Footpegs & Foot 3 3
Forward Control Kits 3 Tribal Forward by Accutronix These unique forward controls feature a one-of-a-kind custom look that adds the finishing touch to your custom bike. Machined from aerospace grade 6061 T6 aluminum with a show-chrome finish and a 5/8"-diameter master cylinder bore. These controls also contain sealed bearings for superior performance and durability. Adjustable brake and shift assemblies for optimum riding comfort. Includes shift rod and mounting hardware. Master cylinder bore diameter measures 5/8". 644040 Fits all Softail models from 2000 to present..................................................$1,097.95 Note: Kickstand installation requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. Optional Matching Tribal Grips and Footpegs 644041 Male mount passenger footpegs (sold in pairs).................................................$162.88 644042 Handlebar grips (sold in pairs)..................................................................$149.95 Footpegs & Foot Diamond Forward with Knurled Pegs by Accutronix These chrome billet forward controls feature a smooth bend in the shift and brake lever for that contoured look. Topped off with beautiful knurled toe peg and footpegs. These controls also contain sealed bearings for superior performance and durability. No more worry about pegs and/or levers coming loose. The brake and shift levers are adjustable for optimum riding comfort. Includes shift rod and all mounting hardware. Master cylinder bore diameter measures 5/8". Matching knurled rear pegs and hand grips are available. 660150 Fits all Softail models from 1984 thru 1999........................................................$959.30 660151 Without kickstand mount for all Softail models from 1984 thru 1999 (for models that mount the kickstand behind the primary to provide a clean flush finish).......................$959.30 660152 3" extended forward controls for all Softail models from 1984 thru 1999..........................$959.30 660153 Fits all Softail models from 2000 to present.......................................................$959.30 660154 3" extended forward controls for all Softail models from 2000 to present..........................$959.30 Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. Note: Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. Optional Matching Grips and Footpegs 656692 Knurled rear pegs (sold in pairs)..................................................................$128.60 656690 Knurled hand grips (sold in pairs)................................................................$119.55 3.02 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Forward Control Kits Apparel Bike Kits & Trailers 44523 Slotted 44571 Ball Milled 44498 Seats & Bags Foot Hand Chrome Billet Forward by Accutronix These top-quality, American-made forward controls are machined from aerospace grade 6061-T6 aluminum. Features include splined shafts for complete adjustability, and sealed roller bearings. Kits come complete with shift rods, brake rods and mounting hardware. For FX Softail Models from 1984 thru 1999 Engineered to mount in the stock position on FXST, FXSTC and FXSTS models. Uses the Original Equipment master cylinder (not included). Standard Length 44501 Ball milled style..........................................................$739.95 44502 Slotted style.............................................................$739.95 3"Extended 44504 Ball milled style..........................................................$749.95 44505 Slotted style.............................................................$749.95 Note: Custom brake lines are required. Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. For FX Softail Models from 2000 to Present Each kit includes new shifter and brake rods. Standard Length 44574 Ball milled style..........................................................$891.99 44575 Slotted style.............................................................$891.99 3"Extended 44577 Ball milled style..........................................................$924.69 44578 Slotted style.............................................................$924.69 Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. For Dyna Glide Models Utilizing a special backing plate, the controls move your foot position a full 12" forward from the stock position on Super Glide models. Fit all models from 1991 to present. Standard Length 44507 Ball milled style..........................................................$753.95 44508 Slotted style.............................................................$753.95 3"Extended 44510 Ball milled style..........................................................$769.95 44511 Slotted style.............................................................$769.95 For FL Softail Models and Custom Application Big Twins from 1986 thru 1999 Includes 5/8"-bore chrome master cylinder. Will mount on 4-speed and rigid frames, but may require shift rod modifications. Note: The 3" extended kit is not recommended for FL Softail models due to a lack of fender clearance. Standard Length 44522 Ball milled style..........................................................$849.84 44523 Slotted style.............................................................$849.84 3"Extended 44525 Ball milled style..........................................................$877.64 44526 Slotted style.............................................................$877.64 For Rubber-Mount Touring Models Ideal for those who want to stretch out on their Dresser, and if you want that custom look without floorboards. Fit Touring models from 1997 to present. Use the Original Equipment master cylinder and install with regular hand tools. 44571 Ball milled style..........................................................$840.89 44572 Slotted style.............................................................$840.89 Slotted Shorty Forward for Softail Models by Accutronix Chrome billet forward controls sit 2" back compared to stock controls. Adjustable brake and shift assemblies for optimum riding comfort. Comes slotted with rubber pegs.......$924.69 44592 Fits all Softail models from 1984 thru 1999 and custom models Note: Custom brake lines are required. Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. Passenger Footpegs Matching male mount passenger footpegs to complement the forward controls..................................$128.99 44498 Sold in pairs 44498 Elite Slotted Forward for Softail Models by Accutronix Elite chrome forward controls have a soft double bend for great looks and sealed bearings for great performance. Adjustable brake and shift assemblies for optimum riding comfort. Comes slotted with rubber pegs...............$936.99 44595 Fits all Softail models from 1984 thru 1999 and custom frames 44596 Fits Softail models from 2000 to present Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. Note: Installation on 1984 thru 1986 Softail models requires relocation of the oil filter. Passenger Footpegs Matching male mount passenger footpegs to complement the forward controls..................................$128.99 44498 Sold in pairs Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.03 Cross Reference
Forward Control Kits 3 Footpegs & Foot Supreme Legends USA Classic Forward Control Kits The most economical high-quality billet forward controls Supreme Legends USA has to offer. Choose from highly-polished or chrome finishes. Newly-improved quality upgrades for the strongest, smoothest fit possible Manufactured in the USA from 6061-T6 billet aluminum and precision CNC-machined to the highest standards possible Rubber is UV resistant, and long-lasting Include chrome mounting hardware (do not include brake line or shift linkage) Master cylinder utilizes a 3/4"-bore, and is compatible with all current brake systems 47870 Supreme Legends USA Premium Forward Control Kits Award-wining and beautifully-crafted billet forward controls from Supreme Legends USA. Available only with a chrome finish. Available with Ribbed Pegs for your Pleasure For Twin Cam 88 Softail Models Fits all FX Softail models from 2000 to present. Can also be installed on FL Softail models if floorboard are removed. 644022 Polished with rubber band footpegs........................$470.00 644023 Chrome with rubber band footpegs........................$570.00 644024 Polished with ribbed footpegs..............................$470.00 644025 Chrome with ribbed footpegs..............................$570.00 Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. For 4-Speed FL/FX Models and 5-Speed Softail Models Fit 4-speed models from 1958 thru 1986 (except 4-speed Softail models), and all 5-speed Softail models from 1986 thru 1999. 47870 Polished with rubber band footpegs........................$470.00 47871 Chrome with rubber band footpegs........................$570.00 47872 Polished with ribbed footpegs..............................$470.00 47873 Chrome with ribbed footpegs..............................$570.00 Note: Custom brake lines are required. Note: Installation on 1986 Softail models requires relocation of the oil filter. For all Dyna Glide Models from 1991 to Present 47874 Polished with rubber band footpegs........................$470.00 47875 Chrome with rubber band footpegs........................$570.00 For all FXR Models from 1982 thru 2000 47878 Polished with rubber band footpegs........................$470.00 47879 Chrome with rubber band footpegs........................$570.00 Replacement Parts 693584 Master cylinder rebuild kit for CC # s 47870 thru 47879.......$22.00 Newly-improved quality upgrades for the strongest, smoothest fit possible Manufactured in the USA from 6061-T6 billet aluminum and precision CNC-machined to the highest standards possible Designed with smooth end caps to hide assembly hardware Side port master cylinder included for running a hidden brake line Folding or solid footpegs available Includes chrome mounting hardware (does not include brake line or shift linkage) Matching handlebar grips and footpegs available separately with Master Cylinder Integrated master cylinder uses banjo bolt fitting on the backside where it s nearly invisible. Innovative design and flawless chrome make these sets a custom show stopper. Include hardware and shifter rod. Master cylinder utilizes a 9/16"-bore and is compatible with all current brake systems. 644026 Solid footpegs. Fits all Softail models from 2000 to present (uses stock shift rod).......................................$760.00 47106 Solid footpegs. Fits all 5-speed Softail models from 1986 thru 1999 (uses stock shift rod).............................$760.00 644027 Fold-up footpegs. Fits all Softail models from 2000 to present (uses stock shift rod).......................................$785.00 060330 Fold-up footpegs. Fits all 5-speed Softail models from 1986 thru 1999 (uses stock shift rod).............................$724.95 060331 Fold-up footpegs. Fits FXR models from 1982 thru 2000.....$789.99 060332 Fold-up footpegs. Fits Dyna Glide models from 1991 to present.................................................$724.95 47852 Master cylinder rebuild kit..............................$49.95 Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. Note: Installation on 1986 Softail models requires relocation of the oil filter. Using Stock Master Cylinder These controls were designed to replace stock mid-mount or forward controls and work with the stock rear master cylinder. Included are brackets, brake rod, and chrome mounting hardware. 47100 Solid footpegs. Fits 5-speed FX Softail models from 1986 thru 1999 (uses stock brake and shift rods)..................$599.00 060321 Fold-up footpegs. Fits FXR models from 1982 thru 2000.....$789.99 47102 Solid footpegs. Fits Dyna Glide models from 1991 thru 1999..................................................$599.00 Note: Installation on 1986 Softail models requires relocation of the oil filter. Optional Matching Grips and Footpegs 644021 Handlebar grips (sold in pairs)...............................$78.00 47104 Angle mount passenger pegs (sold in pairs)..................$77.00 47105 Straight mount passenger pegs (sold in pairs)................$77.00 3.04 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Supreme Legends USA Pro-Smooth Forward Control Kits Provide a superior blend of form and function at affordable prices. These stylish billet forward controls are available with a show-quality chrome finish. Newly-improved quality upgrades for the strongest and smoothest fit possible Manufactured in the USA from 6061-T6 billet aluminum and precision CNC-machined to the highest standards possible Designed with smooth end caps to hide assembly hardware Side port master cylinder included for running a hidden brake line Rubbers are UV resistant, and long-lasting Includes chrome mounting hardware (does not include brake line or shift linkage) Master cylinder utilizes a 3/4"-bore and is compatible with all current brake systems Matching handlebar grips and footpegs available separately 2" extended forward controls are also available Standard Forward 643000 Fits FX Softail models from 1984 thru 1999...............$650.00 643001 Fits FX Softail models from 2000 to present..............$650.00 643002 Fits Dyna Glide models from 1991 to present..............$650.00 643003 Fits FXR models from 1982 thru 1994....................$650.00 2" Extended Forward 643004 Fits FX Softail models from 1984 thru 1999...............$675.00 643005 Fits FX Softail models from 2000 to present..............$675.00 Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. Optional Matching Grips and Footpegs 643009 Handlebar grip set................$79.00 643007 Rear footpeg set..................$89.00 643007 Replacement Parts 643006 Footpeg set (includes clevis)................................$121.00 643008 Toe peg set.................................................$61.00 Pro-One Chrome Billet Forward Exclusive styling features and innovative engineering are beautifully combined in this Pro-One design. Mounting plates and levers are machined from 6061-T6 aircraft quality aluminum with stainless steel footrest mounts and lever shafts. Smooth control operation is assured by roller and thrust bearings on all pivot points to eliminate any slop or play. Includes mounting hardware, master cylinder, and stainless steel shift rod..........$839.95 65293 Fits 4-speed FL and FX models from 1958 thru 1986 (except 4-speed Softail models), and 5-speed Softail models from 1986 thru 1999 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. Choppers Inc. Devil s Tail Foot The same foot controls used on Billy Lane s Devil in a Red Dress bike and the Miss Behavin bike, which was built for the Discovery Channel s biker build-off between Billy Lane and Roger Bourget...................$829.99 Can be used as jockey shift Fits all Softail models 1984 thru 1999 Bolts to stock mounts and uses stock master cylinder Comes with everything pictured 611230 Complete kit Hand Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Driveline Chrome Forward Control Kits for Big Twin Models These affordable kits include O-ring footpegs and toe pegs, and chrome master cylinders. The brake pedals and shift levers ride on bronze bushings giving smoother pedal action. The footpeg supports have female clevis that will accept most aftermarket footpegs. Kits include installation instructions, a universal nylon brake line kit, mounting hardware and a selection of shifter rods. Fit all 4-speed FL, FX models from 1958 thru 1986 (except 4-speed Softail models), and 5-speed Softail models from 1986 thru 1999..................................$370.29 17565 Kit with 3/4"-bore master cylinder for use with stock calipers 17586 Kit with 5/8"-bore master cylinder for use with aftermarket calipers Note: Some late model FXs were manufactured without a mounting tab on the right end of the lower engine mount crossmember. These motorcycles require the additional purchase of a CC #17503 Weld-on Frame Tab which is sold separately. Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.05 Cross Reference
Forward Control Kits 3 Footpegs & Foot Excel EL Series Forward Features CNC machined billet aluminum construction, bronze bushing bearings and excellent quality. Brake line connection is hidden behind the master cylinder giving the controls a clean, sleek look. Includes a set of Full Rubber footpegs. All mounting stainless steel hardware included. Fits all Softail models from 1984 thru 1999. Available in a polished aluminum finish.....................$459.99 606100 3/8" master cylinder bore 606101 5/8" master cylinder bore Excel Standard Quick Shift Forward Excel standard forward controls are built with comfort and durability in mind. The smooth performance of these controls make them a favorite among riders who need functionality with a show quality appearance. Features CNC machined billet aluminum construction, adjustable levers and hidden brake line mount. Shifter features an adjustable quick shift lever to make shifting easy and precise. Stainless steel, polished hardware connects it all to your frame. Available in chrome finish. They fit all Softail models from 1984 thru 1999. Footpegs and shifter toe peg are sold separately as a set. Select from the styles below........................$649.99 606102 3/8" master cylinder bore 606103 5/8" master cylinder bore Excel HE Series Forward The HE series High End forward controls combine great quality in a sleek package. Features a unique integrated master cylinder reservoir, needle roller bearing movement and a hidden brake line mount, making these controls the envy of your friends. Adjustable levers and stainless steel hardware complete the package. When you want your bike to have a clean look, there is nothing better than HE forward controls. They all Softail models from 1984 thru 1999. Available in chrome finish. Footpeg and shifter toe peg are sold separately as a set. Select from the styles below........$799.99 606104 3/8" master cylinder bore 606105 5/8" master cylinder bore Radial Full Straight Straight Spiral Spiral Full Excel Footpeg Sets Innovative chrome billet designs include the forward control footpegs and a shifter toe peg. 35820 Spiral Rib footpeg set................$139.00 35823 Full Rubber footpeg set..............$139.00 644050 Straight Rib footpeg set..............$139.00 644051 Radial Rubber footpeg set............$139.00 Radial Excel Optional Passenger Pegs 35825 Spiral Rib male mount pegs..........$124.00 35826 Straight Rib male mount pegs........$124.00 35828 Full Rubber male mount pegs........$124.00 644052 Radial Rubber male mount pegs......$124.00 3.06 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Chrome Billet Forward Control Kits by Billet Concepts Beautiful chrome-plated billet aluminum forward control kits. Available with pegs in the stock location or 3" extended for more leg room. Kits do not include brake lines or shift rods. For 4-Speed FL/FX Models and 5-Speed Softail Models Fit 4-speed models from 1958 thru 1986 (except 4-speed Softail models), and all 5-speed Softail models from 1986 thru 1999. 47300 Kit with rubber belted footpegs............................$800.79 47302 3" extended kit with rubber belted footpegs................$949.99 47301 Kit with ball milled footpegs...............................$800.79 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. For all FXR Models from 1982 thru 2000 47304 Kit with rubber belted footpegs............................$799.99 For all Dyna Glide Models from 1991 to Present 47306 Kit with rubber belted footpegs............................$799.99 Replacement Parts 26101 Master cylinder rebuild kit...................................$17.49 47375 Master cylinder (sold each).................................$192.99 47376 Rubber belted footpeg (sold each)...........................$54.99 47377 Rubber belted shifter peg (sold each)........................$36.49 47378 Beauty cone for brake pivot (sold each)......................$19.99 47380 Brake pedal pad (sold each).................................$57.99 060343 Replacement rubber rings (sold as set).......................$24.49 Thunder Cycle Design Forward Control Kit Same forward controls featured on Eddie Trotta's Camel series and on the Discovery Channel Bike Build-Off. Machined from billet aluminum with a show-chrome finish and a 3/4"-diameter master cylinder bore. 644000 Fits all Softail models from 1986 thru 1999 (brake and shifter toe pegs and forward control footpegs sold separately)........$599.00 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. 644032 Fits all Softail models from 2000 to present...............$$611.50 Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CCI# 12214 (OEM 50041-80A) chrome kickstand mounting bracket. Death Series Forward Control Folding Footpegs with Ball Detent Choose from a variety of stylish patterns. Footpegs measure 81/2"-long and are sold in pairs. 644011 Twisted........................$159.00 644012 Crossed........................$159.00 Ball Milled 644013 Speared........................$159.00 644014 Ball milled pattern..............$159.00 644015 Smooth........................$159.00 Twisted Death Series Toe Pegs Available in smooth pattern only, and sold each. 644016 Smooth (3"-long)................$39.95 644017 Smooth (4"-long)...............$49.95 Crossed Smooth Optional Death Series Folding Rear Footpegs with Ball Detent Choose from a variety of stylish patterns. Footpegs measure 61/2"-long and are sold in pairs. Speared 644001 Twisted....................................................$159.00 644002 Crossed....................................................$159.00 644003 Speared...................................................$159.00 644004 Ball milled.................................................$159.00 644005 Smooth....................................................$159.00 Optional Death Series Handlebar Grips Fit all models from 1973 to present (except those with handlebar air reservoirs) sold in pairs. 644006 Twisted....................................................$159.95 644007 Crossed....................................................$159.95 644008 Speared...................................................$159.95 644009 Ball milled.................................................$159.95 644010 Smooth....................................................$159.95 Hand Lighting Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forward for Softail Models by Billet Concepts Simple and efficient single shaft design. Integrated ball detent folding pegs share a single shaft with shift and brake levers for rattle-free performance. Chromeplated billet aluminum construction accented with stepped machined details and rubber band style pegs. 47368 Fits 4-speed FL and FX models from 1958 thru 1986 (except Softail models) and 5-speed Softail models from 1986 thru 1999..........$614.99 47371 Fits all Twin Cam 88 Softail models from 2000 to present.........$849.99 Note: Custom brake lines are required. Note: Kickstand installation on 2000 and later Softail models requires the additional purchase of a CC #12214 (OEM 50041-80A) chrome billet kickstand mounting bracket. Note: Installation on 1986 Softail models requires relocation of the oil filter. Forks & Shocks Sheetmetal General 3.07 Cross Reference
Forward Control Kits 3 Footpegs & Foot BDL Forward by Dalton Designs These show-quality forward controls are CNC-machined from billet aluminum. Features hidden hardware securing the master cylinder cover, pivot points and footpegs. Adjustable brake and shifter lever height. Side brake hose port. Direct brake actuation eliminates the flex often found in heim joints. Fit Softail models from 1986 thru 1999. 06700 Chrome..................................................$637.50 06701 Polished..................................................$576.79 Replacement Parts 060393 Shifter/brake pegs (sold in pairs)............................$89.99 060394 Footpegs (sold in pairs).....................................$89.99 06718 Master cylinder top gasket..................................$6.99 605010 Master cylinder rebuild kit.................................$15.49 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. Thunder Heart Chrome Billet Forward Quality, CNC-machined billet components have brilliant chrome-plating. Includes raised pegs that mount to control shaft for cleaner looks and better feel, as well as a shifter rod and master cylinder. Available in standard or 2" extended versions for 5-speed Softail models from 1986 thru 1999. 30160 Standard length...........$833.74 30161 2" extended...............$879.99 49219 Rear pegs (sold in pairs)....$154.99 Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. 30160 49219 Chrome Billet Forward Control Kits Billet aluminum forward control kits include all mounting hardware to fit all 4-speed FL, FX and FXWG models from 1958 thru 1986, and 5-speed Softail models from 1986 thru 1999.................................$499.99 46605 Kit with 5/8"-bore master cylinder for use with stock and single-piston calipers 46607 Kit with 3/4"-bore master cylinder for multi-piston and multiple rear calipers Note: Custom brake lines are required. Installation on 1986 Softail models requires relocation of the oil filter. 3.08 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Forward Control & Extension Kits Apparel Bike Kits & Trailers Seats & Bags 07411 Foot JayBrake Radial Slotted Forward Control Sets for Softail Models Redesigned JayBrake forward controls reflect the new sleeker look of the radially machined foot controls and the softer imaging of edges. While offering the same strength and show quality workmanship that has gone into every set of JayBrake forward controls. Includes right and left controls in a brilliant chrome finish. For Softail Models from 2000 to Present 07406 Wide Bands pegs 3/4"-bore master cylinder...............$1,088.95 07407 Wide Bands pegs 5/8"-bore master cylinder...............$1,088.95 07408 Full Rubber pegs 3/4"-bore master cylinder...............$1,088.95 07409 Full Rubber pegs 5/8"-bore master cylinder...............$1,088.95 07410 Dove Tail Strips pegs 3/4"-bore master cylinder............$1,193.75 07411 Dove Tail Strips pegs 5/8"-bore master cylinder............$1,193.75 For Softail Models from Late 1987 thru 1999 07431 Wide Bands pegs 3/4"-bore master cylinder................$892.75 07432 Wide Bands pegs 5/8"-bore master cylinder................$892.75 07433 Full Rubber pegs 3/4"-bore master cylinder.................$892.75 07434 Full Rubber pegs 5/8"-bore master cylinder.................$892.75 07435 Dove Tail Strips pegs 3/4"-bore master cylinder.............$978.75 07436 Dove Tail Strips pegs 5/8"-bore master cylinder.............$978.75 Ness-Tech Radius Forward Control Kits Integral 3/4"-bore master cylinder for incredible stopping power Master cylinder linkage is hidden and shift controls feature teflon bushings for smooth operation CNC-machined from 6061-T6 aluminum before being chrome-plated Accepts any male mount footpegs or mini floorboards and shift pegs (not included) Includes custom kickstand mount and custom shifter rod......$999.95 04950 Stock length for Softail models from 2000 to present 04952 Stock length for Softail models from 1984 thru 1999 04954 Stock length for Dyna Glide models from 1993 to present 04951 3" extended for Softail models from 2000 to present 04953 3" extended for Softail models from 1984 thru 1999 Note: There is no provision for a brake light switch on these forward controls. We recommend the use of a CC #14137 Banjo Bolt Brake Switch. Hand Lighting Electrical Exhaust Intake Engine Gaskets Ness-Tech Forward Control Extensions for 2000-Up Softail Models Relocates the Original Equipment foot controls 3"-forward to increase legroom. Includes a pair of black anodized billet aluminum adaptor plates, extended stainless steel rear brake line, extended shifter rod, kickstand spring, pin, and mounting hardware...............................$179.95 05806 Fits all Twin Cam 88 FX Softail models from 2000 to present Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks JayBrake 2" Extension Kits for Softail Models Chrome-plated brackets and rods give you an extra 2" of legroom. They fit all Softail models from 1987 thru 1999 equipped with JayBrake forward controls. 07437 Classic.....................................................$174.20 07438 Sculpted...................................................$200.00 ZCB Forward Control Adaptors Allows you to use any 1999 and earlier forward controls on any of the Twin Cam 88 Softail models. Sold in sets...........................$159.59 86673 Fits all Softail models from 2000 to present Sheetmetal General 3.09 Cross Reference
Forward Control Kits Style A Style B 3 Footpegs & Foot Extended Forward Control Kits for Softail Models Designed just for you big bikers 6 ft. or taller, these chrome-plated kits extend the footpegs four inches further forward. Unlike the stock forward controls, our kits also bring the footpegs level with each other providing the rider with a more secure feeling and better control. So that you don t have to lift your feet for braking and shifting, our kits retain the stock pegto-pedal distances by utilizing many of the major components from your bike along with longer shifter and brake rods. The backing plates are made from 5/16" billet steel for superior strength. Installs in less than one hour. Includes all necessary parts and detailed instructions. 17558 Fits early 1987 FX Softail models with top-finned caliper (also fits 1986 models if the oil filter is relocated)............$213.69 17559 Fits FX Softail models from late 1987 thru 1999 (with smooth caliper)......................................$226.69 Note: 1990-up models will require the additional purchase of an OEM 33660-85 or equivalent shifter arm. Another simpler option is to enlarge the shifter shaft bushing in our backing plate to 9/16"-diameter (.5625") using a drill bit or reamer. Style A Available For Twin Cam 88 Models RST New Design Forward Uniquely-shaped, billet aluminum forward controls with TÜV approval for 4-speed Big Twins, Softail, Dyna Glide, Sportster and Twin Cam 88 models. Available with Rubberband and Knurled peg designs. The versions for 4-speed Big Twins and Softail models up to 1999, and the controls for Twin Cam 88 models are extended 3 cm. Style B Fit all 4-Speed FL and FX Models from 1958 thru 1986, and 5-Speed FX Softail Models from 1986 thru 1999 (3cm extended) 86890 Style B ( Rubberband ).....................................$1,017.00 86891 Style A ( Knurled ).........................................$1,102.00 Fit Twin Cam 88 Softail Models from 2000 to Present (3cm extended) 86894 Style B ( Rubberband ).....................................$1,200.00 86895 Style A ( Knurled ).........................................$1,200.00 Fit Sportster Models from 1991 thru 2003 86892 Style B ( Rubberband ).....................................$1,200.00 86893 Style A ( Knurled ) with TÜV.................................$1,200.00 Fits Dyna Glide Models from 1991 to Present 86896 Style B ( Rubberband ).....................................$1,017.00 Fits FXR Models from 1982 thru 2000 86897 Style B ( Rubberband ).....................................$1,017.00 RST New Design Black Powder Coated Extended Aluminum Forward Uniquely-shaped forward controls with TÜV approval for 4-speed Big Twins and Softail models. The versions for Big Twins thru 1999, and 2000-up Twin Cam 88 models are 3 cm extended. 686493 Fits 4-speed FL and FX models from 1958 thru 1986 (except Softail models) and 5-speed Softail models from 1986 thru 1999..$1,165.00 686492 Fits all Twin Cam 88 Softail models from 2000 to present..$1,378.00 3.10 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
060050 Forward Control Kits Apparel Bike Kits & Trailers 17553 17554 Seats & Bags Foot Hand 130423 Lighting OEM-Style Forward Control Kits Chrome-plated kits for OEM style floorboards or 3/8" stud mount custom footpegs. The shifter kit has a splined shift lever and arm, shift peg, braced shifter backing plate, FL and FX shifter rods, and mounting hardware. The brake kits are available with or without master cylinder, and include a backing plate, brake pedal, brake pedal stop, return spring, plunger, and mounting hardware. Forward Shifter Kit 17553 For 4-speed Big Twins 1952 thru 1985..................................................$104.99 Forward Brake Kits with Master Cylinder 17554 For 4-speed Big Twins 1970-early 1979.................................................$144.99 17556 for 4-speed Big Twins 1958 thru 1969..................................................$149.99 Forward Brake Kits without Master Cylinder 17555 For 4-speed Big Twins 1970-early 1979..................................................$86.99 17557 For 4-speed Big Twins 1958 thru 1969...................................................$93.99 Electrical Exhaust Intake Engine Chrome Forward This chrome forward control kit converts mid-shift FX or FL models with floorboards to the clean smooth lines of late Softail models. Constructed of heavy-gauge steel, both the brake and shift sides are chrome-plated and come complete with footpegs and mounting hardware. They are also available separately. Master cylinder sold separately..........$235.99 130348 Includes shift (CC #060050) and brake (CC #130423) assemblies Forward Control Shifter Kit Features a heavy-duty mounting bracket and rubber pegs with chrome end caps. Kit comes complete with linkage for ratchet top (1952-early 1979) and rotary top (late 1979-1986) shifters. Fits 4-speed Big Twin models from 1952 thru 1986 and 5-speed Softail models from 1986 thru 1999. 060050 Forward shift kit................$130.19 060043 Replacement backing plate......$54.49 Note: FX models must re-use existing original Equipment shift rod end. Forward Control Brake Kit Features a heavy duty mounting bracket and rubber pegs with chrome end caps. Available for 4-speed Big Twin models from 1970 thru 1986 with Wagner or Kelsey-Hayes style 1-piece master cylinder. Kit comes complete with mounting bracket, brake pedal, master cylinder plunger, footpeg and hardware. 130423 Forward brake kit..............$147.99 139003 Replacement backing plate for Wagner or Kelsey-Hayes master cylinders.$67.49 139005 Replacement pedal return spring..$4.99 Note: Master cylinder sold separately Forward Brake Kit with Master Cylinder This brake control kit includes a chrome Wagner-style master cylinder, brake pedal, backing plate, return spring, plunger, pedal stop and hardware......................$142.99 060031 Fits Big Twin models 1973-early 1979 (disc brake) Weld-On Frame Tab Weld-on right hand side frame mounting tab for all late model 4-speed Big Twins without the Original Equipment mounting tab. 17503 Sold each.........................$6.54 Forward Shifter Kit This original style replacement forward control set features a heavy duty mounting bracket and comes complete with ratchet top dust cover and arm. Fits FL models from 1952-early 1979 and FX models from 1971 thru 1973. Also can be used as a forward shift conversion kit on FX models from 1974-early 1979, however it will reverse the shift pattern.........................$89.99 060028 Works with floorboards or footpegs 3.11 Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General Cross Reference
Forward Control Kits 3 Footpegs & Foot Forward for Dyna Glide Models Available in stock or 2"-extended length. Extension kit moves Original Equipment forward controls on Dyna Wide Glide models 2" farther forward. Complete kits include ribbed foot and shifter pegs, mounting plates, control arms and all hardware. The extension kit includes chrome mounting plates with shifter and brake rods, re-using other forward control components. Fit all Dyna Glide models from 1991 to present. 17635 Stock length kit..........................................$420.17 17636 2" extended kit..........................................$399.99 17637 Extension kit for FXDWG forward controls.................$95.99 Forward Control Set for FXR Models An easy-to-install, American-engineered forward control assembly for all of the 5-speed FXR models from 1982 thru 1994 whether Shovelhead or Evolution -powered. Simple installation does not require the primary cover to be removed. All parts are show-chromed. A chrome cap for the thruthe-case shifter, and a complete hardware set are included. 17550 Complete kit, includes brake and shifter control............$352.99 17514 Replacement shifter shaft cover and screw for CC #17550....$10.99 17548 Replacement brake pedal...................................$49.99 17504 Replacement shift lever.....................................$16.29 060158 130417 Santee Forward Control Kit for FX Models A complete kit for moving the FX mid-mount controls to a more comfortable position near the front frame downtubes. Fits all FX models from 1973 thru 1985 with mid-mount controls regardless of which of the three Original Equipment master cylinders are fitted. All major components are flawlessly chrome-plated including the ribbed pegs. Oversized rubbercovered brake and shifter toe pegs and hardware are included. 08948 Fits all FX models from 1973 thru 1985 (except Softail and 4-speed FXWG models)................$429.99 3.12 Prices appearing in this catalog are Suggested Retail Price and are subject to change* Chrome Forward for Softail Models These stock-style forward controls replace the Original Equipment black painted units with brilliant chrome-plated parts. Brake and shift kits are sold separately and come complete with footpeg and mounting hardware. Brake Control Kits Original brake master cylinder and linkage is retained. Kit for 1982-early 1987 models also works well as a mid shift conversion on 4-speed FL models with remote reservoir master cylinders. 130415 Fits FX Softail and 4-speed FXWG models 1982-early 1987..$119.99 130417 Fits FX Softail models from late 1987 thru 1988.............$129.99 130418 Fits FX Softail models from 1989 thru 1999.................$111.99 Shift Control Kit Features our heavy-duty investment cast bracket and comes complete with shift rod with rod ends. 060158 Fits 5-speed FX Softail models from 1986 thru 1999.........$115.64
Floorboard Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Foot Hand Lighting Electrical Exhaust Chrome Billet Aluminum Floorboard Unique forward controls with integral floorboard mounts by Billet Concepts that set the standard for function with style. They feature onboard master cylinders with hidden brake line ports, and stepped billet styling on all arms, levers and control surfaces. 47370 Fits Softail models from 1987 thru 1999...................$906.99 47898 Fits all FXR models from 1982 thru 2000....................$999.99 Note: Installation on FXR and Softail models may require custom brake lines, and installation on 1986 and earlier FX Softail models requires oil filter relocation. Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Floorboard Forward Control Kit for Softail Models by Khrome Werks Provides full support while riding by moving the controls almost 3 inches further forward. Utilizes the stock shift lever, with hinged chrome-plated steel floorboards. This kit includes a new rear brake pedal and is recommended for riders under 6 feet tall because the brake pedal provides a more upright position. Fits all FX Softail models from 1986 thru 1999.....$580.64 31610 Complete kit Note: Installation on 1986 models requires relocation of the oil filter. Floorboard Forward for Softail Models Chrome shifter and brake side controls with floorboards. Includes chromeplated mounting brackets, floorboards, brake pedal and heel/toe shift levers, and chrome master cylinder with cover. Use as a chrome replacement for FL Softail models, or swap from pegs to floorboards on FX Softail models, or add forward control floorboards to scratch-built machines. Fits all Softail models from 1987 thru 1999.............................$444.99 22080 Complete chrome floorboard kit Note: 1986 and earlier models require brake line modifications and relocation of the oil filter. 3.13 Forks & Shocks Sheetmetal General Cross Reference
Forward & Specialty 3 Footpegs & Foot Chrome Forward Control Kits for Late Sportster Models Features integrated shift lever and brake lever on the footpeg shaft. Similar to the stock style forward controls found on Sportster models from 1998 to present that are equipped with OEM style forward controls. Fits 5-speed Sportster models from 1991 thru 2003. All chrome hardware and instructions included (footpegs not included).................$458.39 17546 Replaces OEMs 33891-98, 33892-98 Forward Control Kits for Evolution Sportster Models Available in two different versions to fit all models from 1986 to present. Each kit includes all the necessary brackets, pedals, linkage, O-ring pegs, hardware and detailed instruction sheet to convert both brake and shifter to forward-mount style. 17551 Fits all Evolution Sportster models with 4-speed transmissions from 1986 thru 1990........................................$323.99 17545 Fits all Evolution Sportster models with 5-speed transmissions from 1991 thru 2003........................................$353.99 Note: CC #17545 will not fit with Original Equipment highway bars. 17549 Replacement brake pedal for CC #17551.....................$45.49 17530 Replacement shift lever for CC #17551.......................$11.09 Brake Side Mid Foot Control Kit for V-Rod Models by Kosman Specialties Designed to provide a different riding position A preferred position for comfort an sport riding A complete bolt-on kit supplied with all necessary hardware and easy to follow instructions Will only fit with aftermarket exhaust such as Vance & Hines, or Screamin Eagle exhausts will not fit with stock exhaust system The parts are machined out of aircraft grade aluminum alloy with a silver powder-coat finish 644039 Fits all V-Rod models from 2002 to present................$445.00 Shift Side LSL Rear Set for Sportster Models This kit is a must for any high performance Sportster model. CNC-machined ergonomic rear sets provide the proper riding position. They work well with stock handlebars and feature folding footpegs and a special bracket for the shift side because there are no existing mounting holes on the stock frame. Silver anodized for strength and wear protection. 86013 Fits all Sportster models from 1986 thru 2003..........$985.00 3.14 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Economy Forward Control Kits Apparel Bike Kits & Trailers Seats & Bags Extended Forward for Early Sportster Models Stretch out with these extended chromed controls for Sportster models. Unlike other kits, the original master cylinder is retained in the factory position, eliminating the need to re-bleed or re-plumb messy brake lines. Heavy-duty mounting plates are over 5/16" thick with a 1 diameter footpeg support. Heim joints at control linkage ends provide smooth operation with minimal maintenance. Complete with chrome ribbed pegs and rubber shift and brake pads....................................$294.99 060148 Fits Sportster models from 1980 thru 1981 Santee Forward for Sportster Models Two complete and easy-to-install kits for moving the stock controls to a more comfortable position near the front frame downtubes. All major components are flawlessly chrome-plated including the ribbed pegs. Oversized rubber-covered brake and shifter toe pegs and mounting hardware are included. 08946 Fits Sportster models from 1957 thru 1974..................$489.99 08947 Fits Sportster models from 1977 thru 1978..................$459.99 Foot Hand Lighting Electrical Exhaust 060025 Intake Engine Gaskets Tranny & Clutch 130426 130425 Forward Control Sets for Sportster Models Available for mechanical or disc brake models these forward control units provide a more comfortable riding position. Includes rubber footpegs with chrome end caps. Complete Kits Sets include both shift and brake controls. 060170 Fits Sportster models from 1975 thru 1976..................$177.99 060172 Fits Sportster models from 1977 thru 1978*.................$177.99 060173 Fits Sportster models from 1979 thru 1981*.................$177.99 Brake ONLY Available for mechanical or hydraulic disc brakes. Kits for hydraulic disc are designed to work with Wagner or Kelsey-Hayes style 1-piece master cylinders. 130425 Fits Sportster models from 1975 thru 1978. Mechanical cable operated linkage. Right side brake...........................$76.99 130426 Fits Sportster models from 1979 thru 1981. Hydraulic disc brake. Right side brake......................................$76.99 Note: Kit requires extended brake line (not included) 139007 Brake cable replacement for CC #130425.....................$28.99 Shift ONLY 060025 Fits Sportster models from 1975 thru 1976. Left side shift.....$73.99 *Note: Kit requires modification to stock shift arm. Most installations will require longer motor mount bolts. Use CC #36134 (sold separately) Budget Forward Control Sets Forward controls sold in complete sets or individually by side. Complete Sets 78331 For FL models from 1958 thru 1985 and 1971 thru 1973 FX models (hydraulic rear brake only requires longer hose)...$147.99 78332 For FX models from 1974-early 1983........................$147.99 Brake Side Only 78333 For FL/FX models from 1936 thru 1978 (hydraulic rear brake only requires longer brake hose)................$83.99 78334 For Sportster models from 1957 thru 1974 (left-side cable-operated brake).............................$94.59 78336 For Sportster models from 1979 thru 1985 (requires longer brake hose)................................$94.59 Shift Side Only 78337 Fits 1971 thru 1973, FXWG models 1980-early 1985*.........$83.99 78338 For Sportster models from 1954 thru 1974 (right-side shift)..$94.16 78340 For Sportster models from 1977 thru 1985 (left-side shift)...$91.99 * Requires relocation of horn on some models. Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.15 Cross Reference
Adjustable Mini Floorboard Kits 3 09888 Footpegs & Foot 09911 09888 09911 Adjustable Passenger s Mini-Floorboard Kits for Softail Models Designed to bolt to the passenger footpeg mounting points and available in two different versions. One has mini Shaker floorboards with vibration-absorbing dampers. Both kits have 7/8" of fore-to-aft movement and may be rotated in a 360 arc. Kits include everything necessary to make the conversion, and fit all FX Softail models and FLST models from 1984 thru 1999, and FLSTC models from late 1987 thru 1989 (1990-1999 FLSTC models must use CC #09904). Floorboards measure approx. 71/4" x 31/2". 09888 Kit with Shaker mini-floorboards.............$221.99 09911 Kit with mini-floorboards.......................$214.99 09904 Kit with Shaker mini-floorboards for FLSTC models from 1990 thru 1999..........$221.99 Universal Adjustable Mini-Floorboard Kits for Highway Bars Designed to clamp-on to highway bars and features vibration-absorbing dampers in the floorboards. In addition to having 7/8" of fore-to-aft movement, they may also be rotated in a 360 arc. Includes everything necessary for installation and features flawless chrome-plating on the individual components. Floorboards measure approximately 71/4" x 31/2". 09899 Fits 1"-diameter highway bars............................$141.99 09900 Fits 11/4"-diameter highway bars (shown).................$167.22 Note: These floorboard kits should not be used under normal stop-and-go operating conditions 3.16 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Adjustable Mini Floorboard Kits Apparel Bike Kits & Trailers Seats & Bags Foot Adjustable Driver s Mini-Floorboard Kit Fit into the stock female footpeg clevis on models with forward controls. In addition to 7/8" of fore-to-aft movement, they may be rotated in a 360 arc. Kit includes everything necessary for installation and features flawless chrome-plating on the individual components......................$186.89 09910 Fits Dyna Wide Glide, FXST, FXSTC, FXSTS, FXSTSB, and 4-speed FXWG models from 1983 to present Hand Lighting Electrical Exhaust Intake Engine Adjustable Passenger s Mini-Floorboard Kit for FXR Models Bolts to the passenger footpeg mounting point on FXR models. Shaker floorboards have vibration-absorbing dampers, 7/8" of fore-to-aft movement, and rotate in a 360 arc. Kit includes everything necessary for installation and features chrome-plated components. Floorboards measure approx. 71/4" x 31/2"........$221.99 09904 Fits all FXR models from 1982 thru 2000 Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Adjustable Passenger s Mini-Floorboard Kit for Dresser Models Bolts to the passenger floorboard mounting point on all late model Dressers. Mini-floorboards have vibration-absorbing dampers with 7/8" of fore-to-aft movement, and can be rotated in a 360 arc. Kit includes everything necessary to make the conversion and features flawless chrome-plating on the individual components. Floorboards measure approx. 71/4" x 31/2"...$221.99 09880 Fits all FLT, FLHT and FLHS models from 1987 thru 1992 3.17 Sheetmetal General Cross Reference
Floorboards 3 46117 Footpegs & Foot Tour Ease Mini Floorboards May be installed in any clevis-style footpeg mounts, including as passenger floorboards for Softail models, or to replace the stock rider pegs on FXR or Softail models. Additional holes permit them to be rotated 15 for increased comfort. 05103 Sold in pairs (measure 8"-long x 4"-wide)...................$41.19 Note: When used in place of highway pegs, these floorboards should not be used under normal stop and go conditions. 05100 Replacement bolt and spacer set (sold in pairs)................$8.54 05101 Replacement mounting blocks (sold in pairs).................$17.24 Rear Passenger Floorboards Chrome floorboards provide additional comfort. They bolt-on in minutes, but will not work on models with kickstart only due to interference with the kickarm. Sold in pairs............................................$54.49 05106 Fit 4-speed Big Twins from 1958 thru 1986 (except Softail models) 46121 Tour Ease Passenger Floorboards These passenger boards provide excellent comfort, and have a unique universal mounting system that promotes easy installation. Made from 12-gauge steel with rubber pads, and triple chrome-plated. 05104 Set of two floorboards......................................$64.49 05105 Replacement floorboard pads (sold in pairs)..................$11.29 Adjustable Passenger Floorboard and Footpeg Mounting Kits Chrome steel floorboard kit allows you to update your Touring or FXR model with passenger floorboards that can be adjusted over a range of 11/2". Includes left and right-side swingarm pivot brackets and all necessary hardware for installation. Installation may require the additional purchase of passenger floorboards and mounting brackets. Chrome steel footpeg kit permits you to bolt footpegs to the swingarm pivot bracket on Touring and FXR models where floorboard mounting brackets have traditionally been installed. Permits the footpegs to be rotated in a 360º arc providing a wide range of adjustment. Includes chrome-plated pivot brackets, extensions, adjustable bracket and arm, clevis and all necessary hardware for installation. Fit all Touring and FXR models from 1980 to present. 46117 Adjustable passenger floorboard kit.......................$172.59 46121 Adjustable footpeg kit....................................$261.99 Note: Passenger footpegs are not included in the kit. 3.18 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Floorboards Apparel Bike Kits & Trailers Seats & Bags 05147 Foot 05102 05149 Ness-Tech Full-Length Floorboard Kits Eliminate the need for forward controls or highway pegs. Made from 3/8"-thick billet aluminum plate, machined for cushioned rubber inserts and chrome-plated. They measure approximately 19"-long x 4"-wide and include all necessary mounting brackets and hardware. Sold in sets. 05642 Fits FL Softail models from 1986 to present...........$449.95 05085 Replacement rubber inserts (set of 16)................$24.95 14319 Hand Lighting Electrical Exhaust 05148 Cyclesmiths Banana Boards Floorboards are curved in front and back for a great look, with a high-grip riveted footpad. Available in 14" and 19" lengths, passenger floorboards and brake pedal cover. Floorboards fit the late spacing used on all 5-speed models with floorboards from 1980 to present. Passenger boards fit all models from 1994 to present originally equipped with rear floorboards, while the brake cover fits FL Softail models from 1986 to present and Touring models from 1983 to present. Sold in pairs. 05147 Driver floorboards (14"-long)...$224.95 05148 Driver floorboards (19"-long)...$249.95 05149 Passenger floorboards..........$169.95 05102 Brake pedal cover (sold each)....$79.95 Ness-Tech Mini Floorboards An exciting alternative to full-sized floorboards for a leaner, custom look. Made from chromeplated billet aluminum. Measures 8"-long x 31/2"-wide x 3/8"-thick. Includes all necessary mounting hardware. Sold in sets. 05643 Male mount (shown)...........$199.95 05225 Replacement rubber inserts (set of 8)........................$14.89 Adjustable Floorboard Kits Kits permit a full seven inches of fore-aft adjustment along with angle and height adjustability utilizing forged and chrome-plated mounting brackets. Available with modified versions of our popular oval floorboards or oval shaker floorboards. Fit all 4-speed FXWG models from 1980 thru 1986, and all Softail or Dyna Wide Glide models from 1984 to present (except FL Softail models). May also be installed on any motorcycle with clevis-style footpeg mounts. For example, they will fit on the rear of Softail models as a set of passenger floorboards. Includes hardware and instructions. 26568 Kit with oval shaker floorboards......$143.49 26569 Kit with oval floorboards (shown).....$132.99 14324 190591 190590 Tour Ease Custom Floorboards Custom assemblies include custom pad with cover, vibration dampers and heavy-gauge chrome steel bases. Available in oval or rectangular styles. Early Floorboards Fits 4-speed FL models from 1966 thru 1984. 190590 Oval (sold in pairs)...............$94.44 190591 Rectangular (sold in pairs)......$104.99 Late Floorboards Fits 5-speed Touring models and FL Softail models from 1980 to present. 14324 Rectangular (sold in pairs)......$117.59 Custom Floorboard Pads Feature non-slip rubber pads, chrome slotted covers and high density vibration dampers. Ready for mounting on stock floorboard bases. 14319 Rectangular (sold in pairs).......$64.49 3.19 Intake Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General Cross Reference
Floorboards & Brackets Early Model Late Model 26567 3 26487 26564 12997 12999 Footpegs & Foot Original Equipment-Style Floorboards Available in three different versions that fit the stock mounting brackets on all 4-speed models from 1940 thru 1984. The oval shaker floorboards provide Original Equipment styling, with floating upper plates just like the late model floorboards. Replacement bracket kits are available separately. Floorboard Sets 26487 Standard oval floorboards (repl. OEM 50603-40).........................................$53.79 26564 Rectangular shaker floorboards (repl. OEM 50603-74TA)................................$67.99 26567 Oval shaker floorboards...............................................................$80.99 Note: Installation of oval shaker floorboards on foot clutch models reduces the amount of travel available for the foot clutch rocker pedal. Modifications may be required on these models. Replacement Parts 26565 Black rectangular pads (repl. OEM 50614-66T) sold in pairs...............................$10.99 26488 Black oval pads (sold in pairs)............................................................$12.49 26566 Replacement bumpers (repl. OEM 50620-74) set of 8.....................................$10.99 26559 Rectangular floorboard upper plate with pad (sold each).................................$16.99 Late Model Floorboards These alternatives to the stock floorboards fit all 5-speed Touring and FL Softail models from 1980 to present. The oval shaker set has the mounting brackets offset from the center of the floorboards. Depending on which way they re installed, you ll end up with your feet approximately 1" further ahead of, or further behind, the stock position. This permits you to tailor your foot placement for increased comfort. The rectangular shaker floorboards are replacement items for crash-damaged or used motorcycles. Compatible with Original Equipment or CC replacement parts. Floorboard Sets 12997 Rectangular shaker floorboards (repl. OEM 50621-79A).................................$69.79 12999 Standard oval floorboards...............................................................$54.49 Floorboard Spacer Models equipped with floorboards require this aluminum spacer to provide the correct floorboard and shift lever clearance. 95157 Complete kit............................................................................$22.49 Replacement Parts 26565 Rectangular pads (repl. OEM 50614-66T) sold in pairs....................................$10.99 26488 Replacement pads for oval floorboards (sold in pairs)....................................$12.49 26566 Replacement bumpers (repl. OEM 50620-74) set of 8.....................................$10.99 26559 Rectangular floorboard upper plate with pad (sold each).................................$16.99 Solid Floorboards for FL Models Chrome plated floorboards with solid mount pads fit FL models 1970-1984. Can also be used on early steel primaries when bracket kit 26561 is used. Sold in pairs. 190509 Floorboard set.................$52.99 26565 Rectangular pads (repl. OEM 50614-66T)..........$10.99 190504 26488 26566 3.20 26560 26561 OEM-Style Bracket Kits for Floorboards Replacement brackets and mounting tabs for installing floorboards. 26560 Bracket kit for aluminum primary.......................................................$40.99 26561 Bracket kit for tin primary.............................................................$40.99 Prices appearing in this catalog are Suggested Retail Price and are subject to change* Vintage-Style Floorboards for Touring and Softail Models Chrome plated vintage style floorboards feature raised footpad and anti-vibration dampeners for a comfortable ride. Fits 5-speed Touring models from 1980 to present, and Fat Boy and Heritage Softail models from 1986 to present. Replacement rubber pads and vibration dampener kits are also available separately. 190504 Floorboard set (repl. OEM 50599-89T)...........$67.49 26488 Black replacement pads for oval floorboards (sold in pairs)........$12.49 26566 Replacement bumpers (repl. OEM 50620-74) set of 8....$10.99
90058 90057 Floorboard Brackets & Covers Apparel 90059 Front Floorboard Brackets for Touring Models Great for replacing Original Equipment black brackets. Made from investment cast steel and beautifully chromed. Fit the driver s floorboards on all 5-speed Touring models from 1983 to present. 90058 Rear, left-side (repl. OEM 50622-83B)..$56.14 90059 Rear, right-side (repl. OEM 50518-83B)..$45.19 90057 Front, (sold in pairs) repl. OEM 47365-83B....$72.29 46060 Bike Kits & Trailers Seats & Bags Foot Hand 46064 Lighting 98380 Electrical discontinued Exhaust 98296 Intake Chrome Swingarm Blocks for Touring Models by Accutonix CNC-machined from 6061-T6 billet aluminum. Replaces the stock swingarm mounting blocks. Also has mounts for Original Equipment rear floorboards........................$223.64 38677 Fits all Touring models from 1993 to present Floorboard Adapter Bracket Special bracket used when installing muffler pipes on 1970 thru 1984 4-speed FL models, to keep floorboards clear of pipes........$15.49 280010 Sold each Chrome Passenger Floorboard Support Brackets Chrome-plated die-cast steel passenger floorboard supports. Sold in pairs. 98380 Fits all 1987 Touring models (repl. OEM 52713-87). Can also be used on these models from 1988 thru 1992 to lower the floorboards 11/2"......$123.29 98296 Fits Touring models from 1987 thru 1992 (repl. OEM 52713-91). Can also be used to raise the floorboards 11/2" on 1987 Touring models..........$123.29 90061 90060 Floorboard Brackets for Softail Models Chrome replacement floorboard brackets to fit all FL Softail models from 1987 thru 1999. 90060 Right-side bracket (repl. OEM 42431-87A) sold each.......................$169.99 90061 Left-side bracket (repl. OEM 50990-86B) sold each........................$16.99 46065 Doss Floorboard and Shifter Bracket Cover Kit This 4-piece kit of ribbed chrome steel covers adds a clean finished look to Softail models equipped with floorboards. Includes covers for the right-side floorboard bracket and support, and for the master cylinder, and a matching cover for the shifter bracket. The kit s components are also available separately below. 46060 Fits FL Softail models from 1989 thru 1999........................$155.99 Floorboard Bracket Cover Set Two-piece set enhances the look of the right floorboard/master cylinder mounting bracket. 46064 Fits FL Softail models from late 1987 thru 1999.........................$52.39 Shifter/Kickstand Bracket Cover Covers the Original Equipment bracket to minimize the unfinished look of the stock parts. 46065 Fits FL Softail models from 1989 thru 1999 (will not work with Original Equipment highway bars).........$79.99 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.21 Cross Reference
Floorboard Covers 65123 3 65178 Footpegs & Foot Doss Floorboard Undercovers Covers are made from heavy-gauge stamped steel with flawless chrome-plating. Instructions and all necessary mounting hardware are included. Sold in pairs....................$49.99 46610 Fit the Original Equipment driver s floorboards on all 5-speed Touring and FL Softail models from 1980 to present Ness-Tech Floorboard Skins Update your floorboards with these chromeplated billet aluminum floorboard skins. They replace the top plate and rubber pad of your Original Equipment or rectangular floorboards and bolt solidly to the bottom plate on all models made since 1966. Easily adapted to the older floorboards on models dating back to 1940. 05646 Floorboard skins (sold in sets)...$249.95 05227 Replacement rubber inserts (set of 8)........................$18.95 Pro-One Floorboard Covers and Brake Pedal Cover Great-looking chrome-plated billet items complement the graceful lines of your bike. All have ball milled details on their upper surfaces. Front Floorboards Install over the stock floorboards........$230.95 65178 Fits FL Softail and 5-speed Touring models from 1980 to present Brake Pedal Cover Two-piece design has a lower plate that encloses the stock brake pedal lever and holds the ball milled top pad...........................$67.95 65123 Fits FL Softail models from 1987 to present, and 5-speed Touring models from 1983 to present Chrome Undercovers for Passenger Floorboards Look good even when passenger floorboards are folded up. Simple installation limited to drilling mounting holes in the floorboard bases. Sold in pairs.............................$37.99 05150 Fit all Touring models from 1987 to present Chrome Undercovers for Passenger Floorboards A great accessory to stylize passenger floorboards. The concho and leather accent look great when the floorboards are folded up. Easy-to-install, includes hardware........$59.99 09905 Fit all FLT, FLHT, FLHS and Road King models from 1987 to present Doss Floorboard Pads Designed to replace the top plate and rubber pad of your Original Equipment or CC rectangular floorboards, and still utilize the stock rubber bumpers. Rubber inserts are sandwiched between stamped steel plates which feature flawless chrome-plating, and the ribs protrude thru slots cut into the top plate. Pads may be installed on the stock bottom plates of all models made since 1966 or if the rubber bumper mounts are not desired, bolted to the bottom plates by drilling two small holes at the front and rear of each one. Includes 8 new rubber bumpers. 46600 Complete kit....................$76.29 46061 Replacement ribbed insert (pair).$13.99 46372 Doss Lighted Passenger Floorboard Covers For added lighting and increased visibility. Fits Touring models from 1987 to present. Sold in pairs. 46373 Lighted floorboard marker lights only for Touring models already equipped with CC #46372 or OEM 50782-91..$44.99 46372 Bottom cover only (sold in pairs).....................$51.39 09134 Replacement bulbs (pack of 10)......................$12.89 3.22 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Footpegs Apparel Death Series Smooth Shifter Pegs The original Death Series CNC-machined from billet aluminum with show chrome quality Enhances your custom bike like no other Includes 5/16" mounting bolt required to install on forward controls 644016 3"-long (sold each)....................$39.95 644017 4"-long (sold each)....................$49.95 Twist Speared Crossed Smooth Bike Kits & Trailers Seats & Bags Foot 111224 Ball Milled Hand 111225 Death Series Forward Control Footpegs by Thunder Cycle Design The original 'Death' Series Enhances your custom bike like no others CNC machined from billet aluminum with show chrome quality Measures 81/2" in length with ball detent 3/8" mounting bolt required to install Sold in pairs 644011 Twist pattern..............................................$159.00 644012 Crossed pattern............................................$159.00 644013 Speared pattern...........................................$159.00 644014 Ball milled pattern.........................................$159.00 644015 Smooth pattern............................................$159.00 Lighting Electrical Exhaust Intake Engine.44 Magnum Footpegs by Choppers Inc. Polished aluminum ends with.44 magnum shell casings fit into the lathe-turned bodies. Footpegs feature 1/4" drilled dimples in a staggered pattern. Available for rider or passenger. Sold in pairs. 111224 Rider pegs (71/2"-long, 3/8"-16 mounting)...................$256.99 111225 Passenger pegs (31/2"-long, 3/8"-16 mounting)..............$245.99 Twist Speared Ball Milled Gaskets Tranny & Clutch 190621 190620 Hex-Shaped Footpegs by Perse Hex design features hidden stainless steel hardware and a dual stainless steel ball detent that positively locates the pegs in position. Machined from 6061-T6 grade aluminum, they are available in chrome, or a gloss black anodized finish. Stainless steel mounting hardware included. Sold in pairs. 190620 Chrome footpegs..........................................$149.95 190621 Black footpegs.............................................$152.99 Smooth Crossed Death Series Passenger Footpegs by Thunder Cycle Design The original 'Death' Series Enhances your custom bike like no others CNC machined from billet aluminum with show chrome quality Measures 61/2" in length with ball detent 3/8" mounting bolt required to install Sold in pairs 644001 Twist pattern..............................................$159.00 644002 Crossed pattern...........................................$159.00 644003 Speared pattern...........................................$159.00 644004 Ball milled pattern........................................$159.00 644005 Smooth pattern...........................................$159.00 Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.23 Cross Reference
Footpegs 47655 12934 19953 12933 19955 3 O-Rings Footpegs & Foot 47701 47656 47702 47658 12928 18827 Custom Chrome O-Ring Pegs Kick Pedal and Shifter Pegs (sold each) 19953 Kick pedal (flat).................$25.99 19955 Shift peg (short stud).............$9.49 Custom Pegs (sold in pairs) 12928 3/8"-24 stud mount..............$22.99 18827 1/2"-20 stud mount..............$23.69 19638 Clamp-on.......................$24.49 190034 Fits 5/8" square bars used in most after market highway bars.......$18.49 Note: When used as highway pegs, these footpegs should not be used under normal stop-and-go operating conditions. Passenger Pegs (sold in pairs) Fit most models from 1971 to present. 12933 Standard length pegs (repl. OEM 50901-84T)...........$22.99 12945 Extended length pegs (1"-longer than stock)...........$30.14 12931 19638 Driver Pegs (sold in pairs) Fit Sportster models from 1954 thru 1990 and FX models from 1971 thru 1985 12931 Replaces OEM 52651-85T........$25.99 Fit FXR models (except FXRD and FXRP) from 1982 thru 1994 and Sportster and Dyna Glide models from 1991 to present (except Dyna Wide Glide models) 12934 Replaces OEM 50913-89T........$40.99 Replacement O-Ring Sets Contains enough O-rings for one footpeg. 19956 Fits CC #19953 flat kick pedal, and #12931 or #12934 driver pegs.....$4.19 19957 For CC #19955 shift peg...........$6.69 19958 For CC #12933 pegs or stud mount and clamp-on custom pegs........$3.49 19955 47659 12974 Discontinued Custom Foot and Shifter Pegs by Paul Yaffe Originals Chrome-plated, CNC-machined footpegs and shifter toe pegs designed by master customizer Paul Yaffe. Available in three different male mount styles including the Billet and Rubber which features a non-slip rubber grip surface. Matching grips are available for some styles. Footpegs (sold in pairs) 47655 Billet and Rubber...............$116.99 47656 Billet Diamond.................$116.99 47701 Billet Smooth...................$116.99 Shifter Toe Pegs (sold each) 47658 Billet and Rubber................$36.99 47659 Billet Diamond..................$36.99 47702 Billet Smooth....................$36.99 Handlebar Grips (sold in sets) 47700 Billet Smooth (not shown)......$127.99 Billet Shift Peg Spacer by Paul Yaffe Originals Provides extended reach for easier shifting and braking. Made from chrome plated aluminum. Fits all Yaffe and Original Equipment shifter toe pegs.............$25.99 47693 Sold each 12346 12345 Shifter Toe Pegs Wide selection of toe pegs in the market from stock to custom. Sold each. 12974 Black rubber toe peg with chrome end cap and short stud................................$8.39 12345 Stock replacement black rubber toe peg with short stud (repl. OEM 34611-65T).........$4.49 12346 Stock replacement black rubber toe peg with long stud (repl. OEM 34609-52T).........$4.49 19955 Round O-ring toe peg (repl. OEM 34631-84T)..$9.49 Replacement O-Rings 19957 Fits CC #19955 (repl. OEM 49030-84T)..........$6.69 3.24 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Footpegs Apparel 27167 27433 27436 Bike Kits & Trailers 27157 27430 Seats & Bags 27175 27177 Foot 27432 27435 Hand 27431 27434 Lighting Mirage Footpegs By combining our chrome and ribbed footpegs with the Mirage design we ve added a new styling accent to complete the integrated look achieved with Mirage accessories like derby and point covers, air cleaner insert, master cylinder cover, gas caps and many other items. Sold in pairs. 27157 Large, male mount..............$54.49 27167 Large, 5/8" female mount........$54.49 27169 Large, female mount............$49.99 27175 Small, male mount...............$46.99 27176 Small, female mount.............$49.99 27177 Small, 5/8" female mount........$45.84 Custom Chrome Knob End Pegs Innovative exclusive design integrates a chrome-plated die-cast body with rubber inserts for a more comfy ride and hot looks. Sold in pairs. 27431 Large, male mount..............$52.89 27432 Large, female mount............$49.54 27433 Large, 5/8" female mount........$49.54 27434 Small, male mount...............$49.89 27435 Small female mount.............$48.49 27436 Small, 5/8" female mount........$47.94 Knob End Shifter Toe Peg 27430 Sold each........................$12.89 Electrical Exhaust Intake Engine Gaskets Tranny & Clutch Knurled Passenger Footpegs by Accutronix Great looking foot pegs made in the U.S.A. from billet aluminum and then flawlessly chromeplated. Features unique Knurled design. Sold in pairs. 656692 Knurled rear footpegs.........$128.60 Optional Matching Hand Grips 656690 Knurled hand grips (sold in pairs)...................$119.55 'Tribal' Footpegs by Accutronix Unique design to compliment your custom bike. Machined from billet aluminum with show chrome quality finish. Matching hand grips and forward controls available. Measures 6" in length. Sold in pairs.....................$162.88 644041 Fits all models with female-style clevis Driveline Wheels, Tires & Brakes Frames Landmark Diamond II Footpegs These chrome-plated billet aluminum, Landmark pegs provide great value and outstanding custom looks. 16541 Male mount footpegs (pair)......$90.99 16542 Shifter toe peg (sold each).......$28.99 Ali-Baba Footpegs by Paul Yaffe Footpegs and shifter toe peg feature the same quality and attraction as our existing Ali-Baba line of parts. Machined from 6061-T6 billet aluminum and chrome-plated. 600048 Footpegs (sold in pairs).........$109.99 600049 Shifter toe peg (sold each).......$41.99 Forks & Shocks Sheetmetal General 3.25 Cross Reference
Footpegs 12173 12172 18967 46137 46015 46130 46136 46134 18968 46135 12174 3 46129 46013 46014 46125 18966 Footpegs & Foot 46011 46010 Chrome and Ribbed Rubber Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. The perfect match to our CC #12900 Handlebar Grips. 46010 Large, female mount (sold in pairs)........................$41.74 46011 Large, male mount (sold in pairs)..........................$40.24 46013 Small, male mount (sold in pairs)..........................$42.49 46014 Small, 5/8" female mount (sold in pairs)....................$42.49 46015 Shifter toe peg (sold each)................................$13.29 46016 Kicker pedal (sold each) not shown........................$27.19 Replacement Parts 12172 Mount, large female (sold in pairs)........................$24.99 12173 Mount, 5/8" female (sold in pairs).........................$24.49 12174 Mount, male (sold in pairs)................................$19.99 25193 Replacement countersunk bolt (pack of 10)................$16.14 18967 18966 46112 12173 46126 46127 46128 Live to Ride Footpegs Chrome-plated, steel footpegs feature replaceable anti-vibration rubber isolation pads with Live to Ride motto. 46125 Small, male mount (sold in pairs)..........................$39.99 46126 Small, 5/8" female mount (sold in pairs)....................$41.99 46127 Large, male mount (sold in pairs)..........................$45.99 46128 Large, female mount (sold in pairs)........................$45.99 46130 Kicker pedal (sold each)...................................$27.69 Replacement Parts 18966 Mount, large female (sold in pairs).........................$18.49 18967 Mount, 5/8" female (sold in pairs).........................$18.49 18968 Mount, male (sold in pairs)................................$17.14 46134 Rubbers (small pegs) sold in pairs..........................$10.99 46135 Rubbers (large pegs) sold in pairs..........................$11.99 46136 Rubber (shifter toe peg) sold each..........................$2.99 46137 Rubber (kicker pedal) sold each.............................$8.34 12172 18968 46106 46110 46111 Discontinued 12174 46107 46104 46105 Chrome and Rubber Band Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. Perfectly match our CC # s 12165 and 12166 Handlebar Grips. 46107 Large, female mount (sold in pairs)........................$59.99 46110 Small, male mount (sold in pairs)..........................$52.29 46111 Small, 5/8" female mount (sold in pairs)....................$59.99 46112 Shifter toe peg (sold each)................................$16.29 Replacement Parts 18966 Mount, large female (sold in pairs)........................$18.49 18967 Mount, 5/8" female (sold in pairs).........................$18.49 18968 Mount, male (sold in pairs)................................$17.14 46114 Rubbers (large footpeg) set of 8............................$8.14 46116 Rubbers (shifter toe peg) set of 2...........................$4.69 46102 46101 Chrome Spur Pegs Mount to the Original Equipment or aftermarket footpeg clevis on most models. Perfectly match our CC #12169 Handlebar Grips. 46101 Large, female mount (sold in pairs)........................$46.89 46102 Large, male mount (sold in pairs)..........................$48.24 46104 Small, male mount (sold in pairs)..........................$39.99 46105 Small, 5/8" female mount (sold in pairs)....................$49.99 46106 Shifter toe peg (sold each)................................$15.49 Replacement Parts 12172 Mount, large female (sold in pairs)........................$24.99 12173 Mount, 5/8" female (sold in pairs).........................$24.49 12174 Mount, male (sold in pairs)................................$19.99 25193 Replacement countersunk bolt (pack of 10)................$16.14 3.26 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
46021 Footpegs 46022 Apparel Bike Kits & Trailers Seats & Bags Accutronix Billet Footpegs Great looking pegs made in the USA from billet aluminum and then flawlessly chrome-plated. They re swaddled in vibration-absorbing rubber to provide a high level of comfort.......$128.99 44498 Male mount (sold in pairs) Extended O-Ring Footpegs 1"-longer than regular O-ring pegs for more comfort when riding two-up. They match our entire line of O-ring pegs and have replaceable rubber O-rings. Sold in pairs. 12945 Fit most models from 1971 to present.......................$30.14 19958 Replacement O-rings (pack of 12).$3.49 46020 Oval Ribbed Footpegs Large oval-shaped footpegs provide a more comfortable footrest, and add a nice visual accent. Sold in pairs. 46020 Male mount...................$53.99 46022 Female mount.................$51.99 46021 5/8" female mount.............$51.99 Foot Hand Lighting Electrical Custom Chrome Mini-Rib Footpeg and Grip Sets Mirage or Inferno, Rick Doss Speed Line or Eclipse - pick your pegs and grips to match other accessories and get just the look you want. Distinctive mini-rib designs look great with one-piece designer caps integral with the slotted frame that holds shock-absorbing ribbed rubber inserts. Sold in pairs (except shifter peg). Exhaust Intake Engine Male Large Peg Male Small Peg Female Large Peg Female Small Peg 5/8" Female Large Peg 5/8" Female Small Peg Shifter Peg Grip Set Gaskets 27380 $51.39 27175 $46.99 27385 $49.99 27387 $44.99 27384 $49.99 27386 $44.99 27382 $14.39 27383 $32.89 Tranny & Clutch Mirage Driveline Inferno n/a n/a n/a 27627 $45.49 n/a 27628 $45.49 n/a 27655 $34.89 Wheels, Tires & Brakes Frames Rick Doss Eclipse n/a n/a 46255 $49.99 46257 $45.49 46254 $49.99 46256 $45.49 n/a n/a Forks & Shocks n/a 46501 $45.49 46505 $49.99 46507 $45.49 46504 $49.99 46506 $45.49 46502 $13.99 46503 $31.39 Sheetmetal Rick Doss Speed Line General 3.27 Cross Reference
3 Footpegs & Foot Footpegs 18960 18974 18970 18967 18961 18969 Retro Footpegs by KüryAkyn Features the same vibration-absorbing material that is used in the classic Iso-Pegs but with a sleeker tread, and a new, trimmer profile for the body of the footpeg. 48247 Male mount (sold in pairs).......$57.99 191031 Replacement retro footpeg pads (4 pieces)........................$16.99 18968 18964 18962 18963 12990 18966 18971 65174 Vibra-Kushion Footpegs These state-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and superior comfort. Other features of these pegs include replaceable hollow-core wear-resistant rubber insert cleats and interchangeable steel mounting clevis. Fit most early and late-model bikes. Vibra-Kushion Footpegs (sold in pairs) 18960 Small, male mount.................$39.24 18961 Small, 5/8" female mount...........$36.49 18962 Large, male mount.................$44.29 18963 Large, female mount...............$39.49 190130 Clamp on pegs. Fits 1" and 11/4" frame or engine guard tubing.............$48.49 190042 Stud mount 1/2"- 20................$40.99 Shifter Pegs and Kicker Pedal (sold each) 18964 Standard length toe peg............$15.64 18974 Extended toe peg (31/2"-long).......$18.49 18965 Kicker pedal........................$35.99 Replacement Parts 18966 Mount, large female (sold in pairs)..$18.49 18967 Mount, 5/8" female (sold in pairs)...$18.49 18968 Mount, male (sold in pairs).........$17.14 18969 Rubbers (small footpeg) set of 8....$10.99 18970 Rubbers (large footpeg) set of 8....$13.19 18971 Rubbers (shifter toe peg) set of 3.....$5.99 18972 Rubbers (kicker pedal) set of 4.......$7.99 Note: None of these footpegs or replacement parts are interchangeable with their KüryAkyn Iso-Peg counterparts. 65130 12974 Dually Iso-Pegs by KüryAkyn With the same vibration-absorbing material used on standard Iso-Pegs, the chrome-plated footpegs have more isolation pads and twice the surface area for extra comfort.......$59.99 48227 Male mount (sold in pairs) Rubber Footpegs with Chrome Ends Die-cast footpegs with rubber sleeves and chrome ends. Fit a variety of applications including aftermarket highway peg sets. 12990 Passenger pegs (sold in pairs).......$27.54 12974 Shifter toe peg (sold each)..........$8.39 65127 Pro-One Chrome Footpegs Chrome-plated billet with ball milled detail in one-piece male mount or a unique adjustable design that allows the angle of the foot surface to be adjusted forward or back relative to the angle of the mount. For all models using male mount pegs 65127 One-piece pegs...............................$83.95 65130 Adjustable pegs.............................$115.95 65174 Shifter toe peg...............................$29.95 3.28 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Footpegs & Stirrups Apparel 48250 48251 48252 48007 48006 48004 48008 48253 48010 48011 48009 Iso-Pegs by KüryAkyn State-of-the-art chrome-plated footpegs have an innovative design which provides custom styling and great comfort. Other features include replaceable hollow-core wear-resistant rubber insert cleats and interchangeable mounting clevis. Iso-Pegs may be used on early or late-model bikes. Iso-Pegs 48250 Small, male mount (sold in pairs).....$38.29 48251 Small, 5/8" female (sold in pairs)......$38.29 48252 Large, male mount (sold in pairs).....$41.29 48253 Large, female mount (sold in pairs)...$41.29 48004 Shifter toe peg (sold each)...........$15.59 060020 Shift peg, longhorn. 7/8" longer than standard shift peg with 4 rubbers....$21.49 Replacement Parts 48006 Mount, large female (sold in pairs)....$9.84 48007 Mount, 5/8" female (sold in pairs).....$9.95 48008 Mount, male (sold in pairs)...........$10.89 48009 Rubbers (small footpeg) set of 8.......$9.99 48010 Rubbers (large footpeg) set of 8.......$9.95 48011 Rubbers (shifter toe peg) set of 3......$4.25 Note: None of the footpegs or replacement parts listed are interchangeable with their Vibra-Kushion counterparts. Bike Kits & Trailers Seats & Bags Foot Hand Lighting Electrical Exhaust 48030 Intake Engine 48029 Gaskets KüryAkyn ISO -Peg Extenders Extended comfortable ISO -Pegs are the way to get around extended carb/manifolds, hot pipes and open primaries. Extended pegs may reduce cornering ground clearance. Check clearance before and after installation. 190117 Sold in pairs................................................$39.95 Tranny & Clutch Driveline Wheels, Tires & Brakes 48028 Frames Vibra-Kushion Footpeg Stirrups Get more comfort without adding floorboards. These stirrups use our Vibra-Kushion footpegs, and are adjustable so that you get the right amount of heel support. Include male clevis that fit large or small-diameter Vibra-Kushion footpegs..................................$55.99 18973 Set of two Stash Tube Footpeg Chrome knurled footpeg with rubber belting. Threaded end cap unscrews to reveal a 5/8" x 25/8" stash area. See matching grips CC #111215. Sold in pairs. 190161 Male mount. Fits all FXR, FXWG, and Softail models.....$77.99 Iso-Stirrup Sets by KüryAkyn Chrome-plated stirrups with rubber heel supports adjust to any angle for the comfort and support of floorboards without the bulky look. They re available with large or small-diameter Iso-Pegs or without pegs for those with another preference, and mount to female clevis. Sold in pairs. 48029 Iso-Stirrups with large-diameter Iso-Pegs.....$89.95 48030 Iso-Stirrups with small-diameter Iso-Pegs.....$99.99 48028 Iso-Stirrups ONLY without footpegs...........$69.95 48034 Replacement heel rubbers.....................$8.44 Forks & Shocks Sheetmetal General 3.29 Cross Reference
Footpegs 05684 05020 3 05686 05022 Footpegs & Foot 05042 05046 Also Available in Black 05757 05759 05970 05809 05048 05052 05318 05319 05744 05745 Century Passenger Pegs by Billet Concepts Chrome-plated billet aluminum with grippy rubber inserts. Pegs click up and down on spring loaded ball bearings to ensure no flop or rattles. 47374 Sold in pairs....................$149.99 47339 648306 648308 648309 47340 Ness-Tech Footpegs Male mount footpegs made of chrome-plated billet aluminum. Sold in pairs. 05684 Twister.........................$89.95 05744 Twister (black painted).........$119.95 05020 Flamed.........................$89.95 05042 Grooved........................$89.95 05746 Grooved (black painted).......$119.95 05048 Knurled........................$89.95 05757 Diamond.......................$89.95 05318 Diamond Flatband..............$89.95 05970 Stepped........................$89.95 648306 Battistini Round Hole..........$119.95 648308 Battistini Oval Hole............$119.95 Replacement Parts 05054 Footpeg rubbers (pack of 8).....$13.99 3.30 648307 Ness-Tech Shifter Toe Pegs Made of chrome-plated billet aluminum. Sold each. 05686 Twister.........................$34.95 05745 Twister (black painted)..........$46.99 05022 Flamed.........................$32.85 05046 Grooved........................$34.95 05747 Grooved (black painted)........$46.99 05052 Knurled........................$29.95 05759 Diamond Twist..................$34.95 05319 Diamond Flatband..............$34.95 05809 Stepped........................$34.95 648307 Battistini Round Hole...........$44.95 648309 Battistini Oval Hole.............$44.95 Replacement Parts 05055 Toe peg rubbers (pack of 4)......$7.99 Prices appearing in this catalog are Suggested Retail Price and are subject to change* Chrome Passenger Peg Sets by Billet Concepts Include the mounting clevis for a custom look. They match the pegs used in our forward control kits (see pg 3.07). Fit all applications that use a threaded clevis to mount footpegs. Sold in pairs. 47339 Rubber belted style.............$149.99 47340 Ball milled style.................$149.99
Footpegs Apparel Bike Kits & Trailers 23193 Seats & Bags 23194 Foot 23197 23195 23196 Radial Series Footpegs and Brake Pedal Cover Kits designed by Radial Components, LLC Chrome die-cast footpeg kits are made to fit all models with female footpeg mounts from 1965 thru 2002. They re available in small and large sizes and feature adjustable male ends which permits them to be rotated to a position that provides maximum comfort. 23193 Large footpegs (sold in pairs).................................$62.99 23194 Small footpeg (sold in pairs)................................. $55.99 23195 Shifter toe peg (sold each)................................... $18.49 Brake Pedal Cover Kits Chrome die-cast brake pedal cover kits are available in small and large sizes. Small Cover Kit 23196 Fits FX Softail and Dyna Wide Glide models from 1984 thru 2002, and 4-speed FXWG models from 1983 thru 1986..............$31.99 Large Cover Kit 23197 Fits all 5-speed models with floorboards from 1980 thru 2002.........................................$40.99 Ness-Tech Torpedo Footpegs Footpegs are 1"-longer than factory units for increased comfort Shifter pegs are slightly longer than stock CNC-machined from billet aluminum Matching handlebar grips and fork legs are also available Chrome-plated 04944 Male footpeg (sold in pairs).................................$89.95 04945 Shifter peg (sold each)......................................$29.95 648330 Replacement footpeg rubbers................................$2.95 46262 46264 46260 Hand Lighting Electrical Exhaust Intake Engine Gaskets discontinued Tranny & Clutch 12987 12979 46263 Doss Eclipse 5-Rib Footpegs Our Eclipse pegs have a 5-rib design with fewer, but wider rubber ribs for a new custom look. They have the Eclipse crescent shape on the ends which match our grips and other Eclipse accessories. 46262 Large, female mount (sold in pairs).........................$49.99 46263 Small, male mount (sold in pairs)...........................$44.99 46264 Small, 5/8" female mount (sold in pairs)....................$49.99 Driveline Wheels, Tires & Brakes Frames Extended Pegs for Forward Longer than the stock pegs by over an inch for additional comfort when air cleaner, or tanks have made pegs difficult to use. Use as passenger pegs to help clear Shotguns or other custom exhaust equipment. Sold in pairs. 12979 Original Equipment-style..................................$26.64 12987 Chrome end cap style.....................................$36.59 12988 Black replacement rubbers.................................$7.99 Forks & Shocks Sheetmetal General 3.31 Cross Reference
Footpegs 07520 07521 07519 47839 3 07504 07513 Footpegs & Foot 47848 Supreme Legends USA Premium Chrome Billet Footpegs Target end-cap designed to match Legends forward control kits for a clean, integrated look, or they can be used alone. Sold in pairs. 47839 Three band rubber with male mounts........................$77.00 47848 Three band rubber with folding female mounts.............$106.00 47103 07506 07505 07516 07510 JayBrake Footpegs and Shifter Toe Pegs High-quality products made from 6061 T6 billet aluminum that permit you to match all of your bike s footpegs and shifter peg needs. Footpegs Sold in pairs. 07504 1.25"-diameter Wide Bands male mount footpegs..........$136.45 07505 1.25"-diameter Full Rubber male mount footpegs..........$136.45 07506 1.25"-diameter Dove Tail Strips male mount footpegs......$171.45 07510 Full Rubber folding footpegs (mount with 3/8-16" bolts)....$152.95 07513 Wide Bands folding footpegs (mount with 3/8-16" bolts)...$152.95 07516 Dove Tail Strips folding pegs (mount with 3/8-16" bolts)....$181.95 Shifter Toe Pegs Sold each. 07519 Full Rubber................................................$48.99 07520 Wide Bands................................................$48.99 07521 Dove Tail Strips.............................................$66.99 47105 190002 12244 47104 Supreme Legends USA Chrome Billet Footpegs Folding pegs for forward controls are also adaptable to mounting to any flat surface. Folding passenger pegs are available with straight or angled mount in standard male design. Sold in pairs. 47103 Folding driver footpegs....................................$106.00 47104 Angle mount passenger pegs...............................$77.00 47105 Straight mount passenger pegs.............................$77.00 Stock Replacement Large Diameter Footpegs Steel peg set with rubber covers. Fits FL models from 1941 thru 1984, FX models from 1971 thru 1985 (except FXST and FXWG models), and Sportster and K models from 1954 thru 1999. Sold in pairs. 190002 Footpeg set (replaces OEM 50939-52)........................$19.99 12244 Replacement rubbers (replaces OEM 50940-52T) sold in pairs...$4.19 3.32 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Footpegs & Footpeg Kits 09901 Apparel Bike Kits & Trailers Seats & Bags Retractable Passenger Footpegs by KüryAkyn Provides the passenger with an alternate footrest by moving the pegs up and forward. Folds back out of the way behind the passenger floorboards when not in use. Includes Iso-Peg footpegs. Sold in sets....................$159.99 48234 Fits all Touring models from 1993 thru 1998 190044 09903 09901 Adjustable Passenger s Footpeg Kit for FXR and Softail Models Designed to bolt to the passenger footpeg mounting point on all FXR models. Permits pegs to be rotated in a 360 arc. Kit includes everything for installation (except footpegs) and features chrome-plated components...........................................................$144.99 09901 Fits FX Softail and FLST models from 1984 thru 1999, and FLSTC models from late 1987 thru 1989 (1990 thru 1999 FLSTC should use CC #09903) 09903 Fits all FXR models from 1982 thru 1994 and FLSTC models from 1990 to present Note: Passenger footpegs are not included in the kit. 09903 Foot Hand Lighting Electrical Exhaust 26431 Intake 190042 Engine Gaskets 26366 26367 Passenger Pegs for FX Models Replacement peg sets with chrome ends (replaces OEM 50907-69A). 26431 Rubber peg set (sold in pairs)...$37.99 190042 Vibra kushion peg set..........$40.99 190044 Chrome O-ring peg set.........$36.49 Chrome Rear Footrest Bracket Sets Replacements for the rear brackets on 4-speed FX models thru 1981, or can be used to replace the 1982 and later one-piece welded and stamped rear footrest brackets, and the large aluminum rear brackets fitted to 4-speed FL models from 1977 thru 1984. 26366 Left and right brackets alone (1/4" steel plate)...............$18.49 26367 Bracket set (includes supports and mounting hardware).......$33.49 Adjustable Footpeg Kit for Models with Forward Fits into the female footpeg clevis on models with forward controls. Pegs may be rotated in a 360 arc. Kit includes everything necessary to make the conversion (except footpegs) and features flawless chrome-plating on the individual components................................$111.99 09890 Fits Dyna Wide Glide, FX Softail and 4-speed FXWG models from 1983 to present Note: Passenger footpegs are not included in the kit. Adjustable Passenger Footpeg Mounting Kit Chrome steel footpeg kit permits you to bolt footpegs to the swingarm pivot bracket on Touring and FXR models where floorboard mounting brackets have traditionally been installed. Permits the footpegs to be rotated in a 360º arc providing a wide range of adjustment. Includes chrome-plated left and right-side pivot brackets, extensions, adjustable bracket and arm, clevis and all necessary hardware for installation. Fits all Touring and FXR models from 1980 to present....................$261.99 46121 Complete kit Note: Passenger footpegs are not included in the kit. Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.33 Cross Reference
Footpeg Kits 18885 18881 3 Footpegs & Foot Highway Peg Kits Beautiful show-chrome fold-up footrests for comfortable cruising in style. Include all hardware necessary for easy installation. Note: These peg sets should not be used under normal stop-and-go operating conditions. For 4-speed Big Twin Models from 1958 thru 1985 (except 4-Speed FXWG and Softail Models) Note: Models without the factory-installed right-side frame mounting tab must install a CC #17503 Weld-On Frame Tab. 25299 O-ring style.........$48.49 26334 Wing style..........$40.99 For FXR Models from 1982 thru 1994 25298 O-ring style.........$51.49 26340 Wing style..........$43.99 190185 For Sportster Models Models from 1952 thru 1981 26052 O-ring style.........$48.49 26335 Wing style..........$40.99 Models with Generator from 1982-Early 1984 26331 O-ring style.........$49.99 26333 Wing style..........$42.49 Colony Acorn Highway Peg Mounting Kit Extended acorn studs simplify installation of highway pegs. 36134 Fits Sportster models from 1957-early 1984.....$14.99 18889 Clamp-On Footpeg Sets Clamp-on footpeg kits with three different styles of footpegs come complete with three-piece chrome frame clamps in 1", 11/8" or 11/4" diameters. The 1" kits will fit most aftermarket frames, and the 11/8" kits fit most 4-speed or Softail frames and 1957 thru 1981 Sportster models, as well as Original Equipment highway bars. The 11/4" kits will fit all Sportster frames from 1982 to present and all 5-speed frames. 1" 11/8" 11/4" 18881 18884 18887 with O-ring pegs.........................$52.99 18882 18885 18888 with Iso Pegs...........................$69.99 18883 18886 18889 with rubber pegs.........................$49.99 Chrome Highway Peg Brackets for Dyna Glide Models The perfect addition to Dyna Super Glide models or to replace stock mounts on all mid-shift Dyna Glide models from 1991 to present. Includes brackets, footpeg mounts and hardware............................$67.79 25256 Replaces OEM 49019-95 (sold in sets) Transmission Mount Passenger Peg Bracket for Big Twins Fits Big Twins with rigid frames. Use with any 3/8" stud-mount footpegs................$51.49 12686 Sold each 190186 Highway Bracket Kit with Lights These chrome highway bracket kits have 12-volt marker lights built into the peg extensions, making you more visible at night. All necessary mounting hardware is included.........$112.99 190185 Fits FXR models from 1982 thru 1994 190186 Fits Dyna Glide models from 1991 thru 1999 Weld-On Frame Tab Weld-on right hand side frame mounting tab for all late model 4-speed Big Twins without the Original Equipment mounting tab. For forward controls......................$6.54 17503 Sold each Footpeg Anti-Sag D-Clips Take the sag out of droopy male mount footpegs. Replace the Original Equipment D-clips with spring steel D-clips that have a integral shim to put pegs back to a flat and level position.......$2.05 per pr. 12704 Card of ten pairs 3.34 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Footpeg Kits Apparel Bike Kits & Trailers 12994 Seats & Bags Foot Chrome Midmount Footpeg Kits Provide the rider with an alternate place to rest his feet. These kits include a right-side mounting bracket, a new chrome inspection cover, footpeg clevis, mounting hardware and rubber footpegs with chrome ends. The midmount bracket and hardware are also available without the footpegs or their mounting clevis if footpegs other than those supplied are desired. 12994 Complete kit with brackets and footpegs for 5-speed FX Softail models from 1986 thru 1999.................................$65.99 12996 Mounting brackets ONLY for 5-speed FX Softail models from 1986 thru 1999 (footpegs not included).................$45.83 Note: When used as highway pegs, these footpegs should not be used under normal stop-andgo operating conditions. Mid Foot Control Kit for V-Rod Models by Kosman Specialties Designed to provide a different riding position A preferred position for comfort an sport riding A complete bolt-on kit supplied with all necessary hardware and easy to follow instructions Will only fit with aftermarket exhaust such as Vance & Hines, or Screamin Eagle exhausts will not fit with stock exhaust system The parts are machined out of aircraft grade aluminum alloy with a silver powder-coat finish 644039 Fits all V-Rod models from 2002 to present................$445.00 Hand Lighting Electrical Exhaust Intake Forward Peg Set for Late Sportster Models Easy-to-install and complete with a pair of chrome O-ring footpegs and all necessary hardware. Fits between the lower front engine mounts...............................................$64.49 26341 Fits alternator-equipped Sportster models from late 1984 thru 1997 Note: This peg set should not be used under normal stop-and-go operating conditions. Rear Passenger Peg Set for Sportster Models Special design mounting blocks utilize the threaded lugs in the Original Equipment swingarm, and the pegs provided are our world famous O-ring pegs. Sold in sets....................................................$28.99 12930 Fit all Sportster models from 1983 thru 2003 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes 190012 Frames Forks & Shocks Passenger Peg Kits for Softail Models This kit mounts in the existing tapped holes (1/2"-13) in the frame below the seat to provide an alternate footrest position for the passenger. It fits all Softail models from 1984 thru 1999 however, it is not recommended for use on FL Softail models, due to the width of the stock seats. Includes indexing washers. 13005 Complete kit with footpegs.................................$40.99 13006 Complete kit w/out footpegs................................$24.49 190178 Chrome Passenger Peg Kits for Sportster Models Fit Sportster models from 1983 thru 1999. Hardware is included. 190012 Kit with chrome O-ring pegs.................................$22.89 190178 Kit with Comfort Cruise pegs................................$49.99 Sheetmetal General 3.35 Cross Reference
Footpeg Mounts 3 Footpegs & Foot Highway Peg Blocks for Sportster Models When combined with footpegs, these chrome steel blocks provide increased comfort. Include required mounting hardware, and measure approx. 61/2"-long. Sold in pairs...........$34.99 12935 For alternator Sportster models from 1984 to present (repl. OEM 49159-88T) Note: Highway pegs should not be used under normal stopand-go operating conditions. 26366 26367 Chrome Rear Footrest Brackets Replacements for the rear brackets on 4-speed FX models thru 1981, or can be used to replace the 1982 and later one-piece welded and stamped rear footrest brackets, and the large aluminum rear brackets fitted to 4-speed FL models from 1977 thru 1984. 26366 Left and right brackets alone (1/4" steel plate)...............$18.49 26367 Bracket set (includes supports and mounting hardware).......$33.49 Frame Clamps These chrome investment cast clamps are stronger than aluminum or flat steel clamps. Designed by Radial Components, LLC. Sold each................................$45.69 22608 1"-diameter clamp 22609 11/8"-diameter clamp Ness 11/4" Clamp-On Peg Mount for Crash Bars Chrome-plated, die-cast design Accepts male mount footpegs 648305 Sold in pairs.....................$49.95 Chrome Passenger Peg Mounts Stock replacement for Sportster models from 1983 to present. Perfect for adding rear pegs to these bikes. Sold in pairs..............$25.99 12932 Replaces OEM 50610-86T Note: Passenger footpegs are not included in the kit. 12970 13004 Chrome Footpeg Clevis Universal clevis for most stock or aftermarket footpegs with male shanks. Include hardware. Sold in pairs. 13004 With female bolt mount........$24.49 13006 With male stud mount.........$24.49 17568 Footpeg bolt, nut and spring clip only (sold each).............$2.49 12971 Bullet-Style Footpeg Supports 3/8"-24 Stud Zinc-plated. Fits FL models from 1965 thru 1984 and FX models from 1971 thru 1985.......$8.29 12970 Replaces OEM 50973-65 (sold each) 1/2"-20 Stud Zinc-plated. Fits FL models from 1941 thru 1964 and FX models from 1971 thru 1972......$10.19 12971 Replaces OEM 52683-74 (sold each) 50's Boy Footpeg Extensions Made from cold-rolled steel to fit stock-style footpegs. They may be used to move pegs further from the centerline of the bike, and fit any stock-style female clevis. Footpegs are not included. Sold in pairs......................$99.99 18003 2"-long Chrome Passenger Peg Brackets for Softail Models Install under the stock mounting screws that attach the fender struts to the frame. Designed to relocate the Original Equipment passenger footpegs to a more comfortable position for passengers who lean against the sissybar. Fit all Softail models from 1984 to present.....$26.69 13007 Sold in pairs (footpegs not included) 3-Piece Frame Clamps Chrome-plated, 3-piece design eliminates spreading the clamp to fit over frames. Sold each. 15200 7/8" clamp......................$7.99 11235 1" (repl. OEM 50904-85T)........$5.89 11237 11/8" (repl. OEM 50905-85T).....$5.89 11236 11/4" (repl. OEM 50903-85T).....$5.89 3.36 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Footpeg Mounts & Extensions Apparel Bike Kits & Trailers Seats & Bags Foot Hand Chrome Footpeg Extensions for Forward Install in the Original Equipment shifter and brake control brackets, they move your footpegs lower and farther forward. Machined from 3/8"-thick, steel plate. Includes chrome-plated footpeg clevis and hardware.....$59.99 12680 Fits FX Softail, Dyna Wide Glide and 4-speed FXWG models from 1983 to present Note: These peg extensions will reduce ground clearance and increase the distance from the Original Equipment footpegs to the brake and shift controls. Offset Chrome Footpeg Extensions Provide long-legged riders with an inexpensive method of stretching out their legs without moving their controls. They move the footpegs out 31/2" from the centerline of the motorcycle and 2" forward. Fits FX Softail, Dyna Wide Glide and 4-speed FXWG models from 1980 to present....$40.99 19966 Sold in pairs (footpegs not included) Note: These peg extensions will reduce ground clearance and increase the distance from the Original Equipment footpegs to the brake and shift controls. Lighting Electrical Exhaust Intake Engine Gaskets Passenger Footrest Kit for FXR Models 3/8" steel plates that relocate the passenger pegs several inches up and forward, for improved comfort. The brackets can utilize stock footpegs or CC s 1/2" stud-mount footpeg sets (footpegs not included). Includes chrome hardware........................$55.99 26426 Fits FXR models from 1982 thru 1990 Chrome Billet Footpegs by Jardine These ball-milled chrome billet footpegs have rubber band inserts, and are perfect for highway bars, extra frame-mounted footrests or for any custom application where clamping to 1" to 11/4" inch tubing is desired...........$148.95 28394 Sold in pairs Passenger Peg Brackets These chrome billet rear footpeg brackets feature ball mill design and a sloped contoured shape. They extend the rear pegs further forward providing the passenger with a more comfortable ride.............................$85.99 190202 Fits all Softail models from 1984 thru 1999 or custom applications Footpeg Anti-Sag D-Clips Take the sag out of droopy male mount footpegs. Replace the Original Equipment D-clips with spring steel D-clips that have a integral shim to put pegs back to a flat and level position....$2.05 per pair 12704 Card of ten pairs 19961 19960 19959 Replacement Footpeg Bars Chromed steel bars for 5/8" female mount footpegs. Includes a 3/8"-16 x 3/4" grade 5 chromeplated bolt and lockwasher. Use as replacements for broken pegs. Sold each. 19959 2"-long..........................$8.34 19960 4"-long..........................$9.84 19961 5"-long.........................$11.14 Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.37 Cross Reference
Shift Linkages 19318 19317 19511 3 Footpegs & Foot Shift Linkages by Paul Yaffe Originals Perfect addition to your custom bike Carved from 6061 T-6 aluminum and then beautifully chrome-plated Available in 2 styles Fit all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003) Sold each...........................$129.99 600020 Groovy Missing Link 600021 Holy Missing Link 19318 19294 Chrome Shift Linkage Measures 103/4"-long with 5/16"-24 threads, and is chrome-plated. Fits Dyna Wide Glide and 5-speed Softail models with forward controls from 1986 to present (except FLSTS models from 1997 thru 2003), as well as other custom applications. 19294 Complete kit (replaces OEM 33728-90A).......$36.49 19318 Shifter rod ONLY (replaces OEM 11729).............$8.34 Landry Shift Linkage by Paul Yaffe Originals This unusual link was originally created from the mind of veteran machinist Brian Landry. It has so many facets that light dances off the beautiful chrome-plating like a diamond ring!....$159.99 600035 Measures 12"-long with 5/16" male heim joints Chrome Steel Shift Linkage by Motherwell Products Quality chrome-plated steel shift linkage is machined with slotted detail on each side. Fits 5-speed Softail models with Original Equipment forward controls from 1986 to present (except 1997 thru 2003 FLSTS models)....$57.75 37480 Sold each Pro-One Chrome Shifter Rods Replaces the Original Equipment shifter rod on all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003)..........................$62.95 65141 Ball milled 65142 Cut-out style 65179 Ball milled, for extended forward controls (3"-longer than stock) 19513 Chrome Shifter Linkage Includes gear shifter rod end, shoulder bolt with locknut, shifter rod and clevis. Fits 1971 thru 1973 FX models and 1952 thru 1984 FL foot shift models......$29.99 19317 Complete kit Chrome Shifter Rod Fits all Softail models from 1986 to present (except FLSTS models from 1997 to present). 19318 Replaces OEM 11729..............$8.34 Chrome Rod End Fits all Big Twins from 1937 thru 1966 with hand or foot shift...............................$7.89 19511 Replaces OEMs 33870-51, 33871-67 Chrome Clevis Pins These chrome-plated clevis pins include the washer and cotter pin. Fits many applications from 1930 to present.....................$12.49 19513 Replaces OEM 42269-30 (pack of 10) Shift and Glow Lighted Shifter Rods by Glow-Job A unique part that will make your bike stand WAY OUT in any crowd! They feature neon lighting on a polished stainless steel shift rod. New heim joints are not even necessary, just use your existing ones to hook the Shift and Glow right up. It's fully adjustable and will make any bike look like a custom masterpiece! They fit all 5-speed Softail models from 1986 to present (except FLSTS models). 690212 Yellow.........................$299.95 690213 Green..........................$299.95 690214 Orange.........................$299.95 690215 Red............................$299.95 690216 Blue............................$299.95 690217 Purple..........................$299.95 3.38 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Shift Linkages Apparel 16570 16574 16571 16574 05577 05574 05573 Bike Kits & Trailers Seats & Bags Foot 16573 05575 Hand Polished Stainless Steel Shift Linkages for Softail Models by Landmark Adds sparkle to the primary side of your Softail model. Includes easy-toinstall tranny lever cover, aircraft-quality rod ends and custom hardware. Fit 5-speed Softail models with Original Equipment forward controls from 1986 to present (except FLSTS models from 1997 thru 2003). 16570 Diamond 2.................................................$154.19 16571 Twisted.....................................................$98.04 16573 Ball Milled.................................................$154.19 16574 Slotted....................................................$154.19 Ness-Tech Shifter Rods Chrome-plated billet shifter rods are available in four styles to get the right custom look. They fit stock forward controls on all Softail models from 1986 to present (except FLSTS models from 1997 thru 2003). 05573 V style.....................................................$89.95 05574 See-Thru style..............................................$74.95 05575 Round Grooved style.......................................$69.95 05577 Flat Grooved style..........................................$74.95 Lighting Electrical Exhaust Intake Shift Linkage for Softail Models with Crossover Exhaust by Landmark Top-quality polished stainless steel by Landmark won t peel, pit, chip or discolor. Easy-to-install, includes all hardware....................$100.99 16580 Fits FLSTS Heritage Springer Softail models from 1997 thru 2003 Death Series Shifter Rods by Thunder Cycle Designs An offspring of the original Death Series Smooth hourglass shape to dress-up your Softail model Machined from billet aluminum with show chrome quality finish Available in 3 different lengths Fit all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003) 644018 91/2"-long...................................................$79.95 644019 101/2"-long.................................................$79.95 644020 121/2"-long for 3" extended forward controls................$79.95 Engine Gaskets Tranny & Clutch Driveline Small-Diameter Shift Linkages by Landmark Complete sets that include the rod, heim joints, lever shroud and hardware. Available in highly-polished stainless steel versions, or chrome-plated. Features a smaller diameter rod than Landmark s standard round rods. Polished Stainless Steel 16499 3"-extended for all 5-speed Softail models (except FLSTS) from 1986 to present (133/4"-long)...........................$90.34 Chrome-Plated 16320 Fits all 5-speed Softail models (except FLSTS) from 1986 to present (103/4"-long).....................................$55.99 16321 3"-extended for all 5-speed Softail models (except FLSTS) from 1986 to present (133/4"-long)...........................$55.99 16322 4"-extended for all 5-speed Softail models (except FLSTS) from 1986 to present (143/4"-long)...........................$55.99 16324 Fits all Dyna Wide Glide models from 1993 to present.......$55.99 Hi-Lo Smooth Diamond Polished Stainless Steel Shift Linkages for Softail Models by Landmark Manufactured from aircraft-quality stainless steel and polished to shine like chrome. Each kit includes the hardware and heim joints. Lengths are measured from eye-center to eye-center. Fit all 5-speed Softail models from 1986 to present (except FLSTS models from 1997 thru 2003)...$119.14 16422 Smooth 16455 Hi-Lo 16479 Diamond Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.39 Cross Reference
3 Footpegs & Foot Shift Levers 12454 discontinued 12456 26192 12449 12451 Girder Shift Lever by KüryAkyn Not only is this shift lever hot looking, it also provides increased leverage for easier, more precise shifting. Includes slide in cover to hide the OEM shift spline. Fits Softail, Dyna Glide and FXR models from 1982 to present....$59.95 48230 Girder shifter arm Chrome Brake Pedal and Shift Lever for Floorboard Models Upgrade your Original Equipment brake and shift controls with these beautifully-crafted aluminum designs from Billet Concepts. Fits FL Softail models from 1986 to present and 5-speed Touring models from 1997 to present...$444.99 47355 Sold in sets 12452 12455 12467 26193 Shifter Shaft Cap Use this chrome plated cap to cover the shifter shaft when installing forward controls. The cap is held in place with a flush mount sockethead screw. Fits FX, FXR and Dyna Glide models with mid-shift, and wrench is included.........$13.99 060188 Sold each Chrome Shift Rod Spherical Joint Improves the looks of shifter linkages. Fits all Softail models from 1986 thru 1996, most aftermarket forward control sets and many early models. Sold each........................$15.59 78351 Replaces OEM 24490-36 Chrome Shift Levers 12452 Fits all FXR models from 1982 thru 1994 (repl. OEM 34599-81T)...................................$16.74 12467 Fits FL models from 1974 thru 1984, and FXWG models from 1980 thru 1986 with splines (repl. OEM 34606-74)...$15.99 12456 Fits all FL models from 1965 thru 1984 with splined shafts (repl. OEM 34692-74TA)...........................$31.99 12454 Fits all FX models 1974 thru 1985 with thru-the-case shifters, and all Dyna Glide and Softail models (except FL Softail models) from 1986 to present (repl. OEM 34564-74TA)....$14.94 060214 Outer lever for FLT, FLHT, FLHS and Road King models from 1983 thru 1999, and FL Softail models from 1986 to present (repl. OEM 33640-83).........................$25.99 26193 Fits all 5-speed Evolution Sportster models from 1991 to present (repl. OEM 34606-90T)........................$18.29 12449 Fits Evolution Sportster models from 1986 thru 1990 (repl. OEM 34605-86TB).................................$16.74 26192 Fits Sportster models from 1977 thru 1985 (repl. OEM 34606-75T)...................................$22.99 12455 Fits Sportster models from 1955 thru 1974, and early Big Twin models without splined shafts (repl. OEMs 34606-54TA, 34606-71)......................$21.49 12451 Polished shift lever for Sportster models from 1975 thru 1976 (repl. OEM 34666-75)..........................$36.49 12465 28039 Chrome Shifter Shafts Chrome-plated shifter shafts to replace the stock parts on Big Twins from 1970 to present. Fits all 4-speed FL models from 1974 thru 1984 with splined shafts.......................$22.29 12465 Replaces OEM 33660-74A Fits 5-speed FXR models with diaphragm clutch from late 1984 thru 1994. 28039 Replaces OEM 34621-84..........$30.09 Fits FXWG and FX Softail models from late 1985 thru 1989. Also popular when removing heel/toe shifters on Fat Boy and Heritage Softail models. Splined shaft shoulder bolt type. 060069 Replaces OEM 33660-85..........$15.49 Fits FL Softail models from 1990 to present. 060908 Replaces OEM 33668-90B........$24.49 Retaining ring for the shift arm on 4-speed models from 1965 thru 1986...............$3.49 12468 Replaces OEM 11031 (pack of 10) 3.40 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Heim Joints & Toe Pegs Apparel 070403 Bike Kits & Trailers Landmark Heim Joints Aircraft-quality rod ends ensure durability and smooth shifting. Replace most heim joints with 5/16"-24 right hand threads. Sold each. 16586 Stainless steel.....$27.44 16327 Chrome...........$24.49 Chrome Heim Joints These flawlessly-plated units can serve a variety of uses, particularly when fabricating custom shift and brake linkages. The 5/16" heim joints are available with right and left hand threads to make links that are adjustable without disassembly. Made in the U.S.A. Sold each........................$28.59 19297 1/4" x 1/4-28 female 19298 5/16" x 5/16-24 male 19299 5/16" x 5/16-24 female 19302 5/16" x 5/16-24 male (left hand thread) 19301 3/8" x 3/8-24 female Chrome Shifter Rod End Replacement chrome shift rod end for Softail models from 1984 to present, 4-speed FXWG models from 1980 thru 1986 and Dyna Glide models from 1991 thru 1992. Also great for custom linkage applications using 5/16"-24 threads (replaces OEM 33871-85)....$15.59 060052 Sold each 070224 070225 070229 Foot Clutch for Big Twins Chrome reproduction of the rocker style foot clutch assembly found on hand shift Big Twins from 1965 thru 1978. Ideal for vintage restoration or foot clutch/hand shift conversions on 4-speed Big Twins from 1941 thru 1978. Works with steel or aluminum primary covers when appropriate clutch releasing lever and rod is used (replaces OEM 36810-65A). 060075 Foot clutch assembly only, clutch rod not included..........$185.99 Note: Use CC #19079 releasing lever and CC #070225 rod with tin primary. Replacement Parts 070224 Rod end (replaces OEM 36916-36)............................$5.89 070225 Clutch rod for tin primaries (replaces OEM 36917-36).........$10.99 070229 Clutch rod with rod end and jam nut for aluminum primaries (replaces OEMs 36917-65, 36916-36 and 7638)................$22.99 070402 Spring (replaces OEM 36880-36).............................$12.49 070403 Pivot bearing cover (replaces OEM 36830-36).................$15.49 Seats & Bags Foot Hand Lighting Electrical Exhaust Intake 19955 Engine 12974 Discontinued Gaskets Shift Rod and Heim Joints This is the Original Equipment part with chrome-plating. Fits all 4-speed FX models (except FXWG and Softail models) from 1974 thru 1985. The stock hardware keeps it in place......$52.99 19315 Replaces OEM 34614-74 12345 12346 Tranny & Clutch Driveline Death Series Smooth Shifter Pegs by Thunder Cycle Design The original Death Series CNC-machined from billet aluminum with show chrome quality Enhances your custom bike like no other Includes 5/16" mounting bolt for installation 644016 3"-long (sold each)....................$39.95 644017 4"-long (sold each)....................$49.95 Shifter Toe Pegs Wide selection of toe pegs in the market from stock to custom. Sold each. 12974 Black rubber toe peg with chrome end cap and short stud.....$8.39 12345 Stock replacement black rubber toe peg with short stud (repl. OEM 34611-65T)........................................$4.49 12346 Stock replacement black rubber toe peg with long stud (repl. OEM 34609-52T)........................................$4.49 19955 Round O-ring toe peg (repl. OEM 34631-84T).................$9.49 Replacement O-Rings 19957 Fits CC #19955 (repl. OEM 49030-84T).........................$6.69 Wheels, Tires & Brakes Frames Forks & Shocks Sheetmetal General 3.41 Cross Reference
Shifter Brackets/Covers & Brake Pads 3 Footpegs & Foot Shift Lever Brackets Made from heavy-gauge steel with added support plates in the peg mount area for superior strength and styling. Does not crack like the Original Equipment item or other aftermarket parts. Beautifully polished and chrome-plated, and complete with bushing and zerk fitting installed, ready for use. 28033 Fits 4-speed FL models from 1970 thru 1984 (repl. OEM 33630-70).......$48.49 060141 Fits FL Softail models from 1990 thru 1999 (repl. OEM 33630-90A).....$46.99 Shifter Anti-Rattle Kits Tighten up that rattling shifter arm. Bushing and washer kit helps to tighten up loose shifters. 26556 Fits floorboard-equipped 5-speed models with heel/toe shifters from 1980 to present.............$19.49 26683 Fits 5-speed FX Softail models from 1986 thru 1999..............$19.49 26557 Fits 5-speed Touring models from 1980 to present when converting from heel/toe shifter to toe shifter.....$21.49 26684 Fits FL Softail models from 1986 thru 1999 when converting from heel/toe shifter to toe shifter.....$21.49 Doss Brake Pedal Cover Replaces the Original Equipment rubber pad. Chrome-plated steel with protruding rubber ribs looks great by itself or with matching Doss floorboard pads...........................$54.49 46303 Fits FL Softail models from 1986 to present and FLT, FLHT, FLHS and Road King models from 1983 to present Matching Floorboard Covers Matching styling in a chrome-plated billet floorboard covers with rubber tread inserts. Includes 8 new rubber isolation bumpers...........$76.29 46600 Fit all Original Equipment or aftermarket rectangular floorboard bases Chrome Shifter Support Bracket This custom shifter bracket fits 4-speed FL models from 1952 thru 1984. Also may be used as a forward control bracket on 4-speed FX models from 1971 thru 1985.....................$34.99 060018 Replaces OEM 33630-52 Doss Shifter and Kickstand Bracket Cover Durable stamped steel construction and ribbed accents cover the Original Equipment bracket and minimize the cluttered look.........................................................................$79.99 46065 Fits all FL Softail models from 1989 thru 1999 Note: Will not work with Original Equipment highway bars. Chrome Steel Shifter Bracket Fits FX Softail models with peg style forward controls from 1990 thru 1999.............$61.69 17588 Replaces OEM 33683-90A Chrome Shifter Support Bracket This heavy duty bracket features a built-in footpeg mount and chrome finish. Works with large or small diameter spade mount footpegs. Fits FXWG models from 1980 thru 1986 and FX Softail models from 1984 thru 1985. 060043 Replaces OEM 33683-80.........$54.49 3.42 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Brake Pedals & Pads Apparel 130408 Bike Kits & Trailers Seats & Bags Foot KüryAkyn ISO Brake Pedal Pad for Touring and Softail Models Replaces the stock pad with a larger, more comfortable footing surface. Fits FL Softail and 5-speed Touring models from 1980 to present. 130408 Brake pad kit..............$25.24 130409 Replacement rubber pads...$8.14 130409 Regency Multi-Position Extended Brake Pedals The ultimate brake pedal! Extended length allows more room for your foot and offers increased leverage for extra braking power. Unique adjustable feature allows multi-positioning for maximum comfort. For use with floorboard models.......................................................$149.99 46849 Fits all FL Softail models from 2000 to present 46850 Fits all FL Softail models from 1991 thru 1999 and Touring models from 1997 to present Hand Lighting Electrical Exhaust 130395 Intake Engine 130396 Gaskets KüryAkyn ISO Brake Pedal Pads for Softail Models Provides additional brake pedal surface area and matches ISO pegs. Fits FX Softail and Dyna Wide Glide models from 1984 to present, and 1983 thru 1986 4-speed FXWGs. 130395 Standard....................................................$19.95 130396 Longhorn (25% larger)......................................$23.64 BEFORE Tranny & Clutch Driveline Wheels, Tires & Brakes 130413 AFTER Frames 130412 Brake Pedal Pads Fits FX Softail and Dyna Wide Glide models from 1984 to present, and 1983 thru 1986 4-speed FXWGs. 130412 Slotted......................................................$21.49 130413 Diamond....................................................$22.99 Stock Look Extended Brake Pedals by Walter s Workshop The extra length provides more room for your foot and extra braking power. Made of chrome steel. Accepts Original Equipment and aftermarket pedal pads. Sold each..............................................$163.69 28861 Fits Softail models with floorboards from late 1987 thru 1999 28863 Fits Softail models with floorboards from 2000 to present 28862 Fits all Touring models with floorboards from 1997 to present Forks & Shocks Sheetmetal General 3.43 Cross Reference
Brake Pedals & Pads Hydraulic Brake Pedal for FL Models A chrome-plated pedal for FL models from 1973-early 1979....$40.99 28006 Replaces OEM 42402-73A 3 Footpegs & Foot Brake Pedal Rubber Replacement black rubber for the brake pedal on all early 4-speed FL models.............$4.84 12243 Replaces OEM 36954-62T (sold each) Brake Pedal Pad Replacement pad for FX Softail and Dyna Wide Glide models from 1984 to present, and 1983 thru 1986 4-speed FXWGs.................$6.49 12989 Replaces OEM 42532-82T (sold each) Late Hydraulic Brake Lever Plate Fits FL models from 1973-early 1979......$33.49 19536 Replaces OEMs 42480-73, 42401-73A 15910 15911 Chrome Brake Pedal Nut Cover Hide the ugly nut and washer on floorboard brake pedals. Chrome-plated cover installs easily......................................$9.49 15191 Fits FL Softail models from 1986 to present Hydraulic Brake Stop Fits the master cylinder on 4-speed FL models from 1970-early 1979 and FX models from 1971-early 1972...........................$9.19 19537 Replaces OEM 42411-70T Chrome Hydraulic Brake Pedal and Backing Plate Fit FL models from late 1959 thru 1969. 15911 Brake pedal (repl. OEM 42402-59)............$38.04 15910 Pedal backing plate (repl. OEM 42480-59)............$38.39 Brake/Master Cylinder Springs Brake shoe return springs. Fits all Sportster mechanical brakes and 1949 thru 1971 Big Twin front brakes only.........................$10.99 19516 Replaces OEM 41835-69) (sold in pairs) Chrome hydraulic brake pedal return spring. Fits 1958 thru 1984 4-speed Big Twins.....$7.99 19316 Replaces OEMs 41835-69, 42427-58) (sold each) Brake Pedal Pad Kit Provides you with you a larger, easier-to-use rear brake pedal. Fits most Big Twin models from 1965 thru 1986. 28126 Kit (replaces OEM 36956-65TA)....$9.99 12241 Brake pedal rubber only (replaces OEM 36964-67)..........$4.29 Brake Pedal Return Spring Chrome-plated return spring with rubber-coated ends to prevent scratching. Fits all FX models from late 1972-early 1979.................$2.99 17578 Replaces OEM 42425-71 3.44 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Master Cylinders & Accessories Apparel 26255 Bike Kits & Trailers Seats & Bags Foot Hand Master Cylinder and Brake Pedal Pivot Cover Kit Dress-up the industrial look of the rear master cylinder and brake pedal pivot with chrome-plated stamped steel cover kit. 46326 Two-piece kit for FX Softail models with Original Equipment forward controls from late 1987 thru 1999 (banjo bolt in the master cylinder)...........................................$87.39 25909 Lighting Electrical Exhaust 19069 12437 12436 19073 19070 Intake 19071 19072 Chrome Brake Rods and Rod Clevis 19069 Foot pedal brake rod 10"-long (front). Fits 1937 thru 1957 Big Twins (replaces OEM 42326-37)...........................$9.99 19070 Rear brake rod 23"-long. Fits 1937 thru 1957 Big Twins (replaces OEM 42257-36)...................................$12.99 12437 Short clevis for foot pedal brake rod. Fits 1937 thru 1957 Big Twins (replaces OEM 42333-30)...........................$9.99 12436 Long clevis for foot pedal brake rod. Fits 45s from 1935 thru 1952, 1937 thru 1957 Big Twins and 1934 thru 1950 Servi-Cars (replaces OEM 42273-30).........................$11.69 19071 Rear brake rod and clevis 225/16"-long. Fits Sportster and K models from 1952 thru 1966 (replaces OEM 42252-52).....$14.99 19072 Rear brake rod and clevis 237/8"-long. Fits Sportster models from 1967 thru 1974 (replaces OEM 42253-67)...............$14.44 19073 Brake rod adjusting nut. Fits Sportster and K models (except XLCR) from 1952 thru 1978 (replaces OEM 42264-52)................$5.39 26072 Chrome Late-Model Rear Master Cylinders Chrome-plated reproductions of the 5/8"-bore Original Equipment units with the ribs polished off before plating. The units for 1987 to present models also feature custom top covers. 26255 Fits Sportster models from 1982-early 1987 and FL Softail models from late 1986-early 1987 (repl. OEMs 42453-82A, 42454-82)...........................$99.99 25909 Fits Sportster models from late 1987 to present (repl. OEM 42456-87B).....................................$150.99 26072 Fits FL Softail models from late 1987 thru 1999 (repl. OEM 42468-87D).....................................$150.99 26687 Replacement cartridge assembly for CC # s 25909, 26072 (repl. OEM 42382-87A)......................................$46.99 26069 Rebuild kit for CC #26255....................................$13.99 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Reproduction Brake Parts Long-obsolete parts are beautifully chrome-plated to help keep that vintage iron running and on the road. 38722 Front mechanical brake rod for UL, EL, and FL models from 1937 thru 1957 (replaces OEM 4073-37CH)...................................................$24.19 38724 Clevis kit with clevis, pin, washer, cotter and nut for front mechanical brake rod on rigid Big Twins from 1937 thru 1957 (replaces OEM 42333-30CH)...........$24.19 38723 Rear mechanical brake rod for UL, EL and FL models from 1937 thru 1957 (replaces OEM 4065-36CH)...................................................$24.19 38725 Clevis kit with clevis, pin, washer, cotter and nut for rear mechanical brake rod on rigid Big Twins from from 1937 thru 1957 (replaces OEM 42273-30CH).....$24.19 3.45 Forks & Shocks Sheetmetal General Cross Reference
Master Cylinders 09980 3 Footpegs & Foot Premium Master Cylinder A complete Wagner-Lockheed master cylinder assembly from the Original Equipment supplier. For hydraulic drum brake applications on FL models from 1958 thru 1972 or FX models from 1971 thru 1972. Note: Use only DOT 3 brake fluid. Will fit rear disc brake applications on FL and FX models from 1973-early 1979 if the residual pressure check valve is removed. 56400 Complete master cylinder (repl. OEM 41761-58)............$93.29 12535 Imported rebuild kit (repl. OEM 41762-58A)...........$20.69 26254 Dust boot for 1958 thru 1969 Big Twins (repl. OEM 41764-58) pack of 10.......................$15.49 28129 Dust boot for 1970-early 1979 Big Twins (repl. OEM 41764-70) pack of 5....$11.39 26101 26248 17552 Wagner-Lockheed Type Master Cylinders Fit hydraulic drum brake applications on FL models from 1958 thru 1972 or FX models from 1971 thru 1972, and rear disc brake applications on FL and FX models from 1973-early 1979. Master Cylinders For drum brake applications from 1958 thru 1972 (replaces OEM 41761-58) 26222 Chrome..........................$65.69 26251 Ball burnished....................$54.49 For disc brake applications from 1973-early 1979 (replaces OEM 41761-73) 26218 Chrome..........................$57.29 26219 Ball burnished....................$52.89 Replacement Parts 12535 Imported rebuild kit (repl. OEM 41762-58A)...........$20.69 130616 Rebuild kit. Fits disc or drum brake applications 1958-1979...........$15.49 26224 Replacement chrome cap ONLY...$12.49 09982 GMA Chrome Master Cylinders These American-made CNC-machined billet aluminum master cylinders have a 5/8"-bore to produce more pressure and increase stopping power. They re available with Wagner or Kelsey- Hayes pattern mounting holes, and designed to work with GMA and other aftermarket calipers with dual pistons. The brake hose end is tapped to 3/8"-24 NPT and can be adapted to most brake lines (except those with Banjo fittings). 09980 Wagner-style mounting holes (staggered).....................$135.69 09982 Kelsey-Hayes style mounting holes (horizontal)....................$135.69 28139 Replacement top cover gasket (pack of 5) repl. OEM 42455-80....$18.49 Note: These are custom master cylinders and will not necessarily bolt-up to all Original Equipment components. We recommend only a qualified bike builder install these units. Kelsey-Hayes Type Master Cylinders Chrome reproductions of the Kelsey-Hayes master cylinder. Fits 1980 thru 1981 Sportster models, late 1979 thru 1982 FX models and 1983 FXEs. Kit includes all internal components, boot, cover gasket and chrome top cover. 26248 Complete 3/4"-bore master cylinder for applications using Original Equipmentstyle rear calipers (repl. OEMs 42453-80A, 42454-80A)......................$64.79 17552 Complete 5/8"-bore master cylinder for custom applications with multipiston calipers....................$66.89 26101 Replacement master cylinder rebuild kit for CC #26248 (repl. OEM 42374-77B)............$17.49 28139 Replacement master cylinder cap gasket (repl. OEM 42455-80)......$18.49 26243 Replacement rubber dust boot (repl. OEM 41764-79).............$10.99 Note: CC #26248 master cylinder may also be installed on 1979 Sportster models if modifications are made to the hard line between the brake tee and the master cylinder. Chrome Rear Master Cylinder Chrome-plated reproduction of the Girling master cylinder fitted to all FX models from 1983-early 1987 (except 1984 FXE). May also be installed on 1982-early 1987 FXR models, but the pipe plug on the back will have to be removed for stop light switch installation..........$75.99 26249 Replaces OEMs 42446-82A, 42470-82A Rear Master Cylinder by Tolle Manufactured especially for the Tolle Disc Brake kits CC # s130230 and 130231. Not only is it an attractive matching accessory to the Disc Brake kit, it is recommended by Tolle to really get the most out of your set-up. 13mm bore master cylinder is just over 1/2" diameter- providing more brake pressure than the stock bore master cylinders. Billet aluminum construction, mirror polished with Tolle logo machined into the top cover, smooth rounded bottom. 130232 Fits late 1979 to present.......$272.50 3.46 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Master Cylinder Rebuild Kits Apparel Bike Kits & Trailers Seats & Bags Late-Model Master Cylinder Rebuild Kits Includes everything needed to completely rebuild stock handlebar master cylinders on models from 1996 to present. 26774 For 9/16" bore single front disc master cylinder (repl. OEM 45006-96).....$17.59 26773 For 11/16" bore dual front disc master cylinder (repl. OEM 45072-96).....$17.59 Rear Master Cylinder Mounting Hardware Replacement master cylinder mounting studs to fit FL Softail models from late 1986 thru 1999. 98697 Sold in pairs (repl. OEM 42301-87A) $5.44 Rebuild Kit for Kelsey-Hayes Master Cylinders Complete rear master cylinder rebuild kit for all Sportster models from 1979 thru 1981, FL models from late 1979 thru 1984, FX models from late 1979 thru 1983 and FLT/FLHT models from 1980 thru 1985.........................$17.49 26101 Replaces OEM 42374-77B Foot Hand Lighting 28138 Electrical 26243 28129 Exhaust Intake Rear Master Cylinder Cartridge Assembly Simplifies rebuilding the master cylinder. Fits Softail, FXR and Sportster models from late 1987 to present and Touring models from 1992 to present..........................$46.99 26687 Replaces OEM 42382-87A Early Master Cylinder Cover Gasket Fit all models from 1972 thru 1981 (pack of 10)..$13.69 each 10432 Replaces OEM 45012-72 26254 Master Cylinder Boots Fits the rear master cylinder on 1980 thru 1981 Sportster models, late 1979 thru 1982 FX models, and 1983 FXE models.................$10.99 26243 Replaces OEM 41764-79 (pack of 5) Fits the rear master cylinder on most models from 1980-early 1987.....................$20.69 28138 Replaces OEM 40922-79 (pack of 5) Fits the rear master cylinder on Big Twin models from 1970-early 1979.....................$11.39 28129 Replaces OEM 41764-70 (pack of 5) Fits the rear master cylinder on Big Twin models from 1958 thru 1969.....................$15.49 26254 Replaces OEM 41764-58 (pack of 10) Master Cylinder Rebuild Kits for FXR, Dyna Glide and FLT/FLHT Models All the components needed to restore braking performance. 26062 Rear for all FLT, FLHT and FLHS models from 1987 thru 1992 (repl. OEM 42374-86).............$12.89 26061 Front for all FLT, FLHT and FLHS models from 1987 thru 1995; FXRT and FXRS models from 1987 thru 1992 and Dyna Glide models from 1991 thru 1994....................$9.29 Engine Gaskets Tranny & Clutch Driveline Wheels, Tires & Brakes Frames Late Master Cylinder Cover Gasket Fits the rear master cylinder on late 1979 thru 1984 FL and late 1979 thru 1982 FX models, the rear master cylinder on 1977 thru 1981 Sportster models as well as the rear master cylinder remote reservoirs on all Big Twin models from 1982 to present.......$3.70 ea 28139 Replaces OEM 42455-80 (pack of 5) Rear Master Cylinder Rebuild Kits Complete rear wheel master cylinder rebuild kit. 26125 Fits all Sportster models 1982-early 1987; FX models 1983 thru 1986; Softail models 1984-early 1987 (repl. OEM 42374-82A)...........$18.59 Master Cylinder Rebuild Kits Rear master cylinder rebuild kit for all models from late 1987 to present................$33.99 85472 Replaces OEM 42382-87A Forks & Shocks Sheetmetal General 3.47 Cross Reference
Master Cylinder Fittings 26311 020538 3 Footpegs & Foot 110531 28190 Chrome Brake Line Fittings These brake line fittings are used on handlebar mounted master cylinder and front or rear brake line tees. Fit many models from 1972 thru 1981. Sold in packs of 5. 020538 Plug 1/8" NPT (repl. OEM 42311-58)............$12.49 110531 Straight male 1/8" NPT to female 3/8"-24 inverted flare (repl. OEM 63609-72).............$9.49 28190 90 right-angle fitting 1/8" NPT to female 3/8"-24 inverted flare. Connects the front brake line to the handlebar master cylinder and brake tee. (repl. OEM 43307-78)............$22.99 Master Cylinder Spacers Chrome spacers have a 3/8"-diameter hole, are 1/4"-thick and fit between the Wagner-Lockheed style rear master cylinder and its backing plate. Fit all Big Twins from 1958- early 1979, and can be used as a universal spacer in other applications.......................$6.29 19509 Replaces OEM 50668-35 (pack of 5) 26310 Washers for Banjo Bolts Sealing washers for the front and rear banjo fittings. Sold in packs of 10.................$11.29 26310 10 mm. Fits dual disc handlebar master cylinders from 1982 to present, and brake calipers on most models from 1984 to present (repl. OEM 41731-88) 26311 12 mm. Fits all single disc handlebar master cylinders from 1984 to present (repl. OEM 41733-88) 26271 26270 Chrome Banjo Bolt Kits Replacement items for CC or Original Equipment master cylinders and calipers. Available for most models from 1982 to present. Includes washers. Sold each. 26270 For 10mm banjo fittings.........$10.99 26294 For 12mm banjo fittings..........$6.94 26271 For 10mm banjo bolts with 12mm brake lines...........$10.99 Goodridge Chrome Double Banjo Bolt This chrome banjo bolt allows 2 banjos to be fitted for dual caliper applications. Use it on front dual disc models to run lines directly from caliper to master cylinder and eliminate T fittings, or on the rear to link two calipers together. 3/8"-24 threads fits most front dual disc master cylinders, rear calipers and rear master cylinders from 1982 to present.....$8.09 130789 Sold each Crush Washers Top-quality washers are made in the USA for the following applications. Sold in packs of 10. 56236 Master cylinder for Big Twins from 1983 thru 1989; Sportster models from 1982- early 1989 (repl. OEM 41731-82)....$9.49 56237 Master cylinder for Big Twins from 1984 thru 1991; Sportster models from 1984- early 1991 (repl. OEM 45583-83).....$9.49 56242 Brake line for Big Twins from 1958 thru 1972 (repl. OEM 41744-58)........$8.74 110595 110596 Donnie Smith Signature Series Banjo Bolt A highly visible item that s often overlooked by custom builders, this brake banjo bolt is a great place to start your Signature Series collection. Designed not only to look good but, be easy to fasten with a conventional wrench. Available for front and rear applications. Sold each. 110595 3/8"-24 banjo bolt. Fits 10mm banjo on front dual disc master cylinders and rear master cylinders and calipers 1982 to present (repl. OEM 41747-82)....$12.49 110596 7/16"-24 banjo bolt. Fits 12mm banjo on front single disc master cylinders 1983 to present (repl. OEM 41739-84)....$12.49 Precision Performance Banjo Bolt 3/8"-24 banjo bolt fits 10mm banjo on models from 1982 to present, and includes sealing washers (repl. OEM 41747-82).............$7.99 662000 Sold each Russell Brake Light Switch Banjo Bolt Features integral threaded 3/8"-24 tap to accept standard brake light switch. Thread switch into banjo and then into master cylinder. Eliminates additional tee for brake light switch...............................$13.29 13997 Sold each 3.48 Prices appearing in this catalog are Suggested Retail Price and are subject to change*
Master Cylinder Covers & Plungers Apparel 340836 Bike Kits & Trailers Seats & Bags 131721 340835 Rear Master Cylinder Cover Chrome stamped steel rear master cylinder cover............................$41.09 130019 Fits all 5-speed Sportster models from 1991 thru 1999. Foot Brake Light Banjo Bolts by Goodridge Combines a banjo bolt with a brake light pressure switch. Great for custom work. Zinc-plated or gold with flexible plastic sleeve covers and 11"-long wiring pigtail. Two sizes available for disc brake applications. Sold each. Gold 131721 3/8"-24 for 10mm banjo.........$19.39 131723 7/16"-24 for 12mm banjo........$19.39 Zinc-Plated 14137 3/8"-24 for 10mm banjo.........$18.99 14138 7/16"-24 for 12mm banjo........$17.79 Donnie Smith Signature Series Brake and Shift Covers These stamped steel covers are designed to fit over the brake or shift brackets on FL Softail models with factory floorboards from 1987 to present. Easy bolt-on application.........$21.99 340835 Shifter cover 340836 Brake cover Hand Lighting Electrical Exhaust KüryAkyn Rear Master Cylinder Cover for Late Sportster Models This chrome-plated die-cast cover completely covers the rear master cylinder and incorporates a fluid level viewing window.............$39.95 48210 Fits all 5-speed Sportster models from 1991 thru 1999 Intake Engine Gaskets Chrome Master Cylinder Reservoir Chrome-plated A.B.S. plastic reservoir that replaces the black Original Equipment item. Fits Big Twins with late-model reservoir-style master cylinders from 1982 thru 1999. 26250 Replaces OEM 41800-81A........$15.49 28139 Cover gasket (repl. OEM 42455-80) pack of 5........................$18.49 Master Cylinder Cover Fits 4-speed FL models from late 1979 thru 1984, FLT models from 1980 thru 1982, FXWG models from 1980 thru 1982, and FL Softail models from 1987 to present.....................$18.49 130008 Replaces OEM 41745-79T Rear Master Cylinder Cover This chrome cover is a snap to install and will add a custom touch......................$15.99 130018 Fits all FLHT and Road King models from 1997 thru 1999 Tranny & Clutch Driveline Wheels, Tires & Brakes Frames 28071 Forks & Shocks Doss Speed Line Plunger for Softail Models This chrome-plated steel master cylinder plunger features distinctive styling and fits FX Softail models from late 1987 thru 1999.........$21.99 46333 Sold each 25231 Chrome Master Cylinder Plungers Fits all Big Twin models with Wagner Lockheed master cylinders. Sold each...............$16.79 25231 1958 thru 1969 (repl. OEM 41770-58) 28071 1970-early 1979 (repl. OEM 42333-70) Sheetmetal General 3.49 Cross Reference