Live Line tools and Arc-Flash protection

Live Line tools and Arc-Flash protection 2018 PRODUCT CATALOGUE We provide everything in tools and safety equipment, from LLE tools to Arc Flash protection. SAB ELTEKNIK AB, MJÖBÄCKSVÄGEN 2, 512 60 ÖVERLIDA, PHONE SAB ELTEKNIK +46 651-760 AB PHONE 790, +46 FAX 651-760 +46 651-156 790 INFO@SABP.SE 79, INFO@SABP.SE, WWW.SABP.SE WWW.SABP.SE1

Contents Personal safety equipment Insulating glove CLY 4 Insulating gloves 4 Glove tester 5 Protective goatskin glove CLY 5 Storing ISO gloves 5 Arc-Flash Hood 5 Hard hat w/ face shield 12 cal/cm 2 6 CATU helmet 6 Safety goggles LLE transparent 7 Safety goggles LLE Tinted 7 Safety goggles Tinted 7 Rescue equipment 8 Portable rescue kit 8 Protection blankets and matting Insulating rubber mats 9 Transparent protection blanket 9 Blanket clamp 9 Cable end caps 9 Insulating shunts with penetrating clamps Penetrating clamps 10 Connectors w/ cord 10 Assembly tool 10 Terminal 10 Hexagon socket connector 10 M6M Connector 10 Cutters and Pliers Universal RCS cutter 11 Cutter w/ round blade 11 U.S. cutter Side cutter 11 Cable cutter 11 Electronics cutter 12 Combination pliers 12 Combination pliers w/ insulated head 12 Bending pliers 12 Flat pliers 12 Composite flat pliers 12 Composite snipe nose pliers with bent tip and cutter 13 Wire stripper 13 Slip joint pliers 13 Knives and blades Cable knife with sheath 14 Cable knife 14 Cable knife w/ insulated blade 14 Cable knife w/ insulated blade 14 Bow saw 14 Ratchet wrenches and sleeves T-handle 15 Locking lever 15 Adjustable torque wrench 15 Extension 15 Hexagon sleeves 3/8 16 Hexagon sleeves 1/2 16 Hexagon socket sleeves 3/8" 17 Hexagon socket sleeves 1/2" 17 Spanners Engineer's wrench 17 Ring spanner 18 Adjustable spanner 18 Ratcheting ring wrench 18 Screwdrivers Slotted screwdriver 19 PH-Phillips screwdriver Futur II 19 PZ-Pozidrive screwdriver Futur II 19 Screwdriver set 6 PCS1000V 19 Cartridge screwdriver w/ magnetic holder 1/4 20 Hexagonal screwdriver Futur II 20 Sleeve screwdriver Futur II 20 TORX screwdriver Futur II 21 Hex screwdriver offset 21 Hex Socket T-handle 21 T-handles Hex T-handle 22 Hex T-handle 22 Socket wrench T-handle 22 Gauge ring tools Gauge ring mounting tool 23 Miscellaneous Mirror 23 Counterstay tool for screw-on connector pipe 23 Dummy fuses 23 LLE kits LLE kit STF 24 LLE kit SVEL 25 LLE kit VSS 26 Aluminium tool case 26 Leather tool bag LLE 26 Ladders Fibreglass telescope ladder 27 Fibreglass ladder double 27 Fully insulated fibreglass ladder 27 2 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Essential tools for improving personal safety The demand for uninterrupted power supply is growing and it entails additional challenges for electricians They will frequently be performing installations or maintenance under live conditions LLE is an abbreviation of Live Line Equipment. In-depth knowledge about methods and safety requirements are important aspects of LLE and of equal importance is the choice of tools. This is something that SAB Elteknik has taken to heart. Thanks to our partnerships with training providers and the authorities, we are able to quickly produce new tools and equipment that simplify the tasks and make the workplace safer. Using tools and equipment tailored to LLE will help improve your personal safety. This also applies when performing work on high voltage equipment, i.e. 380V, since the equipment is forgiving and allow for small mistakes without causing electrical damage. You work insulated by three barriers and the clothing is arc flash protected, providing extra protections for the hands and face. SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 3

Personal safety equipment Insulating glove CLY We are one of a handful of suppliers that offer reinforced insulating gloves of this type. This manufacturing process produces an insulating glove with excellent properties: Better voltage resistance Better arc flash protection (25 cal/cm 2 vs. 5-8 cal/cm 2 for latex gloves) Better comfort Thanks to this, the CLY glove is thinner, more flexible and much more comfortable to work with than latex gloves. We know that the energy from an arc flash increases with proximity. That means that the gloves are subjected to an order of magnitude higher exposure compared to clothes and face shields. The CLY glove in combination with the goatskin glove on the next page provides at least 53 cal/cm 2 against Arc Flash. Accessories: Insulated arm protection in order to extend the ISO glove. SAB no E no Designation Size Length 64112400 E1691268 Insulating glove Black CLY550 11 class 0 1,000 V 8 280 mm 64112410 E1691269 Insulating glove Black CLY550 11 class 0 1,000 V 9 280 mm 64112420 E1691270 Insulating glove Black CLY550 11 class 0 1,000 V 10 280 mm 64112430 E1691271 Insulating glove Black CLY550 11 class 0 1,000 V 11 280 mm 64112650 Insulating glove Black CLY 56114 14 class 1 7,500 V 8 355 mm 64112652 Insulating glove Black CLY 56114 14 class 1 7,500 V 9 355 mm 64112654 Insulating glove Black CLY 56114 14 class 1 7,500 V 10 355 mm 64112656 Insulating glove Black CLY 56114 14 class 1 7,500 V 11 355 mm 64112452 Insulating glove Black CLY552 16 class 2 17,000 V 9 405 mm 64112454 Insulating glove Black CLY552 16 class 2 17,000 V 10 405 mm 64112456 Insulating glove Black CLY552 16 class 2 17,000 V 11 405 mm 64112462 Insulating glove Black CLY553 16 class 3 26,500 V 9 405 mm 64112464 Insulating glove Black CLY553 16 class 3 26,500 V 10 405 mm 64112466 Insulating glove Black CLY553 16 class 3 26,500 V 11 405 mm 64112470 Insulating glove Black CLY553 18 class 3 26,500 V 9 455 mm 64112472 Insulating glove Black CLY553 18 class 3 26,500 V 10 455 mm 64112474 Insulating glove Black CLY553 18 class 3 26,500 V 11 455 mm Insulating gloves Complies with IEC-903 class M requirements, which means that the gloves have undergone extra tests relating to durability, wear and mechanical stress. Manufactured from latex rubber, 100% tested. SAB no E no Class Voltage Thickness mm Weight, kg 64111850 E1690093 0 size 8 1000 V 1.0 0.20 kg 64111900 E1690092 0 size 9 1000 V 1.0 0.20 kg 64112000 E1690094 0 size 10 1000 V 1.0 0.20 kg 64112050 E1690095 0 size 11 1000 V 1.0 0.20 kg 64112100 E1690090 Inner glove cotton, size L 64112110 E1690091 Inner glove cotton, size S 4 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Personal safety equipment Glove tester Pneumatic tester for checking insulating gloves before use. The glove is inflated and submerged in water. SAB no E no Measurements Weight, kg 64112800 E1690096 140x150x160 mm 0.60 kg Protective goatskin glove CLY Protective gloves should be used on top of insulating gloves in order to achieve the necessary mechanical protection against cuts, bruises and punctures. Our goatskin gloves are softer and therefore more flexible and comfortable to work with. The size of the glove id tailored to the outside measurements of the insulating glove. SAB no E no Designation Size Length 64112400 E1680654 Protective glove size 08 CLY 555 8 250 mm ILPG10 64112505 E1680655 Protective glove size 09 CLY 555 9 250 mm ILPG10 64112510 E1680656 Protective glove size 10 CLY 555 10 250 mm ILPG10 64112515 E1680657 Protective glove size 11 CLY 555 ILPG10 11 250 mm Storing ISO gloves CG35 is a wall-mounted storage container. Talcum powder included. CG36 is a waterproof portable container with belt clip. SAB no E no Measurements Weight, kg 64112210 E1690097 CG35 60x210x460 mm 0.73 kg 64112200 E1690098 CG36 60x180x400 mm 0.12 kg SAB no E no Description Weight, kg 70662015 White, yellow or red 345 g Arc-Flash Hood Complete Arc Flash protection for face and head, which also protects the air passage against hot and hazardous gases as well as molten metal. The non-mist face shield provides a good view in in all directions. As the hood is not integrated in the hard hat it is CE-marked and classed in accordance with GS-ET-29 class 2. The hood is made from INDURA and has an arc rating of 14 cal/cm2 (ATPV as per ASTM F2178). SAB no E no Description Weight, kg 64CLY5455511RB E1680119 Arc-tested hood 0.2 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 5

Personal safety equipment Hard hat w/ face shield 12 cal/cm 2 AS1200HT is our latest product and tolerates ATPV class 12 cal/ cm 2, hard hat and face shield jointly tested. The face shield has a unique feature enabling it to be opened in a position on top of the hard hat. The chin protection is heat resistant and stops particles from penetrating. The shield is manufactured with nano-technology to provide a better view without losing Arc Flash protection and can easily be replaced. The shield has ventilation funnels that prevents mist and provides cleaner air to breathe, without losing resistance to hot gases. The hinge of the shield has fittings for mounting lights. SAB no Model Description Weight, kg 64CLY540AS1200HT Hard hat AS1200HT ATPV tested to 12 cal/cm 2 ** 0.50 kg 64CLY581121 Hood CLY581 EN61482 1, EN531AB1C1, ASTM1959 12,1 cal/cm 2 0.12 kg **Test for EN classification ongoing CATU helmet Hard hat with ARC FLASH-integrated face shield and neck protection. The neck protection prevents the arc from reaching inside the face shield. The face shield is approved in accordance with the following standards. IEC 61482-1-2 class 2 (7kA-500ms 300mm-Energy 10.185 cal/cm²)gs-et 29. IEC 61 482-1-1-20 cal/cm² ATPV value. The face shield is approved in accordance with the following standards. IEC 397 440V EN 50365 1,000V AC, 1,500V DC. SAB no Model Description Weight 70MO180ARC12 Arc flash hard hat with face shield and neck protection 20 cal/cm² 790 grammes 6 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Personal safety equipment Safety goggles LLE transparent UV protection. In compliance with EN 166. Case included. SAB no E no Weight, kg 64666010 0.03 kg Safety goggles LLE tinted UV protection. In compliance with EN 170. Case included. SAB no E no Weight, kg 64666020 0.03 kg Safety goggles Tinted For use on top of regular glasses. UV protection. In compliance with EN 170. Case included. SAB no E no Weight, kg 64666040 0.04 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 7

Rescue Rescue equipment Complete kit for emergencies in high voltage environments. All accessories are delivered attached to a wall-mounted plate. Rescue hook with rod and voltage tester for disconnecting an injured person Cutter with insulated handles insulated stool Insulating gloves Insulating shoes SAB no E no Measurements Weight, kg 60CZ54R 840 x 750 mm 21.0 kg Portable rescue kit Complete kit for emergencies in high voltage environments. Compact and designed for transportation and vehicles. Suitable for emergency vehicles. Insulated stool (the box lid) Telescopic insulated rod Voltage tester Rescue hook Insulated cutter Insulating gloves Insulating boots Talcum powder SAB no E no Measurements Weight, kg 60CZ53R 71 x 57 x 24 cm 18.50 kg 8 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Protection blankets and matting Insulating rubber mats Manufactured from high-quality insulating rubber. SAB no E no Voltage Thickness Measurements Weight, kg 64MP4211 E1690099 1 kv 3 mm 1.0 x 10.0 m 3.0 kg 64MP100035 E1690101 1 kv 3 mm 1.0 x 5.0 m 29.0 kg 64MP1000310 E1690102 1 kv 3 mm 1.0 x 10.0 m 32.0 kg Transparent protection blanket For shock protection in cabinets, devices and overhead lines. Attached with clamps. SAB no E no Thickness Measurements Weight, kg 64MP3512 E1690103 0.3 mm 1.3 x 12.5 m 6.00 kg 64641910 0.5 mm 1.3 x 10 m 15.0 kg 64641925 0.5 mm 1.3 x 25 m 37.5 kg 64641950 0.5 mm 1.3 x 50 m 75.0 kg 64641951 E1690104 Marked 0.5 mm 1.3 x 1.0 m 1.50 kg Blanket clamp Insulated clamp. SAB no E no Measurements 64112900 E1690106 Plastic, opening Ø= 45 mm 64112920 Plastic, opening Ø= 65 mm Cable end caps Self-locking insulated end caps. SAB no E no Measurements Design Weight, kg 64646004 E6879000 10 x 40 mm red Straight, sleeve 0.01 kg 64646004B E6879001 10 x 40 mm blue Straight, sleeve 0.01 kg 64646004V E6879002 10 x 40 mm grey Straight, sleeve 0.01 kg 64646006 10 x 60 mm red Straight, sleeve 0.01 kg 64646015 15 x 100 mm red Straight, sleeve 0.01 kg 64646020 20 x 110 mm red Straight, sleeve 0.01 kg 64646030 30 x 130 mm red Straight, sleeve 0.02 kg 64646040 40 x 150 mm red Straight, sleeve 0.02 kg 64646060 60 x 185 mm red Straight, sleeve 0.02 kg 64645001 20 x 100 mm red Conical 0.01 kg 64645005 4 x 50 mm red Conical 0.01 kg 64645005B 4 x 50 mm blue Conical 0.01 kg 64645005V 4 x 50 mm blue Conical 0.01 kg 64647010 10 x 60 mm red Conical 0.01 kg 64647030 10 x 30 mm red Conical 0.01 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 9

Penetrating clamps, insulated shunts Penetrating clamps Four penetrating clamps for cable 10-95 mm 2. There are clamps for covering cable 95-240 mm 2. The clamps have 8 mm terminals for shunt connectors as well as D4mm terminals for gauges Each clamp can be phase marked by twisting a knob. In compliance with EN 60900 and EN 61010 and withstands short circuits 5 ka/0.2 sec. SAB no E no Measurements 64073470 For 10 95 mm 2 64073480 For 95 240 mm 2 Connectors w/ cord The shunt cords are 3 metres in length and are tested U/U0 1.8/3 kv, at 200 A for 60 minutes, at 250 A for 15 minutes The cord is doubly insulated and withstands 8 ka for 0.2 seconds and 1.3 ka for 60 seconds. The shunt cords are in compliance with EN/IEC 60900:2004 (in Anlehnung) - DIN EN61010-031 (in Anlehnung) - IEC 228 - Klasse 5. The doubly insulated clamp withstands the same loads as the cord and complies with EN/IEC 60900:2004 and DIN EN 61010-034. SAB no E no Measurements 64073461 Plastic, opening Ø= 45 mm Assembly tools Tool for making a shunt connector with the equipment below, with a voltage of up to 1,000 volts. SAB no E no Measurements Weight, kg 64073196 180x55 mm 0.164 kg Terminal Terminal for shunt and measuring, to be used with the above assembly tool. SAB no E no Measurements Weight, kg 64073321 45x39 mm 0.06 kg Hexagon socket connector Connector for hexagon socket screws, ensuring electrical contact when shunting and measuring. SAB no E no Measurements Size Weight, kg 64073260 56x20 mm SW6 0.034 kg 64073250 56x20 mm SW5 0.030 kg M6M connector Connector for bolts and screws ensuring electrical contact when shunting and measuring. SAB no E no Measurements Weight, kg 64073236 21x19 mm 0.018 kg 10 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Cutters and Pliers Universal RCS cutter Universal high-performance cutter for Cu and Al cable. Handles diameters of up to 85 mm. Insulated handles, SAB no E no Length, mm Capacity Weight, kg 64251522 420 Ø 62 mm 2.20 kg 64251525 550 Ø 85 mm 3.15 kg Cutter w/ round blade For Cu and Al. The round blade means a higher capacity and the cable retains it round shape after cutting. SAB no E no Length, mm Capacity Weight, kg 64254316 170 Ø 16 mm 0.22 kg 64254321 210 Ø 18 mm 0.40 kg U.S. cutter Robust cutter for extreme conditions. For Cu and Al. SAB no E no Length, mm Capacity Weight, kg 64254324 240 Ø 20 mm 0.57 kg Side cutter SAB no E no Length, mm Type Weight, kg 64236316 160 0.23 kg 64236318 180 0.26 kg 64236516 160 Insulated head 0.24 kg 64236518 180 Insulated head 0.28 kg Cable cutter SAB no E no Length, mm Weight, kg 64237320 200 0.34 kg 64236326 260 0.46 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 11

Pliers Electronics cutter SAB no E no Length, mm Capacity Weight, kg 64236211 110 0.07 kg Combination pliers SAB no E no Length, mm Capacity Weight, kg 64216316 160 Ø 10 mm 0.27 kg 64216318 180 Ø 12 mm 0.29 kg 64216320 200 Ø 13 mm 0.36 kg Combination pliers w/ insulated head SAB no E no Length, mm Capacity Weight, kg 64216418 E1616856 180 Ø 12 mm 0.29 kg 64216420 E1616857 200 Ø 13 mm 0.39 kg Bending pliers SAB no E no Length, mm Type Weight, kg 64218316 160 Normal jaws 0.19 kg 64218816 160 Long jaws 0.17 kg Flat pliers SAB no E no Length, mm Type Weight, kg 64217316 160 Normal jaws 0.20 kg 64217416 E1616860 160 Insulated head normal 0.22 kg jaws 64217816 160 Long jaws 0.16 kg Composite flat pliers SAB no E no Length, mm Type Weight, kg 64217319 180 Normal jaws 0.10 kg 12 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Pliers Composite snipe nose pliers with bent tip and cutter SAB no E no Length, mm Type Weight, kg 64219999 210 Angled tip 0.11 kg Wire stripper SAB no E no Length, mm Type Weight, kg 64271316 165 5-10 mm diameter 0.18 kg Slip joint pliers SAB no E no Length, mm Type Weight, kg 64292618 180 0.23 kg 64292625 250 0.37 kg 64292626 260 Variable adjustment 0.59 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 13

Knives and blades Cable knife with sheath SAB no E no Length, mm Blade length Weight, kg 64288700 175 47 mm 0.06 kg Cable knife SAB no E no Length, mm Blade length Weight, kg 64281300 180 50 mm 0.08 kg Cable knife w/ insulated blade SAB no E no Length, mm Blade length Weight, kg 64281310 180 50 mm 0.08 kg Cable knife w/ insulated blade SAB no E no Length, mm Blade length Weight, kg 64281500 200 50 mm 0.07 kg Bow saw SAB no E no Length, mm Designation Weight, kg 64424300 E1623506 470 0.66 kg 64421000 E1623507 300 Spare blades 0.17 kg 24/32 14 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Ratchet wrenches and sleeves T-handle Patented locking of the sleeve. SAB no E no LxB / LxW Blade length Weight, kg 64125402 E1622730 165x200 mm 3/8 0.35 kg 64125302 E1622731 165x200 mm 1/2 0.38 kg 64125802 E1622732 160x195 mm 3/8 0.25 kg 64125702 E1622733 160x195 mm 1/2 0.42 kg Locking lever SAB no E no LxH Blade length Weight, kg 64131338 E1622735 200x70 mm 3/8 0.31 kg 64131312 E1622736 260x80 mm 1/2 0.66 kg Adjustable torque wrench The desired torque is set with the knob on the handle marked with the torque range. The achieved torque is indicated by clicking noises in the handle. SAB no E no LxH Size Torque Weight, kg 64131912 E1622744 350x75 mm 1/2 10-50 Nm 0.95 kg 64131938 E1622745 280x75 mm 3/8 10-50 Nm 0.90 kg 64131931 E1622746 465x75mm 1/2 30-130 Nm 1.30 kg Extension Automatically locks the sleeve when the extension is attached to the handle. SAB no E no Length, mm Size Weight, kg 64132412 125 3/8 0.14 kg 64132425 250 3/8 0.30 kg 64133412 125 1/2 0.20 kg 64133425 250 1/2 0.40 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 15

Ratchet wrenches and sleeves Hexagon sleeves 3/8 The standard sleeve is 40 mm deep and is available in both hex and double hex. The long is 70 mm deep. Standard Size Hex Dbl. Hex Weight, grams SW6 64130206 64135206 22 SW7 64130207 64135207 23 SW8 64130208 64135208 25 SW9 64130209 64135209 28 SW10 64130210 64135210 57 SW11 64130211 64135211 28 SW12 64130212 64135212 30 SW13 64130213 64135213 33 SW14 64130214 64135214 34 SW15 64130215 64135215 38 SW16 64130216 64135216 43 SW17 64130217 64135217 48 SW18 64130218 64135218 53 SW19 64130219 64135219 56 SW20 64130220 64135220 70 SW21 64130221 64135221 83 SW22 64130222 64135222 95 SW23 SW24 64130224 64135224 112 SW27 SW30 Long Hex 64130308 50 64130309 55 64130310 63 64130311 67 64130312 70 64130313 77 64130314 75 64130315 100 64130316 113 64130317 122 64130318 130 64130319 144 64130320 150 64130321 160 64130322 185 64130323 210 64130324 250 64130327 315 64130330 360 Weight, grams Hexagon sleeves 1/2 The standard sleeve is 40 mm deep and is available in both hex and double hex. Standard Size Hex Dbl. Hex Weight, grams SW8 64130408 64135408 53 SW9 64130409 64135409 53 SW10 64130410 64135410 55 SW11 64130411 64135411 55 SW12 64130412 64135412 57 SW13 64130413 64135413 60 SW14 64130414 64135414 65 SW15 64130415 64135415 70 SW16 64130416 64135416 74 SW17 64130417 64135417 78 SW18 64130418 64135418 82 SW19 64130419 64135419 85 SW20 64130420 64135420 116 SW21 64130421 64135421 127 SW22 64130422 64135422 130 SW23 64130423 64135423 140 SW24 64130424 64135424 148 SW27 64130427 64135427 210 SW30 64130430 64135430 252 SW32 64130432 64135432 270 SW34 64130434 64135434 300 16 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Sleeves and Spanners Hexagon socket sleeve 3/8" SAB no E no Size Length, mm Weight, kg 64140303 SW 3 85 0.05 kg 64140304 SW 4 85 0.06 kg 64140305 SW 5 85 0.06 kg 64140306 SW 6 85 0.07 kg 64140307 SW 7 85 0.07 kg 64140308 SW 8 85 0.07 kg 64140309 SW 9 85 0.08 kg 64140310 SW 10 85 0.10 kg 64140311 SW 11 85 0.11 kg 64140312 SW 12 85 0.12 kg 64140313 SW 13 85 0.13 kg 64140314 SW 14 85 0.14 kg Hexagon socket sleeve 1/2" Engineer's wrench SAB no E no Size Length, mm Weight, kg 64140504 SW 4 85 0.06 kg 64140505 SW 5 85 0.06 kg 64140506 SW 6 85 0.07 kg 64140507 SW 7 85 0.07 kg 64140508 SW 8 85 0.07 kg 64140510 SW 10 85 0.10 kg 64140512 SW 12 85 0.12 kg 64140514 SW 14 85 0.14 kg 64140605 SW 5 125 0.10 kg 64140606 SW 6 125 0.10 kg 64140608 SW 8 125 0.12 kg 64140610 SW 10 125 0.15 kg SAB no E no Size Length, mm Weight, kg 64151306 6 80 0.02 kg 64151307 7 80 0.02 kg 64151308 8 95 0.02 kg 64151309 9 105 0.02 kg 64151310 10 110 0.03 kg 64151311 11 115 0.03 kg 64151312 12 130 0.04 kg 64151313 13 135 0.05 kg 64151314 14 140 0.05 kg 64151315 15 145 0.06 kg 64151316 16 155 0.08 kg 64151317 17 155 0.08 kg 64151318 18 170 0.10 kg 64151319 19 175 0.10 kg 64151321 21 200 0.16 kg 64151322 22 220 0.19 kg 64151324 24 240 0.24 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 17

Spanners Ring spanner SAB no E no Size Length, mm Weight, kg 64161306 6 140 0.04 kg 64161307 7 145 0.05 kg 64161308 8 150 0.06 kg 64161309 9 155 0.06 kg 64161310 10 165 0.09 kg 64161311 11 175 0.10 kg 64161312 12 185 0.10 kg 64161313 13 185 0.10 kg 64161314 14 195 0.10 kg 64161315 15 200 0.16 kg 64161316 16 205 0.18 kg 64161317 17 205 0.20 kg 64161318 18 215 0.20 kg 64161319 19 220 0.30 kg 64161320 20 240 0.30 kg 64161321 21 245 0.30 kg Bahco adjustable spanner SAB no E no Opening Length, mm Weight, kg 64151904 E1622100 0-13 mm 110 0.14 kg 64151906 E1622101 0-20 mm 160 0.19 kg 64151908 E1622102 0-27 mm 210 0.26 kg 64151910 E1622103 0-30 mm 260 0.40 kg 64151912 E1622104 0-34 mm 310 0.90 kg 64151915 E1622105 0-44 mm 360 1.23 kg 64151918 E1622106 0-53 mm 450 1.90 kg Ratcheting ring wrench Double-sided wrench that lets the bolt through. SAB no E no Opening Length, mm Weight, kg 64161717 E1622705 13 x 17 mm 220 x 15. 0.28 kg 64161718 16 x 18 mm. 220 x 15. 0.40 kg 64161719 E1622706 17 x 19 mm. 240 x 15. 0.40 kg 64161724 19 x 24 mm. 240 x 15. 0.50 kg 18 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Screwdrivers Slotted screwdriver Hardened blade in accordance with DIN5264. Insulated shaft. Chrome vanadium. SAB no E no Size Length, mm Weight, kg 642111331 3 100 0.03 kg 642111340 4 100 0.04 kg 642111355 5.5 125 0.06 kg 642111365 6.5 150 0.08 kg 642111380 8 175 0.12 kg 642111310 10 200 0.19 kg PH-Phillips screwdriver Futur II Hardened blade in accordance with DIN5264. Insulated shaft. Chrome vanadium. SAB no E no Size Length, mm Weight, kg 642113300 0 60/135 0.03 kg 642113301 1 80/170 0.04 kg 642113302 2 100/200 0.07 kg 642113303 3 150/250 0.14 kg 642113304 4 200/317 0.25 kg PZ-Pozidrive screwdriver Futur II Hardened blade in accordance with DIN5264. Insulated shaft. Chrome vanadium. SAB no E no Size Length, mm Weight, kg 642114300 0 60/135 0.03 kg 642114301 1 80/170 0.04 kg 642114302 2 100/200 0.07 kg 642114303 3 150/250 0.14 kg Screwdriver set 6 pcs 1,000V Slimline, versatile screwdrivers that work well in the blocks. SAB no 6421SATS E no Slimline screwdriver set 1,000 V SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 19

Screwdrivers Cartridge screwdriver w/ magnetic holder 1/4 Cartridge in the handle holding 6 bits. Slotted 4.5 + 6.5 + 8.0. PH1 + PH2 + PH3 SAB no E no Length, mm Weight, kg 64119300 120/230 0.20 kg Hexagonal screwdriver Futur II Chrome vanadium Hardened steel Rounded hexagon easy to fit Insulated shaft SAB no E no Size Length, mm Weight, kg 64115302 2.0 60/135 0.03 kg 64115325 2.5 60/135 0.03 kg 64115303 3.0 75/155 0.04 kg 64115304 4.0 75/155 0.05 kg 64115305 5.0 75/165 0.08 kg 64115306 6.0 100/200 0.10 kg 64115308 8.0 100/210 0.15 kg Sleeve screwdriver Futur II Chrome vanadium Hardened steel Rounded hexagon easy to fit Insulated shaft SAB no E no Size Length, mm Weight, kg 642136304 4.0 125/215 0.05 kg 642136305 5.0 125/215 0.05 kg 642136355 5.5 125/215 0.05 kg 642136306 6.0 125/215 0.07 kg 642136307 7.0 125/225 0.09 kg 642136308 8.0 125/225 0.09 kg 642136309 9.0 125/225 0.10 kg 642136310 10.0 125/225 0.12 kg 642136311 11.0 125/235 0.15 kg 642136312 12.0 125/235 0.16 kg 642136313 13.0 125/235 0.17 kg 20 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Screwdrivers, T-handles Torx screwdriver Futur II SAB no E no Size Measurement Screw Length, Weight, A, mm mm kg 642110510 T10 2.74 M3-M3.5 60/135 0.03 kg 642110515 T15 3.27 M4-M5 80/170 0.05 kg 642110520 T20 3.86 M4-M5 80/170 0.05 kg 642110525 T25 4.43 M4.5-M5 80/170 0.05 kg 642110530 T30 5.52 M6 100/200 0.09 kg Hex screwdriver offset SAB no E no Height, mm Size Length, mm Weight, kg 64116304 35 4.0 104 0.03 kg 64116305 35 5.0 106 0.04 kg 64116306 40 6.0 110 0.04 kg 64116308 45 8.0 120 0.07 kg Hexagonal socket T-handle SAB no E no Nm Measurements Size Weight, kg 64117504 7 160x95 mm 4.0 0.10 kg 64117505 30 160x95 mm 5.0 0.10 kg 64117506 35 160x95 mm 6.0 0.11 kg 64117508 60 160x95 mm 8.0 0.12 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 21

Screwdrivers, gauge ring mounting tools Hexagonal socket T-handle SAB no E no Nm Measurements Size Weight, kg 64117000 30 200x90 mm 5.0 0.11 kg 64117335 30 240x90 mm 5.0 0.11 kg 64117336 30 240x90 mm 6.0 0.11 kg 64117338 30 240x90 mm 8.0 0.11 kg Socket wrench T-handle SAB no E no Measurements Size Weight, kg 64137410 200x160 mm 10 0.31 kg 64137411 200x160 mm 11 0.33 kg 64137412 200x160 mm 12 0.35 kg 64137413 200x160 mm 13 0.36 kg Long model 64138410 300x160 mm 10 0.37 kg 64138411 300x160 mm 11 0.38 kg 64138412 300x160 mm 12 0.40 kg 64138413 300x160 mm 13 0.42 kg 22 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Gauge ring mounting tools, miscellaneous Gauge ring mounting tool SAB no E no Description 64255301 6-65 A black with knife for the base plate 0.10 kg 64255401 2-63 A red 0.06 kg Mirror Fully insulated with flexible shaft. SAB no E no Length, mm Weight, kg 64555000 510 0.32 kg Counterstay tool Screw-on connector pipe Tool for using with screw-on connector sleeves. SAB no E no Diameter, mm Size Length, mm Weight, kg 64161914 14-40 195 0.30 kg Dummy fuses Industrial Red dummy fuse with warning text and special key grip with the possibility of sealing, to be used for blocking during work. Antilux Black dummy fuse for "permanent" blocking of the installation, special key grip, possibility of sealing. SAB no E no Description Weight, kg 64659520 Industrial for thread II E27 0.05 kg 64659530 Industrial for thread III E33 0.05 kg 64659550 Key for industrial dummy fuse 0.05 kg 64659560 Antilux for thread II E27 0.05 kg 64659570 Antilux for thread III E33 0.05 kg 64659580 Key for Antilux dummy fuse 0.05 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 23

LLE kits LLE kit STF Complete leather briefcase with room for all tools. Gloves, blankets and mats are stored in separate compartments. The tools are well protected. The kit is designed for terminal and switchgear cabinets. SAB no E no Weight, kg 64SATS01 E1690137 Complete kit 7.00 kg SAB no Qty Content 64281300 1 Cable knife 180 mm 642111331 1 Slotted screwdriver Futur II 3x100 mm 642111340 1 Slotted screwdriver Futur II 4x100 mm 642111355 1 Slotted screwdriver Futur II 5.5x125 mm 642113301 1 PH screwdriver Futur II No: 1x80 mm 642113302 1 PH screwdriver Futur II No: 2x100 mm 642114301 1 PZ screwdriver Futur II No: 1x75 mm 642114302 1 PZ screwdriver Futur II No: 2x100 mm 64236316 1 Side cutter 160 mm 64217416 1 Flat pliers long 64131312 1 Locking lever ½ 64130412 1 Sleeve 12 mm 64130413 1 Sleeve 13 mm 64130413 1 Sleeve 13 mm 64130414 1 Sleeve 14 mm STD.HEX. 64161311 1 Ring spanner 11x115 mm 64116305 1 Offset hexagonal socket screwdriver 5 mm 64116306 1 Offset hexagonal socket screwdriver 6 mm 64111650 1 Slotted screwdriver with holder 5x150 64112900 8 Plastic clamp 45 mm 64641951 1 Insulating blanket 1x1 m 64MP4216 1 Insulating mat 1x1 m 64112000 1 Insulating glove size 10 64112100 2 Cotton inner glove L 64737111 1 Tool briefcase 24 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

LLE kits LLE kit SVEL Complete leather briefcase with room for all tools. Gloves, blankets and mats are stored in separate compartments. The tools are well protected. The kit is designed by SVEL for terminal cabinet work. SAB no E no Weight, kg 64SATS02 E1690138 Complete kit 7.00 kg SAB no Qty Content 64281300 1 Cable knife 180 mm 642111331 1 Slotted screwdriver Futur II 3x100 mm 642111340 1 Slotted screwdriver Futur II 4x100 mm 642111355 1 Slotted screwdriver Futur II 5.5x125 mm 642113303 1 PH screwdriver Futur II No: 3x150 mm 642113304 1 PH screwdriver Futur II No: 4x200mm 642114301 1 PZ screwdriver Futur II No: 1x75 mm 642114302 1 PZ screwdriver Futur II No: 2x100 mm 64111650 1 Slotted screwdriver with holder 5x150 64236316 1 Side cutter 160 mm 64217416 1 Flat pliers with long nose 64271416 1 Wire stripper 165 mm insulated head 642136308 1 Sleeve screwdriver Futur II 8x125 mm 642136311 1 Sleeve screwdriver Futur II 11x125 mm 64131312 1 Locking lever ½ 64130412 1 Sleeve 12 mm 64130413 1 Sleeve 13 mm 64130414 1 Sleeve 14 mm 64161311 1 Ring spanner 11x115 mm 64116305 1 Offset hexagonal socket screwdriver 5 64116306 1 Offset hexagonal socket screwdriver 6 64117335 1 T-handle hexagonal socket 5 mm 64117336 1 T-handle hexagonal socket 6 mm 64117338 1 T-handle hexagonal socket 8 mm 64112900 8 Plastic clamp 45 mm 64112920 3 Plastic clamp 65 mm 64255401 1 Gauge ring mounting tool 64645005 8 Cable end cap 5 mm 64646004 12 Cable end cap 10 mm 64646020 8 Cable end cap 20 mm 64737111 1 Tool briefcase SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 25

LLE kits, cases LLE kit VSS Simple basic kit in an aluminium briefcase with room for all tools. Gloves, blankets and mats are stored in separate compartments. The tools are well protected. The kit is designed by Vattenfall Service. SAB no E no Weight, kg 64SATS10 E1690139 Complete kit 4.00 kg SAB no Qty Content 642111331 1 Slotted screwdriver Futur II 3x100 mm 642111340 1 Slotted screwdriver Futur II 4x100 mm 642111355 1 Slotted screwdriver Futur II 5.5x125 mm 642111365 1 Slotted screwdriver Futur II 6.5x125 mm 642114301 1 PZ screwdriver Futur II No: 1x75 mm 642114302 1 PZ screwdriver Futur II No: 2x100 mm 64119300 1 Cartridge screwdriver with magnet 64112120 1 Inner glove size L 64112000 1 Insulating glove size 10 64112900 6 Plastic clamp 45 mm 64MP4216 1 Insulating mat 1x1 m 64236316 1 Side cutter 160 mm 64217316 1 Flat pliers 642136310 1 Sleeve screwdriver Futur II 10x125 mm 64737190 1 Tool briefcase Aluminium tool case Compartments in the bottom and tool holders in the lid. SAB no E no Measurements LxWxH, mm Weight, kg 64737190 460x330x160 1.70 kg Leather tool bag LLE Tool bag in high-quality leather with compartments for e.g. tools, insulating mat and gloves. SAB no E no Measurements LxWxH, mm Weight, kg 64737111 440 x 195 x 160 4.00 kg 26 SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE

Ladders Fibreglass telescope ladder Safety ladder with convenient elevation system with rope and pulley. Effective protection when working in electrical installations thanks to the sides being insulated with plastic reinforced with fibreglass. SAB no E no Length Weight, kg 64541161 7.2 m 30.4 kg 64541162 8.3 m 35.2 kg 64541142 9.2 m 38.4 kg 64541143 10.2 m 42.6 kg Fibreglass ladder double Safety ladder for special tasks. Effective protection when working in electrical installations thanks to the sides being insulated with plastic reinforced with fibreglass. SAB no E no Length Weight, kg 64541163 4.9 m 21.4 kg 64541164 6.0 m 25.2 kg Fully insulated fibreglass ladder Safety ladder for special tasks. Effective protection when working in electrical installations thanks to the sides being insulated with plastic reinforced with fibreglass. SAB no E no Length Weight, kg 64541251 E1652651 1.9 m 5.6 kg 64541253 E1652653 3.0 m 8.6 kg 64541255 E1652655 4.2 m 11.6 kg SAB ELTEKNIK AB PHONE +46 651-760 790 INFO@SABP.SE WWW.SABP.SE 27

SAB Elteknik offers a complete range of products for electricians. Whether you work with fibreoptics or power cables we provide materials. tools, instruments, machines, implements and safety equipment that help you in your work. Would you like advice or cannot find what you are looking for? Contact us, our job is to guide you to the right equipment. SAB Elteknik AB, Överlida Mjöbäcksvägen 2 512 60 Överlida, Sweden Phone +46 651-760 790 Fax +46 651-156 79 SAB Elteknik AB, Ljusdal Plåtslagargatan 27 827 35 Ljusdal, Sweden Phone +46 651-760 790 Fax +46 651-156 79 info@sabp.se www.sabp.se