Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features Suitable for inert and corrosive liquid and gaseous media The valve stroke can be limited by means of adjustable limit switches Valve body and diaphragm are available in various materials Suitable for use as a control valve (with GEMÜ series 18118) The valve is insensitive to highly contaminated abrasive media Advantages Consistent control system and reliable opening and closing action Direct (0) ma control using the optional module GEMÜ series 18118 Optional mounting position Optional flow direction Available as an option: electrical position indication by means of a potentiometer
Working medium Any inert or corrosive gas or liquid, subject to the correct choice of body and diaphragm material. Max. perm. temperature of working medium: See datasheet "Techn. Information on Plastic Materials" Admissible temperatures Ambient temperature Storage temperature 10...+55 o C...+55 o C Nom. size Working press. (mm) (bar) (m 3 /h) ISO conn. (kg) 0 10 0 10 0 10 0 6 0 6 0 6/* All pressures are given as gauge pressures when applied upstream only. * DN with PTFE diaphragm bar K v value 5.6 8. 10.5.0.0 6.0 Weight.6.6.6 3.5 3.5. Body configuration Straight through D Power consumption 10 VA Rating Continuously rated Operating time Standard design appr. sec. Connections Spigot ends for solvent / butt welding DIN (PVCU, PP, PVDF) 0 Loose flange, PN 10, for flange sleeve DIN 1696 T 1 Loose flange for short stub ends DIN 1696 T3 0 Union ends with metric sockets DIN 7 Spigots for infrared butt welding (IR) for pipes acc. to DIN 8077 series Spigots for butt welding BCF (PVDF, DN ) 8 Spigot ends for solvent / butt welding inch 30 Union ends with imperial sockets inch Union ends with insert for butt welding acc. to DIN 1696 T 13 series 78 Protection class IP 65 acc. to DIN 0 Valve body material PVCU 1 ABS PP 5 PVDF Lining PPH natural 70 Lining PPH grey acc. RAL 70 71 Cable gland x PG 13.5 Diaphragm material Perbunan NBR Viton FPM EthylenePropylene EPDM 1 TFM/EPDM modified PTFE fully laminated 5
Supply voltages V ± 10% C 1 V ± 10% G 30 V ± 10% L Frequency Hz 60 Hz 3 Design Operating time approx. sec., PG glands, terminal block Operating time approx. sec., PG glands, terminal block, with potentiometer 609 Order example Type Nominal size (mm) Body configuration (D) Connection (reference number) Valve body material (reference number) Diaphragm material (reference number) Supply voltage (reference number) Frequency (reference number) Design (reference number) D 0 1 1 L 609 D 0 1 1 L 609 3
Actuator dimensions (mm) DN A A1 71 78 131 138 Mounting dimensions (mm) DN M f M 6 M 6 M 6 M 8 M 8 M 8.0.0.0.5.5.5
Body dimensions Solvent cement / butt weld spigots DIN ref. no. 0 (mm) Material ref.no. 1 Material ref.no. 5 Material ref.no. Material ref.no. 70, 71 DN L ød H H1 c H H1 c H H1 c H H1 c 1 1 1 19 78 16 19 31 39 16 19 7 16 19 9 16 19 9 Body dimensions Solvent cement and butt weld spigots INCH ref.no. 30, material ref.no. 1, (mm) DN L H H1 ød c 1/ 3/ 1 1 1/ 1 1/ 11 1 1 19 1..7.6. 8.3 60.3 7 30 39 Body dimensions Unions with metric sockets DIN ref. no. 7 (mm) Material ref. no. 1 Material ref. no. 70, 71 DN ød ød G LA LB H H1 LA LB H H1 3 53 60 83 103 1 1 1/ 1 1/ 1/ 3/ 116 13 1 16 166 19 116 13 1 1 16 16 6 10 8 Body dimensions Unions with imperial sockets INCH ref. no., material ref. no. 1 (mm) DN LA LB H H1 ød ød G 1/ 3/ 1 1 1/ 1 1/ 116 13 1 1 6 170 198 3 53 60 83 103 1..7.6. 8.3 60.3 1 1 1/ 1 1/ 1/ 3/ 5
Body dimensions PP butt weld spigots ref. no., material ref. no. 70, 71 (mm) DN L H H1 ød s c 19 19 1.9.3 3.0 3.7.6 5.8 Body dimensions PVDF butt weld spigots ref. no. 8 (mm) DN L H H1 ød c c1 s 9 9 35 38 38 38 37 37 37 36 36 36 6 6 6 1.9 1.9.. 3.0 3.0 6
Body dimensions Union ends with metric butt weld spigots ref. no. 78, material ref.no. 70, 71 (mm) DN LA LC H H1 ød ød G s c 116 13 1 1 3 8 8 3 3 53 60 83 103 1 1 1/ 1 1/ 1/ 3/ 1.9.3 3.0 3.7.6 5.8 37 39 1 3 3 Body dimensions with flanges ref. no. (mm) Body dimensions with flanges ref. no. 0 (mm) Material ref. no. 5, Material ref. no. 70, 71 Mat. ref. no. 5, Mat. ref. no 70, 71 DN L ø k ød ød ød H H1 ød H H1 L ø k ød ød ød H H1 H H1 1* 65 1 160 85 0 100 0 110 30 1 * no DIN length 95 105 1 1 1 1 1 1 3 1 61 73 90 69 69 1 61 73 90 16 1 1 38 85 100 110 1 95 105 1 1 1 1 1 1 3 1 61 73 90 69 69 Number of bolt holes 7
Overview of valve bodies for type Material PVCU (ref.no. 1) PP (ref.no. 5) PP (ref.no. 70, Kz 71) PVDF (ref.no. ) ABS (ref.no. ) Conn. (ref.no.) 0 7 30 0 0 0 0 7 78 0 0 7 8 78 30 DN DN DN DN DN DN Connection diagram GEMÜ open Synchron. motor closed With an integral potentiometer, wiring of switches S1 + S on terminals 6 and 7 is not necessary. Actual value pot. Option Technical data sheet brown black blue green yellow red open closed An integral potentiometer is required only when the actual value and set value are compared by a 3point controller. Subject to alteration 0/00 8808767 VALVES, ACTUATORS AND CONTROL SYSTEMS GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG FritzMüllerStr. D653 IngelfingenCriesbach Telefon +9 (0) 79/130 Telefax +9 (0) 79/13 email: info@gemue.de http://www.gemue.de