SUMMARY 1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 General characteristics Structure and description Applications Characteristics depending on circuit board 3 - Transfer capacity Page 9 Ribbed belt drive 5 - Dimensional characteristics Page 13 Grooved tube - M8 threaded shaft with screw on free end Roller with pulley for ribbed belt- M8 threaded shaft with screw on free end Roller with pulley for round belt - M8 threaded shaft with screw on free end Roller without drive - M8 threaded shaft with screw on free end 6 - Dimensional characteristics - miscellaneous Page 21 PVC sleeve Coated in natural rubber, nitrile rubber and polyurethane Crowned machining 7 - Belt conveyor application Page 22 Condition of use and recommendation Structure Transfer capacity Dimensional characteristics and weigth 8 - Mounting on the frames Page 28 9 - Wiring Page 3 With CB16BP circuit board With HB51BP circuit board 1 - Accessories Page 31 Ribbed belts Extension cables Rounded belts 24 VDC power supply 24 VDC distribution connector Round label Square label 2
1 - PRESENTATION OF THE POWER MOLLER PRODUCT RANGE Standard circuit board DC Brushless 9 transfer CB18 CB16 CB16B F-RAT-S HBR-65 CBM-15 CBR-36 CB3 45 transfer CBM-15 External circuit board Integrated circuit board POP-UP CBM-15 CBR-36 ZPA circuit board Ø32 Ø5 HB51 HBK-68 HB51B PM32 HS Ø5 CB18 PM5 ME PM5 XE B&W AS-i 3. Wenglor Molex B&W AS-i 3. Wenglor Molex Module circuit board PM5 FE PM5 VE CBM-15 HB51 IB-E IB-P PM5 XP PM5 XK B&W AS-i 3. Wenglor Molex PEPPERL-FUCHS AS-Interface HBR-65 CBR-36 PM5 FE-B CB16B HB51B PM5 XC PEPPERL-FUCHS AS-Interface Ø6,5 Ø6,5 Network controller PM65 FE CBM-15 HB51 IB-E PM65 XE B&W AS-i 3. Wenglor IB-E PM65 VE IB-P PM65 XP B&W AS-i 3. Wenglor Molex IB-P PM65 FE-B CB16B HB51B Corresponding circuit board PM65 KT CB3 HBK-68 Compatible module / sensor Max load to be conveyed 3 Mechanical brake version
2 - PRESENTATION OF THE SERIES technology 24VDC, used with circuit board CB16BP or HB51BP is designed for conveying light and medium loads for order preparation, distribution, and for assembly lines. This circuit board is separated from the gear-motor in order to optimize the performance, durability of the roller and to offer diverse functions such as pulse signals, acceleration/deceleration, optional position holder... The assembly can be controlled by PLC. General characteristics ELECTROMECANICAL CONTROL Direct current and brushless 24 VDC 24 VDC (+ /- 1 %) ripple ratio < 1 % Isolation class Continuous 1% Operation at 4 C Intermittent Brake Dynamic braking, then mechanical braking-operated Protection index Cable length 3 mm with JST connector - 9 pins Protection Thermal protection (>95 C for circuit board, >11 C for motor) Protection against induced voltage Environment Vibrations <,5 G Sound level Speed code 15 25 55 Reduction ratio 1/44,9 1/26,67 1/12,64 Brake s torque (Nm) 9,4 4,6 2,2 Absorbed brake power (W) 2,5 Absorbed current brake (A),21 Action time of the mechanical brake 2ms Connector Male 1-pin JST#S9B-XH-A Circuit board functions See the characteristics of CB16BP (page 7) and HB51BP (page 8) The PM5FE-B motorized roller is designed exclusively for indoor use. 4
motor side : Heat-treated and phosphated steel shaft Zamac (zinc, aluminium and magnesium alloy) endcaps free side : Ø15mm, Heat-treated and phosphated steel shaft Set screw Tube : Zinc plated steel Tube in precision cold drawn steel, ST37-2 quality, outer diam. 5 mm Zinc-coated or stainless steel (34L) MECANICHAL Pulleys : Stainless steel Ribbed Grooves Ribbed belts,8 teeth, Zamac (zinc, aluminium and or M8 threaded Round belts, diam. 4 or 5 mm with smooth Grooves : Grooves Grooves in different positions from 33 to 3 mm from the edge of the tube Depth 5,8mm Ø 4 or 5 mm Sleeve : Tapered Conical PVC sleeve (PP) for inner radius (Ri) 8 or 85 mm Grey/black PVC sleeve thickness 2 or 3 mm (58 ShA) PVC Lagging : Polyurethane Polymerized polyurethane coating, thickness 3 mm, 9 ShA, grey Natural rubber / nitrile Natural hot vulcanized rubber coating, thickness 3 mm, 6~65 Sha 5
Structure and description Shaft at free end Tube Noise and shock aborber bearing at motor end Shaft at motor end Shield with double bearing at free end Applications Drive wheel Planetary gear unit Motor Hall effect sensor Noise and shock aborber Power cable STOP STOP STOP STOP Zero pressure accumulation (ZPA) Position holding Stopping distance controlled by pulsed signal (CB16BP) Lift Cross transfer Turn table Lift table 6
Characteristics depending on circuit board WITH CB16BP E LECTROMECHANIC C ONTROL Motor CHARACTERISTICS SPEED CODE 15 SPEED CODE 25 SPEED CODE 55 Absorbed power (W) Tangential force (N) Operation Brake Direct current and brushless 24 VDC nominal 25-67,2 start-up 96 nominal 133,9-143,9 78-86 42,8-46 start-up 349,8 225 111,8 Type Mechanical braking then dynamic braking-operated Absorbed power (W) 2,5 Torque (Nm) 9,4 4,6 2,2 Speed (m/min) no load 2,2-17,4 3,7-29,3 7,7-61,7 nominal 2,2-13,3 3,7-25,4 7,7-47,3 (Contact us for other classes) Lenght 35 to 12 mm 325 to 12 mm 325 to 12 mm 3-12 mm = 65-15 kg per roller Selection of rotation direction Start / Stop, Direction of rotation By dip switch (CW/CCW) or input signal 2 speeds with a rotating switch Speed setting Acceleration / Deceleration Adjustable with potentiometer from to 2,5s Servo-brake activation Pulse signal output (imp./tour) 89,9 53,34 25,28 Over-heating, wiring error, under-voltage, over-voltage... Protection Against polarity reversal /24V and power backfeed, fuse, integrated thermal protection 7
E LECTROMECHANIC Motor WITH HB51BP CHARACTERISTICS SPEED CODE 15 SPEED CODE 25 SPEED CODE 55 Absorbed power (W) Tangential force (N) Operation Brake Direct current and brushless 24 VDC nominal 29,3-6 28,8-61,9 29,3-6 start-up 96 nominal 118,6-127,1 67,7-75, 37,9-4,6 start-up 349,8 225,5 111,8 Type Mechanical braking then dynamic braking-operated Abesorbed power (W) 2,5 Torque (Nm) 9,4 4,6 2,2 Nominal speed (m/min) no load 4,3-17,4 7,3-29,3 15,4-61,7 nominal 4,3-13,9 7,3-26,3 15,4-49,4 (Contact us for other classes) Lenght 35 to 12 mm 325 to 12 mm 325 to 12 mm 3-12 mm = 65-15 kg per roller Speed setting Sensor output signal Protection 1 speeds with a rotating switch Over-heating, wiring error, under-voltage, over-voltage... Recovery sensor state for PLC Against polarity reversal /24V and power backfeed, fuse, integrated thermal protection C ONTROL Sensor timer Run holding timer Jam timer Transfer mode Transfer direction and logic Synchronization function Speed control block area Timing sequence of the motorized roller depending on the sensor status of the downstream zone Timing sequence of the motorized roller depending on the sensor status of the zone to be left Jam/blockage detection of the load depending on the sensor status time Selection of train mode or singulation mode by dip switch Synchronization of several motorized rollers in the same zone The forced start enables evacuating the load of the last zone Speed variation simultaneous and synchronized of several motorized rollers Contact us 8
3 - TRANSFER CAPACITY Driven by ribbed belts WITH CB16BP PM5FE-B 15m/min PM5FE-B 25m/min Poids Load de weight la charge (kg) (Kg) 8 7 6 5 4 3 2 1 25 5 75 1 Duty Facteur cycle de marche (%) (%) Load Poids weight de la charge (kg) (kg) 45 4 35 3 25 2 15 1 5 25 5 75 1 Duty Facteur cycle de marche (%) % Load weight (kg) Poids de la charge (kg) 25 2 15 1 5 PM5FE-B 55m/min 25 5 75 1 Duty Facteur cycle de marche (%) % Load to transport 9 slave rollers driven by 1 motorized roller These curves are given as a guide. Transfer capacity depends on the nature and quality of the transported Due to the maximum static load of the PM5FE which convey more than 3 kg but the above curves are giving an idea of the theorical limits of the PM5FE. 9
WITH HB51BP 6 PM5FE-B 15m/min 35 PM5FE-B 25m/min 5 3 Load Poids weight de la charge (kg) (kg) 4 3 2 1 Load weight (kg) Poids de la charge (kg) 25 2 15 1 5 25 5 75 1 Duty cycle (%) Facteur de marche (%) 25 5 75 1 Duty cycle (%) Facteur de marche % Load weight (kg) Poids de la charge (kg) 18 16 14 12 1 8 6 4 2 PM5FE-B 55m/min 25 5 75 1 Duty cycle (%) Facteur de marche % Load to transport 9 slave rollers driven by 1 motorized roller These curves are given as a guide. Transfer capacity depends on the nature and quality of the transported Due to the maximum static load of the PM5FE-B giving an idea of the theorical limits of the PM5FE-B. 1
4 - PRESENTATION OF THE DIFFERENT FIXING OPTIONS FREE SIDE FIXING MOTOR SIDE FIXING Ref : A-71-G / A-81-G (optional) Ref : P-B1 / P-C1 (obligatory) Screw M8 x 14 (obligatory) Ref : P-B1 / P-C1 (obligatory) Ref : A-71-G / A-81-G (obligatory) Ref : A-71-G / A-81-G (optional) Ref : A-71-G / A-81-G (obligatory) Ref : C-71 / C-81 (optional) Ref : P-B1 / P-C1 (obligatory) Ref : P-B1 / P-C1 (obligatory) Screw M8 x 14 (obligatory) Ref : C-71 / C-81 (optional) Ref : C-71 / C-81 (optional) Ref : C-71 / C-81 (optional) 11
Note : Nut ref. FEY1 should be used with the claw plate ref. P-B1 or P-C1. 2 nuts M5 2 nuts M5 2 spring washer M5 2 spring washer M5 Ref. C-71 Ref. C-81 2 nuts M5 2 spring washer M5 2 spring washer M5 2 nuts M5 12
5 - DIMENSIONAL CHARACTERISTICS Grooved tube - Hexagonal shaft with spring on free end PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 or Ref. C-71 Ref. C-81 STEEL TUBE Speed code Dimensions PM5FE-B (5EB) Grooves for steel tube Dimension (B) Tube lenght (L) Depth = 5.8mm G mini G1 mini G2 mini G1+G2 max 15 25 / 55 STAINLESS STEEL TUBE Speed code WEIGHT / STATIC LOAD / AXIAL FORCE Grooves for stainless steel tube* Dimension (B) Tube lenght (L) Depth = 5,2mm G mini G1 mini G2 mini G1 + G2 max 15 25 / 55! For a single groove G2=.! *Stainless steel tube : For IP54 version Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,1 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,8 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,9 3, 3,1 3,2 3,5 3,6 3,8 3,9 4,1 4,3 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 13
Grooved tube - M8 threaded shaft with screw on free end PM5FE-B (5EB) PM5FE-B (5EB) STEEL TUBE Speed code Dimensions PM5FE-B (5EB) Grooves for steel tube Dimension (B) Tube lenght (L) Depth = 5.8mm G mini G1 mini G2 mini G1+G2 max 15 25 / 55 or Ref. C-71 Ref. C-81 STAINLESS STEEL TUBE Speed code Grooves for stainless steel tube* Dimension (B) Tube lenght (L) Depth = 5.2mm G mini G1 mini G2 mini G1+G2 max 15 25 / 55! For a single groove G2=.! *Stainless steel tube : For IP54 version WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,1 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,8 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,9 3, 3,1 3,3 3,4 3,6 3,8 3,9 4,1 4,3 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 14
Roller with pulley for ribbed belt - Hexagonal shaft with spring on free end PM5FE-B (5EB) or Ref. C-71 Ref. C-81 PM5FE-B (5EB) or Ref. C-71 Ref. C-81 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,3 3,5 3,7 3,8 4, 4,1 4,3 4,5 4,6 Weight 25m/min 3, 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 (Kg) 55m/min 3, 3,1 3,2 3,4 3,6 3,8 3,9 4,1 4,3 4,4 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 15
Roller with pulley for ribbed belt - M8 threaded shaft with screw on free end PM5FE (5EB) Vis M8 PM5FE (5EB) Vis M8 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,2 3,3 3,4 3,6 3,8 3,9 4,1 4,2 4,4 4,6 Weight 25m/min 2,9 3, 3,2 3,3 3,5 3,7 3,8 4, 4,1 4,3 (Kg) 55m/min 3, 3, 3,2 3,4 3,5 3,7 3,9 4, 4,2 4,4 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 16
Roller with pulley for round belt - Hexagonal shaft with spring on free end PM5FE-B (5EB) or Ref. C-71 Ref. C-81 PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 ou Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,3 3,5 3,7 3,8 4, 4,1 4,3 4,5 4,6 Weight 25m/min 3, 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 4,4 (Kg) 55m/min 3, 3,1 3,2 3,4 3,6 3,8 3,9 4,1 4,3 4,4 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 17
Roller with pulley for round belt - M8 threaded shaft with screw on free end PM5FE-B (5EB) (M8 bolt) PM5FE-B (5EB) - (M8 bolt) ou Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,2 3,3 3,4 3,6 3,8 3,9 4,1 4,2 4,4 4,6 Weight 25m/min 2,9 3, 3,2 3,3 3,5 3,7 3,8 4, 4,1 4,3 (Kg) 55m/min 3, 3,1 3,2 3,4 3,5 3,7 3,9 4, 4,2 4,4 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 18
Roller without drive - Hexagonal shaft with spring on free end PM5FE-B (5EB) or Ref. C-71 Ref. C-81 PM5FE-B (5EB) or Ref. C-71 Ref. C-81 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,8 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,8 3, 3,1 3,2 3,5 3,6 3,8 3,9 4,1 4,3 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 19
Roller without drive - M8 threaded shaft with screw on free end PM5FE-B (5EB) PM5FE-B (5EB) - or Ref. C-71 Ref. C-81 Speed code Dimension (B) Dimensions PM5FE-B (5EB) Tube lenght (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 35 4 5 6 7 8 9 1 11 12 15 m/min 3,2 3,3 3,5 3,7 3,8 4, 4,2 4,3 4,5 Weight 25m/min 2,7 2,9 3,1 3,2 3,4 3,6 3,7 3,9 4,1 4,2 (Kg) 55m/min 2,8 3, 3,1 3,3 3,4 3,6 3,8 3,9 4,1 4,3 Static load max (kg) 65 55 45 35 3 25 2 2 15 15 Axial force max (N) 29 2
6 - DIMENSIONAL CHARACTERISTICS - MISCELLANEOUS PVC sleeve Sleeved by compressed air Thickness L (mm) Ø (mm) D (mm) Hardness (mm) 2 54 5 ~58 shore A 3 56 Cylindrical tube Thickness L (mm) Ø (mm) D (mm) SL (mm) (mm) 2 54 5 1 3 56 Grooves tube Coated in natural rubber, nitrile rubber and polyurethane Material Characteristics Hardness (ShA) Natural rubber and reduces noise. Do not use in contact with hydrocarbon, oil or grease. 6~65 Nitrile rubber oil and grease. Polyurethane High resistance to abrasion, tearing and oil. 9 Thickness (mm) 3 L (mm) Ø (mm) D (mm) 5 56 Cylindrical tube L (mm) Ø (mm) D (mm) SL (mm) 5 56 1 Grooves tube 21
7 - BELT CONVEYOR APPLICATION Condition of use and recommendation Conveying direction Tension system always on the return roller Slider bed Different types of support table Roller table Motorized roller Shaft or holding roller Return roller Mount the motorized roller downstream of the conveying direction and the return roller upstream. Structure To resist to the belt tension, reinforced endcaps, with two precision ball bearings are mounted on the roller. 22
Transfer capacity SPEED CODE 15 Weigth Kg 4 Conveyor s length 5mm Weigth Kg 4 Conveyor s length 1mm 35 35 3 3 25 2 15 μ =,5 μ =,3 μ =,2 25 2 15 μ =,5 μ =,3 μ =,2 1 1 5 width 3 4 5 6 7 8 mm 5 3 4 5 6 7 width mm Weigth Kg 4 Conveyor s length 15mm Weigth Kg 35 Conveyor s length 2mm 35 3 25 2 15 1 μ =,5 μ =,3 μ =,2 5 width 3 4 5 6 mm 3 25 2 15 1 5 3 4 5 μ =,5 μ =,3 μ =,2 width mm 23
SPEED CODE 25 Conveyor s length 5mm Conveyor s length 1mm Weigth Kg 25 Weigth Kg 25 2 2 15 μ =,5 15 μ =,5 1 μ =,3 μ =,2 1 μ =,3 μ =,2 5 5 width 3 4 5 6 7 mm width 3 4 5 6 mm Weigth Kg 25 Conveyor s length 15mm Weigth Kg 18 Conveyor s length 2mm 16 2 14 15 μ =,5 12 1 μ =,5 1 μ =,3 μ =,2 8 6 μ =,3 μ =,2 5 width 3 4 5 mm 4 2 width 3 4 mm 24
SPEED CODE 55 Weigth Kg 12 Conveyor s length 5mm Weigth Kg 1 Conveyor s length 1mm 1 9 8 8 6 4 μ =,5 μ =,3 μ =,2 7 6 5 4 3 μ =,5 μ =,3 μ =,2 2 2 1 3 4 5 6 7 3 4 5 6 Conveyor s length 15mm Conveyor s length 2mm Weigth Kg 1 Weigth Kg 8 9 8 7 6 5 4 3 2 1 μ =,5 μ =,3 μ =,2 7 6 5 4 3 2 1 μ =,5 μ =,3 μ =,2 3 4 5 3 4 25
Dimensional characteritics and weigth Hexagonal plain shaft on motor side and hexagonal shaft with spring on free end Ref. C-71 or Ref. C-81 Speed code Dimension (B) Tube length (L) 15 25 / 55 or Ref. C-71 Ref. C-81 Speed code Dimension (B) Tube length (L) 15 25 / 55 WEIGHT / STATIC LOAD / AXIAL FORCE Tube length 3 4 5 6 7 8 15 m/min 2,7 2,9 3, 3,2 3,4 3,5 Weigth 25 m/min 2,5 2,7 2,8 3, 3,2 3,3 (Kg) 55 m/min 2,5 2,7 2,9 3, 3,2 3,4 Static max load (kg) 65 55 45 35 3 25 Axial force max (N) 29 26
Various machining, coating and sleeves are available to insure a proper centering and a good adherence. Tube machined crowned, zinc coated or stainless steel L (mm) C (mm) Ø (mm) d (mm) 6 5 49 1 Tube machined crowned with natural rubber coating / polyurethane, in steel or stainless steel. 3mm Thickness d L (mm) C (mm) Ø (mm) d (mm) D (mm) 6 5 55 56 1 Tube with centering sleeve, zinc coated or stainless steel. l Thickness (mm) L (mm) Ø (mm) D (mm) l (mm) 1 5 52 5 1/4 L 1/4 L 27
8 - MOUNTING ON THE FRAMES Mounting plate for plain 11.1 mm hexagonal shaft - FLAT ON TOP Conveyor with hole Ø12,1mm Reference Plate A-71-G Plate Reference C-71 Mounting plate for plain 11.1 mm hexagonal shaft - ANGLE ON TOP Conveyor with hole Ø12,1mm Reference Plate A-81-G Plate Reference C-81 28
Mounting plate for threaded hexagonal shaft - FLAT ON TOP Conveyor with hole Ø12,1mm Claw plate Nut Reference P-B1 Mounting plate for threaded hexagonal shaft - ANGLE ON TOP Conveyor with hole Ø12,1mm Claw plate Nut Reference P-C1 Conveyor with holes ø8,4mm Reference Bolt SP-M8-14 29
9 - WIRING With CB16BP circuit board The circuit board controls and protects the brushless motorized roller. With HB51BP circuit board Towards another HB51 motor control PLC 24 VDC Towards another HB51 circuit board The circuit board controls the motorized roller and manages the zones to ensure ZPA (zero pressure accumulation) 3
1 - ACCESSORIES Ribbed belt Pitch Pitch Pitch between the rollers (mm) For pulley Ø43mm Number of teeth 2 3 4 Load to be conveyed Load to be conveyed Load to be conveyed 53-56 Ref. 2PJ246-43 Ref. 3PJ246-43 Ref. 4PJ246-43 6-63 Ref. 2PJ256-43 Ref. 3PJ256-43 Ref. 4PJ256-43 64-65 Ref. 2PJ265-43 Ref. 3PJ265-43 Ref. 4PJ265-43 66-67 Ref. 2PJ27-43 Ref. 3PJ27-43 Ref. 4PJ27-43 71-72 Ref. 2PJ282-43 Ref. 3PJ282-43 Ref. 4PJ282-43 73-75 Ref. 2PJ286-43 Ref. 3PJ286-43 Ref. 4PJ286-43 76-78 Ref. 2PJ29-43 Ref. 3PJ29-43 Ref. 4PJ29-43 8-84 Ref. 2PJ32-43 Ref. 3PJ32-43 Ref. 4PJ32-43 87-91 Ref. 2PJ314-43 Ref. 3PJ314-43 Ref. 4PJ314-43 92-95 Ref. 2PJ316-43 Ref. 3PJ316-43 Ref. 4PJ316-43 97-11 Ref. 2PJ336-43 Ref. 3PJ336-43 Ref. 4PJ336-43 13-17 Ref. 2PJ346-43 Ref. 3PJ346-43 Ref. 4PJ346-43 115-118 Ref. 2PJ372-43 Ref. 3PJ372-43 Ref. 4PJ372-43 119-121 Ref. 2PJ376-43 Ref. 3PJ376-43 Ref. 4PJ376-43 123-128 Ref. 2PJ388-43 Ref. 3PJ388-43 Ref. 4PJ388-43 129-134 Ref. 2PJ416-43 Ref. 3PJ416-43 Ref. 4PJ416-43 142-147 Ref. 2PJ436-43 Ref. 3PJ436-43 Ref. 4PJ436-43 15-156 Ref. 2PJ442-43 Ref. 3PJ442-43 Ref. 4PJ442-43 157-161 Ref. 2PJ456-43 Ref. 3PJ456-43 Ref. 4PJ456-43 17-176 Ref. 2PJ486-43 Ref. 3PJ486-43 Ref. 4PJ486-43 196-22 Ref. 2PJ536-43 Ref. 3PJ536-43 Ref. 4PJ536-43 28-215 Ref. 2PJ57-43 Ref. 3PJ57-43 Ref. 4PJ57-43 254-258 Ref. 2PJ636-43 Ref. 3PJ636-43 Ref. 4PJ636-43 35-31 Ref. 2PJ746-43 Ref. 3PJ746-43 Ref. 4PJ746-43 Extension cables Length 1mm [.39"] 32.5mm [1.28"] 37mm [1.46"] 1 Pin Male M-F-EXT-1 PIN-LENGTH (MM) 1 Pin Female 6mm [2.36"] Lenght 12mm 27mm Part number of the extension cable 31
Rounded belts Pitch Pitch Pitch between the rollers 75mm 1mm Belt reference 24 VDC power supply Reference Input Output Power Start-up boost CT-1-241 24V-1A 24W 12% 38~48V QT-2-241 24V-2A 48W 15% 3 ph QT-4-241 24V-4A 96W 15% - Very weak inrush current. 24 VDC distribution connector 21 35 24-2 poles with markings «24V / OV» - 4 connectors per pole - Cable.5-4.mm (AWG...) Circuit board Reference Connector PD-2P Zone power cable Mains power supply 24VDC Ref. PD-2P Distribution connector 24VDC Power cable between zones 32
TOH D NK PM5 558BGSC1 1/14 1151 P54 24VDC 55m/mn S1 11 - PRODUCT IDENTIFICATION Round label 1 1 Product reference number 2 2 3 4 Month and year of manufacture Serial number 5 Power supply 3 6 Speed 7 6 5 4 7 Operation Square label 1 2 3 4 5 Product reference number Month and year of manufacture Serial number Power supply 6 7 Nominal intensity Absorbed power 8 Speed 7 Operation 1 B GSC1 Serie Speed code Tube lenght (L) Brake 33
ANNEX 1 INCORPORATION DECLARATION in accordance with the EC Machinery Directive 26/42/EC, Annex II B The manufacturer: 1146-2 Asazuma-Cho, Kasai, Hyogo 679-18 Japan Distributed in Europe by : hereby declares that the product series : PM5FE-B MOTORIZED ROLLER requirements of this Directive. Commissioning is prohibited until the whole machine/system in which it is incorporated is declared to be in compliance with the EC Machinery Directive 1146-2 Asazuma-Cho, Kasai, Hyogo 679-18 Japan EC Directives applied : 34
ITOH DENKI EUROPE S.A.S. 49 Av. des Jourdies E-mail : info@itoh-denki.com SUCCURSALE ITOH DENKI ANGLETERRE Suite 1 Trinity Space Centre Waldorf Way E-mail : info@itoh-denki.com WWW.ITOH-DENKI.COM 35 SUCCURSALE ITOH DENKI ALLEMAGNE Neumeyerstrabe 48 E-mail : info@itoh-denki.de