ARGUS MEDIUM / HIGH PRESSURE P510, P520, P530 & P540 ARGUS ATEX/ IECEx Exi CERTIFIED & INDUSTRIAL PRESSURE SWITCH This rnge of swithes fetures unique swithse option injetion moulded from PPS engineering polymer. Relible nd proven design onepts from our estblished rnge of swithes hve lso been inorported. This provides very ompetitively pried, lightweight nd durble sensor. PRESSURE FEATURES 316 stinless steel or PPS engineering polymer swithse to IP66/IP67 stndrds. SIL 2 - IEC 61508 proven relibility 3 Internl djustment sle. Settings from 0.2 to 800 br. ATEX/IECEx Intrinsilly Sfe CE Ex II 1G Exi IIC T6...T2 T6...T5 T mb -50 to +78 C T5...T2 T mb -50 to +93 C Single or dul miroswith option.
P510 & P520 MEDIUM PRESSURE RANGES 1. With dul miroswithes minimum set point is 0.4 br. 2. With dul miroswithes minimum set point is 4.0 br. ADJUSTMENT RANGE (br) ADJUSTMENT RANGE (psi) MAX WORKING PRESSURE (br) DIAPHRAGM MAT NITRILE VITON DEADAND- FIXED (br) DIAPHRAGM MAT. NITRILE VITON DIAPHRAGM CODE SPRING CODE 1 0.2-8.2 5-115 32 40 <0.6 <0.8 1 T 2 3.0-11.0 45-145 32 40 <0.5 <1.0 1 R 6.0-22 90-320 32 40 <1.4 <2.2 1 P530 & P540 HIGH PRESSURE RANGES 3. Plese note 1/4 proess onnetions only on these rnges. With 1/2 proess onnetion mx. pressure is redued to br. ADJUSTMENT RANGE (br) ADJUSTMENT RANGE (psi) MAX WORKING PRESSURE (br) DEADAND FIXED (br) PISTON CODE SPRING CODE 0.8-16.8 4-20 12-232 60-300 <1.5 <2.0 S6 S6 T R 15-55 220-800 <5.5 S3 R 20-120 300-1 <12 S3 40-200 3 100-450 600-2900 1500-6500 1000 <20 <45 S2 S1 3 200-800 2900-11600 1000 <80 S7
PART NUMER REAKDOWN - MEDIUM PRESSURE MICROSWITCH 1 = 1x SPDT INDUSTRIAL & Exi 8 = 2x SPDT FLYING LEAD Exi & INDUSTRIAL SPRING CODE PLEASE REFER TO RANGE TALE MOUNTED 51 = CASE/CONDUIT DIAPHRAGM MOUNTING MATERIAL 52 = STEM MOUNTED A = NITRILE PROCESS CONNECTION = VITON - STD OPTIONS F = RACKET FOR PPS HOUSING S = RACKET FOR ST.ST HOUSING A = Exe JUNCTION OX (6 TERMINALS) = Exe JUNCTION OX (HIGH AM. TEMP) E = PIPE MOUNTING RACKET 2 R = MONITORING RESISTORS IF MORE THAN ONE OPTION IS REQUIRED IT SHOULD E WRITTEN AFTER THE PART NUMER PS518SPR81/R10N 1 /S6 F CERTIFICATION LENGTH OF CALE PROCESS WETTED PI = ATEX/IECEx Exi CONNECTIONS PARTS = DINPLUG, M20 PS = INDUSTRIAL FEMALE OR P_51 FEMALE M = MONEL M12 MALE 10N = STANDARD S = ST. ST. CASE MATERIAL 1 = 1 METRE ETC P_52 MALE PROCESS P = PPS (ENGINEERING POLYMER) X = CALE LENGTH 22N = 1/2 SP.P CONNECTIONS P_51 S = 316 STAINLESS STEEL OVER 9 METRES 24N = 1/2 NPT FEMALE 1 = 1/4 SP.P ELECTRICAL CONNECTION T = M20 FEMALE (INDUSTRIAL & IS) 2 = 1/4 NPT DIAPHRAGM CODE A = 1 or 2, 3 CORE CALES L = M12 x 1 CIRCULAR CONNECTOR 5 = 1/2 SP.P PLEASE REFER TO RANGE R = M20 MALE ST. STEEL S = 1/2 NPT MALE ST. STEEL 6 = 1/2 NPT TALE P = DIN EN 175301-803-A PLUG & SOCKET (WAS DIN 43650) MALE FOR P_52 USE 1 PART NUMER REAKDOWN - HIGH PRESSURE MICROSWITCH 1 = 1x SPDT INDUSTRIAL & Exi 8 = 2x SPDT FLYING LEAD, Exi & INDUSTRIAL MOUNTING 53 = CASE/CONDUIT MOUNTING 54 = STEM MOUNTED PROCESS CONNECTION SPRING CODE PLEASE REFER TO RANGE TALE SEAL MATERIAL A = NITRILE = VITON - STD D = PTFE* E = EPDM* *NOT AVAILALE WITH PISTON CODE S7. OPTIONS F = RACKET FOR PPS HOUSING S = RACKET FOR ST.ST HOUSING A = Exe JUNCTION OX (6 TERMINALS) = Exe JUNCTION OX (HIGH AM. TEMP) E= PIPE MOUNTING RACKET 2 R = MONITORING RESISTORS IF MORE THAN ONE OPTION IS REQUIRED IT SHOULD E WRITTEN AFTER THE PART NUMER PS531SPR11/R32N 3 /S6 F LENGTH OF CALE PROCESS PISTON CODE CERTIFICATION PROCESS PI = ATEX/IECE Exi CONNECTIONS 0 = DINPLUG, M20 PS = INDUSTRIAL FEMALE OR M12 P_53 FEMALE MALE 31N3 31N3 = 1/4 1/4 SP.P SP.P 32N3 = 1/4 NPT CASE MATERIAL 1 = 1 METRE ETC 32N3 33N3 = 1/4 1/2 NPT SP.P P = PPS (ENGINEERING POLYMER) X = CALE LENGTH 33N3 34N3 = = 1/2 SP.P NPT S = 316 STAINLESS STEEL OVER 9 METRES 34M3 = 1/2 NPT P_54 MALE ELECTRICAL CONNECTION T = M20 FEMALE (INDUSTRIAL & IS) P_52 41N3 MALE = 1/2 SP.P A = 1 or 2, 3 CORE CALES L = M12x1 CIRCULAR CONNECTOR 42N3 = 1/2 NPT R = M20 MALE ST. STEEL* S = 1/2 NPT MALE ST. STEEL P = DIN EN 175301-803-A PLUG & SOCKET (WAS DIN 43650) * CONNECTION TO E USED FOR Exe JUNCTION OX 3 PLEASE REFER TO RANGE TALE
TYPE P510 & P520 ARGUS MEDIUM PRESSURE SWITCH
3 TYPE P530 & P540 ARGUS HIGH PRESSURE SWITCH
ARGUS SWITCH AND JUNCTION OX ASSEMLY We hve extensive experiene gined over 50 yers of supplying most setors of industry nd believe these ustom ssemblies n ssist ost sving. A reent exmple of this ws n pproh mde to us by leding ompny from the fire protetion setor. They hd previously been mounting 6 swithes on bulkhed nd individully wiring eh swith bk to n Exe enlosure vi rmoured ble nd ertified ble glnds. Our solution, whih n be seen bove, ws to supply stinless steel Exe juntion box fitted with pressure swithes. We inorported mnifold vlves nd supplied omplete wired ssembly. This ws bolted to bulkhed nd the proess onnetions tthed. The onept sved them onsiderble time s the pressure swithes did not need to be individully mounted nd wired. In ddition, single order ws pled, when normlly seprte orders for swithes, juntion boxes nd mnifold vlves would hve been required. Our ustomer nd their inspetion uthority were so impressed with the initil system tht we reeived n order for 80 sets. 3 Our experiened engineers work losely with our ustomers enbling us to mintin our position s leder in the ontrol nd instrumenttion field. This lose reltionship hs resulted in swith rnges suh s the Argus s well s n expnding rnge of instrumenttion produts. We re in position to offer full rnge of swithes, inditors nd trnsmitters for industril or hzrdous re pplitions no mtter how rduous.
ARGUS SWITCH AND JUNCTION OX ASSEMLY The Argus rnge of pressure, temperture, differentil pressure, level nd flow swithes mnuftured by Pyropress re vilble Exi ATEX/IECEx ertifition. There is lso n industril version enbling one rnge of swithes to be used for ll pplitions. Pyropress re offering swith, trnsmitter nd juntion box ssemblies suited for hzrdous re nd industril pplitions. They re ustom designed nd re delivered fully ssembled nd wired. We n lso inorporte guges nd mnifold vlves nd dditionl terminls for other instrumenttion. The Argus rnge is vilble with orrosive resistnt robust PPS (engineering polymer) se or 316 stinless steel st, both possessing verstile rting of IP66/IP67. They n be used for mbient tempertures between -40 nd +85 C. Full detils of the omplete rnge n be found on our website www.pyropress.om. In keeping with our long stnding ustomer oriented philosophy, the entire orgnistion onstntly strives to improve the effetiveness of our servie. Computerised order proessing nd ommunition systems plus lrge stoks of stndrd nd speil prts, nd highly skilled workfore ensure tht your orders reeive prompt ttention from initil quottion through to shipment. A full prourement nd projet mngement servie ensures omplete turnkey pkge of equipment nd suppor 1 whih n be sought from single soure rther thn inurring. The ost nd inonveniene of multiple suppliers.
ARGUS ATEX/IECEx Exi & INDUSTRIAL SWITCHES INTRODUCTION The Argus pressure, differentil pressure, temperture, level nd flow swithes re designed for use in environments where explosive gses nd extremes of both high nd low mbient temperture n be present (e.g. gs fields, oil rigs nd hemil plnts et.) They hve been ATEX & IECEx ertified suitble for CAT 1 CE Ex II1G Exi IIC environments. These swithes re mnuftured from either PPS (engineering polymer) or high qulity investment st 316 stinless steel, both offering robust onstrution nd protetion to IP66/IP67 for use within hevily polluted industril nd mrine environments. Delrtion vilble for SIL2 - IEC61508 proven relibility. CALIRATION The design fetures simple form of librtion djustment ginst sle blok. This llows users to either order units with speifi setting, or stok mid rnge setting nd then djust to suit the pplition. On removl of the djustment over the djusting srew n be turned with Tommy br. The setting is red from the entre of the red inditing ring ginst the internl sle plte. Rottion to the left will inrese the set point nd to the right derese the set point. The djustment mehnism inorportes frition devie to ensure set point will not hnge under vibrtion onditions. (For ultr low pressure, vuum nd differentil pressure swithes the swithse in inverted. Set point djustment will be opposite to tht shown bove TECHNICAL SPECIFICATION Swithse nd overs: 316 Stinless steel or PPS (Polyphenylene Sulphide) + stinless steel fibres engineering polymer. Environmentl Protetion: Swithes hve been tested nd ertified by n externl test house to IP66/ IP67 in ordne with EN 60529:1992+A2:2013 nd IEC 60529:1989:A1:1999+A2:2013. Vibrtion nd shok prmeters: Swithes hve been tested nd ertified by n externl test house to S EN 60068-2-6 : 1995 (test F vibrtion) nd S EN 60068-2-27 : 1987 (test E shok). Miroswith: 1 or 2 SPDT (dul swithes mehnilly linked to give DPDT). Miroswith rting: 5 Amps @ 250 VAC resistive, 2 Amps @ 250 VAC indutive. 5 Amps @ 30VDC resistive, 2 Amps @ 30 VDC indutive. Aury: +/-1% t 20 C.
ELECTRICAL CONNECTION EXIA AND INDUSTRIAL Plug & Soket: DIN EN 175301-803-A (ws DIN 43650) Plug nd soket suitble for unrmoured ble up to 1.5mm2. Cble OD between 4.5mm nd 11mm (PG11). M20 x 1.5 ISO femle: 3 terminls suitble for bles upto 1.5mm2. M12 x 1 Cirulr soket: 3 ontts, A-oded plug to IEC61076-2-101. Flying led: 1 metre of 3 ore, for single swith (6.8mm dimeter) or 7 ore, for dul swithes (9.2mm dimeter) Silione insulted flying led with M20 x 1.5 ISO or 1/2" NPT mle threded onduit glnd (prt number ode R & S) or one, for single swith 1 metre of 3 ore ble or two, for dul swithes 1 metre of 3 ore ble supplied with no thred (prt number ode A). Longer led lengths n be requested nd rnge of juntion boxes n be supplied fitted nd wired to the swith. The stndrd Exe box hs n mbient temperture rnge of -40 to +55 C. Higher tempertures n be tered for. CERTIFICATION: ALL SWITCHES ARE CE MARKED IN ACCORDANCE WITH EU DIRECTIVES Exi Intrinsilly Sfe: ATEX 2014/34/EU mrked CE Ex II 1G Exi IIC T6...T2 G, T6...T5 T mb -50 to +78 C, T5...T2 T mb -50 to +93 C Speil onditions for sfe use. During live mintenne, djustment or serviing of the equipment the luminium prts my be exposed. Cre should be tken to void the risk of ignition from inendive impt or brsion sprks. The DIN plug over is mde of non-ondutive plsti mteril. Cre shll be tken to viod eletostti dishrge during mintenne, djustment or serviing. Clen only with dmp loth. Industril: 2014/35/EU (Low voltge diretive). TEMPERATURE LIMITATIONS Pressure, Vuum nd Differentil Pressure. Proess temperture: Diphrgm tuted unless otherwise stted -30 to +100 C (Nitrile) or -20 to +150 C (Viton). Piston tuted -30 to +100 C (Nitrile) or -20 to +150 C (Viton) or -40 to +150 C (PTFE) -35 to +100 C (EPDM). Ambient temperture: -40 to +85 C (-50 C & +125 C options refer to sles offie). Storge temperture: -40 to +85 C (For temperture, level nd flow swithes plese refer to speifi pges). Certifition temperture: (Exi only) T6...T5 T mb -50 to +78 C, T5...T2 T mb -50 to +93 C. Plese refer to ATEX & IECEx ertifite showing permitted proess temperture in reltion to temperture lss. Continuous development my result in hnges to speifition without prior notie AOUT PYROPRESS Our produts re designed to work in demnding nd hzrdous environments whih require fst nd ost effetive solutions in instrumenttion nd ontrol. Pyropress ontrol sensors provide sfe nd relible eletril swithing of lrm or ontrol iruits in response to hnges in temperture, pressure, differentil pressure, vuum, flow nd level onditions. T: +44 (0)1752 333933 sles@pyropress.om www.pyropress.om QUALITY To support the design of stte of the rt produts the ompny hs invested hevily in the ltest CNC tehnology. We re ble to produe our own omponents to high degree of ury ssuring relible nd onsistent qulity produt. PPSSC1011 issue 3