GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed, Quiet Solenoid Design: Moving core immersed in hydraulic oil provides quiet pilot operation. Wiring: Electrical box with indicator lights and terminal strip connection standard. DIN coils available and provided with DIN connector. C DIN connectors supplied with indicator lights at no extra charge. Maintenance: Indicator lamps to diagnose connection; lug-in coils provide easy changing. High Reliability: Valve designed to last 0 million spool shifts under proper use. SD S GENERL SECIFICIONS Size Nominal @ psi Flow Rates @ 000 psi Maximum,, orts Operating ressure * ort-including Surges Internal Leakage @ 000 psi Maximum Cycle Rate Mounting Surface NF ISO Weight Single Solenoid Double Solenoid Operating Working emperature Conditions Operating Viscosity Max. Start-up Viscosity Filtration Recommended Fluids *000 psi available - specify external drain gpm (8 lpm) 80 gpm (00 lpm) 00 gpm (78 lpm) psi (5 bar) 600 psi (0 bar) 000 psi (0 bar) 000 psi (0 bar) 6 cu-in/ min (98 ml/ min) 50 cycles/ min.5..mr-.5..mr- ISO 0-08 ISO 0-07 9 lbs (. kg) 9 lbs (8.5 kg) 0 lbs (.5 kg) 0 lbs (9. kg) 0-60 0 F (5-70 0 C) 80-00 SUS (7 65 cst) 500 SUS (5 cst) 5 micron or less, (ISO 8/5) etroleum ased Fluids- ISO VG-68, Most Vegetable Oils
RESSURE DRO CURVES For continuous flow conditions or high cycling applications, a recommended max. flow rating is: / x maximum flow rating. Standard 5 VC Model Codes S--5-5 (ilot Valve D0S--5-5) Symbol Valve Spool ype Description ll orts locked/ Hydraulic Offset (Closed in ransition) Max. operating pressure psi (bar) Max. flow gpm (lpm) Flow ath S--5-5 (ilot Valve D0S-F-5-5) ll orts locked S-C-5-ED-5 (ilot Valve D0S-F-5-5) C to, & locked 65 S-F-5-5 (ilot Valve D0S-F-5-5) F to locked, & to 5 S-H-5-ED-5 (ilot Valve D0S-F-5-5) H ll orts Open S--5-5 (ilot Valve D0S--5-5) ll orts locked/ Hydraulic Detented (Closed in ransition) Maximum flows may be increased by 0% (except spool C) if 50 psi pilot pressure is maintained. External draining may be required where high tank line pressures exist (high flow)- the differential pressure between pilot pressure and back pressure at tank port should always be 70 psi minimum ilot/ Drain Configurations Spool Codes,, F Supplied Internal ilot & Internal Drain Standard Spool Codes C and H Supplied Internal ilot & External Drain Standard Use 70 psi back-pressure check valve in tank port to provide shifting pressure. External Drain- Specify ED Suffix External ilot- Specify E suffix Only use Hyvair plugs with short insertion depth.
DIMENSIONS - DIMENSIONL DRWING Units: mm (inches) dd.57 per Modular Valve (SC & SDC options), D0-N-, D0-FC- -MO, D0-R--.5K 5 (0.59) 9 (0.) 97 (.69) D0-FC- D0-N- 5 (.5) 9.9 (.57) 09 (.9) (Electrical ox) re Load Check (Spools C & H Only) External Drain D0-R--.5K Gauge ort 9.9 (.57) Main Valve 6 (.96) Subplate Remove lug for Internal Drain (.6) 70 psi Check Valve (0.57) 6 (0.) External ilot Remove lug for Internal ilot 5 (.09) 0 (0.79) (0.55) Y End Cap X 9 (.6) 7 (.6) Main Valve 77 (.0) 0 (5.)
DIMENSIONS - DIMENSIONL DRWING Units: mm (inches) (8.) 50.5 (5.9). (.7).9 (.69) 50.5 (5.9) Y 8.5 (.9) Y 96 (.78) x 0 (8.7). (.) x Cover X Y.6 (0.06).95 (.8) 69.9 (.) 9 (.58) Main Valve 9 (0.) 50 (.97) 0.6 (.0).6 (0.06) Single Valve Fastening: olts (/8-6 UNC x -/ ) 9.5 ft-lbs / GR 8 SHCS olts (/-0 UNC x -/ ) 5.9 ft-lbs / GR 8 SHCS O Rings: (metric) O-rings type. x.6 O-rings type 0.8 x.78 Required Surface Finish of Interface 0.000 /.0 in 0.0 / 00 mm (Rmax. ) INSLLION DIMENSIONS 7.5 (.8) 69.9 (.) 57. (.5) 55.6 (.9).9 (.7) 5.9 (0.6). (0.56).6 (0.06). (.) 8. (0.7) 0.6 (.0) 88. (.7) 76.6 (.0) 65.9 (.59) 50 (.97) G X L Y G (/ - 0 UNC) 7.5 (0.689) max. (0.57) (/8-6 UNC) 6. (0.8) max.
CROSS SECION CROSS SECION DRWING 0 5. 5. 9 9 C 7. C. 8 D D 6 ) Main Valve with Housing.) Return Spring 5.) Solenoid 9) Manual Override ) Main Control Spool ) ilot Valve 6) Spring Chamber 9) Manual Override.) Return Spring 5.) Solenoid 8) Spring Chamber 0) ilot Spool ORDERING INFORMION ORDERING EXMLE S- - 5 - Options - 5 S SD SC = Solenoid = Solenoid with Din Coil = Solenoid with *ilot Choke SDC = Solenoid with Din Coil & *ilot Choke = Single Solenoid position, spring offset = Double Solenoid position, spring centered = Double Solenoid position, no center, detented 5 = Single Solenoid position, spring centered = to, to = ll orts locked C = to, & locked F = locked, & to H = ll orts Open Voltage 5 0 Current = C D = DC *ilot choke valve, (D0FC--MO- meter out flow control), provides softer shifting. lso consider additionally using D0R--.5K pressure reducing valve if system pressure is above,000 psi. (See dimensional data) Options: E suffix for External ilot (x-port connection) ED suffix for External Drain (y-port connection) t least one of these options must be used on C & H spools unless re Load Check (standard) is used.