Hydraulics H Y D R A U L I C S
Guarantees from a leading... BUT DIFFERENT COMPANY Companies tend to communicate values such as excellence, quality, commitment, honesty or customer service... At AirControl we sincerely believe that it should not be necessary to highlight them, because they should always be present at any company. We want you to know us beyond our excellence, quality, commitment, honesty and customer service, we are AirControl, we are approachable and interactive in our customer relations. We are defiant in the face of any challenge, agile and surprising when presenting solutions. Given that we have been surprising people since 1962, we consider ourselves to be leaders in the manufacture of special products, tailor-made products, created to solve specific problems. We are rigorous, both in terms of the manufacturing process and in terms of our company organisation, and possess extensive quality controls. We are youthful: our team, our style and corporate identity, our way of working and dealing with our customers. But above all, we are people, just like you. We are clear that when dealing with companies, we are above all dealing with people. We want our customers to really notice that they matter to us, that we are close, from the start of a project to its after-sale service.
8 reasons to place your trust in AirControl The breadth and depth of our experience enables us to tackle any project. We are consultants, in addition to manufacturers and distributors. We can provide our customers with advice, with the aim of always offering the most efficient technical and economic solution. We have full control over design and production processes. We are not part of an international group. We are an independent brand, and this enables us to make our own decisions and which provides us with greater flexibility. We advocate direct and fluid communication with our customers. We work in project groups, to ensure that everyone who is involved in the supply chain is kept up to date at all times. We only use high quality components, and subject our suppliers to strict quality controls. Our success as a company is directly linked to the success of our customers. 3
Index Hydraulic Cylinders HR Series ISO 20/1 HT Series ISO 20/2 ISO 30 HV Series Page 5 Page 17 Page 33 Accesories Special Cylinders Page 39 Page 42 4
HR Series Round Cylinders / ISO 20/1-1 bar Technical characteristics Standard ISO 20/1 Construction type Rated pressure Test pressure With flange and screws 1 bar 2 bar Ambient temperature -20ºC +ºC -20ºC Fluid temperature -20ºC +ºC Fluid type -20ºC +1ºC with Viton seals +1ºC with Viton seals Mineral oil fluid - Other fluids on demand Piston (mm) 1 2 0 Piston Rod (mm) 14 1 1 0 0 0 Maximum speed (m/s) - standard seals Maximum speed (m/s) - low-friction seals 0,5 0,4 1 5
HR Series Round Cylinders / ISO 20/1-1 bar Codification Series ISO 20/1 Revision Piston Piston rod version A Small Rod B Big Rod C Big Rod w/strengthened thread Stroke Variations N No cushioning A Front and rear cushion * D Front cushion T Rear cushion B Double rod with cushion P Double rod without cushion HR A *** * **** * * * * * * * * Inductive sensor position N No detection * 1 2 3 4 Cushion screw position 0 No cushioning 1 2 3 4 * Air bleeds position 0 No air bleeds 1 2 * 3 4 Fixations 0 Basic design A MF1. Front square flange mounting B MF1. Rear square flange mounting C MF3. Front round flange mounting D MF3. Rear round flange mounting E MP3. Eye mounting F MP5. Spherical eye mounting G MT4. Intermediate trunnion H MS2. Foot mounting Port position 1 * 1 2 3 4 2 4 3 Piston rod material C C chromed S C with nickel-chrome K Stainless steel Sealing 0 Standard, medium friction * 1 Low friction 2 Low friction, high temperature A spacer is installed for stokes higher than 0 mm Overall length of the cylinder increases this way: 1-10: +mm total length 11-0: +mm total length 1 20: +1mm total length 21 00: +mm total length * Default option 6
HR Series ISO 20/1 Hydraulic Cylinders Basic design Ø ØMM ZJ 14 1 1 1 205 4 2 0 3 1 3 1 0 1 2 0 5 0 0 0 6 KK 6g A máx. M12x1, 16 M12x1, 16 M14x1,5 M14x1,5 M14x1,5 M16x1,5 M16x1,5 M16x1,5 M20x1,5 M20x1,5 M20x1,5 M27x2 M27x2 M27x2 M33x2 M33x2 M33x2 M42x2 M42x2 M42x2 M48x2 M48x2 M48x2 M64x3 85 M64x3 85 M64x3 85 Mx3 95 Mx3 95 Mx3 95 Mx3 112 Mx3 112 Mx3 112 Mx4 Mx4 Mx4 M1x4 1 Y PJ ØD máx. VE máx. WF 58 77 64 89 67 19 71 97 78 19 72 111 95 24 38 82 117 116 29 91 134 1 54 108 162 8 37 57 121 174 192 37 143 191 238 41 66 1 4 5 75 5 64 96 5 71 108 7
HR Series ISO 20/1 Hydraulic Cylinders Seal kit Position Description 1 Wiper 2 Rod seal 3 Piston-rod guide ring 4 Piston-rod guide ring 5 Piston seal 6 O-ring 7 Anti-extrusion seal 8 O-ring 9 Anti-extrusion seal 10 O-ring 11 Anti-extrusion seal 12 Wiper (low friction) 13 Rod seal (LF) 14 Piston-rod guide band (LF) Piston seal (LF) 16 Piston-rod guide band (LF) 17 O-ring KHR *** *** * ISO 20/1 Serie Piston 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm = mm = mm 1 = 1 mm = mm 2 = 2 mm 0 = 0 mm Rod 014 = 14 mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm = mm 1 = 1 mm 0 = 0 mm 0 = 0 mm Seal type 0 = Standard, medium friction 1 = Low friction 2 = Low friction, high temperature 8
HR Series ISO 20/1 Hydraulic Cylinders Front rectangular flange mounting ISO MF1 Ø ØMM A B ØD ØDA E EE FB KK MF NV PJ R TF UF VD W Y ZB 14 16 M12x1, 12 16 35 1/4"G 6,6 M12x1, 12 77,7 69,2 85 3 16 58 5 M14x1,5 M14x1,5 67 42 3/8"G 9 M14x1,5 16 89 35,2 85 105 3 16 64 176 17 M16x1,5 M16x1,5 17 78 1/2"G 9 M16x1,5 16 97,6 98 1 3 16 71 198 M20x1,5 M20x1,5 95 1/2"G 11 M20x1,5 20 111 48,2 116,4 1 4 72 213 M27x2 M27x2 116 73 120 3/4"G 13,5 M27x2 117 55,5 134 1 4 20 82 234 M33x2 M33x2 85 1 95 135 3/4"G 17,5 M33x2 134,1 2,5 5 4 91 2 M42x2 M42x2 106 8 1 1 1"G M42x2 162 76,5 4,8 5 5 108 310 M48x2 M48x2 1 192 1 195 1"G M48x2 174,2 217,1 5 5 121 335 75 85 M64x3 9
HR Series ISO 20/1 Hydraulic Cylinders Rear rectangular flange mounting ISO MF2 Ø ØMM A ØB ØBA ØD ØDA E EE FB KK MF NV PJ R TF UF VE WF Y ZF 14 16 M12x1, 12 16 35 1/4"G 6,6 M12x1, 12 77,7 69,2 85 58 162 M14x1,5 M14x1,5 67 42 3/8"G 9 M14x1,5 16 89 35,2 85 105 19 64 6 17 M16x1,5 M16x1,5 17 78 1/2"G 9 M16x1,5 16 97,6 98 1 19 71 206 M20x1,5 M20x1,5 95 1/2"G 11 M20x1,5 20 111 48,2 116,4 1 24 38 72 5 M27x2 M27x2 116 73 120 3/4"G 13,5 M27x2 117 55,5 134 1 29 82 249 M33x2 M33x2 85 85 1 95 135 3/4"G 17,5 M33x2 134,1 2,5 5 54 91 2 M42x2 M42x2 106 106 8 1 1 1"G M42x2 162 76,5 4,8 5 37 57 108 3 M48x2 M48x2 1 1 192 1 195 1"G M48x2 174,2 217,1 5 37 121 357 75 85 M64x3 10
HR Series ISO 20/1 Hydraulic Cylinders Front round flange mounting ISO MF3 Ø ØMM A B ØD ØDA EE FB FC KK NF NV PJ UC VD WC Y ZB 14 16 M12x1, 12 16 35 1/4"G 6,6 75 M12x1, 12 77 3 16 58 5 M14x1,5 M14x1,5 67 42 3/8"G 9 92 M14x1,5 16 89 3 16 64 176 17 M16x1,5 M16x1,5 17 78 1/2"G 9 106 M16x1,5 16 97 3 16 71 198 M20x1,5 M20x1,5 95 1/2"G 11 126 M20x1,5 20 111 148 4 72 213 M27x2 M27x2 116 73 3/4"G 13,5 1 M27x2 117 1 4 20 82 234 M33x2 M33x2 85 1 95 3/4"G 17,5 165 M33x2 134 195 4 91 2 M42x2 M42x2 106 8 1 1"G M42x2 162 238 5 108 310 M48x2 M48x2 1 192 1 1"G 235 M48x2 174 272 5 121 335 75 85 M64x3 85 M64x3 75 1 85 1 2 5 1 1/4"G 0 M64x3 191 316 5 143 3 95 Mx3 95 Mx3 95 5 2 1 1/4"G 26 3 Mx3 4 385 5 35 1 474 1 120 112 Mx3 1 112 Mx3 120 2 112 2 5 298 1 1/2"G 33 420 Mx3 2 0 8 205 5 0 1 Mx4 0 Mx4 1 0 0 0 8 1 1/2"G 39 520 Mx4 358 620 8 2 696 0 1 M1x4 11
HR Series ISO 20/1 Hydraulic Cylinders Rear round flange mounting ISO MF4 Ø ØMM A B ØD ØDA EE FB FC KK NF NV PJ UC VE WF Y ZP 14 16 M12x1, 12 16 35 1/4"G 6,6 75 M12x1, 12 77 16 58 162 M14x1,5 M14x1,5 67 42 3/8"G 9 92 M14x1,5 16 89 19 16 64 6 17 M16x1,5 M16x1,5 17 78 1/2"G 9 106 M16x1,5 16 97 19 16 71 206 M20x1,5 M20x1,5 95 1/2"G 11 126 M20x1,5 20 111 148 24 72 5 M27x2 M27x2 116 73 3/4"G 13,5 1 M27x2 117 1 29 20 82 249 M33x2 M33x2 85 1 95 3/4"G 17,5 165 M33x2 134 195 91 2 M42x2 M42x2 106 8 1 1"G M42x2 162 238 37 108 3 M48x2 M48x2 1 192 1 1"G 235 M48x2 174 272 37 121 357 75 85 M64x3 85 M64x3 75 1 85 1 2 5 1 1/4"G 0 M64x3 191 316 41 143 6 95 Mx3 95 Mx3 95 5 2 1 1/4"G 26 3 Mx3 4 385 35 1 4 1 120 112 Mx3 1 112 Mx3 120 2 112 2 5 298 1 1/2"G 33 420 Mx3 2 0 64 205 6 0 1 Mx4 0 Mx4 1 0 0 0 8 1 1/2"G 39 520 Mx4 358 620 71 2 723 0 1 M1x4 12
HR Series ISO 20/1 Hydraulic Cylinders Eye mounting ISO MP3 Ø ØMM A B ØD ØDA EE CD EP KK L MR NV PJ VE WF Y XC 14 16 M12x1, 12 16 35 1/4"G 12 12 M12x1, 20 16 77 58 178 M14x1,5 M14x1,5 67 42 3/8"G 16 16 M14x1,5 20 89 19 64 206 17 M16x1,5 M16x1,5 17 78 1/2"G 20 20 M16x1,5 35 97 19 71 231 M20x1,5 M20x1,5 95 1/2"G M20x1,5 44 111 24 38 72 7 M27x2 M27x2 116 73 3/4"G M27x2 55 117 29 82 9 M33x2 M33x2 85 1 95 3/4"G M33x2 134 54 91 3 M42x2 M42x2 106 8 1 1"G M42x2 81 162 37 57 108 395 M48x2 M48x2 1 192 1 1"G M48x2 91 174 37 121 4 75 85 M64x3 85 M64x3 75 1 85 1 2 5 1 1/4"G M64x3 121 191 41 66 143 5 95 Mx3 95 Mx3 95 5 2 1 1/4"G Mx3 149 4 75 1 6 1 120 112 Mx3 1 112 Mx3 120 2 112 2 5 298 1 1/2"G Mx3 203 1 2 64 96 205 773 0 1 Mx4 0 Mx4 1 0 0 0 8 1 1/2"G 1 1 Mx4 242 358 71 108 2 9 0 1 M1x4 13
HR Series ISO 20/1 Hydraulic Cylinders Spherical eye mounting ISO MP5 Ø ØMM A CX B ØD ØDA EE EX EP KK LT MS NV PJ VE WF Y XO 14 16 M12x1, 12 16 12 35 1/4"G 12 10,6 M12x1, 20 16 77 58 178 M14x1,5 M14x1,5 16 67 42 3/8"G 16 14 M14x1,5 20 89 19 64 206 17 M16x1,5 M16x1,5 17 20 78 1/2"G 20 M16x1,5 35 97 19 71 231 M20x1,5 M20x1,5 95 1/2"G M20x1,5 44 111 24 38 72 7 M27x2 M27x2 116 73 3/4"G 27 M27x2 55 117 29 82 9 M33x2 M33x2 85 1 95 3/4"G 35 M33x2 134 54 91 3 M42x2 M42x2 106 8 1 1"G M42x2 81 162 37 57 108 395 M48x2 M48x2 1 192 1 1"G 52 M48x2 91 174 37 121 4 75 85 M64x3 85 M64x3 75 1 85 1 2 5 1 1/4"G 66 M64x3 121 191 41 66 143 5 95 Mx3 95 Mx3 95 5 2 1 1/4"G 84 Mx3 149 4 75 1 6 1 120 112 Mx3 1 112 Mx3 120 2 112 2 5 298 1 1/2"G 102 Mx3 203 1 2 64 96 205 773 0 1 Mx4 0 Mx4 1 0 1 0 0 8 1 1/2"G 1 1 Mx4 242 358 71 108 2 9 0 1 M1x4 14
HR Series ISO 20/1 Hydraulic Cylinders Foot mounting ISO MS2 Ø ØMM A ØB ØDA EE KK LH LS PJ S ØSB SS TS UH US XS Y 14 16 M12x1, 16 35 1/4"G M12x1, 77 20 9 142 83 92 58 58 M14x1,5 M14x1,5 42 3/8"G M14x1,5 38 67 89 11 1 75 99 64 M16x1,5 64 M16x1,5 1/2"G M16x1,5 43 78 97 11 3 1 120 71 M20x1,5 71 M20x1,5 1/2"G M20x1,5 52 95 111 14 199 105 1 1 72 M27x2 72 M27x2 73 3/4"G M27x2 62 116 117 211 120 1 0 82 M33x2 82 M33x2 85 95 3/4"G M33x2 1 134 2 135 199 210 91 M42x2 91 M42x2 106 1 1"G M42x2 82 8 162 26 293 1 2 2 108 M48x2 108 M48x2 1 1 1"G M48x2 192 174 33 1 195 295 0 121 85 M64x3 121 85 M64x3 1 85 1 5 1 1/4"G M64x3 119 238 191 33 4 2 1 3 143 95 Mx3 143 95 Mx3 95 2 1 1/4"G Mx3 1 5 4 72 39 447 295 5 4 1 1 112 Mx3 1
HR Series ISO 20/1 Hydraulic Cylinders Intermediate trunnion ISO MT4 Ø ØMM A B ØD ØDA BD EE KK NV PJ ØTD TL TM UM VE WF Y XV(mín) ZB 14 16 M12x1, 12 16 35 20 1/4"G M12x1, 77 12 10 83 58 107 135 M14x1,5 M14x1,5 67 42 3/8"G M14x1,5 89 16 75 12 99 19 64 120 3 17 M16x1,5 M16x1,5 17 78 1/2"G M16x1,5 97 20 16 1 19 71 135 148 M20x1,5 M20x1,5 95 35 1/2"G M20x1,5 111 105 20 1 24 38 72 1 3 M27x2 M27x2 116 73 3/4"G M27x2 117 120 1 29 82 165 199 M33x2 M33x2 85 1 95 3/4"G M33x2 134 135 199 54 91 178 5 M42x2 M42x2 106 8 1 1"G M42x2 162 1 2 37 57 108 2 2 M48x2 M48x2 1 192 1 75 1"G M48x2 174 195 295 37 121 2 295 75 85 M64x3 85 M64x3 75 1 85 1 2 5 1 1/4"G M64x3 191 2 1 41 66 143 0 334 95 Mx3 95 Mx3 95 5 2 1 1/4"G Mx3 4 295 5 75 1 3 414 1 120 112 Mx3 1 112 Mx3 120 2 112 2 5 298 135 1 1/2"G Mx3 2 3 5 64 96 205 395 495 0 1 Mx4 0 Mx4 1 0 0 0 8 175 1 1/2"G Mx4 358 1 4 720 71 108 2 495 8 0 1 M1x4 16
HT Series Cylinders with tie-rods / ISO 20/2-1 bar Technical characteristics Standard ISO 20/2 Construction type With tie-rods Rated pressure 1 bar Test pressure 2 bar Ambient temperature -20ºC +ºC -20ºC +1ºC with Viton seals Fluid temperature -20ºC +ºC -20ºC +1ºC with Viton seals Fluid Mineral oil - Other fluids on demand Piston (mm) 1 Rod (mm) 12 14 1 Maximum speed (m/s) standard seals 0,5 0,4 Maximum speed (m/s) low-friction seals 1 17
HT Series Cylinders with tie-rods / ISO 20/2-1 bar Codification Series ISO 20/2 Revision Piston Piston rod version A Small Rod B Big Rod C Big Rod w/strengthened thread Stroke Variations N No cushioning * A Front and rear cushion D Front cushion T Rear cushion B Double rod with cushion P Double rod without cushion HT A *** * **** * * * * * * * * Inductive sensor position N No detection * 1 2 3 4 Cushion screw position 0 No cushioning 1 2 3 4 * Air bleeds position 0 No air bleeds 1 2 * 3 4 Fixations 0 Basic design A ME5. Front square flange mounting B ME6. Rear square flange mounting C MP1. Clevis mounting D MP3. Eye mounting E MP5. Spherical eye mounting F MS2. Foot mounting G MT1. Front trunnion H MT2. Rear trunnion J MT4. Intermediate trunnion K MX1 Tie-rods extended head & cap L MX3 Tie-rods extended head end M MX2 Tie-rods extended cap end Port position 1 * 1 2 3 4 2 4 3 Piston rod material C C chromed S C with nickel-chrome K Stainless steel Sealing 0 Standard, medium friction * 1 Low friction 2 Low friction high temperature A spacer is installed for stokes higher than 0 mm Overall length of the cylinder increases this way: 1-10: +mm total length 11-0: +mm total length 1 20: +1mm total length 21 00: +mm total length *Default option
HT Series ISO 20/2 Hydraulic Cylinders Basic model Ø ØMM A B f8 Ø XX E EE G J KK PJ TG WH Y ZB ZJ 12 14 24 M10x1, 14 5 1/4"G M10x1, 54,3 121 M14x1,5 114 14 16 26 M12x1,5 16 5 1/4"G M12x1,5 57 33,2 137 34 M16x1,5 1 M14x1,5-3/8"G 55 38 M14x1,5 74 41,7 62 166 42 M20x1,5 3 34 M16x1,5-75 1/2"G 38 M16x1,5 76 52,3 26 68 176 M27x2 9 42 M20x1,5-1/2"G 38 M20x1,5 64,3 33 71 5 M33x2 168 M27x2-1 3/4"G M27x2 93 82,7 31 77 212 72 M42x2 1 M33x2-1 3/4"G 72 M33x2 101 96,9 35 82 5 88 M48x2 203 72 M42x2-165 1"G 58 M42x2 117,9 35 86 2 108 85 M64x3 2 88 M48x2 1-205 1"G 83 58 M48x2 1 4,9 86 279 133 95 Mx3 2 85 108 M64x3 85-2 1 1/4"G 101 76 M64x3 165 1,2 98 3 1 1 112 Mx3 299 19
HT Series ISO 20/2 Hydraulic Cylinders Seal kit Position Description 1 Wiper 2 Rod seal 3 Piston-rod guide ring 4 Piston seal 5 O-ring 6 Anti-extrusion seal 7 O-ring 8 Anti-extrusion seal 9 O-ring 10 Anti-extrusion seal 11 Wiper (low friction) 12 Rod seal (LF) 13 Piston-rod guide band (LF) 14 O-ring Piston ring (LF) 16 Piston-rod guide band (LF) ISO 20/2 Serie KHT *** *** * Piston Rod 0 = mm 014 = 14 mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm = mm 0 = mm = mm 0 = mm 1 = 1 mm 0 = mm = mm = mm 1 = 1 mm Seal type 0 = Standard, medium friction 1 = Low friction 2 = Low friction, high temperature 20
HT Series ISO 20/2 Hydraulic Cylinders Front rectangular flange mounting ISO ME5 Ø ØMM A B E EE F FB GF H J KK NV PJ R RD TO UO VD VE WF Y ZB ZJ 12 14 24 M10x1, 10 14 1/4"G 10 5,5 M10x1, 53 27 38 51 65 6 16 121 114 M14x1,5 14 16 26 M12x1,5 12 16 1/4"G 10 6,6 M12x1,5 33 42 58 12 35 1 1 34 M16x1,5 M14x1,5 3/8"G 10 11 38 38 M14x1,5 73 41 62 87 12 35 62 1 3 42 M20x1,5 34 M16x1,5 75 1/2"G 16 14 38 38 M16x1,5 74 52 74 105 1 9 41 67 173 9 M27x2 42 M20x1,5 75 1/2"G 16 14 38 38 M20x1,5 65 117 1 13 29 48 71 2 168 88 M33x2 M27x2 82 1 3/4"G 20 M27x2 93 83 149 0 9 29 51 77 209 1 72 105 M42x2 M33x2 92 1 3/4"G M33x2 101 97 162 10 57 82 2 203 88 M48x2 72 M42x2 105 165 1"G 58 58 M42x2 117 126 208 2 10 57 86 7 2 108 1 85 M64x3 88 M48x2 1 205 1"G 26 58 58 M48x2 1 5 3 0 7 57 86 277 2 133 1 95 Mx3 85 108 M64x3 1 85 2 1 1/4"G 33 76 76 M64x3 165 1 0 0 7 57 98 334 299 1 1 120 210 112 Mx3 21
HT Series ISO 20/2 Hydraulic Cylinders Rear rectangular flange mounting ISO ME6 Ø ØMM A B E EE FB GA H J KK NV PJ R TO UO VD WH Y ZJ 12 14 24 M10x1, 10 14 1/4"G 5,5 M10x1, 53 27 51 65 6 114 M14x1,5 14 16 26 M12x1,5 12 16 1/4"G 6,6 M12x1,5 33 58 12 1 34 M16x1,5 M14x1,5 3/8"G 11 55 38 M14x1,5 73 41 87 12 62 3 42 M20x1,5 34 M16x1,5 75 1/2"G 14 61 38 M16x1,5 74 52 105 1 9 67 9 M27x2 42 M20x1,5 1/2"G 14 61 38 M20x1,5 65 117 1 13 71 168 M33x2 M27x2 1 3/4"G M27x2 93 83 149 0 9 31 77 1 72 M42x2 M33x2 1 3/4"G 72 M33x2 101 97 162 10 35 82 203 88 M48x2 72 M42x2 165 1"G 58 M42x2 117 126 208 2 10 35 86 2 108 85 M64x3 88 M48x2 1 205 1"G 26 83 58 M48x2 1 5 3 0 7 86 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 33 101 76 M64x3 165 1 0 0 7 98 299 1 1 120 112 Mx3
HT Series ISO 20/2 Hydraulic Cylinders Clevis mounting ISO MP1 Ø ØMM A B CB CD CW E EE GA H J KK L MR NV PJ VD WH XC Y ZJ 12 14 24 M10x1, 10 14 12 10 6 1/4"G M10x1, 13 12 53 6 127 114 M14x1,5 14 16 26 M12x1,5 12 16 16 12 8 1/4"G M12x1,5 19 17 12 147 1 34 M16x1,5 M14x1,5 20 14 10 3/8"G 55 38 M14x1,5 19 17 73 12 172 62 3 42 M20x1,5 34 M16x1,5 20 75 1/2"G 61 38 M16x1,5 29 74 9 191 67 9 M27x2 42 M20x1,5 20 1/2"G 61 38 M20x1,5 29 13 71 168 M33x2 M27x2 20 1 3/4"G M27x2 39 34 93 9 31 9 77 1 72 M42x2 M33x2 1 3/4"G 72 M33x2 54 44 101 10 35 7 82 203 88 M48x2 72 M42x2 165 1"G 58 M42x2 57 53 117 10 35 9 86 2 108 85 M64x3 88 M48x2 1 35 205 1"G 83 58 M48x2 59 1 7 8 86 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 101 76 M64x3 82 78 165 7 381 98 299 1 1 120 112 Mx3 23
HT Series ISO 20/2 Hydraulic Cylinders Eye mounting ISO MP3 Ø ØMM A B CD E EE EW GA H J KK L MS NV PJ VD WH XC Y ZJ 12 14 24 M10x1, 10 14 10 1/4"G 12 M10x1, 13 12 53 6 127 114 M14x1,5 14 16 26 M12x1,5 12 16 12 1/4"G 16 M12x1,5 19 17 12 147 1 34 M16x1,5 M14x1,5 14 3/8"G 20 55 38 M14x1,5 19 17 73 12 172 62 3 42 M20x1,5 34 M16x1,5 20 75 1/2"G 61 38 M16x1,5 29 74 9 191 67 9 M27x2 42 M20x1,5 20 1/2"G 61 38 M20x1,5 29 13 71 168 M33x2 M27x2 1 3/4"G M27x2 39 34 93 9 31 9 77 1 72 M42x2 M33x2 1 3/4"G 72 M33x2 54 44 101 10 35 7 82 203 88 M48x2 72 M42x2 165 1"G 58 M42x2 57 53 117 10 35 9 86 2 108 85 M64x3 88 M48x2 1 205 1"G 83 58 M48x2 59 1 7 8 86 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 101 76 M64x3 82 78 165 7 381 98 299 1 1 120 112 Mx3 24
HT Series ISO 20/2 Hydraulic Cylinders Spherical eye mounting ISO MP5 ZJ + Y PJ E A WH VD EE DIN 71412 H E Z Z ØB ØMM KK ØCX MS EP EX NV GA XO + J LT Ø ØMM A B CX E EE EP EX GA H J KK LT MS NV PJ VD WH XO Y Z ZJ 12 14 24 M10x1, 10 14 12 1/4"G 8 10 M10x1, 16 20 53 6 1 4 114 M14x1,5 14 16 26 M12x1,5 12 16 16 1/4"G 11 14 M12x1,5 20,5 12 148 4 1 34 M16x1,5 M14x1,5 20 3/8"G 13 16 55 38 M14x1,5 29 73 12 178 62 4 3 42 M20x1,5 34 M16x1,5 75 1/2"G 17 20 61 38 M16x1,5 31 33 74 9 1 67 4 9 M27x2 42 M20x1,5 1/2"G 19 61 38 M20x1,5 38 13 206 71 4 168 M33x2 M27x2 1 3/4"G 23 M27x2 48 93 9 31 238 77 4 1 72 M42x2 M33x2 1 3/4"G 35 72 M33x2 58 62 101 10 35 261 82 4 203 88 M48x2 72 M42x2 165 1"G 38 44 58 M42x2 72 117 10 35 4 86 4 2 108 85 M64x3 88 M48x2 1 205 1"G 47 55 83 58 M48x2 92 1 7 337 86 4 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 57 101 76 M64x3 116 120 165 7 4 98 4 299 1 1 120 112 Mx3
HT Series ISO 20/2 Hydraulic Cylinders Foot mounting ISO MS2 Ø ØMM A B E EE GA H J KK LH NV PJ SB SS ST TS US VD WH XS Y ZB ZJ 12 14 24 M10x1, 10 14 1/4"G M10x1, 19 53 6,6 73 8,5 54 72 6 33 121 114 M14x1,5 14 16 26 M12x1,5 12 16 1/4"G M12x1,5 9 73 12,5 84 12 1 1 34 M16x1,5 M14x1,5 3/8"G 55 38 M14x1,5 31 73 11 98 12,5 83 103 12 62 1 3 42 M20x1,5 34 M16x1,5 75 1/2"G 61 38 M16x1,5 37 74 14 92 19 102 127 9 54 67 173 9 M27x2 42 M20x1,5 1/2"G 61 38 M20x1,5 44 86 26 124 161 13 65 71 2 168 M33x2 M27x2 1 3/4"G M27x2 57 93 105 26 149 6 9 31 68 77 209 1 72 M42x2 M33x2 1 3/4"G 72 M33x2 101 26 102 172 216 10 35 79 82 2 203 88 M48x2 72 M42x2 165 1"G 58 M42x2 82 117 26 131 210 4 10 35 79 86 7 2 108 85 M64x3 88 M48x2 1 205 1"G 83 58 M48x2 101 1 33 1 38 2 3 7 86 86 277 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 101 76 M64x3 1 165 39 172 44 311 381 7 92 98 334 299 1 1 120 112 Mx3 26
HT Series ISO 20/2 Hydraulic Cylinders Front trunnion ISO MT1 Ø ØMM A B E EE GA H J KK NV PJ TC TD TL UT VD WH XG Y ZB ZJ 12 14 24 M10x1, 10 14 1/4"G M10x1, 53 38 12 10 58 6 44 121 114 M14x1,5 14 16 26 M12x1,5 12 16 1/4"G M12x1,5 44 16 12 68 12 54 1 1 34 M16x1,5 M14x1,5 3/8"G 55 38 M14x1,5 73 20 16 95 12 57 62 1 3 42 M20x1,5 34 M16x1,5 75 1/2"G 61 38 M16x1,5 74 76 20 116 9 64 67 173 9 M27x2 42 M20x1,5 1/2"G 61 38 M20x1,5 89 139 13 71 2 168 M33x2 M27x2 1 3/4"G M27x2 93 114 178 9 31 76 77 209 1 72 M42x2 M33x2 1 3/4"G 72 M33x2 101 127 207 10 35 71 82 2 203 88 M48x2 72 M42x2 165 1"G 58 M42x2 117 165 265 10 35 75 86 7 2 108 85 M64x3 88 M48x2 1 205 1"G 83 58 M48x2 1 203 9 7 75 86 277 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 101 76 M64x3 165 241 1 7 85 98 334 299 1 1 120 112 Mx3 27
HT Series ISO 20/2 Hydraulic Cylinders Rear trunnion ISO MT2 Ø ØMM A B E EE GA H J KK NV PJ TC TD TL UT VD WH XJ Y ZB ZJ 12 14 24 M10x1, 10 14 1/4"G M10x1, 53 38 12 10 58 6 101 121 114 M14x1,5 14 16 26 M12x1,5 12 16 1/4"G M12x1,5 44 16 12 68 12 1 1 1 34 M16x1,5 M14x1,5 3/8"G 55 38 M14x1,5 73 20 16 95 12 134 62 1 3 42 M20x1,5 34 M16x1,5 75 1/2"G 61 38 M16x1,5 74 76 20 116 9 1 67 173 9 M27x2 42 M20x1,5 1/2"G 61 38 M20x1,5 89 139 13 149 71 2 168 M33x2 M27x2 1 3/4"G M27x2 93 114 178 9 31 168 77 209 1 72 M42x2 M33x2 1 3/4"G 72 M33x2 101 127 207 10 35 7 82 2 203 88 M48x2 72 M42x2 165 1"G 58 M42x2 117 165 265 10 35 209 86 7 2 108 85 M64x3 88 M48x2 1 205 1"G 83 58 M48x2 1 203 9 7 2 86 277 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 101 76 M64x3 165 241 1 7 276 98 334 299 1 1 120 112 Mx3
HT Series ISO 20/2 Hydraulic Cylinders Intermediate trunnion ISO MT4 Ø ØMM A B BD E EE GA H J KK NV PJ TD TL TM UM UW VD WH XV(mín) Y ZB ZJ 12 14 24 M10x1, 10 14 20 1/4"G M10x1, 53 12 10 48 68 6 77 121 114 M14x1,5 14 16 26 M12x1,5 12 16 1/4"G M12x1,5 16 12 55 79 12 1 1 34 M16x1,5 M14x1,5 3/8"G 55 38 M14x1,5 73 20 16 76 108 12 97 62 1 3 42 M20x1,5 34 M16x1,5 75 1/2"G 61 38 M16x1,5 74 20 89 129 83 9 108 67 173 9 M27x2 42 M20x1,5 48 1/2"G 61 38 M20x1,5 1 94 13 119 71 2 168 M33x2 M27x2 55 1 3/4"G M27x2 93 127 191 1 9 31 131 77 209 1 72 M42x2 M33x2 65 1 3/4"G 72 M33x2 101 1 0 1 10 35 142 82 2 203 88 M48x2 72 M42x2 85 165 1"G 58 M42x2 117 178 278 168 10 35 1 86 7 2 108 85 M64x3 88 M48x2 1 105 205 1"G 83 58 M48x2 1 2 341 205 7 1 86 277 2 133 95 Mx3 85 108 M64x3 85 2 1 1/4"G 101 76 M64x3 165 279 439 2 7 198 98 334 299 1 1 120 112 Mx3 29
HT Series ISO 20/2 Hydraulic Cylinders Tie-rods extended head and cap ISO MX1 Ø ØMM A B BB DD E EE GA H J KK NV PJ TG VD WH Y ZJ 12 14 24 M10x1, 10 14 19 M5x0,8 1/4"G M10x1, 53,3 6 114 M14x1,5 14 16 26 M12x1,5 12 16 24 M6x1 1/4"G M12x1,5 33,2 12 1 34 M16x1,5 M14x1,5 35 M8x1 3/8"G 55 38 M14x1,5 73 41,7 12 62 3 42 M20x1,5 34 M16x1,5 M12x1, 75 1/2"G 61 38 M16x1,5 74 52,3 9 67 9 M27x2 42 M20x1,5 M12x1, 1/2"G 61 38 M20x1,5 64,3 13 71 168 M33x2 M27x2 59 M16x1,5 1 3/4"G M27x2 93 82,7 9 31 77 1 72 M42x2 M33x2 59 M16x1,5 1 3/4"G 72 M33x2 101 96,9 10 35 82 203 88 M48x2 72 M42x2 81 Mx1,5 165 1"G 58 M42x2 117,9 10 35 86 2 108 85 M64x3 88 M48x2 1 92 M27x2 205 1"G 83 58 M48x2 1 4,9 7 86 2 133 95 Mx3 85 108 M64x3 85 1 Mx2 2 1 1/4"G 101 76 M64x3 165 1,2 7 98 299 1 1 120 112 Mx3
HT Series ISO 20/2 Hydraulic Cylinders Tie-rods extended cap end ISO MX2 Ø ØMM A B BB DD E EE GA H J KK NV PJ TG VD WH Y ZJ 12 14 24 M10x1, 10 14 19 M5x0,8 1/4"G M10x1, 53,3 6 114 M14x1,5 14 16 26 M12x1,5 12 16 24 M6x1 1/4"G M12x1,5 33,2 12 1 34 M16x1,5 M14x1,5 35 M8x1 3/8"G 55 38 M14x1,5 73 41,7 12 62 3 42 M20x1,5 34 M16x1,5 M12x1, 75 1/2"G 61 38 M16x1,5 74 52,3 9 67 9 M27x2 42 M20x1,5 M12x1, 1/2"G 61 38 M20x1,5 64,3 13 71 168 M33x2 M27x2 59 M16x1,5 1 3/4"G M27x2 93 82,7 9 31 77 1 72 M42x2 M33x2 59 M16x1,5 1 3/4"G 72 M33x2 101 96,9 10 35 82 203 88 M48x2 72 M42x2 81 Mx1,5 165 1"G 58 M42x2 117,9 10 35 86 2 108 85 M64x3 88 M48x2 1 92 M27x2 205 1"G 83 58 M48x2 1 4,9 7 86 2 133 95 Mx3 85 108 M64x3 85 1 Mx2 2 1 1/4"G 101 76 M64x3 165 1,2 7 98 299 1 1 120 112 Mx3 31
HT Series ISO 20/2 Hydraulic Cylinders Tie-rods extended head end ISO MX3 Ø ØMM A B BB DD E EE GA H J KK NV PJ TG VD WH Y ZJ 12 14 24 M10x1, 10 14 19 M5x0,8 1/4"G M10x1, 53,3 6 114 M14x1,5 14 16 26 M12x1,5 12 16 24 M6x1 1/4"G M12x1,5 33,2 12 1 34 M16x1,5 M14x1,5 35 M8x1 3/8"G 55 38 M14x1,5 73 41,7 12 62 3 42 M20x1,5 34 M16x1,5 M12x1, 75 1/2"G 61 38 M16x1,5 74 52,3 9 67 9 M27x2 42 M20x1,5 M12x1, 1/2"G 61 38 M20x1,5 64,3 13 71 168 M33x2 M27x2 59 M16x1,5 1 3/4"G M27x2 93 82,7 9 31 77 1 72 M42x2 M33x2 59 M16x1,5 1 3/4"G 72 M33x2 101 96,9 10 35 82 203 88 M48x2 72 M42x2 81 Mx1,5 165 1"G 58 M42x2 117,9 10 35 86 2 108 85 M64x3 88 M48x2 1 92 M27x2 205 1"G 83 58 M48x2 1 4,9 7 86 2 133 95 Mx3 85 108 M64x3 85 1 Mx2 2 1 1/4"G 101 76 M64x3 165 1,2 7 98 299 1 1 120 112 Mx3
HV Series ISO 30 Hydraulic Cylinders Technical characteristics Standard ISO 30 Rated pressure Test pressure 1 bar 2 bar Ambient temperature -20ºC +ºC -20ºC Fluid temperature -20ºC +ºC Fluid -20ºC +1ºC with Viton seals +1ºC with Viton seals Mineral oil - Other fluids to order Piston (mm) 1 2 Rod (mm) 20 1 1 0 Maximum speed (m/s) - standard seals Maximum speed (m/s) - low-friction seals 0,5 0,4 1 33
HV Series ISO 30 Hydraulic Cylinders Codification Series ISO 30 Revision HV A *** * **** * * * * * Piston Piston rod version A Small Rod B Big Rod Stroke Variations S Single rod D Double rod Fixations A Front round flange mounting B Rear round flange mounting C Eye mounting D Spherical eye mounting E Intermediate trunnion F Foot mounting Rear port position 1 * 1 2 3 4 2 4 3 Front port position 1 * 1 2 3 4 2 4 3 Sealing 0 Standard, medium friction * 1 Low friction 2 Low friction, high temperature A spacer is installed for stokes higher than 0 mm Overall length of the cylinder increases this way: 1-10: +mm total length 11-0: +mm total length 1 20: +1mm total length 21 00: +mm total length *Default option 34
HV Series ISO 30 Hydraulic Cylinders Seal kit Position Description 1 Wiper 2 Rod seal 3 Piston-rod guide ring 4 Piston-rod guide band 5 Piston seal 6 O-ring 7 Anti-extrusion seal 8 O-ring 9 Anti-extrusion seal 10 Wiper (low friction) 11 Rod seal (LF) 12 Piston-rod guide band (LF) 13 Piston seal (LF) 14 Piston-rod guide band (LF) ISO30 Serie KHV *** *** * Piston Rod 0 = mm 020 = 20 mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm 0 = mm = mm 0 = mm = mm 0 = mm 1 = 1 mm 0 = mm = mm = mm 2 = 2 mm 1 = 1 mm 0 = 0 mm Seal type 0 = Standard, medium friction 1 = Low friction 2 = Low friction, high temperature 35
HV Series ISO 30 Hydraulic Cylinders Front Round Flange Ø ØA E B D F G H I J K L M N 20 107 52 M14 x 1,5 2 35 67 7 42 1/4"G 97 M16 x 1,5 2 82 9 3/8"G 104 75 M20 x 1,5 2 48 103 11 3/8"G 106 M27 x 2 20 2 58 120 1 13 75 3/8"G 126 M33 x 2 2 68 142 1 95 3/8"G 138 135 M42 x 2 3 85 1 202 17 1 1/2"G 210 1 M48 x 2 3 92 210 2 21 1 3/4"G 1 238 2 M x 3 54 3 95 1 2 0 29 5 1"G 1 278 2 M x 3 65 3 95 1 3 385 2 1 1/4 G 2 1 0 338 3 M x 3 65 5 1 3 4 29 298 1 1/4"G Rear Round Flange Ø ØA E B D F G H I J K L M N 20 52 M14 x 1,5 2 35 67 7 42 1/4"G 1 M16 x 1,5 2 82 9 3/8"G 139 75 M20 x 1,5 2 48 103 11 3/8"G 149 M27 x 2 20 2 58 120 1 13 75 3/8"G 171 M33 x 2 2 68 142 1 95 3/8"G 5 135 M42 x 2 3 85 1 202 17 1 1/2"G 2 1 M48 x 2 3 92 210 2 21 1 3/4"G 1 8 2 M x 3 54 3 95 1 2 0 29 5 1"G 1 3 2 M x 3 65 3 95 1 3 385 2 1 1/4 G 2 1 0 8 3 M x 3 65 5 1 3 4 29 298 1 1/4"G
HV Series ISO 30 Hydraulic Cylinders Spherical eye mounting Ø ØA E D F G H I J L M N 20 1 M14 x 1,5,8 16 35 38 20 42 1/4"G 142 M16 x 1,5 27,5 20 3/8"G 7 M20 x 1,5,5 48 51 29 3/8"G 167 M27 x 2 41,5 58 61 35 75 3/8"G 195 M33 x 2 68 69 95 3/8"G 6 M42 x 2 61,5 35 85 88 1 1/2"G 310 M48 x 2 71 44 92 99 1 3/4"G 1 379 M x 3 55 95 1 141 5 1"G 1 433 M x 3 1 95 1 5 2 1 1/4 G 2 1 0 8 M x 3 147,5 1 165 298 1 1/4"G Eye mounting Ø ØA E D F G H I J K L M N 20 127 M14 x 1,5 13 16 35 20 26 12 42 1/4"G 1 M16 x 1,5 16 20 16 3/8"G 1 M20 x 1,5 20 48 20 3/8"G 138 M27 x 2 58 75 3/8"G 171 M33 x 2 68 64 95 3/8"G 193 M42 x 2 85 55 1 1/2"G 275 M48 x 2 92 65 1 3/4"G 1 313 M x 3 95 1 75 126 5 1"G 1 373 M x 3 95 1 95 1 2 1 1/4 G 2 1 0 8 M x 3 120 1 1 298 1 1/4"G 37
HV Series ISO 30 Hydraulic Cylinders Intermediate trunnion (minimum) (minimum) Ø ØA E E1 E2 D F G H I J K L M N 20 107 65 58 M14 x 1,5 20 35 12 16 42 1/4"G 97 74 64 M16 x 1,5 24 16 102 20 3/8"G 104 69 M20 x 1,5 85 48 20 3/8"G 106 84 M27 x 2 105 58 5 75 3/8"G 126 95 75 M33 x 2 68 175 95 3/8"G 138 106 82 M42 x 2 1 85 0 1 1/2"G 210 1 1 M48 x 2 55 1 92 2 1 3/4"G 1 238 175 1 M x 3 2 95 1 3 5 1"G 1 278 1 1 M x 3 0 95 1 426 2 1 1/4 G 2 1 0 338 7 210 M x 3 3 1 520 298 1 1/4"G Foot mounting Ø ØA E B D H I J K L M N O S 20 107 M14 x 1,5 35 75 95 16 42 1/4"G 20 11 97 35 M16 x 1,5 94 1 20 3/8"G 13 104 M20 x 1,5 48 105 1 20 3/8"G 106 M27 x 2 58 1 1 75 3/8"G 17 126 62 M33 x 2 68 1 195 95 3/8"G 19 138 73 M42 x 2 85 5 5 1 1/2"G 23 210 88 M48 x 2 92 0 265 35 1 3/4"G 1 238 M x 3 95 1 295 355 5 1"G 35 1 278 1 M x 3 95 1 355 4 2 1 1/4 G 41 2 1 0 338 1 M x 3 1 4 510 65 298 1 1/4"G 78 47 38
Accessories Hydraulic Cylinders Swivel head ISO 8133 Valid for series HR, HT and HV Piston rod KK (metric) EN EU CE Ø -0-0,008 EF máx. N máx. DX CF js13 AK AX mín. P/N 14 M12x1, 14-0 11 16-0 -0,12-0,008 21 21 48 69 17 HRT014AH M14x1,5 16-0 13 20-0 -0,12-0,010 55 58 83 19 HRT0AH M16x1,5 20-0 17-0 -0,12-0,010 31 62 68 99 23 HRT0AH M20x1,5-0 19-0 -0,12-0,010 38 85 123 29 HRT0AH M27x2-0 23-0 -0,12-0,012 48 105 3 37 HRT0AH M33x2 35-0 -0-0, -0,012 58 55 105 1 8 HRT0AH M42x2 44-0 38-0 -0, -0,0 75 68 134 1 5 57 HRT0AH M48x2 55-0 47-0 -0, -0,0 97,5 78 1 5 2,2 64 HRT0AH M64x3-0 57-0 -0,20-0,020 117,5 1 2 357,5 86 HRT0AH Rod flange ISO 81 Valid for series HR, HT and HV Piston KK B1 B2 C K R x Nº R2 rod (metric) Ø Ø Ø Q.ty P/N 14 M12x1, 17 6,8 6,6 4 11 HRT014AA M14x1,5 19 9 9 4 14,5 HRT0AA M16x1,5 23 9 72 54 9 6 14,5 HRT0AA M20x1,5 29 9 82 9 6 14,5 HRT0AA M27x2 37 11 78 11 6 17,5 HRT0AA M33x2 13 120 95 13,5 8 20 HRT0AA M42x2 57 17,5 1 120 17,5 8 26 HRT0AA M48x2 64 21,5 1 1 8 33 HRT0AA M64x3 86 2 0 26 8 HRT0AA 39
Accessories Hydraulic Cylinders Fork joint hinge with pin ISO 8133 Valid for series HR, HT and HV Piston KK CK f8 rod (metric) Ø CL máx. CM b12 CJ js13 LE mín. ER máx. CG P/N 14 M12x1, 12 16 19 17 21 HRT014AG M14x1,5 14 20 38 19 17 21 HRT0AG M16x1,5 20 54 29 HRT0AG M20x1,5 20 29 HRT0AG M27x2 75 39 34 HRT0AG M33x2 99 54 HRT0AG M42x2 120 113 57 53 HRT0AG M48x2 1 126 59 75 HRT0AG M64x3 1 168 83 78 95 HRT0AG Mx3 1 168 83 78 95 HRTAG 1 Mx3 2 2 95 1 HRT1AG Clevis bracket ISO 81 Valid for series HR, HT and HV CK H9 CM A16 CL h13 FL js14 LE FB Ø Ø TB js14 UH RC js14 UR MR P/N 12 12 34 9 20 12 HRT012AC 16 16 27 11 65 26 16 HRT016AC 20 20 11 75 98 58 20 HRT020AC 55 37 13,5 85 113 HRT0AC 65 43 17,5 143 85 HRT0AC 76 52 1 1 65 108 HRT0AC 95 65 26 1 0 1 HRT0AC 1 112 75 33 210 2 1 HRT0AC 1 1 95 39 2 0 210 HRT0AC
Accessories Hydraulic Cylinders Trunnion bracket ISO 81 Valid for series HR and HT Piston AX H13 Ø H A16 H1 H2 máx. TD H7 HJ E1 N N1 B4 N9 T +0,3 +0 P/N 9 34 49 12 17 8 10 3,3 HRT0AF 11 59 16 21 10 16 4,3 HRT0AF 11 38 69 20 21 10 16 4,3 HRT0AF 13,5 55 26 12 5,4 HRT0AF 17,5 65 52 1 33 5,4 HRT0AF 76 120 1 41 16 8,4 HRT0AF 26 95 75 1 210 51 1 20 8,4 HRTAF 33 112 85 177 265 61 11,4 HRTAF 1 39 1 112 0 3 81 2 31 11,4 HRT1AF 41
Special Hydraulic Cylinders Cylinders designed or manufactured from drawings. Custom measurements, functions, materials and accessories. Typical applications: offshore, transhipment and material handling in ports, infrastructure, presses, steel, lifting, trailers. Our team of professionals can design and manufacture the cylinders that best suit our customers needs. 42
We are a partner of internationally renowned companies Pneumatic valves, safety valves, proportional valves, filters, regulators, lubricators (FRLs)... Deceleration and vibration technology Vane air motors, compact motors, pneumatic brakes... Linear diaphragm and piston pumps and diaphragm compressors Pneumatic and hydraulic cylinders, pannels, cabinets and other assemblies Piston air motors Miniature diaphragm pumps for gases and liquids and peristaltic pumps Compressed air treatment solutions Pumps for corrosive and hazardous liquids FURTHER INFORMATION AT... WWW.AIRCONTROL.ES WWW.AIRCONTROL-METALS.COM
HEADQUARTER DONOSTIA-SAN SEBASTIÁN Paseo Sarroeta, 4 E-14 Donostia-San Sebastián Tel.: (+34) 943 44 Fax: (+34) 943 44 51 53 E-mail: info@aircontrol.es BRANCHES BILBAO Tel.: (+34) 943 44 Fax: (+34) 943 44 51 53 E-mail: info@aircontrol.es MADRID Tel.: (+34) 943 44 Fax: (+34) 943 44 51 53 E-mail: info@aircontrol.es BARCELONA Ramón Albó 71-73 E-027 Barcelona Tel.: (+34) 93 498 81 Fax: (+34) 93 8 41 08 E-mail: info@aircontrol.es SEVILLA REINSUR S.L. Avda. Alcalde Luis Uruñuela s/n Edificio Congreso, Mod. 421 E-41020 Sevilla Tel.: (+34) 95 4 85 17 Fax: (+34) 95 4 85 17 E-mail: reinsur_sl@yahoo.es LISBOA (PORTUGAL) Alameda Fernão Lopes 31 A, Torre 2 - Miraflores P-1495-1 Algés (Lisboa) Tel.: (+351) 21 410 13 57 Fax: (+351) 21 410 08 E-mail: geral@air-control.pt Distributed by: AC-CCH-17-EN