2/2 way Globe Control Valve, threaded connection, 3/8" 3"
|
|
- Derick Gregory
- 5 years ago
- Views:
Transcription
1 2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent control characteristic Ultra compact design Type 2712 can be combined with... Type 8630 Type 1067 Type 8635 Type 8323 Type 8030 Type ST20 Positioner or process controller Controller SideControl Controller SideControl Pressure transmitter Flow sensor Temperature sensor The 2712 system has been specifically engineered for reliable control in applications where control accuracy is paramount. The 2712 is made from an all stainless steel valve body combined with Burkert s new generation universal pneumatic actuator. Each globe valve body can be fitted with three to five sizes of trim sets. These parabolic trims provide a reliable and repeatable characteristic to vary the flow. The control cones are available in either stainless steel or with a durable PTFE seal for tight shut-off. When actuated by the 1067/8635 SideControls or the 8630 TopControl it forms a unique control valve system which can be operated as either a simple accurate positioner or an autotune PID process controller for flow, temperature or pressure. Proven Applications Fine chemical pressure and flow control High accuracy test bench equipment Food, beverage and pharmaceutical CIP/SIP and auxiliary processes with steam Pharmaceutical Sterilizers Precision distillation apparatus Sterile Packaging Machinery Technical data Materials Body Cast stainless steel 316L (conform to ) Actuator PA (polyamide) (PPS on request) Plug sealing SS/SS (stainless steel/stainless steel) PTFE/SS Seat leakage acc. Shut off class IV for SS/SS IEC 534 4/EN 1349 Shut off class VI for PTFE/SS (266 F Max.) Process media gases and For neutral gases, water, alcohols, oils, fuels, liquids (vacuum version on request) hydraulic liquids, salt solutions, lyes, organic solvents, steam, 150 PSI / 365 F (10.3 bar /185 C) Viscosity Max. 600 mm 2 /s; 600 cst;.93 in 2 /s Packing gland PTFE V rings (silicone grease) with spring compensation Nominal pressure PN 25 (body) Temperatures Fluid 14 F to 365 F (-10 C to +185 C) (266 F for PTFE/SS sealing recommended) Ambient 1) 14 F to 140 F (-10 C to +60 C) Actuators F 80 to H F to 122 F (-10 C to +50 C) Actuators K-175 and L-225 Control media Compressed air (40 micron fi lter) Pilot pressure to PSI (5.5 to 7 bar) Actuators F-80 to H to 87 PSI (5 to 6 bar) Actuators K-175 and L-225 Pilot air ports G 1/4 stainless steel (SS) Flow direction Below seat Mounting position Any, preferably upright Interchangeable seat Different Cvs-values per port size, see table p.4 Control ratio (Cvs/Cv0) 50:1 25:1 for orifi ce DN6 10:1 for orifi ce DN4 Port connections NPT to ANSI B ) high temperature version on request usa.com Page 1/8
2 Globe Valve Systems A continuous globe valve system consists of a continuous globe valve Type 2712 and a valve actuation system SideControl Type 1067 or Type 8635 or TopControl Type The positioners are only delivered in combination with an actuator as a part of a complete control valve. The following information is necessary for the selection of a complete Globe Valve System: Item no. of the continuous globe valve Type 2712 (see Ordering chart) Item no. of the desired positioner Type 8630, 1067 or 8635 (see separate datasheets) Example for variations of continuous Globe Valve Systems Globe valve Type 2712 with required process connection Positioner / Controller Globe valve with required body and port connection Globe Valve TopControl System Globe Valve SideControl System Globe Valve SideControl System Valve actuation system: TopControl Type: 8630 TopControl Continuous Type 8630 forms a mechanical and functional unit with the pneumatic actuator. The main parts of the TopControl Continuous are: Positioner and/or process controller in one device, integrated PID (as option) Linear potentiometer connects to stem with zero backlash for precise position control. Microprocessor controlled electronics for signal processing, setpoint/process value comparison Pneumatic positioning system for single and double acting actuators with integrated pilot valves New process tune function reduces time and costs during PID parameter set up. 0/ ma 0...5/10 V Valve actuation system: SideControl 3 wire Type: 1067 SideControl Type 1067 is a 3 wire process controller and positioner composed of the main functional groups position measuring system, electropneumatic actuator system and microprocessor electronics. Main functional groups of the SideControl are: Positioner and process controller in one device, integrated PID Linear potentiometer connects to stem with zero backlash for precise position control. Microprocessor controlled electronics for signal processing, setpoint/process value comparison Pneumatic positioning system for single and double-acting actuators with integrated pilot valves Remote versions available for distances up to 330 ft between valve and positioner The software function autotune implemented enables automatic adaptation of the positioner to the control valve used. 0/ ma 0...5/10 V Valve actuation system: SideControl 2-wire, intrinsically safe Type: 8635 SideControl Type 8635 is a 2-wire electropneumatic process controller and positioner for pneumatically operated process valves. As an alternative, communi-cation can be effected via HART or PROFIBUS PA. Signal processing, control and drive of the internal positioning system are carried out by microprocessor controlled electronics The software function autotune implemented enables automatic adaptation of the positioner to the control valve used Parametrization and operation are performed comfortably via three keys and a display with plain text, or via HART and PROFIBUS PA To build up a decentralized control system, SideControl is equipped with a process controller with PID behaviour. In this case, a process control loop is superimposed on the positioning loop in a cascade structure The compact, robust design, the housing is suitable for use in chemical and processengineering New process tune function reduces time and costs during PID parameter set up. Page 2/8
3 Technical data Cvs values Port size Actuator (connection) size Orifice DN (seat) [mm] [mm] [mm] F F F F G H H K L Flow curve and description Cv/Cvs [%] Stroke [%] For detailed values please see table below Remarks on the flow characteristic Equal percent parabolic plug for the orifices DN8...DN100 Linear plug for the orifices DN4 and DN6 Flow characteristic runs within DIN/IEC Theoretical control ratio (Cvs/Cvo): 50:1 for the orifices DN8...DN100 25:1 for the orifice DN6 10:1 for the orifice DN4 CVR value at 5% of stroke for DN > 10 mm CVR value at 10% of stroke for DN 10 mm (CVR value = smallest Cv value at which the gradient tolerance to DIN/IEC is still complied with) Cv values Port size Orifice (seat) Actuator Stroke [%] (connection) [mm] [inch] [mm] [inch] /8 4 1/8 F /16 F /4 F /8 F /2 4 1/8 F /16 F /4 F /8 F /2 F /4 10 3/8 F /2 F /4 F /2 F /4 F F / G /4 G /2 G /4 H /2 H H / /2 H H /2 H /2 K K /2 K L /2 L L Page 3/8
4 Materials 3/8" 2 1/2" (actuator sizes F 80 to H 125 mm) Adapter : Stainless steel 303 Actuat tor: PA polyamide (PPS on request) Pilot air ports : Stainless steel 303 Spring: V-seal ls: PTFE Wiper: : Stainless steel PTFE Nipple: Stainless steel 316 Spindl le: Stainless steel 316 Pin: Plug : Valve seat: Valve body: Stainless steel Stainless steel 316 Ti (+PTFE disc for soft seat sealing) Stainless steel 316 Ti Cast stainless steel 316L 2 1/2" 3" (actuator sizes K 175 and L 225 mm) Adapter: Stainless steel 303 Actuator: PA polyamide Pilot air ports: Stainless steel 303 V-seals: PTFE Spring: Stainless steel Nipple: Stainless steel 316 Spindle: Stainless steel 316 Pin: Stainless steel 316 Plug: Stainless steel 316 Ti (+PTFE disc for soft seat sealing) Valve seat: Valve body: Stainless steel 316 Ti Cast stainless steel 316L Page 4/8
5 Ordering chart: Globe Valve System Port NPT: ANSI B1.20.1, flow below seat *seal system: SS/SS: plug stainless steel/ seat stainless steel PTFE/SS: plug PTFE/ seat stainless steel Control function Port size (tube) [mm] [inch] Orifice DN (seat) [mm] [inch] Actuator size Ø [mm] Op. pressure +365 F [PSI] Item no. seal system SS/SS* Item no. seal system PTFE/SS* A 10 3/8 8 1/4 F C T A 10 3/8 F T L 15 1/2 8 1/4 F Y F 10 3/8 F F Q 15 1/2 F S M P 20 3/4 10 3/8 F C Y 2/2 way, NC by 15 1/2 F G K spring return 20 3/4 F C X /2 F E H 20 3/4 F B V 25 1 F M V /4 20 3/4 G S L 25 1 G R J /4 G T U / G V W /4 G X X /2 G L L /4 H D D /2 H S V 50 2 H S S / /2 H H /2 H /2 K K /2 K L /2 L L B 10 3/8 8 1/4 F A Z B 10 3/8 F H J 15 1/2 8 1/4 F V V 10 3/8 F V D 15 1/2 F M U P 20 3/4 10 3/8 F T N 2/2 way, NO by 15 1/2 F F S spring return 20 3/4 F U A /2 F M Y 20 3/4 F S M 25 1 F W X /4 20 3/4 G G J 25 1 G P Q /4 G H A / G U M /4 G W W /2 G F N /4 H M U /2 H Q C 50 2 H L D / /2 H H /2 H /2 K K /2 K K /2 K K Page 5/8
6 Dimensions DN (1/2" 2 1/2") C øe M F G H J HG1 HG2 K TM LM Port size [mm] HG1 HG2 M HG2 M All actuators NPT Port Actuator size [inch] size C E F H K J HG LM Size TM 3/8 F G 1/ NPT 3/ /2" F G 1/ NPT 1/ /4" F G 1/ NPT 3/ " F G 1/ NPT /4" G G 1/ NPT 1 1/ /2" G G 1/ NPT 1 1/ " H G 1/ NPT /2" H G 1/4 30 NPT 2 1/2 2 1/2" K G 1/4 24 NPT 2 1/2 3" L G 1/4 24 NPT 3 1) Approximately weight with positioner See above chart Page 6/8
7 Further process connections ends Weld ends Tri-Clamp Customized* G NPT RC ISO 4200 DIN S2 BS 4825 ASME BPE SMS 3008 ISO 2852 SMS 3017 DIN BS 4825 *e.g. one side with fl ange, other side Tri Clamp Spare parts for Type 2712 DN (on request) Port size 10 to 65 in combination with actuator size F 80 to H 125 Port size 65 to 80 in combination with actuator size K 175 and L 225 Trim kit Plug set Plug set Sealing part set Trim kit Page 7/8
8 Specification sheet for control valves: Please fill out and send to your local Burkert Sales Center* with your inquiry or order = mandatory fields to fill out Quantity Required delivery date Operating data Site of control Measuring and control task Pipeline DN PN Pipe material Process medium Type of media Liquid Steam Gas Min Standard Max unit Flow rate (Q, QN, W) 1) Temperature at valve inlet T1 Absolute pressure at valve inlet P1 Absolute pressure at valve outlet P2 Steam pressure Pv Kinematic viscosity (ν) mm 2 /s or cst Dynamic viscosity (η) mpa.s or cp Standard density Kg/m 3 Max. sound level accepted Valve features Control valve type Globe Angle seat Diaphragm Ball valve Butterfl y Other Body material Stainless Steel PVC PP PTFE Other Surface finish 2) internal external db (A) Seat sealing material Metal PTFE EPDM 2) FKM 2) Nominal pressure Nominal size PN DN Type of connection Flange Socket union n Welded Int. thread Ext. thread Tri-Clamp Standard connection ISO DIN ANSI JIS Other Function NC NO Double-acting 1) standard unit Liquid Q = m 3 /h; Steam W = Kg/h; Gas QN = Nm 3 /h Pilot pressure min. max. 2) Only diaphragm valve Positioner / Controller Type wire Type wire Type wire Valve mounted Power supply 24 VDC Communication Setpoint/ output analog signal Remote version Positioner version Input 0/4-20 ma / 0-10 V Output 4-20mA or Binary PID Controller version 3) Input measuring signal 4-20 ma 3) same setpoint for Input and Output signal as for Positioner version Company Customer No Address Postcode/Town Power supply 24 VDC Communication Setpoint/ output analog signal or via BUS Profi bus DP Device Net Positioner version Input 0/4-20 ma / 0-5/10 V Output 4-20mA or/and Binary PID Controller version 3) Input measuring signal 4-20 ma / Pt100 / Frequency Please do not forget to fill in the customer data below Contact person Department Tel./Fax Standard EExia Power supply 24 VDC via setpoint or BUS Communication Setpoint/ output analog signal or via BUS Profi bus PA Hart Positioner version Input 4-20 ma Output 4-20mA or/and Binary PID Controller version 3) Input measuring signal 4-20 ma / Pt100 / Frequency In case of special application conditions, We reserve the right to make technical 0602/2_US-en please consult for advice. changes without notice. Page 8/8
2/2 way Globe Control Valve, flange connection, 1/2" 4"
2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More information2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More information2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN
2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way ngle-seat Valve with stainless steel design for media up to +180ºC, DN 13-50 Excellent control characteristic and high fl ow rates High cycle life Clean design for optimal use in hygienic environment
More informationType Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More information+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve
Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series
More informationFlow Controller, flow control system for gases
Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More information2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25
2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More information2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
More informationGlobe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system
Globe Valve System for continuous control Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8802/2301 + = Type 2301 Series Globe valve Type
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More information2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
More informationTandem valve, welded valve configuration
Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation
More information2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port connection DN
Type 2731 can be combined with... 2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port DN 15-100 Hermetical separation of fluids from the operating mechanism by diaphragm
More informationAngle-Seat Valve System for on/off control. Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system
Angle-Seat Valve System for on/off control Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8801/2100 + = Type 2100 angle-seat series
More informationTopControl Continuous
860 Electropneumatic positioner for pneumatically actuated control valves Type 860 can be combined with... Type 7 Type 70 Types 70/7/7K Type 800 Piston-controlled globe valve Piston-controlled angle seat
More informationPneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
More informationElectromotive process valve - 2-way angle-seat control valve
Electromotive process valve - 2-way angle-seat control valve good and fast control weather, impact and vibration resistant design easy cleaning by its design according hygienic demands options many diagnostic
More information2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
More information2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100
2/2-way Diaphragm Valve, forged valve body, weld end and clamp, DN 8-100 Type 2031 with weld end Type 2031 can be combined with Type 2031 with clamp Hermetical separation of fluids from the operating mechanism
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationFluid Control System with Diaphragm Valve For Polluted, Dirty, Aggressive and Ultra-Pure Fluids
TOP Control System / ON/OFF and Proportional /-Way, / Advantages/Benefits Decentralized Intelligence for ON/OFF and Proportional control of processes Customized System Solutions for Easy LINK and Easy
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationPneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More information2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam
cryogenic extended stem 2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam Type 2000 can be combined with Spring return closed or open, double-acting, manual operation Materials:
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationGEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationY-Pattern Valve for Proportional Control Type 2632
Stainless Steel, /"-" Advantages / Benefits Ultra compact design - Low weight Automatic self-adjustment of basic parameters Integrated PID controller User-friendly operation - LCD display - Keypad interface
More informationBall Valves in cast 316 SS multi-port, bolted construction
65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationElectromotive process valve 2-way globe control valve
Electromotive process valve 2-way globe control valve High precise and fast flow control Several Kvs value per port size due to removable trim kit Weather, impact and vibration resistant design Easy cleaning
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationPneumatically operated zero dead volume T-valve ELEMENT for decentralized automation
Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation Zero deadleg monoblock without welds Diaphragm hermetically separates the fluids from the operating mechanism Easy integration
More informationSolenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections
/-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationPneumatically operated 2/2 way diaphragm valve with stainless steel actuator
Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Flow optimized and deadleg free stainless steel cast or forged bodies Media separation with different diaphragm materials Trusted
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationModular pneumatic valve island
Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with
More informationElectromotive process valve - 2-way globe control valve
Electromotive process valve - 2-way globe control valve Options high precise and fast flow control several Kvs value per port size due to removable trim kit weather, impact and vibration resistant design
More informationGEMÜ 539 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationProcess and control valves
System Catalog 2 Solenoid valves I Process and control valves I Pneumatics Sensors I MicroFluidics I MFC and proportional valves The smart choice of Fluid Control Systems All technical details were valid
More informationPressure Regulator compact 8011
Pressure Regulator compact 8011 GS 3 series 1/2 up to 6 Self operated regulation of inlet and outlet pressures of neutral through to highly aggressive media in process engineering, chemical industries
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationFunction Continuous control version: Type 8630 Position control or process control with an integrated PID controller
TopControl System 23/3 2/2-Way, DN 5...5 mm dvantages/benefits Decentralized Intelligence for On/Off and Continuous control of processes Customized System Solutions for Easy Link and Easy Networking together
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationSeries V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator
Series V2001 Valves Clean Tech Type 3321CT Globe Valve with pneumatic actuator DIN version Application Compact control valve for the process industry Valve size DN 15 to 50 Pressure rating PN 16 to 40
More informationPneumatic control unit for decentralized automation of ELEMENT process valves
890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationSTERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
More informationGuth modulating valves. The sophisticated solution
Guth modulating valves The sophisticated solution VSR-modulating valves with diaphragm actuator Modulating valves are used in process technology to control process parameters such as temperature, pressure
More informationAir Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationGlobe Control Valve, Metal
Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the
More informationModular pneumatic valve unit
Modular pneumatic valve unit Compact design Modular configuration High flexibility Type 8640 can be combined with Simple exchange of valves (with option P-shut-off - also possible during operation) Type
More informationPython Series Control Valves
Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases
More informationAirLINE and AirLINE Quick electrical/pneumatic Automation System
AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility
More information2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
More informationSpira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationCE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
More informationRemote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Type 8644 can be combined with... Fully compatible with WAGO I/O Combination of Fieldbus, pilot valves and I/O modules High
More informationSeries V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
More informationINSERTION flowmeter with paddle wheel, ELEMENT design
INSERTION flowmeter with paddle wheel, design Up to PN, size of measurement pipes: DN to DN400 Configurable outputs: one or two transistor output(s) and single or dual 4... ma analog output(s) Removable
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationSPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
More informationSPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More informationKP-28 & KT-28 Two Way Control Valve
CRN-CANADA PASCO KP-28 & KT-28 Two Way Control Valve Fluid Control For Sustainable Future Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection.
More informationComponents for the Food Processing and Pharmaceutical Industries
CATALOG Components for the Food Processing and Pharmaceutical Industries SMART IN FLOW CONTROL. Components for the Food Processing and Pharmaceutical Industries Catalog 2018 Overview Overview Application
More information