Motorized Pulley 80LS A very compact strong drive for small high use conveyors
|
|
- Blaze Chapman
- 5 years ago
- Views:
Transcription
1 Product description This Motorized Pulley is perfect for high torque applications with limited space or access. Characteristics Applications Salt water resistant aluminum bearing housings Small conveyors for feeding materials with Three phase AC induction motor frequent cycle Dual power supply Packaging equipment Integral motor protection Dynamic weighing equipment Hardened steel helical gear box Metal detectors Low noise operation Ideal for pharmaceutical industry Maintenance free Meat processing Lifetime lubrication Steel or plastic modular belts applications Reversible operation Dry, humid and wash down applications Reinforced internal shaft for RL exceeding 500 Motor Data Type of Motor Insulation class of motor windings Voltage Frequency Internal shaft sealing system Protection rate Thermal protection Ambient temperature, -phase motor General technical data Max. Roller length (RL) Technical data Asynchronous squirrel-cage, IEC (VDE 050) Class F, IEC (VDE 050) 0/00 V ± 5% (IEC /8) Special voltage on request 50/60 Hz Double-lipped, FPM OR nitrile rubber NBR IP66 Bimetallic Contact 0 C to +0 C 1000 All data and values declared in the catalogue refer to operation with a frequency of 50 Hz. 1
2 Materials The following Motorized Pulley components are available in different versions, as shown in the below chart, with further options for the material type as indicated. Component Version Aluminium Steel Material Stainless steelbrass/nickel Polymer Crowned Shell Cylindrical Cylindrical + key (for sprockets) Special crowns and grooves Standard End housing With V-grooves With O-grooves Shaft Standard Cross-drilled and threaded, M6 Straight connector Electrical connection Elbow connector Terminal box Shaft cap version. Please contact Rulmeca for further versions. Version - End Caps in stainless steel with PTFE lip seals. Options Rubber Lagging for standard belts Profiled lagging for plastic modular belts Profiled lagging for thermoplastic belts Sprockets for plastic modular belts Backstop / Anti run-back bearing Dynamic balancing Electromagnetic brake Rectifiers Encoder Food-grade Oil (EU, FDA and USDA) Non-horizontal mounting (more than ± 5 ) Note: The combination of encoder and electromagnetic brake is not possible. Accessories Mounting brackets Idler Pulleys Rollers for conveyors Shaft cap Frequency Converters 15
3 Technical data for Motorized Pulley 80LS - -phase - 50Hz Power [kw] Poles n. Gear Stages n. Gear Ratio i speed of the shell [m/s] revolutions of the shell [min -1 ] torque of Motorized pulley [Nm] tangential force [N] Max. belt tension T1+T [N] Min. Length RL [] 5,89 0,05 11, 16,0 91 0,0 8 7,78 0,07 16,1 11, ,88 0,08 19,8 9, 5,89 0,11 5,0 1,7 10 7,78 0,1 5,7 8, ,05 0,88 1, 0, 0,5,7 6,5 7, 5, ,8 90,6, ,16 0,5 110,8,9 70 5,89 0,10,9 6,6 68 7,78 0,1,1, ,88 1, 0, 0,5 1,7 60,7 15, 10, ,8 86,5 7, ,07 1,16 5,89 0,5 0, 105,9 51,5 6,0 1, ,78 0, 7,5 8, ,88 1, 0,8 0,55 90,0 10,8 7,1, ,80 6,6, ,16 1,00 8,,8 68 5,89 0, 51,5 1, ,78 0, 7,5 1, ,1 0,88 1, 0,8 0,55 90,0 10,8 1,1 8, ,80 6,6 5, ,16 1,00 8,,
4 Power Poles Standard weights for Motorized Pulley 80LS Standard weight [kg] for standard RL [] [kw] n , ,0,85,0,75 5,0 5,65 6,10 6,55 7,00 7,5 7,90 8,5 8,80 0,05,80,5,70,15,60 5,05 5,50 5,95 6,0 6,85 7,0 7,75 8,0 8,65 0,07 ---,80,0,5,85,70,0,15,75,60 5,0 5,05 5,65 5,50 6,10 5,95 6,55 6,0 7,00 6,85 7,5 7,0 7,90 7,75 8,5 8,0 8,80 8,65 0,1 ---,0,85,0,75 5,0 5,65 6,10 6,55 7,00 7,5 7,90 8,5 8,80 Cable specification Available cable options: Standard, Screened Standard, Unscreened Halogen-free, Unscreened Available lengths: 1//5 m. Min. length with option The following options increase the minimum length of the motorized pulley. Option Electromagnetic brake Encoder RL min with option RL min RL min
5 Standard Motorized Pulley with straight connector in stainless steel. Shaft Cap. Idler Pulley, stainless steel version (TS). Elbow Connector in stainless steel. Elbow Connector in Polyamide. Straight/Elbow Connector with shaft cap in stainless steel. Elbow connector with shaft cap in stainless steel. Terminal Box in Aluminium. Terminal Box in Stainless Steel.
6 Cable Connector 90 with threaded shaft. Cross-drilled and threaded shaft. Type/Option A B C D E F G H K L M N Q T Motorized pulley 80LS Standard version Straight connector in stainless steel 81,5 80,5 1,5 0 1,5 1,5,5 15 Elbow connector in stainless steel 1,5 5,5 8 Elbow connector in Polyamide 1,5 5 Cable Connector 90 with threaded shaft 1,5 6 Cross-drilled and threaded shaft 1,5 6,5 M6 Straight/Elbow Connector with shaft cap in Stainless Steel ,5 5 Elbow Connector with shaft cap in Stainless Steel 11 8 Terminal Box in Aluminium Terminal Box in Stainless steel 8 1,
DRUM MOTOR 113LP 113.5Ø 0.06kW kW, with planetary gearbox in polymer or polymer / steel combination for non-continuous operation
16 DRUM MOTOR UNIT HANDLING DRUM MOTOR 11LP 11.5Ø 0.06kW - 0.7kW, with planetary gearbox Product description This Pulley is the ideal operator for light and medium conveyors, for non-continuous use. Characteristics
More informationINTERROLL DRUM MOTOR 80i
Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles Packaging
More informationInterroll. Product Description. Material Versions. Technical Data. Options. Order Information. Accessories. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles
More informationInterroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
Product Description Material Versions Applications Characteristics This drum motor has been developed especially for applications requiring a strong drive. Small conveyors with high-duty cycles Airport
More informationRulmeca Moving ahead.
Motorized Pulleys 1 Rulmeca Moving ahead. Since its foundation in 196, the Rulmeca Group, headquartered in Bergamo (Almé), Italy, has grown to become one of the world s leading manufacturers of premium
More informationInterroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is outstandingly robust with a strong torque and can take a high radial load. Conveyors with high-duty cycles
More informationINTERROLL DRUM MOTORS HYGIENIC, ENERGY EFFICIENT AND SPACE SAVING MEX (55) QRO (442)
P PRODUCT R O D U C T I NINFORMATION F O R M A T I O N INTERROLL DRUM MOTORS HYGIENIC, ENERGY EFFICIENT AND SPACE SAVING INTERROLL Drum motor 80i Product Features Hardened steel helical spur gears Reinforced
More informationINTERROLL DRUM MOTOR 113S
DRUM MOTOR Product Description Material Versions Applications Characteristics The drum motor is a perfect drive station for small and medium-duty conveyor systems. Light-duty conveyors Packaging equipment
More informationD R U M M O T O R S. en-uk OCT/2014
en-uk OCT/2014 D R U M M O T O R S Table of Contents Table of Contents Which drum motor is suitable for your application? AC Asynchronous Motors AC- Permanent Magnet Synchronous Motors Page Woldwide Group
More information4 ed. MOT BU RULMECA GERMANY 05/10
Motorized Pulleys for belt conveyors BULK HANDLING Motorized Pulleys for belt conveyors 4 ed. MOT BU RULMECA GERMANY 05/10 BULK HANDLING Crushing & Screening A motorized pulley in its right element! RULMECA
More informationPlanning Section. Environmental conditions. Different power supply. Industrial solutions
Planning Section 86 89 Environmental conditions Different power supply 90 Industrial solutions 91 Power calculation and selection of the Motorized Pulley for package transportation 93 Oil types and contents
More informationMOTORIZED PULLEYS UNIT HANDLING
2 ED. MOT EN 03/14 2 ED. MOT EN 03/14 MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE MOTORIZED PULLEYS UNIT HANDLING GENERAL CATALOGUE AXIS & Stuifmeel BV Coenecoop 1 2741 PG Waddinxveen Netherlands
More informationvs. Conventional Chain or V-Belt Drive Systems: By Every Important Measure, It s No Comparison Compact...safer, cleaner operation
PRODUCT CATALOG # vs. Conventional Chain or V-Belt Drive Systems: By Every Important Measure, It s No Comparison Unlike conventional drive systems, the new DURA-DRIVE PLUS motorized pulley has no chains
More informationMotorized Pulley 400L, 400M & 400H, Ø 400 mm
otorized Pulley 400, 400 & 400, Ø 400 mm To match your requirements in diameter 400 mm, our product range offers three different loading performances for your BU applications: - for ight-duty - for edium-duty
More informationBULK HANLING. Motorized Pulleys for belt conveyors for bulk handling BULK HANLING. Konveijera lentas piedziņas trumuļmotori beramkravu pārvietošanai
BULK HANLING Motorized Pulleys for belt conveyors for bulk handling Konveijera lentas piedziņas trumuļmotori beramkravu pārvietošanai Моторбарабаны для привода конвейерной ленты для перемещения насыпных
More informationMotorized Pulley 500L, 500M & 500H, Ø 500 mm
Motorized ulley 500L, 500M & 500, Ø 500 mm To match your requirements in diameter 500 mm, our product range offers three different loading performances for your BULK applications: - L for Light-duty -
More informationSSV TM100 - SSV TM215 DRUM MOTORS 4.0" to 8.5" diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS
Engineered to Keep Your Business Running SSV TM100 - SSV TM215 DRUM MOTORS 4.0" to 8.5" diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS BELT PULL (BP) = (F0 + F1 + F2) Roller Bed Conveyor Slider Bed Conveyor
More informationMotorized Pulley 630M & 630H, Ø in. (630 mm)
Our 24.80 diameter Motorized Pulley range fers two different performance levels for BULK applications: - M for Medium duty - H for Heavy duty It is important to note the product differences and choose
More informationProduct information Drummotors TM Van der Graaf Power Transmission Equipment
Product information Drummotors TM 215-40 Van der Graaf Power Transmission Equipment The TM 215 s playground Introduction TM 215-40 A wide range of applications Van der Graaf has achieved a prominent position
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationTechnical Precautions for Design, Installation and Maintenance
The precautions below will enable conveyor engineers, system integrators, and end users to properly design, install, operate, and maintain conveyor systems using Rulmeca Motorized Pulleys. Ignoring any
More informationA6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationWeighfeeders SITRANS WW200
Introduction Overview is a low- to medium-capacity weighfeeder used for minor ingredient additives. Benefits High accuracy Ideal for low- to medium-capacity loads Fast installation, easy to clean and maintain
More informationMotorized Pulley 138E, Ø 138 mm
Mtrized Pulley 138E, Ø 138 mm Mtrized Pulley 138E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 138 mm nly. With a min RL f 300 mm and and pwers ranging frm 0.10 t 075kW
More informationProduct information Drummotors TM 215B50. Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 215B50 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 215B50 s playground Introduction TM 215B50 A wide range of applications Van der Graaf has
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationProduct information Drummotors TM Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 315-40 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl Benefits TM 315-40 A wide range of applications Van der Graaf has achieved a prominent position
More informationProduct information Drummotors TM Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 315-50 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 315 s playground Introduction TM 315-50 A wide range of applications Van der Graaf has achieved
More informationProduct information Drummotors TM Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 215-30 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 215 s playground Introduction TM 215-30 A wide range of applications Van der Graaf has achieved
More informationCPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationWashdown & Sanitary Conveyors
Washdown & Sanitary Conveyors Sanitary Dyna-Belt Conveyors Power Belt Series Capacity: Mid Range Effective Belt Width: 3 to 36 OAL 24 to 100 Design Type: Modular, Kitted Construction : Modular Washdown
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationHAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis
More informationProduct information Drummotors TM 100B25. Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 100B25 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 100 s playground Introduction TM 100B25 A wide range of applications Van der Graaf has achieved
More informationAutoweigh Feeder Series 400 A New Generation of Weigh Feeders
Autoweigh Feeder Series 400 A New Generation of Weigh Feeders Simply The Best Narrow Width Weigh Feeder Money Can Buy Precise Measurement The Milltronics 400 Series is one of the most accurate in-motion
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationTHREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE
CAG Electric Machinery HGLIE2 series THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE Introduction Motors HGL IE2 with cast iron frame offers increased power output with reduced power consumption. This
More informationCast Iron Frame Motors For Zone 21 Improved Efficiency EFF2
Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:
More informationProduct information Drummotors TM Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 127-25 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 127 s playground Introduction TM 127-25 A wide range of applications Van der Graaf has achieved
More informationCLEATED INCLINE CONVEYOR OPERATION MANUAL
CLEATED INCLINE CONVEYOR OPERATION MANUAL SERIAL NO. DATE OF MANUFACTURE EQUIPMENT DESCRIPTION CLEATED INCLINE CONVEYOR The Cleated Incline Conveyor is a portable belted feed device. It is designed to
More informationProduct information Drummotors TM Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 400-60 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 400 s playground Introduction TM 400-60 A wide range of applications Van der Graaf has
More information3947 en / b
3947 en - 06.2006 / b FOOD INDUSTRY Drive systems As a worldwide specialist in drive systems, industrial processes and generators, LEROY-SOMER has supported its customers evolving needs for more than 80
More informationHelical Gear Motors BEGE Type G & M. Your drive, our (trans)mission. BEGE Power Transmission
Helical Gear Motors BEGE Type G & M BEGE Power Transmission Anton Philipsweg 30 2171 KX Sassenheim The Netherlands T: +31 252-220 220 E: bege@bege.nl W: www.bege.nl Your drive, our (trans)mission General
More informationAC motors DR J (LSPM technology) / DRL / DRK / DRM
AC motors DR J (LSPM technology) / DR series: Type DR J (LSPM) variant NEW Line Start Permanent Magnet Motor The synchronous motor variant DR J (LSPM technology) is integrated in the modular DR motor system
More informationELECTRIC VIBRATORS SPV & SPC
ELECTRIC VIBRATORS FOR INDUSTRY SPV & SPC SERIES 1 THE PRODUCT The Newest Design in the World: a range of Electric Vibrator Motors designed and built by vibration engineers and specialists, incorporating
More informationVan der Graaf Power Transmission Equipment
Van der Graaf Power Transmission Equipment Benefits What is a Drummotor? Long life span The Van der Graaf Drummotor is a one component conveyor drive which houses all components internally, eliminating
More informationMcKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements.
McKenzie Handling Systems has been designing and manufacturing standard and custom belt conveyors since its incorporation in 1985. Belt types for all your applications Permanently Sealed Bearings T-slots
More information- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
More informationPACKAGED PROCESSED RAW MATERIALS. Red Meat. Type Construction. Frame. Belt. Modular. Belt. Stainless Steel. Plastic Stainless Steel.
CONVEYOR OVERVIEW From packaging to processing, Dorner has the food industry covered. By offering three series of sanitary conveyors AquaGard, AquaPruf and AquaPruf Ultimate Dorner can meet virtually any
More informationThree-phase asynchronous motors
Three-phase asynchronous motors for low voltage with squirrel-cage rotor Product specification Series K11R, K21R and K22R Introduction Standards and regulations Progressive correspondence between output
More informationOnline data sheet DFS60B-S4EL00800 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4EL00800 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4EL00800 1053600 Other models and accessories www.sick.com/dfs60
More informationLARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
More informationFCR asynchronous brake motors LS FCR. General information
General information LIFTING USE : U.L. Enclosed three-phase asynchronous brake motors, LS series with failsafe brake, according to IEC 34, 72, EN 50281. Single speed : 0.55 to 15, frame size from 80 to
More informationBEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater.
GENERAL SPECIFICATION INTENT The equipment to be supplied by manufacturer includes the screw pumps, support for the drive unit, profile plates, motors, gearboxes, couplings, guards, upper and lower bearing
More informationTYPE 2 poles 4 poles 6 poles 8 poles 2 / 4 poles 4 / 8 poles 2 / 8 poles 4 / 16 poles
BAH-BAHS series Overwiew MGM Electric Motors was established in 1950 as a brake motors manufacturer. MGM is today a world leading manufacturer of this line of products. MGM brake motors are designed and
More informationtechnology made in Italy
technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
More informationMINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
More informationAsynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
More informationProduct information Drummotors TM 620A75. Van der Graaf Power Transmission Equipment.
Product information Drummotors TM 620A75 Van der Graaf Power Transmission Equipment www.vandergraafpte.nl The TM 620 s playground Introduction TM 620A75 A wide range of applications Van der Graaf has
More informationTM315 - TM500 DRUM MOTORS 12.5" to 20.0" diameter 1.5 to 40 hp HEAVY-DUTY
Engineered to Keep Your Business Running TM315 - TM500 DRUM MOTORS 12.5" to 20.0" diameter 1.5 to 40 hp HEAVY-DUTY BELT PULL (BP) = (F0 + F1 + F2) Roller Bed Conveyor Slider Bed Conveyor F0 = 0.04 (2P
More informationEasy Slide Rails ov -easy_slide_divider - U pdated
Easy Slide Rails ov-easy_slide_divider - Updated - 18-09-2017 163 Easy Slide Rails Easy Slide Rails Introduction The Easy Slide family of linear rails have a compact cross-section and low-friction movement.
More informationMTF. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz
More informationGMP-Type. Key Features: Integrated Motor-Pump Units
Integrated Motor-Pump Units GMP-Type Key Features: Direct coupling between motor and pump Rotation: Right (viewed from shaft end) Electric motor mounting type: special B3-B14 (IEC 34-7) Rated Voltage:
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationELK PRODUCT CATALOGUE. elkmotor.com.tr
ELK 0501-0418 PRODUCT CATALOGUE elkmotor.com.tr THREE PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS ELK Motor has been founded by major shareholders of Yılmaz Reduktor, as a continuation of the product family.
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
More informationStandardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
More informationIndex. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14
Index A AC motors Mounting position designations... 89 Additional documentation... 12 Add-on encoder cables... 579, 585 Anti-condensation heating... 500 B Backstop... 471 BE brake technical data... 375
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X
More informationOnline data sheet. DBS60E-S4EP05000 DBS60 Core INCREMENTAL ENCODERS
Online data sheet DBS60ES4EP05000 DBS60 Core DBS60ES4EP05000 DBS60 Core A B C D E F Ordering information Type Part no. DBS60ES4EP05000 1071649 Other models and accessories www.sick.com/dbs60_core Illustration
More informationFull SpeciFicationS. FeATUReS & BeNeFITS ORDeRING INFORMATION
Full SpeciFicationS FeATUReS & BeNeFITS ORDeRING INFORMATION index introduction Sanitary Overview Chart 4 COnveyOr COmpariSOn / SeleCtiOn Chart 6 the DOrner advantage 8 aquagard 7200/700 SerieS 0 7200
More informationMVSI. Technical features
MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,
More informationOff-Line Filter BNF. FluidControl
FluidControl Off-Line Filter BNF In hydraulic systems oil transfers power and motion, and in drives it s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated by friction
More informationOnline data sheet DFS60B-S4CA08192 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4C08192 DFS60 B C D E F Illustration may differ Detailed technical data Performance Ordering information Type Part no. DFS60B-S4C08192 1038099 Other models and accessories www.sick.com/dfs60
More informationServomechkaramoottorit
Solutions for power transmission Servomechkaramoottorit www.konaflex.fi INDEX 1 Servomech 1. THE PRODUCT 1.1 SERVOMECH Linear Actuators......................... Page 2 1.2 SERVOMECH Linear Actuators range............................
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationSquirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2
Marine Motors Three Phase Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES 63-400 SIZES MarelliMotori ASI.CT.033.2 CONTENTS Page STANDARDS 5 ESSENTIAL AND NON-ESSENTIAL SERVICE 5 CLASSIFICATION
More informationBAKERY SNACK FOODS CONFECTIONARY FRUITS VEGETABLES NON-PROTEIN READY-TO-EAT 7400U 7400U. Conveyor Selection Chart. AquaGard.
CONVEYOR OVERVIEW From packaging to processing, Dorner has the food industry covered. By offering three series of sanitary conveyors AquaGard, AquaPruf and AquaPruf Ultimate Dorner can meet virtually any
More informationLow Voltage Induction Motors
Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,
More informationOff-line filter / cooler unit BKF
FluidControl Off-line filter / cooler unit BKF In hydraulic systems oil transfers power and motion, and in drives it s a vital lubricant. Both as a power transfer medium and as a lubricant, oil is heated
More informationIndex. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options
belts SOMEFI is a company dedicated to the manufacture and sale of conveyors and modular handling equipment. For more than 40 years SOMEFI has offered a complete range of industrial conveyors, of flexible
More informationDCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
BELT CONVEYOR Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. MASS [Kg] STROKE T STROKE LENGTH STROKE LENGTH. standard brake CODE
BALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS BSA 10 AC motor Stroke La =Lc + Stroke Lc Capacitor T Rear bracket SP Pin Standard head with threaded hollow bore BA 80 depth 17 Stroke end reed switches FCM
More information- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
More informationCorrosion Resistant Fiberglass Submersible Pumps. EU product Made in Italy
EU product Made in Italy Corrosion Resistant Fiberglass Submersible Pumps ARGALSUB - SUBMERSIBLE PUMPS IN COMPOSITES Argal proposes in this catalog its new range of submersible pumps made in Fiber Reinforced
More informationMomentum. Technologies GmbH IE 4. oil-less. MTS113 MTS114 Synchronous Drum Motor. Partner Company. Efficiency. Momentum MTS113 MTS US
MTS113 MTS114 Synchronous Drum Motor oil-less Partner Company MTS113 MTS114-201701-01-US Efficiency IE 4 MTS113 MTS114 Synchronous Drum Motor Characteristics Nominal Diameter (in) 4.45 oil-free (no leakage)
More informationTeSys contactors 5. Characteristics 5. Mini-contactors TeSys LC1 SK and LP1 SK. Environment Rated insulation voltage (Ui) 5/30
Characteristics TeSys contactors Mini-contactors TeSys LC SK and LP SK Environment Rated insulation voltage (Ui) Conforming to 0, VDE 00 gr C,BS, CSA - n, UL 0 V 0 Conforming to standards IEC 0, NF C -0,
More informationWEIGH SYSTEM WS 1 kg M CD with Weighing Electronics Unit EWK 3010 / 3015 TS
GENERAL DESCRIPTION The WS 1 kg M CD weigh system, with its integrated infeed and outfeed belts, forms, in conjunctions with a type EWK 3010 or EWK 3015 TS weighing electronics unit, a high-performance
More informationThree-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC.
Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC Product summary VEM motors GmbH Introduction Roller table motors are
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationApplication Mini Contactors for Motors and Resistive Loads
Delivery program Contactor, 4p, 4kW/400V/AC3 Part no. DILEM4-G(24VDC) Catalog No. 012701 Eaton Catalog No. XTMF9A00TD Product range Contactors Application Mini Contactors for Motors and Resistive Loads
More informationAV-W. Wind Speed and Wind Speed & Direction Sensors
Page 1 of 5 AV-W Wind Speed and Wind Speed & Direction Sensors Features: Benefits: Supplied with mounting bracket Wind speed accuracy ±2% Anodized aluminum housing Ideal for naturally ventilated building
More informationDYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors
Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet 0.75 kw to 400 kw Technical catalogue 4936 en - 2012.10 / b Rectifier Simplicity Performance Install and start using your system quickly
More informationPresentation Soft starters 0 Altistart 48 soft start - soft stop units
Presentation Soft starters 5 6 7 65_Ver.-EN.fm/ Presentation (continued) Soft starters Applications The Altistart 8 soft start - soft stop unit is a controller with 6 thyristors which is used for the torque-controlled
More informationMomentum. Technologies GmbH IE 4. oil-less. MTS82 Synchronous Drum Motor. Partner Company. Efficiency. Momentum MTS US
MTS82 Synchronous Drum Motor oil-less Partner Company MTS82-201704-01-US Efficiency IE 4 MTS82 Synchronous Drum Motor Characteristics Nominal Diameter (in) 3.21 oil-free (no leakage) Nominal Power (HP)
More information