eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier to clean and to disinfect These sprockets can be used for belt widths up to 680 and temperature diefferences of maximum. For wider belts or bigger temperature differences, sprockets with square bores or round bore with two keyway have to be used. pecial shape of teeth compensates natural belt lengthening after prolonged use. 125000GF 125000F 25 125001F 12 98.0 98.14 44.7 125002F 35 125003F 40 125004GF 125004F 25 125005F 16 1.0 1.20 60.7 125006F 35 125007F 40 125008GF 125008F 18 146.0 146.27 68.8 25 125009F
eite 2 von 7 125010F 35 125011F 40 125012GF 125012F 25 125013F 20 162.0 162.37 76.8 125014F 35 125015F 40 *Plain Bore PROKET for belts series TANDARD PROKET DOUBLE KEYWAY Material: polyamide, DIN 6885 key seat. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. pecial shape of teeth compensates natural belt lengthening after prolonged use. Reduced noise level and quiet operation ompletely closed structure, easier to clean and to disinfect 125100GF 125100F 12 98.0 98.14 44.7 125101F 40 125102GF 125102F 16 1.0 1.20 60.7 125103F 40 125104GF 125104F 18 146.0 146.27 68.8 125105F 40
eite 3 von 7 125106GF 125106F 20 162.0 162.37 76.8 125107F 40 PROKET for belts series PLIT PROKET QUARE BORE Material: polyamide, screws in stainless steel. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. pecial shape of teeth compensates natural belt lengthening after prolonged use. ompletely closed structure, easier to clean and to disinfect. 125150F 125151F 125152F 125153F 125154F 125155F 125156F 125157F 125158F 125159F 125160F 12 98.0 98.14 44.7 16 1.0 1.20 60.7 18 146.0 146.27 68.8 20 162.0 162.37 76.8 Q x x x x PROKET for belts series
eite 4 von 7 TANDARD PROKET QUARE BORE Material: polyamide. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. pecial shape of teeth compensates natural belt lengthening after prolonged use. ompletely closed structure, easier to clean and to disinfect. 125200F 125201F 125202F 125203F 125204F 125205F 125206F 125207F 125208F 125209F 125210F 12 98.0 98.14 44.7 16 1.0 1.20 60.7 18 146.0 146.27 68.8 20 162.0 162.37 76.8 Q x x x x PROKET for belts series
eite 5 von 7 PLIT PROKET INGLE KEYWAY Material: reinforced polyamide, screws in stainless steel, nut in nickel plated brass. ompletely closed structure, easier to clean and to disinfect To order single keyway sprockets capable of floating freely on the shaft (i.e. bore tolerance +0.3 /+0.5), just add the letter "P" (=plus) to the existing part number. For example, code 1215P. B 1215 1216 35 16 120.0 1.0 1.2 60.7 1217 40 1218 45 1229 12 35 18 136.2 146.0 146.3 68.8 1231 40 1232 45 1243 1244 35 20 152.2 162.0 162.4 76.8 1245 40 1246 45 PROKET for belts series
eite 6 von 7 PLIT PROKET DOUBLE KEYWAY Material: reinforced polyamide, screws in stainless steel, nut in nickel plated brass. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. ompletely closed structure, easier to clean and to disinfect B 1219 1220 35 16 120.0 1.0 1.2 60.7 1221 40 1222 45 1233 1234 35 18 136.2 146.0 146.3 68.8 1235 40 1236 45 1247 1248 35 20 152.2 162.0 162.4 76.8 1249 40 1250 45 PROKET for belts series
eite 7 von 7 PLIT PROKET QUARE BORE Material: reinforced polyamide, screws in stainless steel, nut in nickel plated brass. These sprockets can be used on the drive and on the idler shaft. They float freely on the shaft. ompletely closed structure, easier to clean and to disinfect B 1223 x 16 120.0 1.0 1.2 60.7 1224 1237 x 18 136.2 146.0 146.3 68.8 1238 1251 x 20 152.2 162.0 162.4 76.8 1252