ºF Entering Air Temperture (EAT) to other AWTs, the following fctors pply: Connections Averge wter Temperture temperture (ºF) Difference (ºF) Fctor INET 190 125 0.80 180 115 0.72 170 105 0.64 160 95 0.56 150 85 0.49 140 75 0.42 OUTET Pressure Drops Number of Tubes 6 8 10 Ft d (W.G.) @ 1 GPM 0.16 0.1 0.10 Myson, Inc. 800-698-9690 www.mysoninc.com 2

VERTICA DECOR RADIATORS 2 /4" V10 79" Nominl eight No. of Width Output Product Weight Wter Tubes (Inches) (Btu/hr) Code (lbs) Content (gls) 6 18 6648 6V10200 42.7 2.04 8 24 8864 8V10200 57.0 2.72 10 0 11079 10V10200 71.2.40 For conversion from 215ºF Averge Wter Temperture (AWT) 65ºF Entering Air Temperture (EAT) to other AWTs, the following fctors pply: Averge wter Temperture temperture (ºF) Difference (ºF) Fctor Center distnces between bottom connections = - 1 /8" 190 125 0.80 180 115 0.72 170 105 0.64 160 95 0.56 150 85 0.49 140 75 0.42 =(Number of tubes x 2 15 ) + Vent 15 2 1 Vent Connections VENT Mounting brckets INET OUTET Pressure Drops Bottom connections = 1 /4" 5 2 /8" Number of Tubes 6 8 10 Ft d (W.G.) @ 1 GPM 0.18 0.16 0.16 24 Myson, Inc. 800-698-9690 www.mysoninc.com

Correction Fctors Decor Averge Wter Temperture (AWT) F Entering Air Temperture (EAT) F 45 50 55 60 65 70 75 80 85 90 95 240 1.9 1.4 1.0 1.26 1.21 1.17 1.1 1.08 1.04 1.00 0.96 25 1.4 1.0 1.26 1.21 1.17 1.1 1.08 1.04 1.00 0.96 0.92 20 1.0 1.26 1.21 1.17 1.1 1.08 1.04 1.00 0.96 0.92 0.88 225 1.26 1.21 1.17 1.1 1.08 1.04 1.00 0.96 0.92 0.88 0.84 220 1.21 1.17 1.1 1.08 1.04 1.00 0.96 0.92 0.88 0.84 0.80 215 1.17 1.1 1.08 1.04 1.00 0.96 0.92 0.88 0.84 0.80 0.76 210 1.1 1.08 1.04 1.00 0.96 0.92 0.88 0.84 0.80 0.76 0.72 205 1.08 1.04 1.00 0.96 0.92 0.88 0.84 0.80 0.76 0.72 0.68 200 1.04 1.00 0.96 0.92 0.88 0.84 0.80 0.76 0.72 0.68 0.64 195 1.00 0.96 0.92 0.88 0.84 0.80 0.76 0.72 0.68 0.64 0.60 190 0.96 0.92 0.88 0.84 0.80 0.76 0.72 0.68 0.64 0.60 0.56 185 0.92 0.88 0.84 0.80 0.76 0.72 0.68 0.64 0.60 0.56 0.5 180 0.88 0.84 0.80 0.76 0.72 0.68 0.64 0.60 0.56 0.5 0.49 175 0.84 0.80 0.76 0.72 0.68 0.64 0.60 0.56 0.5 0.49 0.46 170 0.80 0.76 0.72 0.68 0.64 0.60 0.56 0.5 0.49 0.46 0.42 165 0.76 0.72 0.68 0.64 0.60 0.56 0.5 0.49 0.46 0.42 0.8 160 0.72 0.68 0.64 0.60 0.56 0.5 0.49 0.46 0.42 0.8 0.5 155 0.68 0.64 0.60 0.56 0.5 0.49 0.46 0.42 0.8 0.5 0.2 150 0.64 0.60 0.56 0.5 0.49 0.46 0.42 0.8 0.5 0.2 0.28 145 0.60 0.56 0.5 0.49 0.46 0.42 0.8 0.5 0.2 0.28 0.25 140 0.56 0.5 0.49 0.46 0.42 0.8 0.5 0.2 0.28 0.25 0.22 15 0.5 0.49 0.46 0.42 0.8 0.5 0.2 0.28 0.25 0.22 0.19 10 0.49 0.46 0.42 0.8 0.5 0.2 0.28 0.25 0.22 0.19 0.16 125 0.46 0.42 0.8 0.5 0.2 0.28 0.25 0.22 0.19 0.16 0.1 120 0.42 0.8 0.5 0.2 0.28 0.25 0.22 0.19 0.16 0.1 0.11 115 0.8 0.5 0.2 0.28 0.25 0.22 0.19 0.16 0.1 0.11 0.08 110 0.5 0.2 0.28 0.25 0.22 0.19 0.16 0.1 0.11 0.08 0.06 105 0.2 0.28 0.25 0.22 0.19 0.16 0.1 0.11 0.08 0.06 0.0 100 0.28 0.25 0.22 0.19 0.16 0.1 0.11 0.08 0.06 0.0 0.01 et output for Decor Rditors is determined for n Averge Wter Temperture (AWT) of 215ºF nd n Entering Air Temperture (EAT) of 65ºF. Use this tble to determine the correction multiplier for other conditions. 26 Myson, Inc. 800-698-9690 www.mysoninc.com

MOUNTING DETAIS Type Stndrd Brcket oction Mounting Detils 11 Bsebord Flexible Along All Fins 24" to 48" 51" to 96" 5 7 /8" b 5 7 /8" 5 7 /8" b b 5 7 /8" 2 Tubes 2 Tubes 5 7 /8" b 5 7 /8" Tubes 5 7 /8" b 5 7 /8" 4 Tubes 5 7 /8" b 5 7 /8" 5 7 /8" b b 5 7 /8" Tubes 5 7 /8" b b 5 7 /8" b= 11 /4" 4 Tubes b= 11 /4" 2 24" to 48" 51" to 96" 11 Rditor 5 7 /8" b b 5 7 /8" 22 Rditor REF.001 Wll mounted. Stndrd mounting system for ll models. 6, 8, 10 Tubes 6, 8, 10 Tubes b= 11 /4" b= 11 /4" 2 =Number of tubes X 2 15 + Note: Single tube models 11, 22 nd 28 must be mounted on feet. 28 Pedestl Type =9" Type = 55" to 87" REF.00 Mounting with djustble feet 1 /2" to 4 /4" /4" /4" /4" /4" = 7 1 /2" 2 Myson, Inc. 800-698-9690 www.mysoninc.com 27

MOUNTING DETAIS Type Stndrd Brcket oction Mounting Detils V10 Verticl Decor Verticl Mounting 4 Brckets W REF.001 Wll mounted. b 79" b 6, 8, 10 Tubes W = Number of tubes X 2 15 + = 5 1 (Distnce from the outside to C brcket) b = 4 5 (Distnce from top/bottom to C brcket) TS4 Column Decor Column Mounting 4 Brckets W b REF.001 Wll mounted. 79" Stndrd mounting system for ll models. b W = (Number of tubes 1) X + 1 5 = 2 7 /8" (Distnce from the outside to C brcket) b = 1" (Distnce from top/bottom to C brcket) TS4 Custom Order Optionl Brcket oction 12" 5 1 /4" 5 1 /4" REF.00 1 /2" to 4 /4" ceiling support mounting nd djustble feet 1 /2" to 4 /4" 6" 6" 5 1 /4" 5 1 /4" Spce No. of Tubes 1 5 /8" 8 Spce No. of Tubes 1 5 /8" 11, 1, 16, 18, 21 28 Myson, Inc. 800-698-9690 www.mysoninc.com