www.motiontech.com.au

Precision Linear Motion Products Cataog and Design Guide How to Use This Guide Haydon Kerk Motion Soutions, Inc. speciaizes in customized designs to sove compex engineering probems requiring precision inear motion. Before using this guide, take a few minutes to review the tabe of contents and scan through the entire cataog. Lead-screws and Nut Assembies (Page 11) The ead-screw product ine offers an extensive array of non-ba ead-screws, anti-backash nuts, and free-wheeing nuts for use as components in a motion system. Our precision ead-screws and nuts that easiy interface to many types of rotary power sources incuding stepper motors, servos, brushess DC, brush-type DC, and AC synchronous motors. Lead-screws and nuts are aso versatie components in systems requiring combination mechanics such as bet, puey, ead-screw systems, and foded-over inear actuator designs. Lead-Screws (charts on pages 20 to 24) screw diameter: 2 mm to 24 mm (5/64-in to 15/16-in) Leads (trave/revoution): 0.3 mm to 76 mm (0.012-in to 3-in)/revoution Nut Styes (product summary and charts on pages 25 to 27) 8 designs of anti-backash and freewheeing nuts as a function of oad and maximum aowabe drag torque. PAGE 11 Linear Actuator Stepper Motors (Page 50) The stepper inear actuator product ine offers an effective soution that simpifies the conventiona way of transating rotary into inear motion. The rotary-to-inear conversion is unique; it takes pace within the motor itsef therefore eiminating the use of bets and pueys, rack and pinion and other mechanica components. Hybrid Linear Actuators (Overview on page 69) Footprint: 21 mm to 87 mm (0.8-in to 3.4-in) square Force Output: 2 N to 2200 N (0.5 b to 500 b) Linear Trave/step: 1.5 to 127 microns/step (0.00006-in to 0.005-in)/step Can-Stack Linear Actuators (Overview on page 127) Footprint: 15 mm to 46 mm (0.59-in to 1.8-in) diameter Force Output: 7 N to 260 N (1.6 b to 58 b) Linear Trave/step: 20 to 400 microns/step (0.0008-in to 0.016-in)/step PAGE 50 Rotary Stepper Motors (Page 171) Haydon Kerk rotary motors are buit to provide exceptionay high torque to size ratios. Utiizing a patented enarged rotor with ow inductance cois, the motors provide superior torque and continuous, reiabe high performance. Optiona rare earth magnets may be specified for even higher torque. Bronze seeve bearings are standard, ba bearings are aso avaiabe. Footprint: 20 mm to 46 mm (0.79-in to 1.8-in) diameter Hoding Torque: 0.46 N-cm to 11.3 N-cm (0.65 oz-in to 16 oz-in) PAGE 171 Eectronic Controer Drives (Page 194) The IDEA famiy of programmabe Stepper Motor Controers uses an intuitive patent-pending Graphic User Interface (GUI) which greaty simpifies set up and use. Units are avaiabe in either USB or RS-485 communication. Haydon Kerk aso offers a range of Stepper Motor Non-Programmabe Drives controed with Step, Direction & Enabe Commands. These microstepping chopper drives provide a simpe soution for production voumes. PAGE 194 Motorized and Non-Motorized Linear Rais and Sides (Page 202) The inear rais and sides product ine shoud be considered when a more extensive inear motion soution is desired to minimize overa system materia cost, engineering time, and assemby cost. The inear rais and sides are compete mechanica systems that can be powered and motorized to incude a inear bearing, rotary bearings, mechanica frame, precision screw and nut, and an eectronic drive unit. We can aso design, engineer and manufacture a mutipe-axis configuration specific to your appication requirements. Trave distances (stroke engths): Up to 90-in (229 cm) PAGE 202 ScrewRais, Spine Shafts and Guide Rais (Page 247) Kerk ScrewRai combines both functions in a singe, coaxia component. The design saves as much as 80% of the space used by a two-rai system. Kerk Spine Shafts provide anti-rotation for one axis motion or a drive mechanism with rotation for two axes of motion. 1 PAGE 247

Contact Information Contact Information Haydon Kerk Motion Soutions, Inc. www.haydonkerkpittman.com North American HQ/Operations Haydon Kerk Motion Soutions, Inc. Haydon Products Division 1500 Meriden Road Waterbury, CT 06705 USA Teephone: + 1 203 756 7441 info.haydonkerk@ametek.com Haydon Kerk Motion Soutions, Inc. Kerk Products Division 59 Meadowbrook Drive Miford, NH 03055 USA Teephone: + 1 603 213 6290 info.haydonkerk@ametek.com Asia Operations Haydon Linear Motors Co., Ltd. Xianong Industria Park No. 110, Lane 4, Xinyuan Road New District, Changzhou, China 213031 Teephone: + 86 519 85113316 / 85113312 Saes: + 86 519 85123096 / 85139199 info.haydonkerk@ametek.com.cn India Operations AMETEK Instruments India Pvt. Ltd. Haydon Kerk and Pittman Motor Saes 148 Prestige Featherite Tech Park EPIP Phase II, Whitefied Bangaore - 560 066, India + 91 080 67823237 (Teephone) + 91 9686679509 (Mobie) www.haydonkerkpittman.com dinesh.dhananjayan@ametek.com Europe Operations Haydon Kerk Motion Soutions / France 57 rue des Vignerons 44220 Coueron - France Teephone: + 33 2 40 92 87 51 info-europe.haydonkerk@ametek.com Haydon Kerk Motion Soutions / Germany Schmiedstr. 2 91207 Lauf a.d. Pegnitz - Germany Teephone: + 49 9123 96 282 12 www.haydonkerk.de info-europe.haydonkerk@ametek.com Haydon Kerk Motion Soutions, Inc. A rights reserved. This cataog was produced for excusive use by customers of Haydon Kerk Motion Soutions, Inc, a division of AMETEK, Inc. No part of this book or technica information can be used, reproduced or atered in any form without approva or proper authorization from Haydon Kerk Motion Soutions, Inc., AMETEK, Inc., and its goba affiiates. This cataog is intended to be a guide for products and services offered by Haydon Kerk Motion Soutions, Inc. Despite taking a precautions to avoid technica or typographica errors within the cataog some errors may exist. Because most of our products invove a high degree of accuracy and precision we strongy recommend that you contact a Haydon Kerk Motion Soutions technica advisor for more detais and specific appication requirements. APR 2018 2

Tabe of Contents AC Synchronous Actuators AC Synchronous Hybrid Actuators............................ AC Synchronous Can-Stack Actuators....................... AC Synchronous Rotary Actuators............................ Stepper Motor Drives IDEA Programmabe Drives PCM4806E / PCM4826E..................................... ACM4806E / ACM4826E..................................... DCM4826X Puse/Direction/Enabe Drive...................... DCM8027 & DCM8054 Micro-Stepping Drives................ DCS4020 Bipoar Chopper Drive.............................. 44103 Whisper Drive......................................... 189 190 192 194 194 197 198 199 200 Motorized and Non-Motorized Linear Rais and Sides Product Overview................................................. Linear Rai Appication Checkist............................. BGS Series Linear Rais Overview......................................................... Seector Chart.................................................... Motorized BGS04 28000 Series (Size 11) Hybrid Doube Stack...................... 43000 Series (Size 17) Hybrid Singe Stack....................... 43000 Series (Size 17) Hybrid with IDEA Drive.................... Motorized BGS06 43000 Series (Size 17) Hybrid Singe/Doube Stack................ 43000 Series (Size 17) Hybrid with IDEA Drive.................... Motorized BGS08 57000 Series (Size 23) Hybrid Singe/Doube Stack................. 202 203 206 206 207 207 207 209 209 211 RGS Series Linear Rais Overview......................................................... Seector Chart.................................................... Motorized RGS04 28000 Series (Size 11) Hybrid Doube Stack...................... 43000 Series (Size 17) Hybrid Singe/Doube Stack and IDEA Drive.. Non-Motorized RGS04 Without motor, with guide screw - or - without guide screw.......... Motorized RGS06 and RGW06 (Wide base with Guide Tracks) 43000 Series (Size 17) Hybrid Singe/Doube Stack................ 43000 Series (Size 17) Hybrid Singe/Doube Stack with IDEA Drive. 57000 Series (Size 23) Hybrid Singe/Doube Stack................ Non-Motorized RGS06 and RGW06 Without motor, with guide screw - or - without guide screw.......... 213 214 215 216 218 220 222 223 225 6

Tabe of Contents RGS Series Linear Rais Motorized RGS08 and RGW08 57000 Series (Size 23) Hybrid Singe/Doube Stack.................. 229 Non-Motorized RGS08 and RGW08 Without motor, with guide screw.................................. 230 Motorized RGS10 and RGW10 57000 Series (Size 23) Hybrid Singe/Doube Stack.................. 232 Non-Motorized RGS10 and RGW10 Without motor, with guide screw - or - without guide screw........... 234 WGS Linear Rai Systems Motorized WGS06 43000 Series (Size 17) Hybrid Singe/Doube Stack.................. 238 43000 Series (Size 17) Hybrid Singe/Doube Stack with IDEA Drive... 238 57000 Series (Size 23) Hybrid Singe/Doube Stack.................. 240 Non-Motorized WGS06 Without motor, with guide screw................................... 241 LRS Linear Rai Systems Motorized LRS 43000 Series (Size 17) Hybrid Singe/Doube Stack (IDEA Drive option) 244 Non-Motorized LRS Without motor, with guide screw - or - without guide screw............ 244 ScrewRai Linear Actuators Overview.......................................................... 247 SRA Series: Genera Purpose.................................. 249 SRZ Series: Anti-Backash..................................... 250 End Supports.................................................... 251 SRA Seector Chart............................................. 252 SRZ Seector Chart............................................. 253 Spine Shafts, Rais and Bushings, Guides Spine Shafts..................................................... 254 Rais and Bushings.......................................... 256 Linear Rai Checkist Linear Rai Appication Checkist Form............................. 260 7

Who We Are Recognized as a eader in motor miniaturization, Haydon Products Division has been buiding eectric motors and stepper motor based inear actuators for amost haf a century. The company s manufacturing faciity, ocated on ten acres in the heart of Connecticut, supports today s most efficient technoogy and manufacturing methods and is ISO 9001 certified. Kerk Products Division was estabished in 1976 and has grown to be one of the word s argest excusive manufacturers of non-ba ead-screws, inear rais, and actuator systems. Our internationay accaimed anti-backash designs and materias provide high accuracy, unsurpassed repeatabiity, and ong ife in a fu range of motion contro appications. Haydon Kerk Motion Soutions is headquartered in Waterbury, CT, with additiona manufacturing operations in Miford, NH, and Changzhou, China. Haydon Kerk aso has faciities in Germany and a technica center in Coueron, France. Haydon Kerk Motion Soutions inear motion products are used in much of today s sophisticated medica equipment, aboratory instrumentation, machinery automation, aerospace, anaytica equipment, computer peripheras, semiconductor industries, and other appications that require precision motion. Whether an appication requires a standard item, custom design, new product, or a more sophisticated compete assemby, Haydon Kerk Motion Soutions experienced engineering team wi assist you. MEDICAL ANALYTICAL AND SURGICAL EQUIPMENT INDUSTRIAL AUTOMATION AMETEK is a goba eader in eectronic instruments and eectromechanica devices with coeagues at numerous manufacturing, saes and service ocations in the US and in many other countries around the word. AMETEK consists of 2 operating groups: Eectronic Instruments and Eectromechanica. Eectronic Instruments is a eader in advanced instruments for the process, aerospace, power, and industria markets. Eectromechanica is a differentiated suppier of eectrica interconnects, speciaty metas, and technica motors and associated systems, as we as a eader in foor care and speciaty motors. SEMICONDUCTOR FABRICATION BOTTLING AND FOOD PROCESSING EQUIPMENT We take pride in our expertise in customizing products for specific appication needs. 8

Custom System Soutions We offer high precision motion systems at any eve of sophistication and integration, providing a necessary mechanica, eectrica and software suppy and support. Singe-axis and mutipe-axis systems are our expertise, either using our own components or custom designed to our cients specifications. We are abe to configure motion systems utiizing our own component eve suppy. Cients reaize singesource suppier efficiency and fuy tested soutions through our extensive in-house resources... Mechanica, eectrica and software engineering teams Fu inspection and testing capabiities (incudes interferometry, vision inspection, environmenta, vibration and noise testing). A operations are ISO Certified and RoHS Compiant. Proprietary and patented products and processes that incude ow friction coatings, in-house deveoped poymers. Extensive manufacturing capabiities incuding in-house too design and fabrication, injection moding, EDM, 3D printing, coating and cabing. Custom motor designs such as axia fux motors. Linear Mechanics with virtuay unimited assemby options. We have singe and muti-axis soutions as we as Z-theta. Drives & Eectronics, integrated or stand-aone stepper drives, as we as software and servo drives. Deveopment And Design Engineers Our experience starts with the design of the basic components and expands into the integration of these components for the right soution to your motion needs. Experts in medica device and surgica too appications Meeting requirements of FDA, Quaification, Documentation Compete range of ab test OEM options Speciaized industria appication capabiity Manufacturing Professionas Because we manufacture at the component eve it aows us to responsiby fuy evauate a aspects of a tested system. Designed for manufacturabiity, repeatabiity and reproducibiity Custom testing to mimic appication Ongoing technica support after deveopment cyce OEM Purchasing and Business Managers A singe source for a compete system to simpify your vendor base and reduce inventory costs. We can hep decrease unnecessary abor and materias that can bring production cost savings. Engineering / Deveopment Managers Ever increasing efficiency demands can make new projects difficut to finish on budget and on time. If your team is acking expertise in a certain area of motion contro, we have the experienced engineers to hep fi the voids. Receive individua attention from the singe point contact of a sma, focused and strategicay aigned group, backed by the resources and support of a goba corporation. 9

Motorized and Non-motorized BGS,TM RGS, WGS,TM and LRS TM Linear Rais and Linear Sides 214

Motorized and Non-Motorized Linear Rais Motorized and Non-Motorized Linear Rais from Haydon Kerk Motion Soutions... Integrated technoogies that provide high precision and accuracy in motion contro WGS Motorized with IDEA Drive BGS Motorized with IDEA Drive RGS Motorized with IDEA Drive LRS Motorized with IDEA Drive WGS Non-Motorized RGS Non-Motorized LINEAR RAIL TECHNOLOGY The motorized and non-motorized inear rais combine many technoogies into a singe integrated, inear motion contro system. Haydon Kerk Motion Soutions inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude engineered poymers that provide a strong, stabe patform for a variety of inear motion appications. When integrated with an IDEA Drive, the system combines Haydon hybrid inear actuator technoogy with a fuy programmabe, integrated stepper motor drive. By combining technoogies into a singe preasssembed unit, Haydon Kerk Motion Soutions is abe to improve system integration for the equipment OEM or end user. The overa cost for the customer is aso owered by offering a compete soution as it eiminates the need for rotary-to-inear conversion, as we as simpifies product deveopment with fewer components required. BGS products are designed to position heavy oads and maintain repeatabiity and accuracy whie withstanding significant cantievered oading. A Back Ice TFE coated ead-screw drives a precision nut embedded in a machined auminum carriage mounted to a stainess-stee ba rai. The resut is a smooth operating, yet rigid inear motion system. Maximum stroke engths: BGS04 18 in. (460 mm); BGS06 24 in. (610 mm); BGS08 30 in. (760 mm). The RGS Linear Rai is a screw driven rai system that offers exceptiona inear speed, torsiona stiffness and stabiity, accurate positioning, and ong ife in a compact, vaue-priced assemby. The integra mounting base aows support over the entire ength if desired. The ength and speed of the RGS is not imited by critica screw speed, aowing high RPM and inear speeds, even over ong spans. Lengths up to 8 feet (2.4 meters) can readiy be buit, and onger engths are possibe on a specia order basis. RGS inear rais come standard with a wear-compensating, anti-backash driven carriage. Additiona driven or passive carriages can be added, aong with appication specific customization. Linear guides, without the drive screw, are aso avaiabe. WGS Linear Rais feature a more compact profie and improved torsiona stiffness and stabiity. Made of the same quaity components used in the RGS series. The integra mounting base can provide support over the entire ength that can extend up to 8 feet (2.4 meters). Longer engths are possibe on a specia order basis. The WGS utiizes siding pane bearings on a ow-profie auminum guide rai that keeps the motion smooth throughout the trave distance. The ead-screw is precision made of high-quaity stainess stee roed on-site at a Haydon Kerk manufacturing faciity. LRS Linear Rai Systems use a precision ead-screw assemby mechanism to provide controed positioning aong the axis of a robust auminum inear side. The carriage is a sma patform with siding eement inear bearings that gide within this speciay configured extrusion. The ead-screw used in the system is provided with various eads and shaft end configurations that accommodate virtuay any source of rotary power. When integrated with Haydon Kerk Stepper Motors and eectronic drives the various inear rai systems offer virtuay imitess inear motion contro possibiities from high-efficiency industria automation systems to extremey precise anaytica and diagnostic equipment systems used by the medica industry. More importanty, every Haydon Kerk inear rai product is supported by an experienced technica team recognized for innovation, customization, and dedicated customer service. 202

Linear Rai Appication Checkist Information needed to propery size a inear rai system Haydon Kerk Linear Rai Systems are designed to be precision motion devices. Many variabes must be considered before appying a particuar rai system in an appication. The foowing is a basic checkist of information needed that wi make it easier for the Haydon Kerk engineering team to assist you in choosing the proper inear rai. See order form on ast page of this cataog. Linear Rai Appication Checkist 1) o Maximum Load? (N or bs.) 2) o Load Center of Gravity (cg) Distance and Height (mm or es)? See iustrations (A) (B) (C) beow. Dimensions (o mm / o ): o (A)... OR... o (B) AND... o (C) (B) (A) (C) LINEAR RAIL TECHNOLOGY CHECKLIST 3) o Rai Mount Orientation? The force needed to move the oad is dependent on the orientation of the oad reative to the force of gravity. For exampe, tota required force in the horizonta pane (D) is a function of friction and the force needed for oad acceeration (F f + F a ). Tota force in the vertica pane is a function of friction, oad acceeration, and gravity (F f + F a + F g ). Orientation: o (D) o (E) o (F) o (G) o (H) 203

Linear Rai Appication Checkist Linear Rai Appication Checkist (Continued) 4) o Stroke Length to Move Load? (mm or es) Overa rai size wi be a function of stroke ength needed to move the oad, the rai frame size (oad capabiity), the motor size, and whether or not an integrated stepper motor programmabe drive system is added. 5) o Move Profie? A trapezoida move profie divided into 3 equa segments (J) is a common move profie and easy to work with. Another common move profie is a trianguar profie divided into 2 equa segments (K). (J) LINEAR RAIL TECHNOLOGY CHECKLIST (K) If using a trapezoida (J) or trianguar (K) move profie, the foowing is needed a) o Point to point move distance (mm or es) b) o Move time (seconds) incuding time of acceeration and deceeration c) o Dwe time between moves (seconds) The trapezoida move profie (J) is a good starting point in heping to size a system for prototype work. A compex move profie (L) requires more information. a) o Time (in seconds) incuding: T 1, T 2, T 3, T 4, T 5 T n and T dwe b) o Acceeration / Deceeration (mm/sec. 2 or es/sec. 2 ) incuding: A 1, A 2, A 3 A n For more information ca Haydon Kerk Motion Soutions Engineering at 203 756 7441. (L) 204

Linear Rai Appication Checkist Linear Rai Appication Checkist (Continued) 6) o Position Accuracy Required? (mm or es) Accuracy is defined as the difference between the theoretica position and actua position capabiity of the system. Due to manufacturing toerances in components, actua trave wi be sighty different than theoretica commanded position. See figure (M) beow. 7) o Position Repeatabiity Required? (mm or es) Repeatabiity is defined as the range of positions attained when the rai is commanded to approach the same position mutipe times under identica conditions. See figure (M) beow. (M) 8) o Positioning Resoution Required? (mm/step or es/step) Positioning resoution is the smaest move command that the system can generate. The resoution is a function of many factors incuding the drive eectronics, ead-screw pitch, and encoder (if required). The terms resoution and accuracy shoud never be used interchangeaby. 9) o Cosed-Loop Position Correction Required? o YES o NO In stepper motor-based inear rai systems, position correction is typicay accompished using a rotary incrementa encoder (either optica or magnetic). 10) o Life Requirement? (seect the most important appication parameter) a) o Tota mm or es... or... b) o Number of Fu Strokes... or... c) o Number of Cyces LINEAR RAIL TECHNOLOGY CHECKLIST 11) o Operating Temperature Range ( C or F) a) o Wi the system operate in an environment in which the worst case temperature is above room temperature? b) o Wi the system be mounted in an encosure with other equipment generating heat? 12) o Controer / Drive Information? a) o Haydon Kerk IDEA Drive (with Size 17 Stepper Motors ony) b) o Customer Suppied Drive... Type? o Chopper Drive o L / R Drive Mode / Stye of Drive: 13) o Power Suppy Votage? (VDC) 14)* o Step Resoution? a) o Fu Step b) o Haf-Step c) o Micro-Step 15)* o Drive Current? (A rms / Phase) and (A peak / Phase) 16)* o Current Boost Capabiity? (%) * If the Haydon Kerk IDEA Drive is used disregard items 14, 15, and 16. 205

BGS Motorized Linear Rais Seector Chart BGS MOTORIZED BGS TM Linear Rais with Recircuating Ba Side The BGS Linear Rai combines many technoogies into a singe integrated inear motion patform. The system provides exceent oad capabiity and is engineered for both norma and overhanging oads. High ro, pitch, and yaw moment oading capabiity aows the system to maintain tight accuracy and repeatabiity, even in appications requiring significant cantievered oading. At the heart of the BGS Linear Rai system is a Haydon hybrid inear actuator with a precision 303 stainess stee ead-screw. The ead-screw drives a machined auminum carriage mounted to a precision stainess stee ba side resuting in a rigid, smooth-operating motion system. The screw is coated with Back Ice TFE coating providing a permanent wear-resistant dry ubrication. Motorized BGS Product Seector Chart BGS04 BGS06 BGS08 Hybrid Linear Actuator Motor... Max. Stroke Length Max. Load (Horizonta)** Ro Moment Pitch Moment Yaw Moment Thread Lead es mm 0.025 0.039 0.050 0.0625 0.079 0.098 0.100 0.118 0.125 0.157 0.197 0.200 0.250 0.315 0.375 0.394 0.400 0.472 0.500 0.630 0.750 0.984 1.000 1.200 0.635 1.00 1.27 1.59 2.00 2.50 2.54 3.00 3.18 4.00 5.00 5.08 6.35 8.00 9.53 10.00 10.16 12.00 12.70 16.00 19.05 25.00 25.40 30.48 Size 11 = 28000 Series Size 17 = 43000 Series Size 23 = 57000 Series Lead Code 0025 0039 0050 0063 0079 0098 0100 0118 0125 0157 0197 0200 0250 0315 0375 0394 0400 0472 0500 0630 0750 0984 1000 1200 Size 11 Doube Stack Size 17 Singe Stack* 18-in (460 mm) 22 bs (100 N) 5.72 bs-ft (7.75 N-m) 4.88 bs-ft (6.60 N-m) 5.68 bs-ft (7.70 N-m) Size 17 Singe Stack* Size 17 Doube Stack* 24-in (610 mm) 135 bs (600N) 11.62 bs-ft (15.75 N-m) 7.93 bs-ft (10.75 N-m) 9.15 bs-ft (12.40 N-m) Size 23 Singe Stack* Size 23 Doube Stack* 30-in (760 mm) 225 bs (1,000 N) 22.50 bs-ft (30.5 N-m) 19.36 bs-ft (26.25 N-m) 22.27 bs-ft (30.20 N-m) BGS04 BGS06 BGS08 ** For vertica oad information see specifications for Size 11 (28000 Series, page 84), Size 17 (43000 Series, page 95), and Size 23 (57000 Series, page 106). 206 * Size 17 (43000 Series) Singe and Doube Stack Hybrid Linear Actuator Stepper Motors (BGS06) are avaiabe with an optiona programmabe IDEA Drive. Integrated IDEA Drives are not avaiabe with the BGS08 stye inear rai.

BGS Motorized Linear Rais BGS04 Recircuating Ba Side BGS04 Linear Rai with Hybrid 28000 Series Size 11 Doube Stacks or 43000 Series Size 17 Linear Actuator Stepper Motors The BGS Linear Rai combines many technoogies into a singe integrated inear motion patform. The system provides exceent oad capabiity and is engineered for both norma and overhanging oads. BGS04 Size 11 Doube Stack Hybrid Motor Specifications: 28000 Series Size 11 Doube Stack See page 84 43000 Series Size 17 Singe Stack See page 95 43000 Series Size 17 IDEA Drive See page 100 Programmabe IDEA Drive See page 194 Integrated Connector Option See page 117 BGS04 Specifications BGS04 with Hybrid Linear Actuator Motor... Max. Stroke Length Max. Load (Horizonta)** Ro Moment Pitch Moment Yaw Moment * Size 17 is avaiabe with an optiona programmabe IDEA Drive. ** To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. Identifying the Motorized BGS04 part number codes when ordering BG S 04 B M 0025 XXX Prefix BG = Ba Guide System Frame Stye S = Standard NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Size 11 Doube Stack Size 17 Singe Stack* 18-in (460 mm) 22 bs (100 N) 5.72 bs-ft (7.75 N-m) 4.88 bs-ft (6.60 N-m) 5.68 bs-ft (7.70 N-m) Frame Size Load* 04 = Max. static oad 22 bs (100 N) Coating B = TFE wear resist, dry ubricant Back Ice Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 207 Thread Lead es mm 0.025 0.039 0.050 0.0625 0.079 0.100 0.118 0.200 0.635 1.00 1.27 1.59 2.00 2.54 3.00 5.08 Drive / Mounting M = Motorized Lead Code 0025 0039 0050 0063 0079 0100 0118 0200 0025 =.025-in For 43000 (.635) Series (see Lead Code Size 17 Ony charts above) G = IDEA integrated programmabe drive USB communications J = IDEA integrated programmabe drive RS485 communications Thread Lead es mm 0.250 0.394 0.500 0.750 1.000 Thread Lead Code 6.35 10.00 12.70 19.05 25.40 Lead Code 0250 0394 0500 0750 1000 Unique Identifier Suffix used to identify Size 11 or Size 17 motor or a proprietary suffix assigned to a specific customer appication.the identifier can appy to either a standard or custom part. BGS MOTORIZED

BGS Motorized Linear Rais BGS04 Dimensiona Drawings BGS04 Linear Rai with 28000 Series Size 11 Doube Stack inear motors Recommended for horizonta oads up to 22 bs (100 N) A B C D E F G H I J K L Z1 Z2 Z3 () mm (1.40) 33.56 (1.0) 25.40 (0.50) 12.70 (0.75) 19.05 (0.69) 17.53 (0.60) 15.24 (1.00) 25.40 (0.75) 19.05 * Dimension I is a function of required trave distance. * (1.22) 30.86 (0.87) 22.10 (0.75) 19.05 (0.11) 2.8 (0.20) 5.1 (0.09) 2.3 Dimensions = (es) mm 4 x M2x0.4 BGS04 Linear Rai with 43000 Series Size 17 Singe Stack inear motors Recommended for horizonta oads up to 22 bs (100 N) Dimensions = (es) mm BGS MOTORIZED...with IDEA Drive 4 x M2x0.4 Dimensions = (es) mm 4 x M2x0.4 208

BGS Motorized Linear Rais BGS06 Recircuating Ba Side BGS06 Linear Rai with Hybrid 43000 Series Size 17 Singe and Doube Stacks The BGS Linear Rai combines many technoogies into a singe integrated inear motion patform. The system provides exceent oad capabiity and is engineered for both norma and overhanging oads. Hybrid Motor Specifications: 43000 Series Size 17 Singe Stack See page 95 43000 Series Size 17 Doube Stack See page 102 43000 Series Size 17 IDEA Drive See page 100 Programmabe IDEA Drive See page 194 Integrated Connector Option See page 117 BGS06 Size 17 Singe Stack with IDEA Drive BGS06 Specifications BGS06 with Hybrid Linear Actuator Motor... Max. Stroke Length Max. Load (Horizonta)** Ro Moment Pitch Moment Yaw Moment Size 17 Singe Stack* Size 17 Doube Stack* 24-in (610 mm) 135 bs (600 N) 11.62 bs-ft (15.75 N-m) 7.93 bs-ft (10.75 N-m) 9.15 bs-ft (12.40 N-m) Thread Lead es mm 0.050 0.079 0.100 0.157 0.197 0.200 0.250 0.375 1.27 2.00 2.54 4.00 5.00 5.08 6.35 9.53 Lead Code 0050 0079 0100 0157 0197 0200 0250 0375 Thread Lead es mm 0.400 0.472 0.500 0.750 0.984 1.000 1.200 10.16 12.00 12.70 19.05 25.00 25.40 30.48 Lead Code 0400 0472 0500 0750 0984 1000 1200 * Avaiabe with an optiona programmabe IDEA Drive. ** To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. Identifying the Motorized BGS part number codes when ordering BG S 06 B G 0079 XXX BGS MOTORIZED Prefix BG = Ba Guide System Frame Stye S = Standard NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Frame Size Load* 06 = Max. static oad 135 bs (600 N) Coating B = TFE wear resist, dry ubricant Back Ice Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 209 Drive / Mounting M = Motorized G = IDEA integrated programmabe drive - USB communications J = IDEA integrated programmabe drive - RS485 communications Thread Lead Code 0079 =.079-in (2.0) (see Lead Code charts above) Unique Identifier Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part.

BGS Motorized Linear Rais BGS06 Dimensiona Drawings BGS06 Linear Rai with Hybrid 43000 Size 17 inear motors are recommended for horizonta oads up to 135 bs (600 N) A B C D E F G H I J K L Z1 Z2 Z3 () mm (2.00) 50.80 (1.50) 38.10 (0.75) 19.05 (1.13) 28.58 (0.81) 20.57 (0.90) 22.86 (1.50) 38.10 (1.25) 31.75 * Dimension I is a function of required trave distance. * (1.50) 38.15 (1.05) 26.77 (1.13) 28.58 (0.14) 3.6 (0.25) 6.4 (0.13) 3.3 Dimensions = (es) mm 4 x M3x0.5 BGS06 Linear Rai with Hybrid 43000 Size 17 inear motors with programmabe IDEA Drive BGS MOTORIZED Dimensions = (es) mm 4 x M3x0.5 210

BGS Motorized Linear Rais BGS08 Recircuating Ba Side BGS08 Linear Rai with Hybrid 57000 Series Size 23 Singe and Doube Stacks This BGS heavy-duty inear rai combines many technoogies into a singe integrated inear motion patform. The ead-screw drives a machined auminum carriage mounted to a precision stainess stee ba side resuting in a rigid, smooth-operating motion system. BGS08 Size 23 Doube Stack Hybrid Motor Specifications: 57000 Series Size 23 Singe Stack See page 106 57000 Series Size 23 Doube Stack See page 111 BGS08 Specifications BGS08 with Hybrid Linear Actuator Motor... Max. Stroke Length Max. Load (Horizonta)** Ro Moment Pitch Moment Yaw Moment Size 23 Singe Stack Size 23 Doube Stack 30-in (760 mm) 225 bs (1,000 N) 22.50 bs-ft (30.5 N-m) 19.36 bs-ft (26.25 N-m) 22.27 bs-ft (30.20 N-m) Thread Lead es 0.098 0.100 0.197 0.200 0.500 0.630 1.000 mm 2.50 2.54 5.00 5.08 12.70 16.00 25.40 Lead Code 0098 0100 0197 0200 0500 0630 1000 ** To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. Identifying the Motorized BGS part number codes when ordering BG S 08 B M 0197 XXX BGS MOTORIZED Prefix BG = Ba Guide System Frame Stye S = Standard NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Frame Size Load* 08 = Max. static oad 225 bs (1,000 N) Coating B = TFE wear resist, dry ubricant Back Ice Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Drive / Mounting M = Motorized Thread Lead Code 0197 =.197-in (5.0) (see Lead Code charts above) Unique Identifier Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. 211

BGS Motorized Linear Rais BGS08 Dimensiona Drawings BGS08 Linear Rai with Hybrid 57000 Size 23 inear motors are recommended for horizonta oads up to 225 bs (1,000 N) A B C D E F G H I J K L Z1 Z2 Z3 () mm (2.70) 68.58 (1.75) 44.45 (1.00) 25.40 (1.60) 40.64 (0.98) 24.89 (1.25) 31.75 (1.50) 38.10 (1.25) 31.75 * Dimension I is a function of required trave distance. * (1.79) 45.39 (1.29) 32.69 (1.60) 40.64 (0.20) 5.1 (0.33) 8.4 (0.19) 4.8 Dimensions = (es) mm I DIMENSION I = TRAVEL + A + H + (0.475) 12.065 TRAVEL H (1.780) 45.20 SINGLE STACK (2.598) 66 DOUBLE STACK K J G L A (.063) 1.60 B F (2.220) 56.40 BGS MOTORIZED E C Z1 WIDE SLOT THRU D Z2 C'BORE SLOT Z1 THRU HOLE WITH 4 x 10 24 M4x0.7 UNC or Z3 DEEP Z2 BORE X Z3 DEEP 4 x M5x0.8 BGS08 SZ 23 SS DS 212

RGS Motorized Linear Rais Rapid Guide Screw Seector Chart Motorized RGS Rapid Guide Screw Linear Rais The Motorized RGS Rapid Guide Screw is a screw-driven rai that offers exceptiona inear speed, accurate positioning, and ong ife in a compact, vaue-priced assemby. The ength and speed of the RGS is not imited by critica screw speed, aowing high RPM and inear speeds, even over ong spans. Lengths up to 8 feet (2.4 meters) can readiy be buit, and onger engths are possibe on a specia order basis. This system combines many Haydon Kerk Motion Soutions patented motion technoogies into a singe integrated, inear motion contro system. The Motorized RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. When integrated with an IDEA Drive, the system combines Haydon hybrid inear actuator technoogy with a fuy programmabe, integrated stepper motor drive. By combining technoogies into a singe preassembed unit, Haydon Kerk Motion Soutions is abe to improve system integration for the equipment OEM or end user. The overa cost for the customer is aso owered by offering a compete soution as it eiminates the need for rotary-to-inear conversion, as we as simpifies product deveopment with fewer components required. Motorized RGS04 with 28000 Series Doube Stack Motorized RGW06 with 43000 Series Doube Stack Motorized RGW10 with 57000 Series Doube Stack Motorized RGS Seector Chart Thread Lead es mm 0.025 0.039 0.050 0.0625 0.079 0.098 0.100 0.118 0.125 0.157 0.197 0.200 0.250 0.315 0.375 0.394 0.400 0.472 0.500 0.630 0.750 0.984 1.000 1.200 1.500 2.000 0.635 1.00 1.27 1.59 2.00 2.50 2.54 3.00 3.18 4.00 5.00 5.08 6.35 8.00 9.53 10.00 10.16 12.00 12.70 16.00 19.05 25.00 25.40 30.48 38.10 50.80 Lead Code 0025 0039 0050 0063 0079 0098 0100 0118 0125 0157 0197 0200 0250 0315 0375 0394 0400 0472 0500 0630 0750 0984 1000 1200 1500 2000 RGS04 Size 11DS Size 17SS Size 17DS RGS06 Size 17SS Size 17DS Size 23SS Size 23DS RGW06 Size 17SS Size 17DS Size 23SS Size 23DS RGS08 Size 23SS Size 23DS Pease consut factory for other avaiabe eads The RGS and RGW stye numbers 04, 06, 08 and 10 indicate the recommended oad capacity of the system. For motor specifications: Size 11 DS (28000 Series), see page 84; Size 17 SS (43000 Series), see page 95; Size 17 DS (43000 Series), see page 102; Size 23 SS (57000 Series), see page 106; Size 23 DS (57000 Series), see page 111. 213 RGS10 Size 23SS Size 23DS RGW10 Size 23SS Size 23DS Size 11 = 28000 Series Size 17 = 43000 Series Size 23 = 57000 Series SS = Singe Stack, standard Hybrid Linear Actuator Stepper Motor DS = Doube Stack Hybrid Linear Actuator Stepper Motor RGW = wide base with parae guide tracks for traversing sensor mount devices RGS MOTORIZED

RGS Non-Motorized Linear Rais Rapid Guide Screw Seector Chart Non-Motorized RGS Linear Rais Product Seector Chart Rapid Guide Screw RGS 04 RGS 04 RGS 04 RGS 04 RGS 06 RGS 06 RGS 06 RGS 06 RGS 08 RGS 08 RGS 08 RGS 08 RGS 10 RGS 10 RGS 10 RGS 10 Inch Lead.100 (2.54).200 (5.08).500 1.000 (25.40).100 (2.54).200 (5.08).500 1.000 (25.40).100 (.254).200 (5.08).500 1.000 (25.40).100 (2.54).200 (5.08).500 1.000 (25.40) Thread Lead Code 0100 0200 0500 1000 0100 0200 0500 1000 0100 0200 0500 1000 0100 0200 0500 1000 Rai Diam. 0.4 (10.2) 0.4 (10.2) 0.4 (10.2) 0.4 (10.2) 0.6 (15.2) 0.6 (15.2) 0.6 (15.2) 0.6 (15.2) 0.8 (20.3) 0.8 (20.3) 0.8 (20.3) 0.8 (20.3) 1.0 (25.4) 1.0 (25.4) 1.0 (25.4) 1.0 (25.4) Screw Diam. 1/4 (6.4) 1/4 (6.4) 1/4 (6.4) 1/4 (6.4) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) Typica Drag Torque oz - in (N-m) 3.0 (.02) 4.0 (.03) 5.0 (.04) 6.0 (.04) 4.0 (.03) 5.0 (.04) 6.0 (.04) 7.0 (.05) 5.0 (.04) 6.0 (.04) 7.0 (.05) 8.0 (.06) 5.0 (.04) 6.5 (.05) 7.0 (.05) 8.5 (.06) Life @ 1/4 Design Load* (cm) Torque-to- Move Load* oz-in/b (N-m/Kg) 1.0 (.016) 1.5 (.023) 2.5 (.039) 4.5 (.070) 1.0 (.016) 1.5 (.023) 2.5 (.039) 4.5 (.070) 1.1 (.018) 1.7 (.027) 3.0 (.047) 6.0 (.096) 1.3 (.020) 2.0 (.031) 3.0 (.047) 6.5 (.101) Design Load* bs (N) 15 (67) 15 (67) 15 (67) 15 (67) 35 (156) 35 (156) 35 (156) 35 (156) 50 (222) 50 (222) 50 (222) 50 (222) 100 (445) 100 (445) 100 (445) 100 (445) Screw Inertia oz-in sec 2 /in (KgM 2 /M).3 x 10-5 (6.5 x 10-6 ).3 x 10-5 (6.5 x 10).3 x 10-5 (6.5 x 10-6 ).3 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 14.2 x 10-5 (3.9 x 10-5 ) 14.2 x 10-5 (3.9 x 10-5 ) 14.2 x 10-5 (3.9 x 10-5 ) 14.2 x 10-5 (3.9 x 10-5 ) NOTE: RGS assembies with engths over 36-in. (914.4 mm) and/or eads higher than.5-in (12.7 mm) wi ikey have higher drag torque than isted vaues. * Determined with oad in a horizonta position RGS MOTORIZED 214

RGS04 Motorized Linear Rais 28000 Series Size 11 Doube Stack RGS04 Linear Rai with a 28000 Series Size 11 Doube Stack The RGS04 is a screw-driven rai that offers exceptiona inear speed, accurate positioning, and ong ife in a compact, vaue-priced assemby. The RGS04 28000 Series is smaest avaiabe screwdriven side. It offers a compact profie, reiabe inear speed, accurate positioning, and ong ife in a high quaity assemby. The ength and speed of the RGS is not imited by critica screw speed, aowing high RPM and inear speeds, even over ong spans. Hybrid Motor Specifications: 28000 Series Size 11 Doube Stack See page 84 Integrated Connector Option See page 117 To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGS04 Linear Rai with Hybrid 28000 Series Size 11 Doube Stack inear motors Recommended for horizonta oads up to 15 bs (67 N) RGS04 28000 Series Size 11 Doube Stack A D D1 E F G H I* L1 N N1 P Q S T U V Z1 Z2 Z3 () mm (0.4) 10.2 (0.75) 19.0 (0.75) 19.0 (0.53) 13.5 (1.4) 35.6 * Metric threads aso avaiabe for carriage. (1.0) 25.4 (0.5) 12.7 4-40 UNC (0.5) 12.7 (0.375) 9.52 (1.0) 25.4 (0.6) 15.2 (0.5) 12.7 (0.37) 9.4 (0.15) 3.8 (0.23) 5.8 (0.7) 18.5 (0.11) 18 (0.2) 5.1 (0.09) 2.3 Dimensions = (es) mm Identifying the Motorized RGS part number codes when ordering RG S 04 K M 0100 XXX Prefix RG = Rapid Guide Screw Frame Stye S = Standard Carriage hoes avaiabe in Metric sizes M3 M4 NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Frame Size Load* 04 = 15 bs (67 N) (Maximum static oad) Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Drive / Mounting M = Motorized (Doube Stack ony) Standard products avaiabe 24-hrs. 215 Thread Lead Code 0025 =.025-in (.635) 0039 =.039-in (1.00) 0050 =.050-in (1.27) 0063 =.0625-in (1.59) 0079 =.079-in (2.00) 0100 =.100-in (2.54) 0118 =.118-in (3.00) 0200 =.200-in (5.08) 0250 =.250-in (6.35) 0394 =.394-in (10.00) 0500 =.500-in 0750 =.750-in (19.05) Unique Identifier Suffix used to identify specific motors (28000 Doube Stack) or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. RGS MOTORIZED

RGS04 Motorized Linear Rais 43000 Series Size 17 Singe/Doube Stack RGS04 Linear Rai with 43000 Series Size 17 Singe Stack or Doube Stack Linear Actuator Stepper Motors The RGS04 is a screw-driven rai that offers exceptiona inear speed, accurate positioning, and ong ife in a compact, vaue-priced assemby. It offers a compact profie, reiabe inear speed, accurate positioning, and ong ife in a high quaity assemby. The ength and speed of the RGS is not imited by critica screw speed, aowing high RPM and inear speeds, even over ong spans. Hybrid Motor Specifications: 43000 Series Size 17 Singe Stack See page 95 43000 Series Size 17 Doube Stack See page 102 43000 Series Size 17 IDEA Drive See page 100 Programmabe IDEA Drive See page 194 Integrated Connector Option See page 117 RGS04 Size 43000 Series Size 17 Doube Stack To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. Identifying the Motorized RGS part number codes when ordering RG S 04 K M 0100 XXX RGS MOTORIZED Prefix RG = Rapid Guide Screw Frame Stye S = Standard Frame Size Load* 04 = 15 bs (67 N) (Maximum static oad) Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Drive / Mounting M = Motorized G = IDEA integrated programmabe drive USB communications J = IDEA integrated programmabe drive RS485 communications Standard products avaiabe 24-hrs. Thread Lead Code 0025 =.025-in (.635) 0039 =.039-in (1.00) 0050 =.050-in (1.27) 0063 =.0625-in (1.59) 0079 =.079-in (2.00) 0100 =.100-in (2.54) 0118 =.118-in (3.00) 0200 =.200-in (5.08) 0250 =.250-in (6.35) 0394 =.394-in (10.00) 0500 =.500-in 0750 =.750-in (19.05) Unique Identifier Suffix used to identify specific motors (43000 Singe/ Doube Stack) or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. 216

RGS04 Motorized Linear Rais 43000 Series Dimensiona Drawings RGS04 with 43000 Series Size 17 Singe Stack and Doube Stack inear actuator stepper motors Recommended for horizonta oads up to 15 bs (67 N) A D D1 E F G H I* L1 N N1 P Q S T U V Z1 Z2 Z3 () mm (0.4) 10.2 (0.75) 19.0 (0.75) 19.0 (0.53) 13.5 (1.4) 35.6 (1.0) 25.4 (0.5) 12.7 4-40 UNC (0.5) 12.7 (0.375) 9.52 (1.0) 25.4 (0.6) 15.2 (0.5) 12.7 (0.37) 9.4 (0.15) 3.8 (0.23) 5.8 (0.73) 18.5 (0.11) 2.8 (0.2) 5.1 (0.09) 2.3 * Metric threads aso avaiabe for carriage. Dimensions = (es) mm RGS04 with 43000 Series Size 17 Singe Stack and Doube Stack inear actuator stepper motors with an integrated programmabe IDEA Drive Recommended for horizonta oads up to 15 bs (67 N) A D D1 E F G H I* L1 N N1 P Q S T U V Z1 Z2 Z3 () mm (0.4) 10.2 (0.75) 19.0 (0.75) 19.0 (0.53) 13.5 (1.4) 35.6 (1.0) 25.4 (0.5) 12.7 4-40 UNC (0.5) 12.7 (0.375) 9.52 (1.0) 25.4 (0.6) 15.2 (0.5) 12.7 (0.37) 9.4 (0.15) 3.8 (0.23) 5.8 (0.73) 18.5 (0.11) 2.8 (0.2) 5.1 (0.09) 2.3 * Metric threads aso avaiabe for carriage. Dimensions = (es) mm RGS MOTORIZED 217

RGS04 Non-Motorized Linear Rais With and Without Guide Screw RGS04 Non-Motorized Linear Rais The Non-motorized RG Series inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. RGS04 Non-motorized Screw-driven inear rai To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGS04 Non-motorized inear rai without screw Identifying the Non-Motorized RGS part number codes when ordering RG S 04 K A 0100 XXX Prefix RG = Rapid Guide Screw Frame Stye S = Standard Carriage hoes avaiabe in Metric sizes M3 M4 Frame Size Load 04 = 15 bs (67 N) (Maximum static oad) NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Drive / Mounting A = None Standard products avaiabe 24-hrs. Thread Lead Code 0000 = No screw 0100 =.100-in (2.54) 0200 =.200-in (5.08) 0500 =.500-in 1000 = 1.000-in (25.4) Unique Identifier Suffix used to identify specific features or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. RGS04 Screw-Driven inear rai WITHOUT MOTOR Standard Series Specifications Inch Lead Thread Lead Code Rai Diam. Screw Diam. Typica Drag Torque oz - in (N-m) Life @ 1/4 Design Load* (cm) Torque-to- Move Load* oz-in/b (N-m/Kg) Design Load* bs (N) Screw Inertia oz-in sec 2 /in (KgM 2 /M) RGS NON-MOTORIZED RGS04 Non- Motorized with Guide Screw.100 (2.54).200 (5.08).500 1.000 (25.40) 0100 0200 0500 1000 0.4 (10.2) 0.4 (10.2) 0.4 (10.2) 0.4 (10.2) 1/4 (6.4) 1/4 (6.4) 1/4 (6.4) 1/4 (6.4) 3.0 (.02) 4.0 (.03) 5.0 (.04) 6.0 (.04) NOTE: RGS assembies with engths over 36-in. (914.4 mm) and/or eads higher than.5-in (12.7 mm) wi ikey have higher drag torque than isted vaues. * Determined with oad in a horizonta position 218 1.0 (.016) 1.5 (.023) 2.5 (.039) 4.5 (.070) 15 (67) 15 (67) 15 (67) 15 (67).3 x 10-5 (6.5 x 10-6 ).3 x 10-5 (6.5 x 10).3 x 10-5 (6.5 x 10-6 ).3 x 10-5 (6.5 x 10-6 )

RGS04 Non-Motorized Linear Rais Dimensiona Drawings Dimensiona Drawings: RGS04 Screw-Driven inear rai WITHOUT MOTOR Recommended for horizonta oads up to 15 bs (67 N) Dimensions = es N +.0000.0005 (+0.0 0.013) Dimensions: RGS04 Standard, nonmotorized with guide screw RGS04 RGS04 A B C D D1 E F G H.40 (10.2).600 (15.24).83 (21.1).50 (12.7).1250 (3.175).52 (13.2).75 (19.1).37 (9.4).75 (19.1).15 (3.8).53 (13.5).23 (5.8) 1.38 (35.1).7 (18) 1.000 (25.40).38 (9.7).500 (12.7).115 (2.92) I* 4-40 UNC.11 (2.8) K L1 L2.6 (15).20 (5.1).53 (13.5) P Q R S T U V X Y Z1 Z2 Z3.09 (2.3).47 (11.9) N.375 (9.53) * Metric carriage hoe sizes avaiabe: M3 and M4 Dimensiona Drawings: RGS04 WITHOUT MOTOR or GUIDE SCREW Standard Series Recommended for horizonta oads Dimensions = es up to 15 bs (67 N) Dimensions: RGS04 Standard, nonmotorized without guide screw RGS04 A D D1 E F G H.40 (10.2).75 (19.1).75 (19.1).53 (13.5) 1.4 (36) 1.000 (25.40).500 I* 4-40 UNC N P Q S T U V.375 (9.53).600 (15.24).50 (12.7).37 (9.4).15 (3.8).23 (5.8).7 (18) Z1.11 (2.8) Z2.20 (5.1) Z3.09 (2.3) RGS NON-MOTORIZED * Metric carriage hoe sizes avaiabe: M3 and M4 219

RGS06 Motorized Linear Rais 43000 Series Size 17 Singe/Doube Stack RGS06 and RGW06 WIDE Series Linear Rai with Hybrid 43000 Series Size 17 Linear Actuator Stepper Motors This system combines many Haydon Kerk Motion Soutions patented motion technoogies into a singe integrated, inear motion contro system. The Motorized RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. When integrated with an IDEA Drive, the system combines Haydon hybrid inear actuator technoogy with a fuy programmabe, integrated stepper motor drive. Hybrid Motor Specifications: 43000 Series Size 17 Singe Stack See page 95 43000 Series Size 17 Doube Stack See page 102 43000 Series Size 17 IDEA Drive See page 100 Programmabe IDEA Drive See page 194 Integrated Connector Option See page 117 To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGW06 43000 Series Size 17 Doube Stack with programmabe IDEA Drive Identifying the Motorized RGS part number codes when ordering RG S 06 K M 0100 XXX RGS MOTORIZED Prefix RG = Rapid Guide Screw NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 203 756 7441. Frame Stye S = Standard W = Wide sensor mount capabiity Frame Size Load 06 = 35 bs (156 N) (Maximum static oad) Standard products avaiabe 24-hrs. Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Drive / Mounting M = Motorized G = Motorized + IDEA integrated programmabe drive USB communications J = Motorized + IDEA integrated programmabe drive RS485 communications Thread Lead Code 0050 =.050-in (1.27) 0079 =.079-in (2.00) 0100 =.100-in (2.54) 0157 =.157-in (4.00) 0197 =.197-in (5.00) 0200 =.200-in (5.08) 0250 =.250-in (6.35) 0375 =.375-in (9.53) 0400 =.400-in (10.16) 0472 =.472-in (12.00) 0500 =.500-in 0750 =.750-in (19.05) 0984 =.984-in (25.00) 1000 = 1.000-in (25.4) 1200 = 1.200-in (30.48) Unique Identifier Suffix used to identify specific motors (43000 Singe/ Doube Stack or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. 220

RGS06 Motorized Linear Rais 43000 Series Dimensiona Drawings RGS06 STANDARD Series with 43000 Series Size 17 Singe and Doube Stack Recommended for horizonta oads up to 35 bs (156 N) A D D1 E F G H I* L1 N N1 P Q S T U V Z1 Z2 Z3 () mm (0.6) 15.2 (1.13) 28.7 (1.13) 28.7 (0.79) 20.1 (2.0) 50.8 (1.5) 38.1 (0.75) 19.0 6-32 UNC (1.0) 25.4 (0.5) 12.7 (1.5) 38.1 (0.9) 22.9 (0.74) 18.8 (0.55) 13.9 (0.22) 5.6 (0.35) 8.9 (1.1) 27.8 (0.14) 3.6 (0.25) 6.3 (0.13) 3.3 * Metric threads aso avaiabe for carriage. Dimensions = (es) mm * Metric threads aso avaiabe for carriage. RGW06 WIDE Series with 43000 Series Size 17 Singe and Doube Stack Recommended for horizonta oads up to 35 bs (156 N) A D D1 F G H I* L1 N P Q S1 T U V Z1 Z2 Z3 () mm (0.6) 15.2 (2.0) 50.8 (1.13) 28.7 (2.0) 50.8 (1.5) 38.1 (0.75) 19.0 6-32 UNC (1.0) 25.4 (0.5) 12.7 (1.46) 37.1 (1.04) 26.4 (0.83) 21.1 (0.51) 13.0 (0.63) 16.0 (1.39) 35.3 (0.14) 3.6 (0.25) 6.3 (0.14) 3.6 * Metric threads aso avaiabe for carriage. Dimensions = (es) mm RGW06 Sensor Mount Kit Part No. RGW06SK Sensor mounting kits, based on a U-channe optica sensor, are avaiabe for the RGW Series. Each kit incudes one fag, three sensor mounts, and a mounting hardware. Sensors are not incuded in the kit and must be ordered separatey from the sensor manufacturer. 221 FLAG mounts to side of carriage SENSOR MOUNT inserts into sot of RGW base RGS MOTORIZED

RGS06 and RGW06 Motorized Linear Rais 43000 Series IDEA Drive Drawings RGS06 STANDARD Series with 43000 Series Size 17 Singe and Doube Stack inear motors with IDEA Drive Recommended for horizonta oads up to 35 bs (156 N) A D D1 E F G H I* L1 N N1 P Q S T U V Z1 Z2 Z3 () mm (0.6) 15.2 (1.13) 28.7 (1.13) 28.7 (0.79) 20.1 (2.0) 50.8 (1.5) 38.1 (0.75) 19.0 6-32 UNC (1.0) 25.4 (0.5) 12.7 (1.5) 38.1 (0.9) 22.9 (0.74) 18.8 (0.55) 13.9 (0.22) 5.6 (0.35) 8.9 (1.1) 27.9 (0.14) 3.6 (0.25) 6.3 (0.13) 3.3 * Metric threads aso avaiabe for carriage. Dimensions = (es) mm RGW06 WIDE Series with 43000 Series Size 17 Singe and Doube Stack inear motors with IDEA Drive Recommended for horizonta oads up to 35 bs (156 N) A D D1 F G H I* L1 N P Q S1 T U V Z1 Z2 Z3 () mm (0.6) 15.2 (2.0) 50.8 (1.13) 28.7 (2.0) 50.8 (1.5) 38.1 (0.75) 19.0 6-32 UNC (1.0) 25.4 (0.5) 12.7 (1.46) 37.1 (1.04) 26.4 (0.83) 21.1 (0.51) 13.0 (0.63) 16.0 (1.39) 35.3 (0.14) 3.6 (0.25) 6.3 (0.14) 3.6 * Metric threads aso avaiabe for carriage. Dimensions = (es) mm RGS MOTORIZED RGW06 Sensor Mount Kit Part No. RGW06SK Sensor mounting kits, based on a U-channe optica sensor, are avaiabe for the RGW Series. Each kit incudes one fag, three sensor mounts, and a mounting hardware. Sensors are not incuded in the kit and must be ordered separatey from the sensor manufacturer. 222 FLAG mounts to side of carriage SENSOR MOUNT inserts into sot of RGW base

RGS06 and RGW06 Motorized Linear Rais 57000 Series Size 23 Singe/Doube Stack RGS06 Series and RGW06 Wide Series Linear Rai with Hybrid 57000 Series Size 23 Linear Actuator Stepper Motors A combination of Haydon Kerk Motion Soutions patented motion technoogies into a singe integrated, inear motion contro system. RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. Hybrid Motor Specifications: 57000 Series Size 23 Singe Stack See page 106 57000 Series Size 23 Doube Stack See page 111 To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGW06 57000 Series Size 23 Doube Stack Identifying the Motorized RGS part number codes when ordering RG S 06 K M 0100 XXX Prefix RG = Rapid Guide Screw Frame Stye S = Standard W = Wide sensor mount capabiity Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Frame Size Load 06 = 35 bs (156 N) (Maximum static oad) Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Standard products avaiabe 24-hrs. 223 Drive / Mounting M = Motorized NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Thread Lead Code 0050 =.050-in (1.27) 0079 =.079-in (2.00) 0100 =.100-in (2.54) 0157 =.157-in (4.00) 0197 =.197-in (5.00) 0200 =.200-in (5.08) 0250 =.250-in (6.35) 0375 =.375-in (9.53) 0400 =.400-in (10.16) 0472 =.472-in (12.00) 0500 =.500-in 0750 =.750-in (19.05) 0984 =.984-in (25.00) 1000 = 1.000-in (25.4) 1200 = 1.200-in (30.48) Unique Identifier Suffix used to identify specific motors (57000 Singe/ Doube Stack) or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. RGS MOTORIZED

RGS06 and RGW06 Motorized Linear Rais 57000 Series Dimensiona Drawings RGS06 STANDARD Series with 57000 Series Size 23 Singe and Doube Stack Recommended for horizonta oads up to 35 bs (156 N) Dimensions = (es) mm Q () mm A (0.6) 15.2 D (1.13) 28.7 D1 (1.13) 28.7 E (0.79) 20.1 F (2.0) 50.8 * Metric threads aso avaiabe for carriage. G (1.5) 38.1 H (0.75) 19.0 I* 6-32 UNC L1 (1.0) 25.4 RGW06 WIDE Series with 57000 Series Size 23 Singe and Doube Stack Recommended for horizonta oads up to 35 bs (156 N) N (0.5) 12.7 N1 (1.5) 38.1 P (0.9) 22.9 Q (0.74) 18.8 S (0.55) 13.9 T (0.22) 5.6 U (0.35) 8.9 V (1.1) 27.9 Z1 (0.14) 3.6 Z2 (0.25) 6.3 Z3 (0.13) 3.3 Dimensions = (es) mm Q RGS MOTORIZED () mm A (0.6) 15.2 D (2.0) 50.8 D1 (1.13) 28.7 F (2.0) 50.8 G (1.5) 38.1 * Metric threads aso avaiabe for carriage. H (0.75) 19.0 I* 6-32 UNC L1 (1.0) 25.4 N (0.5) 12.7 224 P (1.46) 37.1 Q (1.04) 26.4 RGW06 Sensor Mount Kit Part No. RGW06SK Sensor mounting kits, based on a U-channe optica sensor, are avaiabe for the RGW Series. Each kit incudes one fag, three sensor mounts, and a mounting hardware. Sensors are not incuded in the kit and must be ordered separatey from the sensor manufacturer. S (0.83) 21.1 T (0.51) 13.0 U (0.63) 16.0 V (1.39) 35.3 Z1 (0.14) 3.6 Z2 (0.25) 6.3 FLAG mounts to side of carriage SENSOR MOUNT inserts into sot of RGW base Z3 (0.14) 3.6

RGS06 Non-Motorized Linear Rais With and Without Guide Screw RGS06 Standard Series and RGW06 Wide Series Non-Motorized Linear Rais Non-motorized RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGW06 non-motorized with drive screw RGW06 non-motorized without drive screw Identifying the Non-Motorized RGS part number codes when ordering RG S 06 K A 0100 XXX Prefix RG = Rapid Guide Screw Frame Stye S = Standard W = Wide sensor mount capabiity NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Frame Size Load 06 = 35 bs (156 N) (Maximum static oad) Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Standard products avaiabe 24-hrs. Drive / Mounting A = None B = In-ine screw motor mount Thread Lead Code 0000 = No screw 0100 =.100-in (2.54) 0200 =.200-in (5.08) 0500 =.500-in 1000 = 1.000-in (25.4) Unique Identifier Suffix used to identify specific features or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. RGS NON-MOTORIZED 225

RGS06 Non-Motorized Standard Linear Rais With Guide Screw RGS06 Screw-Driven STANDARD Series inear rai WITHOUT MOTOR Specifications Inch Lead Thread Lead Code Rai Diam. Screw Diam. Typica Drag Torque oz - in (N-m) Life @ 1/4 Design Load* (cm) Torque-to- Move Load* oz-in/b (N-m/Kg) Design Load* bs (N) Screw Inertia oz-in sec 2 /in (KgM 2 /M) RGS06 Non- Motorized with Guide Screw.100 (2.54).200 (5.08).500 1.000 (25.40) 0100 0200 0500 1000 0.6 (15.2) 0.6 (15.2) 0.6 (15.2) 0.6 (15.2) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 4.0 (.03) 5.0 (.04) 6.0 (.04) 7.0 (.05) NOTE: RGS assembies with engths over 36-in. (914.4 mm) and/or eads higher than.5-in (12.7 mm) wi ikey have higher drag torque than isted vaues. * Determined with oad in a horizonta position 1.0 (.016) 1.5 (.023) 2.5 (.039) 4.5 (.070) 35 (156) 35 (156) 35 (156) 35 (156) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) Dimensiona Drawings: RGS06 Screw-Driven STANDARD Series inear rai WITHOUT MOTOR Recommended for horizonta oads up to 35 bs (156 N) Dimensions = es N +.0000.0005 (+0.0 0.013) RGS NON-MOTORIZED Dimensions RGS06 RGS06 A B C D D1 E F G H.60 (15.2).900 (22.86) 1.25 (31.8).74 (18.8).1875 (4.762).80 (20.3) 1.13 (28.6).55 (14.0) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 1.13 (28.6).22 (5.6).79 (20.1).35 (8.9) 2.0 (51) 1.1 (28) 226 1.500 (38.10).50 (12.7).750 (19.1).170 (4.32) I* 6-32 UNC.14 (3.6) K L1 L2.9 (23).25 (6.4).80 (20.3) P Q R S T U V X Y Z1 Z2 Z3.13 (3.3).80 (20.3) N.500

RGW06 Non-Motorized Wide Linear Rais With Guide Screw Dimensiona Drawings: RGW06 WIDE Series Screw-Driven inear rai WITHOUT MOTOR Recommended for horizonta oads up to 35 bs (156 N) Dimensions = es A B C D D1 F G H I* K L1 L2 N RGW06.60 (15.2) 1.25 (31.8).1875 (4.762) 2.00 (50.8) 1.13 (28.6) 2.00 (50.8) 1.500 (38.10).750 (19.05) 6-32 (UNC) 1.2 (30).80 (20.3).80 (20.3).500 RGW06 P Q R S1 T U V X Y Z1 Z2 Z3 1.460 (37.08) 1.04 (26.4).80 (20.3).83 (21.2).51 (13.0).63 (16.0) 1.4 (36).50 (12.7).170 (4.32).14 (3.6).25 (6.4).14 (3.6) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 MOTOR MOUNT for RGW06 WIDE Series Screw-Driven inear rai WITHOUT MOTOR Dimensions = es * NOTE: The couping shown in the Dimensiona Drawing is not incuded. A D D1 D2 F G H I* L1 L2 L3 N N1 RGW06.60 (15.2) 2.00 (50.8) 1.13 (28.6) 1.67 (42.2) 2.0 (50.8) 1.500 (38.10).750 (19.05) 6-32 UNC.80 (20.3) 1.93 (48.9).31 (7.9).500 1.50 (38.1) RGW06 P Q R S1 T U V V1 Z1 Z2 Z3 1.460 (37.08) 1.04 (26.4).78 (19.8).83 (21.2).51 (13.0).63 (16.0) 1.39 (35.3) 1.7 (43).14 (3.6).25 (6.4) RGW06 Sensor Mount Kit Part No. RGW06SK Sensor mounting kits, based on a U-channe optica sensor, are avaiabe for the RGW Series. Each kit incudes one fag, three sensor mounts, and a mounting hardware. Sensors are not incuded in the kit and must be ordered separatey from the sensor manufacturer. 227.14 (3.6) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 FLAG mounts to side of carriage SENSOR MOUNT inserts into sot of RGW base RGS NON-MOTORIZED

RGS06 and RGW06 Non-Motorized Linear Rais Without Guide Screw Dimensiona Drawings: RGS06 WITHOUT motor and WITHOUT Guide Screw STANDARD Series Recommended for horizonta oads up to 35 bs (156 N) Dimensions = es A D D1 E F G H I* N P Q S T U V Z1 Z2 Z3 RGS06.60 (15.2) 1.13 (28.6) 1.13 (28.6).79 (20.1) 2.0 (51) 1.500 (38.10).750 (19.05) 6-32 UNC.500.900 (22.86).74 (18.8).55 (14.0).22 (5.6).35 (8.9) 1.1 (28).14 (3.6).25 (6.4).13 (3.3) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 Dimensiona Drawings: RGW06 WITHOUT motor and WITHOUT Guide Screw WIDE Series Recommended for horizonta oads up to 35 bs (156 N) RGS NON-MOTORIZED Dimensions = es RGW06 A D D1 F G H.60 (15.2) 2.00 (50.8) 1.13 (28.6) 2.00 (50.8) 1.500 (38.10).750 (19.05) I* 6-32 UNC N P Q S T U V Z1 Z2 Z3.500 1.460 (37.08) 1.04 (26.4).83 (21.2).51 (13.0).63 (16.0) 1.4 (36).14 (3.6).25 (6.4).14 (3.6) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 228

RGS08 Motorized Linear Rais 57000 Series Size 23 Singe/Doube Stack RGS08 Series for Heavier Weight Appications with Hybrid 57000 Series Stepper Motors A combination of patented motion technoogies into a singe integrated, inear motion contro system. RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. Identifying the Motorized RGS part number codes when ordering RGS08 57000 Series Size 23 Doube Stack Hybrid Motor Specifications: 57000 Series Size 23 Singe Stack See page 106 57000 Series Size 23 Doube Stack See page 111 Linear Rai Appications Checkist See page 203 RG S 08 K M 0100 XXX Prefix RG = Rapid Guide Screw Frame Stye S = Standard Standard products avaiabe 24-hrs. Frame Size Load 08 = 50 bs (222 N) (Maximum static oad) NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease RGS08 with 57000 Series Size 23 Singe and Doube Stack inear motors Recommended for horizonta oads up to 50 bs (222 N) Drive / Mounting M = Motorized Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Thread Lead Code 0098 =.098-in (2.50) 0100 =.100-in (2.54) 0197 =.197-in (5.00) 0200 =.200-in (5.08) 0500 =.500-in 0630 =.630-in (16.00) 1000 = 1.000-in (25.4) Unique Identifier Suffix used to identify specific motors (57000 Singe/ Doube Stack or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. Dimensions = (es) mm A D D1 E F G H I* L1 N N1 P Q S T U V Z1 Z2 Z3 RGS MOTORIZED () mm (0.8) 20.3 (1.6) 40.6 (1.6) 40.6 (1.06) 26.9 (2.7) 68.6 (1.75) 44.5 (1.0) 25.4 10-24 UNC (1.0) 25.4 (0.625) 15.9 (1.5) 38.1 (1.25) 15.9 (1.0) 25.4 (0.74) 18.8 (0.3) 7.6 (0.51) 12.9 (1.47) 37.3 (0.2) 5.1 (0.33) 8.4 (0.19) 4.8 * Metric threads aso avaiabe for carriage. 229

RGS08 Non-Motorized Linear Rais With Guide Screw RGS08 Non-Motorized Linear Rais Non-motorized RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGS08 non-motorized with drive screw Identifying the Non-Motorized RGS part number codes when ordering RG S 08 K A 0200 XXX Prefix RG = Rapid Guide Screw Frame Stye S = Standard Frame Size Load Standard products avaiabe 24-hrs. 08 = 50 bs (222 N) (Maximum static oad) NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Drive / Mounting A = None Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Thread Lead Code 0000 = No screw 0100 =.100-in (2.54) 0200 =.200-in (5.08) 0500 =.500-in 1000 = 1.000-in (25.4) Unique Identifier Suffix used to identify specific features or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. RGS08 Screw-Driven STANDARD Series inear rai WITHOUT MOTOR Specifications Inch Lead Thread Lead Code Rai Diam. Screw Diam. Typica Drag Torque oz - in (N-m) Life @ 1/4 Design Load* (cm) Torque-to- Move Load* oz-in/b (N-m/Kg) Design Load* bs (N) Screw Inertia oz-in sec 2 /in (KgM 2 /M) RGS NON-MOTORIZED RGS08 Non- Motorized with Guide Screw.100 (2.54).200 (5.08).500 1.000 (25.40) 0100 0200 0500 1000 0.8 (20.3) 0.8 (20.3) 0.8 (20.3) 0.8 (20.3) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 5.0 (.04) 6.0 (.04) 7.0 (.05) 8.0 (.06) NOTE: RGS assembies with engths over 36-in. (914.4 mm) and/or eads higher than.5-in (12.7 mm) wi ikey have higher drag torque than isted vaues. 1.1 (.018) 1.7 (.027) 3.0 (.047) 6.0 (.096) 50 (222) 50 (222) 50 (222) 50 (222) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) * Determined with oad in a horizonta position 230

RGS08 Non-Motorized Linear Rais Drawings With and Without Guide Screw Dimensiona Drawings: RGS08 Screw-Driven inear rai WITHOUT Motor STANDARD Series Recommended for horizonta oads up to 50 bs (222 N) N +.0000.0005 (+0.0 0.013) Dimensions = es A B C D D1 E F G H I* K L1 L2 N RGS08.80 (20.3) 1.50 (38.1).2500 (6.350) 1.60 (40.6) 1.60 (40.6) 1.06 (26.9) 2.7 (69) 1.750 (44.45) 1.000 (25.4) 10-24 UNC 1.3 (33) 1.09 (27.7).77 (19.6).625 (15.88) RGS08 P Q R S T U V X Y Z1 Z2 Z3 1.250 (31.75) 1.00 (25.4) 1.04 (26.4).74 (18.8).30 (7.6).51 (13.0) 1.47 (37.3).70 (17.8).220 (5.59).20 (5.1).33 (8.4).19 (4.8) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 Dimensiona Drawings: RGS08 WITHOUT motor and WITHOUT Guide Screw STANDARD Series Recommended for horizonta oads up to 50 bs (222 N) Dimensions = es RGS08 A D D1 E F G H.80 (20.3) 1.60 (40.6) 1.60 (40.6) 1.06 (26.9) 2.7 (69) 1.750 (44.45) 1.00 (25.4) I* 10-24 UNC N P Q S T U V.625 (15.88) 1.250 (31.75) 1.0 (25.4).74 (18.8).30 (7.6).51 (13.0) 1.47 (37.3) Z1.20 (5.1) Z2.33 (8.38) Z3.19 (4.82) RGS NON-MOTORIZED * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 231

RGS10 and RGW10 Motorized Linear Rais 57000 Series Size 23 Singe/Doube Stack RGS10 Standard and RGW10 Wide Series Linear Rai with Hybrid 57000 Series Size 23 Linear Actuator Stepper Motors Driven by a Size 23 Hybrid motor, the 25.4 mm (1-) diameter spined carriage guide has been designed to carry a weight oad up to 100 bs (445 N). A high performance motion contro system combines power and precison. The system combines many Haydon Kerk Motion Soutions patented motion technoogies into a singe integrated, inear motion contro system. The Motorized RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. Hybrid Motor Specifications: 57000 Series Size 23 Singe Stack See page 106 57000 Series Size 23 Doube Stack See page 111 To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGW10 57000 Series Size 23 Doube Stack Identifying the Motorized RGS part number codes when ordering RG S 10 K M 0100 XXX RGS MOTORIZED Prefix RG = Rapid Guide Screw Frame Stye S = Standard W = Wide sensor mount capabiity Frame Size Load 10 = 100 bs (445 N) (Maximum static oad) Standard products avaiabe 24-hrs. Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease Drive / Mounting M = Motorized Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Thread Lead Code 0100 =.100-in (2.54) 0125 =.125-in (3.18) 0200 =.200-in (5.08) 0250 =.250-in (6.35) 0315 =.315-in (8.00) 0500 =.500-in 0630 =.630-in (16.00) 1000 = 1.000-in (25.4) 1500 = 1.500-in (38.10) 2000 = 2.000-in (50.80) Unique Identifier Suffix used to identify specific motors (57000 Singe/ Doube Stack or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. 232

RGS10 and RGW10 Motorized Linear Rais 57000 Series Dimensiona Drawings RGS10 STANDARD Series with 57000 Series Size 23 Singe and Doube Stack Recommended for horizonta oads up to 100 bs (445 N) Dimensions = (es) mm A D D1 E F () (1.0) (2.0) ((2.0) (1.32) (3.3) mm 25.4 50.8 50.8 33.5 83.8 * Metric threads aso avaiabe for carriage. G (2.25) 57.1 H (1.25) 31.7 I* 1/4-20 UNC L1 (1.0) 25.4 RGW10 WIDE Series with 57000 Series Size 23 Singe and Doube Stack Recommended for horizonta oads up to 100 bs (445 N) N (0.75) 19.0 N1 (2.054) 52.2 P (1.5) 38.1 Q (1.25) 37.1 S (0.92) 23.4 T (0.375) 9.53 U (0.64) 16.3 V (1.83) 46.5 Z1 (0.26) 6.6 Z2 Z3 (0.5) (0.22) 12.7 5.6 Dimensions = (es) mm () mm A (1.0) 25.4 D (3.38) 85.9 D1 (2.0) 50.8 F (3.3) 83.8 G (2.25) 57.1 * Metric threads aso avaiabe for carriage. H (1.25) 31.7 I* 1/4-20 UNC L1 (1.0) 25.4 N (0.75) 19.0 RGW10 Sensor Mount Kit Part No. RGW10SK Sensor mounting kits, based on a U-channe optica sensor, are avaiabe for the RGW Series. Each kit incudes one fag, three sensor mounts, and a mounting hardware. Sensors are not incuded in the kit and must be ordered separatey from the sensor manufacturer. P (2.6) 66.0 Q (1.56) 39.6 S (1.22) 31.0 T (0.69) 17.5 U (1.33) 33.8 V (2.15) 54.6 Z1 (0.26) 6.6 Z2 (0.4) 10.2 Z3 (0.43) 10.9 FLAG mounts to side of carriage SENSOR MOUNT inserts into sot of RGW base RGS MOTORIZED 233

RGS10 and RGW10 Non-Motorized Linear Rais With and Without Guide Screw RGS10 Non-Motorized Linear Rais Non-motorized RGS inear rais feature standard wear-compensating, anti-backash driven carriages to insure repeatabe and accurate positioning. A moving surfaces incude Kerkite engineered poymers running on Kerkote TFE coating, providing a strong, stabe patform for a variety of inear motion appications. To determine what is best for your appication see the Linear Rai Appications Checkist on page 203. RGW10 non-motorized with drive screw, sensor mount, and motor mount Identifying the Non-Motorized RGS part number codes when ordering RG S 10 K A 0500 XXX RGS NON-MOTORIZED Prefix RG = Rapid Guide Screw Frame Stye S = Standard W = Wide sensor mount capabiity Frame Size Load 10 = 100bs (445 N) (Maximum static oad) Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Standard products avaiabe 24-hrs. Coating K = TFE Kerkote X = Specia (exampe: Kerkote with grease NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. Drive / Mounting A = None B = In-ine screw motor mount Thread Lead Code 0000 = No screw 0100 =.100-in (2.54) 0200 =.200-in (5.08) 0500 =.500-in 1000 = 1.000-in (25.4) Unique Identifier Suffix used to identify specific features or a proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. 234

RGS10 Non-Motorized Linear Rais With Guide Screw RGS10 Screw-Driven inear rai WITHOUT MOTOR STANDARD Series Specifications Inch Lead Thread Lead Code Rai Diam. Screw Diam. Typica Drag Torque oz - in (N-m) Life @ 1/4 Design Load* (cm) Torque-to- Move Load* oz-in/b (N-m/Kg) Design Load* bs (N) Screw Inertia oz-in sec 2 /in (KgM 2 /M) RGS10 Non- Motorized with Guide Screw.100 (2.54).200 (5.08).500 1.000 (25.40) 0100 0200 0500 1000 1.0 (25.4) 1.0 (25.4) 1.0 (25.4) 1.0 (25.4) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5.0 (.04) 6.5 (.05) 7.0 (.05) 8.5 (.06) NOTE: RGS assembies with engths over 36-in. (914.4 mm) and/or eads higher than.5-in (12.7 mm) wi ikey have higher drag torque than isted vaues. * Determined with oad in a horizonta position 1.3 (.020) 2.0 (.031) 3.0 (.047) 6.5 (.101) 100 (445) 100 (445) 100 (445) 100 (445) 14.2 x 10-5 (3.9 x 10-5 ) 14.2 x 10-5 (3.9 x 10-5 ) 14.2 x 10-5 (3.9 x 10-5 ) 14.2 x 10-5 (3.9 x 10-5 ) Dimensiona Drawings: RGS10 Screw-Driven inear rai WITHOUT MOTOR STANDARD Series Recommended for horizonta oads up to 100 bs (445 N) Dimensions = es N +.0000.0005 (+0.0 0.013) RGS10 RGS10 A B C D D1 E F G H 1.00 (25.4) 1.75 (44.5).3125 (7.938) 2.00 (50.8) 2.00 (50.8) 1.32 (33.5) I* K L1 L2 P Q R S T U V X Y Z1 Z2 Z3 1.500 (38.10) 1.25 (31.8) 1.30 (33.0).92 (23.4).375 (9.5).64 (16.3) 3.3 (83) 1.83 (46.5) 2.250 (57.15).88 (22.4) 1.250 (31.8).280 (7.11) 1/4-20 UNC.26 (6.6) 1.6 (41).50 (12.7) 1.30 (33.0).22 (5.6).30 (33.0) N.750 (19.05) RGS NON-MOTORIZED * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 235

RGW10 Wide Non-Motorized Linear Rais with Guide Screw Drawings Dimensiona Drawings: RGW10 WIDE Series Screw-Driven inear rai WITHOUT MOTOR Recommended for horizonta oads up to 100 bs (445 N) Dimensions = es A B C D D1 F G H I* K L1 L2 N RGW10 1.00 (25.4) 1.75 (44.5).3125 (7.938) 3.38 (85.7) 2.00 (50.8) 3.3 (83) 2.250 (57.15) 1.250 (31.75) 1/4-20 (UNC) 1.9 (48) 1.30 (33.0) 1.30 (33.0).750 (19.05) RGW10 P Q S T U V X Y Z1 Z2 Z3 2.600 (66.04) 1.56 (39.6) 1.22 (31.0).69 (17.5) 1.33 (33.8) 2.15 (54.6).88 (22.4).280 (7.11).26 (6.6).40 (10.2).43 (10.9) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 MOTOR MOUNT for RGW10 WIDE Series Screw-Driven inear rai WITHOUT MOTOR * Dimensions = es * NOTE: The couping shown in the Dimensiona Drawing is not incuded. A D D1 D2 F G H I* L1 L2 L3 N N1 RGW10 1.00 (25.4) 3.38 (85.7) 2.00 (50.8) 2.22 (56.4) 3.3 (83) 2.250 (57.15) 1.250 (31.75) 1/4-20 UNC 1.30 (33.0) 2.16 (54.9).50 (12.7).750 (19.05) 1.50 (38.1) RGS NON-MOTORIZED RGW10 P Q S T U V V1 Z1 Z2 Z3 2.600 (66.04) 1.56 (39.6) 1.22 (31.0).69 (17.5) 1.33 (33.8) 2.15 (54.6) 2.34 (59.3).26 (6.6).40 (10.2).43 (10.9) RGW10 Sensor Mount Kit Part No. RGW10SK Sensor mounting kits, based on a U-channe optica sensor, are avaiabe for the RGW Series. Each kit incudes one fag, three sensor mounts, and a mounting hardware. Sensors are not incuded in the kit and must be ordered separatey from the sensor manufacturer. 236 * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 FLAG mounts to side of carriage SENSOR MOUNT inserts into sot of RGW base

RGS10 and RGW10 Non-Motorized Linear Rais Without Guide Screw Dimensiona Drawings: RGS10 WITHOUT motor and WITHOUT Guide Screw STANDARD Series Recommended for horizonta oads up to 100 bs (445 N) Dimensions = es A D D1 E F G H I* N P Q S T U V Z1 Z2 Z3 RGS10 1.00 (25.4) 2.00 (50.8) 2.00 (50.8) 1.32 (33.5) 3.3 (83) 2.250 (57.15) 1.250 (31.75) * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 1/4-20 UNC.750 (19.05) 1.500 (38.10) 1.25 (31.8).92 (23.4).375 (9.5).64 (16.3) 1.83 (46.5).26 (6.6).50 (12.7).22 (5.6) Dimensiona Drawings: RGW10 WITHOUT motor and WITHOUT Guide Screw WIDE Series Recommended for horizonta oads up to 100 bs (445 N) Dimensions = es RGW10 1.00 (25.4) A D D1 F G H 3.38 (85.7) 2.00 (50.8) 3.3 (83) 2.250 (57.15) 1.250 (31.75 I* 1/4-20 UNC N P Q S T U V Z1 Z2 Z3.750 (19.05 2.600 (66.04) 1.56 (39.6) 1.22 (31).69 (17.5) 1.33 (33.8) 2.15 (54.6).26 (6.6).40 (10.2).43 (10.9) RGS NON-MOTORIZED * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 237

WGS06 Motorized Low Profie Linear Rais 43000 Series Size 17 Singe/Doube Stack WGS MOTORIZED WGS06 Linear Rai with Hybrid 43000 Series Size 17 Singe and Doube Stacks and 57000 Series Size 23 Singe and Doube Stacks Kerk Motorized WGS Linear Side utiizes a screw-driven carriage that offers reiabe, continuous inear speed whie maintaining accurate positioning. The ength and speed of the WGS is not imited by critica screw speed, aowing high RPM, inear speed and ong stroke engths. The WGS side has a unique, compact profie that provides improved torsiona stiffness and stabiity over RGS and RGW products. Hybrid Motor Specifications: 43000 Series Size 17 Singe Stack See page 95 43000 Series Size 17 Doube Stack See page 102 43000 Series Size 17 IDEA Drive See page 100 Programmabe IDEA Drive See page 194 57000 Series Size 23 Singe Stack See page 106 57000 Series Size 23 Doube Stack See page 111 Integrated Connector Option See page 117 To determine which motor assemby is best for your appication see the Linear Rai Appications Checkist on page 203. WGS06 with Size 17 [43 mm] hybrid inear stepper motor and WGS06 with Size 17 [43 mm] with an optiona PC programmabe IDEA Drive (not avaiabe for Size 23 motor) Identifying the Motorized WGS part number codes when ordering WG S 06 K G 0100 XXX Prefix WG =Wide Guide Screw Frame Stye S = Standard Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Frame Size Load* 06 = Max. static oad 35 bs (156 N) NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 203 756 7441. Coating K = TFE wear resist, dry ubricant Kerkote X = Specia coating, (Exampe: Kerkote with grease) Drive / Mounting M = Motorized G = IDEA integrated programmabe drive - USB communications J = IDEA integrated programmabe drive - RS485 communications Thread Lead Code 0100 = 0.1-in (2.54) 0200 = 0.2-in (5.08) 0500 = 0.5-in (12.7) 1000 = 1.0-in (25.4) Unique Identifier M43 = 43000 Series Size 17 Motor G43 = 43000 Series Size 17 Motor with IDEA Drive M57 = 57000 Series Size 23 Motor Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. 238

WGS06 Motorized Low Profie Linear Rais 43000 Series Dimensiona Drawings WGS06 Motorized Seector Chart Motorized with Size 17 and Size 23 Singe and Doube Stack Hybrid Linear Actuator Stepper Motors WGS MOTORIZED Inch Lead 0.050 (1.27) 0.079 (2.00) 0.100 (2.54) 0.157 (4.00) 0.197 (5.00) 0.200 (5.08) 0.250 (6.35) 0.375 (9.53) 0.400 (10.16) (12.00) 0.472 0.500 0.750 (19.05) (25.00) 0.984 1.000 (25.40) 1.200 (30.48) Thread Lead Code 0050 0079 0100 0157 0197 0200 0250 0375 0400 0472 0500 0750 0984 1000 1200 WGS06 Low Profie Linear Side with Hybrid 43000 Size 17 Singe and Doube Stack inear motors Recommended for horizonta oads up to 35 bs (156 N) Dimensions = (es) mm M N ADDITIONAL MOUNTING HOLES RECOMMENDED EVERY 10 es (254mm) FROM DRIVE END. CONTACT HAYDON KERK FOR EXACT LOCATIONS OR CUSTOM LOCATIONS. L R K J S 2X SINGLE STACK B DOUBLE STACK C P1 THRU P2 P3 D E Q 4X 8-32 UNC - 2B*.250 F OVERALL RAIL LENGTH = STROKE + D + F + G U TYP. G P1 THRU P2 P3 TYP. (MM) INCH -M43 SIZE 17 A T (42.2) 1.660 MAX. (33.8) 1.330 MAX. I (47.75) 1.880 MAX. H (24.9).98 (27.9) 1.1 (63.5) 2.50 (11.2).44 (9.7).38 (6.4).250 (50.8) 2.00 * METRIC THREADS ALSO AVAILABLE A B C D E F G H I J K L M N P1 P2 P3 Q R S T U * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 (25.4) (19.1) (38.1) (25.4) (3.81) (6.60) (6.50) (53.95) (41.25) (50.8) (23.3) (2.3) 1.000.75 1.50 1.000.150.260.256 2.124 1.624 2.00.92.090 239

WGS06 Motorized Low Profie Linear Rais 43000 Series and 57000 Series Drawings WGS MOTORIZED WGS06 Low Profie Linear Side with Hybrid 43000 Size 17 Singe and Doube Stack inear motors with programmabe IDEA Drive Recommended for horizonta oads up to 35 bs (156 N) Wiring Winding Votage Bipoar 2.33 VDC M N ADDITIONAL MOUNTING HOLES RECOMMENDED EVERY 10 es (254mm) FROM DRIVE END. CONTACT HAYDON KERK FOR EXACT LOCATIONS OR CUSTOM LOCATIONS. R L Contact Haydon Kerk if a higher votage motor is desired. K J S 2X SINGLE STACK B DOUBLE STACK C P1 THRU Q 4X 8-32 UNC - 2B* P1 THRU P2 P3.250 P2 P3 TYP. U D E OVERALL RAIL LENGTH = STROKE + D + F + G F TYP. G A H T V Dimensions = I * METRIC THREADS ALSO AVAILABLE (MM) INCH A B C D E F G H I J K L M N P1 P2 P3 Q R S T U V (58.0) (63.72) (77.67) (24.9) (27.9) (63.5) (11.2) (9.7) (6.4) (50.8) (25.4) (19.1) (38.1) (25.4) (3.81) (6.60) (6.50) (53.95) (41.25) (50.8) (23.3) (2.3) (42.0) -G43 2.283 2.509 3.058.98 1.1 2.50.44.38.250 2.00 1.000.75 1.50 1.000.150.260.256 2.124 1.624 2.00.92.090 1.66 SIZE 17 MAX. MAX. MAX. * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 WGS06 Low Profie Linear Side with Hybrid 57000 Size 23 Singe and Doube Stack inear motors Recommended for horizonta oads up to 35 bs (156 N) M N ADDITIONAL MOUNTING HOLES RECOMMENDED EVERY 10 es (254mm) FROM DRIVE END. CONTACT HAYDON KERK FOR EXACT LOCATIONS OR CUSTOM LOCATIONS. R L K J S 2X P1 THRU Q 4X 8-32 UNC - 2B* P1 THRU P2 P3.250 P2 P3 TYP. SINGLE STACK B OVERALL RAIL LENGTH = STROKE + D + F + G DOUBLE STACK C D E F U TYP. G A T H Dimensions = (MM) INCH -M57 SIZE 23 (56.4) 2.220 MAX. I (45.2) 1.780 MAX. (66) (24.9) (27.9) (63.5) (11.2) (16.5) (6.4) 2.598.98 1.1 2.50.44.65.250 MAX. (50.8) 2.00 * METRIC THREADS ALSO AVAILABLE A B C D E F G H I J K L M N P1 P2 P3 Q R S T U (25.4) (19.1) (38.1) (25.4) (3.81) (6.60) (6.50) (53.95) (41.25) (56.4) (23.3) (2.3) 1.000.75 1.50 1.000.150.260.256 2.124 1.624 2.220.92.090 MAX. * Metric carriage hoe sizes avaiabe: M3, M4, M5 and M6 240

WGS Non-Motorized Linear Rai for improved torsiona stiffness and inear motion stabiity Kerk Non-Motorized WGS Linear Side utiizes siding pane bearings on a ow profie auminum guide rai that keeps the motion smooth throughout the trave distance. The ead-screw is precision-made of high-quaity stainess stee and a moving surfaces incude Kerkite high performance poymers running on Kerkote TFE coating. WGS06 Non-Motorized Low Profie Linear Rais with Guide Screws WGS NON-MOTORIZED The integra mounting base can provide support over the entire ength that can extend up to 8 feet (2.4 meters). Longer engths are possibe on a specia order basis. The sides come with a wear-compensating, anti-backash driven carriage. Additiona driven or passive carriages can be added, aong with appication specific customization. Linear guides, without the drive screw, are aso avaiabe. WGS06 - B57 with 2.2 (55.9 mm) square motor mount for 57000 Series, Size 23 Hybrid motors To determine which motor assemby is best for your appication see the Linear Rai Appications Checkist on page 203. Identifying the Non-Motorized WGS part number codes when ordering WG S 06 K G 0100 A00 Prefix WG = Wide Guide Screw Frame Stye S = Standard Frame Size Load* 06 = Max. static oad 35 bs (156 N) NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 203 756 7441. Coating K = TFE wear resist, dry ubricant Kerkote X = Specia coating, (Exampe: Kerkote with grease) Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Standard products avaiabe 24-hrs. 241 Drive / Mounting A = None B = In-ine motor mount Thread Lead Code 0050 = 0.05-in (1.27) 0079 = 0.079-in (2.0) 0157 = 0.157-in (4.0) 0197 = 0.197-in (5.0) 0250 = 0.25-in (6.35) 0375 = 0.375-in (9.53) 0400 = 0.40-in (10.16) 0472 = 0.472--in (12.0) 0750 = 0.75-in (19.05) 0984 = 0.984-in (25.0) 0100 = 0.1-in (2.54) 0200 = 0.2-in (5.08) 0500 = 0.5-in (12.7) 1000 = 1.0-in (25.4) 1200 = 1.20-in (30.48) Unique Identifier A00 = Without Motor Mount B43 = Motor Mount for Size 17 B57 = Motor Mount for Size 23 Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part.

WGS NON-MOTORIZED WGS06 Non-Motorized Low Profie Linear Rais with Guide Screws WGS Non-Motorized Product Seector Chart WGS Inch Lead**.100 (2.54).200 (5.08).500 1.000 (25.40) Thread Lead Code 0100 0200 0500 1000 Screw Diam. 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) Typica Drag Torque oz - in (N-m) 4.0 (.03) 5.0 (.04) 6.0 (.04) 7.0 (.05) Life @ 1/4 Design Load* Torque-to-Move (cm) Load oz-in/b (N-m/Kg) 1.0 (.016) 1.5 (.023) 2.5 (.039) 4.5 (.070) Design Load bs (N) 35 (156) 35 (156) 35 (156) 35 (156) Screw Inertia oz-in-sec 2 /in (kg-m-sec 2 /m) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) 1.5 x 10-5 (4.2 x 10-6 ) NOTE: WGS assembies with engths over 36 es (914.4 mm) and/or eads higher than.5 (12.7 mm) wi ikey have higher drag torque than isted vaues. * Determined with oad in a horizonta position ** Other and metric eads avaiabe. Inch Lead Thread Lead Code 0.050 (1.27) 0.079 (2.00) 0.157 (4.00) 0.197 (5.00) 0.250 (6.35) 0.375 (9.53) 0.400 (10.16) 0.472 (12.00) 0.750 (19.05) 0.984 (25.00) 1.200 (30.48) 0050 0079 0157 0197 0250 0375 0400 0472 0750 0984 1200 Dimensiona Drawings: WGS Motor Mounts for 43000 Series, Size 17, and 57000 Series, Size 23 Hybrid Linear Actuator Motors Dimensions = [ mm ] I L O ADDITIONAL MOUNTING HOLES RECOMMENDED EVERY 10 es (254mm) FROM DRIVE END. CONTACT HAYDON KERK FOR EXACT LOCATIONS OR CUSTOM LOCATIONS. P +.0 M 0.013 +.0000** M.0005 K K S R 2X Q1 THRU ALL Q2 Q3 N 4X #8-32 UNC*.250 [ 6.35 ] T TYPICAL Q1 THRU Q2 Q3 TYPICAL [J±0.08] J±.003 D OVERALL LENGTH = STROKE + F + D + G F E G 45 TYP H +.002.000 U THRU 4X A B C 4X W V1 THRU ALL V2 V3 [J±0.08] J±.003 -B43 -B57 A 1.66 [42.2] 2.20 [55.9] B.25 [6.4] C.38 [9.7] D 2.67.65 [67.8] [16.5] E 1.1 [28] F G H 2.50.44.866 [22] [63.5] [11.2] 1.503 [38.18] I 2.60 [66] J 1.222 [31.04] 1.000 1.856 [25.4] [47.14] K L.39 [9.9] M** 242 N 0 P Q1 Q2 Q3 R S 2.00.1875 1.624 2.124.75.150.260 [50.8].256 2.00 [4.763] [41.25] [53.95] [19.05] [3.81] [6.60] [6.50] 2.20 [50.8] [55.9] * METRIC THREADS ALSO AVAILABLE **MAXIMUM COUPLING SIZE =.846 (21.49 mm) DIAMETER X 1.25 es (31.8 mm) LENGTH T.09 [2.3] U V1 V2 V3.136.240.128 [3.45] [6.09] [3.25] #8-32 UNC W.92 [23.3]

WGS Performance ANGULAR DEFLECTION (DEGREES) 0.5 0.45 0.4 0.35 0.3 0.25 WGS Standard Series WGS06 Non-Motorized Low Profie Linear Rais with Guide Screws RGW vs WGS with 1,000,000 es [2,540,000 cm] Trave (Ro Moment Defection*) RGW *Typica vaues based on static measurement. Resuts may vary due to appication specific parameters. 0.2 1,000,000 es 0.15 [2,540,000 cm] WGS trave performed 0.1 with 6.5 in-b [0.73 0.05 Nm] ro moment on carriage. 0 0 5 [0.56] 10 [1.13] 15 [1.69] 20 [2.26] 25 [2.82] 30 [3.39] 35 [3.95] 40 [4.52] MOMENT LOAD: in-bs [Nm] WGS NON-MOTORIZED The Wide Guide Screw utiizes siding pane bearings on a dovetaied auminum guide rai. The pane bearings, made of Kerkite high performance poymers, act as gibs securey mating the carriage to the Kerkote TFE coated rai. This design reduces ro moment defection of the carriage when compared to the RGS and RGW products. Recommended horizonta oads: WGS06 up to 156 N (35 bs) WGS06 - A00 Standard WGS Standard Series Dimensiona Drawings Dimensions = [ mm ] I +.0 J 0.01 +.0000 J.0005 K F L ADDITIONAL MOUNTING HOLES RECOMMENDED EVERY 10 es (254mm) FROM DRIVE END. CONTACT HAYDON KERK FOR EXACT LOCATIONS OR CUSTOM LOCATIONS. G F TYP E H A 2X P1 THRU ALL P2 P3 B M N* 4X OVERALL LENGTH = STROKE + A + B + D C O D 2X P1 THRU ALL P2 P3 Q R -A00 A 1.04 [26.4] B 2.50 [63.5] C 1.1 [28] D.44 [11.2] E 2.00 [50.8] F 1.000 [25.40] G.75 [19.1] H.63 [16] I.39 [9.9] J.1875 [4.763] K 1.220 [39.99] L 2.124 [53.95] M 1.624 [41.25] N* #8-32 UNC-2B 0.09 [2.3] P1.150 [3.81] P2.260 [6.60] P3.256 [6.50] Q.45 [11.4] R.92 [23.3] * METRIC THREADS ALSO AVAILABLE 243

LRS Linear Rai Systems 43000 Series Size 17 Motorized and Non-Motorized LRS MOTORIZED LRS Linear Rai Systems avaiabe with a Haydon Hybrid 43000 Series Size 17 singe and doube stack inear actuator stepper motor or as a non-motorized inear rai The LRS Linear Rai System in a variety of configurations, both motorized and non-motorized. These precision inear rai systems consist of a stationary base and a oad bearing carriage that traves aong a rigid extruded auminum rai. The LRS Linear Rai System is avaiabe with severa in-ine motor options incuding a singe stack or doube stack size 17 stepper motor, a stepper motor with an integra chopper drive, or the IDEA programmabe inear actuator, consisting of the stepper motor, drive, and controer programmed through a graphic user interface (GUI). The LRS is aso avaiabe without a motor, easiy aowing the designer fexibiity to integrate with a variety of motor types and bet and puey configurations. Key Product Features T sots integrated into exterior rai bottom and sides that accommodate fu ength support and various mounting options. Loads easiy attach to the compact, moving carriage with four or six M4 x 0.7 size screws. Load bearing carriage moves efficienty and smoothy within the interna rai geometry of this speciay designed auminum extrusion. Rai provides end-to-end axia stabiity and precise motion system accuracy. Automatic adjustments of side bearing pay with a patent pending anti-backash inear bearing. Rated ife equas that of the existing ead-screws of simiar size. Lead-screw end configurations adapt to various rotary motion sources. Kerkote or Back Ice TFE coatings on a 303 stainess stee ead-screw. Designed to Metric goba engineering standards. For extreme contro, LRS can be used with CMP or WDG high-precision anti-backash nuts, as we as a freewheeing genera purpose nut. Identifying the LRS part number codes when ordering LRS with Size 17 Doube Stack Hybrid Linear Actuator with IDEA programmabe Drive and Back Ice TFE ead-screw. LRS with Size 17 Doube Stack Hybrid Linear Actuator LRS non-motorized Hybrid Motor Specifications: 43000 Series Size 17 Singe Stack See page 95 43000 Series Size 17 Doube Stack See page 102 43000 Series Size 17 IDEA Drive See page 100 Programmabe IDEA Drive See page 194 LR W 04 B M 0025 XXX Prefix LR = Linear Rai System (LRS) Frame Stye B = BFW nut C = CMP nut W = WDG nut G = Guide ony Carriage hoes avaiabe in Metric sizes M3 M4 M5 M6 Frame Size Load 04 = Max. static oad 50 bs (222 N) Coating S = Uncoated B = Back Ice TFE K = Kerkote TFE N = No screw NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 203 756 7441. Drive / Mounting A = None M = Motorized 43000 Series Size 17 Hybrid G = Motor with IDEA integrated programmabe drive - USB communications J = Motor with IDEA integrated programmabe drive - RS485 communications 244 Thread Lead Code 0000 = No screw 0025 =.25-in (.635) 0031 =.03125-in (.794) 0039 =.0394-in (1.0) 0050 =.05-in (1.27) 0063 =.0625-in (1.588) 0079 =.0787-in (2.0) 0100 =.01-in (2.54) 0125 =.125-in (3.175) 0197 =.1969-in (5.0) 0250 =.25-in (6.35) 0394 =.3937-in (10.0) 0500 =.5-in (12.7) 0750 =.75-in (19.05) 1000 = 1.0-in (25.4) Unique Identifier Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. Standard products avaiabe 24-hrs.

LRS Linear Rai Systems 43000 Series Dimensiona Drawings LRS Linear Rai with Hybrid 43000 Size 17 inear motors Recommended for horizonta oads up to 50 bs (222 N) Specifications Load Ratings (max) Dimensiona Drawing: LRS with 43000 Series Size 17 Width 1-5/8-in square (4.3 cm square) Top Load Z Direction 50 bs (225 N) Length of Stroke (max) 40-in (1000 mm) Hanging / Gantry 50 bs (225 N) Speed (max) 20-in/sec (0.5 M/sec) Max. Pitch Moment 75-in bs (8.5 N M) Straight Line Accuracy +/- 0.012-in/ft (+/- 1.0 mm/m) Max. Max. Moment Ro Moment Yaw 75-in bs (8.5 N M) Twist +/- 0.25 /ft (+/- 0.75 /M) 75-in bs (8.5 N M) LRS MOTORIZED Dimensions = (es) mm Dimensiona Drawing: LRS with 43000 Series Size 17 and IDEA Drive Dimensions = (es) mm LRS Anti-Backash and Freewheeing Nut Assemby Options WDG Series Anti-Backash Assemby For moderate oads. compact design to provide stiffness and baanced accuracy for precise positioning. For more information see page 32. CMP Series Anti-Backash Assemby For ight oads. Sef-ubricating aceta nut; ideay suited for appications using oi or grease. See page 28. 245 BFW Series For appications that do not require anti-backash, ong ife at minima cost. See page 42.

ScrewRais, Spine Shafts and Linear Guide Rais 267

Guides: ScrewRai Linear Actuators Kerk ScrewRai Linear Actuators Linear motion has traditionay required separate components to hande both drive and support/ guidance. The compact Kerk ScrewRai combines both functions in a singe, coaxia component. By eiminating the need for externa rai-to-screw aignment, the ScrewRai simpifies the design, manufacture and assemby of motion systems. The ScrewRai s coaxia design saves as much as 80% of the space used by a two-rai system and is generay ess expensive than the equivaent components purchased separatey. The savings can be substantia due to ower component costs and reduced abor. An added benefit is the abiity to get three-dimensiona motion from a singe ScrewRai. SCREWRAIL GUIDE SCREW LINEAR ACTUATORS The ScrewRai consists of a precision roed ead-screw, supported by seaed bearings and contained within a concentric stee guide rai, driving an integrated nut/bushing. Because a the aignment requirements are achieved within the ScrewRai, support and positioning of the ScrewRai is much ess critica than with traditiona side assembies. Kerkote TFE coating and sef-ubricating nut/bushing materias ensure ong ife without maintenance. Z-Theta ScrewRai Assemby When mounted verticay, the ScrewRai can be used to simutaneousy ift and rotate (Z-theta motion). With one motor driving the screw and a second rotating the rai, a compact, sef-supporting pick and pace mechanism can be created. 247

Guides: ScrewRai Linear Actuators Part Number Identification Identifying the Kerk ScrewRai part number codes when ordering Standard products avaiabe 24-hrs. SR Z 06 K A 0100 XXX SCREWRAIL GUIDE SCREW LINEAR ACTUATORS Prefix SR = ScrewRai Nut Stye A = freewheeing stye nut Z = Anti- Backash Nut Rai Diam. 03 = 3/8-in (10 mm) 04* = 1/2-in (13 mm) 06* = 3/4-in (19 mm) 08* = 1-in (25 mm) * END SUPPORTS avaiabe, see page 251. Coating S = Uncoated K = Kerkote Drive Mounting A = None Thread Lead Code SRA/SRZ03: 0050 =.050-in (1.27) 0100 =.100-in (2.54) 0250 =.250-in (6.35) 0375 =.375-in (9.53) SRA/SRZ04: 0050 =.050-in (1.27) 0250 =.250-in (6.35) 0500 =.500-in (12.7) 1000 = 1.00-in (25.40) SRA/SRZ06: 0100 =.100-in (2.54) 0200 =.200-in (5.08) 0500 =.500-in (12.7) 1000 = 1.00-in (25.40) SRA/SRZ08: 0100 =.100-in (2.54) 0200 =.200-in (5.08) 0500 =.500-in (12.7) 1000 = 1.00-in (25.40) Unique Identifier Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. Note: Righthand/Left-hand ScrewRai assembies are aso avaiabe. Identifying the Kerk ScrewRai End Support part number codes when ordering SR 06 ES Z00 Prefix: SR = ScrewRai Size 04= 1/2-in 06= 3/4-in 08= 1-in ES = End Support Identifier = Standard NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. 248

Guides: ScrewRai Linear Actuators SRA: Genera Purpose Assemby Kerk SRA Series Genera Purpose ScrewRai Linear Actuators A standard nut for genera appications where anti-backash compensation is not required. The SRA is recommended anywhere ow drag and minima free pay is required. Note: Right-hand/Left-hand ScrewRai assembies are aso avaiabe. ScrewRai : SRA Series Genera Purpose SRA 03 SRA 04 SRA 06 SRA 08 A Diam..364/.367 (9.24/9.32).489/.492 (12.42/12.5).739/.742 (18.77/18.85).989/.992 (25.12/25.2) B.38 (9.56) 0.62 (15.75) 0.75 (19.05) 0.75 (19.05) C Diam..1245/.1250 (3.16/3.18).1870/.1875 (4.75/4.76).2490/.2495 (6.33/6.34).2490/.2495 (6.33/6.34) D Diam..98 (24.9) 1.25 (31.8) 1.75 (44.5) 2.23 (56.6) E F G Diam. 1.0 (25.4) 1.4 (36) 2.0 (51) 2.5 (64).28 (7.2).38 (9.5).50 (12.7).63 (15.9).562 (14.3).750 (19.1) 1.120 (28.4) 1.495 (38.0) H(B.C.D.).75 (19.1) 1.03 (26.2) 1.48 (37.6) 1.92 (48.8) I.094 (2.39) 0.140 (3.56) 0.173 (4.39) 0.200 (5.08) L1.37 (9.4) 0.26 (6.6) 0.38 (9.7) 0.48 (12.2) L2.38 (9.66) 0.36 (9.1) 0.70 (17.8) 0.77 (19.6) SCREWRAIL GUIDE SCREW LINEAR ACTUATORS 249

Guides: ScrewRai Linear Actuators SRZ: Anti-Backash Assemby Kerk SRZ Series Anti-Backash ScrewRai Linear Actuators A nut designed and manufactured with our unique axia take-up mechanism providing continuous sef-adjusting anti-backash compensation. Note: Right-hand/Left-hand ScrewRai assembies are aso avaiabe. SCREWRAIL GUIDE SCREW LINEAR ACTUATORS ScrewRai : SRZ Series Anti-Backash SRZ 03 SRZ 04 SRZ 06 SRZ 08 A Diam..364/.367 (9.24/9.32).489/.492 (12.42/12.5).739/.742 (18.77/18.85).989/.992 (25.12/25.2) B.38 (9.56) 0.62 (15.75) 0.75 (19.05) 0.75 (19.05) C Diam..1245/.1250 (3.16/3.18).1870/.1875 (4.75/4.76).2490/.2495 (6.33/6.34).2490/.2495 (6.33/6.34) D Diam..98 (24.9) 1.31 (33.3) 1.81 (46.0) 2.30 (58.4) E F G Diam. 1.1 (27.94) 1.4 (36) 2.0 (51) 2.5 (64).28 (7.2).38 (9.5).50 (12.7).63 (15.9).73 (18.5).097 (24.7) 1.38 (35.1) 1.72 (43.7) H(B.C.D.) I (Brass Inserts).75 (19.05) 1.03 (26.2) 1.48 (37.6) 1.92 (48.8) #2-56 ( * ) #6-32 ( * ) #10-32 ( * ) #10-32 ( * ) L1.37 (9.4) 0.26 (6.6) 0.38 (9.7) 0.48 (12.2) L2.38 (9.66) 0.36 (9.1) 0.70 (17.8) 0.77 (19.6) * metric avaiabe as requested 250

Guides: ScrewRai Linear Actuators End Supports ScrewRai Linear Actuators: End Supports As an additiona option for a Kerk ScrewRais, standard End Supports offer the convenience of simpe and compact mounting for the ScrewRai. The End Supports are designed to side over the outside diameter of each end of the rai and key off the sot in the ScrewRai. The Kerkite composite poymer End Supports come standard with three hex nuts that are captured in the fange for easy assemby. The End Supports are aso suppied with a brass threaded insert and a set screw to fasten to the outside diameter of the rai. ScrewRai : End Support Styes SRA 04 SRA 06 SRA 08 A Diam..624/.626 (15.85/15.90).749/.751 (19.03/19.08).999/1.001 (25.38/25.43) D 1.35 (34.3) 1.60 (40.6) 2.20 (55.9) F 0.200 (5.08) 0.250 (6.35) 0.375 (9.53) H Diam. 0.150 (3.81) 0.173 (4.39) 0.200 (5.08) L3 0.390 (9.91) 0.603 (15.32) 0.920 (23.37) L4.720 (18.29) 0.900 (22.86) 1.200 (30.48) Q 0.080 (2.03) 0.100 (2.54) 0.125 (3.18) R 0.060 (1.52) 0.100 (2.54) 0.175 (4.45) With the End Supports, the Kerk ScrewRai can be easiy mounted to your assemby. However, if the End Supports are not utiized it is recommended to center the camping force on each end at the L3 dimension as shown in the drawing beow. S #6-32 ( * ) #8-32 ( * ) #10-32 ( * ) T (Hex Nut) 1.03 (26.2) 1.31 (33.3) 1.82 (46.2) U W Diam. (Brass Insert) #8-32 #10-32 #10-32 0.47 (12.0) 0.60 (15.3) 0.82 (20.9) X 0.460 (11.68) 0.594 (15.09) 0.800 (20.32) Y 0.500 0.645 (16.38) 0.820 (20.83) * metric avaiabe as requested SCREWRAIL GUIDE SCREW LINEAR ACTUATORS 251

Guides: ScrewRai Linear Actuators SRA Seector Chart SRA Series Seector Chart ScrewRai Linear Actuators SCREWRAIL GUIDE SCREW LINEAR ACTUATORS ScrewRai SRA 03 SRA 03 SRA 03 SRA 03 SRA 04 SRA 04 SRA 04 SRA 04 SRA 06 SRA 06 SRA 06 SRA 06 SRA 08 SRA 08 SRA 08 SRA 08 Inch Lead **.050 (1.27).100 (2.54).250 (6.35).375 (9.53) 0.050 (1.27) 0.250 (6.35) 0.500 (12.7) 1.000 (25.40) 0.100 (2.54) 0.200 (5.08) 0.500 1.000 (25.4) 0.100 (2.54) 0.200 (5.08) 0.500 1.000 (25.40) Thread Lead Code 0050 0100 0250 0375 0050 0250 0500 1000 0100 0200 0500 1000 0100 0200 0500 1000 Rai Diam. 3/8 (10) 3/8 (10) 3/8 (10) 3/8 (10) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 3/4 (19) 3/4 (19) 3/4 (19) 3/4 (19) 1 (25) 1 (25) 1 (25) 1 (25) Screw Diam. 3/16 (5) 3/16 (5) 3/16 (5) 3/16 (5) 1/4 (6) 1/4 (6) 1/4 (6) 1/4 (6) 3/8 (10) 3/8 (10) 3/8 (10) 3/8 (10) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) Max. Drag Torque oz - in (N-m) 1.5 (0.014) 2.0 (0.018) 2.5 (0.020) 3.0 (0.025) 2.0 (0.015) 3.0 (0.020) 4.0 (0.030) 5.0 (0.040) 3.0 (0.020) 4.0 (0.030) 5.0 (0.040) 6.0 (0.045) 4.0 (0.030) 5.0 (0.040) 6.0 (0.045) 8.0 (0.060) 100 to 150 (250 to 380) 100 to 150 (250 to 380) 100 to 150 (250 to 380) 100 to 150 (250 to 380) 150 to 200 (380 to 500) 150 to 200 (380 to 500) 150 to 200 (380 to 500) 150 to 200 (380 to 500) 180 to 280 (450 to 710) 180 to 280 (450 to 710) 180 to 280 (450 to 710) 180 to 280 (450 to 710) 280 to 320 (710 to 810) 280 to 320 (710 to 810) 280 to 320 (710 to 810) 280 to 320 (710 to 810) Life @ 1/4 Design Loadx10 6 (Non Anti- Backash) (cm) Torque-to- Move Lead oz-in/b (N-m/Kg) 0.5 (0.007) 1.0 (0.016) 1.25 (0.019) 2.0 (0.030) 0.5 (0.007) 1.5 (0.023) 2.5 (0.039) 4.5 (.0.70) 1.0 (0.016) 1.5 (0.023) 2.5 (0.039) 4.5 (0.070) 1.0 (0.016) 1.5 (0.023) 2.5 (0.039) 4.5 (0.070) Design Load bs (Kg) 10 (4.5) 10 (4.5) 10 (4.5) 10 (4.5) 25 (10) 25 (10) 25 (10) 25 (10) 50 (20) 50 (20) 50 (20) 50 (20) 100 (45) 100 (45) 100 (45) 100 (45) Screw Inertia per unit ength oz-in sec 2 /in (KgM 2 /M).1 x 10-5 (.4 x 10-6 ).1 x 10-5 (.4 x 10-6 ).1 x 10-5 (.4 x 10-6 ).1 x 10-5 (.4 x 10-6 ).3 x 10-5 (1.3 x 10-6 ).3 x 10-5 (1.3 x 10-6 ).3 x 10-5 (1.3 x 10-6 ).3 x 10-5 (1.3 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) Equivaent Diam.* 30 (7.6) 30 (7.6) 30 (7.6) 30 (7.6).39 (9.9).39 (9.9).39 (9.9).39 (9.9).60 (15.2).60 (15.2).60 (15.2).60 (15.2).81 (20.5).81 (20.5).81 (20.5).81 (20.5) *ScrewRai stiffness may be modeed using Cassica Beam Defection Theory with equivaent stainess stee beam of diameter given. ** Other eads avaiabe as custom orders. 252

Guides: ScrewRai Linear Actuators SRZ Seector Chart SRZ Series Seector Chart ScrewRai Linear Actuators ScrewRai SRZ 03 SRZ 03 SRZ 03 SRZ 03 SRZ 04 SRZ 04 SRZ 04 SRZ 04 SRZ 06 SRZ 06 SRZ 06 SRZ 06 SRZ 08 SRZ 08 SRZ 08 SRZ 08 Inch Lead **.050 (1.27).100 (2.54).250 (6.35).375 (9.53) 0.050 (1.27) 0.250 (6.35) 0.500 (12.7) 1.000 (25.40) 0.100 (2.54) 0.200 (5.08) 0.500 1.000 (25.4) 0.100 (2.54) 0.200 (5.08) 0.500 1.000 (25.40) Thread Lead Code 0050 0100 0250 0375 0050 0250 0500 1000 0100 0200 0500 1000 0100 0200 0500 1000 Rai Diam. 3/8 (10) 3/8 (10) 3/8 (10) 3/8 (10) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 3/4 (19) 3/4 (19) 3/4 (19) 3/4 (19) 1 (25) 1 (25) 1 (25) 1 (25) Screw Diam. 3/16 (5) 3/16 (5) 3/16 (5) 3/16 (5) 1/4 (6) 1/4 (6) 1/4 (6) 1/4 (6) 3/8 (10) 3/8 (10) 3/8 (10) 3/8 (10) 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) Max. Drag Torque oz - in (N-m) 2.0 (0.014) 2.5 (0.018) 3.0 (0.020) 3.5 (0.025) 3.0 (0.020) 4.0 (0.030) 5.0 (0.040) 6.0 (0.045) 6.0 (0.045) 6.5 (0.047) 7.0 (0.050) 7.5 (0.053) 8.0 (0.057) 8.5 (0.060) 9.0 (0.064) 9.5 (0.067) 50 to 80 (130 to 200) 50 to 80 (130 to 200) 50 to 80 (130 to 200) 50 to 80 (130 to 200) 75 to 100 (190 to 250) 75 to 100 (190 to 250) 75 to 100 (190 to 250) 75 to 100 (190 to 250) 90 to 140 (230 to 350) 90 to 140 (230 to 350) 90 to 140 (230 to 350) 90 to 140 (230 to 350) 120 to 160 (350 to 410) 120 to 160 (350 to 410) 120 to 160 (350 to 410) 120 to 160 (350 to 410) Life @ 1/4 Design Loadx10 6 (Non Anti- Backash) (cm) Torque-to- Move Lead oz-in/b (N-m/Kg) 0.5 (0.007) 1.0 (0.016) 1.25 (0.019) 2.0 (0.030) 0.5 (0.007) 1.5 (0.023) 2.5 (0.039) 4.5 (.0.70) 1.0 (0.016) 1.5 (0.023) 2.5 (0.039) 4.5 (0.070) 1.0 (0.016) 1.5 (0.023) 2.5 (0.039) 4.5 (0.070) Design Load bs (Kg) 10 (4.5) 10 (4.5) 10 (4.5) 10 (4.5) 25 (10) 25 (10) 25 (10) 25 (10) 50 (20) 50 (20) 50 (20) 50 (20) 100 (45) 100 (45) 100 (45) 100 (45) Screw Inertia per unit ength oz-in sec 2 /in (KgM 2 /M).1 x 10-5 (.4 x 10-6 ).1 x 10-5 (.4 x 10-6 ).1 x 10-5 (.4 x 10-6 ).1 x 10-5 (.4 x 10-6 ).3 x 10-5 (1.3 x 10-6 ).3 x 10-5 (1.3 x 10-6 ).3 x 10-5 (1.3 x 10-6 ).3 x 10-5 (1.3 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 1.5 x 10-5 (6.5 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) 5.2 x 10-5 (20.0 x 10-6 ) Equivaent Diam.* 30 (7.6) 30 (7.6) 30 (7.6) 30 (7.6).39 (9.9).39 (9.9).39 (9.9).39 (9.9).60 (15.2).60 (15.2).60 (15.2).60 (15.2).81 (20.5).81 (20.5).81 (20.5).81 (20.5) SCREWRAIL GUIDE SCREW LINEAR ACTUATORS *ScrewRai stiffness may be modeed using Cassica Beam Defection Theory with equivaent stainess stee beam of diameter given. ** Other eads avaiabe as custom orders. 253

Spine Shafts and Guide Rais: Linear Rais and Bushings SS / SZ Series: Spine Shafts GR Series: Linear Guide Rais and Bushings Kerk SS / SZ Series Spine Shafts The Kerk Spine Shaft (SS/SZ) series spine shaft system has been designed for ight to moderate oad appications, where ow cost, ow friction, and ong ife are primary design considerations. Kerk Spine Shafts provide anti-rotation for one axis motion or a drive mechanism with rotation for two axes of motion. They are exceent aternatives for appications where hex shafts, square shafts and high-cost ba spines are typicay used. The assemby consists of a stainess stee spine shaft treated with Haydon Kerk Motion Soutions, Inc. proprietary ow friction Kerkote TFE coating, mated with a Kerkite composite poymer bushing. The bushing is suppied with an integra brass coar to faciitate various mounting configurations without nut distortion. Standard shaft straightness is.003-in (.08mm/30cm) per foot. Typica radia and torsiona cearance between shaft and bushing for a basic assemby (SSA) is.002-in to.003-in (.05-.08mm). An anti-backash assemby (SZA) is avaiabe for appications requiring minimum torsiona pay. As with other Kerk assembies, specia bushing configurations and end machining configurations are avaiabe upon request. Auminum or carbon stee spine shafts are aso avaiabe upon request. Identifying the Kerk Spine Shafts and Guide Rais part number codes SPLINE SHAFTS AND GUIDE RAILS SZ A T 04 1 K 08 XXX Prefix SS = Spine Shaft SZ = Anti- Backash Spine Shaft GR = Guide Rai EXAMPLES: Nut Stye A = Assemby B = Bushing ony S = Shaft ony Mounting T = Threaded (for Spine Shafts ony) G = Snap ring groove (for Guide Rais ony) P = Pain (no features) S = Shaft ony X = Custom Rai Diameter 02 = 1/8-in 04 = 1/4-in 06 = 3/8-in 08 = 1/2-in 12 = 3/4-in Number of Bushings per Rai 0 1 2 3 4 5 Use 0 for Shaft ony and 1 if Bushing ony Coating S = Uncoated K = Kerkote B = Back Ice N = Bushing ony Length in Inches (Rounded up) Exampe: 06 = 6-in 08 = 8-in 00 = Bushing ony Unique Identifier Proprietary suffix assigned to a specific customer appication. The identifier can appy to either a standard or custom part. NOTE: Dashes must be incuded in Part Number ( ) as shown above. For assistance or order entry, ca our engineering team at 603 213 6290. SZAT041K-12-XXXX = Spine shaft with anti-backash, shaft and threaded bushing assemby, 1/4-in shaft, 1 bushing per rai, Kerkote coating, 12-in ength, with no specia features added. GRBPO41N-00-XXXX = Guide rai, pain bushing ony, 1/4-in shaft, with no specia features added. 254

Spine Shafts and Guide Rais: Spine Shaft Dimensiona Drawings SS Series Spine Shafts Rai Diameter Code Shaft A in ±.002 (mm ± 0.05) Root Diameter in ±.002 (mm ± 0.05) Tube I.D. in ±.002 (mm ± 0.05) Bushing Diameter B in ±.001 (mm ± 0.025) Bushing Length C in ±.01 (mm ± 0.25) Thread M Thread Length N in ±.002 (mm ± 0.05) Equivaent Diameter** SS/SZ 02 04 06 08 12 0.125 (3.18) 0.250 (6.35) 0.375 (9.53) 0.500 0.750 (19.05) 0.095 (2.41) 0.202 (5.13) 0.306 (7.77) 0.419 (10.64) 0.630 (16.00) NA NA NA NA NA 0.375 (9.53) 0.500 0.625 (15.88) 0.813 (20.65) 1.125 (28.58) 0.500 0.75 (19.1) 1.00 (25.4) 1.50 (38.1) 2.25 (57.2) 3/8-24 7/16-20 9/16-20 3/4-20 1-16 0.250 (6.35) 0.250 (6.35) 0.375 (9.53) 0.500 0.750 (19.05) 0.110 (2.79) 0.226 (5.74) 0.341 (8.65) 0.458 (11.63) 0.690 (17.53) MaximumTwist: 3 /ft about Spine Shaft axis Torsiona Cearance (SSA): 3 Bushing to Shaft Spine Shaft stiffness may be modeed as a round rod with diameters given. 0.125-in rai size ony avaiabe in SSAP and SSAT styes. SSAP SSAT SPLINE SHAFTS AND GUIDE RAILS SZAP SZAT 255

Linear Rais and Bushings Dimensiona Drawings Kerk GR Series Linear Rais and Bushings The GR Series inear rai system has been designed for ight oad appications where ow cost, minimum frictiona drag and ong wear ife are primary design considerations. The assemby consists of a centeress ground and burnished stainess stee shaft mated with a Kerkite composite poymer bushing. The materia combinations have been seected so that therma fuctuations have minima effect on system performance. Additiona ubricity and extended ife can be obtained by using a ow friction Kerkote TFE coating on support shafts avaiabe in both stainess and aoy stee. Standard shaft straightness is.002-in (0.05mm) per foot and typica radia cearance between shaft and bushing is.0005-in (.013mm) on non-coated assembies and.001-in (.025mm) on Kerkote TFE coated assembies. Bushings are manufactured with standard retaining ring grooves. SPLINE SHAFTS AND GUIDE RAILS GR Rai Diameter Code 04 06 08 12 Standard Part Lengths in ±.010 (mm ± 0.25) 6/8 10/12 6/12 15/18 12/15 18/24 18/24 36 Rai Rai Diameter Diameter w/tfe A A in ±.0006 in ±.0006 (mm ± 0.015) (mm ± 0.015).2475 (6.287).3715 (9.436).4965 (12.611).7415 (18.834).2472 (6.279).3712 (9.428).4962 (12.603).7412 (18.826) Bushing Outside Diam. B in ±.0006 (mm ± 0.015).5000 (12.700).7500 (19.050) 1.0000 (25.400) 1.2500 (31.750) Bushing Length C in ±.010 (mm ± 0.25).765 (19.43) 1.275 (32.39) 1.660 (42.16) 2.036 (51.72) Bushing Inside Diam. D in ±.0005 (mm ± 0.013).2485 (6.311).3725 (9.462).4975 (12.637).7425 (18.860) Snap Ring Groove Location E +.010 in.000 + 0.25 mm 0.00.535 (13.59).995 (25.27) 1.330 (33.78) 1.620 (41.15) ( ) Snap Ring Groove Diam. F in ±.004 (mm ± 0.100).450 (11.43).676 (17.17).900 (22.86) 1.125 (28.60) Snap Ring Groove Width G in ±.0003 (mm ±0.008).040 (1.02).046 (1.17).046 (1.17).058 (1.47) Rai Chamfer H in.020 (.51).020 (.51).020 (.51).030 (.76) Radia Load bs (Kg) 5 (2.3) 10 (4.5) 15 (6.8) 25 (11.4) 256

Linear Rai Appication Checkist Haydon Kerk Linear Rai Systems are designed to be precision motion devices. Many variabes must be considered before appying a particuar rai system in an appication. The foowing is a basic checkist of information needed that wi make it easier for the Haydon Kerk engineering team to assist you in choosing the proper inear rai. Name Company Address City State Zip Country Phone Emai 1) o Maximum Load? (N or bs.) 2) o Load Center of Gravity (cg) Distance and Height? (mm or es) See iustrations (A) (B) (C) beow. (C) (B) (A) Dimensions (o mm / o ): o (A)... OR o (B) AND... o (C) 3) o Rai Mount Orientation? The force needed to move the oad is dependent on the orientation of the oad reative to the force of gravity. For exampe, tota required force in the horizonta pane (D) is a function of friction and the force needed for oad acceeration (F f + F a ). Tota force in the vertica pane is a function of friction, oad acceeration, and gravity (F f + F a + F g ). Orientation: o (D) o (E) o (F) o (G) o (H) 4) o Stroke Length to Move Load? (mm or es). Overa rai size wi be a function of stroke ength needed to move the oad, the rai frame size (oad capabiity), the motor size, and whether programmabe drive system is added. (K) 5) o Move Profie? A trapezoida move (J) profie divided into 3 equa segments is a common move profie and easy to work with. Another common move profie is a trianguar profie divided into 2 equa segments. o (J) Trapezoida o (K) Trianguar o (L) Compex If using a trapezoida (J) or trianguar (K) move profie, the foowing is needed a) o Point to point move distance (mm or es) b) o Move time (seconds) incuding time of acceeration and deceeration c) o Dwe time between moves (seconds) The trapezoida move profie is a good starting point in heping to size a system for prototype work. A compex move profie (L) requires more information. a) o Time (in seconds) incuding: T 1, T 2, T 3, T 4, T 5 T n and T dwe b) o Acceeration/Deceeration (in mm/sec.2 or es/sec.2) incuding: A 1, A 2, A 3 A n For detais contact Haydon Kerk Motion Soutions Engineering ca 203 756 7441. (L) 6) o Position Accuracy Required? (mm or es). Accuracy = the difference between the theoretica position and actua position capabiity of the system. Due to manufacturing toerances, actua trave wi be sighty different than theoretica commanded position. See figure (M) on right. (M) 7) o Position Repeatabiity Required? (mm or es) Repeatabiity = the range of positions attained when the rai is commanded to approach the same position mutipe times under identica conditions. See figure (M) on right. 8) o Positioning Resoution Required? (mm/step or es/step). Positioning resoution is the smaest move command that the system can generate. The resoution is a function of many factors incuding the drive eectronics, ead-screw pitch, and encoder (if required). The terms resoution and accuracy shoud never be used interchangeaby. 9) o Cosed-Loop Position Correction Required?: o YES o NO In stepper motor-based inear rai systems, position correction is typicay accompished using a rotary incrementa encoder (either optica or magnetic). 10) o Life Requirement?: (seect the most important appication parameter) a) o Tota mm or es b) o Number of Fu Strokes c) o Number of Cyces 11) o Operating Temperature Range? ( C or F) a) o Wi the system operate in an environment in which the worst case temperature is above room temperature? b) o Wi the system be mounted in an encosure with other equipment generating heat? 12) o Controer / Drive Information? a) o Haydon Kerk IDEA Drive (with Size 17 Motors ony) b) o Customer Suppied Drive... Type?... o Chopper Drive o L / R Drive Mode: 13) o Power Suppy Votage? (VDC) 14)* o Step Resoution? a) o Fu Step b) o Haf-Step c) o Micro-Step 15)* o Drive Current? (A rms / Phase) and (A peak / Phase) 16)* o Current Boost Capabiity? (%) SEE CATALOG PAGES 203 THROUGH 205 FOR EXPLANATIONS * If the Haydon Kerk IDEA Drive is used disregard items 14, 15, and 16.