20 www.dhollandia.com
1 7 PASSENGER LIFTS Consult the reading help on page 18-19 21
Passenger lift for Multi Passenger vehicles, minibuses and ambulances DH-PH1.03 300 kg The DH-PH1.03 is a single-arm lift, suitable for mounting inside the rear or side doors of a wide range of Multi Passenger Vehicles, minibuses, and ambulance vehicles. In its standard configuration, the DH-PH1 has its travel position just inside the doors of the vehicle. As an option, it can be equipped with an articulated frame [option OWU006], that allows to stow the platform against the side of the body and keeps the access through the vehicle doors completely free. The DH-PH1 can be mounted at the rear doors or at the side door; at the left or right side in the door aperture. Option OWU007 (Cannot be combined with option OWU006) 22 www.dhollandia.com
Step-in model, easy to use and flexible OWU006 in travel position mounted right side OWU006 in work position mounted right side Lift capacity CAP 300 kg Weights [see pg. 19] Standard OWU006 1260 mm 123 kg 139 kg Fitting dimensions larm 600 700 vfh max. 700 950 Technical specifications Lift frame Cylinders Type of ride [see pg. 8-9] Platform details Safety rails Standard platform depths Standard platform widths Std. control unit [see pg. 11] Standard finish of the lift frame 1 lift arm Standard = fixed frame. The closed platform stands in the door aperture Option OWU006 = rotating frame. The platform can be swung out of the way to a travel position against the side of the body Option OWU007 = fixed frame with a 1200 mm foldable platform 1 lift cylinder Flat platform, level ride Reinforced platform in meshed steel Automatic roll-stop at the outboard platform edge Automatic bridge plate and toe-guard at the inboard platform edge 1, folding automatically 1080-1170 - 1260 mm standard 1200 mm for OWU007 Other depths on request [OWP002.L] 820 mm standard / 720 mm optional [OWP002.W] OAE001 Protection PLUS [OAT102] Consult the reading help on page 18-19 23
Passenger lift for Multi Passenger vehicles, minibuses and ambulances DH-PH2.03 350 kg The DH-PH2 is a twin-arms lift, suitable for mounting inside the rear doors of a wide range of Multi Passenger Vehicles, minibuses, and ambulance vehicles. In comparison to the single arm model, the reinforced construction with 2 arms provides excellent platform stability. It increases the safety and the sense of safety of the platform occupant. In standard execution, the DH-PH2 is equipped with a closed platform surface in mesh steel. The horizontally folding platform [option OWU003] offers improved rearward vision to the driver. Thanks to its reduced height, it is perfectly suited to vehicles with reduced roof level. The vertical split platform [option OWU002] offers a much improved rearward vision to the driver, a fast escape route in case of emergency and an easy access to the vehicle interior (e.g. to load and unload luggage). Standard Option OWU002 Option OWU003 24 www.dhollandia.com
Safe, reliable and comfortable lift with 2 lift arms Lift capacity Weights [see pg. 19] Fitting dimensions CAP 350 kg Meshed steel 350 kg 1350 x 820 138 kg 1150 x 820 134 kg 1080 x 820 132 kg larm 700 vfh max. 900 OWU002 OWU003 +10 kg +6 kg Technical specifications Lift frame Cylinders Type of ride [see pg. 8-9] Platform details Safety rails Standard platform depths Standard platform widths Std. control unit [see pg. 11] Standard finish of the lift frame 2 lift arms 2 lift cylinders Flat platform, level ride Reinforced platform in meshed steel Automatic roll-stop at the outboard platform edge Automatic bridge plate and toe-guard at the inboard platform edge 2, left & right, folding automatically 1080-1150 - 1350 mm standard 1150-1350 mm for OWU002 1350 mm for OWU003 Other depths on request [OWP002.L] 820 mm standard / 920 mm optional [OWP002.W] OAE001 Protection PLUS [OAT102] Consult the reading help on page 18-19 25
Passenger lift for Multi Passenger vehicles, minibuses and ambulances DH-PH2.05 500 kg The reinforced twin-arms lift offers 500 kg lift capacity, and fulfills the most demanding requirements of the passenger transport sector. The platform depth can be extended to 1600 mm to load and unload hospital stretchers. The platform width can be increased to 920 mm to suit bariatric applications, both wheelchairs and stretchers. In comparison to the DH-PH2.03, this heavy duty model has a reinforced lifting mechanism, a stronger pump unit, and longer lift arms suitable for floor levels up to 1150 mm above the ground. The bariatric lift is available in 2 executions: a standard full-closure platform; and a vertical split platform [option OWU002]. Standard Option OWU002 26 www.dhollandia.com
Bariatric 500 kg internal passenger lift Lift capacity CAP 500 kg Weights [see pg. 19] Meshed steel 500 kg 1350 x 820 180 kg 1600 x 920 190 kg Fitting dimensions larm 800 vfh max. 1150 OWU002 +15 kg Technical specifications Lift frame Cylinders Type of ride [see pg. 8-9] Platform details Safety rails Standard platform depths Standard platform widths Std. control unit [see pg. 11] Standard finish of the lift frame 2 lift arms 2 lift cylinders Flat platform, level ride Reinforced platform in meshed steel Automatic roll-stop at the outboard platform edge Automatic bridge plate and toe-guard at the inboard platform edge 2, left & right, folding automatically 1350-1600 mm Other depths on request [OWP002.L] 820 mm standard / 920 mm optional [OWP002.W] OAE001 Protection PLUS [OAT102] Consult the reading help on page 18-19 27
Passenger lift for Multi Passenger vehicles, minibuses and ambulances Side mounted 28 www.dhollandia.com
DH-PH1 and DH-PH2 in side-mounted position Depending on vehicle dimensions and width of the door aperture, the DH-PH1.03, DH-PH2.03 and DH-PH2.05 are also available for side mounting. Ask advice from the local DHOLLANDIA distributor to check compatibility between the vehicle, the dimensions of the side door, and the wheelchair lift. Consult the reading help on page 18-19 29
Passenger lift for minibuses and ambulances DH-LSPH.05 500 kg The DH-LSPH responds to the growing demand for more robust passenger lifts with higher capacity and increased platform surface. The platform in galvanised mesh steel evacuates rain, snow and mud quickly through the surface and offers excellent anti-slip protection. The automatic roll-stop is mounted at the outboard platform edge and allows full usage of the platform depth. Safety rails, foot controls and platform lights are available as an option. Adapted bolt-on mounting plates are available for most types of minibuses, to enable quick and easy fitting. Lift capacity Weights [see pg. 19] CAP 500 kg Meshed steel 1500 mm 190 kg 30 www.dhollandia.com
Heavy duty lift for taxis and ambulances Mounting plates per brand & wheel base Fitting dimensions See DH-LSP.07.04 on page 60 Option OAP208.LR Technical specifications Lift frame Cylinders Type of ride [see pg. 8-9] Platform construction Safety rails Standard platform depths Standard platform widths Std. control unit [see pg. 10] Standard finish of the lift frame 100 x 80 mm 2 lift cylinders + 1 tilt cylinder Wedged platform. Level ride + automatic tilt at ground level Meshed steel platform, in hot-dip zinc-plated finish Automatic roll-stops 100 mm high Option OAP208.LR: 2 rails, left & right, folding manually Steel : 1500 mm Other depths on request [OAP302.S] 1300 mm Other widths on request [OAP303] OAE031.Z Protection PLUS [OAT102] Special mounting brackets are available for: Citroën Jumper / Relay Fiat Ducato Ford Transit FWD / Jumbo / Tourneo Custom MAN TGE Mercedes Sprinter / Vito Peugeot Boxer Renault Master FWD / Trafic Opel Movano FWD / Vivaro Volkswagen Crafter / Transporter Nissan NV400 / Primastar LDV V80 Consult the reading help on page 18-19 31
Passenger lift for minibuses, midibuses, coaches and ambulances DH-VZH.03 300 kg The interior column lift DH-VZH is designed to suit a wide range of Multi Passenger Vehicles, minibuses, coaches, trains, In its travel position, the platform is stowed against the side panel of the vehicle. Upon use, the lift frame is turned to a work position outside the vehicle. Then the platform is opened and the safety rail and bridge plate are deployed, all by hand. The hydraulic lift functions are operated by means of 2 buttons integrated in the lift column. The standard platform is made of 1 single section. Foldable platforms [option OAP805] are available for vehicles with insufficient door aperture, or in order to increase the overall useful platform surface. Lift capacity Weights [see pg. 19] CAP Meshed steel 300 kg 860x1200 mm 155 kg 32 www.dhollandia.com
Column lift with free access through the doors DH-VZH1 DH-VZH2 Fitting dimensions Stroke S 750 1150 (*) 1550 (*) vfh max. 700 1100 1500 H 1165 1565 1965 (*) option OWF012 Technical specifications Lift frame Cylinders Type of ride [see pg. 8-9] Platform details Safety rails Standard platform dimensions Standard control unit Standard finish of the lift frame Column lift with single pillar VZH1: frame with 1 articulation point. In work position the platform stands right behind the body VZH2: frame with 2 articulation points. The platform can pivot towards the pavement 1 lift cylinder Flat platform, level ride Platform in meshed steel VZH1: hinged bridge plate at the inboard platform edge VZH2: platform in 1 single section Mechanical roll-stop at the point 1, folding manually 860x1200 mm Other dimensions [OAP804] & foldable platforms [OAP805] available on request 2-button control integrated in the lift column Protection PLUS [OAT102] Consult the reading help on page 18-19 33
Passenger lift for ambulances Ambulance lifts 500-1000 kg 34 www.dhollandia.com
Flexible solutions to suit special customer requirements DHOLLANDIA is a lift manufacturer in the true sense of the word: more than 90% of the components used on our lifts, are manufactured and assembled in-house. Our powerful production apparatus and our premium flexibility enables us to develop and offer creative client-orientated solutions. DHOLLANDIA s product portfolio contains a wide variety of realisations for the handling of wheelchairs, hospital beds, stretchers, bariatric stretchers etc These ambulance lifts are available as full-width platform, halfwidth platform, full-width platform with a folding section to leave the access through one door free, with (telescopic) safety rails, special roll-stop designs etc Upon realisation of each project, the focus on customer requirements takes a central position. Consult the reading help on page 18-19 35
Passenger lift for Multi Passenger Vehicles, mini and midi buses and ambulances DH-CH001.03 300 kg The platform of the DH-CH001.03 stows neatly in a sealed cassette box under the chassis of a wide range of M1 - M2 minibuses. This solution keeps the access through the rear doors free and occupies no space inside the vehicle. The lifts slides in and out hydraulically. The foldable platform section, the bridge plate and safety rails are deployed by hand. Its slim platform (only 20 mm thick) enables wheelchair passengers to embark and disembark with minimal effort. The cassette is equipped with a full width aluminium step with anti-slip profiling, helping operators to step in and out of the vehicle safely. Lift capacity Weights [see pg. 19] CAP 300 kg 1260x800 mm Alu / Alu 162 kg 36 www.dhollandia.com
Short cassette lift with foldable platform Fitting dimensions larm 700 vfh max. 875 mfu max. 525 mfu min. 335 mug max. 350 lch 145 lcl 1115 Technical specifications Lift frame Cylinders Retraction in / out Type of ride [see pg. 8-9] Platform details Safety rails Standard platform dimensions Standard control unit Standard finish of the lift frame 2 lift arms 2 lift cylinders + 2 fixed stabilisers Hydromotor + gear wheel system Flat platform, level ride Steel frame + alu infill profiles Manually foldable platform Automatic roll-stop at the outboard platform edge Bridge plate and toe-guard at the inboard platform edge 2, left & right, folding manually 1260 x 800 mm 3-button remote control with spiral cable KTL epoxy e-coating Consult the reading help on page 18-19 37
Passenger lift for midibuses & coaches DH-CH003.03 350 kg The DH-CH003.03 is a short cassette lift, designed for installation at the side or at the rear door of M2-M3 buses and school buses. The lift and its platform slide in and out of the cassette by means of an electric motor. The platform is extended manually with minimal effort. This lift is available in various executions with different lift geometry, suitable for installation under the chassis, integrated in the vehicle floor, at the first step of the access stairs or in the luggage compartment. It offers maximum versatility up to a floor level of max. 1350 mm. 38 www.dhollandia.com
Short cassette lift with extensible platform Weights [see pg. 19] Steel / Alu CH003 210 kg CH003.03 tek.pdf 1 29/11/17 11:06 Fitting dimensions Type larm CAP kg mug max. lch lcl mfu min. mfu max. vfh max. CH003.03.03 850 350 550 130 1550 300 710 1260 CH003.03.04 V1 950 350 680 130 1500 180 350 1030 CH003.03.04 V2 950 350 550 130 1500 180 480 1030 CH003.03.05 1100 350 800 130 1800 180 550 1350 Technical specifications Lift frame Cylinders Retraction in / out Type of ride [see pg. 8-9] Standard platform dimensions Platform details Safety rails Std. control unit Standard finish of the lift frame 2 lift arms 2 lift cylinders Electric motor + gear wheel system Flat platform, level ride 1200 x 800 mm (LxW) Aluminium platform with anti-slip surface Platform is manually extensible to 1200 mm (or 1300 mm for CH003.03.05) Automatic roll-stop at the outboard platform edge Automatic bridge plate to the vehicle floor 2, left & right, folding manually OWE008.2 KTL epoxy e-coating Consult the reading help on page 18-19 39
Passenger lift for midibuses & coaches DH-CH101.05 350-500 kg The DH-CH101.03 and.05 are designed for installation on M3 buses and coaches, in a compartment high above ground level, for instance above the rear axle. The standard execution is equipped with a solid single-piece platform of 1200 mm long, perfectly suited to regular wheelchairs. A manually extensible platform is available as an option [OWP014.1]. This execution allows the operator to extend the platform from 1450 to 1750 mm platform depth, to load and unload longer wheelchairs, hospital beds, or stretchers. The strong lift arms offer excellent platform stability to the wheelchair occupant through the full working range of the lift. 40 www.dhollandia.com
Cassette lift with maximum travel downwards Weights [see pg. 19] Steel / Alu CH101 310-340 kg CH101.03 tek.pdf 1 29/11/17 11:08 Fitting dimensions Type larm CAP kg mug max. lch lcl mfu min. mfu max. vfh max. CH101.03.03 1700 350 1280 200 2250 280 620 1900 CH101.03.04 1800 350 1350 200 2350 300 650 2000 CH101.05.03 1700 500 1280 200 2250 280 620 1900 CH101.05.04 1800 500 1350 200 2350 300 650 2000 CH101.05.05 1700 350 / 500 1280 200 2350 280 620 1900 Technical specifications Lift frame Cylinders Retraction in / out Type of ride [see pg. 8-9] Standard platform dimensions Platform details Safety rails Std. control unit Standard finish of the lift frame 2 lift arms 2 lift cylinders Electric motor + gear wheel system Flat platform, level ride 1200 x 800 mm (LxW) Aluminium platform with anti-slip surface Solid single-piece platform Automatic roll-stop at the outboard platform edge Automatic bridge plate to the vehicle floor Platform manually extensible to 1750 mm available as option [OWP014.1] 2, left & right, folding manually OWE008.2 KTL epoxy e-coating Consult the reading help on page 18-19 41
Passenger lift for midibuses & coaches DH-CH102.03 350 kg The cassette lifts DH-CH102.03 are usually integrated in the lowest step of the stairs at the middle door(s) of M3 buses and coaches. Like the other lifts of the DH-CH100 series, this lift is equipped with a single-piece platform to eliminate as many moving parts as possible and reduce maintenance needs. The DH-CH102.03 offers excellent platform stability, and guarantees superior reliability in service. 42 www.dhollandia.com
Cassette lift integrated in the stair Weights [see pg. 19] Steel / Alu CH102 235 kg + CH102.03 tek.pdf 1 29/11/17 11:11 Fitting dimensions Type larm CAP kg mug max. lch lcl mfu min. mfu max. vfh max. CH102.03.04 800 350 500 150 1970 200 710 1210 CH102.03.05 1100 350 700 150 1970 270 970 1670 Technical specifications Lift frame Cylinders Retraction in / out Type of ride [see pg. 8-9] Standard platform dimensions Platform details Safety rails Std. control unit Standard finish of the lift frame 2 lift arms 2 lift cylinders Electric motor + gear wheel system Flat platform, level ride 1200 x 800 mm (LxW) Aluminium platform with anti-slip surface Solid single-piece platform Automatic roll-stop at the outboard platform edge Automatic bridge plate to the vehicle floor 2, left & right, folding manually OWE008.2 KTL epoxy e-coating Consult the reading help on page 18-19 43
Passenger lift for midibuses & coaches DH-CH103.05 350-500 kg The DH-CH103 are heavier-duty cassette lifts up to max. 500 kg lift capacity, usually mounted in the luggage compartment, or integrated in the stairs at the middle or front door(s) of M3 buses and coaches. This lift is equipped with a single-piece platform to eliminate as many moving parts as possible and reduce maintenance needs. The DH-CH103 offers excellent platform stability and guarantees superior reliability in service. 44 www.dhollandia.com
Cassette lift mounted in luggage compartment or in stairs Weights [see pg. 19] Steel / Alu CH103 270 kg CH103.04 tek.pdf 1 29/11/17 11:12 Fitting dimensions Type larm CAP kg mug max. lch lcl mfu min. mfu max. vfh max. CH103.04.02 1100 450 535 200 2000 485 940 1475 CH103.03.02 1300 350 640 200 2200 590 1160 1800 CH103.05.02 1280 500 620 200 2000 610 1150 1770 Technical specifications Lift frame Cylinders Retraction in / out Type of ride [see pg. 8-9] Standard platform dimensions Platform details Safety rails Std. control unit Standard finish of the lift frame 2 lift arms 2 lift cylinders Electric motor + gear wheel system Flat platform, level ride 1200 x 800 mm (LxW) Aluminium platform with anti-slip surface Solid single-piece platform Automatic roll-stop at the outboard platform edge Automatic bridge plate to the vehicle floor 2, left & right, folding manually OWE008.2 KTL epoxy e-coating Consult the reading help on page 18-19 45
Passenger lift for coaches DH-RB.05 500 kg The DH-RB.05 is a powerful fold-away lift, designed to embark and disembark the heaviest wheelchairs on or from coaches in a safe manner. In its travel position, this lift is neatly folded away in the area below the dedicated door on the upper aisle of the coach. Upon deployment, the platform is first lowered to the ground, then unfolded manually into work position. 46 www.dhollandia.com
Powerful fold-away lift for the heaviest wheelchairs Lift capacity CAP 500 kg Weights [see pg. 19] Alu / Alu 1280 mm 175 kg + Fitting dimensions larm 760 820 880 940 1000 vfh max. 1435 1535 1620 1720 1815 mfc max. mcg max. on request - ask for study drawing on request - ask for study drawing lof (platform) ± 930 Technical specifications Lift frame Cylinders Type of ride [see pg. 8-9] Platform details Safety rails Standard platform dimensions Lift arm lengths Std. control unit Standard finish of the lift frame Base plate to be bolted to the vehicle chassis 1 central lift cylinder for max. platform stability 2 fixed stabilisers for the platform orientation Wedged platform. Level ride + automatic tilt at ground level Aluminium platform with anti-slip surface Manual unfolding of the platform and its point Automatic roll-stop at the outboard platform edge Automatic roll-stop at the inboard platform edge as an option [OWP011] 2, left & right, folding manually 1280 x 800 mm (LxW) Other dimensions on request 760-820 - 880-940 - 1000 mm OWE005.2 Protection PLUS [OAT102] Consult the reading help on page 18-19 47
Passenger lift for midibuses, urban buses DH-TV.03 300 kg The DH-TV.03 is specially designed for city buses. It is mounted at the side door of the bus, and occupies the space that is otherwise occupied by the access stairs. At rest, it functions as stair for pedestrians to step in and out the bus. When deployed, the system is automatically transformed into a lift platform to assist wheelchair occupants to embark or disembark the vehicle. The DH-TV is available in 4 executions: the STANDARD execution with automatic deployment of the lift platform; the MICRO execution with automatic deployment of the lift platform; the MANUAL execution whereby the extension part of the platform is pulled out, and pushed back in by hand. the 3-STEP execution with automatic deployment of the lift platform. Lift capacity Weights [see pg. 19] CAP 300 kg Steel construction Standard 185 kg Micro 155 kg 3-Step 189 kg Manual 155 kg 48 www.dhollandia.com
From stair to lift platform in just 5 seconds TV.03 tek.pdf 1 29/11/17 12:04 Fitting dimensions Type Standard Micro Manual 3-Step vfh max. 1185 1025 985 1345 D1 730 630 580 740 V1 1135 1135 1135 1295 V2 1735 1575 1575 1975 lcwo 1050 1050 1110 1050 lcwi 858 858 918 858 Technical specifications Lift frame Cylinders Working principle Type of ride [see pg. 8-9] Safety rails Standard platform dimensions Standard control unit Standard finish of the lift frame 2 lift columns in light-weight aluminium 2 lift cylinders with direct action on the lift system; no cables, chains or belts Upper step articulates from horizontal to vertical position when the platform is deployed Lower step incorporates a sliding platform, enabling to extend from a step to a wheelchair lift platform On Standard, Micro and 3-step models, the extension of the platform is automatic. On the Manual model, the extension part of the platform is manipulated by hand Automatic roll-stop at the rear edge of the platform Flat platform, level ride 2, fixed to the lift columns 1000 x 800 mm (*) Other dimensions on request. Control unit integrated in power pack Columns in aluminium. Steel components in Protection PLUS [OAT102] (*) Consult DHOLLANDIA re. CE conformity of the platform dimensions. Consult the reading help on page 18-19 49
Access ramps lift for low-floor trams and buses DH-BRMU.03 300 kg The access ramps DH-BRM are designed to assist wheelchair passengers, parents with a baby buggy, or passengers with an otherwise impaired mobility to enter or exit the bus safely and comfortably. The DH-BRMU.03 is designed for installation under the vehicle floor of the bus, and for retrofitting. In order to minimize the number of vulnerable parts and to maximize the operational reliability, the platform retraction is operated manually. Electric ramps, driven by an electric motor plus chain system, are available upon special request. These can be equipped with stateof-the-art safety devices, such as: safety carpet, sensitive safety edge with emergency stop, etc 50 www.dhollandia.com
Retractable access ramps for low-floor buses DH-BRMU.03 For installation under the vehicle floor and retrofit Technical specifications DH-BRMU.03 Cassette dimensions 1420 x 1190 x 50 mm (L x W x H) Platform dimensions 1090 x 1040 mm (L x W) Other dimensions available on request Capacity Platform construction Retraction IN / OUT Mounting position Weight indication 300 kg Light weight aluminium platform with anti-slip surface Manual Mounted under the vehicle floor Adapted for floor thickness between 45-55 mm 60 kg Consult the reading help on page 18-19 51