Bulk Melters BM 00 with Gear Pump EASY-pneumatic Parts List P/N 9776J English NORDSON ENGINEERING GMBH LÜNEBURG GERMANY
Note After approx. December 00, this parts list applies to the entire series. Order number P/N = Order number for Nordson products Notice This is a Nordson Corporation publication which is protected by copyright. Original copyright date 00. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Nordson Corporation. The information contained in this publication is subject to change without notice. Trademarks AccuJet, AquaGuard, Asymtek, Automove, Autotech, Blue Box, CF, CanWorks, Century, Clean Coat, CleanSleeve, CleanSpray, Compumelt, Control Coat, Cross-Cut, Cyclo-Kinetic, Dispensejet, DispenseMate, Durafiber, Durasystem, Easy Coat, Easymove Plus, Econo-Coat, EPREG, ETI, Excel 000, Flex-O-Coat, FlexiCoat, Flexi-Spray, Flow Sentry, Fluidmove, FoamMelt, FoamMix, Helix, Horizon, Hose Mole, Hot Shot, Hot Stitch, Isocoil, Isocore, Iso-Flo, JR, KB0, Little Squirt, Magnastatic, MEG, Meltex, MicroSet, Millenium, Mini Squirt, Moist-Cure, Mountaingate, MultiScan, Nordson, OmniScan, Opticoat, OptiMix, Package of Values, Patternview, PluraFoam, Porous Coat, PowderGrid, Powderware, Prism, Pro-Flo, ProLink, Pro-Meter, Pro-Stream, PRX, RBX, Rhino, S. design stylized, Saturn, SC, Seal Sentry, Select Charge, Select Coat, Select Cure, Slautterback, Smart-Coat, Spray Squirt, Spraymelt, Super Squirt, Sure Coat, System Sentry, Tela-Therm, Trends, Tribomatic, UniScan, UpTime, Veritec, Versa-Coat, Versa-Screen, Versa-Spray, Walcom, Watermark, When you expect more. are registered trademarks of Nordson Corporation. ATS, Aerocharge, Auto-Flo, AutoScan, BetterBook, Chameleon, CanNeck, Check Mate, Colormax, Control Weave, Controlled Fiberization, Coolwave, CPX, Dry Cure, E-Nordson, EasyClean, Eclipse, Equi=Bead, Fill Sentry, Fillmaster, Gluie, Heli-Flow, Ink-Dot, Iso-Flex, Kinetix, Lacquer Cure, Maxima, MicroFin, Minimeter, Multifil, Origin, PermaFlo, PluraMix, Powder Pilot, Powercure, Primarc, Process Sentry, PurTech, Pulse Spray, Ready Coat, Select Series, Sensomatic, Shaftshield, SheetAire, Spectral, Spectronic, Spectrum, Summit, Sure Brand, Sure Clean, Sure Max, Swirl Coat, Tempus, Tracking Plus, Trade Plus, Universal, Vista, Web Cure, Rings (Design) are trademarks of Nordson Corporation. Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes, could lead to violation of the owners rights. COV_EN_9776J All right reserved
Table of Contents I Table of Contents. Notes....................................................... Assembly Overview.......................................... Assemblies................................................. 6 Frame................................................... 6 Switch Rod............................................... 8 Hose Support, Single..................................... 0 Hose Support, Dual...................................... Drive, WS070/PR....................................... 4 Drive, WS00/PUS...................................... 6 Protection Cover, PR...................................... 8 Protection Cover, PU...................................... 0 Drum Shell (Drum Jacket), H0........................... Drum Shell (Drum Jacket), H79........................... 4 Device, Drum Inserted.................................... 6 Heating Punch........................................... 8 Finned Melting Plate..................................... 0 Axial Melting Plate....................................... 0 Smooth Melting Plate..................................... 0 Hose Connection, NW08/6............................... Hose Connection, NW0.................................. Hose Connection, NW.................................. 4 Drum Sealing............................................ Gear Pump, PR6m...................................... 6 Gear Pump, PRm..................................... 8 Gear Pump, PRm..................................... 40 Gear Pump, PRm..................................... 4 Adapter Plate, Gear Pumps PR............................. 44 Gear Pump, PU/8R................................... 46 Gear Pump, PU/8R................................... 48 Gear Pump, PU/8R................................... 0 Gear Pump, PU0/8R................................... Auto Aeration Valve...................................... 4 P/N 9776J
II Table of Contents Installation Kit........................................... 6 Man. Aeration Valve...................................... 8 Air-relief Valve (Deaeration Valve).......................... 60 Safety Valve (for Adapter Plate)............................ 6 Safety Valve (for PU-Pumps).............................. 64 Exhaust Hood........................................... 66 Pneumatic Compl. (Pneumatic Diagram).................... 68 Indication Signs.......................................... 70 Cable Channel.......................................... 7 Cable Channel.......................................... 74 Electric Complete (Electr. cabinet) Mounting Plate............ 76 Other Electrical Components.............................. 80 Kits.................................................... 86 Circuit Breaker Connection Designation..................... 86 P/N 9776J
BM 00 EASY with Gear Pump : The valid configuration code for the delivered system is described in the document index. : Parts without a P/N are not spare parts and can not be ordered.. Notes The electrical components are labeled in accordance with DIN 40 79, part. The label corresponds to the designation in the current flow diagram and is located on or near the component. The component designation contains information on the component (e.g. relay, fuse), including an identifying letter. - F Corresponding current path of wiring diagram Designating letter (refer to table) Page in current flow diagram 006 Fig. Example: fuse designation A B E F H K M N Q R S T X Y Assemblies, subassemblies Converters from elect. to non-electrical quantities or vice versa Miscellaneous, e.g. lighting devices, heating devices Protective devices Signal devices Relays, conductors Motors Amplifiers, controllers Power switchgears Resistors Switches, dials Transformers Terminals, plugs, sockets Electrically operated mechanical devices P/N 9776J
BM 00 EASY with Gear Pump. Assembly Overview 4 0 6 9 8 7 000 Fig. Assembly overview (part ) P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Fig. Quantity Box Code 940 Frame, Nordson-Blue, complete w/o trafo 4 94 Frame, Nordson-Blue, complete w/ trafo 4-4608 Device heating punch inquiry - - 448009 Hose support, complete single 6 7 46400 Hose support, complete dual 7 7 4 7888 Drive, WS070/PR, compl. 8-4 788874 Drive, WS00/PUS, compl. 9 0-7889 Protection cover, PR-PR, L406 0-78860 Protection cover, PR-PR00, L8 4 0780 Protection cover, PU/8, L4 0 078 Protection cover, PU-/8, L4, 078 Protection cover, PU0/8, L40 6 9009 Drum shell complete, H0 - - 444789 Drum shell complete, H79 7988 Drum shell complete, H79 7 0796 Device drum inserted 4 - - 8 0704 Heating punch, d, SAS, complete - - (for Pos. 9) 9 46070 Finned (High melt), melting plate, VX,complete 6 F, P 007 Axial plate, VX, complete A, B, R, C 7990 Smooth plate, VX, complete G, U 0 46447 Hose connection fitting, NW08/6 7 4 K 7 7 0694 Hose connection fitting, NW0 8 4 M 7 7 460990 Hose connection fitting, NW 9 4 L 7 7 76977 Seal, T.E.S, Model 00 0 - J X J W J - P/N 9776J
4 BM 00 EASY with Gear Pump. Assembly Overview (contd.), 4 0 7 8 6 4 9 9 000 Fig. Assembly overview (part ) P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Fig. Quantity Box Code 60 Gear pump, PR6m 46 Gear pump, PRm 447 Gear pump, PRm 479 Gear pump, PRm 4 4 788 Adapter plate, PUS/PR.-, compl. - 4 4 7886 Gear pump, PU/8R, D, heated 6 0 4066 Gear pump, PU/8R, D, heated 7 4070 Gear pump, PU/8R, D, heated 8 400764 Gear pump, PU0/8R, D, heated 9 949 Auto Aeration valve 0 A, B, F, G 6 9476 Installation kit A, B, F, G 7 0796 Man. Aeration valve R, C, P, U 8 444896 Air-relief valve - - 9 8 Safety valve, 00bar, MX 4 0-7 Safety valve, 00bar, ZS/DG/PUS - 4 0 07 Pressure sensor (refer to Other Electrical Components) - 9 D 8 Plug /UNF, L, DD - - 46086 Exhaust hood, complete (Zubehör) 6 79884 Exhaust hood, complete (Accessory) B, C, G, U X B, C, G, U W 0796 Pneumatic, complete w/o cabinet 7 - - - 448684 Indication sign pneumatic, complete 8 - - 0990 Cable channel, complete 9 - - 4 099 Cable channel, complete 40 - - 0790 Cable channel, complete - - - - - Electric, complete 4, 4 - - - - Further Electric parts 4-4 - - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
6 BM 00 EASY with Gear Pump. Assemblies Frame 4 6 4 7 8 9 4 4 40 7 8 9 8 7 6 7 6 8 4 9 4 0 9 8 7 7 6 940_007SR Fig. 4 Frame P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 940 Frame, Nordson-Blue, complete, w/o trafo 94 Frame, Nordson-Blue, complete, w/ trafo 4-7868 Plug, 70x70x, h7 - - 49960 Spacer - - 4604 Traverse, frame, A80, RAL900 - - 4 9 Hexagon head screw, M0x0, DIN9, stainless - - 94646 Washer, D40, DIN type B 4 - - 6 9 Hexagon nut, M9, DIN94 4 - - 7 00 Allan head cap screw, M8x0, DIN9, stainless - - 8 67 Sealing ring, R/8 - - 9 ÁÁÁÁÁ 709747 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ support, elec.cabinet BM00 ÁÁÁÁÁ - - 0 ÁÁÁÁÁ 64 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ washer D, DIN type A ÁÁÁÁÁ - - ÁÁÁÁÁ 009 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ allan head cap screw Mx DIN9 SST ÁÁÁÁÁ - - ÁÁÁÁÁ 68 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ washer D8,4 DIN SST ÁÁÁÁÁ - - ÁÁÁÁÁ 00 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ allan head cap screw M8x0 DIN9 SST ÁÁÁÁÁ - - 4 07680 Control cabinet, complete - - ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ 808 Hexagon head screw, M0x0/8.8, DIN9 4 - - 6 7 Washer, D0., DIN type B 4 - - 7 90 Hexagon nut, M0, DIN94, stainless 4 - - 8 944 Assy, base, complete w/o trafo 94 Assy, base, complete w/ trafo 4-9 07894 Protection shield, Nordson-Blue - - 0 4666 Distance bolt, BC40, i-am6, L40 4 4 Allan head cap screw, M6x8, DIN9, stainless 4 0077 Allan head cap screw, Mx8, DIN9, stainless - - 4608 Protection shield, Nordson-Blue - - 4 4449 Cylinder pipe, left frame - - 46099 Base plate, A80, Nordson blue - - 6 0060 Lifting eye bolt, M0, DIN80 4 - - 7 004 Allan head cap screw, M0x0, DIN9, stainless 8 - - 8 40990 Washer, D, DIN type B - - 9 44494 Cylinder pipe, right frame - - 0 7904 Hexagon nut, M0-A, low, DIN EN ISO 0 - - 80 Washer, D, DIN type B - - 66 Piston, TDUO60- - - 46647 Piston rod, L4 - - 4 477 O-ring 4x - - 674 Circlip bore, D60, DIN47 - - 6 648 Sliding bearing, 40x44x0, PERMAGL.P 4 - - 7 448008 Rod guide - - 8 67 Bar seal - - 9 68 Dirt scraper - - 40 7804 Drum support, H=8/H=0 - - 4 46646 Pull rod, L4 - - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
8 BM 00 EASY with Gear Pump Switch Rod 9 9 8 7 6 4 6 4 9 7 0 8 8 4608 Fig. Switch rod P/N 9776J
BM 00 EASY with Gear Pump 9 Item P/N Description Quantity Box Code 4608 Device, heating punch inquiry (switch rod) - - 907 Allan head cap screw, M8x6, DIN9, stainless 006 Allan head cap screw, M4x, DIN9, stainless 007 Allan head cap screw, M4x, DIN9, stainless 4 4749 Mounting plate, 0xx69 009 Washer, D4., DIN type A 6 6 04 Hexagon nut, M4, DIN94 6 7 4748 Mounting plate, xx00 8 4860 Level switch, w/connection cable, m 467 Microswitch (refer to Other Electrical Components) 467 Microswitch (refer to Other Electrical Components) 467 Microswitch (refer to Other Electrical Components) 467 Cover for microswitch 9 44649 Set screw, M6x0/4H, DIN9 4 0 4489 Guide rod, RAL900 68 Washer, D8.4, DIN type B, stainless 44890 Guide pipe, RAL900 4747 Mounting plate, 90xx00 4 4609 Contact maker bar 90 Hexagon nut M0, DIN94, stainless 6 7 Washer, D0., DIN type B 7 467 Mounting block, RAL900 8 697 Serrated lock washer, D6.4, DIN6798 A 9 468 Allan head cap screw, M6x, DIN9, stainless 6 6 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
0 BM 00 EASY with Gear Pump Hose Support, Single 4 4 9 8 7 6 448009 Fig. 6 Hose support, single P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 448009 Hose support, complete, single 7 46670 Plug, d, h.4 46666 Compression spring, x97,7x49 46667 Weldment, hose hanger 4 0 Spring lock washer, D4, DIN7 A 04 Hexagon nut, M4, DIN94 6 0009 Allan head cap screw, M4x8, DIN9, stainless 7 46669 Clamp, mm, type:604/ 8 907 Allan head cap screw, M8x6, DIN9, stainless 9 68 Washer, D8.4 DIN type B, stainless To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
BM 00 EASY with Gear Pump Hose Support, Dual 8 0 4 8 8 8 9 4 7 6 8 9 7 6 46400 Fig. 7 Hose support, dual P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 46400 Hose support, complete, dual 7 46670 Plug, d, h.4 4 46666 Compression spring, x97,7x49 46667 Weldment, hose hanger 4 0 Spring lock washer, D4, DIN7 A 4 04 Hexagon nut, M4, DIN94 4 6 0009 Allan head cap screw, M4x8, DIN9, stainless 4 7 46669 Clamp, mm, type:604/ 4 8 907 Allan head cap screw, M8x6, DIN9, stainless 9 68 Washer, D8.4 DIN type B, stainless 4 0 464499 Mounting plate, xx86, St7-K 6 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
4 BM 00 EASY with Gear Pump Drive, WS070/PR 9 6 8 4 6 4 7 4 4 7888 Fig. 8 Drive WS070/PR P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 7888 Drive, WS070/PR, complete - 4 78866 Motor, WS70, GCRB4B8-UD7XH-4G V (refer to Other Electrical Components) 49 Hexagon head screw, M6x0, DIN9, stainless 009 Washer, D6.4, DIN type B, stainless 4 4 474 Hexagon nut, M8, DIN94, stainless 4 684 Set screw, M6x8/4H, DIN9 6 804 Set screw, M8x/4H, DIN9 6 7 7889 Motor flange, RAL900 8 7886 Shaft joint, extractable, typ:ga 9 9 Blind plug, metal, PG6 4 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
6 BM 00 EASY with Gear Pump Drive, WS00/PUS 7 4 4 6 788874 Fig. 9 Drive WS00/PUS P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 788874 Drive, WS00/PUS, complete 0-68 Washer, D8.4, DIN type B, stainless 8 4996 Hexagon head screw, M8x, DIN9, stainless 4 4079 Motor. WS00. SCR4B8-UD90LNH-4G-V (refer to Other Electrical Components) 4 474 Hexagon nut, M8, DIN94, stainless 4 804 Set screw. M8x/4H. DIN9 8 6 444787 Motor flange, RAL900 7 780 Shaft joint, extractable. typ:6ga To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
8 BM 00 EASY with Gear Pump Protection Cover, PR.. 7889 Fig. 0 Protection cover, PR.. P/N 9776J
BM 00 EASY with Gear Pump 9 Item P/N Description Quantity Box Code 7889 Protection cover, PR-PR, L406, complete - 78860 Protection cover, PR-PR00, L8, complete 4 7887 Protection cover, PR-PR, L406-7888 Protection cover, PR-PR00, L8 4 94 Allan head cap screw, Mx0, DIN9, stainless 6 64 Washer, D., DIN type A 6 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
0 BM 00 EASY with Gear Pump Protection Cover, PU.. 0780 Fig. Protection cover, PU.. P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 0780 Protection cover, PU/8, L4, complete 0 078 Protection cover, PU-/8, L4, complete, 078 Protection cover, PU0/8, L40, complete 7887 Protection cover, PU/8, L4 0 787 Protection cover, PU-/8, L4, 0779 Protection cover, PU0/8, L40 94 Allan head cap screw, Mx0, DIN9, stainless 64 Washer, D., DIN type A To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
BM 00 EASY with Gear Pump Drum Shell (Drum Jacket), H0 4 6 0 8 6 9 8 6 0 8 0 9 7 9009 Fig. Drum shell (drum jacket) H0 P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 9009 Drum shell, H0, RAL900, complete - - Allan head cap screw, M8x60/0.9, DIN9 8 4998 Safety latch, RAL900 0040 Allan head cap screw, M8x90/0.9, DIN9 4 47 Back plate, RAL900, H0 044 Hexagon nut, M8, DIN94 8 6 68 Washer, D8.4, DIN type B, stainless 0 7 49 Door 8 7876 Flat head screw, M8x0, DIN799 8 9 460 Shim plate, RAL900 0 49964 Locking jig, model:4 48 Door - 4996 Strip rolls, L40, D/8, type:0-u4 4 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
4 BM 00 EASY with Gear Pump Drum Shell (Drum Jacket), H79 4 6 7 8 6 4 7 7 0 9 444789B Fig. Drum shell (drum jacket), H79 P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 444789 Drum shell, H79, Nordson Blue, complete 44479 Door 40887 Flat head screw, M8x, DIN799 8 044 Hexagon nut, M8, DIN94 6 4 4449 Safety latch 68 Washer, D8.4, DIN type B, stainless 8 6 97 Allan head cap screw, M8x0, DIN9 7 00 Allan head cap screw, M8x0, DIN9 6 8 444790 Rear panel BM00 drum shell H79 NE Blue 9 4996 Strip rolls, L40, D/8, type:0-u4 6 0 44479 Door 49964 Locking jig, model:4 4449 Shim plate J X To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Item P/N Description Quantity Box Code 7988 Drum shell, H79, Nordson Blue, complete 44479 Door 40887 Flat head screw, M8x, DIN799 8 044 Hexagon nut, M8, DIN94 6 4 4449 Safety latch 68 Washer, D8.4, DIN type B, stainless 8 6 4684 Allan head cap screw, M8x40, DIN9 7 00 Allan head cap screw, M8x0, DIN9 8 8 7988 Rear panel BM00 P drum shell H79 Blue 9 4996 Strip rolls, L40, D/8, type:0-u4 6 0 44479 Door 49964 Locking jig, model:4 4449 Shim plate J W To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
6 BM 00 EASY with Gear Pump Device, Drum Inserted 4 8 7 6 0796.0 Fig. 4 Device, drum inserted P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 0796 Device, drum inserted - - 99 Proximity switch, 4-40VAC/4-0VDC (refer to Other Electrical Components) 94847 Bracket, Mx, VX 009 Allan head cap screw, Mx DIN9, stainless 6 4 64 Washer, D., DIN type A 94949 Adapter block, VX 6 94848 Piercer, VX 7 4777 Compression spring,.x0.x0.7 8 948 Cover, VX To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
8 BM 00 EASY with Gear Pump Heating Punch 4 6 7 8 9 0 9 8 7 4 6 070.00 Fig. Heating punch P/N 9776J
BM 00 EASY with Gear Pump 9 Item P/N Description Quantity Box Code 0704 Heating punch BM00 D 400V SAS compl - - 64 Washer, D., DIN type A 8 - - 94 Allan head cap screw, Mx0, DIN9, stainless 8 - - 4687 Sealing ring, 4x8, DIN760, form A - - 4 007 Allan head cap screw, M4x0 DIN9-A-70 - - 070 Electric cover, compl., PR/PU, VX, CE - - 6 89 Notched taper pin,,7x4, DIN476 - - 7 9008 Sign, heat output,general - - 8 46668 O-ring 48x - - 9 07064 Flange angel, metal, 90, metric, Mx. - - 0 009 Allan head cap screw, Mx DIN799 - - 7847 Hexagon head screw, M0x0/8.8, DIN9 6 - - 7 Washer, D0., DIN, Form B 6 - - 000 Allan head cap screw, Mx, DIN9, stainless - - 4 067 Platen RTD Sensor (refer to Other Electrical Components) - - 007 Screw plug /NPTx4mm black 7 7 6 0704 Heating punch, PU, 400V, SAS, D, d, - - VX 7 070 Seal, electric cover, PR/PU - - 8 70469 Hexagon nut, M4, DIN94-MS4 - - 9 697 Serrated lock washer D4, DIN6798 A - - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
0 BM 00 EASY with Gear Pump Finned Melting Plate Axial Melting Plate Smooth Melting Plate 4 P/N 4607 P/N 008 P/N 797 46070, 007, 7990 Fig. 6 Melting plates P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 46070 Finned Melting plate, VX, complete F, P 4607 Finned melting plate - - 60 Thread insert, M0x8, type: RAMPA 6 - - 4 090 O-ring, 0x - - - Hose connection fitting, compl. (refer to Hose Connection NW08/6, NW0, NW) 7 7 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Item P/N Description Quantity Box Code 007 Axial plate, VX, complete A, B, R, C 008 Axial plate - - 60 Thread insert, M0x8, type: RAMPA 6 - - 4 090 O-ring, 0x - - - Hose connection fitting, compl. (refer to Hose Connection NW08/6, NW0, NW) 7 7 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Item P/N Description Quantity Box Code 7990 Smooth plate, VX, complete G, U 797 Smooth plate - - 60 Thread insert, M0x8, type: RAMPA 6 - - 4 090 O-ring, 0x - - - Hose connection fitting, compl. (refer to Hose Connection NW08/6, NW0, NW) 7 7 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
BM 00 EASY with Gear Pump Hose Connection, NW08/6 4 6 46447 Fig. 7 Hose connection, NW08/6 Item P/N Description Quantity Box Code 46447 Hose fitting, NW08/6, VX, compl. 7 7 0786 Hose fitting, a /6 a/4unf - - 44667 Hose fitting, a9/6unf a/4unf - - 4788 Hexagon head screw, M6x0, DIN9 4 - - 4 009 Washer, D6.4, DIN type B 4 - - 077 Adapter plate, i/4unf-a60x60, VX - - 6 O-ring, 4x - - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
BM 00 EASY with Gear Pump Hose Connection, NW0 4 0694 Fig. 8 Hose connection, NW0 Item P/N Description Quantity Box Code 0694 Hose fitting, NW0, compl. 7 7 668 Hose fitting, a /8 N anpt - - 009 Washer, D6.4, DIN type B 4 - - 4788 Hexagon head screw, M6x0, DIN9 4 - - 4 069 Adapter plate, inpt, -a60x60 - - O-ring, 4x - - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
4 BM 00 EASY with Gear Pump Hose Connection, NW 4 460990 Fig. 9 Hose connection, NW Item P/N Description Quantity Box Code 460990 Hose fitting, NW, VX, compl. 7 7 448 Hexagon head screw, M6x0, DIN9, stainless 4 - - 009 Washer, D6.4, DIN type B 4 - - 4609 Hose fitting, am4x.-a60x60, L60, VX - - 4 O-ring 4x - - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
BM 00 EASY with Gear Pump Drum Sealing Fig. 0 Drum sealing Item P/N Description Quantity Box Code 76977 Seal, T.E.S, Model 00 - J - To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
6 BM 00 EASY with Gear Pump Gear Pump, PR6m 9 8 7 4 6 4 6 7 8 0 9 60.00 Fig. Gear pump PR6m P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 60 Gear pump, PR6m 07 Feather key, 4x4x6, DIN688 690 Gear A, PR6m 6 Parallel pin, x40 4 69 Gear B, PR6m 89040 Pump block 6 988 End block, PR4m 7 9 O-ring, 0x, 8 449 Pump shaft, PR6, compl. 80 Washer,.x90degreex8x.6 897 Allen countersunk screw, Mx0, DIN799 898 Serrated lock washer, D., DIN6798 V 9 89 Notched taper pin,.7x4, DIN476 0 400774 ID. TAG 9070 Front block, PR4m 006 Allan head cap screw, M8x, DIN9 4 09 Parallel pin, 8m6x0, DIN6, hdn. 4 84 O-ring, 8x. 84 Bushing, PR, D.7 6 8 Sealing ring,.x8.x6 7 06 Washer 8 06 Compression spring, x.x 9 874 Packing screw, SW4, nickel To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
8 BM 00 EASY with Gear Pump Gear Pump, PRm 9 8 7 4 6 4 6 7 8 0 9 46.00 Fig. Gear pump PRm P/N 9776J
BM 00 EASY with Gear Pump 9 Item P/N Description Quantity Box Code 46 Gear pump, PRm Feather key, 4x4x0 DIN688 Gear A, PRm Parallel pin, x40 4 Gear B, PRm Pump block 6 End block, PR6-m 7 O-ring, 0x. 8 Pump shaft, PR, compl. Washer,.x90degreex8x.6 Allen countersunk screw, Mx0, DIN799 Serrated lock washer, D., DIN6798 V 9 Notched taper pin,.7x4, DIN476 0 ID. TAG Front block, PR6-m Allan head cap screw, M8x60/0.9, DIN9 4 Parallel pin, 8m6x0, DIN6, hdn. 4 O-ring, 8x. Bushing, PR, D.7 6 Sealing ring,.x8.x6 7 Washer 8 Compression spring, x.x 9 Packing screw, SW4, nickel To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
40 BM 00 EASY with Gear Pump Gear Pump, PRm 9 8 7 4 6 4 6 7 8 0 9 447.00 Fig. Gear pump PRm P/N 9776J
BM 00 EASY with Gear Pump 4 Item P/N Description Quantity Box Code 447 Gear pump, PRm Feather key, 4x4x0, DIN688 Gear A, PRm Parallel pin, x40 4 Gear B, PRm Pump block 6 End block, PR6-m 7 O-ring, 0x, 8 Pump shaft, PR, compl. Washer,.x90degreex8x.6 Allen countersunk screw, Mx0, DIN799 Serrated lock washer, D., DIN6798 V 9 Notched taper pin,.7x4, DIN476 0 ID. TAG Front block, PR6-m Allan head cap screw, M8x60/0.9, DIN9 4 Parallel pin, 8m6x0, DIN6, hdn. 4 O-ring, 8x, Bushing, PR, D.7 6 Sealing ring,.x8.x6 7 Washer 8 Compression spring, x.x 9 Packing screw, SW4, nickel To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
4 BM 00 EASY with Gear Pump Gear Pump, PRm 9 8 7 4 6 4 6 7 8 0 9 479.00 Fig. 4 Gear pump PRm P/N 9776J
BM 00 EASY with Gear Pump 4 Item P/N Description Quantity Box Code 479 Gear pump, PRm 4 Feather key, 4x4x, DIN688 Gear A, PRm Parallel pin, Dx9 4 Gear B, PRm Pump block 6 End block, PR6-m 7 O-ring, 0x. 8 Pump shaft, PR, compl. Washer,.x90degreex8x.6 Allen countersunk screw, Mx0, DIN799 Serrated lock washer, D., DIN6798 V 9 Notched taper pin,.7x4, DIN476 0 ID. TAG Front block, PR6-m Allan head cap screw, M8x7/0.9, DIN9 4 Parallel pin, 8m6x60, DIN6, hdn. 4 O-ring, 8x. Bushing, PR, D.7 6 Sealing ring,.x8.x6 7 Washer 8 Compression spring, x.x 9 Packing screw, SW4, nickel To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
44 BM 00 EASY with Gear Pump Adapter Plate, Gear Pumps PR.. 8 7 9 4 0 6 0 4 788.00 Fig. Adapter plate, gear pumps PR.. P/N 9776J
BM 00 EASY with Gear Pump 4 Item P/N Description Quantity Box Code 788 Adapter plate, PUS/PR.-, compl. - 4 689 Allan head cap screw, M8x6/0.9, DIN9 009 Washer, D4., DIN type A 00 Allan head cap screw, M4x0, DIN9, stainless 4 9946 Electric cover, PUS pumps, L9, CE - Notched taper pin,.x6., DIN77 - Sign 7889 Sealing electric cover, PUS pumps 6 069 Heater cartridge, /8 x4, 0V-0W (refer to Other Electrical Components) 7 00 Allan head cap screw, M4x6, DIN9, stainless 8 04 Luster terminal, ceramics, p..qmm 9 067 RTD sensor, pump heating (refer to Other Electrical Components) 0 00 Screw plug, /8NPTx7.mm, black 788 Adapter plate PUS/PR.- 070 O-ring x 4 480 O-ring 9x. 8 safety valve 00bar MX (refer to Safety Valve) To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
46 BM 00 EASY with Gear Pump Gear Pump, PU/8R 0 9 4 6 7 8 9 4 8 8 7 0 8 7 4 6 8 4 0 9 7 8 7 6 4 7886 Fig. 6 Gear pump PU/8R P/N 9776J
BM 00 EASY with Gear Pump 47 Item P/N Description Quantity Box Code 7886 Gear pump, PU/8R, D, heated 0 Hexagon head screw, M6x0, DIN9, stainless 4 Disc spring, D., GR, DIN09 type A Pressure piece, PU-0/8 4 Turcon-Roto-Variseal, D, inside seal Sleeve, PU-0 6 O-ring, 6x 7 Ring 8 Allan head cap screw, M8x80/0.9, DIN9 9 Electric cover, PUS pumps, L9, CE 9 Notched taper pin,.x6., DIN77 0 Sign 0 Allan head cap screw, M4x0, DIN9, stainless Washer, D4., DIN type A 7889 Sealing electric cover, PUS pumps 64 Heater cartridge, /8 x, 0V-0W (refer to Other Electrical Components) 4 Allan head cap screw, M4x6, DIN9, stainless 067 RTD sensor, pump heating (refer to Other Electrical Components) 6 Luster terminal, ceramics, p..qmm 7 Set screw, M8x/4H, DIN9 8 Screw plug, /8NPTx7.mm, black 7 Safety valve, 00bar, ZS/BM/PUS (refer to Safety Valve) Front block, PU-0/8R, D O-ring, x 4 Parallel pin, D8m6x70, DIN6, hdn. Feather key A, 8x7x0, DIN688 6 Feather key A, 8x7x4, DIN688 7 O-ring, 4x 8 Pump shaft, PU/8, w/collar 9 Parallel pin, Dx60 0 O-ring, 9x, End block, PU-0/8, D, w/o bushing Pump block, PU/8 Gear A, PU/8m., D, w/o bushing 4 Gear B, PU/8m. D, w/o bushing - ID plate, 8x0, pumps Nordson - Notched taper pin,.7x4, DIN476 P/N 9776J
48 BM 00 EASY with Gear Pump Item P/N Description Quantity To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Box Code P/N 9776J
BM 00 EASY with Gear Pump 49 Gear Pump, PU/8R 0 9 4 6 7 8 9 4 8 8 7 0 8 7 4 6 8 4 0 9 7 8 7 6 4 4066 Fig. 7 Gear pump PU/8R P/N 9776J
0 BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 4066 Gear pump, PU/8R, D, heated Hexagon head screw, M6x0, DIN9, stainless 4 Disc spring, D., GR, DIN09 type A Pressure piece, PU-0/8 4 Turcon-Roto-Variseal, D, inside seal Sleeve, PU-0 6 O-ring, 6x 7 Ring 8 Allan head cap screw, M8x90/0.9, DIN9 9 Electric cover, PUS pumps, L9, CE 9 Notched taper pin,.x6., DIN77 0 Sign 0 Allan head cap screw, M4x0, DIN9, stainless Washer, D4., DIN type A 7889 Sealing electric cover, PUS pumps 64 Heater cartridge, /8 x, 0V-0W (refer to Other Electrical Components)) 4 Allan head cap screw, M4x6, DIN9, stainless 067 RTD sensor, pump heating (refer to Other Electrical Components)) 6 Luster terminal, ceramics, p..qmm 7 Set screw, M8x/4H, DIN9 8 Screw plug, /8NPTx7.mm, black 7 Safety valve, 00bar, ZS/BM/PUS (refer to Safety Valve) Front block, PU-0/8R, D O-ring, x 4 Parallel pin, D8m6x80, DIN6, hdn. Feather key A, 8x7x0, DIN688 6 Feather key A, 8x7x4, DIN688 7 O-ring, 4x 8 Pump shaft, PU/8, w/collar 9 Parallel pin, Dx70 0 O-ring, 9x. End block, PU-0/8, D, w/o bushing Pump block, PU/8 Gear A, PU/8m., D, w/o bushing 4 Gear B PU/8m, D w/o bushing - ID plate, 8x0, pumps Nordson - Notched taper pin,.7x4, DIN476 P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Box Code P/N 9776J
BM 00 EASY with Gear Pump Gear Pump, PU/8R 0 9 4 6 7 8 9 4 8 8 7 0 8 7 4 6 8 4 0 9 7 8 7 6 4 4070 Fig. 8 Gear pump PU/8R P/N 9776J
BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 4070 Gear pump, PU/8R, D, heated Hexagon head screw, M6x0, DIN9, stainless 4 Disc spring, D., GR, DIN09 type A Pressure piece, PU-0/8 4 Turcon-Roto-Variseal, D, inside seal Sleeve, PU-0 6 O-ring, 6x 7 Ring 8 Allan head cap screw, M8x00/0.9, DIN9 9 Electric cover, PUS pumps, L9, CE 9 Notched taper pin,.x6., DIN77 0 Sign 0 Allan head cap screw, M4x0, DIN9, stainless Washer, D4., DIN type A 7889 Sealing electric cover, PUS pumps 64 Heater cartridge, /8 x, 0V-0W (refer to Other Electrical Components) 4 Allan head cap screw, M4x6, DIN9, stainless 067 RTD sensor, pump heating (refer to Other Electrical Components) 6 Luster terminal, ceramics, p..qmm 7 Set screw, M8x/4H, DIN9 8 Screw plug, /8NPTx7.mm, black 7 Safety valve, 00bar, ZS/BM/PUS (refer to Safety Valve) Front block, PU-0/8R, D O-ring, x 4 Parallel pin, D8m6x80, DIN6, hdn. Feather key A, 8x7x0, DIN688 6 Feather key A, 8x7x0, DIN688 7 O-ring, 4x 8 Pump shaft, PU/8, w/collar 9 Parallel pin, Dx70 0 O-ring, 9x. End block, PU-0/8, D, w/o bushing Pump block, PU/8 Gear A, PU/8m., D, w/o bushing 4 Gear B, PU/8m., D, w/o bushing - ID plate, 8x0, pumps Nordson - Notched taper pin,.7x4, DIN476 P/N 9776J
4 BM 00 EASY with Gear Pump Item P/N Description Quantity To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Box Code P/N 9776J
BM 00 EASY with Gear Pump Gear Pump, PU0/8R 0 9 4 6 7 8 9 4 8 8 7 0 8 7 4 6 8 4 0 9 7 8 7 6 4 4066 Fig. 9 Gear pump PU0/8R P/N 9776J
6 BM 00 EASY with Gear Pump Item P/N Description Quantity Box Code 400764 Gear pump, PU0/8R, D, heated Hexagon head screw, M6x0, DIN9, stainless 4 Disc spring, D., GR, DIN09 type A Pressure piece, PU-0/8 4 Turcon-Roto-Variseal, D, inside seal Sleeve, PU-0 6 O-ring, 6x 7 Ring 8 Allan head cap screw, M8x0/0.9, DIN9 9 Electric cover, PUS pumps, L9, CE 9 Notched taper pin,.x6., DIN77 0 Sign 0 Allan head cap screw, M4x0, DIN9, stainless Washer, D4., DIN type A 7889 Sealing electric cover, PUS pumps 64 Heater cartridge /8 x 0V-0W (refer to Other Electrical Components) 4 Allan head cap screw, M4x6, DIN9, stainless 067 RTD sensor, pump heating (refer to Other Electrical Components) 6 Luster terminal, ceramics, p..qmm 7 Set screw, M8x/4H, DIN9 8 Screw plug, /8NPTx7.mm, black 7 Safety valve, 00bar, ZS/BM/PUS (refer to Safety Valve) Front block, PU-0/8R, D O-ring, x 4 Parallel pin, D8m6x00, DIN6, hdn. Feather key A, 8x7x40, DIN688 6 Feather key A, 8x7x40, DIN688 7 O-ring, 4x 8 Pump shaft, PU0/8, w/collar 9 Parallel pin, Dx90 0 O-ring, 9x. End block, PU-0/8, D, w/o bushing Pump block, PU0/8 Gear A, PU0/8m., D, w/o bushing 4 Gear B, PU0/8m., D, w/o bushing - ID plate, 8x0, pumps Nordson - Notched taper pin,.7x4, DIN476 P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Box Code P/N 9776J
8 BM 00 EASY with Gear Pump Auto Aeration Valve 4 6 7 8 9 0 4 0 9 6 8 7 8 9 0 8 7 6 4 949 Fig. 0 Auto Aeration valve P/N 9776J
BM 00 EASY with Gear Pump 9 Item P/N Description Quantity Box Code 949 Auto aeration valve, VX A,B,F,G 7860 Allan head cap screw, M4x60, DIN9, stainless 4 09 O-ring, 8x 984 Turcon-Stepseal, D, inside seal 4 98 O-ring, 6.07x.78 04 Washer,.xx, EP 6 Circlip bore, D, DIN47 7 04 Modular cartridge 8 78974 Compression spring,.x.x7 9 60 Allan head cap screw, Mx8, DIN9, stainless 0 6848 O-ring, 7-0.+0x.+max.0.6-0 98 Piston, EB60V, D 94 Allan head cap screw, Mx0, DIN9, stainless 4 4864 O-ring, x 4 09 Sleeve, VX 9048 O-ring, 8x. 6 04 Flange, aeration, VX 7 8 O-ring, x. 8 764 O-ring, 4x 9 0 O-ring, x. 0 040 Needle seat, VX 08 Needle extension, D, L 09 Nozzle stem, D, L0 787 Safety valve, 0.bar, /4 4 000 Sealing ring, R/4, type:pdr-4 8878 Screw plug, G/4, DIN908 6 680 Circlip shafts, D, DIN47 7 04 Air connection 8 408 Set screw, Mx4/4H, DIN9 9 98 Cylinder, EB60V, D 0 44098 Sealing ring, 0xx 909 Connector, slip collar, D6-aG/8, L0., stainless To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
60 BM 00 EASY with Gear Pump Installation Kit 4 4 6 7 9 0 0 9 8 9476 Fig. Installation kit P/N 9776J
BM 00 EASY with Gear Pump 6 Item P/N Description Quantity Box Code 9476 Installation kit A,B,F,G 4 Silencer, R/8 448 Solenoid valve, 4/-ways, 4V/.9W, G/8, cpl. (refer to Other Electrical Components) 097 Hose nozzle, ar/8, Di6, SW 4 46700 Hose clamp, D8-, DIN07 67 Hose, grey, type:80-6. 00 mm 6 44098 Sealing ring, 0xx 7 40449 Thread-in fitting, -G-D06-G/8-000 8 000 Sealing ring, R/4, type:pdr-4 9 40078 Hose nozzle, ag/4, Di9, L8 0 80 Hose clamp, D0-6/9, DIN07 94697 Hose, grey, type:80-9. 00 mm 4867 Connection piece, ag/4-ig/4, 90, L, NW6 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
6 BM 00 EASY with Gear Pump Man. Aeration Valve 4 6 7 8 9 4 8 0 0 0 8 9 8 7 6 4 0796.0 Fig. Man. aeration valve P/N 9776J
BM 00 EASY with Gear Pump 6 Item P/N Description Quantity Box Code 0796 Man. aeration valve, VX R,C,P 94048 Bracket, aeration 408 Fitting, ig/8-ig/8 0 Sealing ring, R/8, type:odr-8 4 446 Air coupling,male, ag/8, L 007 Allan head cap screw, M4x0, DIN9-A-70 6 697 Double nipple, ar/4-ar/4 7 6960 Safety valve, 0.bar, /4 8 66 Sealing ring, R/4, type:pdr-4 9 8070 T-piece, xirp/4 0 40078 Hose nozzle, ag/4, Di9, L8 80 Hose clamp, D0-6/9, DIN07 94697 Hose, grey, type:80-9. 600 mm 4449 Air coupling, female, ir/4, NW7., L4, SW 4 94047 Pipe, double side, a=/8 6969 Reducer, ar/-irp/8, L4, NW 6 40878 Screw plug, G/8, with O-ring 7 09 Band-clamp, 409, type:4 8 464 Threaded bolt, M8x 9 06 Pipe clmap, Di40 0 780 Pipe, 8.x.4x000, double side, a=pg 40 mm 8 O-ring, x. 944 Flange, aeration, VX 009 Allan head cap screw, Mx, DIN9, stainless 4 9440 Aeration rod, compl. To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
64 BM 00 EASY with Gear Pump Air-relief Valve (Deaeration Valve) 8 7 6 4 444896 Fig. Air-relief valve (deaeration valve) P/N 9776J
BM 00 EASY with Gear Pump 6 Item P/N Description Quantity Box Code 444896 Air-relief valve BM00 ME - - 94 Ball valve, ways, ir/4-ir/4, DN6, PN0, VX 7808 Extension, L47, RAL900 600 Drip tray, L0, VX 4 77 Sealing ring, 4x8, DIN760 form A 697 Double nipple, ar/4-ar/4 6 006 Set screw, M4x4/4H, DIN9 7 4679 Allan head cap screw, Mx0, DIN9, stainless 8 49 Stop, RAL900 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
66 BM 00 EASY with Gear Pump Safety Valve (for Adapter Plate) 7 6 4 8 Fig. 4 Safety valve P/N 9776J
BM 00 EASY with Gear Pump 67 Item P/N Description Quantity Box Code 8 Safety valve, 00bar, MX - 4 406 Set screw, black, MX, max. 00bar 064 Compression spring,.x7.4x4.4 66 Piston, safety valve 4 08 O-ring, 6x 0 O-ring, x 6 4080 Valve element, safety, MX 7 9460 Set screw, M4x6/4H, DIN9 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
68 BM 00 EASY with Gear Pump Safety Valve (for PU-Pump) 8 7 6 4 H Fig. Safety valve P/N 9776J
BM 00 EASY with Gear Pump 69 Item P/N Description Quantity Box Code 7 Safety valve, 00bar, ZS/BM/PUS 0-66 piston, safety valve 08 o ring 6x 66 valve element, bypass 4 0 o ring x 09 o ring 8x 6 064 compression spring,x7,4x4,4 7 7 set screw black 00bar 8 867 guide nut, bypass VX To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
70 BM 00 EASY with Gear Pump Exhaust Hood The exhaust hood can be supplied as an accessory. When processing PUR a smooth melting plate is needed in addition. 4 4 6 7 8 0 9 8 7 46086 Fig. 6 Exhaust hood P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 46086 Exhaust hood, complete B,C,G,U 79884 Exhaust hood, complete 007 Allan head cap screw, M6x6, DIN9, stainless 009 Washer, D6.4, DIN type B 4 470 Allan head cap screw, M8x0, DIN9, stainless 4 68 Washer, D8.4, DIN type B, stainless 4 009 Allan head cap screw, M6x, DIN9, stainless 4 6 474 Hexagon nut, M8, DIN94, stainless 7 4798 Clamp, RAL900 8 46066 Clamp, RAL900 7988 Clamp 9 900 Hexagon nut, M6, DIN94 7 0 46089 Cross beam 46079 Container, exhaust hood B,C,G,U W B,C,G,U X B,C,G,U W To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
7 BM 00 EASY with Gear Pump 0 4, d c Belüftung manuell 9, 0, 40, 4 d d 4 6, 48 0, 8, 9 7, 8, 9, 4 6, 8 4 4 4, 4, 60 a a 0 6 4, 4 9, 4, 44, 47 d d 7, 0 4 6 Belüftung automatisch 4, 49, 0 d d 9, 6, 7, 9, 0, Status FREIGEGEBEN Maßstab P/N 0796 : Datum Name Zuschnittlg. 0 Gezeichnet 0 07 00 gabriele.goralski Rohmat. P/N Allgemeintoleranzen letzte Aend. 06 08 004 bernhard.meyer nach DIN ISO 768 m Werkstoff und DIN ISO 768 H Gesperrt Zust. 09//0 Änd.Mittlg.Nr. bme. Name 7.07.004 Datum PNEUMATIK KOMPL.O.SCHRANK Version Ersatz für BM00 0796 0 Ersetzt durch gabriele.goralski letzte Speicherung von / am: Blatt Schutzvermerk nach DIN ISO 606 beachten! Dienstag,. Juli 00 08:4:4 A B C D E F G H J K L M e b 4 4 d a d 6 6 d 7 7 b b d 8 8 d 9 9 e g f e d A B C D E F G H J K L 0796 g g 0//04 bme. 7.07.004 06/0/04 bme. 7.07.004 09/47/0 bme. 7.07.004 e g g f f e Pneumatic Compl. (Pneumatic Diagram) 0796_0 Fig. 7 Pneumatic complete (pneumatic diagram) P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 0796 Pneumatic, compl. w/o cabinet ÁÁÁÁÁ 0994 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ solenoid valve /ways 4V G/4 ÁÁÁÁÁ ÁÁÁÁÁ 444 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ filter and control valve LFR /4 D MINI ÁÁÁÁÁ ÁÁÁÁÁ 6 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ pressure control valve 0, 0bar G/4 ÁÁÁÁÁ 4 8087 distributor G/4 4x FR 4 /4 C ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 9466 mounting bracket HFOE D MINI ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 6 07904 air manifold G/4,G/8 7 ÁÁÁÁÁ 840 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ hollow screw single G/4 L6 ÁÁÁÁÁ 8 ÁÁÁÁÁ 8449 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ fitting G/4 xig/4 ÁÁÁÁÁ 9 ÁÁÁÁÁ 486 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ clamp DIN06 A 8x W ÁÁÁÁÁ 0 4967 plug type thread fitting G D08 D08 BHD ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 000 RO=8x L000 W.009 St.4 zinc plated.00 mm ÁÁÁÁÁ 78488 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ plug type thread fitting T D08 D08 CONN ÁÁÁÁÁ ÁÁÁÁÁ 4867 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ plug type thread in ftg. G D08 R/4 0000 ÁÁÁÁÁ 7 4 ÁÁÁÁÁ 48677 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ plug type thread in ftg. W D08 R/4 TURN ÁÁÁÁÁ 794 silencer R/4 ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 6 4867 connection piece ag/4 ig/4 90 L NW6 ÁÁÁÁÁÁ 7 ÁÁÁÁÁ 474 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ T piece xag/4 xig/4 ÁÁÁÁÁ ÁÁÁÁÁÁ 8 ÁÁÁÁÁ 9469 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ regulating valve G/4 ÁÁÁÁÁ ÁÁÁÁÁÁ 9 ÁÁÁÁÁ 4 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ reducer ar/4 irp/8 L ÁÁÁÁÁ 0 097 hose nozzle ar/8 Di6 SW ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 46700 hose clamp D8 DIN07 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 48900 plug type thread in ftg. G D06 M 0000 ÁÁÁÁÁÁ ÁÁÁÁÁ 64 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ male air coupling ar/4 NW7, L ÁÁÁÁÁ ÁÁÁÁÁÁ 4 ÁÁÁÁÁ 4009 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ plug type thread in ftg. W D06 R/8 TURN ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁ 4807 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ plug type thread fitting Y D06 D06 CONN ÁÁÁÁÁ 6 0 hollow screw single G/8 L7 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 7 46077 fitting x ig/8 ÁÁÁÁÁÁ 9 ÁÁÁÁÁ 44098 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ sealing ring 0xx ÁÁÁÁÁ ÁÁÁÁÁÁ 0 ÁÁÁÁÁ 8900 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ air operated hose D6,0 d4,0 PUR silver ÁÁÁÁÁ 00 mm ÁÁÁÁÁÁ ÁÁÁÁÁ 89009 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ air operated hose D8,0 d,7 PUR silver ÁÁÁÁÁ.000 mm 67 hose grey type:80 6,.00 mm ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 4009 non return restrictor valve GRLA /4 B ÁÁÁÁÁÁ 4 ÁÁÁÁÁ 48 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ coil hose, blue /4 L=,m ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁ 788697 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ plug type thread fitting L D08 D08 ÁÁÁÁÁ ÁÁÁÁÁÁ 8 ÁÁÁÁÁ 400 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ safety valve 7,bar /4 ÁÁÁÁÁ 9 66 sealing ring R/4 type:pdr 4 4 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 40 4980 cable channel 8x9 LF000 800 mm ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 4 4978 blind rivet 4x0 large head 4 ÁÁÁÁÁÁ 4 ÁÁÁÁÁ 8008 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ allan head cap screw M6x DIN9 SST ÁÁÁÁÁ ÁÁÁÁÁÁ 44 ÁÁÁÁÁ 0009 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ allan head cap screw M4x8 DIN9 SST ÁÁÁÁÁ 4 ÁÁÁÁÁÁ 4 ÁÁÁÁÁ 00 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ allan head cap screw M4x0 DIN9 SST ÁÁÁÁÁ 47 009 washer D4, DIN type A 7 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 48 66 allan head cap screw M6x0 DIN9 SST ÁÁÁÁÁÁ 49 ÁÁÁÁÁ 0077 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ allan head cap screw Mx8 DIN9 SST ÁÁÁÁÁ ÁÁÁÁÁÁ 0 ÁÁÁÁÁ 64 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ washer D, DIN type A ÁÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁÁ 48 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ connection piece ag/4 ig/4 L NW7 ÁÁÁÁÁ 94 allan head cap screw Mx0 DIN9 SST ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ 60 79868 shim plate BM0/00 valve ÁÁÁÁÁÁ 6 ÁÁÁÁÁ 497 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ screw plug G/4 DIN908 ÁÁÁÁÁ To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
74 BM 00 EASY with Gear Pump Indication Signs max.7, bar 4 max. 0, bar max. 8,0 bar 448684F Fig. 8 Indication signs P/N 9776J
BM 00 EASY with Gear Pump 7 Item P/N Description Quantity Box Code 448684 Indication sign, BM pneumatic, complete - - 077 Sign, lifting O lowering, self-adhesive 0700 Sign, two-hand control, self-adhesive 4770 Sign, max. 8,0 bar 4 47708 Sign, max. 0, bar 4778 Sign, max. 7, bar To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
76 BM 00 EASY with Gear Pump Cable Channel 4 4 4 6 7 4 6 4 6 7 6 4 0990.0 Fig. 9 Cable channel P/N 9776J
BM 00 EASY with Gear Pump 77 Item P/N Description Quantity Box Code 0990 Cable channel, complete - - 0984 Pipe, x.x80, double side, a=mx. 467 Lock nut, metal, metric Mx. 098 Pipe, x.x00, single side, a=mx. 4 0999 Pipe clamp, Di/ 0 464 Threaded bolt, M8x 6 0988 Rubber socket, type:9m, ID=, L=7. 7 0986 Pipe, x.x00 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
78 BM 00 EASY with Gear Pump Cable Channel 4 4 4 6 7 4 6 6 8 099.0 Fig. 40 Cable channel P/N 9776J
BM 00 EASY with Gear Pump 79 Item P/N Description Quantity Box Code 099 Cable channel, complete - - 0984 Pipe, x.x80, double side, a=mx. 467 Lock nut, metal, metric Mx. 098 Pipe, x.x00, single side, a=mx. 4 0999 Pipe clamp, Di/ 4 464 Threaded bolt, M8x 6 0988 Rubber socket, type:9m, ID=, L=7. 7 0986 Pipe, x.x00 8 06 Pipe clamp, Di40 To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. P/N 9776J
80 BM 00 EASY with Gear Pump Electric Complete (Electr. cabinet) Mounting Plate -N4 -R6 -N -N -N6-6N -4N6-4N -N6 -N -N6 -N -N6 -N -9N -8A -F -4F -F -F -F -9F -F -6F -F -F -76T -76T 000_F Fig. 4 Electric compl. (electr. cabinet) Mounting plate (part ) P/N 9776J
BM 00 EASY with Gear Pump 8 Item P/N Description Quantity Box Code -F 4467 Main circuit breaker, 6 A / pole - - -F 4 Circuit breaker, 0 A / pole - - -R7 0 Varistor - - -F 444 Circuit breaker, 0 A / pole - - -N 484 Solid state relay 0 A - - -N4 Cooling body Cover -9F 4799 Circuit breaker, 0 A - - -9N 0796 Solidstate relay, A - - -F 4799 Circuit breaker, 0 A - - -N 0796 Solid state relay A - - -N6 -F 4799 Circuit breaker, 0 A - - -N 0796 Solid State Relay A 7 -N6 -F 4799 Circuit breaker, 0 A 6-4F -F -N/-N6 0796 Solid state relay A 6 6-4N/-4N6 -N/-N6-6F 46986 Circuit breaker, 6 A - 4 496 Circuit breaker, 0 A 0 - -6N 7876 Assembly WS070, speed control, PR pump - 4 - Ferrite for drive 78780 Assembly WS070, pressure control, PR pump - 4 - Ferrite for drive 9 D 7886 Assembly WS00, speed control, PU pump 0 - - Ferrite for drive 78860 Assembly WS00, pressure control, PU pump 0 - - Ferrite for drive 9 D -76T 4098 Power supply, 4 V DC / 0 W - - -76T 40986 Power supply, 4 V DC / 7 W - - -8A 488 Temperature control module (NI0), CS0 - - Fuse, A (refer to Kits) To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Refer to Notes in this section for item information. Beginning 0/00 the connection designation of all circuit breakers will be changed. New circuit breakers will be marked with X pole. See Fig. 46. Continued on next page P/N 9776J
8 BM 00 EASY with Gear Pump Electric Complete (Electr. cabinet) Mounting Plate (contd.) -XLWT -XLP -XLR -XL9 -XLS -XL0 -XL8 -XLD -XLWZ -0A -8B -8A -A -A -9A -6K6 -XL -XL -K -0K -XL0 000 Fig. 4 Electric complete (electr. cabinet) Mounting plate (part ) P/N 9776J
BM 00 EASY with Gear Pump 8 : Refer to Notes in this section for item information. Item P/N Description Quantity Box Code -8B 484 Reference temperature sensor, CS0 - - -8A 488 Temperature control module, CS0 6 - Fuse, A (refer to Kits) -9A 784 Central processing unit, standard, CS0B Fuse, 6.A (refer to Kits) Fuse, A (refer to Kits) 7849 Central processing unit, CS0B, PROFIBUS Fuse, 6.A (refer to Kits) Fuse, A (refer to Kits) - - 0 P -0A 07744 EASY module progr. two-handed operation - - -0K 7904 Two hand relay 4V DC ESR4 NZ - - -A 987 - Analog module, pressure control, CS0 Fuse, A (refer to Kits) 9 D -A 40086 Motor module, CS0 Fuse, A (refer to Kits) - - -K 8 Relay MY4N D/4V DC w/indicating lamp - - 6998 Relay socket 4 pole PYF 4A E 699 Retaining clip f. Relay -6K6 7078 Contactor DILMC6(RDC4) - - 76747 Slave contactor block DILM0 XHI 9084 Termination plug, CS0 - - 908 Ribbon Cable, 0 mm 9 D 6 9086 Ribbon Cable, 00 mm - - 9087 Ribbon Cable, 800 mm - - 8899 Ribbon Cable, 600 mm - - -XLWT -XLWZ Warning light kit compl. (P/N 7870) Week timer/clock kit (P/N 7970) To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Refer to Notes in this section for item information. P/N 9776J
84 BM 00 EASY with Gear Pump Other Electrical Components -S -S4 -S -76K7-9A -9A -Q -E4 -T -E7-6M -B6-9B7-9E -9E -9B7-9E -9E 000_F Fig. 4 Other electrical components (part ) P/N 9776J
BM 00 EASY with Gear Pump 8 Item P/N Description Quantity Box Code -E4 64 Fan, compl. - - 464644 Filter element 4 - - -E7 64 Fan, compl. 4-464644 Filter element 4 -Q 667 Main switch, x 00 A - - -T 46697 Transformer 400 V, 40 KVA 4 - -B6 067 RTD sensor, platen (refer to Heating Punch/Melt Platen (smooth) or Heating Punch/Melt Platen (Finned, Hot Melt) ) -9B7 067 RTD sensor, pump heating (refer to Adapterplate for Gear Pumps PR.. or Gear Pumps PU..) -9E -9E 069 Heater Cartridge (refer to Adapterplate for Gear Pumps PR..) 64 Heater Cartridge (refer to Gear Pumps PU..) -6M 78866 AC Drive motor / gear box (refer to Drive WS070/PR) 4079 AC Drive motor / gear box (refer to Drive WS00/PUS) - - - - - 4 0 - - 4 0 - -76K7 7970 Week timer/clock kit Accessory -9A 97 Control panel, CS0, pump - - Fuse, A (refer to Kits) -9A 484 Temperature control panel, CS0 - - Fuse, A (refer to Kits) - 4860 Level switch, compl. - - -S 467 Microswitch (refer to Switch Rod) -S4 467 Microswitch (refer to Switch Rod) -S 467 Microswitch (refer to Switch Rod) - 467 Cover for microswitch -4H - Indicator light, PROFIBUS 0 P 460767 Lamp holder front side 460768 Mounting adapter 46077 Led lamp white To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate) must be considered. Refer to Notes in this section for item information. Continued on next page P/N 9776J