SPECIALISTS IN ELECTROMAGNETIC SOLENOIDS DEVICESAND SOLUTIONS On/Off- Solenoid to RL 94/9/EG (ATEX 95) 4 Product Group G HP E Pamphlet To DIN VDE 0580 and RL 94/9/EG (ATEX 95) Pressure-tight armature space, rated operating pressure 250 bar Magnetic force/stroke characteristic Quick floating times Pushing type Mounting via central thread Simple exchange of the coil without opening the hydraulic circuit Coil winding to insulation classification H Electrical connection and protection class if mounted properly: Connection cable Li12Y11Y 3 x 1.5 Protection class to DIN VDE 0470/EN 60 529 - IP67 Explosion protection II 2G EEx m II T4 Supplementation of permission for dust guard, 2D, is being prepared. Manual override Modifications and special designs on request Application examples: Actuation of hydraulic and special valves Fig. 1: G HP E 037 AMX A01 Magnet-Schultz GmbH Limited & Co. Postfach 3-4 Capital 1665 Park D 87686 Memmingen Old Woking Allgäuer Surrey Straße 30 GU22 D 87700 9LD Memmingen UK Phone: Telefon ++44 ++49 (0) (08331) 1483 794700 104-0 Fax: Telefax ++44 (0) ++49 1483 (08331) 757298 104-333 sales@magnetschultz.co.uk VTF@msmsm.com www.magnetschultz.co.uk www.msmsm.com
SOLENOIDS AND SOLUTIONS sales@magnetschultz.co.uk Technical Data G HP E 037 AMX A01 Operating mode S1 (100 %) FM N Rated Voltage UN Rated Current IB Rated Power P20 Ambient temperature Ta 24 V 0.72 A 17.3 W - 20 to + 50 C 80 70 60 50 40 30 Mounting on hydraulic valve with multiple mounting in single operation: minimum size: 46 x 46 x 66 mm on base plate material: iron or material with equal, or better heat derivation respectively. The indicated technical data refer to a power supply from the A.C. mains supply via bridge rectifier. By appropriate measures it is to be ensured that the given maximum values, especially the control current level, are not exceeded. On request the coil winding can be adjusted to other current and resistance values. The magnetic-force values in the diagram refer to 90 % of the rated voltage (UN = 24 V) and in hot condition, according to DIN VDE 0580. For other voltages the magnetic force may deviate. Owing to natural dispersion the magnetic-force values may deviate by + 10 % from the listed values. On request, the armature space can be de-aerated and the pushrod can be adjusted. Mech. modifications of the flange are possible on request. The solenoid interior and armature bearing are resistant to all neutral fluids that are commonly used in hydraulics. 20 10 0 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 s mm Fig. 2: magnetic force / stroke characteristic G HP E 037 AMX A01 Please notice the relevant operating manuals which are delivered with each device. An EC declaration of conformity of the manufacturer is enclosed once. Please be sure that this device ist suitable for your application. We kindly ask to notice the DIN EN 60079-14 for the application. Please contact us if you intend to use other operating media. 2 Data may be changed without The notice edition of dimensions the present pamphlet not guaranteed. cancels the former Subject ones. to our Standard Conditions
sales@magnetschultz.co.uk SOLENOIDS AND SOLUTIONS Magnetic Body (dimensions for your information) disc min. 0.1 jutted out Fig. 3: Coil 924618 (FHMPE037924618) inscription according to LB924617 37 Tube (dimensions for your information) closing torque 12 tp 14 Nm emergency manual override actuation force max. 20 N without pressure energized armature Fig. 4: Tube 923692 (FHTP037923692) Data may be changed without notice dimensions not guaranteed. Subject to our Standard Conditions 3
sales@magnetschultz.co.uk SOLENOIDS AND SOLUTIONS Proportional Solenoid, complete cable + end sleeve DIN 46228 - A 1.5-7 connecting line Li12Y11Y 3 x 1.5 mm² round sealing ring 19 x 2.5 70 Sh-A NBR FHTS923692 FHMSE037924617 fixing nut closing torque 5 +1 Nm fitting socket wrench set SW 26 (12 kt DIN 3124) Wiring diagram Fig. 5: Proportional Solenoid G HP E 037 AMX A01 Data may be changed without notice dimensions not guaranteed. Subject to our Standard Conditions 4
sales@magnetschultz.co.uk SOLENOIDS AND SOLUTIONS Single Components consecutive number quantity description Ident-No. 1 1 magnetic body f. 24 VDC FHMSE924617-001 2 1 tube FHTS037923692 3 1 round sealing ring 19 x 2.5 70 Sh-A NBR 781754 4 1 fixing nut 472793 Fixing Nut Fig. 6: Fixing Nut 472793 suitable socket wrench SW26 (bihex DIN 3124) O-Ring to be used: 19 x 2.5 70 Shore A closing torque 5 +1 Nm Data may be changed without notice dimensions not guaranteed. Subject to our Standard Conditions 5
SOLENOIDS AND SOLUTIONS sales@magnetschultz.co.uk Type code Equipment group Basic construction Modifications Size Arrangement Basic protection Design number G HP E 037 A MX A01 Only available as complete unit! Order Example Type Voltage Operating mode G HP E 037 AMX A01 24 V DC S1 (100% ED) Specials Special designs and modifications are available on request for which full application conditions should be specified in accordance with our -Technical Explanations. Data may be changed without notice Subject dimensions to our standard not guaranteed. conditions. Subject to our Standard Conditions 6 Printed in Germany 0804/04 Ss