Globe Control Valve, Metal
|
|
- Peter McCormick
- 5 years ago
- Views:
Transcription
1 Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the GEMÜ 436 cpos positioner and process controller dependent on the control requirements (for features see page 8). The positioners are specially designed for GEMÜ valves and achieve optimum results when used as a system. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable sealing even after a long service life with high cycle duties. A wiper ring protects the gland packing against contamination and damage. GEMÜ µpos Features Linear or modified equal-percentage control characteristics Kv values from approx m³/h, depending on nominal size, valve seat and regulating cone design PID control system can be implemented with GEMÜ 436 Suitable for inert, corrosive*, liquid and gaseous media and steam Flanged bodies in SG iron GGG 40.3 and stainless steel.4408 to EN 09 and ANSI 5/50 Valve body 5-00, pressure rating to PN 40 Max. operating temperature 80 C Advantages Simple and fast commissioning Valve and positioner are optimally adapted to each other. (For positioner details please refer to the relevant data sheets) Standard gland packing suitable for vacuum up to 0 mbar (abs.) GEMÜ epos *see information on working medium on page Sectional drawing GEMÜ cpos
2 Technical data Working medium Corrosive, inert, gaseous and liquid media and steam which have no negative impact on the physical and chemical properties of the body and seal material. Max. perm. pressure of working medium see table Media temperature -0 to 80 C Max. permissible viscosity 600 mm²/s (cst) Control medium Inert gases, max. 60 C Filling volume Actuator size 0: dm³ Actuator size : 0.5 dm³ Actuator size : 0.65 dm³ Ambient conditions Max. ambient temperature 60 C Maximum permissible seat leakage class Seat seal Standard Test procedure Leakage rate Test medium PTFE DIN EN 60-4 VI air Metal DIN EN 60-4 IV air Pressure / temperature correlation for globe valve bodies Connection Material Max. allowable operating pressures in bar at temperature C* code code RT * The valves can be used down to -0 C RT = Room Temperature All pressures are gauge pressures. Pressure/temperature correlation for connection code 48: 5-40 see connection code 0, 50 see connection code 8. Example Kv value diagram Kv values [%] linear Kv values [%] Stroke [%] Stroke [%] equal-percentage modified The adjacent diagram shows the approximative curve of the Kv value characteristic. The characteristic may deviate dependent on valve body, nominal size, regulating cone and valve stroke. Note: Regulating needle: RAxxx - RCxxx (reduced valve seat) Regulating cone: 5-50 Regulating cage: Regulating needle Regulating cone Regulating cage
3 Nominal size Correlation Kv value, operating pressure, regulating cone number Valve body material:.4408 (code 37) and GGG 40.3 (code 90) Kv value [m³/h] Operating pressure [bar] * Actuator size Regulating cone number linear equalpercentage (mod.).0 0 RS0 RS RS00 RS RS0 RS RS03 RS RS04 RS RS08 RS RS05 RS RS09 RS039.0 RS06 RS RS363 RS RS07 RS RS RS RS35 * Observe the pressure / temperature correlation Nominal size Correlation Kv value, operating pressure, regulating cone number Valve body material:.4408 (code 37) Kv-Wert [m³/h] Operating pressure [bar] ** Actuator size Regulating cone number linear equalpercentage (mod.) 0.* 40 RA0 RA30 0.6* 40 RB0 RA30 0.5* 40 RB0 RB * 40 RB03 RB * 40 RC0 RC30.00* 40 RC0 RC RD0 RD RE0 RE RD0 RD RE0 RE RF0 RF RE03 RE RF0 RF RG0 RG RF03 RF RG0 RG RH0 RH RG03 RG RH0 RH RJ0 RJ RH03 RH RJ0 RJ RK0 RK30 * metal seated (with no soft seat) ** Observe the pressure / temperature correlation 3
4 Order data Body configuration /-way body Connection Code D Code Flanges EN 09 / PN6 / form B, length EN 558, series, ISO 575, basic series 8 Flanges EN 09 / PN5 / form B, length EN 558, series ISO 575, basic series 0 Flanges EN 09 / PN40 / form B, length EN 558, series ISO 575, basic series Flanges ANSI CLASS 5/50 RF, length EN 558, series, ISO 575, basic series 39 Flanges drilled according to JIS 0K ( 5-40), Flanges drilled according to JIS 0K ( 50), length EN 558, series 0, ASME/ANSI B 6.0 table, column 6 48 Control function Code Normally closed (NC) Double acting (DA) 3* Double acting (normally open) 8* * R-No. on request Actuator size Flow Code Actuator 0 piston ø 50 mm under the seat 0 Actuator piston ø 70 mm under the seat Actuator piston ø 0 mm under the seat Flow under the seat Valve body material Code.4408, Investment casting 37 EN-GJS LT (GGG 40.3) SG iron 90 Regulating cone R-No. For the regulating cone no. (R-No.) - linear or equal-percentage (mod.) please refer to the table Seat seal Code PTFE 5 PTFE, glass fibre reinforced 5G Steel (standard up to Kv value.00 m³/h) 0* * R-No. on request Order example 5 D RS034 Type Nominal size 5 Body configuration (code) D Connection (code) 0 Valve body material (code) 37 Seat seal (code) 5 Control function (code) Actuator size (code) Regulating cone (R-No.) RS034 For the technical data and order data of the positioners please refer to data sheets GEMÜ 434, 435 and 436. Please also note the table on the last page. 4
5 Actuator dimensions / Installation dimensions [mm] Actuator dimensions Actuator size øb M A G M6x 70 G / M6x 86 G /4 68 Mx.5 49 G /4 SW metric Installation dimensions [mm] / weight of valve [kg] Actuator size Actuator size + 4 Actuator size CT Weight CT Weight CT Weight M CT A G G SW 5
6 Dimensions - GEMÜ [mm] GEMÜ with 434 µpos Actuator size Control function øb HAR ØB HAR 6
7 GEMÜ with 435 epos Actuator size Control function øb HAW HAR LAR and and and and and and and and and and u and and and HAR 90 LAR Ø B HAW
8 Dimensions - GEMÜ [mm] GEMÜ with 436 cpos Actuator size Control function øb HAR 0, , , Ø B HAR 64,5 8
9 D L K Body dimensions [mm] Flanges, connection code 8, 0,, 39, 48 Valve body material.4408 (code 37), EN-GJS LT (code 90) Connection code 8, 0, Connection code 39 Connection code 48 Number of bolts FTF ø D ø K ø L FTF ø D ø K ø L FTF ø D ø K ø L For materials see overview on page 0 Weight [kg] FTF Flanges. connection code 8, 39 Valve body material.4408 (code 37), EN-GJS LT (code 90) FTF ø D ø K ø L Connection code 8 Connection code 39 Number of bolts ø D ø K ø L Number of bolts For materials see overview on page 0 Weight [kg] K D L FTF 9
10 Connection code Material code Overview of metal bodies for GEMÜ X - X X X X 0 - X - X X X X 5 - X - X X X X 3 - X X X X X X X X X X X 50 X X - - X X X 65 X X - - X X - 80 X X - - X X - 00 X X - - X X - 0
11 Information - Specifications
12 Information - Specifications - GEMÜ standard regulating cones
13 Positioner functions / features 434 µpos 435 epos 436 cpos Controller type Positioner X X X Process controller X Control air flow Version 5 l/min 50 l/min 50 l/min Version 90 l/min 00 l/min Operation Local display / keypad X X Status display X X X Web browser user X Field bus (Profibus DP, Device Net) X Signal 4V DC / 3-wire X X X Body Plastic X X Aluminium / industrial X Functions Automatic initialisation X X X Alarm / error outputs X X Min/max positions adjustable X X GEMÜ 434 µpos not available for actuator size Other GEMÜ control valves Technical data sheet Should there be any doubts or misunderstandings, the German version of this data sheet is the authoritative document! GEMÜ µpos GEMÜ epos GEMÜ epos GEMÜ µpos For further globe valves, accessories and other products, please see our Product Range catalogue and Price List. Contact GEMÜ. GEMÜ epos Subject to alteration 0/ VALVES, MEASUREMENT AND CONTROL SYSTEMS GEMÜ Gebr.Müller Apparatebau GmbH & Co.KG Fritz-Müller-Str. 6-8 D Ingelfingen-Criesbach Telefon +49(0)7940/3-0 Telefax +49(0)7940/3-9 info@gemue.de
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationGlobe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationGlobe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More information555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic
Angle Seat Globe Valve, Metal Aseptic Construction The GEMÜ 555 pneumatically operated 2/2-way valve has a piston actuator and is designed for pure steam applications. The valve has a PTFE seat for tight
More informationGEMÜ 539 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More information550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal
Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationControl Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request
Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationGEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationDiaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More information653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More informationTank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
More informationControl valve BioStar control
Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
More informationFull Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
More information790, 791, 797, 798. Ball valve, metal
Ball valve, metal Construction GEMÜ 790, 791, 797 and 798 are 3-piece 2/2-way ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8-100). This flange enables both pneumatic and electric actuators
More informationK715, 711, 728, 751. Ball Valve, Stainless steel
Ball Valve, Stainless steel Construction GEMÜ 711, 728 and 751 are 3-piece 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). The top flange enables both
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationSolenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More informationButterfly Valve, Metal
Butterfly Valve, Metal Construction The motorized GEMÜ 2/2 way butterfly valve has a low maintenance electrical actuator with a powerful reversible DC motor. The secondary gear in the motor, consisting
More informationButterfly valve, Metal
Butterfly valve, Metal Construction The GEMÜ VICTORIA is a wafer pattern butterfly valve with an elastomer liner. It is available in nominal sizes DN 50-600 and in various body versions such as Wafer,
More informationBall Valve, Metal - Sanitary
all Valve, Metal - Sanitary Construction GEMÜ 740, 741 and 748 are 3-piece 2/2-way metal ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). They are particularly suitable for sanitary/hygienic
More informationGEMÜ ADH, ADP, MSC, RC0 Accessories for quarter turn valves
GEMÜ H, P, MSC, RC0 ccessories for quarter turn valves Mounting sleeves Mounting sleeve, square geometry SW actuator SW shaft Mounting sleeve, star-shaped geometry SW actuator SW shaft Length Länge Length
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More informationGEMÜ 649 esydrive Motorized diaphragm valve
esydrive Motorized diaphragm valve Features Hermetic separation between medium and actuator Installation for an optimised draining is possible Open/close function, positioner and process controller Variable
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationFlowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
More informationDR/SC. Quarter Turn Actuator, pneumatically operated
Quarter Turn Actuator, pneumatically operated Construction The pneumatic quarter turn actuators operate according to the double piston rack and pinion principle. Double acting or single acting versions
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading worldwide Industrial and Process Valve manufacturer, supplying customers in the Pharmaceutical,
More informationFlowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media
More informationSolenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
More informationButterfly Valve Metal
Butterfly Valve Metal Construction The GEMÜ 490 butterfly valve is lined with TFM (PTFE)/PFA to suit aggressive chemical applications. It is based on the design of concentric soft seal valves. The construction
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More information2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN
2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
More information/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic
Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems.
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More informationIntelligent Positioner
Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.
More information2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
More informationMaxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
More informationButterfly Valve, Metal
utterfly Valve, Metal Construction GEMÜ type D480 is a butterfly valve with various versions. It is available in nominal sizes DN 25 1600, various body versions (Wafer, Lug and U section) and in a large
More information2/2 way Globe Control Valve, threaded connection, 3/8" 3"
2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More informationGEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
More informationProduct Range Valves, Measurement and Control Systems
Product Range Valves, Measurement and Control Systems Innovative technology The GEMÜ Group is a leading manufacturer of valves, measurement and control systems employing over 1700 members of staff worldwide.
More informationBR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
More informationTop-Guided Single Seated Control Valves (Rating : ANSI 600 or Less)
No. SS2-8-0 Top-Guided Single Seated Control Valves (Rating : ANSI 0 or Less) OVERVIEW Model VST control valves are suitable for use in fluid with slurry because of its one side guiding construction. Guide
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationMaxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R
Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More information2/2 way Globe Control Valve, flange connection, 1/2" 4"
2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationLined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationType 1a Globe Control Valve
PTFE-lined Type 1a Globe Control Valve Application: PTFE-lined control valve for corrosive media, particularly for severe requirements in chemical applications: Valve sizes DN 25 to 150 or NPS 1 to 6 Pressure
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves,
More informationARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More information