FDRW40C20J(200V, 40A) Soft Recovery FRD Series Maximum Rating and Characteristics Maximum Ratings (at Ta=25 C unless otherwise specified.) Item Symbol Conditions Ratings Units Repetitive peak reverse voltage VRRM 200 V Average forward current IO 50Hz Square wave duty =/2 TC = 98 C 40* A Non-repetitive forward surge current ** IFSM Sine wave, 0ms shot 20 A Operating junction temperature Tj +50 C Storage temperature Tstg -40~+50 C * Out put current of center tap full wave connection. ** Rating per element. Electrical Characteristics (at Ta=25 C unless otherwise specified.) Item Symbol Conditions Maximum Units Forward voltage*** VF IF = 20A 2.8 V Reverse current*** IR VR = VRRM 250 μa Reverse recovery time*** trr VR=30V,IF = 2.0A -di/dt=200a/us 0.055 μs Thermal resistance Rth(j-c) Junction to case 0.5 C/W *** Rating per element. Mechanical Characteristics Item Conditions Maximum Units Mounting torque Recommended torque 0.4~0.6 N m Approximate mass 4.9 g 7984 July 202
FDRW40C20J Outline Drawings, mm TO 247 2
FDRW40C20J Characteristics (Representative) Forward Characteristic (typ.) Reverse Characteristic (typ.) 0 2 Tj=50 C Tj=25 C 0 0 Tj=00 C IF Forward Current (A) Tj=50 C Tj=25 C Tj=00 C Tj=25 C IR Reverse Current (µa) 0 0 0 - Tj=25 C 0. 0.2 0.4 0.6 0.8.0.2.4.6.8 2.0 2.2 2.4 2.6 VF Forward Voltage (V) 0-2 0 00 200 300 400 500 600 700 800 900 000 00 200 300 400 VR Reverse Voltage (V) 70 Forward Power Dissipation (max.) 0.6 360 Reverse Power Dissipation (max.) 0.4 VR WF Forward Power Dissipation (W) 60 50 40 30 20 60 =ג Square wave 20 =ג Square wave 80 =ג Sine wave 80 =ג Square wave PR Reverse Power Dissipation (W) 0.2 0.0 0.08 0.06 0.04 α α=80 0 0.02 Per element 0 0 2 4 6 8 0 2 4 6 8 20 22 IF(AV) Average Forward Current (A) Per element 0.00 0 00 200 300 400 500 600 700 800 900 000 00 200 300 VR Reverse Voltage (V) 3
FDRW40C20J Current Derating (IO-TC) (max.) Surge Capability (max.) 60 000 50 40 30 TC Case Temperature ( C) 20 0 00 90 80 80 =ג Square wave 80 =ג Sine wave 20 =ג Square wave 60 =ג Square wave IFSM Peak Half - Wave Current (A) 00 0 70 60 50 40 0 0 20 30 40 50 60 IO Average Forward Current (A) 0 00 Number of Cycles at 50Hz Conduction :ג angle of forward current for each rectifier element IO:Output current of center-tap full wave connection 0 Transient Thermal Impedance (max.) Rth j-c:0.5 /W Transient Thermal Impedance ( C/W) 0 0 0-0 -2 0-3 0-2 0-0 0 0 0 2 t Time (sec) 4
FDRW40C20J WARNING. This Catalog contains the product specifications, characteristics, data, materials, and structures as of July 202. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sur to obtain the latest specifications. 2. All applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Co., Ltd. is (or shall be deemed) granted. Fuji Electric Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. Although Fuji Electric Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design failsafe, flame retardant, and free of malfunction. 4. The products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. Computers OA equipment Communications equipment (terminal devices) Measurement equipment Machine tools Audiovisual equipment Electrical home appliances Personal equipment Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. Transportation equipment (mounted on cars and ships) Trunk communications equipment Traffic-signal control equipment Gas leakage detectors with an auto-shut-off feature Emergency equipment for responding to disasters and anti-burglary devices Safety devices Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). Space equipment Aeronautic equipment Nuclear control equipment Submarine repeater equipment 7. Copyright 996-202 by Fuji Electric Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 5