Reference Description Qty 10 17153 Машина сигарного типа SVM 1 + 6/560 mm 1 13 17082 Высокосоростная машина двойной скрутки для стали SKET, Модель MSDN 250 13 17083 Высокосоростная машина двойной скрутки для стали SKET, Модель MSDN 400 13 17084 Высокосоростная машина двойной скрутки для стали SKET, Модель MSDN 400 13 17085 Высокосоростная машина двойной скрутки для стали SKET, Модель MSDN 250 13 17086 Высокосоростная машина двойной скрутки для стали SKET, Модель MSDN 250 1 1 1 1 1 30 17155 Экструдер Maillefer 150 мм ПВХ/ПЭ 18 D, Модель BM 1 30 17087 Тандемная линия изолирования NIEHOFF-ROSENDAHL, Модель RT-A 1 31 17187 Экструзионная головка MAILLEFER, Модель 35/45 1 31 17161 ZUMBACH 25 kv Спарктестер, Модель 25 1 41 17185 Автоматический сдвоенный приемник MAILLEFER 1250 mm, Model KA II 1 42 17089 Консольный приемник 2250 мм 1 42 17154 Портальный тормозной отдатчик MAILLEFER 2200 мм, Модель JD 22 2 45 17156 Ременная тяга Maillefer 480 кг, 1200 мм, Модель QR 1
47 17157 Система локализации отказов TETR модель PT 30-10 MK2 1 47 17158 Clinton Система локализации отказов, Модель FL 111B 1 47 17159 BAUR Тестер на разрыв, Модель ATG 6000 1 47 17160 FONTIJNE Гидравлический ремонтный пресс, Модель TP 600 1 47 17180 HERAEUS 250 C Лабораторная печь 3 47 17181 MEMMERT 250 Лаборатороная печь 3 47 17182 Печь горения безгалогенных материалов 1 50 17162 TRUMETER Счетчик метража колесного типа 1 50 17179 LIFTRITE Напольный электроштабелер 1 50 17183 FILTER BOX талькатор 1 50 17186 Запчасти и шкафы 1 50 17188 REDEX Эпицикличные и разные редуктора, Model H50.4 4 63 17146 Двухпроволочная машина среднего волочения HENRIC, Model 2 G-17-02-24. 1 86 17177 BWE Установка холодной сварки Model CW 2 E 1 86 17184 Керамические трубки для стойки сварочника 1 89 17147 Лиг\ния эмалирования MAG 0,04-0,10 мм, Model HSU-1 3 89 17148 Линия эмалирования MAG 0,10-0,25 мм, Model HES-2 4 89 17149 Линия эмалирования MAG 0,20-0,50 мм, Model HES-4 2 89 17150 Линия эмалирования MAG 0,20-0,80 мм, Model HN4/HL 1
89 17151 Линия эмалирования MAG 0,15-0,45 мм, Model HZ 4 A 1 89 17152 Линия эмалирования MAG 0,08-0,25 мм, Model HN2B 1
1 X SVM Tubular Stranding Line 1 + 6/560 mm (our ref. 10 17153) Complete and well maintained tubular strander, perfectly suitable for stranding bare Copper, Aluminium, ACSR or steel wires. Can also be used for closing steel products or flexible copper bunches. Machine has been used in non-ferrous cable factory, with clean operation and good maintenance. Line is complete with : * External 560 mm shaft pay-off * Tube 6 bobbins 560 mm, underrollers * Die block, axilally adjustable * Capstan 2 x 850 mm with change gears and gear box * Leimbach Pneumatic dancer, Leimbach model HP05 * Leimbach 1600 mm portal type take-up, model CR16.01 * AC motor and 9 speed gear box * Inching motor for tube positioning * Electrical panel * Crane on mobile frame for loading the spools Number of bobbin in tube... Bobbin flange dia Overall width Bore diameter Bobbin holding Wire tension Wire guides Tube speed Gear box Tube support Tube brake Capstan Wheel dia. Grooves Lay change Line speed Take-Up Bobbin dimension Bobbin holding Traversing Lifting 6 560 mm 350 mm 127 mm Shaft Shoe brake system inside tube 93 up to 700 RPM 9 steps Underrollers Pneumatic shoe Double wheel 850 mm 6+6 U shape Change gears 32 m/min Portal type 1600 mm DIN Between pintles Self traversing on floor Screws/motors
Drive Electrical panel Year Direction... IncludedDC motor 1985 Left to right
1 X SKET High Speed Double Twist Line for Steel, Model MSDN 250 (our ref. 13 17082) Complete high speed production line for steel wire stranding, wires ranging from 0,125-0,25 mm with max. strand dia. of 1,2 mm, wound on 250 mm bobbins. The line is composed of : * Bactwist Pay-off for 1 bobbin 220 mm * Pay-off frame for 20 bobbins 160/200 mm, unrolling type * Central wire braking capstan 100 mm * Guiding system for external wires * Lay-plate 1+6+12, with die holder * 2 x External twisters, 2+2/35 mm * 250 mm high speed double twist unit * Electrical panel * Control cubicle with counter & speed control Machine is equipped with pre-twister, post twister and post-forming device for getting perfect quality control. The rollers (35 mm) inside the machine can be inclined up to 10 degree for helping the wire twist. Unloading of bobbin is achieved by pneumatic table. Electronic drive & control panel includes required components. Take-up bobbin dia.... Overall width Pintle operation Bobbin unloading Wire diameter Wire tensile strength Max dia.finished product Speed Pretwister Overtwister Post-straightener Capstan diameter Passages Pulling force Laylength setting Lay range 1 Lay range 2 Lay range 3 Lay range 4 Bobbin drive 250 mm 160 mm Between pintles Pneumatic swivelling table 0,125 to 0,25 mm 160-220 kg/mm² 1,2 mm 6.000 tw/min 2 x 35 mm, outside machine 2 x 50 mm, inside machine 20+20 / 10 mm 70-78-93-106 mm 12+12 1200 N Change gears 3,6..8,6 mm (70 mm capstan) 4,0..9,6 mm (78 mm capstan) 4,8..11,4 mm (93 mm capstan) 5,5..13,0 mm (106 mm capstan) Through clutch
Power Electronic PLC Stop time Number of pay-offs Pay-off type Pay-off diameter Unrolling system Backtwist Pay-off OW. Pay-off system Back tension control Overall length Max width Weight Year Direction DC motor 18 kw Reta drive Siemens 6 to 8 sec. 1 + 20 units 1 Backtwist 20 Unrolling system 160 mm 220 mm 128 mm (180 mm) Shaft Shoe brake + dancer 9,5 m 1,2 m 5,0 Tons 1990 Left to right Left to right
1 X SKET High Speed Double Twist Line for Steel, Model MSDN-400 (our ref. 13 17083) Complete high speed production line for steel wire stranding, wires ranging from 0,15-0,60 mm for max. strand dia. of 1,8 mm The line is composed of : * Guiding system & die holder * External twister 4 x 60 mm * 400 mm heavy duty double twist unit * Electrical panel Machine is equipped with pre-twister, post twister and post-forming device. Loading is achieved by electrical table. Take-up bobbin dia.... Bore Bobbin position Pintle operation Bobbin loading Wire diameter Wire tensile strength Max dia.finished product Speed Pretwister Overtwister Post-straightener Capstan diameter Passages Pulling force Lay range 1 Lay range 2 Lay range 3 Bobbin drive Winding tension control Power Electronic Overall length Max width 400 mm 56 mm Between pintles Pneumatic Electrical swivelling table 0,15-0,60 mm 160-270 kg/mm² 1,8 mm 4.000 tw/min 4 x 60 mm, outside machine 4 x 60 mm, inside machine 20+20 / 10 mm 106 or 90 or 73 mm 10+11 900 N 2,6..11,3 mm (73 mm capstan) 3,2..13,9 mm (90 mm capstan) 3,7..16,4 mm (106 mm capstan) Electromagentic clutch Permanent magnet DC motor 17 KW Reta drive 6,6 m 1,25m
Weight Year Direction 4,77 Tons 1990 Left to right
1 X SKET High Speed Double Twist Line for Steel, Model MSDN400 (our ref. 13 17084) Complete high speed production line for steel wire stranding, wires ranging from 0,15-0,60 mm for max. strand dia. of 1,8 mm The line is composed of : * 8 pay offs, 250mm, unrolling system * Guiding system & die holder * External twister 4 x 60 mm * 400 mm heavy duty double twist unit * Electrical panel Machine is equipped with pre-twister, post twister and post-forming device. Loading is achieved by electrical table. Take-up bobbin dia.... Bore Bobbin position Pintle operation Bobbin loading Wire diameter Wire tensile strength Max dia.finished product Speed Pretwister Overtwister Post-straightener Capstan diameter Passages Pulling force Lay range 1 Lay range 2 Lay range 3 Bobbin drive Winding tension control Power Electronic Number of pay-offs 400 mm 56 mm Between pintles Pneumatic Electrical swivelling table 0,15-0,60 mm 160-270 kg/mm² 1,8 mm 4.000 tw/min 4 x 60 mm, outside machine 4 x 60 mm, inside machine 20+20 / 10 mm 106 or 90 or 73 mm 10+11 900 N 2,6..11,3 mm (73 mm capstan) 3,2..13,9 mm (90 mm capstan) 3,7..16,4 mm (106 mm capstan) Electromagentic clutch Permanent magnet DC motor 17 KW Reta drive 8
Pay-off type Pay-off diameter Pay-off OW. Pay-off system Back tension control Overall length Max width Weight Year Direction... Unrolling system 200 and 250 mm 242 mm Shaft 36 mm Shoe brake + dancer 6,6 m 1,25m 4,77 Tons 1990 Left to right
1 X SKET High Speed Double Twist Line for Steel, Model MSDN 250 (our ref. 13 17085) Complete high speed production line for steel wire stranding, wires ranging from 0,125-0,25 mm with max. strand dia. of 1,2 mm, wound on 250 mm bobbins. The line is composed of : * Pay-off frame for 10 bobbins 160/200 mm, unrolling type * Central wire braking capstan 100 mm * Guiding system for external wires * Lay-plate 1+6+12, with die holder * 2 x External twisters, 2+2/35 mm * 250 mm high speed double twist unit * Electrical panel * Control cubicle with counter & speed control Machine is equipped with pre-twister, post twister and post-forming device for getting perfect quality control. The rollers (35 mm) inside the machine can be inclined up to 10 degree for helping the wire twist. Unloading of bobbin is achieved by pneumatic table. Electronic drive & control panel includes required components. Take-up bobbin dia.... Overall width Pintle operation Bobbin unloading Wire diameter Wire tensile strength Max dia.finished product Speed Pretwister Overtwister Post-straightener Capstan diameter Passages Pulling force Laylength setting Lay range 1 Lay range 2 Lay range 3 Lay range 4 Lay range 5 Lay range 6 Lay range 7 250 mm 160 mm Between pintles Pneumatic swivelling table 0,125 to 0,25 mm 160-250 kg/mm² 1,2 mm 6.000 tw/min 2 x 35 mm, outside machine 2 x 50 mm, inside machine 20+20 / 10 mm 62-70-78-82-93-106-116 mm 12+12 1200 N Change gears 3,2..7,6 mm (62 mm capstan) 3,6..8,6 mm (70 mm capstan) 4,0..9,6 mm (78 mm capstan) 4,2..10,1 mm (82 mm capstan) 4,8..11,4 mm (93 mm capstan) 5,5..13,0 mm (106 mm capstan) 6,0..14,3 mm (116 mm capstan)lutch
Bobbin drive Power Electronic PLC Stop time Number of pay-offs Pay-off type Pay-off diameter Pay-off OW. Pay-off system Back tension control Overall length Max width Weight Year Direction Through clutch DC motor 18 kw Reta drive Siemens 6 to 8 sec. 10 units Unrolling system 160 mm (200 mm) 128 mm (180 mm) Shaft Shoe brake + dancer 7,2 m 1,3 m 3,8 Tons 1990 Left to right Left to right
1 X SKET High Speed Double Twist Line for Steel, Model MSD 250 (our ref. 13 17086) Complete high speed production line for steel wire stranding, wires ranging from 0,125-0,25 mm with max. strand dia. of 1,2 mm, wound on 250 mm bobbins. The line is composed of : * Pay-off frame for 10 bobbins 160/200 mm, unrolling type * Central wire braking capstan 100 mm * Guiding system for external wires * Lay-plate 1+6+12, with die holder * 2 x External twisters, 2+2/35 mm * 250 mm high speed double twist unit * Electrical panel * Control cubicle with counter & speed control Machine is equipped with pre-twister, post twister and post-forming device for getting perfect quality control. The rollers (35 mm) inside the machine can be inclined up to 10 degree for helping the wire twist. Unloading of bobbin is achieved by pneumatic table. Electronic drive & control panel includes required components. Take-up bobbin dia.... Overall width Pintle operation Bobbin unloading Wire diameter Wire tensile strength Max dia.finished product Speed Pretwister Overtwister Post-straightener Capstan diameter Passages Pulling force Laylength setting Lay range 1 Lay range 2 Lay range 3 Lay range 4 Lay range 5 Lay range 6 Lay range 7 250 mm 160 mm Between pintles Pneumatic swivelling table 0,125 to 0,25 mm 160-250 kg/mm² 1,2 mm 6.000 tw/min 2 x 35 mm, outside machine 2 x 50 mm, inside machine 20+20 / 10 mm 62-70-78-82-93-106-116 mm 12+12 1200 N Change gears 3,2..7,6 mm (62 mm capstan) 3,6..8,6 mm (70 mm capstan) 4,0..9,6 mm (78 mm capstan) 4,2..10,1 mm (82 mm capstan) 4,8..11,4 mm (93 mm capstan) 5,5..13,0 mm (106 mm capstan) 6,0..14,3 mm (116 mm capstan)lutch
Bobbin drive Power Electronic PLC Stop time Number of pay-offs Pay-off type Pay-off diameter Pay-off OW. Pay-off system Back tension control Overall length Max width Weight Year Direction Through clutch DC motor 18 kw Reta drive Siemens 6 to 8 sec. 10 units Unrolling system 160 mm (200 mm) 128 mm (180 mm) Shaft Shoe brake + dancer 7,2 m 1,3 m 3,8 Tons 1990 Left to right Left to right
1 X Maillefer 150 mm PVC/PE extruder 18 D, Model BM (our ref. 30 17155) 150 mm/ 18 MAILLEFER extruder suitable for PVC or PE compound. Machine includes screw, barrel, reducer and DC motor. Barrel is heated by electrical system. Electrical cabinet to be made new Extruder dia... L/D ratio Drive Number of screws Output 150 mm 18 D 120 kw DC 2, (1 PVC / 1 PE) Approx. 500 kg PVC Approx 350 kg PE
1 X NIEHOFF-ROSENDAHL Tandem insulation line, Model RT-A (our ref. 30 17087) Very productive and modern tandem line used for drawing and dual layer insulation of cores like telephone conductors or other small size cables. The line is composed of the following items: - Drawing 17 dies Niehoff MT200 - Resy filtration system for emulsion - Continuous Annealer Niehoff RT202 - Rosendahl main extruder 60-30D, ROEX 60-30 - Labotek hopper loader - 2 x Plasticolor masterbatch dosing unit, model 1000 - Rosendahl horizontal skin extruder 45-24D, on wheels - Labotek hopper loader - 2 x Plasticolor masterbatch dosing unit, model 2000-1 x Dual layer X-head, Rosendahl RKF 5-2-2 - Rosendahl telescopic hot cooling trough KS6/17 AA - Rosendahl SS cooling trough multipass KSU 6/90/300 D - Capacitance mesuring device SIKORA - SIKORA diameter gauge 1010 - SIKORA sparktester 2030-UL - Rosendahl dual automatic take up model DS5001 - Automatic system for bobbin loading/ unloading - Electrical panel SIEMENS S7 conrol system - Computer supervision control Plastic spools 500 mm diameter available Drawing machine... min finished dia. N of dies emulsion type Annealer Insulation material Main extruder dia. L/D ratio Drive Hopper loader Screw Second extruder dia. L/D ratio Drive Hopper loader Dosing unit Screw NIEHOFF MT200 0,4 mm 17 mix of water and oil NIEHOFF RT202 PE/PVC 60 mm 24D 62 KW available PVC/PE 45 mm 24D 38 KW available available PVC/PE
X-head Cooling length Diameter gauge Sparktester Double take up Bobbin sizes OD Drive Bobbin change bobbinloading unloading Supply voltage Dual layer +-30m Type LG 1010 15kV 500 mm 15KW automatic automatic 3 x 400V 50hz
1 X MAILLEFER Extrusion head, Model 35/45 mm (our ref. 31 17187) Complete big insulation or sheathing extrusion head previously used on a 150 mm extrusion line. There is provision for piggyback extruder inlet. Cable in... Cable out Flange... 35 mm 45 mm (with pressure tooling) adapted to 150 mm Maillefer extruder
1 X ZUMBACH 25 kv Sparktester, Model AST 25 (our ref. 31 17161) Heavy duty chain type spark tester for energy cables (or equivalent) up to 140 mm. It is very complete unit including foot, protection cover and AC voltage controller. It is in very good condition and perfectly maintained. Test Voltage... Voltage range Test frequency Max cable dia. Chain length AC 0-25kV 50/60 Hz 140 mm 200 mm
1 X MAILLEFER Automatic Double Take-up 1250 mm, Model KA II (our ref. 41 17185) Well known high speed reliable double spooler for continuous insulation of conductors. The unit is designed for automatic change over of wire at full speed. It can handle up to 1250 mm DIN bobbins. This Maillefer design is made for speed up to 1100 m/min. Bobbins are taken between pneumatic pintles and loading/unloading achieved manually with electrical lifting tables. Actually not equipped with electrical cabinet which can be quoted on request. Dancer must be added separately.max.oaw Bobbin weight Products Bobbin holding Loading/unloading Max. rotation speed Speed range control Max. linear speed Drive Power transmission Max Flange dia.... Max.OAW 1250 mm 950 mm +-3000 kg 0,35 mm² to 6 mm² Pneumatic pintles Electrical platform 558 rpm 4 shift gear box Max. 1100 m/min 2 DC motors 8kW / 2900 rpm
reducer and timed belts
1 X Home made Cantilever Type 2250 mm Pay-Off (our ref. 42 17089)
2 X MAILLEFER 2200 mm Portal braked type Pay Off, Model JD 22 (our ref. 42 17154) Good condition Maillefer 2200 mm Pay Off designed for sheathing or big insulation line. Equipment in good condition. Brake is protected under cover. Electrical cabinet located on top of the unit. Pay-off dia... OAW Weight Cable tension Up/Down Open/Close Mobile 2200 mm 1400 mm 6000 kg Pneumatic disk AC Electric motors AC Electric motors On floor
1 X Maillefer 480 kg, 1200 mm pulling caterpillar, Model QR (our ref. 45 17156) Strong caterpillar perfect for cable extrusion, rewinding, helping, pulling... The machine was used before in a 150 mm Maillefer insulation - sheathing line Caterpillar length... Pulling force Speed Drive Transmission Direction 1200 mm 480 kg 25-50-100-200 m/min DC motor 4 speed gear box L > R
1 X TETR Model PT 30-10 MK2 Fault Locator (our ref. 47 17157) Good condition Fault locator for LV cables. Previously used in a testing-rewinding line Test voltage... Current... 30 kv DC 10 ma
1 X Clinton Fault Locator, Model FL 111B (our ref. 47 17158) Stand alone fault locator using 20 KV DC current Test voltage... 20 kv DC
1 X BAUR Cable burst tester, Model ATG 6000 (our ref. 47 17159) Cable quality tester of very high quality level. Unit is readily available Burst voltage... 15 kv
1 X FONTIJNE Hydraulic repair press, Model TP 600 (our ref. 47 17160) Stand alone hydraulic press with heated plates, used previously in a cable testing and rewinding line. Plate dimensions... Daylight Cylinder diameter Stroke Hydraulic Pressure Pressure force Heating Power Heat control T range Total installed Pwr Equipment weight 2 x 400 x 400 mm 200 mm 160 mm 200 mm 300 bar 600 kn maximum 4,95 kw per plate 2 T controllers Up to 300 C 11 kva 370 kg
3 X HERAEUS 250 C Bench top lab drying oven (our ref. 47 17180) Stand alone 250 C small size lab oven for drying and other purposes T Set... Range Max never exceed... Potentiometer Up to 250 C 300 C
3 X MEMMERT 250 C bench top lab drying oven (our ref. 47 17181) Stand alone drying oven in good condition Operating T... 250 C max.
1 X Burn out oven for HFFR (our ref. 47 17182) Specific oven for HFFR burn out testing
1 X TRUMETER Wheel type Length counter (our ref. 50 17162) Stand alone length counter fitted with rubber coated wheel for good contact with cable. Wheel Diameter... Width Measurement speed Counting unit 160 mm 85 mm 1500 m/min max Electronic transducer
1 X LIFTRITE Electric Stacker Truck (our ref. 50 17179) Complete stand alone Electrrica stacker operated by internal batteries with self charging circuit and electrical plug for mains. Equipment fitted with a bobbin hadling device hanging with a chain. Capacity... 1T (estimated)
1 X FILTER BOX Talcum powder sucking device (our ref. 50 17183) Unit designed to suck the excess talcum powder. Unit is fitted with blower, ducts and tank
1 X General purpose spares and cabinets (our ref. 50 17186) Vast choice of general purpose spares, ie: - Fuses - Belts - Bulb lights - Drives - Electronic components - Fittings - Compressed air regulators - and many more Also included some cupboards
4 X REDEX Epicyclic Differential & Reducer, Model H50.4 (our ref. 50 17188) This famous epicyclic differential offers the combination of three motion elements and a wide range of reduction ratios providing so solutions to many electro-mechanical drive problems. REDEX Type: H 50.4 K 1.85 Date: 22.4.70 For more information, see technical details.
1 X HENRICH Twin-Wire Intermerdiate Drawing, Model 2 G-17-02-24. (our ref. 63 17146) Nice and well maintained drawing machine suitable for produce 2 copper annealed wires ranging 0,35 to 0,95 mm from 2,5 mm inlet or one wire from 3,5 mm down to 0,35...1,4 mm easily. Each wire is annealed separately and spooled on 630 mm bobbins. Spoolers are static type (vertical) allowing to run the line continously. The drawing section is tandem type ie. all capstans with same diameters. Capstans are ceramic type. The delivery includes : - Pay-off column for getting wires from 2 baskets - Drawing machine for 2 wires, tandem type, 17 capstans, G17-02-24 - Annealing section for 2 wires, 122 kva - 2 x dancer/accumulators for wire tension/change over - 2 x static spooler 630 mm, Model 1,2 B630 C 5643-2 x sets of conveyors for in/out bobbins - 2 x sets of tilting system for getting bobbins rolling on floor - Electrical panel for drawing/annealing machine - Electrical panels for each static spooler - Control cubicle Wire in (2 wires)... Wire out (2 wires) Wire in (1 wire) Wire out (1 wire) Speed 0,35-0,50 mm Speed 0,50-0,60 mm Speed 0,60-0,80 mm Speed 0,80-0,95 mm Number of capstans Wire elongation Capstan diameter Capstan material Number of shafts Drive Annealing power Annealing current Annealing voltage Pulleys dia in annealer 2 x 2,5 mm 2 x 0,35-0,95 mm 1 x 3,5 mm 1 x 0,35-1,4 mm 40 m/sec 38 m/sec 30 m/sec 22 m/sec 17 24% 150 mm Ceramic, very good 17 DC motor 155 kw Siemens 122 kva 1405 A max 50 V 250 mm
Accumulators Dancers Pulley diameters Qty of spoolers Spooler type Conveyor in Conveyor out Bobbin dia. Overall width Weight Traversing Winding Electronic drives PLC system Direction... PneumaticVertical 100 mm 2 Static, vertical 3 bobbins 3 bobbins 630 mm 475 mm 600 kg Hydraulic DC motor 27,5 kw Siemens Siemens Siemens Left to right
1 X BWE Cold welder Model CW 2E (our ref. 86 17177) BWE cold butt welder to be used with Al or Cu. Welder type... Range CW 2E 0.3 to 1.20 mm
1 X Ceramic tubes for strand welder (our ref. 86 17184) Set of ceramic tubes to be used in hot strand butt welders. Sizes available: 1.5² 2.5² 4² 6² 10² 16² 25² 35² 50² 70² 95² all in various quantities
3 X MAG 0,04-0,10 mm Enamel. Line, Model HSU-1 (our ref. 89 17147) Very nice and highly productive enameling line for superfine wires This line has the advantage to be very compact and complete with electrical panel. Line is composed of : - Pay-off - 24 Passes enamelling oven - Double spooler for bobbins of max dia. 250 mm - Electrical panel Range of diameter... VD Enameling furnace N passages Bobbin sizes Inline drawing unit Electrical panel... 0,04-0,10 mm 70 3 Max. dia. 250 mm 15 dies Available
4 X MAG 0,10-0,25 mm Enamel. Line, Model HES-2 (our ref. 89 17148) Very modern high speed enamelling line with in-line drawing and automatic double spooler, with automatic change over. The machine can be considered as 4 individual lines, built-in same frame for making 4 wires together. Drawing is cone type, 2 machines for 4 wires, and have 12 dies The lines are dates 1996 and have a VD factor of 90. Number of wires... Finished wire dia. VD ratio Spooler type Spool dia. Number of drawing dieswire elongation Year... 4 0,1-0,25 mm 90 Double spooler, full auto 160 mm and 250 mm 12 (cone type) 1996
2 X MAG 0,20-0,50 mm Enamel. Line, Model HES-4 (our ref. 89 17149) Complete horizontal line suitable to enamel in parallel up to 4 wires from 0.20 mm to 0.50 mm dia. The line includes drawing, annealing, coating, oven, HV continuous control device and spoolers. It is still installed and can be inspected anytime. Number of wires... Number of drawing/line Number of anneal/line Construction Outlet wire sizes VD factor Drawing Dies Spools Year of production... 4 4 1 Horizontal 0,2-0,50mm 90 15 DIN 200 up to 400 1996
1 X MAG 0,20-0,80 mm Enamel. Line, Model HN4/HL (our ref. 89 17150) Horizontal enamelling line is designed for the production of 8 normal & overcoated magnet wires in parallel within the range of 0.20 mm up to 0.80 mm dia. Line is still installed and was very well maintained N of lines... N of oven Diameter range manufactured VD ratio N of drawing dies 12 1 0.20 mm - 0.80 mm 40 15
1 X MAG 0,15-0,45 mm Enamel. Line, Model HZ 4 A (our ref. 89 17151) Horizontal enamelling line designed for single coating onto wires within the range of 0.20 mm up to 0.45 mm dia. Line configuration 1- Pay-off 2- Drawing unit 3- Annealing oven 4- Cooling unit 5- Drying unit 6- Enamelling oven 7- Enamelling oven 8- Lubrication unit 9 Take-up Line is still installed & has been very well maintained N of lines... N of drawing dies VD ratio Diameter range manufactured 2 8 50 0.20 mm - 0.45 mm
1 X MAG 0,08-0,25 mm Enamel. Line, Model HN2B (our ref. 89 17152) Horizontal enamelling line designed for dual coating onto wires within the range of 0.08 mm up to 0.25 mm dia. Line configuration 1- Pay-off 2- Drawing unit 3- Annealing oven 4- Cooling unit 5- Drawing unit 6- Annealing oven 7- Cooling unit 8- Drying unit 9- Enamelling oven 10- Enamelling oven 11- Lubrication unit 12- Take-up Line is still installed & has been very well maintained N of lines... VD ratio N of drawing dies Diameter range manufactured Spool dia 8 50 15 0.08 mm - 0.25 mm DIN 160 mm DIN 200 mm DIN 315 mm