SLAB SAW SERIES PARTS LIST MODELS: HP Part# 020 HP20 Part# 02020 HP2 Part# 0202 MADE IN USA MADE IN USA Revision 09.20 Manual Part No. 6269 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all times. Barranca Diamond Products, Inc. Storm Parkway Torrance, CA 900 Toll-Free: (00) 60-762 Phone: (0) 2-67 Fax: (0) 27-06 www.barrancadiamond.com
HP EXPLODED VIEW HP Slab Saw Part# 020 2 7 2 20 22 0 9 6 6 2 7 9 7 2 6 2 2 2 2 29 9 26 6 9 2 0 0 9 27 0 BOM SUBSTITUTION TABLE SUB PART # DESCRIPTION 6729 02020 HP-20 SLAB SAW.HP 6607 NUT, HEX, / - 6 0 2 SCREW, HEX HEAD, / - 20 X / 00 2 WASHER, FLAT, SAE, / 092 22 WASHER, / SPLIT LOCK 092 WASHER, FENDER, /6 X.0 0 6 NUT, HEX, 0-2 79 7 WASHER, FLAT, SAE, /6 7 NUT, HEX, / -20 9 9 WASHER, FLAT, SAE, / 9 6 0 SCREW, HEX HD, / - 20 X / 270 6 SCREW, / - 6 X -/2 HEX HEAD 2 7 2 SCREW, HEX HD, CAP, /-6 X 2-/ 29 WASHER, #0 SPLIT LOCK 6 2
HP EXPLODED VIEW HP Slab Saw Part# 020 COLLAR, SHAFT, /" I.D. WASHER, FLAT, SAE, #0 69 6 6 SCREW, PAN HD, CAP, / - 20 X /2 2 7 SCREW, FLAT HEAD, /-20X /2 PHIL 2 SCREW, SOC HD, CAP, /6 - X /2 69 9 SCREW, PAN HD SELF TAP - 2 X /2 662 20 BLADE, " 6729 2 SCREW, / - 6 X - / HEX HD 9 22 BEARING, FLANGE, 2-BOLT, " SHAFT 66 2 2 BUSHING, BRONZE FLANGED / X /2 X -/ 672 2 GEAR, SPUR, BRONZE " OD, RAW 677-RW 2 NUT, WING FLANGE / - 6 67 26 WHEEL, CASTER X -/ 62 2 27 WHEEL, CASTER X -/ 6279 2 2 NUT, HEX " -2 UNF 60 29 WELDMENT, TANK 66297 0 GUARD, BELT 6600 ASSY, VISE, HP- 6672 2 ASSY, HOOD 667 SHAFT, ARBOR, HP- 667 FLANGE, BLADE, " 6696 2 WINDOW, GUARD 6697 6 SWITCH, ASSEMBLY, ON/OFF 660 7 CORD, POWER ASSEMBLY, ON/OFF SWITCH 660 LEVER, ON/OFF SWITCH 66 9 CHAIN, ON/OFF SWITCH 662 0 GROMMET, ON/OFF LEVER 66 TABLE, ARBOR HOUSING 6660 2 WELDMENT, SPLASH HOOD 6669 COVER, GEAR BOX 6670 GAS SPRING 0LBS 66706 GAS SPRING 0 LBS, LOCKING 66707 6 LATCH, HOOD 669 7 SCREW, FLAT HD, PHILLIPS 0-2 X /" 6696 2 GASKET, BEARING 6709 9 ASSEMBLY, DRIVE SHAFT 6766 0 SCREW, SOC HD, 0-2 X / 677 2
HP PARTS LIST HP Slab Saw Part# 020 7 0 7 2 2 20 7 9 9 2 2 6 22 6 26
HP PARTS LIST HP Slab Saw Part# 020 NUT, HEX, /-6 0 2 2 PULLEY, 2-/ X / 66 WASHER, FLAT, SAE, / 092 2 WASHER, FENDER, /6 X.0 0 SCREW, HEX HD, CAP, /6- X / 69 6 6 WASHER, FLAT, SAE, /6 7 7 NUT, HEX, /-20 9 2 SCREW, HEX HD, TAP, /-20X 2676 9 SCREW, HEX HD, /6-X-/ 90 0 TAG, SERIAL NUMBER, BLANK 700-RW MOTOR,.HP 60HZ 72R.P.M. PH 6099 2 BELT, V A-60 62 PULLEY 6" OD. " BORE 677 PULLEY, STEP CONE,, X / BORE 67 PULLEY, V " X " BORE 600 6 SPRING, EXTENSION 627 7 CAP, FINISHING 6 2 MOUNT, MOTOR 66299 9 TENSIONER BRACKET 6696 20 SHAFT, TENSIONER 662 2 PULLEY, ASSEMBLY 6626 22 RING, RETAINING /2" 6627 2 BELT, V A- 669 27
HP EXPLODED VIEW HP/20 Assembly, Vise Part # 6672 9 2 7 7 0 6 WASHER, FLAT, SAE, / 9 2 2 SCREW, HEX HD, CAP, /-20X 2-/ 6607 SCREW, /6- X / SOCKET HEAD SET 70 NUT, HEX, NYLK, /-20 97 BUSHING, BRONZE FLANGED / X /2 X / 620 6 ROD, FEED /- X -/ 669 7 ROD, LENGTH SLIDE -/ X 6692 2 SHOE, CLUTCH COMPLETE 66 9 SUPPORT BAR, RIGHT 666 0 SUPPORT BAR, LEFT 667 ASSEMBLY, VISE 7070 2
HP PARTS LIST HP/20 Assembly, Hood Part # 667 9 7 6 2 0 NUT, HEX, /-20 9 2 WASHER, FLAT, SAE, / 9 SCREW, FLAT HD, /-20 X / 67 SCREW, PAN HEAD PHILLIPS 0-2 X /" 67 2 PULL HANDLE 60 6 WINDOW 66 7 GASKET, WINDOW 662 SCREW, PAN HD PHIL -2 X /" SEALING 6627 9 WELDMENT, HOOD 6629 0 CATCH, HOOD LATCH 677 29
HP2 HP2 Slab Saw Part# 0202 EXPLODED VIEW 9 7 0 9 29 20 2 9 7 9 2 2 22 2 6 6 27 6 6 7 0 2 2 2 0 26 6 7 2 9 2 NUT, HEX, / - 6 0 2 NUT, HEX, /6-096 SCREW, HEX HEAD, / - 20 X / 00 2 WASHER, FLAT, SAE, / 092 0 WASHER, / SPLIT LOCK 092 6 WASHER, LOCK, SPLIT, /6 77 7 WASHER, FLAT, SAE, /6 7 6 NUT, HEX, / -20 9 9 9 WASHER, FLAT, SAE, / 9 7 0 SCREW, HEX HD, / - 20 X / 270 6 SCREW, / - 6 X -/2 HEX HEAD 2 2 SCREW, HEX HD, CAP, /-6 X 2-/ 29 0
HP2 EXPLODED VIEW HP2 Slab Saw Part# 0202 COLLAR, SHAFT, /" I.D. SCREW, HEX HD, /6-X-/ 90 SCREW, FLAT HD, /-20 X / 67 6 SCREW, PAN HD, CAP, /-20 X /2 2 7 7 BLADE, 2 X.0, 0S 67 SCREW, FLAT HD, /-20X 727 9 SCREW, /-6 X -/ HEX HD 9 6 20 COLLAR, SHAFT / X /2 6066 2 BEARING, FLANGE, 2-BOLT, " SHAFT 66 2 22 BUSHING, BRONZE FLANGED / X /2 X -/ 672 2 GEAR, SPUR, BRONZE " OD, RAW 677-RW 2 NUT, WING FLANGE / - 6 67 2 WHEEL, CASTER X -/ 62 2 26 WHEEL, CASTER X -/ 6279 2 27 WELDMENT, TANK 690 2 WELDMENT, BELT GUARD 69 29 TABLE, ARBOR 69 0 NUT, HEX "-2UNF 60 SWITCH, ASSEMBLY, ON/OFF 660 2 CORD, POWER ASSEMBLY, ON/OFF SWITCH 660 LEVER, ON/OFF SWITCH 66 CHAIN, ON/OFF SWITCH 662 GROMMET, ON/OFF LEVER 66 6 COVER, GEAR BOX 6670 7 LATCH, HOOD 669 SCREW, FLAT HD, PHILLIPS 0-2 X /" 6696 2 9 GASKET, BEARING 6709 0 ASSEMBLY, DRIVE SHAFT 6766 ASSY, VISE 676 2 GASKET, GEAR BOX 677 SHAFT, ARBOR, HP-2 6767 FLANGE, BLADE, " 609 2 ASSEMBLY, SPRING GAS LIFTING 6 2 6 PROP, HOOD 66 7 ASSY, HOOD 720
HP2 PARTS LIST HP2 Slab Saw Part# 0202 0 22 6 2 9 2 7 9 2 20 7 2 6 2
HP2 PARTS LIST HP2 Slab Saw Part# 0202 NUT, HEX, /-6 0 2 2 PULLEY, 2-/ X / 66 WASHER, FLAT, SAE, / 092 2 WASHER, FENDER, /6 X.0 0 SCREW, HEX HD, CAP, /6- X / 69 6 6 WASHER, FLAT, SAE, /6 7 7 NUT, HEX, /-20 9 2 SCREW, HEX HD, TAP, /-20X 2676 9 SCREW, HEX HD, /6-X-/ 90 0 TAG, SERIAL NUMBER, BLANK 700-RW MOTOR,.HP 60HZ 72R.P.M PH 6099 2 PULLEY 6" OD. " BORE 677 PULLEY, STEP CONE,, X / BORE 67 BELT, A6 6229 SPRING, EXTENSION 627 6 CAP, FINISHING 6 2 7 MOUNT, MOTOR 66299 TENSIONER BRACKET 6696 9 SHAFT, TENSIONER 662 20 PULLEY, ASSEMBLY 6626 2 RING, RETAINING /2" 6627 22 PULLEY, 9" X " BORE 676 2 BELT, A7 709
HP2 EXPLODED VIEW HP2 Vise Assembly Part# 676 7 9 6 2 0 SCALE 0.7 WASHER, FLAT, SAE, / 9 2 2 SCREW, HEX HD, CAP, /-20X 2-/ 6607 SCREW, /6- X / SOCKET HEAD SET 70 NUT, HEX, NYLK, /-20 97 BUSHING, BRONZE FLANGED / X /2 X / 620 6 SHOE, CLUTCH COMPLETE 66 7 SUPPORT BAR, RIGHT 666 SUPPORT BAR, LEFT 667 9 ROD, VISE TRAVEL 6769 2 0 ROD, THREADED FEED 6772 ASSEMBLY, VISE HP-2/0 72
HP2 PARTS LIST HP2 Assembly, Hood Part # 720 2 7 6 WASHER, FLAT, SAE, / 9 2 2 SCREW, HEX HD, /-20 X / 270 NUT, HEX, NYLK, /-20 97 GUARD, SPLASH, NO LOGO 600-NL WELDMENT, HOOD 699 6 WINDOW 66 7 GASKET, WINDOW 662 SCREW, PAN HD PHIL -2 X /" SEALING 6627
SLAB SAW SERIES WARRANTY BARRANCA DIAMOND LIMITED WARRANTY Please complete the warranty registration card and return. Any problems encountered should be directed to Barranca Diamond Customer Service department at (00) 60-762 M-F am - pm PST. Barranca Diamond warrants to the original retail purchaser for a period of 90 days except as noted, from the date of purchase all products covered by this Warranty to be free of defects in materials and workmanship. This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives. This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its individual components is altered or modified by the purchaser or if the product is used in a manner or with a blade not recommended by the manufacturer. Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period specified above, and shall include proof of purchase. During said warranty period Barranca Diamond shall, at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are either returned to Barranca Diamond s facility or any authorized repair station and/or any replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty. Parts and labor needed to maintain products and the replacement of components due to normal wear and tear are the purchaser s responsibility and are not covered by this Warranty. All products or components replaced under warranty become the property of the manufacturer. All replacement parts will be considered to be part of the original product and any warranty on such parts will expire coincidentally with the original Warranty. Barranca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Diamond or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a charge for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith. IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN. The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or warranties applicable to the products it covers. All other warranties, including, without limitation, the implied warranty of merchantability and/or fitness for a particular purpose or use being denied. This limited warranty is expressly in lieu of all other warranties, whether expressed or implied. 6
SLAB SAW SERIES WARRANTY SPECIFICS APPLICABLE TO LIMITED WARRANTY OF DIAMOND BLADES AND CORE BITS Laser Welded Blade and Bit Warranty If the laser weld between the segment and the steel core or barrel fails during normal use, the blade or bit will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty. Brazed Blade, Bit, and Cup Wheel Warranty If the brazed bond between the segment and the core, barrel, or cup fails within the first.00 of segment wear, the blade, bit, or cup will be replaced free of charge. Blades, bits, and cup wheels damaged due to careless or improper use are not covered under this warranty. Continuous Rim Blade Warranty If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty. Exclusions Barranca Diamond does not warrant the following components, which carry their own manufacturer s warranty for the indicated periods: Electric Motors Manufacturer s Warranty ABB Baldor: year Ryobi: Year Soga: Year Gas Engines Manufacturer s Warranty Honda: 2 years Engine Power Information Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Barranca Diamond Products makes no claim, representation or Warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer s owner's manual and website for specific information regarding the engine power rating. 7
SLAB SAW SERIES SERVICE & WARRANTY REPLACEMENT PARTS Replacement parts for this tool may be ordered form your Barranca Diamond distributor or directly from Barranca Diamond. Please have the following information ready before calling: Model and serial number of the machine Date of purchase Description of parts being ordered (see attached parts list) RETURN MATERIALS PROCEDURE To expedite the service relative to the return of a product purchased through Barranca Diamond, please have the following information available: Model and serial number of the machine Date of purchase Distributor s name Then please call Barranca Diamond at (0) 2-67 or toll free at 00-60-762 to obtain a Return Goods Authorization number (RGA) authorizing the return. Please Note: Ensure your item(s) are prepaid to the destination Return items must have been purchased within the previous twelve (2) months Follow the packaging instructions in the following section Be sure to include the RGA number, return address and your phone number on or within the return shipping box. PACKAGING INSTRUCTIONS Ship the saw using its plywood shipping crate. Use wood screws to fasten the baseboard to the /2 plywood crate bottom so as to secure it inside the shipping crate.
NOTES 9
Barranca Diamond Products, Inc. Storm Parkway Torrance, CA 900 Toll-Free: (00) 2-0 Phone: (0) 9-22 Fax: (0) 9- www.barrancadiamond.com